def amqp_changed(relation_id=None, remote_unit=None):
singleset = set(['username', 'vhost'])
host_addr = rabbit.get_unit_ip()
if rabbit.leader_node_is_ready():
relation_settings = {'hostname': host_addr,
'private-address': host_addr}
# NOTE: active/active case
if config('prefer-ipv6'):
relation_settings['private-address'] = host_addr
current = relation_get(rid=relation_id, unit=remote_unit)
if singleset.issubset(current):
if not all([current.get('username'), current.get('vhost')]):
log('Relation not ready.', DEBUG)
return
# Provide credentials to relations. If password is already
# available on peer relation then use it instead of reconfiguring.
username = current['username']
vhost = current['vhost']
admin = current.get('admin', False)
amqp_rid = relation_id or get_relation_id()
password = configure_amqp(username, vhost, amqp_rid, admin=admin)
relation_settings['password'] = password
else:
# NOTE(hopem): we should look at removing this code since i don't
# think it's ever used anymore and stems from the days
# when we needed to ensure consistency between
# peerstorage (replaced by leader get/set) and amqp
# relations.
queues = {}
for k, v in current.iteritems():
amqp_rid = k.split('_')[0]
x = '_'.join(k.split('_')[1:])
if amqp_rid not in queues:
queues[amqp_rid] = {}
queues[amqp_rid][x] = v
for amqp_rid in queues:
if singleset.issubset(queues[amqp_rid]):
username = queues[amqp_rid]['username']
vhost = queues[amqp_rid]['vhost']
password = configure_amqp(username, vhost, amqp_rid,
admin=admin)
key = '_'.join([amqp_rid, 'password'])
relation_settings[key] = password
ssl_utils.configure_client_ssl(relation_settings)
if is_clustered():
relation_settings['clustered'] = 'true'
# NOTE(dosaboy): this stanza can be removed once we fully remove
# deprecated HA support.
if is_relation_made('ha'):
# active/passive settings
relation_settings['vip'] = config('vip')
# or ha-vip-only to support active/active, but
# accessed via a VIP for older clients.
if config('ha-vip-only') is True:
relation_settings['ha-vip-only'] = 'true'
# set if need HA queues or not
if cmp_pkgrevno('rabbitmq-server', '3.0.1') < 0:
relation_settings['ha_queues'] = True
log("Updating relation {} keys {}"
.format(relation_id or get_relation_id(),
','.join(relation_settings.keys())), DEBUG)
peer_store_and_set(relation_id=relation_id,
relation_settings=relation_settings)
elif not is_leader() and rabbit.client_node_is_ready():
log("Propagating peer settings to all amqp relations", DEBUG)
# NOTE(jamespage) clear relation to deal with data being
# removed from peer storage.
relation_clear(relation_id)
# Each unit needs to set the db information otherwise if the unit
# with the info dies the settings die with it Bug# 1355848
for rel_id in relation_ids('amqp'):
peerdb_settings = peer_retrieve_by_prefix(rel_id)
if 'password' in peerdb_settings:
peerdb_settings['hostname'] = host_addr
peerdb_settings['private-address'] = host_addr
relation_set(relation_id=rel_id, **peerdb_settings)
def amqp_changed(relation_id=None,
remote_unit=None,
check_deferred_restarts=True):
"""Update amqp relations.
:param relation_id: Relation id to update
:type relation_id: str
:param remote_unit: Remote unit on relation_id to update
:type remote_unit: str
:param check_deferred_events: Whether to check if restarts are
permitted before running hook.
:type check_deferred_events: bool
"""
allowed, reason = is_hook_allowed(
'amqp-relation-changed',
check_deferred_restarts=check_deferred_restarts)
if not allowed:
log(reason, "WARN")
return
singleset = set(['username', 'vhost'])
host_addr = ch_ip.get_relation_ip(
rabbit_net_utils.AMQP_INTERFACE,
cidr_network=config(rabbit_net_utils.AMQP_OVERRIDE_CONFIG))
sent_update = False
if rabbit.leader_node_is_ready():
relation_settings = {
'hostname': host_addr,
'private-address': host_addr
}
# NOTE: active/active case
if config('prefer-ipv6'):
relation_settings['private-address'] = host_addr
current = relation_get(rid=relation_id, unit=remote_unit)
if singleset.issubset(current):
if not all([current.get('username'), current.get('vhost')]):
log('Relation not ready.', DEBUG)
return
# Provide credentials to relations. If password is already
# available on peer relation then use it instead of reconfiguring.
username = current['username']
vhost = current['vhost']
admin = current.get('admin', False)
ttlname = current.get('ttlname')
ttlreg = current.get('ttlreg')
ttl = current.get('ttl')
amqp_rid = relation_id or get_relation_id()
password = configure_amqp(username,
vhost,
amqp_rid,
admin=admin,
ttlname=ttlname,
ttlreg=ttlreg,
ttl=ttl)
relation_settings['password'] = password
else:
