def loadExtraModules(self):
self.aesKeyScheduleDialog = AesKeyScheduleDialog(self)
self.desKeyScheduleDialog = DesKeyScheduleDialog(self)
self.attackScriptGen = AttackScriptGen(self)
self.traceExplorerDialog = TraceExplorerDialog(self)
self.traceExplorerDialog.scriptsUpdated.connect(self.attackScriptGen.reloadScripts)
self.traceExplorerDialog.runScriptFunction.connect(self.attackScriptGen.runScriptFunction)
self.attackScriptGen.utilList = [self.traceExplorerDialog]
class ChipWhispererAnalyzer(MainChip):
""" Main ChipWhisperer Analyzer GUI Window Class.
You can run this class from another Python script if you wish to, which gives you the ability
to drive the system from another Python script, and not be forced to do everything through
the GUI. Unfortunutly the GUI window still needs to open, as much of the program flow is
done through PySide signals/slots.
"""
MaxRecentFiles = 4
def __init__(self):
super(ChipWhispererAnalyzer, self).__init__(name="ChipWhisperer" + u"\u2122" + " Analyzer V2", icon="cwiconA")
self.console = self.addConsole()
self.results = ResultsPlotting()
#self.resultsDialog = ResultsDialog(self)
#self.addShowStats()
self.addWaveforms()
numPreprocessingStep = 4
self.preprocessingListGUI = [None] * numPreprocessingStep
self.utilList = []
self.traceExplorerDialog = TraceExplorerDialog(self)
self.traceExplorerDialog.scriptsUpdated.connect(self.reloadScripts)
self.traceExplorerDialog.runScriptFunction.connect(self.runFunc)
self.utilList.append(self.traceExplorerDialog)
self.keyScheduleDialog = KeyScheduleDialog(self)
self.scriptList = []
self.scriptList.append({'widget':MainScriptEditor(self)})
self.scriptList[0]['filename'] = self.scriptList[0]['widget'].filename
self.scriptList[0]['dockname'] = 'Auto-Generated'
self.defaultEditor = self.scriptList[0]
autogen = (self.scriptList[0]['dockname'], self.scriptList[0]['filename'])
self.cwParams = [
{'name':'Attack Script', 'type':'group', 'children':[
{'name':'Filename', 'key':'attackfilelist', 'type':'filelist', 'values':{autogen:0}, 'value':0, 'editor':self.editorControl,},# , 'values':self.attackscripts, 'value':None
]},
{'name':'Traces', 'type':'group', 'children':[
{'name':'Points', 'type':'int', 'value':0, 'readonly':True},
{'name':'Traces', 'type':'int', 'value':0, 'readonly':True}
]},
{'name':'Pre-Processing', 'type':'group', 'children':
[{'name':'Module #%d' % step, 'type':'list', 'value':0, 'values':Preprocessing.listAll(self), 'set':partial(self.setPreprocessing, step)} for step in range(0, numPreprocessingStep)]},
{'name':'Attack', 'type':'group', 'children':[
{'name':'Module', 'type':'list', 'values':{'CPA':CPA(self, console=self.console, showScriptParameter=self.showScriptParameter),
'Profiling':Profiling(self, console=self.console, showScriptParameter=self.showScriptParameter)
}, 'value':'CPA', 'set':self.setAttack},
]},
{'name':'Post-Processing', 'type':'group'},
{'name':'Result Collection', 'type':'group', 'children':[
{'name':'Input Trace Plot', 'type':'group', 'children':[
{'name':'Enabled', 'type':'bool', 'value':True},
{'name':'Redraw after Each (slower)', 'type':'bool', 'value':True, 'set':self.setPlotInputEach},
{'name':'Trace Range', 'key':'tracerng', 'type':'range', 'limits':(0, 0)},
{'name':'Point Range', 'key':'pointrng', 'type':'rangegraph', 'limits':(0, 0), 'graphwidget':self.waveformDock.widget()},
{'name':'Redraw', 'type':'action', 'action':self.plotInputTrace},
]}
]},
]
self.plotInputEach = False
self.da = None
self.numTraces = 100
self.traceLimits = 0
self.pointLimits = 0
self.addToolbars()
self.addSettingsDocks()
for d in self.results.dockList():
self.addDockWidget(Qt.RightDockWidgetArea, d)
self.addWindowMenuAction(d.toggleViewAction(), "Results")
self.enforceMenuOrder()
self.editorDocks()
self.restoreDockGeometry()
#Generate correct tab order now that we've restored
self.tabifyDockWidget(self.settingsNormalDock, self.settingsPreprocessingDock)
self.tabifyDockWidget(self.settingsNormalDock, self.settingsAttackDock)
self.tabifyDockWidget(self.settingsNormalDock, self.settingsPostProcessingDock)
self.tabifyDockWidget(self.settingsNormalDock, self.settingsResultsDock)
for d in self.results.dockList():
self.tabifyDockWidget(self.waveformDock, d)
self.newProject()
self.newFile.connect(self.newProject)
self.saveFile.connect(self.saveProject)
self.openFile.connect(self.openProject)
self.manageTraces.tracesChanged.connect(self.tracesChanged)
cpaTemp = CPA(self, console=self.console, showScriptParameter=self.showScriptParameter)
self.setAttack(cpaTemp)
self.setupPreprocessorChain()
# print self.findParam('attackfilelist').items
def listModules(self):
"""Overload this to test imports"""
return ListAllModules()
def editorDocks(self):
"""Ensure we have a script editor window for each referenced analyzer script file"""
for script in self.scriptList:
dockname = "Analysis Script: %s" % script['dockname']
# No previous dock, do setup
if 'dock' not in script.keys():
script['widget'].editWindow.runFunction.connect(partial(self.runScriptFunction, filename=script['filename']))
script['dock'] = self.addDock(script['widget'], name=dockname, area=Qt.RightDockWidgetArea)
# Dock present, check if name changed
if script['dock'].windowTitle() != dockname:
script['dock'].setWindowTitle(dockname)
def editorControl(self, filename, filedesc, default=False, bringToFront=True):
"""This is the call-back from the script editor file list, which opens editors"""
# Find filename
thisEditor = None
for e in self.scriptList:
if e['filename'] == filename:
thisEditor = e
break
if thisEditor is None:
thisEditor = {'widget':MainScriptEditor(parent=self, filename=filename)}
thisEditor['filename'] = filename
thisEditor['dockname'] = filedesc
self.scriptList.append(thisEditor)
# Update all docks if required
thisEditor['dockname'] = filedesc
self.editorDocks()
if bringToFront:
thisEditor['dock'].show()
thisEditor['dock'].raise_()
if default:
# Set as default for attacks etc
self.defaultEditor = thisEditor
def setPlotInputEach(self, enabled):
self.plotInputEach = enabled
def addToolbars(self):
"""Add toolbars and menus to the main window"""
attack = QAction(QIcon(':/images/attack.png'), 'Start Attack', self)
attack.triggered.connect(self.doAttack)
self.AttackToolbar = self.addToolBar('Attack Tools')
self.AttackToolbar.setObjectName('Attack Tools')
self.AttackToolbar.addAction(attack)
# Add utilities
self.UtilitiesTraceExplorer = QAction('Trace Explorer', self,
statusTip='Get information on traces',
triggered=self.traceExplorerDialog.show)
self.UtilitiesAESSchedule = QAction('AES Key Schedule', self,
statusTip='Show AES Key Schedule calculator',
triggered=self.keyScheduleDialog.show)
# self.UtilitiesPartition = QAction('Generate Partitions', self,
# statusTip='Generate Partitions for Template Attacks',
# triggered=self.PartitionDialog.exec_)
self.toolMenu.addSeparator()
self.toolMenu.addAction(self.UtilitiesTraceExplorer)
self.toolMenu.addAction(self.UtilitiesAESSchedule)
# self.toolMenu.addAction(self.UtilitiesPartition)
self.toolMenu.addSeparator()
def setPreprocessing(self, num, module):
"""Insert the preprocessing module selected from the GUI into the list of active modules.
