class OpTestFWTS():
## Initialize this object
# @param i_bmcIP The IP address of the BMC
# @param i_bmcUser The userid to log into the BMC with
# @param i_bmcPasswd The password of the userid to log into the BMC with
# @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
# @param i_bmcPasswdIpmi The password of BMC IPMI userid
# @param i_ffdcDir Optional param to indicate where to write FFDC
#
# "Only required for inband tests" else Default = None
# @param i_hostIP The IP address of the HOST
# @param i_hostuser The userid to log into the HOST
# @param i_hostPasswd The password of the userid to log into the HOST with
#
def __init__(self,
i_bmcIP,
i_bmcUser,
i_bmcPasswd,
i_bmcUserIpmi,
i_bmcPasswdIpmi,
i_ffdcDir=None,
i_hostip=None,
i_hostuser=None,
i_hostPasswd=None):
self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
i_ffdcDir, i_hostip, i_hostuser,
i_hostPasswd)
self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP,
i_ffdcDir)
self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi,
i_ffdcDir, i_hostip, i_hostuser,
i_hostPasswd)
self.util = OpTestUtil()
self.user = i_hostuser
self.ip = i_hostip
self.passwd = i_hostPasswd
##
# @brief This function just brings the system to host OS.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def test_system_reboot(self):
print "Testing FWTS: Booting system to OS"
print "Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(
self.cv_SYSTEM.sys_wait_for_standby_state(
BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)
) == BMC_CONST.FW_SUCCESS:
print "System is in standby/Soft-off state"
else:
l_msg = "System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
self.cv_IPMI.clear_ssh_keys(self.cv_HOST.ip)
print "Gathering the OPAL msg logs"
self.cv_HOST.host_gather_opal_msg_log()
return BMC_CONST.FW_SUCCESS
##
# @brief This function just executes the fwts_execution.sh on host OS
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def test_fwts(self):
l_oslevel = self.cv_HOST.host_get_OS_Level()
if not "Ubuntu" in l_oslevel:
return
# Copy the fwts execution file to the tmp folder in the host
base_path = (os.path.dirname(
os.path.abspath(__file__))).split('testcases')[0]
fwts_script = base_path + "/testcases/fwts_execution.sh"
try:
self.util.copyFilesToDest(fwts_script, self.user, self.ip, "/tmp/",
self.passwd)
except:
l_msg = "Copying fwts file to host failed"
print l_msg
raise OpTestError(l_msg)
l_res = self.cv_HOST.host_run_command("/tmp/fwts_execution.sh")
print l_res
class OpTestFWTS():
## Initialize this object
# @param i_bmcIP The IP address of the BMC
# @param i_bmcUser The userid to log into the BMC with
# @param i_bmcPasswd The password of the userid to log into the BMC with
# @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
# @param i_bmcPasswdIpmi The password of BMC IPMI userid
# @param i_ffdcDir Optional param to indicate where to write FFDC
#
# "Only required for inband tests" else Default = None
# @param i_hostIP The IP address of the HOST
# @param i_hostuser The userid to log into the HOST
# @param i_hostPasswd The password of the userid to log into the HOST with
#
def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
i_hostuser=None, i_hostPasswd=None):
self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP, i_ffdcDir)
self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
i_hostuser, i_hostPasswd)
self.util = OpTestUtil()
self.user = i_hostuser
self.ip = i_hostip
self.passwd = i_hostPasswd
##
# @brief This function just brings the system to host OS.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def test_system_reboot(self):
print "Testing FWTS: Booting system to OS"
print "Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
print "System is in standby/Soft-off state"
else:
l_msg = "System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
self.cv_IPMI.clear_ssh_keys(self.cv_HOST.ip)
print "Gathering the OPAL msg logs"
self.cv_HOST.host_gather_opal_msg_log()
