def test_two_qubit_diagonal_gate_quil_output():
pyquil = pytest.importorskip("pyquil")
pyquil_simulation_tools = pytest.importorskip("pyquil.simulation.tools")
q0, q1 = _make_qubits(2)
operations = [
cirq.TwoQubitDiagonalGate([np.pi / 2, 0, 0, 0])(q0, q1),
cirq.TwoQubitDiagonalGate([0, np.pi / 2, 0, 0])(q0, q1),
cirq.TwoQubitDiagonalGate([0, 0, np.pi / 2, 0])(q0, q1),
cirq.TwoQubitDiagonalGate([0, 0, 0, np.pi / 2])(q0, q1),
]
output = cirq.QuilOutput(operations, (q0, q1))
program = pyquil.Program(str(output))
assert f"\n{program.out()}" == QUIL_CPHASES_PROGRAM
pyquil_unitary = pyquil_simulation_tools.program_unitary(program,
n_qubits=2)
# Qubit ordering differs between pyQuil and Cirq.
cirq_unitary = cirq.Circuit(cirq.SWAP(q0, q1), operations,
cirq.SWAP(q0, q1)).unitary()
assert np.allclose(pyquil_unitary, cirq_unitary)
# Also test non-CPHASE case.
operations = [
cirq.TwoQubitDiagonalGate([0, 0, 0, 0])(q0, q1),
]
output = cirq.QuilOutput(operations, (q0, q1))
program = pyquil.Program(str(output))
assert f"\n{program.out()}" == QUIL_DIAGONAL_DEFGATE_PROGRAM
def test_two_qubit_diagonal_gate_quil_output():
pyquil = pytest.importorskip("pyquil")
pyquil_simulation_tools = pytest.importorskip("pyquil.simulation.tools")
q0, q1 = _make_qubits(2)
operations = [
cirq.TwoQubitDiagonalGate([np.pi / 2, 0, 0, 0])(q0, q1),
cirq.TwoQubitDiagonalGate([0, np.pi / 2, 0, 0])(q0, q1),
cirq.TwoQubitDiagonalGate([0, 0, np.pi / 2, 0])(q0, q1),
cirq.TwoQubitDiagonalGate([0, 0, 0, np.pi / 2])(q0, q1),
]
with cirq.testing.assert_deprecated(deadline='v1.0', count=54):
output = cirq.QuilOutput(operations, (q0, q1))
program = pyquil.Program(str(output))
assert f"\n{program.out()}" == QUIL_CPHASES_PROGRAM
pyquil_unitary = pyquil_simulation_tools.program_unitary(program,
n_qubits=2)
# Qubit ordering differs between pyQuil and Cirq.
cirq_unitary = cirq.Circuit(cirq.SWAP(q0, q1), operations,
cirq.SWAP(q0, q1)).unitary()
assert np.allclose(pyquil_unitary, cirq_unitary)
# Also test non-CPHASE case, which decomposes into X/RZ/CPhase
operations = [cirq.TwoQubitDiagonalGate([0, 0, 0, 0])(q0, q1)]
output = cirq.QuilOutput(operations, (q0, q1))
program = pyquil.Program(str(output))
assert f"\n{program.out()}" == QUIL_DIAGONAL_DECOMPOSE_PROGRAM
def test_single_gate_with_parameter():
(q0, ) = _make_qubits(1)
with cirq.testing.assert_deprecated(deadline='v1.0', count=6):
output = cirq.QuilOutput((cirq.X(q0)**0.5, ), (q0, ))
assert (str(output) == f"""# Created using Cirq.
RX({np.pi / 2}) 0\n""")
def test_equivalent_unitaries():
"""This test covers the factor of pi change. However, it will be skipped
if pyquil is unavailable for import.