This ensures that the options for that module are then displayed in the GUI, along with
writing the auto-generated script.
"""
self.preprocessingListGUI[num] = module
if module:
module.paramListUpdated.connect(self.reloadParamListPreprocessing)
module.scriptsUpdated.connect(self.reloadScripts)
self.reloadParamListPreprocessing()
self.reloadScripts()
def runFunc(self, name):
# TODO: We should be doing this correctly, this hack is bad ;_;
# name = "TraceExplorerDialog_PartitionDisplay_" + name
self.runScriptFunction(name)
def reloadScripts(self):
"""Rewrite the auto-generated analyzer script, using settings from the GUI"""
# Auto-Generated is always first
mse = self.scriptList[0]['widget']
mse.saveSliderPosition()
mse.editWindow.clear()
mse.append("# Date Auto-Generated: %s" % datetime.now().strftime('%Y.%m.%d-%H.%M.%S'), 0)
mse.append("from chipwhisperer.common.autoscript import AutoScriptBase", 0)
# Get imports from preprocessing
mse.append("#Imports from Preprocessing", 0)
mse.append("import chipwhisperer.analyzer.preprocessing as preprocessing", 0)
for p in self.preprocessingListGUI:
if p:
imports = p.getImportStatements()
for i in imports: mse.append(i, 0)
# Get imports from capture
mse.append("#Imports from Capture", 0)
for i in self.attack.getImportStatements():
mse.append(i, 0)
# Some other imports
mse.append("#Imports from utilList", 0)
for index, util in enumerate(self.utilList):
if hasattr(util, '_smartstatements') and util.isVisible():
for i in util.getImportStatements(): mse.append(i, 0)
mse.append("", 0)
# Add main class
mse.append("class userScript(AutoScriptBase):", 0)
mse.append("preProcessingList = []", 1)
mse.append("def initProject(self):", 1)
mse.append("pass")
mse.append("def initPreprocessing(self):", 1)
# Get init from preprocessing
instNames = ""
for i, p in enumerate(self.preprocessingListGUI):
if p:
classname = type(p).__name__
instname = "self.preProcessing%s%d" % (classname, i)
mse.append("%s = preprocessing.%s.%s(self.parent)" % (instname, classname, classname))
for s in p.getStatements('init'):
mse.append(s.replace("self.", instname + ".").replace("userScript.", "self."))
instNames += instname + ","
mse.append("self.preProcessingList = [%s]" % instNames)
mse.append("return self.preProcessingList")
mse.append("def initAnalysis(self):", 1)
# Get init from analysis
mse.append('self.attack = %s(self.parent, console=self.console, showScriptParameter=self.showScriptParameter)' % type(self.attack).__name__)
for s in self.attack.getStatements('init'):
mse.append(s.replace("self.", "self.attack.").replace("userScript.", "self."))
mse.append('return self.attack')
# Get init from reporting
# Get go command from analysis
mse.append("def initReporting(self, results):", 1)
# mse.append("results.clear()")
mse.append("results.setAttack(self.attack)")
mse.append("results.setTraceManager(self.traceManager())")
mse.append("self.results = results")
mse.append("def doAnalysis(self):", 1)
mse.append("self.attack.doAttack()")
# Get other commands from attack module
for k in self.attack._smartstatements:
if k == 'init' or k == 'go' or k == 'done':
pass
else:
mse.append("def %s(self):" % k, 1)
for s in self.attack.getStatements(k):
mse.append(s.replace("self.", "self.attack.").replace("userScript.", "self."))
# Get other commands from other utilities
for index, util in enumerate(self.utilList):
if hasattr(util, '_smartstatements') and util.isVisible():
for k in util._smartstatements:
util._smartstatements[k].addSelfReplacement("utilList[%d]." % index)
util._smartstatements[k].addSelfReplacement("parent.")
statements = util.getStatements(k)
if len(statements) > 0:
mse.append("def %s_%s(self):" % (util.__class__.__name__, k), 1)
for s in statements:
mse.append(s.replace("userScript.", "self."))
mse.restoreSliderPosition()
def reloadParamListPreprocessing(self, list=None):
"""Reload the parameter lists, ensuring GUI is showing correct options to user"""
plist = []
for p in self.preprocessingListGUI:
if p:
for item in p.paramList():
plist.append(item)
ExtendedParameter.reloadParams(plist, self.preprocessingParamTree)
def setAttack(self, attack):
"""Set the attack module, reloading GUI and connecting appropriate signals"""
self.attack = attack
self.reloadAttackParamList()
self.results.setAttack(self.attack)
self.attack.paramListUpdated.connect(self.reloadAttackParamList)
self.attack.setTraceLimits(self.traceLimits, self.pointLimits)
# Sometimes required
if hasattr(self, "traces") and self.traces:
self.attack.setTraceManager(self.traces)
self.attack.setProject(self.project())
self.attack.scriptsUpdated.connect(self.reloadScripts)
self.attack.runScriptFunction.connect(self.runScriptFunction)
self.reloadScripts()
def setupScriptModule(self, filename=None):
"""Loads a given script as a module for dynamic run-time insertion.
Args:
filename (str): The full filename to open. If None it opens the
auto-generated script instead.