# NOTE(hopem): we should look at removing this code since i don't
# think it's ever used anymore and stems from the days
# when we needed to ensure consistency between
# peerstorage (replaced by leader get/set) and amqp
# relations.
queues = {}
for k, v in current.items():
amqp_rid = k.split('_')[0]
x = '_'.join(k.split('_')[1:])
if amqp_rid not in queues:
queues[amqp_rid] = {}
queues[amqp_rid][x] = v
for amqp_rid in queues:
if singleset.issubset(queues[amqp_rid]):
username = queues[amqp_rid]['username']
vhost = queues[amqp_rid]['vhost']
ttlname = queues[amqp_rid].get('ttlname')
ttlreg = queues[amqp_rid].get('ttlreg')
ttl = queues[amqp_rid].get('ttl')
password = configure_amqp(username,
vhost,
amqp_rid,
admin=admin,
ttlname=ttlname,
ttlreg=ttlreg,
ttl=ttl)
key = '_'.join([amqp_rid, 'password'])
relation_settings[key] = password
ssl_utils.configure_client_ssl(relation_settings)
if is_clustered():
relation_settings['clustered'] = 'true'
# NOTE(dosaboy): this stanza can be removed once we fully remove
# deprecated HA support.
if is_relation_made('ha'):
# active/passive settings
relation_settings['vip'] = config('vip')
# or ha-vip-only to support active/active, but
# accessed via a VIP for older clients.
if config('ha-vip-only') is True:
relation_settings['ha-vip-only'] = 'true'
# set if need HA queues or not
if cmp_pkgrevno('rabbitmq-server', '3.0.1') < 0:
relation_settings['ha_queues'] = True
log(
"Updating relation {} keys {}".format(
relation_id or get_relation_id(),
','.join(relation_settings.keys())), DEBUG)
peer_store_and_set(relation_id=relation_id,
relation_settings=relation_settings)
sent_update = True
elif not is_leader() and rabbit.client_node_is_ready():
if not rabbit.clustered():
log("This node is not clustered yet, defer sending data to client",
level=DEBUG)
return
log("Propagating peer settings to all amqp relations", DEBUG)
# NOTE(jamespage) clear relation to deal with data being
# removed from peer storage.
relation_clear(relation_id)
# Each unit needs to set the db information otherwise if the unit
# with the info dies the settings die with it Bug# 1355848
for rel_id in relation_ids('amqp'):
peerdb_settings = peer_retrieve_by_prefix(rel_id)
if 'password' in peerdb_settings:
peerdb_settings['hostname'] = host_addr
peerdb_settings['private-address'] = host_addr
relation_set(relation_id=rel_id, **peerdb_settings)
sent_update = True
kvstore = kv()
update_done = kvstore.get(INITIAL_CLIENT_UPDATE_KEY, False)
if sent_update and not update_done:
kvstore.set(key=INITIAL_CLIENT_UPDATE_KEY, value=True)
kvstore.flush()
def amqp_changed(relation_id=None, remote_unit=None):
singleset = set(['username', 'vhost'])
host_addr = ch_ip.get_relation_ip(
rabbit_net_utils.AMQP_INTERFACE,
cidr_network=config(rabbit_net_utils.AMQP_OVERRIDE_CONFIG))
if rabbit.leader_node_is_ready():
relation_settings = {'hostname': host_addr,
'private-address': host_addr}
# NOTE: active/active case
if config('prefer-ipv6'):
relation_settings['private-address'] = host_addr
current = relation_get(rid=relation_id, unit=remote_unit)
if singleset.issubset(current):
if not all([current.get('username'), current.get('vhost')]):
log('Relation not ready.', DEBUG)
return
# Provide credentials to relations. If password is already
# available on peer relation then use it instead of reconfiguring.
username = current['username']
vhost = current['vhost']
admin = current.get('admin', False)
amqp_rid = relation_id or get_relation_id()
password = configure_amqp(username, vhost, amqp_rid, admin=admin)
relation_settings['password'] = password
else:
# NOTE(hopem): we should look at removing this code since i don't
# think it's ever used anymore and stems from the days
# when we needed to ensure consistency between
# peerstorage (replaced by leader get/set) and amqp
# relations.
queues = {}
for k, v in current.items():
amqp_rid = k.split('_')[0]
x = '_'.join(k.split('_')[1:])
if amqp_rid not in queues:
queues[amqp_rid] = {}
queues[amqp_rid][x] = v
for amqp_rid in queues:
if singleset.issubset(queues[amqp_rid]):
username = queues[amqp_rid]['username']
vhost = queues[amqp_rid]['vhost']
password = configure_amqp(username, vhost, amqp_rid,
admin=admin)
key = '_'.join([amqp_rid, 'password'])
relation_settings[key] = password
ssl_utils.configure_client_ssl(relation_settings)
if is_clustered():
relation_settings['clustered'] = 'true'
# NOTE(dosaboy): this stanza can be removed once we fully remove
# deprecated HA support.
if is_relation_made('ha'):
# active/passive settings
relation_settings['vip'] = config('vip')
# or ha-vip-only to support active/active, but
# accessed via a VIP for older clients.
if config('ha-vip-only') is True:
relation_settings['ha-vip-only'] = 'true'
# set if need HA queues or not
if cmp_pkgrevno('rabbitmq-server', '3.0.1') < 0:
relation_settings['ha_queues'] = True
log("Updating relation {} keys {}"
.format(relation_id or get_relation_id(),
','.join(relation_settings.keys())), DEBUG)
peer_store_and_set(relation_id=relation_id,
relation_settings=relation_settings)
elif not is_leader() and rabbit.client_node_is_ready():
log("Propagating peer settings to all amqp relations", DEBUG)
# NOTE(jamespage) clear relation to deal with data being
# removed from peer storage.
relation_clear(relation_id)
# Each unit needs to set the db information otherwise if the unit
# with the info dies the settings die with it Bug# 1355848
for rel_id in relation_ids('amqp'):
peerdb_settings = peer_retrieve_by_prefix(rel_id)
if 'password' in peerdb_settings:
peerdb_settings['hostname'] = host_addr
peerdb_settings['private-address'] = host_addr
relation_set(relation_id=rel_id, **peerdb_settings)