def _start_fetch(self):
# type: () -> None
"""Start the job on the site the host is monitored by"""
if config.site_is_local(self._request.host.site_id()):
start_fetch_agent_job(self._request)
return
watolib.do_remote_automation(config.site(
self._request.host.site_id()), "fetch-agent-output-start", [
("request", repr(self._request.serialize())),
])
def site_globals_editable(site_id, site) -> bool:
# Site is a remote site of another site. Allow to edit probably pushed site
# specific globals when remote WATO is enabled
if config.is_wato_slave_site():
return True
# Local site: Don't enable site specific locals when no remote sites configured
if not config.has_wato_slave_sites():
return False
return site["replication"] or config.site_is_local(site_id)
def user_sync_default_config(site_name: SiteId) -> UserSyncConfig:
global_user_sync = _transform_userdb_automatic_sync(config.userdb_automatic_sync)
if global_user_sync == "master":
if config.site_is_local(site_name) and not config.is_wato_slave_site():
user_sync_default: UserSyncConfig = "all"
else:
user_sync_default = None
else:
user_sync_default = global_user_sync
return user_sync_default
def check_mk_automation(siteid,
command,
args=None,
indata="",
stdin_data=None,
timeout=None,
sync=True):
if args is None:
args = []
if not siteid or config.site_is_local(siteid):
return check_mk_local_automation(command, args, indata, stdin_data, timeout)
return check_mk_remote_automation(siteid, command, args, indata, stdin_data, timeout, sync)
def _perform_tests_for_site(
self, site_id: SiteId,
result_queue: 'multiprocessing.Queue[Tuple[SiteId, str]]') -> None:
self._logger.debug("[%s] Starting" % site_id)
try:
# Would be better to clean all open fds that are not needed, but we don't
# know the FDs of the result_queue pipe. Can we find it out somehow?
# Cleanup resources of the apache
#for x in range(3, 256):
# try:
# os.close(x)
# except OSError, e:
# if e.errno == errno.EBADF:
# pass
# else:
# raise
# Reinitialize logging targets
log.init_logging() # NOTE: We run in a subprocess!
if config.site_is_local(site_id):
automation = AutomationCheckAnalyzeConfig()
results_data = automation.execute(automation.get_request())
else:
results_data = watolib.do_remote_automation(
config.site(site_id),
"check-analyze-config", [],
timeout=html.request.request_timeout - 10)
self._logger.debug("[%s] Finished" % site_id)
result = {
"state": 0,
"response": results_data,
}
except Exception:
self._logger.exception("[%s] Failed" % site_id)
result = {
"state":
1,
"response":
"Traceback:<br>%s" %
(traceback.format_exc().replace("\n", "<br>\n")),
}
finally:
result_queue.put((site_id, repr(result)))
result_queue.close()
result_queue.join_thread()
result_queue.join()
def _update_distributed_wato_file(sites):
# Note: we cannot access config.sites here, since we
# are currently in the process of saving the new
# site configuration.
distributed = False
for siteid, site in sites.items():
if site.get("replication"):
distributed = True
if config.site_is_local(siteid):
create_distributed_wato_file(siteid, is_slave=False)
# Remove the distributed wato file
# a) If there is no distributed WATO setup
# b) If the local site could not be gathered
if not distributed: # or not found_local:
_delete_distributed_wato_file()
def _add_change_to_site(self, site_id: SiteId, change_id: str,
action_name: str, text: LogMessage,
object_ref: Optional[ObjectRef], add_user: bool,
need_sync: Optional[bool],
need_restart: Optional[bool],
domains: List[Type[ABCConfigDomain]]) -> None:
# Individual changes may override the domain restart default value
if need_restart is None:
need_restart = any(d.needs_activation for d in domains)
if need_sync is None:
need_sync = any(d.needs_sync for d in domains)
# Using attrencode here is against our regular rule to do the escaping
# at the last possible time: When rendering. But this here is the last
# place where we can distinguish between HTML() encapsulated (already)
# escaped / allowed HTML and strings to be escaped.
text = escaping.escape_text(text)
# If the local site don't need a restart, there is no reason to add a
# change for that site. Otherwise the activation page would show a
# change but the site would not be selected for activation.
if config.site_is_local(site_id) and need_restart is False:
return None
SiteChanges(SiteChanges.make_path(site_id)).append({
"id":
change_id,
"action_name":
action_name,
"text":
"%s" % text,
"object":
object_ref,
"user_id":
config.user.id if add_user else None,
"domains": [d.ident() for d in domains],
"time":
time.time(),
"need_sync":
need_sync,
"need_restart":
need_restart,
})
def _call_activate_changes_automation(self):
domains = self._get_domains_needing_activation()
if config.site_is_local(self._site_id):
return execute_activate_changes(domains)
try:
response = cmk.gui.watolib.automations.do_remote_automation(
config.site(self._site_id), "activate-changes", [
("domains", repr(domains)),
("site_id", self._site_id),
])
except cmk.gui.watolib.automations.MKAutomationException as e:
if "Invalid automation command: activate-changes" in "%s" % e:
raise MKGeneralException(
"Activate changes failed (%s). The version of this site may be too old.")