"""
if filename and filename != self.defaultEditor['filename']:
QMessageBox.warning(None, "Script Error", "Cannot run script from non-default function")
return None
mod = self.defaultEditor['widget'].loadModule()
# Check if we aborted due to conflitcing edit
if mod is None:
return None
script = mod.userScript(self, self.console, self.showScriptParameter)
if hasattr(self, "traces") and self.traces:
script.setTraceManager(self.traces)
return script
def runScriptFunction(self, funcname, filename=None):
"""Loads a given script and runs a specific function within it."""
mod = self.setupScriptModule(filename)
if mod:
try:
eval('mod.%s()' % funcname)
except AttributeError as e:
# TODO fix this hack - this function will not exist before the
# traceexplorer dialog has been opended, but will still be
# called once
if funcname == 'TraceExplorerDialog_PartitionDisplay_findPOI':
pass
else:
# Continue with exception
raise
def doAttack(self):
"""Called when the 'Do Attack' button is pressed, or can be called via API
to cause attack to run"""
#Check if traces enabled
if self.traces.NumTrace == 0:
msgBox = QMessageBox(QMessageBox.Warning, "Trace Error", "No traces enabled in project - open Trace Manager?",
QMessageBox.NoButton, self)
msgBox.addButton("Yes", QMessageBox.AcceptRole)
msgBox.addButton("No", QMessageBox.RejectRole)
if msgBox.exec_() == QMessageBox.AcceptRole:
self.manageTraces.show()
return
self.console.append("Loading...")
mod = self.setupScriptModule()
# mod.initProject()
# Setup trace sources etc, this calls the
# .initPreprocessing itself
# it also resets the setTraces in the passed 'mod',
# which is REQUIRED for proper functioning!
self.setupPreprocessorChain(mod)
mod.initAnalysis()
mod.initReporting(self.results)
mod.doAnalysis()
mod.doneAnalysis()
mod.doneReporting()
# self.console.append("Attack Started")
# if self.results:
# self.results.setTraceManager(self.traces)
#
# if self.attack:
# self.attack.setTraceManager(self.traces)
# self.attack.doAttack()
# self.console.append("Attack Done")
def reloadAttackParamList(self, list=None):
"""Reloads parameter tree in GUI when attack changes"""
ExtendedParameter.reloadParams(self.attack.paramList(), self.attackParamTree)
def tracesChanged(self):
"""Traces changed due to loading new project or adjustment in trace manager,
so adjust limits displayed and re-plot the new input trace"""
self.setTraceLimits(self.manageTraces.iface.NumTrace, self.manageTraces.iface.NumPoint)
self.plotInputTrace()
def setupPreprocessorChain(self, mod=None):
"""Setup the preprocessor chain by chaining the first module input to the source
traces, the next module input to the previous module output, etc."""
if mod is None:
mod = self.setupScriptModule()
self.preprocessingList = mod.initPreprocessing()
self.lastoutput = self.manageTraces.iface
for t in self.preprocessingList:
if t:
t.setTraceSource(self.lastoutput)
t.init()
self.lastoutput = t
self.traces = self.lastoutput
for item in self.utilList:
item.setTraceSource(self.traces)
mod.setTraceManager(self.traces)
# self.reloadScripts()
def plotInputTrace(self):
"""Plot the input trace(s) as given by the GUI settings."""
#print "Plotting %d-%d for points %d-%d"%(params[0].value(), params[1].value(), params[2].value(), params[3].value())
self.waveformDock.widget().clearPushed()
self.setupPreprocessorChain()
tstart = self.findParam('tracerng').value()[0]
tend = self.findParam('tracerng').value()[1]
pstart = self.findParam('pointrng').value()[0]
pend = self.findParam('pointrng').value()[1]
ttotal = 0
if tend - tstart > 1:
self.waveformDock.widget().setPersistance(True)
for tnum in range(tstart, tend):
trace = self.traces.getTrace(tnum)
if trace is None:
continue
ttotal += 1
self.waveformDock.widget().passTrace(trace[pstart:pend], pstart)
if self.plotInputEach:
QCoreApplication.processEvents()
# print ttotal
def setTraceLimits(self, traces=None, points=None, deftrace=1, defpoint=-1):
"""When traces is loaded, Tell everything default point/trace range"""
if defpoint == -1:
defpoint = points
#Set parameters for attack
self.traceLimits = traces
self.pointLimits = points
self.attack.setTraceLimits(traces, points)
# Set local parameters for trace viewer
if traces is not None:
self.findParam('tracerng').setLimits((0, traces))
# TODO: Bug in pyqtgraph maybe - if call with just deftrace &
#setLimits was called with (0,0), the setValue(1) is ignored which is OK,
#but then calling setLimits with higher value followed by setValue still
#has no effect??
#WORKAROUND: use min(traces,deftrace) to ensure don't set value beyond limit for now
self.findParam('tracerng').setValue((0, min(traces, deftrace)))
if points:
self.findParam('pointrng').setLimits((0, points))
self.findParam('pointrng').setValue((0, defpoint))
def addWaveforms(self):
"""Add waveform display dock to main window"""
self.waveformDock = self.addTraceDock("Waveform Display") #TODO: FIX THIS HACK
#Should be something in ScopeInterface class maybe
self.waveformDock.widget().setDefaultYRange(-0.5, 0.5)
self.waveformDock.widget().YDefault()
#def addShowStats(self):
# self.statsShowAct = QAction('&Results Monitor', self, statusTip='Plot/Save PGE etc', triggered=self.resultsDialog.show)
# self.projectMenu.addAction(self.statsShowAct)
def addSettingsDocks(self):
"""Add settings dock to main window"""
self.setupParametersTree()
self.settingsNormalDock = self.addSettings(self.paramTree, "General")
self.settingsPreprocessingDock = self.addSettings(self.preprocessingParamTree, "Preprocessing")
self.settingsAttackDock = self.addSettings(self.attackParamTree, "Attack")
self.settingsPostProcessingDock = self.addSettings(self.postprocessingParamTree, "Postprocessing")
self.settingsResultsDock = self.addSettings(self.resultsParamTree, "Results")
def setupParametersTree(self):
"""Setup all parameter trees so they can be reloaded later with changes"""
self.params = Parameter.create(name='Generic Settings', type='group', children=self.cwParams)
ExtendedParameter.setupExtended(self.params, self)
self.paramTree = ParameterTree()
self.paramTree.setParameters(self.params, showTop=False)
self.preprocessingParamTree = ParameterTree()
self.attackParamTree = ParameterTree()
self.postprocessingParamTree = ParameterTree()
self.resultsParamTree = ParameterTree()
self.results.paramListUpdated.connect(self.reloadParamListResults)
self.reloadParamListResults()
def reloadParamListResults(self, lst=None):
"""Reload parameter tree for results settings, ensuring GUI matches loaded modules."""
