def is_number(self, val):
compilestr = re.compile(r'^([1-9]\d*|0)(\.\d{1,2})?$')
result = compilestr.match(val)
if result:
_create_log_file("数字")
else:
_create_log_file("非法字符")
return result
def uploadFile_FUN(self, event):
fileFilter = "Dicom (*.dcm)|*.dcm|" "All files (*.*)|*.*"
fileDialog = wx.FileDialog(self,
message="选择证书文件",
wildcard=fileFilter,
style=wx.FD_OPEN)
dialogResult = fileDialog.ShowModal()
if dialogResult != wx.ID_OK:
return
path = fileDialog.GetPath()
fileDialog.Destroy()
_create_log_file("文件地址：" + path)
isusing = _is_using(path)
if isusing:
self.show_message("认证成功,请重新打开", None, False)
else:
self.show_message("请确认认证文件是否正确", None, False)
# -*- coding: utf-8 -*-
from com.win.client.MainWX import MainWX
from com.win.utils.BaseUtils import _is_stoped, _create_log_file
import os
if __name__ == '__main__':
isstoped = _is_stoped()
if isstoped:
app = MainWX()
app.MainLoop()
else:
os.system('TASKKILL /F /IM MainUI.exe')
_create_log_file("请检查是否打开多个未关闭的PY模型图")
def registFunc(self, phonenumber, secretkey):
_create_log_file(phonenumber)
_create_log_file(secretkey)
def on_window_category_Box_selected(self, event):
_create_log_file("类型选择")
def on_inner_pipe_spec_Box_selected(self, event):
_create_log_file("内管选择")
def on_inner_rod_spec_Box_selected(self, event):
_create_log_file("内杆规格")
def on_out_line_spec_Box_selected(self, event):
_create_log_file("外框选择")
def on_clacu_click(self, event):
is_show_model = True
w_val = self.w_input.GetValue() #测量长
h_val = self.h_input.GetValue() #测量宽
h_is_number = self.is_number(h_val)
w_is_number = self.is_number(w_val)
out_line_spec_val = self.out_line_spec_Box.GetValue() #外框规格25 x 25
inner_rod_spec_val = self.inner_rod_spec_Box.GetValue() #内杆规格25 x 25
inner_pipe_spec_val = self.inner_pipe_spec_Box.GetValue(
) #内管规格 19 x 19
inner_pipe_spec_num = self.base_configs['set']['inner_width'] #19
window_category = self.window_category_Box.GetValue() #款式 横 竖
if h_is_number is None:
self.show_message("非法字符，请输入正确的高度，是否清除？", self.h_input, True)
return
if w_is_number is None:
self.show_message("非法字符，请输入正确的宽度，是否清除？", self.w_input, True)
return
if window_category == "":
self.show_message("请选择管款式", None, False)
return
measure_w_float = float(w_val) #测量长
measure_h_float = float(h_val) #测量宽
if out_line_spec_val == "":
self.show_message("请选择外框规格", None, False)
return
if measure_w_float > 3200 or measure_h_float > 3200 or measure_w_float < 500 or measure_h_float < 500:
is_show_model = False
self.show_message("在试用版测量长、宽大于3500不显示效果图", None, False)
# 外边框规格
start_index_out_line_spec = out_line_spec_val.index("X")
end_index_out_line_spec = len(out_line_spec_val)
out_line_spec_num_show = float(
out_line_spec_val[0:start_index_out_line_spec]) #可视宽度 计算
out_line_spec_num_hidden = float(
out_line_spec_val[start_index_out_line_spec +
2:end_index_out_line_spec]) #不可视宽度
# 内杆规格
start_index_inner_rod_spec = inner_rod_spec_val.index("X")
end_index_inner_rod_spec = len(inner_rod_spec_val)
inner_rod_spec_num_show = float(
