def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": _("CVBS")} # when YUV, Scart or S-Video is not support by HW, don't let the user select it if SystemInfo["HasYPbPr"]: colorformat_choices["yuv"] = _("YPbPr") if SystemInfo["HasScart"]: colorformat_choices["rgb"] = _("RGB") if SystemInfo["HasSVideo"]: colorformat_choices["svideo"] = _("S-Video") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "full" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy2_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "nonlinear" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) policy_choices.update({"nonlinear": _("Nonlinear")}) except: pass try: if "full" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) try: SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False except: SystemInfo["CanChangeOsdAlpha"] = False if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) if SystemInfo["HasMultichannelPCM"]: def setMultichannelPCM(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.multichannel_pcm = ConfigYesNo(default=False) config.av.multichannel_pcm.addNotifier(setMultichannelPCM) if SystemInfo["HasAutoVolume"]: def setAutoVolume(configElement): open(SystemInfo["HasAutoVolume"], "w").write(configElement.value) config.av.autovolume = ConfigSelection(default="none", choices=[("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.autovolume.addNotifier(setAutoVolume) if SystemInfo["HasAutoVolumeLevel"]: def setAutoVolumeLevel(configElement): open(SystemInfo["HasAutoVolumeLevel"], "w").write(configElement.value and "enabled" or "disabled") config.av.autovolumelevel = ConfigYesNo(default=False) config.av.autovolumelevel.addNotifier(setAutoVolumeLevel) if SystemInfo["Has3DSurround"]: def set3DSurround(configElement): open(SystemInfo["Has3DSurround"], "w").write(configElement.value) config.av.surround_3d = ConfigSelection(default="none", choices=[("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["Has3DSpeaker"]: def set3DSpeaker(configElement): open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value) config.av.speaker_3d = ConfigSelection(default="center", choices=[("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.speaker_3d.addNotifier(set3DSpeaker) if SystemInfo["Has3DSurroundSpeaker"]: def set3DSurroundSpeaker(configElement): open(SystemInfo["Has3DSurroundSpeaker"], "w").write(configElement.value) config.av.surround_3d_speaker = ConfigSelection( default="disabled", choices=[("disabled", _("off")), ("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) if SystemInfo["Has3DSurroundSoftLimiter"]: def set3DSurroundSoftLimiter(configElement): open(SystemInfo["Has3DSurroundSoftLimiter"], "w").write(configElement.value and "enabled" or "disabled") config.av.surround_softlimiter_3d = ConfigYesNo(default=False) config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter) if SystemInfo["HDMIAudioSource"]: def setHDMIAudioSource(configElement): open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value) config.av.hdmi_audio_source = ConfigSelection(default="pcm", choices=[ ("pcm", _("PCM")), ("spdif", _("SPDIF")) ]) config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource) def setVolumeStepsize(configElement): eDVBVolumecontrol.getInstance().setVolumeSteps(int( configElement.value)) config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5) config.av.volume_stepsize.addNotifier(setVolumeStepsize)
def InitUsageConfig(): config.usage = ConfigSubsection() config.usage.showdish = ConfigYesNo(default=True) config.misc.showrotorposition = ConfigSelection( default='no', choices=[('no', _('no')), ('yes', _('yes')), ('withtext', _('with text')), ('tunername', _('with tuner name'))]) config.usage.multibouquet = ConfigYesNo(default=True) config.usage.alternative_number_mode = ConfigYesNo(default=False) def alternativeNumberModeChange(configElement): eDVBDB.getInstance().setNumberingMode(configElement.value) refreshServiceList() config.usage.alternative_number_mode.addNotifier( alternativeNumberModeChange) config.usage.hide_number_markers = ConfigYesNo(default=True) config.usage.hide_number_markers.addNotifier(refreshServiceList) config.usage.servicetype_icon_mode = ConfigSelection( default='0', choices=[('0', _('None')), ('1', _('Left from servicename')), ('2', _('Right from servicename'))]) config.usage.servicetype_icon_mode.addNotifier(refreshServiceList) config.usage.crypto_icon_mode = ConfigSelection( default='0', choices=[('0', _('None')), ('1', _('Left from servicename')), ('2', _('Right from servicename'))]) config.usage.crypto_icon_mode.addNotifier(refreshServiceList) config.usage.record_indicator_mode = ConfigSelection( default='0', choices=[('0', _('None')), ('1', _('Left from servicename')), ('2', _('Right from servicename')), ('3', _('Red colored'))]) config.usage.record_indicator_mode.addNotifier(refreshServiceList) choicelist = [('-1', _('Disable'))] for i in range(0, 1300, 100): choicelist.append( ('%d' % i, ngettext('%d pixel wide', '%d pixels wide', i) % i)) config.usage.servicelist_column = ConfigSelection(default='-1', choices=choicelist) config.usage.servicelist_column.addNotifier(refreshServiceList) config.usage.service_icon_enable = ConfigYesNo(default=True) config.usage.service_icon_enable.addNotifier(refreshServiceList) config.usage.servicelist_cursor_behavior = ConfigSelection( default='standard', choices=[('standard', _('Standard')), ('keep', _('Keep service')), ('reverseB', _('Reverse bouquet buttons')), ('keep reverseB', _('Keep service') + ' + ' + _('Reverse bouquet buttons'))]) config.usage.multiepg_ask_bouquet = ConfigYesNo(default=False) config.usage.quickzap_bouquet_change = ConfigYesNo(default=False) config.usage.e1like_radio_mode = ConfigYesNo(default=True) choicelist = [('0', _('No timeout'))] for i in range(1, 12): choicelist.append( ('%d' % i, ngettext('%d second', '%d seconds', i) % i)) config.usage.infobar_timeout = ConfigSelection(default='5', choices=choicelist) config.usage.show_infobar_on_zap = ConfigYesNo(default=True) config.usage.show_infobar_on_skip = ConfigYesNo(default=True) config.usage.show_infobar_on_event_change = ConfigYesNo(default=False) config.usage.show_second_infobar = ConfigSelection( default='5', choices=[(None, _('None'))] + choicelist + [('EPG', _('EPG'))]) config.usage.infobar_frontend_source = ConfigSelection( default='tuner', choices=[('settings', _('Settings')), ('tuner', _('Tuner'))]) config.usage.oldstyle_zap_controls = ConfigYesNo(default=False) config.usage.oldstyle_channel_select_controls = ConfigYesNo(default=False) config.usage.zap_with_ch_buttons = ConfigYesNo(default=False) config.usage.ok_is_channelselection = ConfigYesNo(default=False) config.usage.volume_instead_of_channelselection = ConfigYesNo( default=False) config.usage.channelselection_preview = ConfigYesNo(default=False) config.usage.show_spinner = ConfigYesNo(default=True) config.usage.enable_tt_caching = ConfigYesNo(default=True) choicelist = [] for i in (10, 30): choicelist.append( ('%d' % i, ngettext('%d second', '%d seconds', i) % i)) for i in (60, 120, 300, 600, 1200, 1800): m = i / 60 choicelist.append( ('%d' % i, ngettext('%d minute', '%d minutes', m) % m)) for i in (3600, 7200, 14400): h = i / 3600 choicelist.append(('%d' % i, ngettext('%d hour', '%d hours', h) % h)) config.usage.hdd_standby = ConfigSelection( default='300', choices=[('0', _('No standby'))] + choicelist) config.usage.output_12V = ConfigSelection(default='do not change', choices=[('do not change', _('Do not change')), ('off', _('Off')), ('on', _('On'))]) config.usage.pip_zero_button = ConfigSelection( default='standard', choices=[('standard', _('Standard')), ('swap', _('Swap PiP and main picture')), ('swapstop', _('Move PiP to main picture')), ('stop', _('Stop PiP'))]) config.usage.pip_hideOnExit = ConfigSelection(default='without popup', choices=[('no', _('No')), ('popup', _('With popup')), ('without popup', _('Without popup')) ]) choicelist = [('-1', _('Disabled')), ('0', _('No timeout'))] for i in [60, 300, 600, 900, 1800, 2700, 3600]: m = i / 60 choicelist.append( ('%d' % i, ngettext('%d minute', '%d minutes', m) % m)) config.usage.pip_last_service_timeout = ConfigSelection(default='0', choices=choicelist) config.usage.default_path = ConfigText(default=resolveFilename(SCOPE_HDD)) config.usage.timer_path = ConfigText(default='<default>') config.usage.instantrec_path = ConfigText(default='<default>') config.usage.timeshift_path = ConfigText(default='/media/hdd/') config.usage.allowed_timeshift_paths = ConfigLocations( default=['/media/hdd/']) config.usage.movielist_trashcan = ConfigYesNo(default=True) config.usage.movielist_trashcan_days = ConfigNumber(default=8) config.usage.movielist_trashcan_reserve = ConfigNumber(default=40) config.usage.on_movie_start = ConfigSelection( default='resume', choices=[ ('ask yes', _('Ask user') + ' ' + _('default') + ' ' + _('yes')), ('ask no', _('Ask user') + ' ' + _('default') + ' ' + _('no')), ('resume', _('Resume from last position')), ('beginning', _('Start from the beginning')) ]) config.usage.on_movie_stop = ConfigSelection( default='movielist', choices=[('ask', _('Ask user')), ('movielist', _('Return to movie list')), ('quit', _('Return to previous service'))]) config.usage.on_movie_eof = ConfigSelection( default='movielist', choices=[('ask', _('Ask user')), ('movielist', _('Return to movie list')), ('quit', _('Return to previous service')), ('pause', _('Pause movie at end')), ('playlist', _('Play next (return to movie list)')), ('playlistquit', _('Play next (return to previous service)')), ('loop', _('Continues play (loop)')), ('repeatcurrent', _('Repeat'))]) config.usage.next_movie_msg = ConfigYesNo(default=True) config.usage.last_movie_played = ConfigText() config.usage.leave_movieplayer_onExit = ConfigSelection( default='popup', choices=[('no', _('No')), ('popup', _('With popup')), ('without popup', _('Without popup'))]) config.usage.setup_level = ConfigSelection(default='expert', choices=[ ('simple', _('Simple')), ('intermediate', _('Intermediate')), ('expert', _('Expert')) ]) config.usage.startup_to_standby = ConfigYesNo(default=False) config.usage.on_long_powerpress = ConfigSelection( default='show_menu', choices=[('show_menu', _('Show shutdown menu')), ('shutdown', _('Immediate shutdown')), ('standby', _('Standby'))]) config.usage.on_short_powerpress = ConfigSelection( default='standby', choices=[('show_menu', _('Show shutdown menu')), ('shutdown', _('Immediate shutdown')), ('standby', _('Standby'))]) choicelist = [('0', _('Do nothing'))] for i in range(3600, 21601, 3600): h = abs(i / 3600) h = ngettext('%d hour', '%d hours', h) % h choicelist.append(('%d' % i, _('Standby in ') + h)) config.usage.inactivity_timer = ConfigSelection(default='0', choices=choicelist) config.usage.inactivity_timer_blocktime = ConfigYesNo(default=True) config.usage.inactivity_timer_blocktime_begin = ConfigClock( default=time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end = ConfigClock( default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default=False) config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock( default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end = ConfigClock( default=time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) choicelist = [('0', _('Disabled')), ('event_standby', _('Standby after current event'))] for i in range(900, 7201, 900): m = abs(i / 60) m = ngettext('%d minute', '%d minutes', m) % m choicelist.append(('%d' % i, _('Standby in ') + m)) config.usage.sleep_timer = ConfigSelection(default='0', choices=choicelist) choicelist = [('0', _('Disabled'))] for i in [60, 300, 600] + range(900, 7201, 900): m = abs(i / 60) m = ngettext('%d minute', '%d minutes', m) % m choicelist.append(('%d' % i, _('after ') + m)) config.usage.standby_to_shutdown_timer = ConfigSelection( default='0', choices=choicelist) config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo( default=True) config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock( default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock( default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) choicelist = [('0', _('Disabled'))] for i in (5, 30, 60, 300, 600, 900, 1200, 1800, 2700, 3600): if i < 60: m = ngettext('%d second', '%d seconds', i) % i else: m = abs(i / 60) m = ngettext('%d minute', '%d minutes', m) % m choicelist.append(('%d' % i, m)) config.usage.screen_saver = ConfigSelection(default='60', choices=choicelist) config.usage.check_timeshift = ConfigYesNo(default=True) choicelist = [('0', _('Disabled'))] for i in (2, 3, 4, 5, 10, 20, 30): choicelist.append( ('%d' % i, ngettext('%d second', '%d seconds', i) % i)) for i in (60, 120, 300): m = i / 60 choicelist.append( ('%d' % i, ngettext('%d minute', '%d minutes', m) % m)) config.usage.timeshift_start_delay = ConfigSelection(default='0', choices=choicelist) config.usage.alternatives_priority = ConfigSelection( default='0', choices=[('0', 'DVB-S/-C/-T'), ('1', 'DVB-S/-T/-C'), ('2', 'DVB-C/-S/-T'), ('3', 'DVB-C/-T/-S'), ('4', 'DVB-T/-C/-S'), ('5', 'DVB-T/-S/-C'), ('127', _('No priority'))]) config.usage.remote_fallback_enabled = ConfigYesNo(default=False) config.usage.remote_fallback = ConfigText(default='', fixed_size=False) nims = [('-1', _('auto'))] for x in nimmanager.nim_slots: nims.append((str(x.slot), x.getSlotName())) config.usage.frontend_priority = ConfigSelection(default='-1', choices=list(nims)) nims.insert(0, ('-2', _('Disabled'))) config.usage.recording_frontend_priority = ConfigSelection(default='-2', choices=nims) config.misc.disable_background_scan = ConfigYesNo(default=False) config.usage.show_event_progress_in_servicelist = ConfigSelection( default='barright', choices=[('barleft', _('Progress bar left')), ('barright', _('Progress bar right')), ('percleft', _('Percentage left')), ('percright', _('Percentage right')), ('no', _('No'))]) config.usage.show_channel_numbers_in_servicelist = ConfigYesNo( default=True) config.usage.show_event_progress_in_servicelist.addNotifier( refreshServiceList) config.usage.show_channel_numbers_in_servicelist.addNotifier( refreshServiceList) config.usage.blinking_display_clock_during_recording = ConfigYesNo( default=False) config.usage.show_message_when_recording_starts = ConfigYesNo(default=True) config.usage.load_length_of_movies_in_moviellist = ConfigYesNo( default=True) config.usage.show_icons_in_movielist = ConfigSelection( default='i', choices=[('o', _('Off')), ('p', _('Progress')), ('s', _('Small progress')), ('i', _('Icons'))]) config.usage.movielist_unseen = ConfigYesNo(default=False) config.usage.swap_snr_on_osd = ConfigYesNo(default=False) def SpinnerOnOffChanged(configElement): setSpinnerOnOff(int(configElement.value)) config.usage.show_spinner.addNotifier(SpinnerOnOffChanged) def EnableTtCachingChanged(configElement): setEnableTtCachingOnOff(int(configElement.value)) config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged) def TunerTypePriorityOrderChanged(configElement): setTunerTypePriorityOrder(int(configElement.value)) config.usage.alternatives_priority.addNotifier( TunerTypePriorityOrderChanged, immediate_feedback=False) def PreferredTunerChanged(configElement): setPreferredTuner(int(configElement.value)) config.usage.frontend_priority.addNotifier(PreferredTunerChanged) config.usage.hide_zap_errors = ConfigYesNo(default=False) config.usage.hide_ci_messages = ConfigYesNo(default=True) config.usage.show_cryptoinfo = ConfigYesNo(default=True) config.usage.show_eit_nownext = ConfigYesNo(default=True) config.usage.show_vcr_scart = ConfigYesNo(default=False) config.usage.show_update_disclaimer = ConfigYesNo(default=True) config.usage.pic_resolution = ConfigSelection( default=None, choices=[(None, _('Same resolution as skin')), ('(720, 576)', '720x576'), ('(1280, 720)', '1280x720'), ('(1920, 1080)', '1920x1080')]) if SystemInfo['Fan']: choicelist = [('off', _('Off')), ('on', _('On')), ('auto', _('Auto'))] if os.path.exists('/proc/stb/fp/fan_choices'): choicelist = [ x for x in choicelist if x[0] in open( '/proc/stb/fp/fan_choices', 'r').read().strip().split(' ') ] config.usage.fan = ConfigSelection(choicelist) def fanChanged(configElement): open(SystemInfo['Fan'], 'w').write(configElement.value) config.usage.fan.addNotifier(fanChanged) if SystemInfo['FanPWM']: def fanSpeedChanged(configElement): open(SystemInfo['FanPWM'], 'w').write(hex(configElement.value)[2:]) config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255)) config.usage.fanspeed.addNotifier(fanSpeedChanged) if SystemInfo['StandbyLED']: def standbyLEDChanged(configElement): open(SystemInfo['StandbyLED'], 'w').write(configElement.value and 'on' or 'off') config.usage.standbyLED = ConfigYesNo(default=True) config.usage.standbyLED.addNotifier(standbyLEDChanged) if SystemInfo['WakeOnLAN']: def wakeOnLANChanged(configElement): if 'fp' in SystemInfo['WakeOnLAN']: open(SystemInfo['WakeOnLAN'], 'w').write(configElement.value and 'enable' or 'disable') else: open(SystemInfo['WakeOnLAN'], 'w').write(configElement.value and 'on' or 'off') config.usage.wakeOnLAN = ConfigYesNo(default=False) config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged) config.epg = ConfigSubsection() config.epg.eit = ConfigYesNo(default=True) config.epg.mhw = ConfigYesNo(default=False) config.epg.freesat = ConfigYesNo(default=True) config.epg.viasat = ConfigYesNo(default=True) config.epg.netmed = ConfigYesNo(default=True) config.epg.virgin = ConfigYesNo(default=False) config.misc.showradiopic = ConfigYesNo(default=True) def EpgSettingsChanged(configElement): from enigma import eEPGCache mask = 4294967295L if not config.epg.eit.value: mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER) if not config.epg.mhw.value: mask &= ~eEPGCache.MHW if not config.epg.freesat.value: mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER) if not config.epg.viasat.value: mask &= ~eEPGCache.VIASAT if not config.epg.netmed.value: mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER) if not config.epg.virgin.value: mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE) eEPGCache.getInstance().setEpgSources(mask) config.epg.eit.addNotifier(EpgSettingsChanged) config.epg.mhw.addNotifier(EpgSettingsChanged) config.epg.freesat.addNotifier(EpgSettingsChanged) config.epg.viasat.addNotifier(EpgSettingsChanged) config.epg.netmed.addNotifier(EpgSettingsChanged) config.epg.virgin.addNotifier(EpgSettingsChanged) config.epg.histminutes = ConfigSelectionNumber(min=0, max=120, stepwidth=15, default=0, wraparound=True) def EpgHistorySecondsChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgHistorySeconds( config.epg.histminutes.getValue() * 60) config.epg.histminutes.addNotifier(EpgHistorySecondsChanged) def setHDDStandby(configElement): for hdd in harddiskmanager.HDDList(): hdd[1].setIdleTime(int(configElement.value)) config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False) if SystemInfo['12V_Output']: def set12VOutput(configElement): Misc_Options.getInstance().set_12V_output( configElement.value == 'on' and 1 or 0) config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False) config.usage.keymap = ConfigText( default=eEnv.resolve('${datadir}/enigma2/keymap.xml')) config.seek = ConfigSubsection() config.seek.selfdefined_13 = ConfigNumber(default=15) config.seek.selfdefined_46 = ConfigNumber(default=60) config.seek.selfdefined_79 = ConfigNumber(default=300) config.seek.speeds_forward = ConfigSet( default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_backward = ConfigSet( default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25]) config.seek.enter_forward = ConfigSelection(default='2', choices=[ '2', '4', '6', '8', '12', '16', '24', '32', '48', '64', '96', '128' ]) config.seek.enter_backward = ConfigSelection(default='1', choices=[ '1', '2', '4', '6', '8', '12', '16', '24', '32', '48', '64', '96', '128' ]) config.seek.on_pause = ConfigSelection(default='play', choices=[('play', _('Play')), ('step', _('Single step (GOP)')), ('last', _('Last speed'))]) config.usage.timerlist_finished_timer_position = ConfigSelection( default='end', choices=[('beginning', _('At beginning')), ('end', _('At end'))]) def updateEnterForward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_forward, configElement.value) config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback=False) def updateEnterBackward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_backward, configElement.value) config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback=False) def updateEraseSpeed(el): eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value)) def updateEraseFlags(el): eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value)) config.misc.erase_speed = ConfigSelection(default='20', choices=[('10', '10 MB/s'), ('20', '20 MB/s'), ('50', '50 MB/s'), ('100', '100 MB/s')]) config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback=False) config.misc.erase_flags = ConfigSelection(default='1', choices=[ ('0', _('Disable')), ('1', _('Internal hdd only')), ('3', _('Everywhere')) ]) config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback=False) if SystemInfo['ZapMode']: def setZapmode(el): open(SystemInfo['ZapMode'], 'w').write(el.value) config.misc.zapmode = ConfigSelection( default='mute', choices=[('mute', _('Black screen')), ('hold', _('Hold screen')), ('mutetilllock', _('Black screen till locked')), ('holdtilllock', _('Hold till locked'))]) config.misc.zapmode.addNotifier(setZapmode, immediate_feedback=False) if SystemInfo['VFD_scroll_repeats']: def scroll_repeats(el): open(SystemInfo['VFD_scroll_repeats'], 'w').write(el.value) choicelist = [] for i in range(1, 11, 1): choicelist.append('%d' % i) config.usage.vfd_scroll_repeats = ConfigSelection(default='3', choices=choicelist) config.usage.vfd_scroll_repeats.addNotifier(scroll_repeats, immediate_feedback=False) if SystemInfo['VFD_scroll_delay']: def scroll_delay(el): open(SystemInfo['VFD_scroll_delay'], 'w').write(el.value) choicelist = [] for i in range(0, 1001, 50): choicelist.append('%d' % i) config.usage.vfd_scroll_delay = ConfigSelection(default='150', choices=choicelist) config.usage.vfd_scroll_delay.addNotifier(scroll_delay, immediate_feedback=False) if SystemInfo['VFD_initial_scroll_delay']: def initial_scroll_delay(el): open(SystemInfo['VFD_initial_scroll_delay'], 'w').write(el.value) choicelist = [] for i in range(0, 20001, 500): choicelist.append('%d' % i) config.usage.vfd_initial_scroll_delay = ConfigSelection( default='1000', choices=choicelist) config.usage.vfd_initial_scroll_delay.addNotifier( initial_scroll_delay, immediate_feedback=False) if SystemInfo['VFD_final_scroll_delay']: def final_scroll_delay(el): open(SystemInfo['VFD_final_scroll_delay'], 'w').write(el.value) choicelist = [] for i in range(0, 20001, 500): choicelist.append('%d' % i) config.usage.vfd_final_scroll_delay = ConfigSelection( default='1000', choices=choicelist) config.usage.vfd_final_scroll_delay.addNotifier( final_scroll_delay, immediate_feedback=False) config.subtitles = ConfigSubsection() config.subtitles.ttx_subtitle_colors = ConfigSelection( default='1', choices=[('0', _('original')), ('1', _('white')), ('2', _('yellow'))]) config.subtitles.ttx_subtitle_original_position = ConfigYesNo( default=False) config.subtitles.subtitle_position = ConfigSelection(choices=[ '0', '10', '20', '30', '40', '50', '60', '70', '80', '90', '100', '150', '200', '250', '300', '350', '400', '450' ], default='50') config.subtitles.subtitle_alignment = ConfigSelection(choices=[ ('left', _('left')), ('center', _('center')), ('right', _('right')) ], default='center') config.subtitles.subtitle_rewrap = ConfigYesNo(default=False) config.subtitles.colourise_dialogs = ConfigYesNo(default=False) config.subtitles.subtitle_borderwidth = ConfigSelection( choices=['1', '2', '3', '4', '5'], default='3') config.subtitles.subtitle_fontsize = ConfigSelection( choices=['%d' % x for x in range(16, 101) if not x % 2], default='40') subtitle_delay_choicelist = [] for i in range(-900000, 1845000, 45000): if i == 0: subtitle_delay_choicelist.append(('0', _('No delay'))) else: subtitle_delay_choicelist.append( ('%d' % i, '%2.1f sec' % (i / 90000.0))) config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection( default='315000', choices=subtitle_delay_choicelist) config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default=False) config.subtitles.dvb_subtitles_original_position = ConfigSelection( default='0', choices=[('0', _('Original')), ('1', _('Fixed')), ('2', _('Relative'))]) config.subtitles.dvb_subtitles_centered = ConfigYesNo(default=True) config.subtitles.subtitle_bad_timing_delay = ConfigSelection( default='0', choices=subtitle_delay_choicelist) config.subtitles.dvb_subtitles_backtrans = ConfigSelection( default='0', choices=[('0', _('No transparency')), ('25', '10%'), ('50', '20%'), ('75', '30%'), ('100', '40%'), ('125', '50%'), ('150', '60%'), ('175', '70%'), ('200', '80%'), ('225', '90%'), ('255', _('Full transparency'))]) config.subtitles.pango_subtitle_colors = ConfigSelection( default='1', choices=[('0', _('alternative')), ('1', _('white')), ('2', _('yellow'))]) config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default=True) config.subtitles.pango_subtitles_delay = ConfigSelection( default='0', choices=subtitle_delay_choicelist) config.subtitles.pango_subtitles_fps = ConfigSelection( default='1', choices=[('1', _('Original')), ('23976', _('23.976')), ('24000', _('24')), ('25000', _('25')), ('29970', _('29.97')), ('30000', _('30'))]) config.subtitles.pango_autoturnon = ConfigYesNo(default=True) config.autolanguage = ConfigSubsection() audio_language_choices = [ ('---', _('None')), ('orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ', _('Original')), ('ara', _('Arabic')), ('eus baq', _('Basque')), ('bul', _('Bulgarian')), ('hrv', _('Croatian')), ('ces cze', _('Czech')), ('dan', _('Danish')), ('dut ndl', _('Dutch')), ('eng qaa', _('English')), ('est', _('Estonian')), ('fin', _('Finnish')), ('fra fre', _('French')), ('deu ger', _('German')), ('ell gre', _('Greek')), ('heb', _('Hebrew')), ('hun', _('Hungarian')), ('ita', _('Italian')), ('lav', _('Latvian')), ('lit', _('Lithuanian')), ('ltz', _('Luxembourgish')), ('nor', _('Norwegian')), ('pol', _('Polish')), ('por', _('Portuguese')), ('fas per', _('Persian')), ('ron rum', _('Romanian')), ('rus', _('Russian')), ('srp', _('Serbian')), ('slk slo', _('Slovak')), ('slv', _('Slovenian')), ('spa', _('Spanish')), ('swe', _('Swedish')), ('tha', _('Thai')), ('tur Audio_TUR', _('Turkish')), ('ukr Ukr', _('Ukrainian')) ] def setEpgLanguage(configElement): eServiceEvent.setEPGLanguage(configElement.value) config.autolanguage.audio_epglanguage = ConfigSelection( audio_language_choices[:1] + audio_language_choices[2:], default='---') config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage) def setEpgLanguageAlternative(configElement): eServiceEvent.setEPGLanguageAlternative(configElement.value) config.autolanguage.audio_epglanguage_alternative = ConfigSelection( audio_language_choices[:1] + audio_language_choices[2:], default='---') config.autolanguage.audio_epglanguage_alternative.addNotifier( setEpgLanguageAlternative) config.autolanguage.audio_autoselect1 = ConfigSelection( choices=audio_language_choices, default='---') config.autolanguage.audio_autoselect2 = ConfigSelection( choices=audio_language_choices, default='---') config.autolanguage.audio_autoselect3 = ConfigSelection( choices=audio_language_choices, default='---') config.autolanguage.audio_autoselect4 = ConfigSelection( choices=audio_language_choices, default='---') config.autolanguage.audio_defaultac3 = ConfigYesNo(default=False) config.autolanguage.audio_defaultddp = ConfigYesNo(default=False) config.autolanguage.audio_usecache = ConfigYesNo(default=True) subtitle_language_choices = audio_language_choices[: 1] + audio_language_choices[ 2:] config.autolanguage.subtitle_autoselect1 = ConfigSelection( choices=subtitle_language_choices, default='---') config.autolanguage.subtitle_autoselect2 = ConfigSelection( choices=subtitle_language_choices, default='---') config.autolanguage.subtitle_autoselect3 = ConfigSelection( choices=subtitle_language_choices, default='---') config.autolanguage.subtitle_autoselect4 = ConfigSelection( choices=subtitle_language_choices, default='---') config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default=False) config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default=False) config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default=False) config.autolanguage.subtitle_usecache = ConfigYesNo(default=True) config.autolanguage.equal_languages = ConfigSelection(default='15', choices=[ ('0', _('None')), ('1', '1'), ('2', '2'), ('3', '1,2'), ('4', '3'), ('5', '1,3'), ('6', '2,3'), ('7', '1,2,3'), ('8', '4'), ('9', '1,4'), ('10', '2,4'), ('11', '1,2,4'), ('12', '3,4'), ('13', '1,3,4'), ('14', '2,3,4'), ('15', _('All')) ]) config.streaming = ConfigSubsection() config.streaming.stream_ecm = ConfigYesNo(default=False) config.streaming.descramble = ConfigYesNo(default=True) config.streaming.stream_eit = ConfigYesNo(default=True) config.streaming.stream_ait = ConfigYesNo(default=True) config.streaming.authentication = ConfigYesNo(default=False) return