ExtendedParameter.reloadParams(self.results.paramList(), self.resultsParamTree)
def reloadParamList(self, lst=None):
"""Reload parameter trees in a given list, ensuring GUI matches loaded modules."""
ExtendedParameter.reloadParams(self.paramList(), self.paramTree)
def paramList(self):
p = []
p.append(self.params)
return p
def openProject(self, fname):
"""Open a ChipWhisperer project file"""
self.setProject(ProjectFormat(self))
self.project().setProgramName("ChipWhisperer-Analyzer")
self.project().setProgramVersion("2.00")
self.project().setTraceManager(self.manageTraces)
self.setCurrentFile(fname)
self.project().setFilename(fname)
self.project().load()
#Open project file & read in everything
self.project().traceManager.loadProject(fname)
# Ensure attack knows about this project
self.attack.setProject(self.project())
self.traceExplorerDialog.setProject(self.project())
def newProject(self):
"""Create a new ChipWhisperer project file"""
#TODO: Move this to MainChip
self.setProject(ProjectFormat(self))
self.project().setProgramName("ChipWhisperer-Analyzer")
self.project().setProgramVersion("2.00")
self.project().addParamTree(self)
self.project().setTraceManager(self.manageTraces)
self.setCurrentFile(None)
self.projectChanged.connect(self.traceExplorerDialog.setProject)
def saveProject(self):
"""Save a ChipWhisperer project file"""
#TODO: Move to MainChip
if self.project().hasFilename() == False:
fd = QFileDialog(self, 'Save New File', '.', '*.cwp')
fd.setDefaultSuffix('cwp')
fd.setAcceptMode(QFileDialog.AcceptSave)
fd.setViewMode(QFileDialog.Detail)
if fd.exec_() == QDialog.Accepted:
fname = fd.selectedFiles()[0]
else:
return
self.project().setFilename(fname)
self.setCurrentFile(fname)
self.project().save()
self.dirty = False
self.updateTitleBar()
self.statusBar().showMessage("Project Saved")
def __init__(self):
super(ChipWhispererAnalyzer, self).__init__(name="ChipWhisperer" + u"\u2122" + " Analyzer V2", icon="cwiconA")
self.console = self.addConsole()
self.results = ResultsPlotting()
#self.resultsDialog = ResultsDialog(self)
#self.addShowStats()
self.addWaveforms()
numPreprocessingStep = 4
self.preprocessingListGUI = [None] * numPreprocessingStep
self.utilList = []
self.traceExplorerDialog = TraceExplorerDialog(self)
self.traceExplorerDialog.scriptsUpdated.connect(self.reloadScripts)
self.traceExplorerDialog.runScriptFunction.connect(self.runFunc)
self.utilList.append(self.traceExplorerDialog)
self.keyScheduleDialog = KeyScheduleDialog(self)
self.scriptList = []
self.scriptList.append({'widget':MainScriptEditor(self)})
self.scriptList[0]['filename'] = self.scriptList[0]['widget'].filename
self.scriptList[0]['dockname'] = 'Auto-Generated'
self.defaultEditor = self.scriptList[0]
autogen = (self.scriptList[0]['dockname'], self.scriptList[0]['filename'])
self.cwParams = [
{'name':'Attack Script', 'type':'group', 'children':[
{'name':'Filename', 'key':'attackfilelist', 'type':'filelist', 'values':{autogen:0}, 'value':0, 'editor':self.editorControl,},# , 'values':self.attackscripts, 'value':None
]},
{'name':'Traces', 'type':'group', 'children':[
{'name':'Points', 'type':'int', 'value':0, 'readonly':True},
{'name':'Traces', 'type':'int', 'value':0, 'readonly':True}
]},
{'name':'Pre-Processing', 'type':'group', 'children':
[{'name':'Module #%d' % step, 'type':'list', 'value':0, 'values':Preprocessing.listAll(self), 'set':partial(self.setPreprocessing, step)} for step in range(0, numPreprocessingStep)]},
{'name':'Attack', 'type':'group', 'children':[
{'name':'Module', 'type':'list', 'values':{'CPA':CPA(self, console=self.console, showScriptParameter=self.showScriptParameter),
'Profiling':Profiling(self, console=self.console, showScriptParameter=self.showScriptParameter)
}, 'value':'CPA', 'set':self.setAttack},
]},
{'name':'Post-Processing', 'type':'group'},
{'name':'Result Collection', 'type':'group', 'children':[
{'name':'Input Trace Plot', 'type':'group', 'children':[
{'name':'Enabled', 'type':'bool', 'value':True},
{'name':'Redraw after Each (slower)', 'type':'bool', 'value':True, 'set':self.setPlotInputEach},
{'name':'Trace Range', 'key':'tracerng', 'type':'range', 'limits':(0, 0)},
{'name':'Point Range', 'key':'pointrng', 'type':'rangegraph', 'limits':(0, 0), 'graphwidget':self.waveformDock.widget()},
{'name':'Redraw', 'type':'action', 'action':self.plotInputTrace},
]}
]},
]
self.plotInputEach = False
self.da = None
self.numTraces = 100
self.traceLimits = 0
self.pointLimits = 0
self.addToolbars()
self.addSettingsDocks()
for d in self.results.dockList():
self.addDockWidget(Qt.RightDockWidgetArea, d)
self.addWindowMenuAction(d.toggleViewAction(), "Results")
self.enforceMenuOrder()
self.editorDocks()
self.restoreDockGeometry()
#Generate correct tab order now that we've restored
self.tabifyDockWidget(self.settingsNormalDock, self.settingsPreprocessingDock)
self.tabifyDockWidget(self.settingsNormalDock, self.settingsAttackDock)
self.tabifyDockWidget(self.settingsNormalDock, self.settingsPostProcessingDock)
self.tabifyDockWidget(self.settingsNormalDock, self.settingsResultsDock)
for d in self.results.dockList():
self.tabifyDockWidget(self.waveformDock, d)
self.newProject()
self.newFile.connect(self.newProject)
self.saveFile.connect(self.saveProject)
self.openFile.connect(self.openProject)
self.manageTraces.tracesChanged.connect(self.tracesChanged)
cpaTemp = CPA(self, console=self.console, showScriptParameter=self.showScriptParameter)
self.setAttack(cpaTemp)
self.setupPreprocessorChain()
def loadExtraModules(self):
self.aesKeyScheduleDialog = AesKeyScheduleDialog(self)
self.desKeyScheduleDialog = DesKeyScheduleDialog(self)
self.traceExplorerDialog = TraceExplorerDialog(self)
class ChipWhispererAnalyzer(MainChip):
""" Main ChipWhisperer Analyzer GUI Window Class.