inner_rod_spec_val[0:start_index_inner_rod_spec]) #可视宽度 计算
inner_rod_spec_num_hidden = float(
inner_rod_spec_val[start_index_inner_rod_spec +
2:end_index_inner_rod_spec]) #不可视宽度 计算
if inner_rod_spec_num_hidden > out_line_spec_num_hidden:
self.show_message("所选内杆参数大于边框参数", None, False)
return
if inner_pipe_spec_num > inner_rod_spec_num_hidden:
self.show_message("所选内管参数大于内杆参数", None, False)
return
if window_category == "横式":
#总长 1500 内管19x19 间距 100
space_width = self.base_configs['set']['width_range'][0][
'max'] #间距100
inner_pipe_count = self.on_calcute_result(measure_h_float,
out_line_spec_num_show,
space_width,
inner_pipe_spec_num)
_create_log_file("内管" + str(inner_pipe_count))
#总长2000 内杆25x25 间距 400
space_width = self.base_configs['set']['length_range'][0][
'max'] # 间距400
inner_rod_count = self.on_calcute_result(measure_w_float,
out_line_spec_num_show,
space_width,
inner_rod_spec_num_show)
_create_log_file("内杆" + str(inner_rod_count))
#竖着多处一点20
measure_h_float_result_extend = measure_h_float + self.base_configs[
'set']['vertical_extend_max'] # 垂直方向多处20mm
measure_h_rod_float_result = measure_h_float - 2 * out_line_spec_num_show # 内杆
measure_w_pipe_float_result = measure_w_float - 2 * out_line_spec_num_show + self.base_configs[
'set']['inner_error_max'] # 内管
self.fill_rich_txt(out_line_spec_val,
measure_h_float_result_extend, measure_w_float,
inner_rod_spec_val, measure_h_rod_float_result,
inner_rod_count, inner_pipe_spec_val,
measure_w_pipe_float_result, inner_pipe_count)
#画图
if is_show_model:
pass
input_width = measure_w_float / 1000
input_height = measure_h_float / 1000
horizontal_num = math.ceil(inner_pipe_count) + 2 # 19x19
vertical_num = math.ceil(inner_rod_count) + 2 # 25x25
main_pipe_w = out_line_spec_num_show / 1000 # 主管宽 换算成m
inner_rod_w = inner_rod_spec_num_show / 1000 #内杆 25
inner_pipe_w = inner_pipe_spec_num / 1000 # 内管宽19 换算成m
extend_w = self.base_configs['set']['vertical_extend_max'] / 1000
self.graphTool.draw_graph(input_width, input_height,
horizontal_num, vertical_num,
main_pipe_w, inner_rod_w, inner_pipe_w,
extend_w, "横式", out_line_spec_val,
inner_rod_spec_val, inner_pipe_spec_val)
elif window_category == "竖式":
#总长 1500 内杆 25x25 间距 400
space_width = self.base_configs['set']['length_range'][0][
'max'] # 间距400
inner_rod_count = self.on_calcute_result(measure_h_float,
out_line_spec_num_show,
space_width,
inner_rod_spec_num_show)
_create_log_file("内杆" + str(inner_rod_count))
#总长 2000 内管19 x 19 间距100
space_width = self.base_configs['set']['width_range'][0][
'max'] #间距100
inner_pipe_count = self.on_calcute_result(measure_w_float,
out_line_spec_num_show,
space_width,
inner_pipe_spec_num)
_create_log_file("内管" + str(inner_pipe_count))
measure_h_float_result_extend = measure_h_float + self.base_configs[
'set']['vertical_extend_max'] # 垂直方向多处20mm
measure_w_rod_float_result = measure_w_float - 2 * out_line_spec_num_show #内杆
measure_h_pipe_float_result = measure_h_float - 2 * out_line_spec_num_show + self.base_configs[
'set']['inner_error_max'] # 内管