def InitUsageConfig(): config.misc.useNTPminutes = ConfigSelection(default = "30", choices = [("30", "30" + " " +_("minutes")), ("60", _("Hour")), ("1440", _("Once per day"))]) if getBrandOEM() in ('vuplus', 'ini'): config.misc.remotecontrol_text_support = ConfigYesNo(default = True) else: config.misc.remotecontrol_text_support = ConfigYesNo(default = False) config.usage = ConfigSubsection() config.usage.showdish = ConfigSelection(default = "flashing", choices = [("flashing", _("Flashing")), ("normal", _("Not Flashing")), ("off", _("Off"))]) config.usage.multibouquet = ConfigYesNo(default = True) config.usage.alternative_number_mode = ConfigYesNo(default = False) def alternativeNumberModeChange(configElement): eDVBDB.getInstance().setNumberingMode(configElement.value) refreshServiceList() config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange) config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.servicetype_icon_mode.addNotifier(refreshServiceList) config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.crypto_icon_mode.addNotifier(refreshServiceList) config.usage.record_indicator_mode = ConfigSelection(default = "3", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))]) config.usage.record_indicator_mode.addNotifier(refreshServiceList) choicelist = [("-1", _("Disable"))] for i in range(0,1300,100): choicelist.append(("%d" % i, ngettext("%d pixel wide", "%d pixels wide", i) % i)) config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist) config.usage.servicelist_column.addNotifier(refreshServiceList) config.usage.service_icon_enable = ConfigYesNo(default = False) config.usage.service_icon_enable.addNotifier(refreshServiceList) config.usage.servicelist_cursor_behavior = ConfigSelection(default = "keep", choices = [ ("standard", _("Standard")), ("keep", _("Keep service")), ("reverseB", _("Reverse bouquet buttons")), ("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))]) config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False) config.usage.panicbutton = ConfigYesNo(default = True) config.usage.quickzap_bouquet_change = ConfigYesNo(default = False) config.usage.e1like_radio_mode = ConfigYesNo(default = True) choicelist = [] for i in range(1, 11): choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.usage.infobar_timeout = ConfigSelection(default = "5", choices = [("0", _("No timeout"))] + choicelist) config.usage.show_infobar_do_dimming = ConfigYesNo(default = False) config.usage.show_infobar_dimming_speed = ConfigSelectionNumber(min = 1, max = 40, stepwidth = 1, default = 40, wraparound = True) config.usage.show_infobar_on_zap = ConfigYesNo(default = True) config.usage.show_infobar_on_skip = ConfigYesNo(default = True) config.usage.show_infobar_on_event_change = ConfigYesNo(default = False) config.usage.show_infobar_channel_number = ConfigYesNo(default = False) config.usage.show_second_infobar = ConfigSelection(default = "5", choices = [("none", _("None")), ("0", _("No timeout"))] + choicelist + [("EPG",_("EPG")),("INFOBAREPG",_("InfoBar EPG"))]) def showsecondinfobarChanged(configElement): if config.usage.show_second_infobar.value != "INFOBAREPG": SystemInfo["InfoBarEpg"] = True else: SystemInfo["InfoBarEpg"] = False config.usage.show_second_infobar.addNotifier(showsecondinfobarChanged, immediate_feedback = True) config.usage.infobar_frontend_source = ConfigSelection(default = "tuner", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))]) config.usage.show_picon_bkgrn = ConfigSelection(default = "transparent", choices = [("none", _("Disabled")), ("transparent", _("Transparent")), ("blue", _("Blue")), ("red", _("Red")), ("black", _("Black")), ("white", _("White")), ("lightgrey", _("Light Grey")), ("grey", _("Grey"))]) config.usage.show_spinner = ConfigYesNo(default = True) config.usage.enable_tt_caching = ConfigYesNo(default = True) config.usage.sort_settings = ConfigYesNo(default = False) config.usage.sort_menus = ConfigYesNo(default = False) config.usage.sort_pluginlist = ConfigYesNo(default = True) config.usage.movieplayer_pvrstate = ConfigYesNo(default = True) choicelist = [] for i in (10, 30): choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300, 600, 1200, 1800): m = i / 60 choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m)) for i in (3600, 7200, 14400): h = i / 3600 choicelist.append(("%d" % i, ngettext("%d hour", "%d hours", h) % h)) config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist) config.usage.output_12V = ConfigSelection(default = "do not change", choices = [ ("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ]) config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("swap", _("Swap PiP and main picture")), ("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ]) config.usage.pip_hideOnExit = ConfigSelection(default = "no", choices = [ ("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ]) choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))] for i in [60, 300, 600, 900, 1800, 2700, 3600]: m = i/60 choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m)) config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist) if not os.path.exists(resolveFilename(SCOPE_HDD)): try: os.mkdir(resolveFilename(SCOPE_HDD),0755) except: pass config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD)) if not config.usage.default_path.value.endswith('/'): tmpvalue = config.usage.default_path.value config.usage.default_path.setValue(tmpvalue + '/') config.usage.default_path.save() def defaultpathChanged(configElement): if not config.usage.default_path.value.endswith('/'): tmpvalue = config.usage.default_path.value config.usage.default_path.setValue(tmpvalue + '/') config.usage.default_path.save() config.usage.default_path.addNotifier(defaultpathChanged, immediate_feedback = False) config.usage.timer_path = ConfigText(default = "<default>") config.usage.instantrec_path = ConfigText(default = "<default>") if not os.path.exists(resolveFilename(SCOPE_TIMESHIFT)): try: os.mkdir(resolveFilename(SCOPE_TIMESHIFT),0755) except: pass config.usage.timeshift_path = ConfigText(default = resolveFilename(SCOPE_TIMESHIFT)) if not config.usage.default_path.value.endswith('/'): tmpvalue = config.usage.timeshift_path.value config.usage.timeshift_path.setValue(tmpvalue + '/') config.usage.timeshift_path.save() def timeshiftpathChanged(configElement): if not config.usage.timeshift_path.value.endswith('/'): tmpvalue = config.usage.timeshift_path.value config.usage.timeshift_path.setValue(tmpvalue + '/') config.usage.timeshift_path.save() config.usage.timeshift_path.addNotifier(timeshiftpathChanged, immediate_feedback = False) config.usage.allowed_timeshift_paths = ConfigLocations(default = [resolveFilename(SCOPE_TIMESHIFT)]) config.usage.movielist_trashcan = ConfigYesNo(default=True) config.usage.movielist_trashcan_network_clean = ConfigYesNo(default=False) config.usage.movielist_trashcan_days = ConfigSelectionNumber(min = 1, max = 31, stepwidth = 1, default = 8, wraparound = True) config.usage.movielist_trashcan_reserve = ConfigNumber(default = 40) config.usage.on_movie_start = ConfigSelection(default = "ask yes", choices = [ ("ask yes", _("Ask user (with default as 'yes')")), ("ask no", _("Ask user (with default as 'no')")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning"))]) config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ]) config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")), ("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))]) config.usage.next_movie_msg = ConfigYesNo(default = True) config.usage.last_movie_played = ConfigText() config.usage.leave_movieplayer_onExit = ConfigSelection(default = "no", choices = [ ("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ]) config.usage.setup_level = ConfigSelection(default = "expert", choices = [ ("simple", _("Simple")), ("intermediate", _("Intermediate")), ("expert", _("Expert")) ]) config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [ ("show_menu", _("Show shutdown menu")), ("shutdown", _("Immediate shutdown")), ("standby", _("Standby")) ] ) config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [ ("show_menu", _("Show shutdown menu")), ("shutdown", _("Immediate shutdown")), ("standby", _("Standby")) ] ) choicelist = [("0", "Disabled")] for i in (5, 30, 60, 300, 600, 900, 1200, 1800, 2700, 3600): if i < 60: m = ngettext("%d second", "%d seconds", i) % i else: m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append(("%d" % i, m)) config.usage.screen_saver = ConfigSelection(default = "60", choices = choicelist) config.usage.check_timeshift = ConfigYesNo(default = True) config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [ ("0", "DVB-S/-C/-T"), ("1", "DVB-S/-T/-C"), ("2", "DVB-C/-S/-T"), ("3", "DVB-C/-T/-S"), ("4", "DVB-T/-C/-S"), ("5", "DVB-T/-S/-C"), ("127", _("No priority")) ]) config.usage.remote_fallback_enabled = ConfigYesNo(default = False); config.usage.remote_fallback = ConfigText(default = "", fixed_size = False); nims = [("-1", _("auto"))] rec_nims = [("-2", _("Disabled")), ("-1", _("auto"))] for x in nimmanager.nim_slots: nims.append((str(x.slot), x.getSlotName())) rec_nims.append((str(x.slot), x.getSlotName())) config.usage.frontend_priority = ConfigSelection(default = "-1", choices = nims) config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = rec_nims) config.misc.disable_background_scan = ConfigYesNo(default = False) config.usage.jobtaksextensions = ConfigYesNo(default = True) config.usage.servicenum_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.servicename_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.serviceinfo_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.serviceitems_per_page = ConfigSelectionNumber(default = 16, stepwidth = 1, min = 3, max = 40, wraparound = True) config.usage.show_servicelist = ConfigYesNo(default = True) config.usage.servicelist_mode = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("simple", _("Simple")) ] ) config.usage.servicelistpreview_mode = ConfigYesNo(default = False) config.usage.tvradiobutton_mode = ConfigSelection(default="BouquetList", choices = [ ("ChannelList", _("Channel List")), ("BouquetList", _("Bouquet List")), ("MovieList", _("Movie List"))]) config.usage.channelbutton_mode = ConfigSelection(default="0", choices = [ ("0", _("Just change channels")), ("1", _("Channel List")), ("2", _("Bouquet List"))]) config.usage.show_bouquetalways = ConfigYesNo(default = False) config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [ ('barleft', _("Progress bar left")), ('barright', _("Progress bar right")), ('percleft', _("Percentage left")), ('percright', _("Percentage right")), ('no', _("No")) ]) config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True) config.usage.show_channel_jump_in_servicelist = ConfigSelection(default="alpha", choices = [ ("quick", _("Quick Actions")), ("alpha", _("Alpha")), ("number", _("Number"))]) config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList) config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList) config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False) config.usage.show_message_when_recording_starts = ConfigYesNo(default = True) config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True) config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [ ('o', _("Off")), ('p', _("Progress")), ('s', _("Small progress")), ('i', _("Icons")), ]) config.usage.movielist_unseen = ConfigYesNo(default = True) config.usage.swap_snr_on_osd = ConfigYesNo(default = False) config.usage.swap_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_media_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_time_remaining_on_osd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))]) config.usage.elapsed_time_positive_osd = ConfigYesNo(default = False) config.usage.swap_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_media_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_time_remaining_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))]) config.usage.elapsed_time_positive_vfd = ConfigYesNo(default = False) def SpinnerOnOffChanged(configElement): setSpinnerOnOff(int(configElement.value)) config.usage.show_spinner.addNotifier(SpinnerOnOffChanged) def EnableTtCachingChanged(configElement): setEnableTtCachingOnOff(int(configElement.value)) config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged) def TunerTypePriorityOrderChanged(configElement): setTunerTypePriorityOrder(int(configElement.value)) config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False) def PreferredTunerChanged(configElement): setPreferredTuner(int(configElement.value)) config.usage.frontend_priority.addNotifier(PreferredTunerChanged) config.usage.hide_zap_errors = ConfigYesNo(default = False) config.usage.hide_ci_messages = ConfigYesNo(default = False) config.usage.show_cryptoinfo = ConfigSelection([("0", _("Off")),("1", _("One line")),("2", _("Two lines"))], "2") config.usage.show_eit_nownext = ConfigYesNo(default = True) config.usage.show_vcr_scart = ConfigYesNo(default = False) config.usage.pic_resolution = ConfigSelection(default = None, choices = [(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")]) config.epg = ConfigSubsection() config.epg.eit = ConfigYesNo(default = True) config.epg.mhw = ConfigYesNo(default = False) config.epg.freesat = ConfigYesNo(default = True) config.epg.viasat = ConfigYesNo(default = True) config.epg.netmed = ConfigYesNo(default = True) config.epg.virgin = ConfigYesNo(default = False) def EpgSettingsChanged(configElement): mask = 0xffffffff if not config.epg.eit.value: mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER) if not config.epg.mhw.value: mask &= ~eEPGCache.MHW if not config.epg.freesat.value: mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER) if not config.epg.viasat.value: mask &= ~eEPGCache.VIASAT if not config.epg.netmed.value: mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER) if not config.epg.virgin.value: mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE) eEPGCache.getInstance().setEpgSources(mask) config.epg.eit.addNotifier(EpgSettingsChanged) config.epg.mhw.addNotifier(EpgSettingsChanged) config.epg.freesat.addNotifier(EpgSettingsChanged) config.epg.viasat.addNotifier(EpgSettingsChanged) config.epg.netmed.addNotifier(EpgSettingsChanged) config.epg.virgin.addNotifier(EpgSettingsChanged) config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True) def EpgHistorySecondsChanged(configElement): eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.value*60) config.epg.histminutes.addNotifier(EpgHistorySecondsChanged) config.epg.cacheloadsched = ConfigYesNo(default = False) config.epg.cachesavesched = ConfigYesNo(default = False) def EpgCacheLoadSchedChanged(configElement): import EpgLoadSave EpgLoadSave.EpgCacheLoadCheck() def EpgCacheSaveSchedChanged(configElement): import EpgLoadSave EpgLoadSave.EpgCacheSaveCheck() config.epg.cacheloadsched.addNotifier(EpgCacheLoadSchedChanged, immediate_feedback = False) config.epg.cachesavesched.addNotifier(EpgCacheSaveSchedChanged, immediate_feedback = False) config.epg.cacheloadtimer = ConfigSelectionNumber(default = 24, stepwidth = 1, min = 1, max = 24, wraparound = True) config.epg.cachesavetimer = ConfigSelectionNumber(default = 24, stepwidth = 1, min = 1, max = 24, wraparound = True) config.osd.dst_left = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 720, wraparound = False) config.osd.dst_width = ConfigSelectionNumber(default = 720, stepwidth = 1, min = 0, max = 720, wraparound = False) config.osd.dst_top = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 576, wraparound = False) config.osd.dst_height = ConfigSelectionNumber(default = 576, stepwidth = 1, min = 0, max = 576, wraparound = False) config.osd.alpha = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False) config.av.osd_alpha = NoSave(ConfigNumber(default = 255)) config.osd.threeDmode = ConfigSelection([("off", _("Off")), ("auto", _("Auto")), ("sidebyside", _("Side by Side")),("topandbottom", _("Top and Bottom"))], "auto") config.osd.threeDznorm = ConfigSlider(default = 50, increment = 1, limits = (0, 100)) config.osd.show3dextensions = ConfigYesNo(default = False) hddchoises = [('/etc/enigma2/', 'Internal Flash')] for p in harddiskmanager.getMountedPartitions(): if os.path.exists(p.mountpoint): d = os.path.normpath(p.mountpoint) if p.mountpoint != '/': hddchoises.append((p.mountpoint, d)) config.misc.epgcachepath = ConfigSelection(default = '/etc/enigma2/', choices = hddchoises) config.misc.epgcachefilename = ConfigText(default='epg', fixed_size=False) config.misc.epgcache_filename = ConfigText(default = (config.misc.epgcachepath.value + config.misc.epgcachefilename.value.replace('.dat','') + '.dat')) def EpgCacheChanged(configElement): config.misc.epgcache_filename.setValue(os.path.join(config.misc.epgcachepath.value, config.misc.epgcachefilename.value.replace('.dat','') + '.dat')) config.misc.epgcache_filename.save() eEPGCache.getInstance().setCacheFile(config.misc.epgcache_filename.value) epgcache = eEPGCache.getInstance() epgcache.save() if not config.misc.epgcache_filename.value.startswith("/etc/enigma2/"): if os.path.exists('/etc/enigma2/' + config.misc.epgcachefilename.value.replace('.dat','') + '.dat'): os.remove('/etc/enigma2/' + config.misc.epgcachefilename.value.replace('.dat','') + '.dat') config.misc.epgcachepath.addNotifier(EpgCacheChanged, immediate_feedback = False) config.misc.epgcachefilename.addNotifier(EpgCacheChanged, immediate_feedback = False) config.misc.showradiopic = ConfigYesNo(default = True) def setHDDStandby(configElement): for hdd in harddiskmanager.HDDList(): hdd[1].setIdleTime(int(configElement.value)) config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False) if SystemInfo["12V_Output"]: def set12VOutput(configElement): Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0) config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False) config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml")) config.network = ConfigSubsection() if SystemInfo["WakeOnLAN"]: def wakeOnLANChanged(configElement): if getBoxType() in ('et10000', 'gbquadplus', 'gbquad', 'gb800ueplus', 'gb800seplus', 'gbipbox'): open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off") else: open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable") config.network.wol = ConfigYesNo(default = False) config.network.wol.addNotifier(wakeOnLANChanged) config.network.AFP_autostart = ConfigYesNo(default = True) config.network.NFS_autostart = ConfigYesNo(default = True) config.network.OpenVPN_autostart = ConfigYesNo(default = True) config.network.Samba_autostart = ConfigYesNo(default = True) config.network.Inadyn_autostart = ConfigYesNo(default = True) config.network.uShare_autostart = ConfigYesNo(default = True) config.softwareupdate = ConfigSubsection() config.softwareupdate.autosettingsbackup = ConfigYesNo(default = True) config.softwareupdate.autoimagebackup = ConfigYesNo(default = False) config.softwareupdate.check = ConfigYesNo(default = True) config.softwareupdate.checktimer = ConfigSelectionNumber(min = 1, max = 48, stepwidth = 1, default = 6, wraparound = True) config.softwareupdate.updatelastcheck = ConfigInteger(default=0) config.softwareupdate.updatefound = NoSave(ConfigBoolean(default = False)) config.softwareupdate.updatebeta = ConfigYesNo(default = False) config.softwareupdate.updateisunstable = ConfigInteger(default=0) config.timeshift = ConfigSubsection() choicelist = [("0", "Disabled")] for i in (2, 3, 4, 5, 10, 20, 30): choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300): m = i / 60 choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m)) config.timeshift.startdelay = ConfigSelection(default = "0", choices = choicelist) config.timeshift.showinfobar = ConfigYesNo(default = True) config.timeshift.stopwhilerecording = ConfigYesNo(default = False) config.timeshift.favoriteSaveAction = ConfigSelection([("askuser", _("Ask user")),("savetimeshift", _("Save and stop")),("savetimeshiftandrecord", _("Save and record")),("noSave", _("Don't save"))], "askuser") config.timeshift.permanentrecording = ConfigYesNo(default = False) config.timeshift.isRecording = NoSave(ConfigYesNo(default = False)) config.seek = ConfigSubsection() config.seek.baractivation = ConfigSelection([("leftright", _("Long Left/Right")),("ffrw", _("Long << / >>"))], "leftright") config.seek.sensibility = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 10, wraparound = True) config.seek.selfdefined_13 = ConfigSelectionNumber(min = 1, max = 120, stepwidth = 1, default = 15, wraparound = True) config.seek.selfdefined_46 = ConfigSelectionNumber(min = 1, max = 240, stepwidth = 1, default = 60, wraparound = True) config.seek.selfdefined_79 = ConfigSelectionNumber(min = 1, max = 480, stepwidth = 1, default = 300, wraparound = True) config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25]) config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.on_pause = ConfigSelection(default = "play", choices = [ ("play", _("Play")), ("step", _("Single step (GOP)")), ("last", _("Last speed")) ]) config.crash = ConfigSubsection() config.crash.enabledebug = ConfigYesNo(default = False) config.crash.debugloglimit = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 4, wraparound = True) config.crash.daysloglimit = ConfigSelectionNumber(min = 1, max = 30, stepwidth = 1, default = 8, wraparound = True) config.crash.sizeloglimit = ConfigSelectionNumber(min = 1, max = 20, stepwidth = 1, default = 10, wraparound = True) debugpath = [('/home/root/logs/', '/home/root/')] for p in harddiskmanager.getMountedPartitions(): if os.path.exists(p.mountpoint): d = os.path.normpath(p.mountpoint) if p.mountpoint != '/': debugpath.append((p.mountpoint + 'logs/', d)) config.crash.debug_path = ConfigSelection(default = "/home/root/logs/", choices = debugpath) def updatedebug_path(configElement): if not os.path.exists(config.crash.debug_path.value): os.mkdir(config.crash.debug_path.value,0755) config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback = False) config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("at beginning")), ("end", _("at end"))]) def updateEnterForward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_forward, configElement.value) config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False) def updateEnterBackward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_backward, configElement.value) config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False) def updateEraseSpeed(el): eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value)) def updateEraseFlags(el): eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value)) config.misc.erase_speed = ConfigSelection(default="20", choices = [ ("10", "10 MB/s"), ("20", "20 MB/s"), ("50", "50 MB/s"), ("100", "100 MB/s")]) config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False) config.misc.erase_flags = ConfigSelection(default="1", choices = [ ("0", _("Disable")), ("1", _("Internal hdd only")), ("3", _("Everywhere"))]) config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False) if SystemInfo["ZapMode"]: def setZapmode(el): file = open(SystemInfo["ZapMode"], "w") file.write(el.value) file.close() config.misc.zapmode = ConfigSelection(default = "mute", choices = [ ("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))]) config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False) config.usage.historymode = ConfigSelection(default = "1", choices = [("0", _("Just zap")), ("1", _("Show menu"))]) config.subtitles = ConfigSubsection() config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("original")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False) config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50") config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center") config.subtitles.subtitle_rewrap = ConfigYesNo(default = False) config.subtitles.colourise_dialogs = ConfigYesNo(default = False) config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3") config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40") subtitle_delay_choicelist = [] for i in range(-900000, 1845000, 45000): if i == 0: subtitle_delay_choicelist.append(("0", _("No delay"))) else: subtitle_delay_choicelist.append(("%d" % i, "%2.1f sec" % (i / 90000.))) config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False) config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))]) config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = True) config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [ ("0", _("No transparency")), ("25", "10%"), ("50", "20%"), ("75", "30%"), ("100", "40%"), ("125", "50%"), ("150", "60%"), ("175", "70%"), ("200", "80%"), ("225", "90%"), ("255", _("Full transparency"))]) config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("alternative")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True) config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [ ("1", _("Original")), ("23976", _("23.976")), ("24000", _("24")), ("25000", _("25")), ("29970", _("29.97")), ("30000", _("30"))]) config.subtitles.pango_autoturnon = ConfigYesNo(default = True) config.autolanguage = ConfigSubsection() audio_language_choices=[ ("---", _("None")), ("und", _("Undetermined")), ("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")), ("ara", _("Arabic")), ("eus baq", _("Basque")), ("bul", _("Bulgarian")), ("hrv", _("Croatian")), ("ces cze", _("Czech")), ("dan", _("Danish")), ("dut ndl Dutch", _("Dutch")), ("eng qaa Englisch", _("English")), ("est", _("Estonian")), ("fin", _("Finnish")), ("fra fre", _("French")), ("deu ger", _("German")), ("ell gre", _("Greek")), ("heb", _("Hebrew")), ("hun", _("Hungarian")), ("ita", _("Italian")), ("lav", _("Latvian")), ("lit", _("Lithuanian")), ("ltz", _("Luxembourgish")), ("nor", _("Norwegian")), ("pol", _("Polish")), ("por", _("Portuguese")), ("fas per", _("Persian")), ("ron rum", _("Romanian")), ("rus", _("Russian")), ("srp", _("Serbian")), ("slk slo", _("Slovak")), ("slv", _("Slovenian")), ("spa", _("Spanish")), ("swe", _("Swedish")), ("tha", _("Thai")), ("tur Audio_TUR", _("Turkish")), ("ukr Ukr", _("Ukrainian"))] def setEpgLanguage(configElement): eServiceEvent.setEPGLanguage(configElement.value) config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage) def setEpgLanguageAlternative(configElement): eServiceEvent.setEPGLanguageAlternative(configElement.value) config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative) config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_defaultac3 = ConfigYesNo(default = True) config.autolanguage.audio_defaultddp = ConfigYesNo(default = False) config.autolanguage.audio_usecache = ConfigYesNo(default = True) subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:] config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False) config.autolanguage.subtitle_usecache = ConfigYesNo(default = True) config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [ ("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"), ("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"), ("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"), ("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))]) config.logmanager = ConfigSubsection() config.logmanager.showinextensions = ConfigYesNo(default = False) config.logmanager.user = ConfigText(default='', fixed_size=False) config.logmanager.useremail = ConfigText(default='', fixed_size=False) config.logmanager.usersendcopy = ConfigYesNo(default = True) config.logmanager.path = ConfigText(default = "/") config.logmanager.additionalinfo = NoSave(ConfigText(default = "")) config.logmanager.sentfiles = ConfigLocations(default='') config.vixsettings = ConfigSubsection() config.vixsettings.Subservice = ConfigYesNo(default = False) config.vixsettings.ColouredButtons = ConfigYesNo(default = True) config.vixsettings.InfoBarEpg_mode = ConfigSelection(default="3", choices = [ ("0", _("as plugin in extended bar")), ("1", _("with long OK press")), ("2", _("with exit button")), ("3", _("with left/right buttons"))]) config.epgselection = ConfigSubsection() config.epgselection.sort = ConfigSelection(default="0", choices = [("0", _("Time")),("1", _("Alphanumeric"))]) config.epgselection.overjump = ConfigYesNo(default = False) config.epgselection.infobar_type_mode = ConfigSelection(choices = [("graphics",_("Multi EPG")), ("single", _("Single EPG"))], default = "graphics") if SystemInfo.get("NumVideoDecoders", 1) > 1: config.epgselection.infobar_preview_mode = ConfigSelection(choices = [("0",_("Disabled")), ("1", _("Full screen")), ("2", _("PiP"))], default = "1") else: config.epgselection.infobar_preview_mode = ConfigSelection(choices = [("0",_("Disabled")), ("1", _("Full screen"))], default = "1") config.epgselection.infobar_ok = ConfigSelection(choices = [("Zap",_("Zap")), ("Zap + Exit", _("Zap + Exit"))], default = "Zap") config.epgselection.infobar_oklong = ConfigSelection(choices = [("Zap",_("Zap")), ("Zap + Exit", _("Zap + Exit"))], default = "Zap + Exit") config.epgselection.infobar_itemsperpage = ConfigSelectionNumber(default = 2, stepwidth = 1, min = 1, max = 4, wraparound = True) config.epgselection.infobar_roundto = ConfigSelection(default = "15", choices = [("15", _("%d minutes") % 15), ("30", _("%d minutes") % 30), ("60", _("%d minutes") % 60)]) config.epgselection.infobar_prevtime = ConfigClock(default = time()) config.epgselection.infobar_prevtimeperiod = ConfigSelection(default = "180", choices = [("60", _("%d minutes") % 60), ("90", _("%d minutes") % 90), ("120", _("%d minutes") % 120), ("150", _("%d minutes") % 150), ("180", _("%d minutes") % 180), ("210", _("%d minutes") % 210), ("240", _("%d minutes") % 240), ("270", _("%d minutes") % 270), ("300", _("%d minutes") % 300)]) config.epgselection.infobar_primetimehour = ConfigSelectionNumber(default = 20, stepwidth = 1, min = 00, max = 23, wraparound = True) config.epgselection.infobar_primetimemins = ConfigSelectionNumber(default = 00, stepwidth = 1, min = 00, max = 59, wraparound = True) config.epgselection.infobar_servicetitle_mode = ConfigSelection(default = "servicename", choices = [("servicename", _("Service Name")),("picon", _("Picon")),("picon+servicename", _("Picon and Service Name")) ]) config.epgselection.infobar_servfs = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.epgselection.infobar_eventfs = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.epgselection.infobar_timelinefs = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.epgselection.infobar_timeline24h = ConfigYesNo(default = True) config.epgselection.infobar_servicewidth = ConfigSelectionNumber(default = 250, stepwidth = 1, min = 70, max = 500, wraparound = True) config.epgselection.infobar_piconwidth = ConfigSelectionNumber(default = 100, stepwidth = 1, min = 70, max = 500, wraparound = True) config.epgselection.infobar_infowidth = ConfigSelectionNumber(default = 50, stepwidth = 25, min = 0, max = 150, wraparound = True) config.epgselection.enhanced_preview_mode = ConfigYesNo(default = True) config.epgselection.enhanced_ok = ConfigSelection(choices = [("Zap",_("Zap")), ("Zap + Exit", _("Zap + Exit"))], default = "Zap") config.epgselection.enhanced_oklong = ConfigSelection(choices = [("Zap",_("Zap")), ("Zap + Exit", _("Zap + Exit"))], default = "Zap + Exit") config.epgselection.enhanced_eventfs = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.epgselection.enhanced_itemsperpage = ConfigSelectionNumber(default = 18, stepwidth = 1, min = 12, max = 40, wraparound = True) config.epgselection.multi_showbouquet = ConfigYesNo(default = False) config.epgselection.multi_preview_mode = ConfigYesNo(default = True) config.epgselection.multi_ok = ConfigSelection(choices = [("Zap",_("Zap")), ("Zap + Exit", _("Zap + Exit"))], default = "Zap") config.epgselection.multi_oklong = ConfigSelection(choices = [("Zap",_("Zap")), ("Zap + Exit", _("Zap + Exit"))], default = "Zap + Exit") config.epgselection.multi_eventfs = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.epgselection.multi_itemsperpage = ConfigSelectionNumber(default = 18, stepwidth = 1, min = 12, max = 40, wraparound = True) config.epgselection.graph_showbouquet = ConfigYesNo(default = False) config.epgselection.graph_preview_mode = ConfigYesNo(default = True) config.epgselection.graph_type_mode = ConfigSelection(choices = [("graphics",_("Graphics")), ("text", _("Text"))], default = "graphics") config.epgselection.graph_ok = ConfigSelection(choices = [("Zap",_("Zap")), ("Zap + Exit", _("Zap + Exit"))], default = "Zap") config.epgselection.graph_oklong = ConfigSelection(choices = [("Zap",_("Zap")), ("Zap + Exit", _("Zap + Exit"))], default = "Zap + Exit") config.epgselection.graph_info = ConfigSelection(choices = [("Channel Info", _("Channel Info")), ("Single EPG", _("Single EPG"))], default = "Channel Info") config.epgselection.graph_infolong = ConfigSelection(choices = [("Channel Info", _("Channel Info")), ("Single EPG", _("Single EPG"))], default = "Single EPG") config.epgselection.graph_roundto = ConfigSelection(default = "15", choices = [("15", _("%d minutes") % 15), ("30", _("%d minutes") % 30), ("60", _("%d minutes") % 60)]) config.epgselection.graph_prevtime = ConfigClock(default = time()) config.epgselection.graph_prevtimeperiod = ConfigSelection(default = "180", choices = [("60", _("%d minutes") % 60), ("90", _("%d minutes") % 90), ("120", _("%d minutes") % 120), ("150", _("%d minutes") % 150), ("180", _("%d minutes") % 180), ("210", _("%d minutes") % 210), ("240", _("%d minutes") % 240), ("270", _("%d minutes") % 270), ("300", _("%d minutes") % 300)]) config.epgselection.graph_primetimehour = ConfigSelectionNumber(default = 20, stepwidth = 1, min = 00, max = 23, wraparound = True) config.epgselection.graph_primetimemins = ConfigSelectionNumber(default = 00, stepwidth = 1, min = 00, max = 59, wraparound = True) config.epgselection.graph_servicetitle_mode = ConfigSelection(default = "servicename", choices = [("servicename", _("Service Name")),("picon", _("Picon")),("picon+servicename", _("Picon and Service Name")) ]) config.epgselection.graph_channel1 = ConfigYesNo(default = False) config.epgselection.graph_servfs = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.epgselection.graph_eventfs = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.epgselection.graph_timelinefs = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.epgselection.graph_timeline24h = ConfigYesNo(default = True) config.epgselection.graph_itemsperpage = ConfigSelectionNumber(default = 8, stepwidth = 1, min = 3, max = 20, wraparound = True) config.epgselection.graph_pig = ConfigYesNo(default = True) config.epgselection.graph_heightswitch = NoSave(ConfigYesNo(default = False)) config.epgselection.graph_servicewidth = ConfigSelectionNumber(default = 250, stepwidth = 1, min = 70, max = 500, wraparound = True) config.epgselection.graph_piconwidth = ConfigSelectionNumber(default = 100, stepwidth = 1, min = 70, max = 500, wraparound = True) config.epgselection.graph_infowidth = ConfigSelectionNumber(default = 50, stepwidth = 25, min = 0, max = 150, wraparound = True) if not os.path.exists('/usr/softcams/'): os.mkdir('/usr/softcams/',0755) softcams = os.listdir('/usr/softcams/') config.oscaminfo = ConfigSubsection() config.oscaminfo.showInExtensions = ConfigYesNo(default=False) config.oscaminfo.userdatafromconf = ConfigYesNo(default = False) config.oscaminfo.autoupdate = ConfigYesNo(default = False) config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12) config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False) config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True) config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) ) config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True) SystemInfo["OScamInstalled"] = False config.cccaminfo = ConfigSubsection() config.cccaminfo.showInExtensions = ConfigYesNo(default=False) config.cccaminfo.serverNameLength = ConfigSelectionNumber(min = 10, max = 100, stepwidth = 1, default = 22, wraparound = True) config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False) config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False) config.cccaminfo.username = ConfigText(default="", fixed_size=False) config.cccaminfo.password = ConfigText(default="", fixed_size=False) config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535)) config.cccaminfo.profile = ConfigText(default="", fixed_size=False) config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True) config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 5, wraparound = True) config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True) config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50) config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50) config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False) config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False) SystemInfo["CCcamInstalled"] = False for softcam in softcams: if softcam.lower().startswith('cccam'): config.cccaminfo.showInExtensions = ConfigYesNo(default=True) SystemInfo["CCcamInstalled"] = True elif softcam.lower().startswith('oscam'): config.oscaminfo.showInExtensions = ConfigYesNo(default=True) SystemInfo["OScamInstalled"] = True config.streaming = ConfigSubsection() config.streaming.stream_ecm = ConfigYesNo(default = False) config.streaming.descramble = ConfigYesNo(default = True) config.streaming.stream_eit = ConfigYesNo(default = True) config.streaming.stream_ait = ConfigYesNo(default = True) config.streaming.authentication = ConfigYesNo(default = False) config.pluginbrowser = ConfigSubsection() config.pluginbrowser.po = ConfigYesNo(default = False) config.pluginbrowser.src = ConfigYesNo(default = False)