You can run this class from another Python script if you wish to, which gives you the ability
to drive the system from another Python script, and not be forced to do everything through
the GUI. Unfortunutly the GUI window still needs to open, as much of the program flow is
done through PySide signals/slots.
"""
MaxRecentFiles = 4
def __init__(self):
super(ChipWhispererAnalyzer,
self).__init__(name="ChipWhisperer" + u"\u2122" + " Analyzer V2",
icon="cwiconA")
self.console = self.addConsole()
self.results = ResultsPlotting()
#self.resultsDialog = ResultsDialog(self)
#self.addShowStats()
self.addWaveforms()
numPreprocessingStep = 4
self.preprocessingListGUI = [None] * numPreprocessingStep
self.utilList = []
self.traceExplorerDialog = TraceExplorerDialog(self)
self.traceExplorerDialog.scriptsUpdated.connect(self.reloadScripts)
self.traceExplorerDialog.runScriptFunction.connect(self.runFunc)
self.utilList.append(self.traceExplorerDialog)
self.keyScheduleDialog = KeyScheduleDialog(self)
self.scriptList = []
self.scriptList.append({'widget': MainScriptEditor(self)})
self.scriptList[0]['filename'] = self.scriptList[0]['widget'].filename
self.scriptList[0]['dockname'] = 'Auto-Generated'
self.defaultEditor = self.scriptList[0]
autogen = (self.scriptList[0]['dockname'],
self.scriptList[0]['filename'])
self.cwParams = [
{
'name':
'Attack Script',
'type':
'group',
'children': [
{
'name': 'Filename',
'key': 'attackfilelist',
'type': 'filelist',
'values': {
autogen: 0
},
'value': 0,
'editor': self.editorControl,
}, # , 'values':self.attackscripts, 'value':None
]
},
{
'name':
'Traces',
'type':
'group',
'children': [{
'name': 'Points',
'type': 'int',
'value': 0,
'readonly': True
}, {
'name': 'Traces',
'type': 'int',
'value': 0,
'readonly': True
}]
},
{
'name':
'Pre-Processing',
'type':
'group',
'children': [{
'name': 'Module #%d' % step,
'type': 'list',
'value': 0,
'values': Preprocessing.listAll(self),
'set': partial(self.setPreprocessing, step)
} for step in range(0, numPreprocessingStep)]
},
{
'name':
'Attack',
'type':
'group',
'children': [
{
'name': 'Module',
'type': 'list',
'values': {
'CPA':
CPA(self,
console=self.console,
showScriptParameter=self.showScriptParameter),
'Profiling':
Profiling(
self,
console=self.console,
showScriptParameter=self.showScriptParameter)
},
'value': 'CPA',
'set': self.setAttack
},
]
},
{
'name': 'Post-Processing',
'type': 'group'
},
{
'name':
'Result Collection',
'type':
'group',
'children': [{
'name':
'Input Trace Plot',
'type':
'group',
'children': [
{
'name': 'Enabled',
'type': 'bool',
'value': True
},
{
'name': 'Redraw after Each (slower)',
'type': 'bool',
'value': True,
'set': self.setPlotInputEach
},
{
'name': 'Trace Range',
'key': 'tracerng',
'type': 'range',
'limits': (0, 0)
},
{
'name': 'Point Range',
'key': 'pointrng',
'type': 'rangegraph',
'limits': (0, 0),
'graphwidget': self.waveformDock.widget()
},
{
'name': 'Redraw',
'type': 'action',
'action': self.plotInputTrace
},
]
}]
},
]
self.plotInputEach = False
self.da = None
self.numTraces = 100
self.traceLimits = 0
self.pointLimits = 0
self.addToolbars()
self.addSettingsDocks()
for d in self.results.dockList():
self.addDockWidget(Qt.RightDockWidgetArea, d)
self.addWindowMenuAction(d.toggleViewAction(), "Results")
self.enforceMenuOrder()
self.editorDocks()
self.restoreDockGeometry()
#Generate correct tab order now that we've restored
self.tabifyDockWidget(self.settingsNormalDock,
self.settingsPreprocessingDock)
self.tabifyDockWidget(self.settingsNormalDock, self.settingsAttackDock)
self.tabifyDockWidget(self.settingsNormalDock,
self.settingsPostProcessingDock)
self.tabifyDockWidget(self.settingsNormalDock,
self.settingsResultsDock)
for d in self.results.dockList():
self.tabifyDockWidget(self.waveformDock, d)
self.newProject()
self.newFile.connect(self.newProject)
self.saveFile.connect(self.saveProject)
self.openFile.connect(self.openProject)
self.manageTraces.tracesChanged.connect(self.tracesChanged)
cpaTemp = CPA(self,
console=self.console,
showScriptParameter=self.showScriptParameter)
self.setAttack(cpaTemp)
self.setupPreprocessorChain()
# print self.findParam('attackfilelist').items
def listModules(self):
"""Overload this to test imports"""
return ListAllModules()
def editorDocks(self):
"""Ensure we have a script editor window for each referenced analyzer script file"""
for script in self.scriptList:
dockname = "Analysis Script: %s" % script['dockname']
# No previous dock, do setup
if 'dock' not in script.keys():
script['widget'].editWindow.runFunction.connect(
partial(self.runScriptFunction,
filename=script['filename']))
script['dock'] = self.addDock(script['widget'],
name=dockname,
area=Qt.RightDockWidgetArea)
# Dock present, check if name changed
if script['dock'].windowTitle() != dockname:
script['dock'].setWindowTitle(dockname)
def editorControl(self,
filename,
filedesc,
default=False,
bringToFront=True):
"""This is the call-back from the script editor file list, which opens editors"""
# Find filename
thisEditor = None
for e in self.scriptList:
if e['filename'] == filename:
thisEditor = e
break
if thisEditor is None:
thisEditor = {
'widget': MainScriptEditor(parent=self, filename=filename)
}
thisEditor['filename'] = filename
thisEditor['dockname'] = filedesc
self.scriptList.append(thisEditor)
# Update all docks if required
thisEditor['dockname'] = filedesc
self.editorDocks()
if bringToFront:
thisEditor['dock'].show()
thisEditor['dock'].raise_()
if default:
# Set as default for attacks etc
self.defaultEditor = thisEditor
def setPlotInputEach(self, enabled):
self.plotInputEach = enabled
def addToolbars(self):
"""Add toolbars and menus to the main window"""
attack = QAction(QIcon(':/images/attack.png'), 'Start Attack', self)
attack.triggered.connect(self.doAttack)
self.AttackToolbar = self.addToolBar('Attack Tools')
self.AttackToolbar.setObjectName('Attack Toolbar')
self.AttackToolbar.addAction(attack)
self.AttackToolbar.show()
# Add utilities
self.UtilitiesTraceExplorer = QAction(
'Trace Explorer',
self,
statusTip='Get information on traces',
triggered=self.traceExplorerDialog.show)
self.UtilitiesAESSchedule = QAction(
'AES Key Schedule',
self,
statusTip='Show AES Key Schedule calculator',
triggered=self.keyScheduleDialog.show)
# self.UtilitiesPartition = QAction('Generate Partitions', self,
# statusTip='Generate Partitions for Template Attacks',
# triggered=self.PartitionDialog.exec_)
self.toolMenu.addSeparator()
self.toolMenu.addAction(self.UtilitiesTraceExplorer)
self.toolMenu.addAction(self.UtilitiesAESSchedule)
# self.toolMenu.addAction(self.UtilitiesPartition)
self.toolMenu.addSeparator()
def setPreprocessing(self, num, module):
"""Insert the preprocessing module selected from the GUI into the list of active modules.