else:
raise
return response
def _update_distributed_wato_file(sites):
# Note: we cannot access config.sites here, since we
# are currently in the process of saving the new
# site configuration.
distributed = False
for siteid, site in sites.items():
if site.get("replication"):
distributed = True
if config.site_is_local(siteid):
cmk.gui.watolib.activate_changes.create_distributed_wato_files(
base_dir=Path(cmk.utils.paths.omd_root),
site_id=siteid,
is_remote=False,
)
# Remove the distributed wato file
# a) If there is no distributed WATO setup
# b) If the local site could not be gathered
if not distributed: # or not found_local:
_delete_distributed_wato_file()
def get_check_table(
discovery_request: StartDiscoveryRequest) -> DiscoveryResult:
"""Gathers the check table using a background job
Cares about handling local / remote sites using an automation call. In both cases
the ServiceDiscoveryBackgroundJob is executed to care about collecting the check
table asynchronously. In case of a remote site the chain is:
Starting from central site:
_get_check_table()
|
v
automation service-discovery-job-discover
|
v
to remote site
|
v
AutomationServiceDiscoveryJob().execute()
|
v
_get_check_table()
"""
if discovery_request.options.action == DiscoveryAction.REFRESH:
watolib.add_service_change(
discovery_request.host, "refresh-autochecks",
_("Refreshed check configuration of host '%s'") %
discovery_request.host.name())
if config.site_is_local(discovery_request.host.site_id()):
return execute_discovery_job(discovery_request)
discovery_result = _get_check_table_from_remote(discovery_request)
discovery_result = _add_missing_discovery_result_fields(discovery_result)
return discovery_result
def check_mk_automation(siteid: SiteId,
command: str,
args: Optional[Sequence[str]] = None,
indata: Any = "",
stdin_data: Optional[str] = None,
timeout: Optional[int] = None,
sync: bool = True,
non_blocking_http: bool = False) -> Any:
if args is None:
args = []
if not siteid or config.site_is_local(siteid):
return check_mk_local_automation(command, args, indata, stdin_data, timeout)
return check_mk_remote_automation(
site_id=siteid,
command=command,
args=args,
indata=indata,
stdin_data=stdin_data,
timeout=timeout,
sync=sync,
non_blocking_http=non_blocking_http,
)
def is_sync_needed(self, site_id):
if config.site_is_local(site_id):
return False
return any([c["need_sync"] for c in self._changes_of_site(site_id)])
def _site_is_logged_in(self, site_id, site):
return config.site_is_local(site_id) or "secret" in site
def execute_network_scan_job() -> None:
init_wato_datastructures(with_wato_lock=True)
if watolib.is_wato_slave_site():
return # Don't execute this job on slaves.
folder = find_folder_to_scan()
if not folder:
return # Nothing to do.
# We need to have the context of the user. The jobs are executed when
# config.set_user_by_id() has not been executed yet. So there is no user context
# available. Use the run_as attribute from the job config and revert
# the previous state after completion.
old_user = config.user.id
run_as = folder.attribute("network_scan")["run_as"]
if not userdb.user_exists(run_as):
raise MKGeneralException(
_("The user %s used by the network "
"scan of the folder %s does not exist.") % (run_as, folder.title()))
config.set_user_by_id(folder.attribute("network_scan")["run_as"])
result: NetworkScanResult = {
"start": time.time(),
"end": True, # means currently running
"state": None,
"output": "The scan is currently running.",
}
# Mark the scan in progress: Is important in case the request takes longer than
# the interval of the cron job (1 minute). Otherwise the scan might be started
# a second time before the first one finished.
save_network_scan_result(folder, result)
try:
if config.site_is_local(folder.site_id()):
found = cmk.gui.watolib.network_scan.do_network_scan(folder)
else:
found = watolib.do_remote_automation(config.site(folder.site_id()), "network-scan",
[("folder", folder.path())])
if not isinstance(found, list):
raise MKGeneralException(_("Received an invalid network scan result: %r") % found)
add_scanned_hosts_to_folder(folder, found)
result.update({
"state": True,
"output": _("The network scan found %d new hosts.") % len(found),
})
except Exception as e:
result.update({
"state": False,
"output": _("An exception occured: %s") % e,
})
logger.error("Exception in network scan:\n%s", traceback.format_exc())
result["end"] = time.time()
save_network_scan_result(folder, result)
if old_user:
config.set_user_by_id(old_user)