References:
https://docs.pytest.org/en/latest/skipping.html#skipping-on-a-missing-import-dependency
"""
pyquil = pytest.importorskip("pyquil")
pyquil_simulation_tools = pytest.importorskip("pyquil.simulation.tools")
q0, q1 = _make_qubits(2)
operations = [
cirq.XPowGate(exponent=0.5, global_shift=-0.5)(q0),
cirq.YPowGate(exponent=0.5, global_shift=-0.5)(q0),
cirq.ZPowGate(exponent=0.5, global_shift=-0.5)(q0),
cirq.CZPowGate(exponent=0.5)(q0, q1),
cirq.ISwapPowGate(exponent=0.5)(q0, q1),
]
output = cirq.QuilOutput(operations, (q0, q1))
program = pyquil.Program(str(output))
pyquil_unitary = pyquil_simulation_tools.program_unitary(program,
n_qubits=2)
# Qubit ordering differs between pyQuil and Cirq.
cirq_unitary = cirq.Circuit(cirq.SWAP(q0, q1), operations,
cirq.SWAP(q0, q1)).unitary()
assert np.allclose(pyquil_unitary, cirq_unitary)
def test_two_quil_one_qubit_gate_output():
(q0,) = _make_qubits(1)
gate = QuilOneQubitGate(np.array([[1, 0], [0, 1]]))
gate1 = QuilOneQubitGate(np.array([[2, 0], [0, 3]]))
output = cirq.QuilOutput(
(
gate.on(q0),
gate1.on(q0),
),
(q0,),
)
assert (
str(output)
== """# Created using Cirq.
DEFGATE USERGATE1:
1.0+0.0i, 0.0+0.0i
0.0+0.0i, 1.0+0.0i
USERGATE1 0
DEFGATE USERGATE2:
2.0+0.0i, 0.0+0.0i
0.0+0.0i, 3.0+0.0i
USERGATE2 0
"""
)
def test_single_gate_named_qubit():
q = cirq.NamedQubit('qTest')
with cirq.testing.assert_deprecated(deadline='v1.0', count=6):
output = cirq.QuilOutput((cirq.X(q), ), (q, ))
assert (str(output) == """# Created using Cirq.
X 0\n""")
def test_quil_two_qubit_gate_output():
(
q0,
q1,
) = _make_qubits(2)
gate = QuilTwoQubitGate(np.array([[1, 0, 0, 0], [0, 1, 0, 0], [0, 0, 1, 0], [0, 0, 0, 1]]))
output = cirq.QuilOutput(
(gate.on(q0, q1),),
(
q0,
q1,
),
)
assert (
str(output)
== """# Created using Cirq.
DEFGATE USERGATE1:
1.0+0.0i, 0.0+0.0i, 0.0+0.0i, 0.0+0.0i
0.0+0.0i, 1.0+0.0i, 0.0+0.0i, 0.0+0.0i
0.0+0.0i, 0.0+0.0i, 1.0+0.0i, 0.0+0.0i
0.0+0.0i, 0.0+0.0i, 0.0+0.0i, 1.0+0.0i
USERGATE1 0 1
"""
)
def test_pauli_interaction_gate():
q0, q1, = _make_qubits(2)
output = cirq.QuilOutput(PauliInteractionGate.CZ.on(q0, q1), (
q0,
q1,
))
assert str(output) == """# Created using Cirq.
def test_i_swap_with_power():
q0, q1 = _make_qubits(2)
output = cirq.QuilOutput((cirq.ISWAP(q0, q1)**0.25,), (
q0,
q1,
))
assert str(output) == f"""# Created using Cirq.
def test_pauli_interaction_gate():
(q0, q1) = _make_qubits(2)
with cirq.testing.assert_deprecated(deadline='v1.0', count=16):
output = cirq.QuilOutput(PauliInteractionGate.CZ.on(q0, q1), (q0, q1))
assert (str(output) == """# Created using Cirq.