def InitUsageConfig(): config.usage = ConfigSubsection() config.usage.showdish = ConfigYesNo(default = True) config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))]) config.usage.multibouquet = ConfigYesNo(default = True) config.usage.alternative_number_mode = ConfigYesNo(default = False) def alternativeNumberModeChange(configElement): eDVBDB.getInstance().setNumberingMode(configElement.value) refreshServiceList() config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange) config.usage.hide_number_markers = ConfigYesNo(default = True) config.usage.hide_number_markers.addNotifier(refreshServiceList) config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.servicetype_icon_mode.addNotifier(refreshServiceList) config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.crypto_icon_mode.addNotifier(refreshServiceList) config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))]) config.usage.record_indicator_mode.addNotifier(refreshServiceList) choicelist = [("-1", _("Disable"))] for i in range(0,1300,100): choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i)) config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist) config.usage.servicelist_column.addNotifier(refreshServiceList) config.usage.service_icon_enable = ConfigYesNo(default = False) config.usage.service_icon_enable.addNotifier(refreshServiceList) config.usage.servicelist_cursor_behavior = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("keep", _("Keep service")), ("reverseB", _("Reverse bouquet buttons")), ("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))]) choicelist = [("by skin", _("As defined by the skin"))] for i in range (5,41): choicelist.append((str(i))) config.usage.servicelist_number_of_services = ConfigSelection(default = "by skin", choices = choicelist) config.usage.servicelist_number_of_services.addNotifier(refreshServiceList) config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False) config.usage.quickzap_bouquet_change = ConfigYesNo(default = False) config.usage.e1like_radio_mode = ConfigYesNo(default = True) choicelist = [("0", _("No timeout"))] for i in range(1, 12): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist) config.usage.show_infobar_on_zap = ConfigYesNo(default = True) config.usage.show_infobar_on_skip = ConfigYesNo(default = True) config.usage.show_infobar_on_event_change = ConfigYesNo(default = False) config.usage.show_second_infobar = ConfigSelection(default = "0", choices = [("", _("None"))] + choicelist + [("EPG",_("EPG"))]) config.usage.show_simple_second_infobar = ConfigYesNo(default = False) config.usage.infobar_frontend_source = ConfigSelection(default = "settings", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))]) config.usage.oldstyle_zap_controls = ConfigYesNo(default = False) config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False) config.usage.zap_with_ch_buttons = ConfigYesNo(default = False) config.usage.ok_is_channelselection = ConfigYesNo(default = False) config.usage.volume_instead_of_channelselection = ConfigYesNo(default = False) config.usage.channelselection_preview = ConfigYesNo(default = False) config.usage.show_spinner = ConfigYesNo(default = True) config.usage.menu_sort_weight = ConfigDictionarySet(default = { "mainmenu" : {"submenu" : {} }}) config.usage.menu_sort_mode = ConfigSelection(default = "default", choices = [ ("a_z", _("alphabetical")), ("default", _("Default")), ("user", _("user defined")),]) config.usage.menu_show_numbers = ConfigYesNo(default = False) config.usage.menu_path = ConfigSelection(default = "off", choices = [ ("off", _("Disabled")), ("small", _("Small")), ("large", _("Large")),]) config.usage.enable_tt_caching = ConfigYesNo(default = True) choicelist = [] for i in (10, 30): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300, 600, 1200, 1800): m = i / 60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) for i in (3600, 7200, 14400): h = i / 3600 choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h)) config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist) config.usage.output_12V = ConfigSelection(default = "do not change", choices = [ ("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ]) config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("swap", _("Swap PiP and main picture")), ("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ]) config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [ ("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ]) choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))] for i in [60, 300, 600, 900, 1800, 2700, 3600]: m = i/60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) config.usage.pip_last_service_timeout = ConfigSelection(default = "-1", choices = choicelist) config.usage.pip_onStart = ConfigSelection(default = "nothing", choices = [ ("nothing", _("Do nothing")), ("move", _("Move main picture to PiP")), ("transponder", _("Open current transponder")), ("channellist", _("Open channel list")) ]) config.usage.default_path = ConfigText(default = "") config.usage.timer_path = ConfigText(default = "<default>") config.usage.instantrec_path = ConfigText(default = "<default>") config.usage.timeshift_path = ConfigText(default = "/media/hdd/") config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"]) config.usage.movielist_trashcan = ConfigYesNo(default=True) config.usage.movielist_trashcan_days = ConfigNumber(default=8) config.usage.movielist_trashcan_reserve = ConfigNumber(default=40) config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [ ("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")), ("ask no", _("Ask user") + " " + _("default") + " " + _("no")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning"))]) config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ]) config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")), ("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))]) config.usage.next_movie_msg = ConfigYesNo(default = True) config.usage.last_movie_played = ConfigText() config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [ ("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ]) config.usage.setup_level = ConfigSelection(default = "simple", choices = [ ("simple", _("Normal")), ("intermediate", _("Advanced")), ("expert", _("Expert")) ]) config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [ ("no", _("No")), ("yes", _("Yes")), ("except", _("No, except Wakeup timer")) ]) config.usage.wakeup_enabled = ConfigSelection(default = "no", choices = [ ("no", _("No")), ("yes", _("Yes")), ("standby", _("Yes, only from standby")), ("deepstandby", _("Yes, only from deep standby")) ]) config.usage.wakeup_day = ConfigSubDict() config.usage.wakeup_time = ConfigSubDict() for i in range(7): config.usage.wakeup_day[i] = ConfigEnableDisable(default = False) config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60)) choicelist = [("0", _("Do nothing"))] for i in range(3600, 21601, 3600): h = abs(i / 3600) h = ngettext("%d hour", "%d hours", h) % h choicelist.append((str(i), _("Standby in ") + h)) config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist) config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True) config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_by_weekdays = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_begin_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_end_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_begin_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_end_day = ConfigSubDict() for i in range(7): config.usage.inactivity_timer_blocktime_day[i] = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_day[i] = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_extra_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))] for i in range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append((str(i), _("Standby in ") + m)) config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist) choicelist = [("0", _("Disabled"))] for i in [60, 300, 600] + range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append((str(i), _("after ") + m)) config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist) config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = False) config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled"))] for m in (1, 5, 10, 15, 30, 60): choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m)) config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist) config.usage.check_timeshift = ConfigYesNo(default = True) choicelist = [("0", _("Disabled"))] for i in (2, 3, 4, 5, 10, 20, 30): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300): m = i / 60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist) config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [ ("0", "DVB-S/-C/-T"), ("1", "DVB-S/-T/-C"), ("2", "DVB-C/-S/-T"), ("3", "DVB-C/-T/-S"), ("4", "DVB-T/-C/-S"), ("5", "DVB-T/-S/-C"), ("127", _("No priority")) ]) def remote_fallback_changed(configElement): if configElement.value: configElement.value = "%s%s" % (not configElement.value.startswith("http://") and "http://" or "", configElement.value) configElement.value = "%s%s" % (configElement.value, configElement.value.count(":") == 1 and ":8001" or "") config.usage.remote_fallback_enabled = ConfigYesNo(default = False) config.usage.remote_fallback = ConfigText(default = "", fixed_size = False) config.usage.remote_fallback.addNotifier(remote_fallback_changed, immediate_feedback=False) config.usage.show_timer_conflict_warning = ConfigYesNo(default = True) dvbs_nims = [("-2", _("Disabled"))] dvbt_nims = [("-2", _("Disabled"))] dvbc_nims = [("-2", _("Disabled"))] atsc_nims = [("-2", _("Disabled"))] nims = [("-1", _("auto"))] for x in nimmanager.nim_slots: if x.isCompatible("DVB-S"): dvbs_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("DVB-T"): dvbt_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("DVB-C"): dvbc_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("ATSC"): atsc_nims.append((str(x.slot), x.getSlotName())) nims.append((str(x.slot), x.getSlotName())) SystemInfo["priority_tuner_available"] = len(nims) > 2 config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims)) nims.insert(0,("-2", _("Disabled"))) config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims) config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims)) dvbs_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims) config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims)) dvbt_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims) config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims)) dvbc_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims) config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims)) atsc_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims) SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and any(len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims)) SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims)) SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims)) SystemInfo["ATSC_priority_tuner_available"] = len(atsc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims)) config.misc.disable_background_scan = ConfigYesNo(default = False) config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [ ('barleft', _("Progress bar left")), ('barright', _("Progress bar right")), ('percleft', _("Percentage left")), ('percright', _("Percentage right")), ('no', _("No")) ]) config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True) config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList) config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList) config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False) config.usage.show_message_when_recording_starts = ConfigYesNo(default = True) config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True) config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [ ('o', _("Off")), ('p', _("Progress")), ('s', _("Small progress")), ('i', _("Icons")), ]) config.usage.movielist_unseen = ConfigYesNo(default = False) config.usage.swap_snr_on_osd = ConfigYesNo(default = False) def SpinnerOnOffChanged(configElement): setSpinnerOnOff(int(configElement.value)) config.usage.show_spinner.addNotifier(SpinnerOnOffChanged) def EnableTtCachingChanged(configElement): setEnableTtCachingOnOff(int(configElement.value)) config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged) def TunerTypePriorityOrderChanged(configElement): setTunerTypePriorityOrder(int(configElement.value)) config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False) def PreferredTunerChanged(configElement): setPreferredTuner(int(configElement.value)) config.usage.frontend_priority.addNotifier(PreferredTunerChanged) config.usage.show_picon_in_display = ConfigYesNo(default = True) config.usage.hide_zap_errors = ConfigYesNo(default = False) config.usage.show_cryptoinfo = ConfigYesNo(default = True) config.usage.show_eit_nownext = ConfigYesNo(default = True) config.usage.show_vcr_scart = ConfigYesNo(default = False) config.usage.show_update_disclaimer = ConfigYesNo(default = True) config.usage.pic_resolution = ConfigSelection(default=None, choices=[(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")][:SystemInfo["HasFullHDSkinSupport"] and 4 or 3]) if SystemInfo["Fan"]: choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))] if os.path.exists("/proc/stb/fp/fan_choices"): choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")] config.usage.fan = ConfigSelection(choicelist) def fanChanged(configElement): open(SystemInfo["Fan"], "w").write(configElement.value) config.usage.fan.addNotifier(fanChanged) if SystemInfo["FanPWM"]: def fanSpeedChanged(configElement): open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:]) config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255)) config.usage.fanspeed.addNotifier(fanSpeedChanged) if SystemInfo["StandbyLED"]: def standbyLEDChanged(configElement): open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off") config.usage.standbyLED = ConfigYesNo(default = True) config.usage.standbyLED.addNotifier(standbyLEDChanged) if SystemInfo["PowerOffDisplay"]: def powerOffDisplayChanged(configElement): open(SystemInfo["PowerOffDisplay"], "w").write(configElement.value and "1" or "0") config.usage.powerOffDisplay = ConfigYesNo(default = True) config.usage.powerOffDisplay.addNotifier(powerOffDisplayChanged) if SystemInfo["LCDshow_symbols"]: def lcdShowSymbols(configElement): open(SystemInfo["LCDshow_symbols"], "w").write(configElement.value and "1" or "0") config.usage.lcd_show_symbols = ConfigYesNo(default = True) config.usage.lcd_show_symbols.addNotifier(lcdShowSymbols) if SystemInfo["WakeOnLAN"]: def wakeOnLANChanged(configElement): if "fp" in SystemInfo["WakeOnLAN"]: open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable") else: open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off") config.usage.wakeOnLAN = ConfigYesNo(default = False) config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged) if SystemInfo["hasXcoreVFD"]: def set12to8characterVFD(configElement): open(SystemInfo["hasXcoreVFD"], "w").write(not configElement.value and "1" or "0") config.usage.toggle12to8characterVFD = ConfigYesNo(default = False) config.usage.toggle12to8characterVFD.addNotifier(set12to8characterVFD) config.epg = ConfigSubsection() config.epg.eit = ConfigYesNo(default = True) config.epg.mhw = ConfigYesNo(default = False) config.epg.freesat = ConfigYesNo(default = True) config.epg.viasat = ConfigYesNo(default = True) config.epg.netmed = ConfigYesNo(default = True) config.epg.virgin = ConfigYesNo(default = False) config.misc.showradiopic = ConfigYesNo(default = True) def EpgSettingsChanged(configElement): from enigma import eEPGCache mask = 0xffffffff if not config.epg.eit.value: mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER) if not config.epg.mhw.value: mask &= ~eEPGCache.MHW if not config.epg.freesat.value: mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER) if not config.epg.viasat.value: mask &= ~eEPGCache.VIASAT if not config.epg.netmed.value: mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER) if not config.epg.virgin.value: mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE) eEPGCache.getInstance().setEpgSources(mask) config.epg.eit.addNotifier(EpgSettingsChanged) config.epg.mhw.addNotifier(EpgSettingsChanged) config.epg.freesat.addNotifier(EpgSettingsChanged) config.epg.viasat.addNotifier(EpgSettingsChanged) config.epg.netmed.addNotifier(EpgSettingsChanged) config.epg.virgin.addNotifier(EpgSettingsChanged) config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True) def EpgHistorySecondsChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60) config.epg.histminutes.addNotifier(EpgHistorySecondsChanged) def setHDDStandby(configElement): for hdd in harddiskmanager.HDDList(): hdd[1].setIdleTime(int(configElement.value)) config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False) if SystemInfo["12V_Output"]: def set12VOutput(configElement): Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0) config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False) config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml")) config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml")) config.seek = ConfigSubsection() config.seek.selfdefined_13 = ConfigNumber(default=15) config.seek.selfdefined_46 = ConfigNumber(default=60) config.seek.selfdefined_79 = ConfigNumber(default=300) config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25]) config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.on_pause = ConfigSelection(default = "play", choices = [ ("play", _("Play")), ("step", _("Single step (GOP)")), ("last", _("Last speed")) ]) config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))]) def updateEnterForward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_forward, configElement.value) config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False) def updateEnterBackward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_backward, configElement.value) config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False) def updateEraseSpeed(el): eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value)) def updateEraseFlags(el): eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value)) config.misc.erase_speed = ConfigSelection(default="20", choices = [ ("10", "10 MB/s"), ("20", "20 MB/s"), ("50", "50 MB/s"), ("100", "100 MB/s")]) config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False) config.misc.erase_flags = ConfigSelection(default="1", choices = [ ("0", _("Disable")), ("1", _("Internal hdd only")), ("3", _("Everywhere"))]) config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False) if SystemInfo["ZapMode"]: def setZapmode(el): open(SystemInfo["ZapMode"], "w").write(el.value) config.misc.zapmode = ConfigSelection(default = "mute", choices = [ ("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))]) config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False) if SystemInfo["VFD_scroll_repeats"]: def scroll_repeats(el): open(SystemInfo["VFD_scroll_repeats"], "w").write(el.value) choicelist = [] for i in range(1, 11, 1): choicelist.append((str(i))) config.usage.vfd_scroll_repeats = ConfigSelection(default = "3", choices = choicelist) config.usage.vfd_scroll_repeats.addNotifier(scroll_repeats, immediate_feedback = False) if SystemInfo["VFD_scroll_delay"]: def scroll_delay(el): open(SystemInfo["VFD_scroll_delay"], "w").write(el.value) choicelist = [] for i in range(0, 1001, 50): choicelist.append((str(i))) config.usage.vfd_scroll_delay = ConfigSelection(default = "150", choices = choicelist) config.usage.vfd_scroll_delay.addNotifier(scroll_delay, immediate_feedback = False) if SystemInfo["VFD_initial_scroll_delay"]: def initial_scroll_delay(el): open(SystemInfo["VFD_initial_scroll_delay"], "w").write(el.value) choicelist = [] for i in range(0, 20001, 500): choicelist.append((str(i))) config.usage.vfd_initial_scroll_delay = ConfigSelection(default = "1000", choices = choicelist) config.usage.vfd_initial_scroll_delay.addNotifier(initial_scroll_delay, immediate_feedback = False) if SystemInfo["VFD_final_scroll_delay"]: def final_scroll_delay(el): open(SystemInfo["VFD_final_scroll_delay"], "w").write(el.value) choicelist = [] for i in range(0, 20001, 500): choicelist.append((str(i))) config.usage.vfd_final_scroll_delay = ConfigSelection(default = "1000", choices = choicelist) config.usage.vfd_final_scroll_delay.addNotifier(final_scroll_delay, immediate_feedback = False) if SystemInfo["HasForceLNBOn"]: def forceLNBPowerChanged(configElement): open(SystemInfo["HasForceLNBOn"], "w").write(configElement.value) config.misc.forceLnbPower = ConfigSelection(default = "on", choices = [ ("on", _("Yes")), ("off", _("No"))] ) config.misc.forceLnbPower.addNotifier(forceLNBPowerChanged) if SystemInfo["HasForceToneburst"]: def forceToneBurstChanged(configElement): open(SystemInfo["HasForceToneburst"], "w").write(configElement.value) config.misc.forceToneBurst = ConfigSelection(default = "enable", choices = [ ("enable", _("Yes")), ("disable", _("No"))] ) config.misc.forceToneBurst.addNotifier(forceToneBurstChanged) if SystemInfo["HasBypassEdidChecking"]: def setHasBypassEdidChecking(configElement): open(SystemInfo["HasBypassEdidChecking"], "w").write(configElement.value) config.av.bypassEdidChecking = ConfigSelection(default = "nonstrict", choices = [ ("strict", _("Yes")), ("nonstrict", _("No"))] ) config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking) if SystemInfo["HasColorspace"]: def setHaveColorspace(configElement): open(SystemInfo["HasColorspace"], "w").write(configElement.value) if SystemInfo["HasColorspaceSimple"]: config.av.hdmicolorspace = ConfigSelection(default = "Edid(Auto)", choices={"Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420")}) else: config.av.hdmicolorspace = ConfigSelection(default = "hdmi_rgb", choices={"hdmi_rgb": _("rgb"), "hdmi_yuv": _("yuv"), "hdmi_422": _("422")}) config.av.hdmicolorspace.addNotifier(setHaveColorspace) if SystemInfo["HasColordepth"]: def setHaveColordepth(configElement): open(SystemInfo["HasColordepth"], "w").write(configElement.value) config.av.hdmicolordepth = ConfigSelection(default = "auto", choices={"auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit")}) config.av.hdmicolordepth.addNotifier(setHaveColordepth) if SystemInfo["HasHDMIpreemphasis"]: def setHDMIpreemphasis(configElement): open(SystemInfo["HasHDMIpreemphasis"], "w").write(configElement.value) config.av.hdmipreemphasis = ConfigSelection(default = "off", choices = [ ("on", _("Yes")), ("off", _("No"))] ) config.av.hdmipreemphasis.addNotifier(setHDMIpreemphasis) if SystemInfo["HasColorimetry"]: def setColorimetry(configElement): open(SystemInfo["HasColorimetry"], "w").write(configElement.value) config.av.hdmicolorimetry = ConfigSelection(default = "auto", choices = [("auto", _("Auto")), ("bt2020ncl", _("BT 2020 NCL")), ("bt2020cl", _("BT 2020 CL")), ("bt709", _("BT 709"))]) config.av.hdmicolorimetry.addNotifier(setColorimetry) config.subtitles = ConfigSubsection() config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("original")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False) config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50") config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center") config.subtitles.subtitle_rewrap = ConfigYesNo(default = False) config.subtitles.colourise_dialogs = ConfigYesNo(default = False) config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3") config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40") config.subtitles.showbackground = ConfigYesNo(default = False) subtitle_delay_choicelist = [] for i in range(-900000, 1845000, 45000): if i == 0: subtitle_delay_choicelist.append(("0", _("No delay"))) else: subtitle_delay_choicelist.append((str(i), "%2.1f sec" % (i / 90000.))) config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False) config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))]) config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = False) config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [ ("0", _("No transparency")), ("25", "10%"), ("50", "20%"), ("75", "30%"), ("100", "40%"), ("125", "50%"), ("150", "60%"), ("175", "70%"), ("200", "80%"), ("225", "90%"), ("255", _("Full transparency"))]) config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("alternative")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True) config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [ ("1", _("Original")), ("23976", _("23.976")), ("24000", _("24")), ("25000", _("25")), ("29970", _("29.97")), ("30000", _("30"))]) config.subtitles.pango_autoturnon = ConfigYesNo(default = True) config.autolanguage = ConfigSubsection() audio_language_choices=[ ("---", _("None")), ("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")), ("ara", _("Arabic")), ("eus baq", _("Basque")), ("bul", _("Bulgarian")), ("hrv", _("Croatian")), ("chn sgp", _("Chinese - Simplified")), ("twn hkn",_("Chinese - Traditional")), ("ces cze", _("Czech")), ("dan", _("Danish")), ("dut ndl nld", _("Dutch")), ("eng qaa", _("English")), ("est", _("Estonian")), ("fin", _("Finnish")), ("fra fre", _("French")), ("deu ger", _("German")), ("ell gre", _("Greek")), ("heb", _("Hebrew")), ("hun", _("Hungarian")), ("ita", _("Italian")), ("lav", _("Latvian")), ("lit", _("Lithuanian")), ("ltz", _("Luxembourgish")), ("nor", _("Norwegian")), ("fas per fa pes", _("Persian")), ("pol", _("Polish")), ("por dub Dub DUB ud1", _("Portuguese")), ("ron rum", _("Romanian")), ("rus", _("Russian")), ("srp", _("Serbian")), ("slk slo", _("Slovak")), ("slv", _("Slovenian")), ("spa", _("Spanish")), ("swe", _("Swedish")), ("tha", _("Thai")), ("tur Audio_TUR", _("Turkish")), ("ukr Ukr", _("Ukrainian"))] def setEpgLanguage(configElement): eServiceEvent.setEPGLanguage(configElement.value) config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage) def setEpgLanguageAlternative(configElement): eServiceEvent.setEPGLanguageAlternative(configElement.value) config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative) config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False) config.autolanguage.audio_defaultddp = ConfigYesNo(default = False) config.autolanguage.audio_usecache = ConfigYesNo(default = True) subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:] config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False) config.autolanguage.subtitle_usecache = ConfigYesNo(default = True) config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [ ("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"), ("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"), ("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"), ("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))]) config.streaming = ConfigSubsection() config.streaming.stream_ecm = ConfigYesNo(default = False) config.streaming.descramble = ConfigYesNo(default = True) config.streaming.descramble_client = ConfigYesNo(default = False) config.streaming.stream_eit = ConfigYesNo(default = True) config.streaming.stream_ait = ConfigYesNo(default = True) config.streaming.authentication = ConfigYesNo(default = False) config.streaming.connectionSpeedInKb = ConfigNumber(default=99999) config.mediaplayer = ConfigSubsection() config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False) config.mediaplayer.alternateUserAgent = ConfigText(default="") config.misc.softcam_setup = ConfigSubsection() config.misc.softcam_setup.extension_menu = ConfigYesNo(default = True) config.mediaplayer.defaultPlayer = ConfigSelection(default = "libeplayer", choices = [ ("libeplayer", _("Libeplayer")), ("gstreamer", _("Gstreamer"))]) def defaultPlayerChange(configElement): path = eEnv.resolve("${sysconfdir}/enigma2/mp3player") if configElement.value == "gstreamer": open(path, "wb").close() elif os.path.exists(path): os.remove(path) config.mediaplayer.defaultPlayer.addNotifier(defaultPlayerChange)