self.fill_rich_txt(out_line_spec_val,
measure_h_float_result_extend, measure_w_float,
inner_rod_spec_val, measure_w_rod_float_result,
inner_rod_count, inner_pipe_spec_val,
measure_h_pipe_float_result, inner_pipe_count)
if is_show_model:
pass
input_width = measure_w_float / 1000
input_height = measure_h_float / 1000
horizontal_num = math.ceil(inner_rod_count) + 2 # 19x19
vertical_num = math.ceil(inner_pipe_count) + 2 # 25x25
main_pipe_w = out_line_spec_num_show / 1000 # 主管宽 换算成m
inner_rod_w = inner_rod_spec_num_show / 1000 # 内管宽25 换算成m
inner_pipe_w = inner_pipe_spec_num / 1000 # 内管 19
extend_w = self.base_configs['set']['vertical_extend_max'] / 1000
self.graphTool.draw_graph(input_width, input_height,
horizontal_num, vertical_num,
main_pipe_w, inner_rod_w, inner_pipe_w,
extend_w, "竖式", out_line_spec_val,
inner_rod_spec_val, inner_pipe_spec_val)
def draw_graph(self, input_width, input_height, horizontal_num,
vertical_num, main_pipe_w, inner_rod_w, inner_pipe_w,
extend_w, category, out_line_spec, inner_rod_spec,
inner_pipe_spec):
if category == "竖式":
self.horizontal_pipe_bold = 7.0
self.vertical_pipe_bold = 1.0
self.vertical_pipe_color = "blue"
self.horizontal_pipe_color = "red"
self.dashed_color_h = "red"
self.dashed_color_v = "blue"
self.pipe_horizontal = inner_rod_w
self.pipe_vertical = inner_pipe_w
self.inner_rod_count = horizontal_num
self.inner_pipe_count = vertical_num
elif category == "横式":
self.horizontal_pipe_bold = 1.0
self.vertical_pipe_bold = 7.0
self.vertical_pipe_color = "red"
self.horizontal_pipe_color = "blue"
self.dashed_color_h = "blue"
self.dashed_color_v = "red"
self.pipe_horizontal = inner_pipe_w
self.pipe_vertical = inner_rod_w
self.inner_rod_count = vertical_num
self.inner_pipe_count = horizontal_num
plt.figure(figsize=(20, 20)) #设置显示图大小
ax = plt.subplot(111) #注意 ax设置不再试用plot中设置
##############开始画图#################
#间距
h_num_extend_h = input_height + extend_w
mm_h_num_extend_h = h_num_extend_h * 1000
h_num = horizontal_num - 1
v_num = vertical_num - 1
# 坐标轴 垂直线间距
vertical_space = input_height / h_num
# 坐标轴 水平线间距
horizontal_space = input_width / v_num
# 真实值 垂直线间距
vertical_length = self.get_space_length(input_width, main_pipe_w,
v_num, self.pipe_vertical)
# 真是值 水平线间距
horizontal_length = self.get_space_length(input_height, main_pipe_w,
h_num, self.pipe_horizontal)
# 画垂直线
for i in range(0, vertical_num):
point_x = i * horizontal_space
mm_point_x = point_x * 1000
if i == 0:
plt.plot([mm_point_x, mm_point_x], [0, mm_h_num_extend_h],
color=self.mian_pipe_color,
linewidth=self.main_pipe_bold,
linestyle="-",
label='规格：S= ' + out_line_spec + "； Number = 4")
#垂直虚线
plt.plot([mm_point_x - self.w_min, mm_point_x - self.w_min],
[0 - 2 * self.w_min, -450],
color=self.dashed_color,
linewidth=0.5,
linestyle="--") # 垂直 第一根延长虚线 黑线
# plt.plot([mm_point_x, mm_point_x ], [0, -0.3], color="red", linewidth=0.5,linestyle="--") # 垂直 第一根延长虚线
# plt.plot([mm_point_x + self.w_min, mm_point_x + self.w_min], [0, -0.15], color="red", linewidth=0.5,linestyle="--") # 垂直 第一根延长虚线
# 垂直红线
plt.plot([-100, -100], [0, vertical_space * 1000 - self.w_min],