This ensures that the options for that module are then displayed in the GUI, along with
writing the auto-generated script.
"""
self.preprocessingListGUI[num] = module
if module:
module.paramListUpdated.connect(self.reloadParamListPreprocessing)
module.scriptsUpdated.connect(self.reloadScripts)
self.reloadParamListPreprocessing()
self.reloadScripts()
def runFunc(self, name):
# TODO: We should be doing this correctly, this hack is bad ;_;
# name = "TraceExplorerDialog_PartitionDisplay_" + name
self.runScriptFunction(name)
def reloadScripts(self):
"""Rewrite the auto-generated analyzer script, using settings from the GUI"""
# Auto-Generated is always first
mse = self.scriptList[0]['widget']
mse.saveSliderPosition()
mse.editWindow.clear()
mse.append(
"# Date Auto-Generated: %s" %
datetime.now().strftime('%Y.%m.%d-%H.%M.%S'), 0)
mse.append(
"from chipwhisperer.common.autoscript import AutoScriptBase", 0)
# Get imports from preprocessing
mse.append("#Imports from Preprocessing", 0)
mse.append(
"import chipwhisperer.analyzer.preprocessing as preprocessing", 0)
for p in self.preprocessingListGUI:
if p:
imports = p.getImportStatements()
for i in imports:
mse.append(i, 0)
# Get imports from capture
mse.append("#Imports from Capture", 0)
for i in self.attack.getImportStatements():
mse.append(i, 0)
# Some other imports
mse.append("#Imports from utilList", 0)
for index, util in enumerate(self.utilList):
if hasattr(util, '_smartstatements') and util.isVisible():
for i in util.getImportStatements():
mse.append(i, 0)
mse.append("", 0)
# Add main class
mse.append("class userScript(AutoScriptBase):", 0)
mse.append("preProcessingList = []", 1)
mse.append("def initProject(self):", 1)
mse.append("pass")
mse.append("def initPreprocessing(self):", 1)
# Get init from preprocessing
instNames = ""
for i, p in enumerate(self.preprocessingListGUI):
if p:
classname = type(p).__name__
instname = "self.preProcessing%s%d" % (classname, i)
mse.append("%s = preprocessing.%s.%s(self.parent)" %
(instname, classname, classname))
for s in p.getStatements('init'):
mse.append(
s.replace("self.", instname + ".").replace(
"userScript.", "self."))
instNames += instname + ","
mse.append("self.preProcessingList = [%s]" % instNames)
mse.append("return self.preProcessingList")
mse.append("def initAnalysis(self):", 1)
# Get init from analysis
mse.append(
'self.attack = %s(self.parent, console=self.console, showScriptParameter=self.showScriptParameter)'
% type(self.attack).__name__)
for s in self.attack.getStatements('init'):
mse.append(
s.replace("self.",
"self.attack.").replace("userScript.", "self."))
mse.append('return self.attack')
# Get init from reporting
# Get go command from analysis
mse.append("def initReporting(self, results):", 1)
# mse.append("results.clear()")
mse.append("results.setAttack(self.attack)")
mse.append("results.setTraceManager(self.traceManager())")
mse.append("self.results = results")
mse.append("def doAnalysis(self):", 1)
mse.append("self.attack.doAttack()")
# Get other commands from attack module
for k in self.attack._smartstatements:
if k == 'init' or k == 'go' or k == 'done':
pass
else:
mse.append("def %s(self):" % k, 1)
for s in self.attack.getStatements(k):
mse.append(
s.replace("self.", "self.attack.").replace(
"userScript.", "self."))
# Get other commands from other utilities
for index, util in enumerate(self.utilList):
if hasattr(util, '_smartstatements') and util.isVisible():
for k in util._smartstatements:
util._smartstatements[k].addSelfReplacement(
"utilList[%d]." % index)
util._smartstatements[k].addSelfReplacement("parent.")
statements = util.getStatements(k)
if len(statements) > 0:
mse.append(
"def %s_%s(self):" % (util.__class__.__name__, k),
1)
for s in statements:
mse.append(s.replace("userScript.", "self."))
mse.restoreSliderPosition()
def reloadParamListPreprocessing(self, list=None):
"""Reload the parameter lists, ensuring GUI is showing correct options to user"""
plist = []
for p in self.preprocessingListGUI:
if p:
for item in p.paramList():
plist.append(item)
ExtendedParameter.reloadParams(plist, self.preprocessingParamTree)
def setAttack(self, attack):
"""Set the attack module, reloading GUI and connecting appropriate signals"""
self.attack = attack
self.reloadAttackParamList()
self.results.setAttack(self.attack)
self.attack.paramListUpdated.connect(self.reloadAttackParamList)
self.attack.setTraceLimits(self.traceLimits, self.pointLimits)
# Sometimes required
if hasattr(self, "traces") and self.traces:
self.attack.setTraceManager(self.traces)
self.attack.setProject(self.project())
self.attack.scriptsUpdated.connect(self.reloadScripts)
self.attack.runScriptFunction.connect(self.runScriptFunction)
self.reloadScripts()
def setupScriptModule(self, filename=None):
"""Loads a given script as a module for dynamic run-time insertion.
Args:
filename (str): The full filename to open. If None it opens the
auto-generated script instead.
