def enroll(long_id, dev_type, customer_mid=0, customer_did=0):
serial_num = prutils.convert_longid(long_id)
rssi = "\x32"
tx_power = "\x01"
association_request_data = "\x00"
# TODO: Get device type
if dev_type.upper() in _DeviceType:
dev_type = _DeviceType[dev_type.upper()]
else:
raise Exception("Incorrect device type specified")
return None
attached_device_information = "\x00" + dev_type + "\x01\x14\x03\x00\x00"
# Counting customer id
manufacturing_information = chr(customer_mid) + prutils.num_to_chars(customer_did, 2, 0)
rf_module_information = "\x00\x70\x09\x28\x03\x08\x01"
packet = (
serial_num
+ rssi
+ tx_power
+ association_request_data
+ "\x00"
+ prutils.str_l(attached_device_information)
+ "\x01"
+ prutils.str_l(manufacturing_information)
+ "\x02"
+ prutils.str_l(rf_module_information)
)
host_protocol_message = prutils.make_host_packet(0x41, packet, False)
enroll_packet = "\x01" + host_protocol_message
enroll_packet = prutils._make_f2_packet(enroll_packet, 13)
return enroll_packet
def send_response(self, long_id, short_id, dpr_seq, mcode=0x06, state=0, notification_period=0):
#log.write('RESPONSE')
# state: 0 - OK, 1 .. see device protocol
# prepare device protocol
# mcode = 0x06
#print type(state)
state = chr(state)
seq = prutils.generate_seq("hpr")
ser_num = prutils.convert_longid(int(long_id))[:3]
mdata_value = chr(mcode) + chr(len(state)) + state
device_packet = '\x14\x00' + chr(dpr_seq) + ser_num + mdata_value
# prepare host protocol
#final_hop_info = '\x00' * 11
final_hop_info = '\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x00'
relaying_repeater_ID = 0
repeater_hop_info = '\x00' * 11
data = chr(short_id) + chr(seq) + chr(0x30 + notification_period) + final_hop_info + chr(relaying_repeater_ID)\
+ repeater_hop_info + prutils.str_l(device_packet)
cmd = 0x30
data = chr(cmd) + data
cmd_l = 2 + len(data)
data = chr(cmd_l) + data
host_protocol_message = data + prutils.crc16(data)[0] + '\x0A'
packet = prutils._make_f2_packet( host_protocol_message )
#self._Procedures._Communicator.add_to_queue(packet, 0, 5)
self._Communicator.send(packet)
def enroll(long_id, dev_type, customer_mid=0, customer_did=0):
serial_num = prutils.convert_longid(long_id)
rssi = '\x32'
tx_power = '\x01'
association_request_data = '\x00'
#TODO: Get device type
if (dev_type.upper() in _DeviceType):
dev_type = _DeviceType[dev_type.upper()]
else:
raise Exception("Incorrect device type specified")
return None
attached_device_information = '\x00' + dev_type + '\x01\x14\x03\x00\x00'
#Counting customer id
manufacturing_information = chr(customer_mid) + prutils.num_to_chars(
customer_did, 2, 0)
rf_module_information = '\x00\x70\x09\x28\x03\x08\x01'
packet = serial_num + rssi + tx_power + association_request_data + '\x00' + prutils.str_l(
attached_device_information) + '\x01' + prutils.str_l(
manufacturing_information) + '\x02' + prutils.str_l(
rf_module_information)
host_protocol_message = prutils.make_host_packet(0x41, packet, False)
enroll_packet = '\x01' + host_protocol_message
enroll_packet = prutils._make_f2_packet(enroll_packet, 13)
return enroll_packet
def send_hello(self, seq=0xFF, notification_period=0):
log.write('** hello from [%d:%d] **' % (self._short_id, self._long_id))
self._Procedures.hello(self._long_id, self._short_id, 0, notification_period)
return
ser_num = prutils.convert_longid(int(self._long_id))[:3]
mcode = 5
mdata_type = 64
mdata_value = chr(0)
if seq == 0xFF:
seq = self._dpr_seq.next()
mdata = chr(mcode) + prutils.str_l( chr(mdata_type) + prutils.str_l(mdata_value) )
device_packet = '\xE4\x00' + chr(seq) + ser_num + mdata
# prepare host protocol
#final_hop_info = '\x00' * 11
final_hop_info = '\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x00'
relaying_repeater_ID = 0