def InitUsageConfig(): config.misc.useNTPminutes = ConfigSelection(default = "30", choices = [("30", "30" + " " +_("minutes")), ("60", _("Hour")), ("1440", _("Once per day"))]) config.usage = ConfigSubsection() config.usage.showdish = ConfigYesNo(default = True) config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))]) config.usage.multibouquet = ConfigYesNo(default = True) config.usage.alternative_number_mode = ConfigYesNo(default = False) def alternativeNumberModeChange(configElement): eDVBDB.getInstance().setNumberingMode(configElement.value) refreshServiceList() config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange) config.usage.hide_number_markers = ConfigYesNo(default = True) config.usage.hide_number_markers.addNotifier(refreshServiceList) config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.crypto_icon_mode.addNotifier(refreshServiceList) config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.servicetype_icon_mode.addNotifier(refreshServiceList) config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))]) config.usage.record_indicator_mode.addNotifier(refreshServiceList) choicelist = [("-1", _("Disable"))] for i in range(0,1300,100): choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i)) config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist) config.usage.servicelist_column.addNotifier(refreshServiceList) config.usage.service_icon_enable = ConfigYesNo(default = False) config.usage.service_icon_enable.addNotifier(refreshServiceList) config.usage.servicelist_cursor_behavior = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("keep", _("Keep service")), ("reverseB", _("Reverse bouquet buttons")), ("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))]) config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False) config.usage.quickzap_bouquet_change = ConfigYesNo(default = False) config.usage.e1like_radio_mode = ConfigYesNo(default = True) config.usage.volume_step_slow = ConfigSelectionNumber(default = 1, stepwidth = 1, min = 1, max = 10, wraparound = False) config.usage.volume_step_fast = ConfigSelectionNumber(default = 3, stepwidth = 1, min = 1, max = 10, wraparound = False) choicelist = [("0", _("No timeout"))] for i in range(1, 12): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist) config.usage.show_infobar_on_zap = ConfigYesNo(default = True) config.usage.show_infobar_on_skip = ConfigYesNo(default = True) config.usage.show_infobar_on_event_change = ConfigYesNo(default = False) config.usage.show_second_infobar = ConfigSelection(default = "11", choices = [(None, _("None"))] + choicelist + [("EPG",_("EPG"))]) config.usage.infobar_frontend_source = ConfigSelection(default = "tuner", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))]) config.usage.oldstyle_zap_controls = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("neutrino", _("Neutrino")), ("openspa", _("OpenSPA")) ]) config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False) config.usage.zap_with_ch_buttons = ConfigYesNo(default = False) config.usage.ok_is_channelselection = ConfigYesNo(default = False) config.usage.channelselection_preview = ConfigYesNo(default = False) config.usage.show_spinner = ConfigYesNo(default = True) config.usage.enable_tt_caching = ConfigYesNo(default = True) config.usage.sort_settings = ConfigYesNo(default = False) config.usage.sort_menus = ConfigYesNo(default = False) choicelist = [] for i in (10, 30): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300, 600, 1200, 1800): m = i / 60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) for i in (3600, 7200, 14400): h = i / 3600 choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h)) config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist) config.usage.hdd_standby_in_standby = ConfigSelection(default = "-1", choices = [("-1", _("Same as in active")), ("0", _("No standby"))] + choicelist) config.usage.hdd_timer = ConfigYesNo(default = False) config.usage.output_12V = ConfigSelection(default = "do not change", choices = [ ("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ]) config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("swap", _("Swap PiP and main picture")), ("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ]) config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [ ("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ]) choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))] for i in [60, 300, 600, 900, 1800, 2700, 3600]: m = i/60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist) config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD)) config.usage.timer_path = ConfigText(default = "<default>") config.usage.instantrec_path = ConfigText(default = "<default>") config.usage.timeshift_path = ConfigText(default = "/media/hdd/") config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"]) config.plisettings = ConfigSubsection() config.plisettings.Subservice = ConfigYesNo(default = True) config.oscaminfo = ConfigSubsection() config.oscaminfo.showInExtensions = ConfigYesNo(default=False) config.oscaminfo.userdatafromconf = ConfigYesNo(default = False) config.oscaminfo.autoupdate = ConfigYesNo(default = False) config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12) config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False) config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True) config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) ) config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True) config.cccaminfo = ConfigSubsection() config.cccaminfo.showInExtensions = ConfigYesNo(default=False) config.cccaminfo.serverNameLength = ConfigSelectionNumber(min = 10, max = 100, stepwidth = 1, default = 22, wraparound = True) config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False) config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False) config.cccaminfo.username = ConfigText(default="", fixed_size=False) config.cccaminfo.password = ConfigText(default="", fixed_size=False) config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535)) config.cccaminfo.profile = ConfigText(default="", fixed_size=False) config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True) config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 5, wraparound = True) config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True) config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50) config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50) config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False) config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False) config.usage.movielist_trashcan = ConfigYesNo(default=True) config.usage.movielist_trashcan_days = ConfigNumber(default=8) config.usage.movielist_trashcan_reserve = ConfigNumber(default=40) config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [ ("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")), ("ask no", _("Ask user") + " " + _("default") + " " + _("no")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning"))]) config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ]) config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")), ("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))]) config.usage.next_movie_msg = ConfigYesNo(default = True) config.usage.last_movie_played = ConfigText() config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [ ("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ]) config.usage.setup_level = ConfigSelection(default = "expert", choices = [ ("simple", _("Simple")), ("intermediate", _("Intermediate")), ("expert", _("Expert")) ]) config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [ ("no", _("No")), ("yes", _("Yes")), ("except", _("No, except Wakeup timer")) ]) config.usage.wakeup_enabled = ConfigSelection(default = "no", choices = [ ("no", _("No")), ("yes", _("Yes")), ("standby", _("Yes, only from standby")), ("deepstandby", _("Yes, only from deep standby")) ]) config.usage.wakeup_day = ConfigSubDict() config.usage.wakeup_time = ConfigSubDict() for i in range(7): config.usage.wakeup_day[i] = ConfigEnableDisable(default = False) config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60)) config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [ ("show_menu", _("Show shutdown menu")), ("shutdown", _("Immediate shutdown")), ("standby", _("Standby")), ("restart", _("Reboot")) ] ) config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [ ("show_menu", _("Show shutdown menu")), ("shutdown", _("Immediate shutdown")), ("standby", _("Standby")) ] ) choicelist = [("0", _("Do nothing"))] for i in range(3600, 21601, 3600): h = abs(i / 3600) h = ngettext("%d hour", "%d hours", h) % h choicelist.append((str(i), _("Standby in ") + h)) config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist) config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True) config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_by_weekdays = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_begin_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_end_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_begin_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_end_day = ConfigSubDict() for i in range(7): config.usage.inactivity_timer_blocktime_day[i] = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_day[i] = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_extra_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))] for i in range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append((str(i), _("Standby in ") + m)) config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist) choicelist = [("0", _("Disabled"))] for i in [60, 300, 600] + range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append((str(i), _("after ") + m)) config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist) config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = False) config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled"))] for m in (1, 5, 10, 15, 30, 60): choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m)) config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist) config.usage.check_timeshift = ConfigYesNo(default = True) choicelist = [("0", _("Disabled"))] for i in (2, 3, 4, 5, 10, 20, 30): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300): m = i / 60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist) config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [ ("0", "DVB-S/-C/-T"), ("1", "DVB-S/-T/-C"), ("2", "DVB-C/-S/-T"), ("3", "DVB-C/-T/-S"), ("4", "DVB-T/-C/-S"), ("5", "DVB-T/-S/-C"), ("127", _("No priority")) ]) def remote_fallback_changed(configElement): if configElement.value: configElement.value = "%s%s" % (not configElement.value.startswith("http://") and "http://" or "", configElement.value) configElement.value = "%s%s" % (configElement.value, configElement.value.count(":") == 1 and ":8001" or "") config.usage.remote_fallback_enabled = ConfigYesNo(default = False) config.usage.remote_fallback = ConfigText(default = _("http://IP-ADDRESS:8001"), fixed_size = False) config.usage.remote_fallback.addNotifier(remote_fallback_changed, immediate_feedback=False) config.usage.show_timer_conflict_warning = ConfigYesNo(default = True) dvbs_nims = [("-2", _("Disabled"))] dvbt_nims = [("-2", _("Disabled"))] dvbc_nims = [("-2", _("Disabled"))] atsc_nims = [("-2", _("Disabled"))] nims = [("-1", _("auto"))] for x in nimmanager.nim_slots: if x.isCompatible("DVB-S"): dvbs_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("DVB-T"): dvbt_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("DVB-C"): dvbc_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("ATSC"): atsc_nims.append((str(x.slot), x.getSlotName())) nims.append((str(x.slot), x.getSlotName())) config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims)) nims.insert(0,("-2", _("Disabled"))) config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims) config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims)) dvbs_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims) config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims)) dvbt_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims) config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims)) dvbc_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims) config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims)) atsc_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims) SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and any(len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims)) SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims)) SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims)) SystemInfo["ATSC_priority_tuner_available"] = len(atsc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims)) config.misc.disable_background_scan = ConfigYesNo(default = False) config.usage.servicenum_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.servicename_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.serviceinfo_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.serviceitems_per_page = ConfigSelectionNumber(default = 14, stepwidth = 1, min = 8, max = 20, wraparound = True) config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [ ('barleft', _("Progress bar left")), ('barright', _("Progress bar right")), ('percleft', _("Percentage left")), ('percright', _("Percentage right")), ('no', _("No")) ]) config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True) config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList) config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList) config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False) config.usage.blinking_rec_symbol_during_recording = ConfigYesNo(default = False) config.usage.show_message_when_recording_starts = ConfigYesNo(default = True) config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True) config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [ ('o', _("Off")), ('p', _("Progress")), ('s', _("Small progress")), ('i', _("Icons")), ]) config.usage.movielist_unseen = ConfigYesNo(default = False) config.usage.swap_snr_on_osd = ConfigYesNo(default = False) config.usage.swap_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_media_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_time_remaining_on_osd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))]) config.usage.elapsed_time_positive_osd = ConfigYesNo(default = False) config.usage.swap_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_media_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_time_remaining_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))]) config.usage.elapsed_time_positive_vfd = ConfigYesNo(default = False) config.usage.lcd_scroll_delay = ConfigSelection(default = "10000", choices = [ ("10000", "10 " + _("seconds")), ("20000", "20 " + _("seconds")), ("30000", "30 " + _("seconds")), ("60000", "1 " + _("minute")), ("300000", "5 " + _("minutes")), ("noscrolling", _("off"))]) config.usage.lcd_scroll_speed = ConfigSelection(default = "300", choices = [ ("500", _("slow")), ("300", _("normal")), ("100", _("fast"))]) config.usage.maxchannelnumlen = ConfigSelection(default = "5", choices = [("4", _("4")), ("5", _("5"))]) config.usage.numzaptimeoutmode = ConfigSelection(default = "standard", choices = [("standard", _("Standard")), ("userdefined", _("User defined")), ("off", _("off"))]) config.usage.numzaptimeout1 = ConfigSlider(default = 3000, increment = 250, limits = (750, 5000)) config.usage.numzaptimeout2 = ConfigSlider(default = 1000, increment = 250, limits = (750, 5000)) def SpinnerOnOffChanged(configElement): setSpinnerOnOff(int(configElement.value)) config.usage.show_spinner.addNotifier(SpinnerOnOffChanged) def EnableTtCachingChanged(configElement): setEnableTtCachingOnOff(int(configElement.value)) config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged) def TunerTypePriorityOrderChanged(configElement): setTunerTypePriorityOrder(int(configElement.value)) config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False) def PreferredTunerChanged(configElement): setPreferredTuner(int(configElement.value)) config.usage.frontend_priority.addNotifier(PreferredTunerChanged) config.usage.hide_zap_errors = ConfigYesNo(default = False) config.usage.hide_ci_messages = ConfigYesNo(default = True) config.usage.show_cryptoinfo = ConfigYesNo(default = True) config.usage.show_eit_nownext = ConfigYesNo(default = True) config.usage.show_vcr_scart = ConfigYesNo(default = False) config.usage.show_update_disclaimer = ConfigYesNo(default = True) config.usage.pic_resolution = ConfigSelection(default = None, choices = [(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")]) if SystemInfo["Fan"]: choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))] if os.path.exists("/proc/stb/fp/fan_choices"): choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")] config.usage.fan = ConfigSelection(choicelist) def fanChanged(configElement): open(SystemInfo["Fan"], "w").write(configElement.value) config.usage.fan.addNotifier(fanChanged) if SystemInfo["FanPWM"]: def fanSpeedChanged(configElement): open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:]) config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255)) config.usage.fanspeed.addNotifier(fanSpeedChanged) if SystemInfo["StandbyLED"]: def standbyLEDChanged(configElement): open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off") config.usage.standbyLED = ConfigYesNo(default = True) config.usage.standbyLED.addNotifier(standbyLEDChanged) config.epg = ConfigSubsection() config.epg.eit = ConfigYesNo(default = True) config.epg.mhw = ConfigYesNo(default = True) config.epg.freesat = ConfigYesNo(default = True) config.epg.viasat = ConfigYesNo(default = True) config.epg.netmed = ConfigYesNo(default = True) config.epg.virgin = ConfigYesNo(default = False) config.misc.showradiopic = ConfigYesNo(default = True) def EpgSettingsChanged(configElement): from enigma import eEPGCache mask = 0xffffffff if not config.epg.eit.value: mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER) if not config.epg.mhw.value: mask &= ~eEPGCache.MHW if not config.epg.freesat.value: mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER) if not config.epg.viasat.value: mask &= ~eEPGCache.VIASAT if not config.epg.netmed.value: mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER) if not config.epg.virgin.value: mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE) eEPGCache.getInstance().setEpgSources(mask) config.epg.eit.addNotifier(EpgSettingsChanged) config.epg.mhw.addNotifier(EpgSettingsChanged) config.epg.freesat.addNotifier(EpgSettingsChanged) config.epg.viasat.addNotifier(EpgSettingsChanged) config.epg.netmed.addNotifier(EpgSettingsChanged) config.epg.virgin.addNotifier(EpgSettingsChanged) config.epg.maxdays = ConfigSelectionNumber(min = 1, max = 28, stepwidth = 1, default = 5, wraparound = True) def EpgmaxdaysChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgmaxdays(config.epg.maxdays.getValue()) config.epg.maxdays.addNotifier(EpgmaxdaysChanged) config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True) def EpgHistorySecondsChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60) config.epg.histminutes.addNotifier(EpgHistorySecondsChanged) def setHDDStandby(configElement): for hdd in harddiskmanager.HDDList(): hdd[1].setIdleTime(int(configElement.value)) config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False) if SystemInfo["12V_Output"]: def set12VOutput(configElement): Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0) config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False) config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml")) config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml")) config.network = ConfigSubsection() if SystemInfo["WakeOnLAN"]: def wakeOnLANChanged(configElement): if getBoxType() in ('et7000', 'et7500', 'gbx1', 'gbx3', 'et10000', 'gbquadplus', 'gbquad', 'gb800ueplus', 'gb800seplus', 'gbultraue', 'gbultrase', 'gbipbox', 'quadbox2400', 'mutant2400', 'et7x00', 'et8500', 'et8500s'): open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off") else: open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable") config.network.wol = ConfigYesNo(default = False) config.network.wol.addNotifier(wakeOnLANChanged) config.network.Inadyn_autostart = ConfigYesNo(default = False) config.network.OpenVPN_autostart = ConfigYesNo(default = False) config.seek = ConfigSubsection() config.seek.selfdefined_13 = ConfigNumber(default=15) config.seek.selfdefined_46 = ConfigNumber(default=60) config.seek.selfdefined_79 = ConfigNumber(default=300) config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25]) config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.on_pause = ConfigSelection(default = "play", choices = [ ("play", _("Play")), ("step", _("Single step (GOP)")), ("last", _("Last speed")) ]) config.crash = ConfigSubsection() config.crash.details = ConfigYesNo(default = False) debugpath = [('/home/root/logs/', '/home/root/')] for p in harddiskmanager.getMountedPartitions(): if os.path.exists(p.mountpoint): d = os.path.normpath(p.mountpoint) if p.mountpoint != '/': debugpath.append((p.mountpoint + 'logs/', d)) config.crash.debug_path = ConfigSelection(default = "/home/root/logs/", choices = debugpath) if not os.path.exists("/home"): os.mkdir("/home",0755) if not os.path.exists("/home/root"): os.mkdir("/home/root",0755) def updatedebug_path(configElement): if not os.path.exists(config.crash.debug_path.value): try: os.mkdir(config.crash.debug_path.value,0755) except: print "Failed to create log path: %s" % config.crash.debug_path.value config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback = False) crashlogheader = "We are really sorry. Your receiver encountered " \ "a software problem, and needs to be restarted.\n" \ "Please send the logfile %senigma2_crash_xxxxxx.log to http://openspa.info.\n" \ "Your receiver restarts in 10 seconds!\n" \ "Component: enigma2" % config.crash.debug_path.value config.crash.debug_text = ConfigText(default=_(crashlogheader), fixed_size=False) config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))]) def updateEnterForward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_forward, configElement.value) config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False) def updateEnterBackward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_backward, configElement.value) config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False) def updateEraseSpeed(el): eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value)) def updateEraseFlags(el): eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value)) config.misc.erase_speed = ConfigSelection(default="20", choices = [ ("10", "10 MB/s"), ("20", "20 MB/s"), ("50", "50 MB/s"), ("100", "100 MB/s")]) config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False) config.misc.erase_flags = ConfigSelection(default="1", choices = [ ("0", _("Disable")), ("1", _("Internal hdd only")), ("3", _("Everywhere"))]) config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False) if SystemInfo["ZapMode"]: def setZapmode(el): open(SystemInfo["ZapMode"], "w").write(el.value) config.misc.zapmode = ConfigSelection(default = "mute", choices = [ ("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))]) config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False) if SystemInfo["HasForceLNBOn"]: def forceLNBPowerChanged(configElement): open(SystemInfo["HasForceLNBOn"], "w").write(configElement.value) config.misc.forceLnbPower = ConfigSelection(default = "on", choices = [ ("on", _("Yes")), ("off", _("No"))] ) config.misc.forceLnbPower.addNotifier(forceLNBPowerChanged) if SystemInfo["HasForceToneburst"]: def forceToneBurstChanged(configElement): open(SystemInfo["HasForceToneburst"], "w").write(configElement.value) config.misc.forceToneBurst = ConfigSelection(default = "enable", choices = [ ("enable", _("Yes")), ("disable", _("No"))] ) config.misc.forceToneBurst.addNotifier(forceToneBurstChanged) config.subtitles = ConfigSubsection() config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("original")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False) config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50") config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center") config.subtitles.subtitle_rewrap = ConfigYesNo(default = False) config.subtitles.colourise_dialogs = ConfigYesNo(default = False) config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3") config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40") config.subtitles.showbackground = ConfigYesNo(default = False) subtitle_delay_choicelist = [] for i in range(-900000, 1845000, 45000): if i == 0: subtitle_delay_choicelist.append(("0", _("No delay"))) else: subtitle_delay_choicelist.append((str(i), "%2.1f sec" % (i / 90000.))) config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False) config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))]) config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = False) config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [ ("0", _("No transparency")), ("25", "10%"), ("50", "20%"), ("75", "30%"), ("100", "40%"), ("125", "50%"), ("150", "60%"), ("175", "70%"), ("200", "80%"), ("225", "90%"), ("255", _("Full transparency"))]) config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("alternative")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True) config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [ ("1", _("Original")), ("23976", _("23.976")), ("24000", _("24")), ("25000", _("25")), ("29970", _("29.97")), ("30000", _("30"))]) config.subtitles.pango_autoturnon = ConfigYesNo(default = True) config.autolanguage = ConfigSubsection() audio_language_choices=[ ("---", _("None")), ("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")), ("ara", _("Arabic")), ("eus baq", _("Basque")), ("bul", _("Bulgarian")), ("hrv", _("Croatian")), ("chn sgp", _("Simplified Chinese")), ("twn hkn", _("Traditional Chinese")), ("ces cze", _("Czech")), ("dan", _("Danish")), ("dut ndl", _("Dutch")), ("eng qaa", _("English")), ("est", _("Estonian")), ("fin", _("Finnish")), ("fra fre", _("French")), ("deu ger", _("German")), ("ell gre", _("Greek")), ("heb", _("Hebrew")), ("hun", _("Hungarian")), ("ita", _("Italian")), ("lav", _("Latvian")), ("lit", _("Lithuanian")), ("ltz", _("Luxembourgish")), ("nor", _("Norwegian")), ("pol", _("Polish")), ("por dub DUB ud1", _("Portuguese")), ("fas per", _("Persian")), ("ron rum", _("Romanian")), ("rus", _("Russian")), ("srp", _("Serbian")), ("slk slo", _("Slovak")), ("slv", _("Slovenian")), ("spa", _("Spanish")), ("swe", _("Swedish")), ("tha", _("Thai")), ("tur Audio_TUR", _("Turkish"))] def setEpgLanguage(configElement): eServiceEvent.setEPGLanguage(configElement.value) config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage) def setEpgLanguageAlternative(configElement): eServiceEvent.setEPGLanguageAlternative(configElement.value) config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative) config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False) config.autolanguage.audio_defaultddp = ConfigYesNo(default = False) config.autolanguage.audio_usecache = ConfigYesNo(default = True) subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:] config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False) config.autolanguage.subtitle_usecache = ConfigYesNo(default = True) config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [ ("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"), ("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"), ("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"), ("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))]) config.streaming = ConfigSubsection() config.streaming.stream_ecm = ConfigYesNo(default = False) config.streaming.descramble = ConfigYesNo(default = True) config.streaming.descramble_client = ConfigYesNo(default = False) config.streaming.stream_eit = ConfigYesNo(default = True) config.streaming.stream_ait = ConfigYesNo(default = True) config.streaming.authentication = ConfigYesNo(default = False) config.mediaplayer = ConfigSubsection() config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False) config.mediaplayer.alternateUserAgent = ConfigText(default="") #config.osd = ConfigSubsection() config.osd.dst_left = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 720, wraparound = False) config.osd.dst_width = ConfigSelectionNumber(default = 720, stepwidth = 1, min = 0, max = 720, wraparound = False) config.osd.dst_top = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 576, wraparound = False) config.osd.dst_height = ConfigSelectionNumber(default = 576, stepwidth = 1, min = 0, max = 576, wraparound = False) config.osd.alpha = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False) config.osd.alpha_teletext = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False) config.osd.alpha_webbrowser = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False) config.av.osd_alpha = NoSave(ConfigNumber(default = 255)) config.osd.threeDmode = ConfigSelection([("off", _("Off")), ("auto", _("Auto")), ("sidebyside", _("Side by Side")),("topandbottom", _("Top and Bottom"))], "auto") config.osd.threeDznorm = ConfigSlider(default = 50, increment = 1, limits = (0, 100)) config.osd.show3dextensions = ConfigYesNo(default = False) choiceoptions = [("mode1", _("Mode 1")), ("mode2", _("Mode 2"))] config.osd.threeDsetmode = ConfigSelection(default = 'mode1' , choices = choiceoptions )
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=False) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } try: have_analog_output = open("/proc/stb/video/mode_choices", "r").read()[:-1].find("PAL") != -1 except: have_analog_output = False SystemInfo["AnalogOutput"] = have_analog_output # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value and have_analog_output: colorformat_choices["yuv"] = _("YPbPr") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="4_3_letterbox") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") config.av.policy_169 = ConfigSelection( choices={ # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&Scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just Scale") }, default="letterbox") config.av.policy_43 = ConfigSelection( choices={ # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&Scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just Scale") }, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigOnOff(default=True) config.av.defaultac3 = ConfigYesNo(default=False) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 25, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 25, default=0) config.av.vcrswitch = ConfigOnOff(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() try: have_analog_output = open("/proc/stb/video/mode_choices", "r").read()[:-1].find("PAL") != -1 except: have_analog_output = False SystemInfo["AnalogOutput"] = have_analog_output if have_analog_output: # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() try: can_downmix = open("/proc/stb/audio/ac3_choices", "r").read()[:-1].find("downmix") != -1 except: can_downmix = False SystemInfo["CanDownmixAC3"] = can_downmix if can_downmix: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) try: can_osd_alpha = open("/proc/stb/video/alpha", "r") and True or False except: can_osd_alpha = False ac3plus_support = False try: ac3plus_choices = open("/proc/stb/audio/ac3plus_choices", "r").read() if ac3plus_choices.find("use_hdmi_caps") != -1: eDVBServicePMTHandler.setDDPSupport(True) if ac3plus_choices.find("force_ac3") != -1: ac3plus_support = True except: pass SystemInfo["SupportsAC3PlusTranscode"] = ac3plus_support if ac3plus_support: def setAC3PlusConvert(configElement): open("/proc/stb/audio/ac3plus", "w").write(configElement.value) config.av.convert_ac3plus = ConfigSelection(choices=[ ("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("always")) ], default="use_hdmi_caps") config.av.convert_ac3plus.addNotifier(setAC3PlusConvert) SystemInfo["CanChangeOsdAlpha"] = can_osd_alpha def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) if can_osd_alpha: config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if os_path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) try: hlg_choices = open("/proc/stb/hdmi/hlg_support_choices", "r").read() def setHlgSupport(configElement): open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value) config.av.hlg_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hlg_support.addNotifier(setHlgSupport) def setHdr10Support(configElement): open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value) config.av.hdr10_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hdr10_support.addNotifier(setHdr10Support) def setDisable12Bit(configElement): open("/proc/stb/video/disable_12bit", "w").write(configElement.value) config.av.allow_12bit = ConfigSelection(default="0", choices=[("0", _("yes")), ("1", _("no"))]) config.av.allow_12bit.addNotifier(setDisable12Bit) def setDisable10Bit(configElement): open("/proc/stb/video/disable_10bit", "w").write(configElement.value) config.av.allow_10bit = ConfigSelection(default="0", choices=[("0", _("yes")), ("1", _("no"))]) config.av.allow_10bit.addNotifier(setDisable10Bit) SystemInfo["HDRSupport"] = True except: SystemInfo["HDRSupport"] = False
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 Pan&scan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 Pan&scan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale"), "zoom": _("Zoom") } if os.path.exists( "/usr/local/e2/etc/stb/video/policy2_choices") and "auto" in open( "/usr/local/e2/etc/stb/video/policy2_choices").readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale"), "zoom": _("Zoom") } if os.path.exists( eEnv.resolve("${sysconfdir}/stb/video/policy_choices") ) and "auto" in open( eEnv.resolve("${sysconfdir}/stb/video/policy_choices")).readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) config.av.policy_43 = ConfigSelection(choices=policy_choices, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() try: can_downmix = "downmix" in open( eEnv.resolve("${sysconfdir}/stb/audio/ac3_choices"), "r").read() except: can_downmix = False SystemInfo["CanDownmixAC3"] = can_downmix if can_downmix: def setAC3Downmix(configElement): open(eEnv.resolve("${sysconfdir}/stb/audio/ac3"), "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) can_downmix = os.path.exists("/usr/lib/gstreamer-0.10/libgstdtsdec.so") SystemInfo["CanDownmixDTS"] = can_downmix if can_downmix: def setDTSDownmix(configElement): open(eEnv.resolve("${sysconfdir}/stb/dts_mode"), "w").write(configElement.value and "downmix" or "passthrough") try: os.unlink('/home/root/.gstreamer-0.10/registry.mipsel.bin') except: pass config.av.downmix_dts = ConfigYesNo(default=False) config.av.downmix_dts.addNotifier(setDTSDownmix) try: can_osd_alpha = open(eEnv.resolve("${sysconfdir}/stb/video/alpha"), "r") and True or False except: can_osd_alpha = False SystemInfo["CanChangeOsdAlpha"] = can_osd_alpha def setAlpha(config): open(eEnv.resolve("${sysconfdir}/stb/video/alpha"), "w").write(str(config.value)) if can_osd_alpha: config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if os.path.exists( eEnv.resolve("${sysconfdir}/stb/vmpeg/0/pep_scaler_sharpness")): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open( eEnv.resolve( "${sysconfdir}/stb/vmpeg/0/pep_scaler_sharpness"), "w").write("%0.8X" % myval) open(eEnv.resolve("${sysconfdir}/stb/vmpeg/0/pep_apply"), "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing())
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup if getBoxType() in ('gbquad', 'gbquadplus', 'gb800seplus', 'gb800ueplus', 'gbipbox', 'gbultra', 'gbultraue', 'gbultrase', 'tomcat', 'gbx1'): detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVulume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices=choice_list, default="none") config.av.autovolume.addNotifier(setAutoVulume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: SystemInfo["CanDownmixAC3"] = "downmix" in open( "/proc/stb/audio/ac3_choices", "r").read() except: SystemInfo["CanDownmixAC3"] = False if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) try: SystemInfo["CanDownmixDTS"] = "downmix" in open( "/proc/stb/audio/dts_choices", "r").read() except: SystemInfo["CanDownmixDTS"] = False if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: SystemInfo["CanDownmixAAC"] = "downmix" in open( "/proc/stb/audio/aac_choices", "r").read() except: SystemInfo["CanDownmixAAC"] = False if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() try: SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False except: SystemInfo["CanChangeOsdAlpha"] = False if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, increment=5, limits=(20, 255)) config.av.osd_alpha.addNotifier(setAlpha) if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=True)