"""
if filename and filename != self.defaultEditor['filename']:
QMessageBox.warning(None, "Script Error",
"Cannot run script from non-default function")
return None
mod = self.defaultEditor['widget'].loadModule()
# Check if we aborted due to conflitcing edit
if mod is None:
return None
script = mod.userScript(self, self.console, self.showScriptParameter)
if hasattr(self, "traces") and self.traces:
script.setTraceManager(self.traces)
return script
def runScriptFunction(self, funcname, filename=None):
"""Loads a given script and runs a specific function within it."""
mod = self.setupScriptModule(filename)
if mod:
try:
eval('mod.%s()' % funcname)
except AttributeError as e:
# TODO fix this hack - this function will not exist before the
# traceexplorer dialog has been opended, but will still be
# called once
if funcname == 'TraceExplorerDialog_PartitionDisplay_findPOI':
pass
else:
# Continue with exception
raise
def doAttack(self):
"""Called when the 'Do Attack' button is pressed, or can be called via API
to cause attack to run"""
#Check if traces enabled
if self.traces.NumTrace == 0:
msgBox = QMessageBox(
QMessageBox.Warning, "Trace Error",
"No traces enabled in project - open Trace Manager?",
QMessageBox.NoButton, self)
msgBox.addButton("Yes", QMessageBox.AcceptRole)
msgBox.addButton("No", QMessageBox.RejectRole)
if msgBox.exec_() == QMessageBox.AcceptRole:
self.manageTraces.show()
return
self.console.append("Loading...")
mod = self.setupScriptModule()
# mod.initProject()
# Setup trace sources etc, this calls the
# .initPreprocessing itself
# it also resets the setTraces in the passed 'mod',
# which is REQUIRED for proper functioning!
self.setupPreprocessorChain(mod)
mod.initAnalysis()
mod.initReporting(self.results)
mod.doAnalysis()
mod.doneAnalysis()
mod.doneReporting()
# self.console.append("Attack Started")
# if self.results:
# self.results.setTraceManager(self.traces)
#
# if self.attack:
# self.attack.setTraceManager(self.traces)
# self.attack.doAttack()
# self.console.append("Attack Done")
def reloadAttackParamList(self, list=None):
"""Reloads parameter tree in GUI when attack changes"""
ExtendedParameter.reloadParams(self.attack.paramList(),
self.attackParamTree)
def tracesChanged(self):
"""Traces changed due to loading new project or adjustment in trace manager,
so adjust limits displayed and re-plot the new input trace"""
self.setTraceLimits(self.manageTraces.iface.NumTrace,
self.manageTraces.iface.NumPoint)
self.plotInputTrace()
def setupPreprocessorChain(self, mod=None):
"""Setup the preprocessor chain by chaining the first module input to the source
traces, the next module input to the previous module output, etc."""
if mod is None:
mod = self.setupScriptModule()
self.preprocessingList = mod.initPreprocessing()
self.lastoutput = self.manageTraces.iface
for t in self.preprocessingList:
if t:
t.setTraceSource(self.lastoutput)
t.init()
self.lastoutput = t
self.traces = self.lastoutput
for item in self.utilList:
item.setTraceSource(self.traces)
mod.setTraceManager(self.traces)
# self.reloadScripts()
def plotInputTrace(self):
"""Plot the input trace(s) as given by the GUI settings."""
#print "Plotting %d-%d for points %d-%d"%(params[0].value(), params[1].value(), params[2].value(), params[3].value())
self.waveformDock.widget().clearPushed()
self.setupPreprocessorChain()
tstart = self.findParam('tracerng').value()[0]
tend = self.findParam('tracerng').value()[1]
pstart = self.findParam('pointrng').value()[0]
pend = self.findParam('pointrng').value()[1]
ttotal = 0
if tend - tstart > 1:
self.waveformDock.widget().setPersistance(True)
for tnum in range(tstart, tend):
trace = self.traces.getTrace(tnum)
if trace is None:
continue
ttotal += 1
self.waveformDock.widget().passTrace(trace[pstart:pend], pstart)
if self.plotInputEach:
QCoreApplication.processEvents()
# print ttotal
def setTraceLimits(self,
traces=None,
points=None,
deftrace=1,
defpoint=-1):
"""When traces is loaded, Tell everything default point/trace range"""
if defpoint == -1:
defpoint = points
#Set parameters for attack
self.traceLimits = traces
self.pointLimits = points
self.attack.setTraceLimits(traces, points)
# Set local parameters for trace viewer
if traces is not None:
self.findParam('tracerng').setLimits((0, traces))
# TODO: Bug in pyqtgraph maybe - if call with just deftrace &
#setLimits was called with (0,0), the setValue(1) is ignored which is OK,
#but then calling setLimits with higher value followed by setValue still
#has no effect??
#WORKAROUND: use min(traces,deftrace) to ensure don't set value beyond limit for now
self.findParam('tracerng').setValue((0, min(traces, deftrace)))
if points:
self.findParam('pointrng').setLimits((0, points))
self.findParam('pointrng').setValue((0, defpoint))
def addWaveforms(self):
"""Add waveform display dock to main window"""
self.waveformDock = self.addTraceDock(
"Waveform Display") #TODO: FIX THIS HACK
#Should be something in ScopeInterface class maybe
self.waveformDock.widget().setDefaultYRange(-0.5, 0.5)
self.waveformDock.widget().YDefault()
#def addShowStats(self):
# self.statsShowAct = QAction('&Results Monitor', self, statusTip='Plot/Save PGE etc', triggered=self.resultsDialog.show)
# self.projectMenu.addAction(self.statsShowAct)
def addSettingsDocks(self):
"""Add settings dock to main window"""
self.setupParametersTree()
self.settingsNormalDock = self.addSettings(self.paramTree, "General")
self.settingsPreprocessingDock = self.addSettings(
self.preprocessingParamTree, "Preprocessing")
self.settingsAttackDock = self.addSettings(self.attackParamTree,
"Attack")
self.settingsPostProcessingDock = self.addSettings(
self.postprocessingParamTree, "Postprocessing")
self.settingsResultsDock = self.addSettings(self.resultsParamTree,
"Results")
def setupParametersTree(self):
"""Setup all parameter trees so they can be reloaded later with changes"""
self.params = Parameter.create(name='Generic Settings',
type='group',
children=self.cwParams)
ExtendedParameter.setupExtended(self.params, self)
self.paramTree = ParameterTree()
self.paramTree.setParameters(self.params, showTop=False)
self.preprocessingParamTree = ParameterTree()
self.attackParamTree = ParameterTree()
self.postprocessingParamTree = ParameterTree()
self.resultsParamTree = ParameterTree()
self.results.paramListUpdated.connect(self.reloadParamListResults)
self.reloadParamListResults()
def reloadParamListResults(self, lst=None):
"""Reload parameter tree for results settings, ensuring GUI matches loaded modules."""