color=self.dashed_color_v,
linewidth=0.5,
linestyle="-") # y=0.1 画垂直线 水平间距
plt.plot([-200, -200], [0 - self.w_min, input_height * 1000],
color=self.dashed_color_v,
linewidth=0.5,
linestyle="-") # y=0.1 画垂直线 水平间距
plt.plot([-400, -400],
[0 - 1.5 * self.w_min, mm_h_num_extend_h],
color=self.mian_pipe_color,
linewidth=0.5,
linestyle="-") #y=长度+延长 画垂直线 总长度
# 标识单个间隔
plt.text(-150,
0,
"L=" + str(round(horizontal_length, 2)) + "mm",
ha='left',
va='bottom',
fontdict=self.font_style,
rotation=self.v_rotation)
# 标识延长长度
plt.text(-450,
mm_h_num_extend_h / 2,
"L=" + str(round(mm_h_num_extend_h, 2)) + "mm",
ha='left',
va='bottom',
fontdict=self.font_style,
rotation=self.v_rotation)
# 标识标准长度
plt.text(-250,
mm_h_num_extend_h / 2 - 100,
"L=" + str(round(input_height * 1000, 2)) + "mm",
ha='left',
va='bottom',
fontdict=self.font_style,
rotation=self.v_rotation) # 标识总长
elif i == 1:
if category == "竖式":
plt.plot([mm_point_x, mm_point_x],
[0, input_height * 1000],
color=self.vertical_pipe_color,
linewidth=self.vertical_pipe_bold,
linestyle="-",
label='规格：S= ' + inner_pipe_spec + "； Number = " +
str(self.inner_pipe_count - 2))
elif category == "横式":
plt.plot([mm_point_x, mm_point_x],
[0, input_height * 1000],
color=self.vertical_pipe_color,
linewidth=self.vertical_pipe_bold,
linestyle="-",
label='规格：S= ' + inner_rod_spec + '； Number = ' +
str(self.inner_rod_count - 2))
plt.plot([mm_point_x, mm_point_x], [0 - self.w_min, -150],
color=self.dashed_color,
linewidth=0.5,
linestyle="--") # 垂直 第二条线延长
elif i == v_num:
# 延长最后一根线
plt.plot([mm_point_x, mm_point_x], [0, mm_h_num_extend_h],
color=self.mian_pipe_color,
linewidth=self.main_pipe_bold,
linestyle="-") #
# y=3虚线
plt.plot([0, -250], [
input_height * 1000 + self.w_min,
input_height * 1000 + self.w_min
],
color=self.dashed_color,
linewidth=0.5,
linestyle="--")
# y=3.02虚线
plt.plot([0, -450], [
mm_h_num_extend_h + self.w_min,
mm_h_num_extend_h + self.w_min
],
color=self.dashed_color,
linewidth=0.5,
linestyle="--") # 延长水平方向
else:
plt.plot([mm_point_x, mm_point_x], [0, input_height * 1000],
color=self.vertical_pipe_color,
linewidth=self.vertical_pipe_bold,
linestyle="-")
#画水平线
for i in range(0, horizontal_num):
ponit_y = i * vertical_space
mm_point_y = ponit_y * 1000
if i == 0:
plt.plot([0, input_width * 1000],
[mm_point_y - self.w_min, mm_point_y - self.w_min],
color=self.mian_pipe_color,
linewidth=self.main_pipe_bold,
linestyle="-")
#水平蓝虚线
plt.plot([0, horizontal_space * 1000 - self.w_min],
[-100, -100],
color=self.dashed_color_h,
linewidth=0.5,
linestyle="-") # 画水平线
plt.text(horizontal_space * 1000 / 2,
-100,
"L=" + str(round(vertical_length, 2)) + "mm",
ha='center',
va='bottom',
fontdict=self.font_style,
rotation=self.h_rotation)
plt.plot([0, input_width * 1000 - 1.5 * self.w_min],
[-200, -200],
color=self.dashed_color_h,
linewidth=0.5,
linestyle="-")
plt.text(input_width * 1000 / 2,
-400,