return BMC_CONST.FW_SUCCESS
##
# @brief This function just executes the fwts_execution.sh on host OS
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def test_fwts(self):
l_oslevel = self.cv_HOST.host_get_OS_Level()
if not "Ubuntu" in l_oslevel:
return
# Copy the fwts execution file to the tmp folder in the host
base_path = (os.path.dirname(os.path.abspath(__file__))).split('testcases')[0]
fwts_script = base_path + "/testcases/fwts_execution.sh"
try:
self.util.copyFilesToDest(fwts_script, self.user,
self.ip, "/tmp/", self.passwd)
except:
l_msg = "Copying fwts file to host failed"
print l_msg
raise OpTestError(l_msg)
l_res = self.cv_HOST.host_run_command("/tmp/fwts_execution.sh")
print l_res
class OpTestSystemBootSequence():
## Initialize this object
# @param i_bmcIP The IP address of the BMC
# @param i_bmcUser The userid to log into the BMC with
# @param i_bmcPasswd The password of the userid to log into the BMC with
# @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
# @param i_bmcPasswdIpmi The password of BMC IPMI userid
# @param i_ffdcDir Optional param to indicate where to write FFDC
#
# "Only required for inband tests" else Default = None
# @param i_hostip The IP address of the HOST
# @param i_hostuser The userid to log into the HOST
# @param i_hostpasswd The password of the userid to log into the HOST with
#
def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
i_hostuser=None, i_hostpasswd=None):
self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
i_ffdcDir, i_hostip, i_hostuser, i_hostpasswd)
self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostpasswd, i_bmcIP, i_ffdcDir)
self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
i_hostuser, i_hostpasswd)
self.util = OpTestUtil()
##
# @brief This function will test mc cold reset boot sequence
# It has below steps
# 1. Do a system Power OFF(Host should go down)
# 2. Set auto reboot policy to off(chassis policy always-off)
# 3. Issue a BMC Cold reset.
# 4. After BMC comes up, Issue a Power ON of the system
# 5. Check for system status and gather OPAL msg log.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def testMcColdResetBootSequence(self):
self.cv_SYSTEM.sys_bmc_power_on_validate_host()
print "Testing MC Cold reset boot sequence"
print "Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == 0:
print "System is in standby/Soft-off state"
else:
l_msg = "System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
print "Setting the system power policy to always-off"
self.cv_IPMI.ipmi_set_power_policy("always-off")
# Perform a BMC Cold Reset Operation
self.cv_IPMI.ipmi_cold_reset()
print "Performing a IPMI Power ON Operation"
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
self.cv_IPMI.clear_ssh_keys(self.cv_HOST.ip)
print "Gathering the OPAL msg logs"
self.cv_HOST.host_gather_opal_msg_log()
return BMC_CONST.FW_SUCCESS
##
# @brief This function will test mc warm reset boot sequence
# It has below steps
# 1. Do a system Power OFF(Host should go down)
# 2. Set auto reboot policy to off(chassis policy always-off)
# 3. Issue a BMC Warm reset.
# 4. After BMC comes up, Issue a Power ON of the system
# 5. Check for system status and gather OPAL msg log.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def testMcWarmResetBootSequence(self):
self.cv_SYSTEM.sys_bmc_power_on_validate_host()
print "Testing MC Warm reset boot sequence"
print "Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == 0:
print "System is in standby/Soft-off state"
else:
l_msg = "System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
print "Setting the system power policy to always-off"
self.cv_IPMI.ipmi_set_power_policy("always-off")
# Perform a BMC Warm Reset Operation
self.cv_IPMI.ipmi_warm_reset()
print "Performing a IPMI Power ON Operation"
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
self.cv_IPMI.clear_ssh_keys(self.cv_HOST.ip)
print "Gathering the OPAL msg logs"
self.cv_HOST.host_gather_opal_msg_log()