def InitAVSwitch(): if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'): config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) config.av.osd_alpha = ConfigSlider(default=255, increment = 5, limits=(20,255)) # Make openSPA compatible with some plugins who still use config.av.osd_alpha colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")} # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={"disabled": _("Disabled"), "simple": _("Simple"), "native": _("Native"), "all": _("All resolutions"), "hd": _("only HD")}, default="disabled") config.av.autores_preview = NoSave(ConfigYesNo(default=False)) config.av.autores_1080i_deinterlace = ConfigYesNo(default=False) choicelist = { "24,24": _("24p/24p"), "24,25": _("24p/25p"), "24,30": _("24p/30p"), "24,50": _("24p/50p"), "24,60": _("24p/60p"), "25,24": _("25p/24p"), "30,24": _("30p/24p"), "50,24": _("50p/24p"), "60,24": _("60p/24p"), "25,25": _("25p/25p"), "25,30": _("25p/30p"), "25,50": _("25p/50p"), "25,60": _("25p/60p"), "30,25": _("30p/25p"), "50,25": _("50p/25p"), "60,25": _("60p/25p"), "30,30": _("30p/30p"), "30,50": _("30p/50p"), "30,60": _("30p/60p"), "50,30": _("50p/30p"), "60,30": _("60p/30p"), "50,50": _("50p/50p"), "50,60": _("50p/60p"), "60,50": _("60p/50p"), "60,60": _("60p/60p") } # first value <=720p , second value > 720p config.av.autores_24p = ConfigSelection(choices=choicelist, default="50,24") config.av.autores_25p = ConfigSelection(choices=choicelist, default="50,25") config.av.autores_30p = ConfigSelection(choices=choicelist, default="60,30") config.av.autores_unknownres = ConfigSelection(choices={"next": _("next higher Resolution"), "highest": _("highest Resolution")}, default="next") choicelist = [] for i in range(5, 16): choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection(default = "5", choices = [("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min = 0, max = 3000, stepwidth = 50, default = 400, wraparound = True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={"720p50": _("720p50"), "720p": _("720p"), "1080i50": _("1080i50"), "1080i": _("1080i")}, default="720p50") config.av.autores_480p24 = ConfigSelection(choices={"480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz")}, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={"720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz"), "1080i50": _("1080i 50Hz"), "1080i": _("1080i 60Hz")}, default="720p24") config.av.autores_1080p24 = ConfigSelection(choices={"1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz"), "1080i50": _("1080p 50Hz"), "1080i": _("1080i 60Hz")}, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={"1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz"), "1080i50": _("1080i 50Hz")}, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={"1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz"), "1080i": _("1080i 60Hz")}, default="1080p30") config.av.smart1080p = ConfigSelection(choices={"false": _("off"), "true": _("1080p50: 24p/50p/60p"), "2160p50": _("2160p50: 24p/50p/60p"), "1080i50": _("1080i50: 24p/50i/60i"), "720p50": _("720p50: 24p/50p/60p")}, default="false") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox")}, default = "16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic")}, default = "16:9") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale")} if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale")} if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "panscan") config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal") config.av.wss = ConfigEnableDisable(default = True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.vcrswitch = ConfigEnableDisable(default = False) #config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ("YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA"): iAVSwitch.setColorFormat(0) else: if getBoxType() == 'et6x00': map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif getBoxType() == 'gbquad' or getBoxType() == 'gbquadplus' or getBoxType().startswith('et'): map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6} iAVSwitch.setAspectRatio(map[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero', 'axodin', 'axodinc', 'starsatlx', 'galaxym6', 'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2', 'gb800seplus', 'gb800ueplus', 'gbultrase', 'gbultraue' , 'twinboxlcd' )) or about.getModelString() == 'et6000': detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on")}, default = "00000001") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorspace"): f = open("/proc/stb/video/hdmi_colorspace", "r") have_colorspace = f.read().strip().split(" ") f.close() else: have_colorspace = False SystemInfo["havecolorspace"] = have_colorspace if have_colorspace: def setHDMIColorspace(configElement): try: f = open("/proc/stb/video/hdmi_colorspace", "w") f.write(configElement.value) f.close() except: pass if getBoxType() in ('vusolo4k','vuuno4k','vuultimo4k'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420")}, default = "Edid(Auto)") elif getBoxType() in ('dm900'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "Itu_R_BT_709": _("BT709"), "DVI_Full_Range_RGB": _("Full Range RGB"), "FCC": _("FCC 1953"), "Itu_R_BT_470_2_BG": _("BT470 BG"), "Smpte_170M": _("Smpte 170M"), "Smpte_240M": _("Smpte 240M"), "Itu_R_BT_2020_NCL": _("BT2020 NCL"), "Itu_R_BT_2020_CL": _("BT2020 CL"), "XvYCC_709": _("BT709 XvYCC"), "XvYCC_601": _("BT601 XvYCC")}, default = "Edid(Auto)") else: config.av.hdmicolorspace = ConfigSelection(choices={ "auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444")}, default = "auto") config.av.hdmicolorspace.addNotifier(setHDMIColorspace) else: config.av.hdmicolorspace = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorimetry"): f = open("/proc/stb/video/hdmi_colorimetry", "r") have_colorimetry = f.read().strip().split(" ") f.close() else: have_colorimetry = False SystemInfo["havecolorimetry"] = have_colorimetry if have_colorimetry: def setHDMIColorimetry(configElement): sleep(0.1) try: f = open("/proc/stb/video/hdmi_colorimetry", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolorimetry = ConfigSelection(choices={ "auto": _("auto"), "bt2020ncl": _("BT 2020 NCL"), "bt2020cl": _("BT 2020 CL"), "bt709": _("BT 709")}, default = "auto") config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry) else: config.av.hdmicolorimetry = ConfigNothing() if os.path.exists("/proc/stb/info/boxmode"): f = open("/proc/stb/info/boxmode", "r") have_boxmode = f.read().strip().split(" ") f.close() else: have_boxmode = False SystemInfo["haveboxmode"] = have_boxmode if have_boxmode: def setBoxmode(configElement): try: f = open("/proc/stb/info/boxmode", "w") f.write(configElement.value) f.close() except: pass config.av.boxmode = ConfigSelection(choices={ "12": _("enable PIP no HDR"), "1": _("12bit 4:2:0/4:2:2 no PIP")}, default = "12") config.av.boxmode.addNotifier(setBoxmode) else: config.av.boxmode = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colordepth"): f = open("/proc/stb/video/hdmi_colordepth", "r") have_HdmiColordepth = f.read().strip().split(" ") f.close() else: have_HdmiColordepth = False SystemInfo["havehdmicolordepth"] = have_HdmiColordepth if have_HdmiColordepth: def setHdmiColordepth(configElement): try: f = open("/proc/stb/video/hdmi_colordepth", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolordepth = ConfigSelection(choices={ "auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit")}, default = "auto") config.av.hdmicolordepth.addNotifier(setHdmiColordepth) else: config.av.hdmicolordepth = ConfigNothing() if os.path.exists("/proc/stb/hdmi/audio_source"): f = open("/proc/stb/hdmi/audio_source", "r") can_audiosource = f.read().strip().split(" ") f.close() else: can_audiosource = False SystemInfo["Canaudiosource"] = can_audiosource if can_audiosource: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF")}, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices = choice_list, default = "none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices = choice_list, default = "center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices = choice_list, default = "none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default = False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: f = open("/proc/stb/audio/ac3_choices", "r") file = f.read()[:-1] f.close() can_downmix_ac3 = "downmix" in file except: can_downmix_ac3 = False SystemInfo["CanPcmMultichannel"] = False SystemInfo["CanDownmixAC3"] = can_downmix_ac3 if can_downmix_ac3: def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) config.av.downmix_ac3 = ConfigYesNo(default = True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if os.path.exists("/proc/stb/audio/ac3plus_choices"): f = open("/proc/stb/audio/ac3plus_choices", "r") can_ac3plustranscode = f.read().strip().split(" ") f.close() else: can_ac3plustranscode = False SystemInfo["CanAC3plusTranscode"] = can_ac3plustranscode if can_ac3plustranscode: def setAC3plusTranscode(configElement): f = open("/proc/stb/audio/ac3plus", "w") f.write(configElement.value) f.close() choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("always"))] config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "use_hdmi_caps") config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) try: f = open("/proc/stb/audio/dts_choices", "r") file = f.read()[:-1] f.close() can_downmix_dts = "downmix" in file except: can_downmix_dts = False SystemInfo["CanDownmixDTS"] = can_downmix_dts if can_downmix_dts: def setDTSDownmix(configElement): f = open("/proc/stb/audio/dts", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_dts = ConfigYesNo(default = True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: f = open("/proc/stb/audio/aac_choices", "r") file = f.read()[:-1] f.close() can_downmix_aac = "downmix" in file except: can_downmix_aac = False SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_aac = ConfigYesNo(default = True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices = choice_list, default = "off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoMode] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0,26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default = False) iAVSwitch.setConfiguredMode()
def InitRecordingConfig(): config.recording = ConfigSubsection() # actually this is "recordings always have priority". "Yes" does mean: don't ask. The RecordTimer will ask when value is 0. config.recording.asktozap = ConfigYesNo(default=True) config.recording.margin_before = ConfigSelectionNumber(min=0, max=120, stepwidth=1, default=3, wraparound=True) config.recording.margin_after = ConfigSelectionNumber(min=0, max=120, stepwidth=1, default=5, wraparound=True) config.recording.ascii_filenames = ConfigYesNo(default=False) config.recording.keep_timers = ConfigSelectionNumber(min=1, max=120, stepwidth=1, default=7, wraparound=True) config.recording.filename_composition = ConfigSelection( default="standard", choices=[("standard", _("standard")), ("event", _("Event name first")), ("short", _("Short filenames")), ("veryshort", _("Very short filenames")), ("veryveryshort", _("Very very short filenames")), ("long", _("Long filenames"))]) config.recording.always_ecm = ConfigYesNo(default=False) config.recording.never_decrypt = ConfigYesNo(default=False) config.recording.offline_decode_delay = ConfigSelectionNumber( min=1, max=10000, stepwidth=10, default=1000, wraparound=True) config.recording.ecm_data = ConfigSelection(choices=[ ("normal", _("normal")), ("descrambled+ecm", _("descramble and record ecm")), ("scrambled+ecm", _("don't descramble, record ecm")) ], default="normal") config.recording.default_timertype = ConfigSelection(choices=[ ("zap", _("zap")), ("record", _("record")), ("zap+record", _("zap and record")) ], default="record") if SystemInfo["DeepstandbySupport"]: shutdownString = _("go to deep standby") else: shutdownString = _("shut down") config.recording.default_afterevent = ConfigSelection(choices=[ ("0", _("do nothing")), ("1", _("go to standby")), ("2", shutdownString), ("3", _("auto")) ], default="3") config.recording.include_ait = ConfigYesNo(default=True) config.recording.show_rec_symbol_for_rec_types = ConfigSelection( choices=[("any", _("any recordings")), ("real", _("real recordings")), ("real_streaming", _("real recordings or streaming")), ("real_pseudo", _("real or pseudo recordings"))], default="real_streaming") config.recording.warn_box_restart_rec_types = ConfigSelection( choices=[("any", _("any recordings")), ("real", _("real recordings")), ("real_streaming", _("real recordings or streaming")), ("real_pseudo", _("real or pseudo recordings"))], default="real_streaming") config.recording.ask_to_abort_pseudo_rec = ConfigSelection( choices=[("ask", _("ask user")), ("abort_no_msg", _("just abort, no message")), ("abort_msg", _("just abort, show message")), ("never_abort", _("never abort"))], default="abort_msg") config.recording.ask_to_abort_streaming = ConfigSelection( choices=[("ask", _("ask user")), ("abort_no_msg", _("just abort, no message")), ("abort_msg", _("just abort, show message")), ("never_abort", _("never abort"))], default="abort_msg") config.recording.ask_to_abort_pip = ConfigSelection(choices=[ ("ask", _("ask user")), ("abort_no_msg", _("just abort, no message")), ("abort_msg", _("just abort, show message")), ("never_abort", _("never abort")) ], default="abort_msg") config.recording.prepare_time = ConfigSelectionNumber(min=20, max=120, stepwidth=10, default=20, wraparound=True)
def InitUsageConfig(): config.usage = ConfigSubsection() config.usage.showdish = ConfigYesNo(default=True) config.usage.multibouquet = ConfigYesNo(default=True) config.usage.alternative_number_mode = ConfigYesNo(default=False) def alternativeNumberModeChange(configElement): eDVBDB.getInstance().setNumberingMode(configElement.value) refreshServiceList() config.usage.alternative_number_mode.addNotifier( alternativeNumberModeChange) config.usage.hide_number_markers = ConfigYesNo(default=True) config.usage.hide_number_markers.addNotifier(refreshServiceList) config.usage.servicetype_icon_mode = ConfigSelection( default="0", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.servicetype_icon_mode.addNotifier(refreshServiceList) config.usage.crypto_icon_mode = ConfigSelection( default="0", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.crypto_icon_mode.addNotifier(refreshServiceList) config.usage.record_indicator_mode = ConfigSelection( default="0", choices=[("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))]) config.usage.record_indicator_mode.addNotifier(refreshServiceList) choicelist = [("-1", _("Devide")), ("0", _("Disable"))] for i in range(100, 1300, 100): choicelist.append( ("%d" % i, ngettext("%d pixel wide", "%d pixels wide", i) % i)) config.usage.servicelist_column = ConfigSelection(default="0", choices=choicelist) config.usage.servicelist_column.addNotifier(refreshServiceList) config.usage.service_icon_enable = ConfigYesNo(default=False) config.usage.service_icon_enable.addNotifier(refreshServiceList) config.usage.servicelist_cursor_behavior = ConfigSelection( default="standard", choices=[("standard", _("Standard")), ("keep", _("Keep service")), ("reverseB", _("Reverse bouquet buttons")), ("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))]) config.usage.multiepg_ask_bouquet = ConfigYesNo(default=False) config.usage.quickzap_bouquet_change = ConfigYesNo(default=False) config.usage.e1like_radio_mode = ConfigYesNo(default=True) choicelist = [("0", _("No timeout"))] for i in range(1, 12): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.usage.infobar_timeout = ConfigSelection(default="5", choices=choicelist) config.usage.show_infobar_on_zap = ConfigYesNo(default=True) config.usage.show_infobar_on_skip = ConfigYesNo(default=True) config.usage.show_infobar_on_event_change = ConfigYesNo(default=False) config.usage.show_second_infobar = ConfigSelection( default=None, choices=[(None, _("None"))] + choicelist + [("EPG", _("EPG"))]) config.usage.infobar_frontend_source = ConfigSelection( default="tuner", choices=[("settings", _("Settings")), ("tuner", _("Tuner"))]) config.usage.oldstyle_zap_controls = ConfigYesNo(default=False) config.usage.oldstyle_channel_select_controls = ConfigYesNo(default=False) config.usage.zap_with_ch_buttons = ConfigYesNo(default=False) config.usage.ok_is_channelselection = ConfigYesNo(default=False) config.usage.show_spinner = ConfigYesNo(default=True) config.usage.enable_tt_caching = ConfigYesNo(default=True) choicelist = [] for i in (10, 30): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300, 600, 1200, 1800): m = i / 60 choicelist.append( ("%d" % i, ngettext("%d minute", "%d minutes", m) % m)) for i in (3600, 7200, 14400): h = i / 3600 choicelist.append(("%d" % i, ngettext("%d hour", "%d hours", h) % h)) config.usage.hdd_standby = ConfigSelection( default="300", choices=[("0", _("No standby"))] + choicelist) config.usage.output_12V = ConfigSelection(default="do not change", choices=[("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On"))]) config.usage.pip_zero_button = ConfigSelection( default="standard", choices=[("standard", _("Standard")), ("swap", _("Swap PiP and main picture")), ("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP"))]) config.usage.pip_hideOnExit = ConfigSelection(default="without popup", choices=[("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ]) choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))] for i in [60, 300, 600, 900, 1800, 2700, 3600]: m = i / 60 choicelist.append( ("%d" % i, ngettext("%d minute", "%d minutes", m) % m)) config.usage.pip_last_service_timeout = ConfigSelection(default="0", choices=choicelist) config.usage.default_path = ConfigText(default=resolveFilename(SCOPE_HDD)) config.usage.timer_path = ConfigText(default="<default>") config.usage.instantrec_path = ConfigText(default="<default>") config.usage.timeshift_path = ConfigText(default="/media/hdd/") config.usage.allowed_timeshift_paths = ConfigLocations( default=["/media/hdd/"]) config.cccaminfo = ConfigSubsection() config.cccaminfo.showInExtensions = ConfigYesNo(default=False) config.cccaminfo.serverNameLength = ConfigSelectionNumber(min=10, max=100, stepwidth=1, default=22, wraparound=True) config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False) config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False) config.cccaminfo.username = ConfigText(default="", fixed_size=False) config.cccaminfo.password = ConfigText(default="", fixed_size=False) config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535)) config.cccaminfo.profile = ConfigText(default="", fixed_size=False) config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True) config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min=1, max=10, stepwidth=1, default=5, wraparound=True) config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True) config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50) config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50) config.cccaminfo.blacklist = ConfigText( default="/media/cf/CCcamInfo.blacklisted", fixed_size=False) config.cccaminfo.profiles = ConfigText( default="/media/cf/CCcamInfo.profiles", fixed_size=False) config.oscaminfo = ConfigSubsection() config.oscaminfo.showInExtensions = ConfigYesNo(default=False) config.oscaminfo.userdatafromconf = ConfigYesNo(default=False) config.oscaminfo.autoupdate = ConfigYesNo(default=False) config.oscaminfo.username = ConfigText(default="username", fixed_size=False, visible_width=12) config.oscaminfo.password = ConfigPassword(default="password", fixed_size=False) config.oscaminfo.ip = ConfigIP(default=[127, 0, 0, 1], auto_jump=True) config.oscaminfo.port = ConfigInteger(default=16002, limits=(0, 65536)) config.oscaminfo.intervall = ConfigSelectionNumber(min=1, max=600, stepwidth=1, default=10, wraparound=True) SystemInfo["OScamInstalled"] = False config.usage.movielist_trashcan = ConfigYesNo(default=True) config.usage.movielist_trashcan_days = ConfigNumber(default=8) config.usage.movielist_trashcan_reserve = ConfigNumber(default=40) config.usage.on_movie_start = ConfigSelection( default="resume", choices=[("ask", _("Ask user")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning"))]) config.usage.on_movie_stop = ConfigSelection( default="movielist", choices=[("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service"))]) config.usage.on_movie_eof = ConfigSelection( default="movielist", choices=[("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")), ("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))]) config.usage.next_movie_msg = ConfigYesNo(default=True) config.usage.last_movie_played = ConfigText() config.usage.leave_movieplayer_onExit = ConfigSelection( default="popup", choices=[("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup"))]) config.usage.setup_level = ConfigSelection(default="expert", choices=[ ("simple", _("Simple")), ("intermediate", _("Intermediate")), ("expert", _("Expert")) ]) config.usage.startup_to_standby = ConfigYesNo(default=False) config.usage.on_long_powerpress = ConfigSelection( default="show_menu", choices=[("show_menu", _("Show shutdown menu")), ("shutdown", _("Immediate shutdown")), ("standby", _("Standby"))]) config.usage.on_short_powerpress = ConfigSelection( default="standby", choices=[("show_menu", _("Show shutdown menu")), ("shutdown", _("Immediate shutdown")), ("standby", _("Standby"))]) choicelist = [("0", _("Do nothing"))] for i in range(3600, 21601, 3600): h = abs(i / 3600) h = ngettext("%d hour", "%d hours", h) % h choicelist.append(("%d" % i, _("Standby in ") + h)) config.usage.inactivity_timer = ConfigSelection(default="0", choices=choicelist) config.usage.inactivity_timer_blocktime = ConfigYesNo(default=True) config.usage.inactivity_timer_blocktime_begin = ConfigClock( default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end = ConfigClock( default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled")), ("event_standby", _("Standby after current event"))] for i in range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append(("%d" % i, _("Standby in ") + m)) config.usage.sleep_timer = ConfigSelection(default="0", choices=choicelist) choicelist = [("0", _("Disabled"))] for i in [60, 300, 600] + range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append(("%d" % i, _("after ") + m)) config.usage.standby_to_shutdown_timer = ConfigSelection( default="0", choices=choicelist) config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo( default=True) config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock( default=time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock( default=time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled"))] for i in (5, 30, 60, 300, 600, 900, 1200, 1800, 2700, 3600): if i < 60: m = ngettext("%d second", "%d seconds", i) % i else: m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append(("%d" % i, m)) config.usage.screen_saver = ConfigSelection(default="60", choices=choicelist) config.usage.check_timeshift = ConfigYesNo(default=True) choicelist = [("0", _("Disabled"))] for i in (2, 3, 4, 5, 10, 20, 30): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300): m = i / 60 choicelist.append( ("%d" % i, ngettext("%d minute", "%d minutes", m) % m)) config.usage.timeshift_start_delay = ConfigSelection(default="0", choices=choicelist) config.usage.alternatives_priority = ConfigSelection( default="0", choices=[("0", "DVB-S/-C/-T"), ("1", "DVB-S/-T/-C"), ("2", "DVB-C/-S/-T"), ("3", "DVB-C/-T/-S"), ("4", "DVB-T/-C/-S"), ("5", "DVB-T/-S/-C")]) nims = [("-1", _("auto"))] for x in nimmanager.nim_slots: nims.append((str(x.slot), x.getSlotName())) config.usage.frontend_priority = ConfigSelection(default="-1", choices=list(nims)) nims.insert(0, ("-2", _("Disabled"))) config.usage.recording_frontend_priority = ConfigSelection(default="-2", choices=nims) config.misc.disable_background_scan = ConfigYesNo(default=False) config.usage.show_event_progress_in_servicelist = ConfigSelection( default='barright', choices=[('barleft', _("Progress bar left")), ('barright', _("Progress bar right")), ('percleft', _("Percentage left")), ('percright', _("Percentage right")), ('no', _("No"))]) config.usage.show_channel_numbers_in_servicelist = ConfigYesNo( default=True) config.usage.show_event_progress_in_servicelist.addNotifier( refreshServiceList) config.usage.show_channel_numbers_in_servicelist.addNotifier( refreshServiceList) config.usage.blinking_display_clock_during_recording = ConfigYesNo( default=False) config.usage.show_message_when_recording_starts = ConfigYesNo(default=True) config.usage.load_length_of_movies_in_moviellist = ConfigYesNo( default=True) config.usage.show_icons_in_movielist = ConfigSelection( default='i', choices=[ ('o', _("Off")), ('p', _("Progress")), ('s', _("Small progress")), ('i', _("Icons")), ]) config.usage.movielist_unseen = ConfigYesNo(default=False) config.usage.swap_snr_on_osd = ConfigYesNo(default=False) def SpinnerOnOffChanged(configElement): setSpinnerOnOff(int(configElement.value)) config.usage.show_spinner.addNotifier(SpinnerOnOffChanged) def EnableTtCachingChanged(configElement): setEnableTtCachingOnOff(int(configElement.value)) config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged) def TunerTypePriorityOrderChanged(configElement): setTunerTypePriorityOrder(int(configElement.value)) config.usage.alternatives_priority.addNotifier( TunerTypePriorityOrderChanged, immediate_feedback=False) def PreferredTunerChanged(configElement): setPreferredTuner(int(configElement.value)) config.usage.frontend_priority.addNotifier(PreferredTunerChanged) config.usage.hide_zap_errors = ConfigYesNo(default=True) config.usage.hide_ci_messages = ConfigYesNo(default=True) config.usage.show_cryptoinfo = ConfigYesNo(default=True) config.usage.show_eit_nownext = ConfigYesNo(default=True) config.usage.show_vcr_scart = ConfigYesNo(default=False) config.usage.show_update_disclaimer = ConfigYesNo(default=True) config.usage.pic_resolution = ConfigSelection( default=None, choices=[(None, _("Same resolution as skin")), ("(720, 576)", "720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")]) if SystemInfo["Fan"]: choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))] if os.path.exists("/proc/stb/fp/fan_choices"): choicelist = [ x for x in choicelist if x[0] in open( "/proc/stb/fp/fan_choices", "r").read().strip().split(" ") ] config.usage.fan = ConfigSelection(choicelist) def fanChanged(configElement): open(SystemInfo["Fan"], "w").write(configElement.value) config.usage.fan.addNotifier(fanChanged) if SystemInfo["FanPWM"]: def fanSpeedChanged(configElement): open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:]) config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255)) config.usage.fanspeed.addNotifier(fanSpeedChanged) if SystemInfo["StandbyLED"]: def standbyLEDChanged(configElement): open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off") config.usage.standbyLED = ConfigYesNo(default=True) config.usage.standbyLED.addNotifier(standbyLEDChanged) if SystemInfo["WakeOnLAN"]: def wakeOnLANChanged(configElement): if "fb" in SystemInfo["WakeOnLAN"]: open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable") else: open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off") config.usage.wakeOnLAN = ConfigYesNo(default=False) config.usage.wakeOnLAN.addNotifier(wakeOnLANChanged) config.epg = ConfigSubsection() config.epg.eit = ConfigYesNo(default=True) config.epg.mhw = ConfigYesNo(default=False) config.epg.freesat = ConfigYesNo(default=True) config.epg.viasat = ConfigYesNo(default=True) config.epg.netmed = ConfigYesNo(default=True) config.epg.virgin = ConfigYesNo(default=False) config.misc.showradiopic = ConfigYesNo(default=True) def EpgSettingsChanged(configElement): from enigma import eEPGCache mask = 0xffffffff if not config.epg.eit.value: mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER) if not config.epg.mhw.value: mask &= ~eEPGCache.MHW if not config.epg.freesat.value: mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER) if not config.epg.viasat.value: mask &= ~eEPGCache.VIASAT if not config.epg.netmed.value: mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER) if not config.epg.virgin.value: mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE) eEPGCache.getInstance().setEpgSources(mask) config.epg.eit.addNotifier(EpgSettingsChanged) config.epg.mhw.addNotifier(EpgSettingsChanged) config.epg.freesat.addNotifier(EpgSettingsChanged) config.epg.viasat.addNotifier(EpgSettingsChanged) config.epg.netmed.addNotifier(EpgSettingsChanged) config.epg.virgin.addNotifier(EpgSettingsChanged) config.epg.histminutes = ConfigSelectionNumber(min=0, max=120, stepwidth=15, default=0, wraparound=True) def EpgHistorySecondsChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgHistorySeconds( config.epg.histminutes.getValue() * 60) config.epg.histminutes.addNotifier(EpgHistorySecondsChanged) def setHDDStandby(configElement): for hdd in harddiskmanager.HDDList(): hdd[1].setIdleTime(int(configElement.value)) config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False) if SystemInfo["12V_Output"]: def set12VOutput(configElement): Misc_Options.getInstance().set_12V_output( configElement.value == "on" and 1 or 0) config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False) config.usage.keymap = ConfigText( default=eEnv.resolve("${datadir}/enigma2/keymap.xml")) config.seek = ConfigSubsection() config.seek.selfdefined_13 = ConfigNumber(default=15) config.seek.selfdefined_46 = ConfigNumber(default=60) config.seek.selfdefined_79 = ConfigNumber(default=300) config.seek.speeds_forward = ConfigSet( default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_backward = ConfigSet( default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25]) config.seek.enter_forward = ConfigSelection(default="2", choices=[ "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128" ]) config.seek.enter_backward = ConfigSelection(default="1", choices=[ "1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128" ]) config.seek.on_pause = ConfigSelection(default="play", choices=[("play", _("Play")), ("step", _("Single step (GOP)")), ("last", _("Last speed"))]) config.crash = ConfigSubsection() config.crash.details = ConfigYesNo(default=False) config.usage.timerlist_finished_timer_position = ConfigSelection( default="end", choices=[("beginning", _("At beginning")), ("end", _("At end"))]) def updateEnterForward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_forward, configElement.value) config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback=False) def updateEnterBackward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_backward, configElement.value) config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback=False) def updateEraseSpeed(el): eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value)) def updateEraseFlags(el): eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value)) config.misc.erase_speed = ConfigSelection(default="20", choices=[("10", "10 MB/s"), ("20", "20 MB/s"), ("50", "50 MB/s"), ("100", "100 MB/s")]) config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback=False) config.misc.erase_flags = ConfigSelection(default="1", choices=[ ("0", _("Disable")), ("1", _("Internal hdd only")), ("3", _("Everywhere")) ]) config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback=False) if SystemInfo["ZapMode"]: def setZapmode(el): open(SystemInfo["ZapMode"], "w").write(el.value) config.misc.zapmode = ConfigSelection( default="mute", choices=[("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))]) config.misc.zapmode.addNotifier(setZapmode, immediate_feedback=False) config.subtitles = ConfigSubsection() config.subtitles.ttx_subtitle_colors = ConfigSelection( default="1", choices=[("0", _("original")), ("1", _("white")), ("2", _("yellow"))]) config.subtitles.ttx_subtitle_original_position = ConfigYesNo( default=False) config.subtitles.subtitle_position = ConfigSelection(choices=[ "0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450" ], default="50") config.subtitles.subtitle_alignment = ConfigSelection(choices=[ ("left", _("left")), ("center", _("center")), ("right", _("right")) ], default="center") config.subtitles.subtitle_rewrap = ConfigYesNo(default=False) config.subtitles.subtitle_borderwidth = ConfigSelection( choices=["1", "2", "3", "4", "5"], default="3") config.subtitles.subtitle_fontsize = ConfigSelection(choices=[ "16", "18", "20", "22", "24", "26", "28", "30", "32", "34", "36", "38", "40", "42", "44", "46", "48", "50", "52", "54" ], default="34") subtitle_delay_choicelist = [] for i in range(-900000, 1845000, 45000): if i == 0: subtitle_delay_choicelist.append(("0", _("No delay"))) else: subtitle_delay_choicelist.append( ("%d" % i, "%2.1f sec" % (i / 90000.))) config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection( default="315000", choices=subtitle_delay_choicelist) config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default=False) config.subtitles.dvb_subtitles_original_position = ConfigSelection( default="0", choices=[("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))]) config.subtitles.dvb_subtitles_centered = ConfigYesNo(default=True) config.subtitles.subtitle_bad_timing_delay = ConfigSelection( default="0", choices=subtitle_delay_choicelist) config.subtitles.dvb_subtitles_backtrans = ConfigSelection( default="0", choices=[("0", _("No transparency")), ("25", "10%"), ("50", "20%"), ("75", "30%"), ("100", "40%"), ("125", "50%"), ("150", "60%"), ("175", "70%"), ("200", "80%"), ("225", "90%"), ("255", _("Full transparency"))]) config.subtitles.pango_subtitle_colors = ConfigSelection( default="0", choices=[("0", _("alternative")), ("1", _("white")), ("2", _("yellow"))]) config.subtitles.pango_subtitles_delay = ConfigSelection( default="0", choices=subtitle_delay_choicelist) config.subtitles.pango_subtitles_fps = ConfigSelection( default="1", choices=[("1", _("Original")), ("23976", _("23.976")), ("24000", _("24")), ("25000", _("25")), ("29970", _("29.97")), ("30000", _("30"))]) config.subtitles.pango_autoturnon = ConfigYesNo(default=True) config.autolanguage = ConfigSubsection() audio_language_choices = [ ("---", _("None")), ("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")), ("ara", _("Arabic")), ("eus baq", _("Basque")), ("bul", _("Bulgarian")), ("hrv", _("Croatian")), ("ces cze", _("Czech")), ("dan", _("Danish")), ("dut ndl", _("Dutch")), ("eng qaa", _("English")), ("est", _("Estonian")), ("fin", _("Finnish")), ("fra fre", _("French")), ("deu ger", _("German")), ("ell gre", _("Greek")), ("heb", _("Hebrew")), ("hun", _("Hungarian")), ("ita", _("Italian")), ("lav", _("Latvian")), ("lit", _("Lithuanian")), ("ltz", _("Luxembourgish")), ("nor", _("Norwegian")), ("pol", _("Polish")), ("por", _("Portuguese")), ("fas per", _("Persian")), ("ron rum", _("Romanian")), ("rus", _("Russian")), ("srp", _("Serbian")), ("slk slo", _("Slovak")), ("slv", _("Slovenian")), ("spa", _("Spanish")), ("swe", _("Swedish")), ("tha", _("Thai")), ("tur Audio_TUR", _("Turkish")) ] def setEpgLanguage(configElement): eServiceEvent.setEPGLanguage(configElement.value) config.autolanguage.audio_epglanguage = ConfigSelection( audio_language_choices[:1] + audio_language_choices[2:], default="---") config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage) def setEpgLanguageAlternative(configElement): eServiceEvent.setEPGLanguageAlternative(configElement.value) config.autolanguage.audio_epglanguage_alternative = ConfigSelection( audio_language_choices[:1] + audio_language_choices[2:], default="---") config.autolanguage.audio_epglanguage_alternative.addNotifier( setEpgLanguageAlternative) config.autolanguage.audio_autoselect1 = ConfigSelection( choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect2 = ConfigSelection( choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect3 = ConfigSelection( choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect4 = ConfigSelection( choices=audio_language_choices, default="---") config.autolanguage.audio_defaultac3 = ConfigYesNo(default=False) config.autolanguage.audio_defaultddp = ConfigYesNo(default=False) config.autolanguage.audio_usecache = ConfigYesNo(default=True) subtitle_language_choices = audio_language_choices[: 1] + audio_language_choices[ 2:] config.autolanguage.subtitle_autoselect1 = ConfigSelection( choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect2 = ConfigSelection( choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect3 = ConfigSelection( choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect4 = ConfigSelection( choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default=False) config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default=False) config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default=False) config.autolanguage.subtitle_usecache = ConfigYesNo(default=True) config.autolanguage.equal_languages = ConfigSelection(default="15", choices=[ ("0", _("None")), ("1", "1"), ("2", "2"), ("3", "1,2"), ("4", "3"), ("5", "1,3"), ("6", "2,3"), ("7", "1,2,3"), ("8", "4"), ("9", "1,4"), ("10", "2,4"), ("11", "1,2,4"), ("12", "3,4"), ("13", "1,3,4"), ("14", "2,3,4"), ("15", _("All")) ]) config.streaming = ConfigSubsection() config.streaming.stream_ecm = ConfigYesNo(default=False) config.streaming.descramble = ConfigYesNo(default=True) config.streaming.stream_eit = ConfigYesNo(default=True) config.streaming.stream_ait = ConfigYesNo(default=True) config.streaming.authentication = ConfigYesNo(default=False)
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=False) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="4_3_letterbox") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") config.av.policy_169 = ConfigSelection( choices={ # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&Scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just Scale") }, default="letterbox") config.av.policy_43 = ConfigSelection( choices={ # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&Scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just Scale") }, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.defaultac3 = ConfigYesNo(default=False) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 25, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 25, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") def setEDIDBypass(configElement): f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() config.av.bypass_edid_checking.addNotifier(setEDIDBypass) can_pcm_multichannel = False if SystemInfo["CanMultiChannelPCM"]: config.av.multichannel_pcm = ConfigYesNo(default=False) can_pcm_multichannel = True if config.av.multichannel_pcm.value: try: can_pcm_multichannel = access( "/proc/stb/audio/multichannel_pcm", W_OK) and True or False except: can_pcm_multichannel = False SystemInfo["supportMultiChannelPCM"] = can_pcm_multichannel can_speaker_position = False if os_path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): can_speaker_position = True SystemInfo["supportSpeakerPosition"] = can_speaker_position if SystemInfo["CanSpeakerPosition"]: choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.surround_speaker_position = ConfigSelection( choices=choice_list, default="wide") if SystemInfo["Can3DSurround"]: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() if SystemInfo[ "supportSpeakerPosition"] and config.av.surround_3d.value == "none": config.av.surround_speaker_position.value = "wide" config.av.surround_speaker_position.save() SystemInfo["CanSpeakerPosition"] = False elif SystemInfo[ "supportSpeakerPosition"] and config.av.surround_3d.value != "none": SystemInfo["CanSpeakerPosition"] = True choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["supportSpeakerPosition"]: def setSpeakerPosition(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() config.av.surround_speaker_position.addNotifier(setSpeakerPosition) if SystemInfo["CanAVL"]: def setAVL(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.avl = ConfigSelection(choices=choice_list, default="none") config.av.avl.addNotifier(setAVL) if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") if SystemInfo["supportMultiChannelPCM"] and ( not config.av.downmix_ac3.value): SystemInfo["CanMultiChannelPCM"] = True elif SystemInfo[ "supportMultiChannelPCM"] and config.av.downmix_ac3.value: SystemInfo["CanMultiChannelPCM"] = False config.av.multichannel_pcm.value = False config.av.multichannel_pcm.save() config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) def setMultiChannelPCM(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") if SystemInfo["supportMultiChannelPCM"]: config.av.multichannel_pcm.addNotifier( setMultiChannelPCM, initial_call=config.av.multichannel_pcm.value) try: can_osd_alpha = open("/proc/stb/video/alpha", "r") and True or False except: can_osd_alpha = False SystemInfo["CanChangeOsdAlpha"] = can_osd_alpha def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) if can_osd_alpha: config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if os_path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=0, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing())
def InitAVSwitch(): if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'): config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) config.av.osd_alpha = ConfigSlider( default=255, limits=(0, 255) ) # Make openATV compatible with some plugins who still use config.av.osd_alpha colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigEnableDisable() choicelist = [] for i in range(5, 16): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection( default="5", choices=[("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min=500, max=15000, stepwidth=500, default=1000, wraparound=True) # SD - 480 / 576, standard definition # ED - 720, enhanced definition # HD - 1080, high definition # Supported conversions: # * -> 1080i60, 720p60, 480i60, 480p60 # *?50 -> 1080i50, 720p50, 576i50, 576p50 # *p25 -> 1080i50, 720p50, 576i50, 576p50 (1080p25 ?) # *p30 -> 1080p30 # *p24 -> 1080p24 if iAVSwitch.supports2160p: conv_60 = ["2160p", "1080p", "1080i", "720p", "480p", "480i"] conv_50 = ["2160p50", "1080p50", "1080i50", "720p50", "576p", "576i" ] + conv_60 conv_30 = ["2160p30", "1080p30"] + conv_60 conv_24 = ["2160p24", "1080p24"] + conv_60 elif iAVSwitch.supports1080p: conv_60 = ["1080p", "1080i", "720p", "480p", "480i"] conv_50 = ["1080p50", "1080i50", "720p50", "576p", "576i"] + conv_60 conv_30 = ["1080p30"] + conv_60 conv_24 = ["1080p24"] + conv_60 else: conv_60 = ["1080i", "720p", "480p", "480i"] conv_50 = ["1080i50", "720p50", "576p", "576i"] + conv_60 conv_30 = ["1080p30"] + conv_60 conv_24 = ["1080p24"] + conv_60 config.av.autores_sd24 = ConfigSelection(choices=conv_24) config.av.autores_sd25 = ConfigSelection(choices=conv_50) config.av.autores_sd30 = ConfigSelection(choices=conv_30) config.av.autores_sd50i = ConfigSelection(choices=conv_50) config.av.autores_sd50p = ConfigSelection(choices=conv_50) config.av.autores_sd60i = ConfigSelection(choices=conv_60) config.av.autores_sd60p = ConfigSelection(choices=conv_60) config.av.autores_ed24 = ConfigSelection(choices=conv_24) config.av.autores_ed25 = ConfigSelection(choices=conv_50) config.av.autores_ed30 = ConfigSelection(choices=conv_30) config.av.autores_ed50 = ConfigSelection(choices=conv_50) config.av.autores_ed60 = ConfigSelection(choices=conv_60) config.av.autores_hd24 = ConfigSelection(choices=conv_24) config.av.autores_hd25 = ConfigSelection(choices=conv_50) config.av.autores_hd30 = ConfigSelection(choices=conv_30) config.av.autores_hd50 = ConfigSelection(choices=conv_50) config.av.autores_hd60 = ConfigSelection(choices=conv_60) config.av.autores_uhd24 = ConfigSelection(choices=conv_24) config.av.autores_uhd25 = ConfigSelection(choices=conv_50) config.av.autores_uhd30 = ConfigSelection(choices=conv_30) config.av.autores_uhd50 = ConfigSelection(choices=conv_50) config.av.autores_uhd60 = ConfigSelection(choices=conv_60) # some boxes do not support YPbPr try: config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="yuv") except: config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic") }, default="16:9") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale") } if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default="panscan") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) # config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ( "YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA", ): iAVSwitch.setColorFormat(0) else: if getBoxType() == 'et6x00': colmap = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif getBoxType() == 'gbquad' or getBoxType( ) == 'gbquadplus' or getBoxType().startswith('et'): colmap = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: colmap = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(colmap[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): iAVSwitch.setAspectRatio({ "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 }[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero', 'axodin', 'axodinc', 'starsatlx', 'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2', 'gb800seplus', 'gb800ueplus')) or about.getModelString() == 'et6000': detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorspace"): f = open("/proc/stb/video/hdmi_colorspace", "r") have_colorspace = f.read().strip().split(" ") f.close() else: have_colorspace = False SystemInfo["havecolorspace"] = have_colorspace if have_colorspace: def setHDMIColorspace(configElement): try: f = open("/proc/stb/video/hdmi_colorspace", "w") f.write(configElement.value) f.close() except: pass if getBoxType() in ('vusolo4k', 'vuuno4k', 'vuultimo4k'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420") }, default="Edid(Auto)") else: config.av.hdmicolorspace = ConfigSelection(choices={ "auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444") }, default="auto") config.av.hdmicolorspace.addNotifier(setHDMIColorspace) else: config.av.hdmicolorspace = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorimetry"): f = open("/proc/stb/video/hdmi_colorimetry", "r") have_colorimetry = f.read().strip().split(" ") f.close() else: have_colorimetry = False SystemInfo["havecolorimetry"] = have_colorimetry if have_colorimetry: def setHDMIColorimetry(configElement): try: f = open("/proc/stb/video/hdmi_colorimetry", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolorimetry = ConfigSelection(choices={ "Auto": _("Auto"), "bt2020ncl": _("BT 2020 NCL"), "bt2020cl": _("BT 2020 CL"), "bt709": _("BT 709") }, default="Auto") config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry) else: config.av.hdmicolorimetry = ConfigNothing() if os.path.exists("/proc/stb/info/boxmode"): f = open("/proc/stb/info/boxmode", "r") have_boxmode = f.read().strip().split(" ") f.close() else: have_boxmode = False SystemInfo["haveboxmode"] = have_boxmode if have_boxmode: def setBoxmode(configElement): try: f = open("/proc/stb/info/boxmode", "w") f.write(configElement.value) f.close() except: pass config.av.boxmode = ConfigSelection(choices={ "12": _("PIP enabled, no HDR"), "1": _("HDR, 12bit 4:2:0/4:2:2, no PIP") }, default="12") config.av.boxmode.addNotifier(setBoxmode) else: config.av.boxmode = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colordepth"): f = open("/proc/stb/video/hdmi_colordepth", "r") have_HdmiColordepth = f.read().strip().split(" ") f.close() else: have_HdmiColordepth = False SystemInfo["havehdmicolordepth"] = have_HdmiColordepth if have_HdmiColordepth: def setHdmiColordepth(configElement): try: f = open("/proc/stb/video/hdmi_colordepth", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolordepth = ConfigSelection(choices={ "auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit") }, default="auto") config.av.hdmicolordepth.addNotifier(setHdmiColordepth) else: config.av.hdmicolordepth = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_hdrtype"): f = open("/proc/stb/video/hdmi_hdrtype", "r") have_HdmiHdrType = f.read().strip().split(" ") f.close() else: have_HdmiHdrType = False SystemInfo["havehdmihdrtype"] = have_HdmiHdrType if have_HdmiHdrType: def setHdmiHdrType(configElement): try: f = open("/proc/stb/video/hdmi_hdrtype", "w") f.write(configElement.value) f.close() except: pass config.av.hdmihdrtype = ConfigSelection(choices={ "auto": _("Auto"), "dolby": _("Dolby Vision"), "hdr10": _("HDR10"), "hlg": _("HLG"), "none": _("Off") }, default="auto") config.av.hdmihdrtype.addNotifier(setHdmiHdrType) else: config.av.hdmihdrtype = ConfigNothing() if os.path.exists("/proc/stb/hdmi/audio_source"): f = open("/proc/stb/hdmi/audio_source", "r") can_audiosource = f.read().strip().split(" ") f.close() else: can_audiosource = False SystemInfo["Canaudiosource"] = can_audiosource if can_audiosource: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF") }, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices=choice_list, default="center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices=choice_list, default="none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) def hasDownmix(target): try: f = open(os.path.join("/proc/stb/audio", target + "_choices"), "r") choices = f.read().strip() f.close() return "downmix" in choices except: return False def setDownmix(target, value): f = open(os.path.join("/proc/stb/audio", target), "w") textval = value and "downmix" or "passthrough" print "[AVSwitch] setting %s to %s" % (target.upper(), textval) f.write(textval) f.close() can_downmix_ac3 = hasDownmix("ac3") SystemInfo["CanDownmixAC3"] = can_downmix_ac3 if can_downmix_ac3: def setAC3Downmix(configElement): setDownmix("ac3", configElement.value) if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) can_downmix_dts = hasDownmix("dts") defective_dts_downmix = getBoxType() == "beyonwizu4" SystemInfo["CanDownmixDTS"] = can_downmix_dts and not defective_dts_downmix if can_downmix_dts: if not defective_dts_downmix: def setDTSDownmix(configElement): setDownmix("dts", configElement.value) config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) else: setDownmix("dts", False) can_downmix_aac = hasDownmix("aac") SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): setDownmix("aac", configElement.value) config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoHardware] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "[VideoHardware] couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=False) iAVSwitch.setConfiguredMode()
def InitAVSwitch(): config.av = ConfigSubsection() if getBoxType() == "vuduo" or getBoxBrand() == "ixuss": config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": _("CVBS")} # when YUV, Scart or S-Video is not support by HW, don't let the user select it if SystemInfo["HasYPbPr"]: colorformat_choices["yuv"] = _("YPbPr") if SystemInfo["HasScart"]: colorformat_choices["rgb"] = _("RGB") if SystemInfo["HasSVideo"]: colorformat_choices["svideo"] = _("S-Video") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "full" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy2_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="scale") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "nonlinear" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) policy_choices.update({"nonlinear": _("Nonlinear")}) except: pass try: if "full" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default="scale") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): if getBoxType() == "et6x00": map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif SystemInfo["GigaBlueQuad"] or getBoxType().startswith('et'): map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup if SystemInfo["GigaBlueQuad"] or getBoxType() in ( "et5x00", "et6x00", "ixussone", "ixusszero", "axodin", "axodinc", "starsatlx", "galaxym6", "geniuse3hd", "evoe3hd", "axase3", "axase3c", "optimussos1", "optimussos2", "gb800seplus", "gb800ueplus", "gbultrase", "gbultraue", "gbultraueh", "twinboxlcd"): detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): if SystemInfo["DreamBoxAudio"]: open("/proc/stb/audio/ac3", "w").write(configElement.value) else: open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") if SystemInfo["DreamBoxAudio"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.downmix_ac3 = ConfigSelection(choices=choice_list, default="downmix") else: config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanAC3plusTranscode"]: def setAC3plusTranscode(configElement): open("/proc/stb/audio/ac3plus", "w").write(configElement.value) if SystemInfo["DreamBoxAudio"]: choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI")), ("force_ddp", _("force AC3plus"))] config.av.transcodeac3plus = ConfigSelection(choices=choice_list, default="force_ac3") elif SystemInfo["GigaBlueAudio"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("force_dts", _("convert to DTS"))] config.av.transcodeac3plus = ConfigSelection(choices=choice_list, default="force_ac3") else: choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))] config.av.transcodeac3plus = ConfigSelection(choices=choice_list, default="force_ac3") config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) if SystemInfo["CanDTSHD"]: def setDTSHD(configElement): open("/proc/stb/audio/dtshd", "w").write(configElement.value) if SystemInfo["DreamBoxDTSAudio"]: choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_dts", _("convert to DTS"))] config.av.dtshd = ConfigSelection(choices=choice_list, default="use_hdmi_caps") else: choice_list = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.dtshd = ConfigSelection(choices=choice_list, default="downmix") config.av.dtshd.addNotifier(setDTSHD) if SystemInfo["CanWMAPRO"]: def setWMAPRO(configElement): open("/proc/stb/audio/wmapro", "w").write(configElement.value) choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.wmapro = ConfigSelection(choices=choice_list, default="downmix") config.av.wmapro.addNotifier(setWMAPRO) if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): if SystemInfo["DreamBoxAudio"] or SystemInfo["GigaBlueAudio"]: open("/proc/stb/audio/aac", "w").write(configElement.value) else: open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") if SystemInfo["DreamBoxAudio"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.downmix_aac = ConfigSelection(choices=choice_list, default="downmix") elif SystemInfo["GigaBlueAudio"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.downmix_aac = ConfigSelection(choices=choice_list, default="downmix") else: config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if SystemInfo["CanDownmixAACPlus"]: def setAACDownmixPlus(configElement): open("/proc/stb/audio/aacplus", "w").write(configElement.value) choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.downmix_aacplus = ConfigSelection(choices=choice_list, default="downmix") config.av.downmix_aacplus.addNotifier(setAACDownmixPlus) if SystemInfo["CanAACTranscode"]: def setAACTranscode(configElement): open("/proc/stb/audio/aac_transcode", "w").write(configElement.value) choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if SystemInfo["CanBTAudio"]: def setBTAudio(configElement): open("/proc/stb/audio/btaudio", "w").write(configElement.value) choice_list = [("off", _("off")), ("on", _("on"))] config.av.btaudio = ConfigSelection(choices=choice_list, default="off") config.av.btaudio.addNotifier(setBTAudio) else: config.av.btaudio = ConfigNothing() if SystemInfo["CanBTAudioDelay"]: def setBTAudioDelay(configElement): open("/proc/stb/audio/btaudio", "w").write(format(configElement.value * 90)) config.av.btaudiodelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.btaudiodelay.addNotifier(setBTAudioDelay) else: config.av.btaudiodelay = ConfigNothing() if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if SystemInfo["ScalerSharpness"]: def setScaler_sharpness(config): myval = int(config.value) try: print("--> setting scaler_sharpness to: %0.8X" % myval) open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print("[AVSwitch] couldn't write pep_scaler_sharpness") if SystemInfo["GigaBlueQuad"]: config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) if SystemInfo["HasMultichannelPCM"]: def setMultichannelPCM(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.multichannel_pcm = ConfigYesNo(default=False) config.av.multichannel_pcm.addNotifier(setMultichannelPCM) if SystemInfo["HasAutoVolume"]: def setAutoVolume(configElement): open(SystemInfo["HasAutoVolume"], "w").write(configElement.value) config.av.autovolume = ConfigSelection(default="none", choices=[("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.autovolume.addNotifier(setAutoVolume) if SystemInfo["HasAutoVolumeLevel"]: def setAutoVolumeLevel(configElement): open(SystemInfo["HasAutoVolumeLevel"], "w").write(configElement.value and "enabled" or "disabled") config.av.autovolumelevel = ConfigYesNo(default=False) config.av.autovolumelevel.addNotifier(setAutoVolumeLevel) if SystemInfo["Has3DSurround"]: def set3DSurround(configElement): open(SystemInfo["Has3DSurround"], "w").write(configElement.value) config.av.surround_3d = ConfigSelection(default="none", choices=[("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["Has3DSpeaker"]: def set3DSpeaker(configElement): open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value) config.av.speaker_3d = ConfigSelection(default="center", choices=[("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.speaker_3d.addNotifier(set3DSpeaker) if SystemInfo["Has3DSurroundSpeaker"]: def set3DSurroundSpeaker(configElement): open(SystemInfo["Has3DSurroundSpeaker"], "w").write(configElement.value) config.av.surround_3d_speaker = ConfigSelection( default="disabled", choices=[("disabled", _("off")), ("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) if SystemInfo["Has3DSurroundSoftLimiter"]: def set3DSurroundSoftLimiter(configElement): open(SystemInfo["Has3DSurroundSoftLimiter"], "w").write(configElement.value and "enabled" or "disabled") config.av.surround_softlimiter_3d = ConfigYesNo(default=False) config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter) if SystemInfo["HDMIAudioSource"]: def setHDMIAudioSource(configElement): open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value) config.av.hdmi_audio_source = ConfigSelection(default="pcm", choices=[ ("pcm", _("PCM")), ("spdif", _("SPDIF")) ]) config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource) def setVolumeStepsize(configElement): eDVBVolumecontrol.getInstance().setVolumeSteps(int( configElement.value)) config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5) config.av.volume_stepsize.addNotifier(setVolumeStepsize)
def InitAVSwitch(): config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={ "disabled": _("Disabled"), "all": _("All resolutions"), "hd": _("only HD") }, default="disabled") choicelist = [] for i in range(5, 16): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection( default="5", choices=[("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min=0, max=15000, stepwidth=500, default=500, wraparound=True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={ "720p": _("720p"), "1080i": _("1080i") }, default="720p") config.av.autores_480p24 = ConfigSelection(choices={ "480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={ "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_1080p24 = ConfigSelection(choices={ "1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz") }, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={ "1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz") }, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={ "1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz") }, default="1080p30") config.av.autores_2160p24 = ConfigSelection(choices={ "2160p24": _("2160p 24Hz"), "2160p25": _("2160p 25Hz"), "2160p30": _("2160p 30Hz") }, default="2160p24") config.av.autores_2160p25 = ConfigSelection(choices={ "2160p25": _("2160p 25Hz"), "2160p50": _("2160p 50Hz") }, default="2160p25") config.av.autores_2160p30 = ConfigSelection(choices={ "2160p30": _("2160p 30Hz"), "2160p60": _("2160p 60Hz") }, default="2160p30") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic") }, default="16:9") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale") } if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default="panscan") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setHDMIColorspace(configElement): try: f = open(SystemInfo["havecolorspace"], "w") f.write(configElement.value) f.close() except: pass def setHDMIColorimetry(configElement): try: f = open(SystemInfo["havecolorimetry"], "w") f.write(configElement.value) f.close() except: pass def setHdmiColordepth(configElement): try: f = open(SystemInfo["havehdmicolordepth"], "w") f.write(configElement.value) f.close() except: pass def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() def set3DPosition(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") f.write(configElement.value) f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if SystemInfo["supportPcmMultichannel"]: config.av.pcm_multichannel.setValue(False) def setAC3plusTranscode(configElement): f = open("/proc/stb/audio/ac3plus", "w") f.write(configElement.value) f.close() def setDTSDownmix(configElement): f = open("/proc/stb/audio/dts", "w") f.write(configElement.value) f.close() def setDTSHD(configElement): f = open("/proc/stb/audio/dtshd", "w") f.write(configElement.value) f.close() def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") f.write(configElement.value) f.close() def setAACDownmixPlus(configElement): f = open("/proc/stb/audio/aacplus", "w") f.write(configElement.value) f.close() def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() def setWMAPRO(configElement): f = open("/proc/stb/audio/wmapro", "w") f.write(configElement.value) f.close() def setBoxmode(configElement): try: f = open("/proc/stb/info/boxmode", "w") f.write(configElement.value) f.close() except: pass def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoHardware] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "[VideoHardware] couldn't write pep_scaler_sharpness" def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ( "YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA"): iAVSwitch.setColorFormat(0) else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def read_choices(procx, defchoice): with open(procx, 'r') as myfile: choices = myfile.read().strip() myfile.close() if choices: choiceslist = choices.split(" ") choicesx = [(item, _("%s") % item) for item in choiceslist] defaultx = choiceslist[0] for item in choiceslist: if "%s" % defchoice.upper in item.upper(): defaultx = item break return (choicesx, defaultx) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() if SystemInfo["Canedidchecking"]: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if SystemInfo["havecolorspace"]: if getBrandOEM() == "vuplus" and SystemInfo["HasMMC"]: choices = [("Edid(Auto)", _("Auto")), ("Hdmi_Rgb", _("RGB")), ("444", _("YCbCr444")), ("422", _("YCbCr422")), ("420", _("YCbCr420"))] default = "Edid(Auto)" else: choices = [("auto", _("Auto")), ("rgb", _("RGB")), ("420", _("420")), ("422", _("422")), ("444", _("444"))] default = "auto" if SystemInfo["havecolorspacechoices"] and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colorspace_choices" (choices, default) = read_choices(f, default) config.av.hdmicolorspace = ConfigSelection(choices=choices, default=default) config.av.hdmicolorspace.addNotifier(setHDMIColorspace) else: config.av.hdmicolorspace = ConfigNothing() if SystemInfo["havecolorimetry"]: choices = [("auto", _("auto")), ("bt2020ncl", _("BT 2020 NCL")), ("bt2020cl", _("BT 2020 CL")), ("bt709", _("BT 709"))] default = "auto" if SystemInfo["havecolorimetrychoices"] and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colorimetry_choices" (choices, default) = read_choices(f, default) config.av.hdmicolorimetry = ConfigSelection(choices=choices, default=default) config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry) else: config.av.hdmicolorimetry = ConfigNothing() if SystemInfo["havehdmicolordepth"]: choices = [("auto", _("Auto")), ("8bit", _("8bit")), ("10bit", _("10bit")), ("12bit", _("12bit"))] default = "auto" if SystemInfo["havehdmicolordepthchoices"] and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colordepth_choices" (choices, default) = read_choices(f, default) config.av.hdmicolordepth = ConfigSelection(choices=choices, default=default) config.av.hdmicolordepth.addNotifier(setHdmiColordepth) else: config.av.hdmicolordepth = ConfigNothing() if SystemInfo["havehdmihdrtype"]: def setHdmiHdrType(configElement): try: f = open("/proc/stb/video/hdmi_hdrtype", "w") f.write(configElement.value) f.close() except: pass config.av.hdmihdrtype = ConfigSelection(choices={ "auto": _("Auto"), "dolby": _("dolby"), "none": _("sdr"), "hdr10": _("hdr10"), "hlg": _("hlg") }, default="auto") config.av.hdmihdrtype.addNotifier(setHdmiHdrType) else: config.av.hdmihdrtype = ConfigNothing() if SystemInfo["HDRSupport"]: def setHlgSupport(configElement): open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value) config.av.hlg_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hlg_support.addNotifier(setHlgSupport) def setHdr10Support(configElement): open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value) config.av.hdr10_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hdr10_support.addNotifier(setHdr10Support) def setDisable12Bit(configElement): open("/proc/stb/video/disable_12bit", "w").write(configElement.value) config.av.allow_12bit = ConfigSelection(default="0", choices=[("0", _("yes")), ("1", _("no"))]) config.av.allow_12bit.addNotifier(setDisable12Bit) def setDisable10Bit(configElement): open("/proc/stb/video/disable_10bit", "w").write(configElement.value) config.av.allow_10bit = ConfigSelection(default="0", choices=[("0", _("yes")), ("1", _("no"))]) config.av.allow_10bit.addNotifier(setDisable10Bit) if SystemInfo["Canaudiosource"]: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF") }, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if SystemInfo["Can3DSurround"]: choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] default = "none" if SystemInfo["CanProc"]: f = "/proc/stb/audio/3d_surround_choices" (choices, default) = read_choices(f, default) config.av.surround_3d = ConfigSelection(choices=choices, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if SystemInfo["Can3DSpeaker"]: choices = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] default = "center" if SystemInfo["CanProc"]: f = "/proc/stb/audio/3d_surround_speaker_position_choices" (choices, default) = read_choices(f, default) config.av.surround_3d_speaker = ConfigSelection(choices=choices, default=default) config.av.surround_3d_speaker.addNotifier(set3DPosition) else: config.av.surround_3d_speaker = ConfigNothing() if SystemInfo["CanAutoVolume"]: choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] default = "none" if SystemInfo["CanProc"]: f = "/proc/stb/audio/avl_choices" (choices, default) = read_choices(f, default) config.av.autovolume = ConfigSelection(choices=choices, default=default) config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() if SystemInfo["supportPcmMultichannel"]: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) if SystemInfo["CanDownmixAC3"]: choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/ac3_choices" (choices, default) = read_choices(f, default) config.av.downmix_ac3 = ConfigSelection(choices=choices, default=default) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanAC3Transcode"]: choices = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))] default = "force_ac3" if SystemInfo["CanProc"]: f = "/proc/stb/audio/ac3plus_choices" (choices, default) = read_choices(f, default) config.av.transcodeac3plus = ConfigSelection(choices=choices, default=default) config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) if SystemInfo["CanDownmixDTS"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/dts_choices" (choices, default) = read_choices(f, default) config.av.downmix_dts = ConfigSelection(choices=choices, default=default) config.av.downmix_dts.addNotifier(setDTSDownmix) if SystemInfo["CanDTSHD"]: choices = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/dtshd_choices" (choices, default) = read_choices(f, default) config.av.dtshd = ConfigSelection(choices=choices, default=default) config.av.dtshd.addNotifier(setDTSHD) if SystemInfo["CanDownmixAAC"]: choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aac_choices" (choices, default) = read_choices(f, default) config.av.downmix_aac = ConfigSelection(choices=choices, default=default) config.av.downmix_aac.addNotifier(setAACDownmix) if SystemInfo["CanDownmixAACPlus"]: choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aacplus_choices" (choices, default) = read_choices(f, default) config.av.downmix_aacplus = ConfigSelection(choices=choices, default=default) config.av.downmix_aacplus.addNotifier(setAACDownmixPlus) if SystemInfo["CanAACTranscode"]: choices = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] default = "off" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aac_transcode_choices" (choices, default) = read_choices(f, default) config.av.transcodeaac = ConfigSelection(choices=choices, default=default) config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if SystemInfo["CanWMAPRO"]: choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/wmapro_choices" (choices, default) = read_choices(f, default) config.av.wmapro = ConfigSelection(choices=choices, default=default) config.av.wmapro.addNotifier(setWMAPRO) if SystemInfo["haveboxmode"]: config.av.boxmode = ConfigSelection(choices={ "12": _("PIP enabled, no HDR"), "1": _("HDR, 12bit 4:2:0/4:2:2, no PIP") }, default="12") config.av.boxmode.addNotifier(setBoxmode) else: config.av.boxmode = ConfigNothing() if SystemInfo["HasScaler_sharpness"]: if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=False) iAVSwitch.setConfiguredMode()