CZ 0 1
""")
def test_i_swap_with_power():
q0, q1 = _make_qubits(2)
with cirq.testing.assert_deprecated(deadline='v1.0', count=6):
output = cirq.QuilOutput((cirq.ISWAP(q0, q1)**0.25, ), (q0, q1))
assert (str(output) == f"""# Created using Cirq.
XY({np.pi / 4}) 0 1
""")
def test_h_gate_with_parameter():
q0, = _make_qubits(1)
output = cirq.QuilOutput((cirq.H(q0)**0.25,), (q0,))
assert (str(output) == f"""# Created using Cirq.
RY({np.pi / 4}) 0
RX({np.pi / 4}) 0
RY({-np.pi / 4}) 0\n""")
def test_quil_two_qubit_gate_output():
q0, q1, = _make_qubits(2)
gate = QuilTwoQubitGate(
np.array([[1, 0, 0, 0], [0, 1, 0, 0], [0, 0, 1, 0], [0, 0, 0, 1]]))
output = cirq.QuilOutput((gate.on(q0, q1),), (
q0,
q1,
))
assert str(output) == """# Created using Cirq.
def test_two_quil_one_qubit_gate_output():
q0, = _make_qubits(1)
gate = QuilOneQubitGate(np.array([[1, 0], [0, 1]]))
gate1 = QuilOneQubitGate(np.array([[2, 0], [0, 3]]))
output = cirq.QuilOutput((
gate.on(q0),
gate1.on(q0),
), (q0,))
assert str(output) == """# Created using Cirq.
def test_single_gate_no_parameter():
(q0,) = _make_qubits(1)
output = cirq.QuilOutput((cirq.X(q0),), (q0,))
assert (
str(output)
== """# Created using Cirq.
X 0\n"""
)
def test_single_gate_with_parameter():
(q0,) = _make_qubits(1)
output = cirq.QuilOutput((cirq.X(q0) ** 0.5,), (q0,))
assert (
str(output)
== f"""# Created using Cirq.
RX({np.pi / 2}) 0\n"""
)
def test_single_gate_named_qubit():
q = cirq.NamedQubit('qTest')
output = cirq.QuilOutput((cirq.X(q),), (q,))
assert (
str(output)
== """# Created using Cirq.
X 0\n"""
)
def test_unsupported_operation():
q0, = _make_qubits(1)
class UnsupportedOperation(cirq.Operation):
qubits = (q0,)
with_qubits = NotImplemented
output = cirq.QuilOutput((UnsupportedOperation(),), (q0,))
with pytest.raises(ValueError):
_ = str(output)
def test_save_to_file(tmpdir):
file_path = os.path.join(tmpdir, 'test.quil')
q0, = _make_qubits(1)
output = cirq.QuilOutput((cirq.X(q0)), (q0,))
output.save_to_file(file_path)
with open(file_path, 'r') as f:
file_content = f.read()
assert (file_content == """# Created using Cirq.
X 0\n""")
def test_save_to_file(tmpdir):
file_path = os.path.join(tmpdir, 'test.quil')
(q0, ) = _make_qubits(1)
with cirq.testing.assert_deprecated(deadline='v1.0', count=6):
output = cirq.QuilOutput((cirq.X(q0)), (q0, ))
output.save_to_file(file_path)
with open(file_path, 'r') as f:
file_content = f.read()
assert (file_content == """# Created using Cirq.
X 0\n""")
def test_unsupported_operation():
(q0, ) = _make_qubits(1)
class UnsupportedOperation(cirq.Operation):
qubits = (q0, )
with_qubits = NotImplemented
with cirq.testing.assert_deprecated(deadline='v1.0', count=3):
output = cirq.QuilOutput((UnsupportedOperation(), ), (q0, ))
with pytest.raises(ValueError):
_ = str(output)
def test_quil_one_qubit_gate_output():
(q0, ) = _make_qubits(1)
with cirq.testing.assert_deprecated(deadline='v1.0', count=7):
gate = QuilOneQubitGate(np.array([[1, 0], [0, 1]]))
output = cirq.QuilOutput((gate.on(q0), ), (q0, ))
assert (str(output) == """# Created using Cirq.