repeater_hop_info = '\x00' * 11
#data = chr(short_id) + '\x01\xF8' + final_hop_info + chr(relaying_repeater_ID) + repeater_hop_info + str_l(device_packet)
data = chr(self._short_id) + chr(prutils.generate_seq('hpr')) + chr(0x30 + notification_period) + final_hop_info + chr(relaying_repeater_ID) + repeater_hop_info + prutils.str_l(device_packet)
cmd = 0x30
data = chr(cmd) + data
cmd_l = 2 + len(data)
data = chr(cmd_l) + data
host_protocol_message = data + prutils.crc16(data)[0] + '\x0A'
#TODO: Use "make_host_packet" function to create device packet
#host_protocol_message = make_host_packet( 0x30, data)
#preparing packet to send
#print hexdump(host_protocol_message)
packet = host_protocol_message
packet = prutils._make_f2_packet( host_protocol_message )
# self.prepare_transmitter()
self._Procedures._Communicator.send(packet, 9)
def send_response(self,
long_id,
short_id,
dpr_seq,
mcode=0x06,
state=0,
notification_period=0):
#log.write('RESPONSE')
# state: 0 - OK, 1 .. see device protocol
# prepare device protocol
# mcode = 0x06
#print type(state)
state = chr(state)
seq = prutils.generate_seq("hpr")
ser_num = prutils.convert_longid(int(long_id))[:3]
mdata_value = chr(mcode) + chr(len(state)) + state
device_packet = '\x14\x00' + chr(dpr_seq) + ser_num + mdata_value
# prepare host protocol
#final_hop_info = '\x00' * 11
final_hop_info = '\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x00'
relaying_repeater_ID = 0
repeater_hop_info = '\x00' * 11
data = chr(short_id) + chr(seq) + chr(0x30 + notification_period) + final_hop_info + chr(relaying_repeater_ID)\
+ repeater_hop_info + prutils.str_l(device_packet)
cmd = 0x30
data = chr(cmd) + data
cmd_l = 2 + len(data)
data = chr(cmd_l) + data
host_protocol_message = data + prutils.crc16(data)[0] + '\x0A'
packet = prutils._make_f2_packet(host_protocol_message)
#self._Procedures._Communicator.add_to_queue(packet, 0, 5)
self._Communicator.send(packet)
def send_response(self, mcode, seq=0xFF, amount=1, notification_period=0, state=0, return_packet=False):
if(mcode == 0x06):
log.write('** response from [%d:%d] **' % (self._short_id, self._long_id))
elif(mcode == 0x07):
log.write('** confirm from [%d:%d] **' % (self._short_id, self._long_id))
if amount > 1:
log.write("--multiply--: %d" % amount)
# state: 0 - OK, 1 .. see device protocol
# prepare device protocol
#print type(state)
state = chr(state)
if seq == 0xFF:
seq = self._dpr_seq.next()
ser_num = prutils.convert_longid(int(self._long_id))[:3]
mdata_value = ''
# mdata_value = chr(mcode) + chr(len(state)) + state
for i in range(amount):
mdata_value += chr(len(state)) + state
mdata_value = chr(mcode) + mdata_value
device_packet = '\x14\x00' + chr(seq) + ser_num + mdata_value
# prepare host protocol
#final_hop_info = '\x00' * 11
final_hop_info = '\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x00'
relaying_repeater_ID = 0
repeater_hop_info = '\x00' * 11
data = chr(self._short_id) + chr(prutils.generate_seq("hpr")) + chr(0x30 + notification_period) + final_hop_info + chr(relaying_repeater_ID)\
+ repeater_hop_info + prutils.str_l(device_packet)
cmd = 0x30
data = chr(cmd) + data
cmd_l = 2 + len(data)
data = chr(cmd_l) + data
host_protocol_message = data + prutils.crc16(data)[0] + '\x0A'
packet = prutils._make_f2_packet( host_protocol_message )
#self._Procedures._Communicator.add_to_queue(packet, 0, 5)
if return_packet == False:
# self.prepare_transmitter()
self._Procedures._Communicator.send(packet)
else:
return packet
def auto_cmd(self, cmd, data):
data = prutils.num_to_chars(data)
packet = prutils._make_f2_packet(data, cmd)
self._Communicator.send(packet)
def auto_cmd(self, cmd, data):
data = prutils.num_to_chars(data)
packet = prutils._make_f2_packet(data, cmd)
self._Communicator.send(packet)