"L=" + str(round(input_width * 1000, 2)) + "mm",
ha='center',
va='bottom',
fontdict=self.font_style,
rotation=self.h_rotation)
plt.plot([0, input_width * 1000], [-400, -400],
color=self.mian_pipe_color,
linewidth=0.5,
linestyle="-")
plt.text(input_width * 1000 / 2 - 100,
-200,
"L=" + str(round(input_width * 1000 - 20, 2)) + "mm",
ha='center',
va='bottom',
fontdict=self.font_style,
rotation=self.h_rotation)
# 水平方向第一根虚线
plt.plot([-450, 0 - self.w_min],
[0 - 2 * self.w_min, 0 - 2 * self.w_min],
color=self.dashed_color,
linewidth=0.5,
linestyle="--") # 水平第条延长虚线
elif i == 1:
if category == "竖式":
plt.plot([0, input_width * 1000], [mm_point_y, mm_point_y],
color=self.horizontal_pipe_color,
linewidth=self.horizontal_pipe_bold,
linestyle="-",
label='规格：S= ' + inner_rod_spec + '； Number = ' +
str(self.inner_rod_count - 2))
elif category == "横式":
plt.plot([0, input_width * 1000], [mm_point_y, mm_point_y],
color=self.horizontal_pipe_color,
linewidth=self.horizontal_pipe_bold,
linestyle="-",
label='规格：S= ' + inner_pipe_spec + '； Number = ' +
str(self.inner_pipe_count - 2))
plt.plot([-150, 0], [mm_point_y, mm_point_y],
color=self.dashed_color,
linewidth=0.5,
linestyle="--") # 延长垂直方向线
elif i == h_num:
# 正常最后一根线
plt.plot([0, input_width * 1000], [mm_point_y, mm_point_y],
color=self.mian_pipe_color,
linewidth=self.main_pipe_bold,
linestyle="-")
# 垂直延长线
plt.plot([
input_width * 1000 + self.w_min,
input_width * 1000 + self.w_min
], [-450, 0 - self.w_min],
color=self.dashed_color,
linewidth=0.5,
linestyle="--") # 延长垂直方向线
plt.plot([
input_width * 1000 - self.w_min,
input_width * 1000 - self.w_min
], [-300, 0 - self.w_min],
color=self.dashed_color,
linewidth=0.5,
linestyle="--") # 延长垂直方向线
else:
plt.plot([0, input_width * 1000], [mm_point_y, mm_point_y],
color=self.horizontal_pipe_color,
linewidth=self.horizontal_pipe_bold,
linestyle="-")
# #############结束画图#################
#设置主刻度标签的位置 ，标签文本的格式
ax.xaxis.set_major_locator(self.x_majorLoc)
ax.xaxis.set_major_formatter(self.x_majorFor)
ax.yaxis.set_major_locator(self.y_majorLoc)
ax.yaxis.set_major_formatter(self.y_majorFor)
# 显示次刻度标签的位置,没有标签文本
ax.xaxis.set_minor_locator(self.x_minorLoc)
ax.yaxis.set_minor_locator(self.y_minorLoc)
#设置x y轴边界值y
plt.ylim(self.y_min, self.y_max)
plt.xlim(self.x_min, self.x_max)
plt.legend(loc=0)
plt.xlabel('长（mm）')
plt.ylabel('宽（mm）')
plt.title('模型图 S：横截面面积；Number：根数；L：间距',
fontsize='20',
fontweight='bold')
# plt.show()
# 保存图片位置
img_save_file_url = self.project_dir + "\\images\\"
filename = self.get_filename(input_width, input_height)
path = img_save_file_url + filename
_create_log_file(path)
plt.axis('off')
fig = plt.gcf()
plt.gca().xaxis.set_major_locator(plt.NullLocator())
plt.gca().yaxis.set_major_locator(plt.NullLocator())
plt.subplots_adjust(top=1,
bottom=0,
right=1,
left=0,
hspace=0,
wspace=0)
plt.margins(0, 0)
fig.savefig(path,
format='jpg',
transparent=True,
dpi=300,
pad_inches=0)
# plt.savefig(path, format='jpg', bbox_inches='tight', transparent=True, dpi=300)
os.system(path)