DEFGATE USERGATE1:
1.0+0.0i, 0.0+0.0i
0.0+0.0i, 1.0+0.0i
USERGATE1 0
""")
def test_parseable_defgate_output():
pyquil = pytest.importorskip("pyquil")
q0, q1 = _make_qubits(2)
operations = [
QuilOneQubitGate(np.array([[1, 0], [0, 1]])).on(q0),
QuilTwoQubitGate(
np.array([[1, 0, 0, 0], [0, 1, 0, 0], [0, 0, 1, 0],
[0, 0, 0, 1]])).on(q0, q1)
]
output = cirq.QuilOutput(operations, (q0, q1))
# Just checks that we can create a pyQuil Program without crashing.
pyquil.Program(str(output))
def test_all_operations():
qubits = tuple(_make_qubits(5))
operations = _all_operations(*qubits, include_measurements=False)
output = cirq.QuilOutput(operations, qubits)
assert (str(output) == f"""# Created using Cirq.
DECLARE m0 BIT[1]
DECLARE m1 BIT[1]
DECLARE m2 BIT[1]
DECLARE m3 BIT[3]
Z 0
RZ({5 * np.pi / 8}) 0
Y 0
RY({3 * np.pi / 8}) 0
X 0
RX({7 * np.pi / 8}) 0
H 1
CZ 0 1
CPHASE({np.pi / 4}) 0 1
CNOT 0 1
RY({-np.pi / 2}) 1
CPHASE({np.pi / 2}) 0 1
RY({np.pi / 2}) 1
SWAP 0 1
PSWAP({3 * np.pi / 4}) 0 1
H 2
CCNOT 0 1 2
H 2
CCNOT 0 1 2
RZ({np.pi / 8}) 0
RZ({np.pi / 8}) 1
RZ({np.pi / 8}) 2
CNOT 0 1
CNOT 1 2
RZ({-np.pi / 8}) 1
RZ({np.pi / 8}) 2
CNOT 0 1
CNOT 1 2
RZ({-np.pi / 8}) 2
CNOT 0 1
CNOT 1 2
RZ({-np.pi / 8}) 2
CNOT 0 1
CNOT 1 2
H 2
RZ({np.pi / 8}) 0
RZ({np.pi / 8}) 1
RZ({np.pi / 8}) 2
CNOT 0 1
CNOT 1 2
RZ({-np.pi / 8}) 1
RZ({np.pi / 8}) 2
CNOT 0 1
CNOT 1 2
RZ({-np.pi / 8}) 2
CNOT 0 1
CNOT 1 2
RZ({-np.pi / 8}) 2
CNOT 0 1
CNOT 1 2
H 2
CSWAP 0 1 2
X 0
X 1
RX({3 * np.pi / 4}) 0
RX({3 * np.pi / 4}) 1
Y 0
Y 1
RY({3 * np.pi / 4}) 0
RY({3 * np.pi / 4}) 1
Z 0
Z 1
RZ({3 * np.pi / 4}) 0
RZ({3 * np.pi / 4}) 1
I 0
I 0
I 1
I 2
ISWAP 2 0
RZ({-0.111 * np.pi}) 1
RX({np.pi / 4}) 1
RZ({0.111 * np.pi}) 1
RZ({-0.333 * np.pi}) 1
RX({np.pi / 2}) 1
RZ({0.333 * np.pi}) 1
RZ({-0.777 * np.pi}) 1
RX({-np.pi / 2}) 1
RZ({0.777 * np.pi}) 1
WAIT
MEASURE 0 m0[0]
MEASURE 2 m1[0]
MEASURE 3 m2[0]
MEASURE 2 m1[0]
MEASURE 1 m3[0]
X 2 # Inverting for following measurement
MEASURE 2 m3[1]
MEASURE 3 m3[2]
""")