ExtendedParameter.reloadParams(self.results.paramList(),
self.resultsParamTree)
def reloadParamList(self, lst=None):
"""Reload parameter trees in a given list, ensuring GUI matches loaded modules."""
ExtendedParameter.reloadParams(self.paramList(), self.paramTree)
def paramList(self):
p = []
p.append(self.params)
return p
def openProject(self, fname):
"""Open a ChipWhisperer project file"""
self.setProject(ProjectFormat(self))
self.project().setProgramName("ChipWhisperer-Analyzer")
self.project().setProgramVersion("2.00")
self.project().setTraceManager(self.manageTraces)
self.setCurrentFile(fname)
self.project().setFilename(fname)
self.project().load()
#Open project file & read in everything
self.project().traceManager.loadProject(fname)
# Ensure attack knows about this project
self.attack.setProject(self.project())
self.traceExplorerDialog.setProject(self.project())
def newProject(self):
"""Create a new ChipWhisperer project file"""
#TODO: Move this to MainChip
self.setProject(ProjectFormat(self))
self.project().setProgramName("ChipWhisperer-Analyzer")
self.project().setProgramVersion("2.00")
self.project().addParamTree(self)
self.project().setTraceManager(self.manageTraces)
self.setCurrentFile(None)
self.projectChanged.connect(self.traceExplorerDialog.setProject)
# TODO: Fix this hack
self.macWorkArounds()
def saveProject(self):
"""Save a ChipWhisperer project file"""
#TODO: Move to MainChip
if self.project().hasFilename() == False:
fd = QFileDialog(self, 'Save New File', '.', '*.cwp')
fd.setDefaultSuffix('cwp')
fd.setAcceptMode(QFileDialog.AcceptSave)
fd.setViewMode(QFileDialog.Detail)
if fd.exec_() == QDialog.Accepted:
fname = fd.selectedFiles()[0]
else:
return
self.project().setFilename(fname)
self.setCurrentFile(fname)
self.project().save()
self.dirty = False
self.updateTitleBar()
self.statusBar().showMessage("Project Saved")
def __init__(self):
super(ChipWhispererAnalyzer,
self).__init__(name="ChipWhisperer" + u"\u2122" + " Analyzer V2",
icon="cwiconA")
self.console = self.addConsole()
self.results = ResultsPlotting()
#self.resultsDialog = ResultsDialog(self)
#self.addShowStats()
self.addWaveforms()
numPreprocessingStep = 4
self.preprocessingListGUI = [None] * numPreprocessingStep
self.utilList = []
self.traceExplorerDialog = TraceExplorerDialog(self)
self.traceExplorerDialog.scriptsUpdated.connect(self.reloadScripts)
self.traceExplorerDialog.runScriptFunction.connect(self.runFunc)
self.utilList.append(self.traceExplorerDialog)
self.keyScheduleDialog = KeyScheduleDialog(self)
self.scriptList = []
self.scriptList.append({'widget': MainScriptEditor(self)})
self.scriptList[0]['filename'] = self.scriptList[0]['widget'].filename
self.scriptList[0]['dockname'] = 'Auto-Generated'
self.defaultEditor = self.scriptList[0]
autogen = (self.scriptList[0]['dockname'],
self.scriptList[0]['filename'])
self.cwParams = [
{
'name':
'Attack Script',
'type':
'group',
'children': [
{
'name': 'Filename',
'key': 'attackfilelist',
'type': 'filelist',
'values': {
autogen: 0
},
'value': 0,
'editor': self.editorControl,
}, # , 'values':self.attackscripts, 'value':None
]
},
{
'name':
'Traces',
'type':
'group',
'children': [{
'name': 'Points',
'type': 'int',
'value': 0,
'readonly': True
}, {
'name': 'Traces',
'type': 'int',
'value': 0,
'readonly': True
}]
},
{
'name':
'Pre-Processing',
'type':
'group',
'children': [{
'name': 'Module #%d' % step,
'type': 'list',
'value': 0,
'values': Preprocessing.listAll(self),
'set': partial(self.setPreprocessing, step)
} for step in range(0, numPreprocessingStep)]
},
{
'name':
'Attack',
'type':
'group',
'children': [
{
'name': 'Module',
'type': 'list',
'values': {
'CPA':
CPA(self,
console=self.console,
showScriptParameter=self.showScriptParameter),
'Profiling':
Profiling(
self,
console=self.console,
showScriptParameter=self.showScriptParameter)
},
'value': 'CPA',
'set': self.setAttack
},
]
},
{
'name': 'Post-Processing',
'type': 'group'
},
{
'name':
'Result Collection',
'type':
'group',
'children': [{
'name':
'Input Trace Plot',
'type':
'group',
'children': [
{
'name': 'Enabled',
'type': 'bool',
'value': True
},
{
'name': 'Redraw after Each (slower)',
'type': 'bool',
'value': True,
'set': self.setPlotInputEach
},
{
'name': 'Trace Range',
'key': 'tracerng',
'type': 'range',
'limits': (0, 0)
},
{
'name': 'Point Range',
'key': 'pointrng',
'type': 'rangegraph',
'limits': (0, 0),
'graphwidget': self.waveformDock.widget()
},
{
'name': 'Redraw',
'type': 'action',
'action': self.plotInputTrace
},
]
}]
},
]
self.plotInputEach = False
self.da = None
self.numTraces = 100
self.traceLimits = 0
self.pointLimits = 0
self.addToolbars()
self.addSettingsDocks()
for d in self.results.dockList():
self.addDockWidget(Qt.RightDockWidgetArea, d)
self.addWindowMenuAction(d.toggleViewAction(), "Results")
self.enforceMenuOrder()
self.editorDocks()
self.restoreDockGeometry()
#Generate correct tab order now that we've restored
self.tabifyDockWidget(self.settingsNormalDock,
self.settingsPreprocessingDock)
self.tabifyDockWidget(self.settingsNormalDock, self.settingsAttackDock)
self.tabifyDockWidget(self.settingsNormalDock,
self.settingsPostProcessingDock)
self.tabifyDockWidget(self.settingsNormalDock,
self.settingsResultsDock)
for d in self.results.dockList():
self.tabifyDockWidget(self.waveformDock, d)
self.newProject()
self.newFile.connect(self.newProject)
self.saveFile.connect(self.saveProject)
self.openFile.connect(self.openProject)
self.manageTraces.tracesChanged.connect(self.tracesChanged)
cpaTemp = CPA(self,
console=self.console,
showScriptParameter=self.showScriptParameter)
self.setAttack(cpaTemp)
self.setupPreprocessorChain()