return BMC_CONST.FW_SUCCESS
##
# @brief This function will test system auto reboot policy always-off.
# It has below steps
# 1. Do a system Power OFF(Host should go down)
# 2. Set auto reboot policy to off(chassis policy always-off)
# 3. Issue a BMC Cold reset.
# 4. After BMC comes up, expect the system to not boot.
# 5. Issue a Power ON of the system
# 6. Check for system status and gather OPAL msg log.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def testSystemPowerPolicyOff(self):
self.cv_SYSTEM.sys_bmc_power_on_validate_host()
print "Testing System Power Policy:always-off"
print "Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
print "System is in standby/Soft-off state"
else:
l_msg = "System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
print "Setting the system power policy to always-off"
self.cv_IPMI.ipmi_set_power_policy("always-off")
# Perform a BMC Cold Reset Operation
if int(self.cv_SYSTEM.sys_cold_reset_bmc()) == BMC_CONST.FW_SUCCESS:
print "System auto reboot policy for always-off works as expected"
print "System Power status not changed"
print "Performing a IPMI Power ON Operation"
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
else:
print "Power restore policy failed"
l_msg = "Fail: chassis policy always-off making the system to auto boot"
print l_msg
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
self.cv_IPMI.clear_ssh_keys(self.cv_HOST.ip)
print "Gathering the OPAL msg logs"
self.cv_HOST.host_gather_opal_msg_log()
return BMC_CONST.FW_SUCCESS
##
# @brief This function will test system auto reboot policy always-on.
# It has below steps
# 1. Do a system Power OFF(Host should go down)
# 2. Set auto reboot policy to on(chassis policy always-on)
# 3. Issue a BMC Cold reset.
# 4. After BMC comes up, Here expect the system to boot,
# If not power policy is not working as expected
# 5. Check for system status and gather OPAL msg log.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def testSystemPowerPolicyOn(self):
self.cv_SYSTEM.sys_bmc_power_on_validate_host()
print "Testing System Power Policy:Always-ON"
print "Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
print "System is in standby/Soft-off state"
else:
l_msg = "System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
print "Setting the system power policy to always-on"
self.cv_IPMI.ipmi_set_power_policy("always-on")
# Perform a BMC Cold Reset Operation
if int(self.cv_SYSTEM.sys_cold_reset_bmc()) == BMC_CONST.FW_FAILED:
print "System auto reboot policy for always-on works as expected"
print "System Power status changed as expected"
else:
print "Power restore policy failed"
l_msg = "Fail: chassis policy always-on making the system not to auto boot"
print "Performing a IPMI Power ON Operation"
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
self.cv_IPMI.clear_ssh_keys(self.cv_HOST.ip)
print "Gathering the OPAL msg logs"
self.cv_HOST.host_gather_opal_msg_log()
return BMC_CONST.FW_SUCCESS
##
# @brief This function will test system auto reboot policy previous
# It has below steps
# 1. Do a system Power OFF(Host should go down)
# 2. Set auto reboot policy to previous(chassis policy previous)
# 3. Issue a BMC Cold reset.
# 4. After BMC comes up, system power status will change based on
# previous power status before issuing cold reset.
# 5. Check for system status and gather OPAL msg log.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def testSystemPowerPolicyPrevious(self):
self.cv_SYSTEM.sys_bmc_power_on_validate_host()
print "Testing System Power Policy:previous"
print "Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
print "System is in standby/Soft-off state"
else:
l_msg = "System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
print "Setting the system power policy to previous"
self.cv_IPMI.ipmi_set_power_policy("previous")
# Perform a BMC Cold Reset Operation
if int(self.cv_SYSTEM.sys_cold_reset_bmc()) == BMC_CONST.FW_SUCCESS:
print "System auto reboot policy for previous works as expected"
print "System Power status not changed"
print "Performing a IPMI Power ON Operation"
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
else:
print "Power restore policy failed"
l_msg = "Fail: chassis policy previous making the system to auto boot"
print l_msg
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
self.cv_IPMI.clear_ssh_keys(self.cv_HOST.ip)
print "Gathering the OPAL msg logs"
self.cv_HOST.host_gather_opal_msg_log()
# Perform a BMC Cold Reset Operation
if int(self.cv_SYSTEM.sys_cold_reset_bmc()) == BMC_CONST.FW_SUCCESS:
print "System auto reboot policy for previous works as expected"
print "System Power status not changed"
else:
print "Power restore policy previous failed"
l_msg = "Fail: chassis policy previous making the system to change power status"
print l_msg
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
self.cv_IPMI.clear_ssh_keys(self.cv_HOST.ip)
print "Gathering the OPAL msg logs"
self.cv_HOST.host_gather_opal_msg_log()