def InitAVSwitch(): if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'): config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) config.av.osd_alpha = ConfigSlider( default=255, increment=5, limits=(20, 255) ) # Make openHDF compatible with some plugins who still use config.av.osd_alpha colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={ "disabled": _("Disabled"), "all": _("All resolutions"), "hd": _("only HD") }, default="disabled") choicelist = [] for i in range(5, 16): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection( default="5", choices=[("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min=50, max=3000, stepwidth=50, default=400, wraparound=True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={ "720p50": _("720p50"), "720p": _("720p"), "1080i50": _("1080i50"), "1080i": _("1080i") }, default="720p50") config.av.autores_480p24 = ConfigSelection(choices={ "480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={ "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz"), "1080i50": _("1080i 50Hz"), "1080i": _("1080i 60Hz") }, default="720p24") config.av.autores_1080p24 = ConfigSelection(choices={ "1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz"), "1080i50": _("1080p 50Hz"), "1080i": _("1080i 60Hz") }, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={ "1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz"), "1080i50": _("1080i 50Hz") }, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={ "1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz"), "1080i": _("1080i 60Hz") }, default="1080p30") config.av.smart1080p = ConfigSelection(choices={ "false": _("off"), "true": _("1080p50: 24/50/60Hz"), "1080i50": _("1080i50: 24/50/60Hz"), "720p50": _("720p50: 24/50/60Hz") }, default="false") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic") }, default="16:9") if getBoxType() == 'inihde': config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="yuv") else: config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale") } if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default="panscan") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) #config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ( "YPbPr", "Scart-YPbPr") or getMachineBuild() == 'inihdx': iAVSwitch.setColorFormat(3) else: if getBoxType() == 'et6x00': map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif getBoxType() == 'gbquad' or getBoxType( ) == 'gbquadplus' or getBoxType().startswith('et'): map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero', 'axodin', 'axodinc', 'starsatlx', 'galaxym6', 'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2', 'gb800seplus', 'gb800ueplus', 'gbultrase', 'gbultraue')) or about.getModelString() == 'et6000': detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000001") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/hdmi/audio_source"): f = open("/proc/stb/hdmi/audio_source", "r") can_audiosource = f.read().strip().split(" ") f.close() else: can_audiosource = False SystemInfo["Canaudiosource"] = can_audiosource if can_audiosource: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF") }, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if os.path.exists("/proc/stb/hdmi/audio_source"): f = open("/proc/stb/hdmi/audio_source", "r") can_audiosource = f.read().strip().split(" ") f.close() else: can_audiosource = False SystemInfo["Canaudiosource"] = can_audiosource if can_audiosource: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF") }, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices=choice_list, default="center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices=choice_list, default="none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: f = open("/proc/stb/audio/ac3_choices", "r") file = f.read()[:-1] f.close() can_downmix_ac3 = "downmix" in file except: can_downmix_ac3 = False SystemInfo["CanPcmMultichannel"] = False SystemInfo["CanDownmixAC3"] = can_downmix_ac3 if can_downmix_ac3: def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) try: SystemInfo["CanDownmixDTS"] = "downmix" in open( "/proc/stb/audio/dts_choices", "r").read() except: SystemInfo["CanDownmixDTS"] = False if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: f = open("/proc/stb/audio/aac_choices", "r") file = f.read()[:-1] f.close() can_downmix_aac = "downmix" in file except: can_downmix_aac = False SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoMode] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=False) iAVSwitch.setConfiguredMode()
def InitUsageConfig(): config.usage = ConfigSubsection(); config.usage.showdish = ConfigYesNo(default = True) config.usage.multibouquet = ConfigYesNo(default = True) config.usage.alternative_number_mode = ConfigYesNo(default = False) def alternativeNumberModeChange(configElement): enigma.eDVBDB.getInstance().setNumberingMode(configElement.value) refreshServiceList() config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange) config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False) config.usage.quickzap_bouquet_change = ConfigYesNo(default = False) config.usage.e1like_radio_mode = ConfigYesNo(default = True) choicelist = [] for i in range(1, 12): choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.usage.infobar_timeout = ConfigSelection(default = "5", choices = [("0", _("no timeout"))] + choicelist) config.usage.show_infobar_on_zap = ConfigYesNo(default = True) config.usage.show_infobar_on_skip = ConfigYesNo(default = True) config.usage.show_infobar_on_event_change = ConfigYesNo(default = False) # config.usage.show_second_infobar = ConfigSelection(default = None, choices = [(None, _("None")), ("0", _("no timeout"))] + choicelist + [("EPG",_("EPG"))]) config.usage.show_second_infobar = ConfigSelection(default = "5", choices = [(None, _("None")), ("0", _("no timeout"))] + choicelist) config.usage.show_spinner = ConfigYesNo(default = True) config.usage.enable_tt_caching = ConfigYesNo(default = True) choicelist = [] for i in (10, 30): choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300, 600, 1200, 1800): m = i / 60 choicelist.append(("%d" % i, ngettext("%d minute", "%d minutes", m) % m)) for i in (3600, 7200, 14400): h = i / 3600 choicelist.append(("%d" % i, ngettext("%d hour", "%d hours", h) % h)) config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("no standby"))] + choicelist) config.usage.output_12V = ConfigSelection(default = "do not change", choices = [ ("do not change", _("do not change")), ("off", _("off")), ("on", _("on")) ]) config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [ ("standard", _("standard")), ("swap", _("swap PiP and main picture")), ("swapstop", _("move PiP to main picture")), ("stop", _("stop PiP")) ]) config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD)) config.usage.timer_path = ConfigText(default = "<default>") config.usage.instantrec_path = ConfigText(default = "<default>") config.usage.timeshift_path = ConfigText(default = "/media/hdd/") config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"]) config.usage.movielist_trashcan = ConfigYesNo(default=True) config.usage.movielist_trashcan_days = ConfigNumber(default=8) config.usage.movielist_trashcan_reserve = ConfigNumber(default=40) config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [ ("ask", _("Ask user")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning")) ]) config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ]) config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")), ("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)"))]) config.usage.next_movie_msg = ConfigYesNo(default = True) config.usage.setup_level = ConfigSelection(default = "expert", choices = [ ("simple", _("Simple")), ("intermediate", _("Intermediate")), ("expert", _("Expert")) ]) config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [ ("show_menu", _("show shutdown menu")), ("shutdown", _("immediate shutdown")), ("standby", _("Standby")) ] ) config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [ ("show_menu", _("show shutdown menu")), ("shutdown", _("immediate shutdown")), ("standby", _("Standby")) ] ) config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [ ("0", "DVB-S/-C/-T"), ("1", "DVB-S/-T/-C"), ("2", "DVB-C/-S/-T"), ("3", "DVB-C/-T/-S"), ("4", "DVB-T/-C/-S"), ("5", "DVB-T/-S/-C") ]) nims = [("-1", _("auto"))] for x in nimmanager.nim_slots: nims.append((str(x.slot), x.getSlotName())) config.usage.frontend_priority = ConfigSelection(default = "-1", choices = nims) config.misc.disable_background_scan = ConfigYesNo(default = False) config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [ ('barleft', _("Progress Bar Left")), ('barright', _("Progress Bar Right")), ('percleft', _("Percentage Left")), ('percright', _("Percentage Right")), ('no', _("No")) ]) config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True) config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList) config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList) config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False) config.usage.show_message_when_recording_starts = ConfigYesNo(default = True) config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True) config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [ ('o', _("Off")), ('p', _("Progress")), ('s', _("Progress Small")), ('i', _("Icons")), ]) config.usage.movielist_unseen = ConfigYesNo(default = False) config.usage.swap_snr_on_osd = ConfigYesNo(default = False) def SpinnerOnOffChanged(configElement): setSpinnerOnOff(int(configElement.value)) config.usage.show_spinner.addNotifier(SpinnerOnOffChanged) def EnableTtCachingChanged(configElement): setEnableTtCachingOnOff(int(configElement.value)) config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged) def TunerTypePriorityOrderChanged(configElement): setTunerTypePriorityOrder(int(configElement.value)) config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False) def PreferredTunerChanged(configElement): setPreferredTuner(int(configElement.value)) config.usage.frontend_priority.addNotifier(PreferredTunerChanged) config.usage.hide_zap_errors = ConfigYesNo(default = False) config.usage.hide_ci_messages = ConfigYesNo(default = False) config.usage.show_cryptoinfo = ConfigYesNo(default = True) config.usage.show_eit_nownext = ConfigYesNo(default = True) config.epg = ConfigSubsection() config.epg.eit = ConfigYesNo(default = True) config.epg.mhw = ConfigYesNo(default = False) config.epg.freesat = ConfigYesNo(default = True) config.epg.viasat = ConfigYesNo(default = True) config.epg.netmed = ConfigYesNo(default = True) config.misc.showradiopic = ConfigYesNo(default = True) def EpgSettingsChanged(configElement): from enigma import eEPGCache mask = 0xffffffff if not config.epg.eit.value: mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER) if not config.epg.mhw.value: mask &= ~eEPGCache.MHW if not config.epg.freesat.value: mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER) if not config.epg.viasat.value: mask &= ~eEPGCache.VIASAT if not config.epg.netmed.value: mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER) eEPGCache.getInstance().setEpgSources(mask) config.epg.eit.addNotifier(EpgSettingsChanged) config.epg.mhw.addNotifier(EpgSettingsChanged) config.epg.freesat.addNotifier(EpgSettingsChanged) config.epg.viasat.addNotifier(EpgSettingsChanged) config.epg.netmed.addNotifier(EpgSettingsChanged) config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True) def EpgHistorySecondsChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60) config.epg.histminutes.addNotifier(EpgHistorySecondsChanged) def setHDDStandby(configElement): for hdd in harddiskmanager.HDDList(): hdd[1].setIdleTime(int(configElement.value)) config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False) def set12VOutput(configElement): if configElement.value == "on": enigma.Misc_Options.getInstance().set_12V_output(1) elif configElement.value == "off": enigma.Misc_Options.getInstance().set_12V_output(0) config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False) SystemInfo["12V_Output"] = enigma.Misc_Options.getInstance().detected_12V_output() config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml")) config.seek = ConfigSubsection() config.seek.selfdefined_13 = ConfigNumber(default=15) config.seek.selfdefined_46 = ConfigNumber(default=60) config.seek.selfdefined_79 = ConfigNumber(default=300) config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25]) config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.on_pause = ConfigSelection(default = "play", choices = [ ("play", _("Play")), ("step", _("Singlestep (GOP)")), ("last", _("Last speed")) ]) config.crash = ConfigSubsection() config.crash.details = ConfigYesNo(default = False) config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("at beginning")), ("end", _("at end"))]) def updateEnterForward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_forward, configElement.value) config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False) def updateEnterBackward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_backward, configElement.value) config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False) def updateEraseSpeed(el): enigma.eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value)) def updateEraseFlags(el): enigma.eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value)) config.misc.erase_speed = ConfigSelection(default="20", choices = [ ("10", "10 MB/s"), ("20", "20 MB/s"), ("50", "50 MB/s"), ("100", "100 MB/s")]) config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False) config.misc.erase_flags = ConfigSelection(default="1", choices = [ ("0", _("Disable")), ("1", _("Internal hdd only")), ("3", _("Everywhere"))]) config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False) SystemInfo["ZapMode"] = os.path.exists("/proc/stb/video/zapmode") if SystemInfo["ZapMode"]: def setZapmode(el): try: file = open("/proc/stb/video/zapmode", "w") file.write(el.value) file.close() except: pass config.misc.zapmode = ConfigSelection(default = "mute", choices = [ ("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))]) config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False) config.subtitles = ConfigSubsection() config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("original")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False) config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50") config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center") config.subtitles.subtitle_rewrap = ConfigYesNo(default = False) config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3") config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["16", "18", "20", "22", "24", "26", "28", "30", "32", "34", "36", "38", "40", "42", "44", "46", "48", "50", "52", "54"], default = "34") choicelist = [] for i in range(45000, 945000, 45000): choicelist.append(("%d" % i, "%2.1f sec" % (i / 90000.))) config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = [("0", _("No Delay"))] + choicelist) config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False) config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("original")), ("1", _("fixed")), ("2", _("relative"))]) config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = False) config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [ ("0", _("no transparency")), ("25", "10%"), ("50", "20%"), ("75", "30%"), ("100", "40%"), ("125", "50%"), ("150", "60%"), ("175", "70%"), ("200", "80%"), ("225", "90%"), ("255", _("full transparency"))]) config.subtitles.pango_subtitles_yellow = ConfigYesNo(default = False) config.autolanguage = ConfigSubsection() audio_language_choices=[ ("---", _("None")), ("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")), ("ara", _("Arabic")), ("eus baq", _("Basque")), ("bul", _("Bulgarian")), ("hrv", _("Croatian")), ("ces cze", _("Czech")), ("dan", _("Danish")), ("dut ndl", _("Dutch")), ("eng qaa", _("English")), ("est", _("Estonian")), ("fin", _("Finnish")), ("fra fre", _("French")), ("deu ger", _("German")), ("ell gre", _("Greek")), ("heb", _("Hebrew")), ("hun", _("Hungarian")), ("ita", _("Italian")), ("lat", _("Latvian")), ("lit", _("Lithuanian")), ("ltz", _("Letzeburgesch")), ("nor", _("Norwegian")), ("pol", _("Polish")), ("por", _("Portuguese")), ("fas per", _("Persian")), ("ron rum", _("Romanian")), ("rus", _("Russian")), ("srp", _("Serbian")), ("slk slo", _("Slovak")), ("slv", _("Slovenian")), ("spa", _("Spanish")), ("swe", _("Swedish")), ("tha", _("Thai")), ("tur Audio_TUR", _("Turkish")), ("und", _("Undetermined")), ] def setEpgLanguage(configElement): enigma.eServiceEvent.setEPGLanguage(configElement.value) config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage) def setEpgLanguageAlternative(configElement): enigma.eServiceEvent.setEPGLanguageAlternative(configElement.value) config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative) config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False) config.autolanguage.audio_usecache = ConfigYesNo(default = True) subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:] config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False) config.autolanguage.subtitle_usecache = ConfigYesNo(default = True) config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [ ("0", "None"),("1", "1"),("2", "2"),("3", "1,2"), ("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"), ("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"), ("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", "All")]) config.streaming = ConfigSubsection() config.streaming.stream_ecm = ConfigYesNo(default = False) config.streaming.descramble = ConfigYesNo(default = True) config.streaming.stream_eit = ConfigYesNo(default = True) config.streaming.stream_ait = ConfigYesNo(default = True)
def InitAVSwitch(): if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'): config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) config.av.osd_alpha = ConfigSlider(default=255, increment = 5, limits=(20,255)) # Make openATV compatible with some plugins who still use config.av.osd_alpha colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")} # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={"disabled": _("Disabled"), "simple": _("Simple"), "native": _("Native"), "all": _("All resolutions"), "hd": _("only HD")}, default="disabled") config.av.autores_preview = NoSave(ConfigYesNo(default=False)) config.av.autores_1080i_deinterlace = ConfigYesNo(default=False) choicelist = { "24,24": _("24p/24p"), "24,25": _("24p/25p"), "24,30": _("24p/30p"), "24,50": _("24p/50p"), "24,60": _("24p/60p"), "25,24": _("25p/24p"), "30,24": _("30p/24p"), "50,24": _("50p/24p"), "60,24": _("60p/24p"), "25,25": _("25p/25p"), "25,30": _("25p/30p"), "25,50": _("25p/50p"), "25,60": _("25p/60p"), "30,25": _("30p/25p"), "50,25": _("50p/25p"), "60,25": _("60p/25p"), "30,30": _("30p/30p"), "30,50": _("30p/50p"), "30,60": _("30p/60p"), "50,30": _("50p/30p"), "60,30": _("60p/30p"), "50,50": _("50p/50p"), "50,60": _("50p/60p"), "60,50": _("60p/50p"), "60,60": _("60p/60p") } # first value <=720p , second value > 720p config.av.autores_24p = ConfigSelection(choices=choicelist, default="50,24") config.av.autores_25p = ConfigSelection(choices=choicelist, default="50,25") config.av.autores_30p = ConfigSelection(choices=choicelist, default="60,30") config.av.autores_unknownres = ConfigSelection(choices={"next": _("next higher Resolution"), "highest": _("highest Resolution")}, default="next") choicelist = [] for i in range(5, 16): choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection(default = "5", choices = [("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min = 0, max = 3000, stepwidth = 50, default = 400, wraparound = True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={"720p50": _("720p50"), "720p": _("720p"), "1080i50": _("1080i50"), "1080i": _("1080i")}, default="720p50") config.av.autores_480p24 = ConfigSelection(choices={"480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz")}, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={"720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz"), "1080i50": _("1080i 50Hz"), "1080i": _("1080i 60Hz")}, default="720p24") config.av.autores_1080p24 = ConfigSelection(choices={"1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz"), "1080i50": _("1080p 50Hz"), "1080i": _("1080i 60Hz")}, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={"1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz"), "1080i50": _("1080i 50Hz")}, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={"1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz"), "1080i": _("1080i 60Hz")}, default="1080p30") config.av.smart1080p = ConfigSelection(choices={"false": _("off"), "true": _("1080p50: 24p/50p/60p"), "2160p50": _("2160p50: 24p/50p/60p"), "1080i50": _("1080i50: 24p/50i/60i"), "720p50": _("720p50: 24p/50p/60p")}, default="false") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox")}, default = "16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic")}, default = "16:9") # Some boxes have a redundant proc entry for policy2 choices, but some don't (The choices are from a 16:9 point of view anyways) if os.path.exists("/proc/stb/video/policy2_choices"): policy2_choices_proc="/proc/stb/video/policy2_choices" else: policy2_choices_proc="/proc/stb/video/policy_choices" try: policy2_choices_raw=open(policy2_choices_proc, "r").read() except: policy2_choices_raw="letterbox" policy2_choices = {} if "letterbox" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. policy2_choices.update({"letterbox": _("Letterbox")}) if "panscan" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term policy2_choices.update({"panscan": _("Pan&scan")}) if "nonliner" in policy2_choices_raw and not "nonlinear" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the top/bottom (Center of picture maintains aspect, top/bottom lose aspect heaver than on linear stretch)) policy2_choices.update({"nonliner": _("Stretch nonlinear")}) if "nonlinear" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the top/bottom (Center of picture maintains aspect, top/bottom lose aspect heaver than on linear stretch)) policy2_choices.update({"nonlinear": _("Stretch nonlinear")}) if "scale" in policy2_choices_raw and not "auto" in policy2_choices_raw and not "bestfit" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy2_choices.update({"scale": _("Stretch linear")}) if "full" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (force aspect)) policy2_choices.update({"full": _("Stretch full")}) if "auto" in policy2_choices_raw and not "bestfit" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy2_choices.update({"auto": _("Stretch linear")}) if "bestfit" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy2_choices.update({"bestfit": _("Stretch linear")}) config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox") policy_choices_proc="/proc/stb/video/policy_choices" try: policy_choices_raw=open(policy_choices_proc, "r").read() except: policy_choices_raw="panscan" policy_choices = {} if "pillarbox" in policy_choices_raw and not "panscan" in policy_choices_raw: # Very few boxes support "pillarbox" as an alias for "panscan" (Which in fact does pillarbox) # So only add "pillarbox" if "panscan" is not listed in choices # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. policy_choices.update({"pillarbox": _("Pillarbox")}) if "panscan" in policy_choices_raw: # DRIVER BUG: "panscan" in /proc actually does "pillarbox" (That's probably why an alias to it named "pillarbox" existed)! # Interpret "panscan" setting with a "Pillarbox" text in order to show the correct value in GUI # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. policy_choices.update({"panscan": _("Pillarbox")}) if "letterbox" in policy_choices_raw: # DRIVER BUG: "letterbox" in /proc actually does pan&scan # "letterbox" and 4:3 content on 16:9 TVs is mutually exclusive, as "letterbox" is the method to show wide content on narrow TVs # Probably the bug arose as the driver actually does the same here as it would for wide content on narrow TVs (It stretches the picture to fit width) # TRANSLATORS: (aspect ratio policy: Fit width, cut/crop top and bottom (Maintain aspect ratio)) policy_choices.update({"letterbox": _("Pan&scan")}) if "nonliner" in policy_choices_raw and not "nonlinear" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right (Center 50% of picture maintain aspect, left/right 25% lose aspect heaver than on linear stretch)) policy_choices.update({"nonliner": _("Stretch nonlinear")}) if "nonlinear" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right (Center 50% of picture maintain aspect, left/right 25% lose aspect heaver than on linear stretch)) policy_choices.update({"nonlinear": _("Stretch nonlinear")}) # "auto", "bestfit" and "scale" are aliasses for the same: Stretch linear if "scale" in policy_choices_raw and not "auto" in policy_choices_raw and not "bestfit" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy_choices.update({"scale": _("Stretch linear")}) if "full" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (force aspect)) policy_choices.update({"full": _("Stretch full")}) if "auto" in policy_choices_raw and not "bestfit" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy_choices.update({"auto": _("Stretch linear")}) if "bestfit" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy_choices.update({"bestfit": _("Stretch linear")}) config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "panscan") config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal") config.av.wss = ConfigEnableDisable(default = True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.vcrswitch = ConfigEnableDisable(default = False) #config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ("YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA"): iAVSwitch.setColorFormat(0) else: if getBoxType() == 'et6x00': map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif getBoxType() == 'gbquad' or getBoxType() == 'gbquadplus' or getBoxType().startswith('et'): map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6} iAVSwitch.setAspectRatio(map[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero', 'axodin', 'axodinc', 'starsatlx', 'galaxym6', 'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2', 'gb800seplus', 'gb800ueplus', 'gbultrase', 'gbultraue', 'gbultraueh' , 'twinboxlcd' )) or about.getModelString() == 'et6000': detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on")}, default = "00000001") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() def setUnsupportModes(configElement): iAVSwitch.readPreferredModes() iAVSwitch.createConfig() config.av.edid_override.addNotifier(setUnsupportModes) if os.path.exists("/proc/stb/video/hdmi_colorspace"): f = open("/proc/stb/video/hdmi_colorspace", "r") have_colorspace = f.read().strip().split(" ") f.close() else: have_colorspace = False SystemInfo["havecolorspace"] = have_colorspace if have_colorspace: def setHDMIColorspace(configElement): try: f = open("/proc/stb/video/hdmi_colorspace", "w") f.write(configElement.value) f.close() except: pass if getBoxType() in ('vusolo4k','vuuno4k','vuuno4kse','vuultimo4k'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420")}, default = "Edid(Auto)") elif getBoxType() in ('dm900','dm920','vuzero4k'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "Itu_R_BT_709": _("BT709"), "DVI_Full_Range_RGB": _("Full Range RGB"), "FCC": _("FCC 1953"), "Itu_R_BT_470_2_BG": _("BT470 BG"), "Smpte_170M": _("Smpte 170M"), "Smpte_240M": _("Smpte 240M"), "Itu_R_BT_2020_NCL": _("BT2020 NCL"), "Itu_R_BT_2020_CL": _("BT2020 CL"), "XvYCC_709": _("BT709 XvYCC"), "XvYCC_601": _("BT601 XvYCC")}, default = "Edid(Auto)") else: config.av.hdmicolorspace = ConfigSelection(choices={ "auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444")}, default = "auto") config.av.hdmicolorspace.addNotifier(setHDMIColorspace) else: config.av.hdmicolorspace = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorimetry"): f = open("/proc/stb/video/hdmi_colorimetry", "r") have_colorimetry = f.read().strip().split(" ") f.close() else: have_colorimetry = False SystemInfo["havecolorimetry"] = have_colorimetry if have_colorimetry: def setHDMIColorimetry(configElement): sleep(0.1) try: f = open("/proc/stb/video/hdmi_colorimetry", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolorimetry = ConfigSelection(choices={ "auto": _("auto"), "bt2020ncl": _("BT 2020 NCL"), "bt2020cl": _("BT 2020 CL"), "bt709": _("BT 709")}, default = "auto") config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry) else: config.av.hdmicolorimetry = ConfigNothing() if os.path.exists("/proc/stb/info/boxmode"): f = open("/proc/stb/info/boxmode", "r") have_boxmode = f.read().strip().split(" ") f.close() else: have_boxmode = False SystemInfo["haveboxmode"] = have_boxmode if have_boxmode: def setBoxmode(configElement): try: f = open("/proc/stb/info/boxmode", "w") f.write(configElement.value) f.close() except: pass config.av.boxmode = ConfigSelection(choices={ "12": _("enable PIP no HDR"), "1": _("12bit 4:2:0/4:2:2 no PIP")}, default = "12") config.av.boxmode.addNotifier(setBoxmode) else: config.av.boxmode = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colordepth"): f = open("/proc/stb/video/hdmi_colordepth", "r") have_HdmiColordepth = f.read().strip().split(" ") f.close() else: have_HdmiColordepth = False SystemInfo["havehdmicolordepth"] = have_HdmiColordepth if have_HdmiColordepth: def setHdmiColordepth(configElement): try: f = open("/proc/stb/video/hdmi_colordepth", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolordepth = ConfigSelection(choices={ "auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit")}, default = "auto") config.av.hdmicolordepth.addNotifier(setHdmiColordepth) else: config.av.hdmicolordepth = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_hdrtype"): f = open("/proc/stb/video/hdmi_hdrtype", "r") have_HdmiHdrType = f.read().strip().split(" ") f.close() else: have_HdmiHdrType = False SystemInfo["havehdmihdrtype"] = have_HdmiHdrType if have_HdmiHdrType: def setHdmiHdrType(configElement): try: f = open("/proc/stb/video/hdmi_hdrtype", "w") f.write(configElement.value) f.close() except: pass config.av.hdmihdrtype = ConfigSelection(choices={ "auto": _("Auto"), "dolby": _("dolby"), "none": _("sdr"), "hdr10": _("hdr10"), "hlg": _("hlg")}, default = "auto") config.av.hdmihdrtype.addNotifier(setHdmiHdrType) else: config.av.hdmihdrtype = ConfigNothing() if os.path.exists("/proc/stb/hdmi/hlg_support_choices"): f = open("/proc/stb/hdmi/hlg_support_choices", "r") have_HDRSupport = f.read().strip().split(" ") f.close() else: have_HDRSupport = False SystemInfo["HDRSupport"] = have_HDRSupport if have_HDRSupport: def setHlgSupport(configElement): open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value) config.av.hlg_support = ConfigSelection(default = "auto(EDID)", choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ]) config.av.hlg_support.addNotifier(setHlgSupport) def setHdr10Support(configElement): open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value) config.av.hdr10_support = ConfigSelection(default = "auto(EDID)", choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ]) config.av.hdr10_support.addNotifier(setHdr10Support) def setDisable12Bit(configElement): open("/proc/stb/video/disable_12bit", "w").write(configElement.value) config.av.allow_12bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]); config.av.allow_12bit.addNotifier(setDisable12Bit) def setDisable10Bit(configElement): open("/proc/stb/video/disable_10bit", "w").write(configElement.value) config.av.allow_10bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]); config.av.allow_10bit.addNotifier(setDisable10Bit) if os.path.exists("/proc/stb/hdmi/audio_source"): f = open("/proc/stb/hdmi/audio_source", "r") can_audiosource = f.read().strip().split(" ") f.close() else: can_audiosource = False SystemInfo["Canaudiosource"] = can_audiosource if can_audiosource: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF")}, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices = choice_list, default = "none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices = choice_list, default = "center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices = choice_list, default = "none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default = False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) def setVolumeStepsize(configElement): eDVBVolumecontrol.getInstance().setVolumeSteps(int(configElement.value)) config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default = 5) config.av.volume_stepsize_fastmode = ConfigSelectionNumber(1, 10, 1, default = 5) config.av.volume_hide_mute = ConfigYesNo(default = True) config.av.volume_stepsize.addNotifier(setVolumeStepsize) try: f = open("/proc/stb/audio/ac3_choices", "r") file = f.read()[:-1] f.close() can_downmix_ac3 = "downmix" in file except: can_downmix_ac3 = False SystemInfo["CanPcmMultichannel"] = False SystemInfo["CanDownmixAC3"] = can_downmix_ac3 if can_downmix_ac3: def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'): f.write(configElement.value) else: f.write(configElement.value and "downmix" or "passthrough") f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'): choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.downmix_ac3 = ConfigSelection(choices = choice_list, default = "downmix") else: config.av.downmix_ac3 = ConfigYesNo(default = True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if os.path.exists("/proc/stb/audio/ac3plus_choices"): f = open("/proc/stb/audio/ac3plus_choices", "r") can_ac3plustranscode = f.read().strip().split(" ") f.close() else: can_ac3plustranscode = False SystemInfo["CanAC3plusTranscode"] = can_ac3plustranscode if can_ac3plustranscode: def setAC3plusTranscode(configElement): f = open("/proc/stb/audio/ac3plus", "w") f.write(configElement.value) f.close() if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'): choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI")), ("force_ddp", _("force AC3plus"))] config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3") elif getBoxType() in ('gbquad4k', 'gbue4k'): choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("force_dts", _("convert to DTS"))] config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3") else: choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))] config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3") config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) try: f = open("/proc/stb/audio/dtshd_choices", "r") file = f.read()[:-1] can_dtshd = f.read().strip().split(" ") f.close() except: can_dtshd = False SystemInfo["CanDTSHD"] = can_dtshd if can_dtshd: def setDTSHD(configElement): f = open("/proc/stb/audio/dtshd", "w") f.write(configElement.value) f.close() if getBoxType() in ("dm7080" , "dm820"): choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_dts", _("convert to DTS"))] config.av.dtshd = ConfigSelection(choices = choice_list, default = "use_hdmi_caps") else: choice_list = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.dtshd = ConfigSelection(choices = choice_list, default = "downmix") config.av.dtshd.addNotifier(setDTSHD) try: f = open("/proc/stb/audio/wmapro_choices", "r") file = f.read()[:-1] can_wmapro = f.read().strip().split(" ") f.close() except: can_wmapro = False SystemInfo["CanWMAPRO"] = can_wmapro if can_wmapro: def setWMAPRO(configElement): f = open("/proc/stb/audio/wmapro", "w") f.write(configElement.value) f.close() choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.wmapro = ConfigSelection(choices = choice_list, default = "downmix") config.av.wmapro.addNotifier(setWMAPRO) try: f = open("/proc/stb/audio/dts_choices", "r") file = f.read()[:-1] f.close() can_downmix_dts = "downmix" in file except: can_downmix_dts = False SystemInfo["CanDownmixDTS"] = can_downmix_dts if can_downmix_dts: def setDTSDownmix(configElement): f = open("/proc/stb/audio/dts", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_dts = ConfigYesNo(default = True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: f = open("/proc/stb/audio/aac_choices", "r") file = f.read()[:-1] f.close() can_downmix_aac = "downmix" in file except: can_downmix_aac = False SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800', 'gbquad4k', 'gbue4k'): f.write(configElement.value) else: f.write(configElement.value and "downmix" or "passthrough") f.close() if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'): choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.downmix_aac = ConfigSelection(choices = choice_list, default = "downmix") elif getBoxType() in ('gbquad4k', 'gbue4k'): choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.downmix_aac = ConfigSelection(choices = choice_list, default = "downmix") else: config.av.downmix_aac = ConfigYesNo(default = True) config.av.downmix_aac.addNotifier(setAACDownmix) try: f = open("/proc/stb/audio/aacplus_choices", "r") file = f.read()[:-1] f.close() can_downmix_aacplus = "downmix" in file except: can_downmix_aacplus = False SystemInfo["CanDownmixAACPlus"] = can_downmix_aacplus if can_downmix_aacplus: def setAACDownmixPlus(configElement): f = open("/proc/stb/audio/aacplus", "w") f.write(configElement.value) f.close() choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.downmix_aacplus = ConfigSelection(choices = choice_list, default = "downmix") config.av.downmix_aacplus.addNotifier(setAACDownmixPlus) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices = choice_list, default = "off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[AVSwitch] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X\n" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "[AVSwitch] couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0,26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) iAVSwitch.setConfiguredMode()
def InitAVSwitch(): config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={ "disabled": _("Disabled"), "all": _("All resolutions"), "hd": _("only HD") }, default="disabled") choicelist = [] for i in range(5, 16): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection( default="5", choices=[("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min=0, max=15000, stepwidth=500, default=500, wraparound=True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={ "720p": _("720p"), "1080i": _("1080i") }, default="720p") config.av.autores_480p24 = ConfigSelection(choices={ "480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={ "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_1080p24 = ConfigSelection(choices={ "1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz") }, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={ "1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz") }, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={ "1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz") }, default="1080p30") config.av.autores_2160p24 = ConfigSelection(choices={ "2160p24": _("2160p 24Hz"), "2160p25": _("2160p 25Hz") }, default="2160p24") config.av.autores_2160p25 = ConfigSelection(choices={ "2160p25": _("2160p 25Hz"), "2160p50": _("2160p 50Hz") }, default="2160p25") config.av.autores_2160p30 = ConfigSelection(choices={ "2160p30": _("2160p 30Hz"), "2160p60": _("2160p 60Hz") }, default="2160p30") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic") }, default="16:9") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale") } if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default="panscan") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ( "YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA"): iAVSwitch.setColorFormat(0) else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorspace"): f = open("/proc/stb/video/hdmi_colorspace", "r") have_colorspace = f.read().strip().split(" ") f.close() else: have_colorspace = False SystemInfo["havecolorspace"] = have_colorspace if have_colorspace: def setHDMIColorspace(configElement): try: f = open("/proc/stb/video/hdmi_colorspace", "w") f.write(configElement.value) f.close() except: pass if getBoxType() in ('vusolo4k', 'vuuno4k', 'vuultimo4k'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420") }, default="Edid(Auto)") else: config.av.hdmicolorspace = ConfigSelection(choices={ "auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444") }, default="auto") config.av.hdmicolorspace.addNotifier(setHDMIColorspace) else: config.av.hdmicolorspace = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorimetry"): f = open("/proc/stb/video/hdmi_colorimetry", "r") have_colorimetry = f.read().strip().split(" ") f.close() else: have_colorimetry = False SystemInfo["havecolorimetry"] = have_colorimetry if have_colorimetry: def setHDMIColorimetry(configElement): try: f = open("/proc/stb/video/hdmi_colorimetry", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolorimetry = ConfigSelection(choices={ "Auto": _("Auto"), "bt2020ncl": _("BT 2020 NCL"), "bt2020cl": _("BT 2020 CL"), "bt709": _("BT 709") }, default="Auto") config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry) else: config.av.hdmicolorimetry = ConfigNothing() if os.path.exists("/proc/stb/info/boxmode"): f = open("/proc/stb/info/boxmode", "r") have_boxmode = f.read().strip().split(" ") f.close() else: have_boxmode = False SystemInfo["haveboxmode"] = have_boxmode if have_boxmode: def setBoxmode(configElement): try: f = open("/proc/stb/info/boxmode", "w") f.write(configElement.value) f.close() except: pass config.av.boxmode = ConfigSelection(choices={ "12": _("PIP enabled, no HDR"), "1": _("HDR, 12bit 4:2:0/4:2:2, no PIP") }, default="12") config.av.boxmode.addNotifier(setBoxmode) else: config.av.boxmode = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colordepth"): f = open("/proc/stb/video/hdmi_colordepth", "r") have_HdmiColordepth = f.read().strip().split(" ") f.close() else: have_HdmiColordepth = False SystemInfo["havehdmicolordepth"] = have_HdmiColordepth if have_HdmiColordepth: def setHdmiColordepth(configElement): try: f = open("/proc/stb/video/hdmi_colordepth", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolordepth = ConfigSelection(choices={ "auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit") }, default="auto") config.av.hdmicolordepth.addNotifier(setHdmiColordepth) else: config.av.hdmicolordepth = ConfigNothing() if os.path.exists("/proc/stb/hdmi/audio_source"): f = open("/proc/stb/hdmi/audio_source", "r") can_audiosource = f.read().strip().split(" ") f.close() else: can_audiosource = False SystemInfo["Canaudiosource"] = can_audiosource if can_audiosource: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF") }, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices=choice_list, default="center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices=choice_list, default="none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: f = open("/proc/stb/audio/ac3_choices", "r") file = f.read()[:-1] f.close() can_downmix_ac3 = "downmix" in file except: can_downmix_ac3 = False SystemInfo["CanDownmixAC3"] = can_downmix_ac3 if can_downmix_ac3: def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) try: f = open("/proc/stb/audio/dts_choices", "r") file = f.read()[:-1] f.close() can_downmix_dts = "downmix" in file except: can_downmix_dts = False SystemInfo["CanDownmixDTS"] = can_downmix_dts if can_downmix_dts: def setDTSDownmix(configElement): f = open("/proc/stb/audio/dts", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: f = open("/proc/stb/audio/aac_choices", "r") file = f.read()[:-1] f.close() can_downmix_aac = "downmix" in file except: can_downmix_aac = False SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoHardware] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "[VideoHardware] couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=False) iAVSwitch.setConfiguredMode()
def InitRecordingConfig(): config.recording = ConfigSubsection() config.recording.asktozap = ConfigYesNo(default=True) config.recording.margin_before = ConfigSelectionNumber(min=0, max=120, stepwidth=1, default=3, wraparound=True) config.recording.margin_after = ConfigSelectionNumber(min=0, max=120, stepwidth=1, default=5, wraparound=True) config.recording.ascii_filenames = ConfigYesNo(default=False) config.recording.keep_timers = ConfigSelectionNumber(min=1, max=120, stepwidth=1, default=7, wraparound=True) config.recording.filename_composition = ConfigSelection( default='standard', choices=[('standard', _('standard')), ('veryveryshort', _('Very very short filenames - Warning')), ('veryshort', _('Very short filenames')), ('shortwithtime', _('Short filenames with time')), ('short', _('Short filenames')), ('long', _('Long filenames'))]) config.recording.always_ecm = ConfigYesNo(default=False) config.recording.never_decrypt = ConfigYesNo(default=False) config.recording.offline_decode_delay = ConfigSelectionNumber( min=1, max=10000, stepwidth=10, default=1000, wraparound=True) config.recording.ecm_data = ConfigSelection(choices=[ ('normal', _('normal')), ('descrambled+ecm', _('descramble and record ecm')), ('scrambled+ecm', _("don't descramble, record ecm")) ], default='normal') config.recording.default_timertype = ConfigSelection(choices=[ ('zap', _('zap')), ('record', _('record')), ('zap+record', _('zap and record')) ], default='record') if SystemInfo['DeepstandbySupport']: shutdownString = _('go to deep standby') else: shutdownString = _('shut down') config.recording.default_afterevent = ConfigSelection(choices=[ ('0', _('do nothing')), ('1', _('go to standby')), ('2', shutdownString), ('3', _('auto')) ], default='3') config.recording.include_ait = ConfigYesNo(default=False) config.recording.show_rec_symbol_for_rec_types = ConfigSelection( choices=[('any', _('any recordings')), ('real', _('real recordings')), ('real_streaming', _('real recordings or streaming')), ('real_pseudo', _('real or pseudo recordings'))], default='real_streaming') config.recording.warn_box_restart_rec_types = ConfigSelection( choices=[('any', _('any recordings')), ('real', _('real recordings')), ('real_streaming', _('real recordings or streaming')), ('real_pseudo', _('real or pseudo recordings'))], default='real_streaming') config.recording.ask_to_abort_pseudo_rec = ConfigSelection( choices=[('ask', _('ask user')), ('abort_no_msg', _('just abort, no message')), ('abort_msg', _('just abort, show message')), ('never_abort', _('never abort'))], default='abort_msg') config.recording.ask_to_abort_streaming = ConfigSelection( choices=[('ask', _('ask user')), ('abort_no_msg', _('just abort, no message')), ('abort_msg', _('just abort, show message')), ('never_abort', _('never abort'))], default='abort_msg') config.recording.ask_to_abort_pip = ConfigSelection(choices=[ ('ask', _('ask user')), ('abort_no_msg', _('just abort, no message')), ('abort_msg', _('just abort, show message')), ('never_abort', _('never abort')) ], default='abort_msg') config.recording.prepare_time = ConfigSelectionNumber(min=20, max=120, stepwidth=10, default=20, wraparound=True)
def InitRecordingConfig(): config.recording = ConfigSubsection() # actually this is "recordings always have priority". "Yes" does mean: don't ask. The RecordTimer will ask when value is 0. config.recording.asktozap = ConfigYesNo(default=True) config.recording.margin_before = ConfigSelectionNumber(min=0, max=120, stepwidth=1, default=3, wraparound=True) config.recording.margin_after = ConfigSelectionNumber(min=0, max=120, stepwidth=1, default=5, wraparound=True) config.recording.ascii_filenames = ConfigYesNo(default=False) config.recording.keep_timers = ConfigSelectionNumber(min=1, max=120, stepwidth=1, default=7, wraparound=True) config.recording.filename_composition = ConfigSelection( default="standard", choices=[("standard", _("standard")), ("veryveryshort", _("Very very short filenames - Warning")), ("veryshort", _("Very short filenames")), ("shortwithtime", _("Short filenames with time")), ("short", _("Short filenames")), ("long", _("Long filenames"))]) config.recording.offline_decode_delay = ConfigSelectionNumber( min=1, max=10000, stepwidth=10, default=1000, wraparound=True) config.recording.ecm_data = ConfigSelection(choices=[ ("normal", _("normal")), ("descrambled+ecm", _("descramble and record ecm")), ("scrambled+ecm", _("don't descramble, record ecm")) ], default="normal") config.recording.include_ait = ConfigYesNo(default=False) config.recording.show_rec_symbol_for_rec_types = ConfigSelection( choices=[("any", _("any recordings")), ("real", _("real recordings")), ("real_streaming", _("real recordings or streaming")), ("real_pseudo", _("real or pseudo recordings"))], default="real_streaming") config.recording.warn_box_restart_rec_types = ConfigSelection( choices=[("any", _("any recordings")), ("real", _("real recordings")), ("real_streaming", _("real recordings or streaming")), ("real_pseudo", _("real or pseudo recordings"))], default="real_streaming") config.recording.ask_to_abort_pseudo_rec = ConfigSelection( choices=[("ask", _("ask user")), ("abort_no_msg", _("just abort, no message")), ("abort_msg", _("just abort, show message")), ("never_abort", _("never abort"))], default="abort_msg") config.recording.ask_to_abort_streaming = ConfigSelection( choices=[("ask", _("ask user")), ("abort_no_msg", _("just abort, no message")), ("abort_msg", _("just abort, show message")), ("never_abort", _("never abort"))], default="abort_msg") config.recording.ask_to_abort_pip = ConfigSelection(choices=[ ("ask", _("ask user")), ("abort_no_msg", _("just abort, no message")), ("abort_msg", _("just abort, show message")), ("never_abort", _("never abort")) ], default="abort_msg")
def InitUsageConfig(): try: file = open('/etc/image-version', 'r') lines = file.readlines() file.close() for x in lines: splitted = x.split('=') if splitted[0] == "box_type": folderprefix = splitted[1].replace('\n','') # 0 = release, 1 = experimental boxtype = splitted[1].replace('\n','') # 0 = release, 1 = experimental except: folderprefix="" boxtype="not detected" config.misc.boxtype = ConfigText(default = boxtype) config.usage = ConfigSubsection() config.usage.showdish = ConfigYesNo(default = False) config.usage.subnetwork = ConfigYesNo(default = True) config.usage.subnetwork_cable = ConfigYesNo(default = True) config.usage.subnetwork_terrestrial = ConfigYesNo(default = True) config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))]) config.usage.multibouquet = ConfigYesNo(default = True) config.usage.alternative_number_mode = ConfigYesNo(default = False) def alternativeNumberModeChange(configElement): eDVBDB.getInstance().setNumberingMode(configElement.value) refreshServiceList() config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange) config.usage.servicelist_twolines = ConfigYesNo(default = False) config.usage.servicelist_twolines.addNotifier(refreshServiceList) config.usage.hide_number_markers = ConfigYesNo(default = True) config.usage.hide_number_markers.addNotifier(refreshServiceList) config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.servicetype_icon_mode.addNotifier(refreshServiceList) config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.crypto_icon_mode.addNotifier(refreshServiceList) config.usage.record_indicator_mode = ConfigSelection(default = "2", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))]) config.usage.record_indicator_mode.addNotifier(refreshServiceList) choicelist = [("-1", _("Disabled"))] for i in range(0,1300,100): choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i)) config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist) config.usage.servicelist_column.addNotifier(refreshServiceList) config.usage.servicelist_eventinfo_delay = ConfigSelectionNumber(50, 1000, 50, default=150) config.usage.service_icon_enable = ConfigYesNo(default = False) config.usage.service_icon_enable.addNotifier(refreshServiceList) config.usage.servicelist_cursor_behavior = ConfigSelection(default = "keep", choices = [ ("standard", _("Standard")), ("keep", _("Keep service")), ("reverseB", _("Reverse bouquet buttons")), ("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))]) choicelist = [("by skin", _("As defined by the skin"))] for i in range (5,41): choicelist.append((str(i))) config.usage.servicelist_number_of_services = ConfigSelection(default = "by skin", choices = choicelist) config.usage.servicelist_number_of_services.addNotifier(refreshServiceList) config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False) config.usage.quickzap_bouquet_change = ConfigYesNo(default = False) config.usage.e1like_radio_mode = ConfigYesNo(default = True) choicelist = [("0", _("No timeout"))] for i in range(1, 12): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist) config.usage.show_infobar_do_dimming = ConfigYesNo(default = False) config.usage.show_infobar_dimming_speed = ConfigSelectionNumber(min = 1, max = 20, stepwidth = 1, default = 3, wraparound = True) config.usage.show_infobar_on_zap = ConfigYesNo(default = True) config.usage.show_infobar_on_skip = ConfigYesNo(default = True) config.usage.show_infobar_on_event_change = ConfigYesNo(default = False) config.usage.show_second_infobar = ConfigSelection(default = "0", choices = [("", _("None"))] + choicelist + [("EPG",_("EPG"))]) config.usage.show_simple_second_infobar = ConfigYesNo(default = False) config.usage.infobar_frontend_source = ConfigSelection(default = "settings", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))]) config.usage.oldstyle_zap_controls = ConfigYesNo(default = False) config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False) config.usage.zap_with_ch_buttons = ConfigYesNo(default = True) config.usage.ok_is_channelselection = ConfigYesNo(default = False) config.usage.volume_instead_of_channelselection = ConfigYesNo(default = False) config.usage.channelselection_preview = ConfigYesNo(default = False) config.usage.show_spinner = ConfigYesNo(default = True) config.usage.menu_sort_weight = ConfigDictionarySet(default = { "mainmenu" : {"submenu" : {} }}) config.usage.menu_sort_mode = ConfigSelection(default = "default", choices = [("a_z", _("alphabetical")), ("default", _("Default")), ("user", _("user defined")), ("user_hidden", _("user defined hidden"))]) config.usage.menu_show_numbers = ConfigSelection(default = "no", choices = [("no", _("no")), ("menu&plugins", _("in menu and plugins")), ("menu", _("in menu only")), ("plugins", _("in plugins only"))]) config.usage.menu_path = ConfigSelection(default = "off", choices = [ ("off", _("Disabled")), ("small", _("Small")), ("large", _("Large")),]) config.usage.sort_settings = ConfigYesNo(default = False) config.usage.sort_pluginlist = ConfigYesNo(default = True) config.usage.enable_tt_caching = ConfigYesNo(default = True) choicelist = [] for i in (10, 30): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300, 600, 1200, 1800): m = i / 60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) for i in (3600, 7200, 14400): h = i / 3600 choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h)) config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist) config.usage.output_12V = ConfigSelection(default = "do not change", choices = [ ("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ]) config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("swap", _("Swap PiP and main picture")), ("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ]) config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [ ("no", _("no")), ("popup", _("With popup")), ("without popup", _("Without popup")) ]) choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))] for i in [60, 300, 600, 900, 1800, 2700, 3600]: m = i/60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) config.usage.pip_last_service_timeout = ConfigSelection(default = "-1", choices = choicelist) config.usage.default_path = ConfigText(default = "") config.usage.timer_path = ConfigText(default = "<default>") config.usage.instantrec_path = ConfigText(default = "<default>") config.usage.timeshift_path = ConfigText(default = "/media/hdd/") config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"]) config.usage.movielist_trashcan = ConfigYesNo(default=True) config.usage.movielist_trashcan_days = ConfigNumber(default=8) config.usage.movielist_trashcan_reserve = ConfigNumber(default=40) config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [ ("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")), ("ask no", _("Ask user") + " " + _("default") + " " + _("no")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning"))]) config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ]) config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")), ("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))]) config.usage.next_movie_msg = ConfigYesNo(default = True) config.usage.last_movie_played = ConfigText() config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [ ("no", _("no")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ]) config.usage.setup_level = ConfigSelection(default = "expert", choices = [ ("simple", _("Simple")), ("intermediate", _("Intermediate")), ("expert", _("Expert")) ]) config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [ ("no", _("no")), ("yes", _("yes")), ("except", _("No, except Wakeup timer")) ]) config.usage.wakeup_enabled = ConfigSelection(default = "no", choices = [ ("no", _("Disabled")), ("yes", _("Enabled")), ("standby", _("Enabled, only from standby")), ("deepstandby", _("Enabled, only from deep standby")) ]) config.usage.wakeup_day = ConfigSubDict() config.usage.wakeup_time = ConfigSubDict() for i in range(7): config.usage.wakeup_day[i] = ConfigEnableDisable(default = False) config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60)) choicelist = [("0", _("Disabled"))] for i in range(3600, 21601, 3600): h = abs(i / 3600) h = ngettext("%d hour", "%d hours", h) % h choicelist.append((str(i), _("Standby in ") + h)) config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist) config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True) config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_by_weekdays = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_begin_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_end_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_begin_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_end_day = ConfigSubDict() for i in range(7): config.usage.inactivity_timer_blocktime_day[i] = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_day[i] = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_extra_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))] for i in range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append((str(i), _("Standby in ") + m)) config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist) choicelist = [("0", _("Disabled"))] for i in [300, 600] + range(900, 14401, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append((str(i), _("after ") + m)) config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist) config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = False) config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled"))] for m in (1, 5, 10, 15, 30, 60): choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m)) config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist) config.usage.check_timeshift = ConfigYesNo(default = True) choicelist = [("0", _("Disabled"))] for i in (2, 3, 4, 5, 10, 20, 30): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300): m = i / 60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist) config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [ ("0", "DVB-S/-C/-T"), ("1", "DVB-S/-T/-C"), ("2", "DVB-C/-S/-T"), ("3", "DVB-C/-T/-S"), ("4", "DVB-T/-C/-S"), ("5", "DVB-T/-S/-C"), ("127", _("No priority")) ]) def remote_fallback_changed(configElement): if configElement.value: configElement.value = "%s%s" % (not configElement.value.startswith("http://") and "http://" or "", configElement.value) configElement.value = "%s%s" % (configElement.value, configElement.value.count(":") == 1 and ":8001" or "") config.usage.remote_fallback_enabled = ConfigYesNo(default = False) config.usage.remote_fallback = ConfigText(default = "http://IP-ADRESS:8001", fixed_size = False) config.usage.remote_fallback.addNotifier(remote_fallback_changed, immediate_feedback=False) config.usage.remote_fallback_import_url = ConfigText(default = "", fixed_size = False) config.usage.remote_fallback_import_url.addNotifier(remote_fallback_changed, immediate_feedback=False) config.usage.remote_fallback_alternative = ConfigYesNo(default = False) config.usage.remote_fallback_dvb_t = ConfigText(default = "", fixed_size = False) config.usage.remote_fallback_dvb_t.addNotifier(remote_fallback_changed, immediate_feedback=False) config.usage.remote_fallback_dvb_c = ConfigText(default = "", fixed_size = False) config.usage.remote_fallback_dvb_c.addNotifier(remote_fallback_changed, immediate_feedback=False) config.usage.remote_fallback_atsc = ConfigText(default = "", fixed_size = False) config.usage.remote_fallback_atsc.addNotifier(remote_fallback_changed, immediate_feedback=False) config.usage.remote_fallback_import = ConfigSelection(default = "", choices = [("", _("No")), ("channels", _("Channels only")), ("channels_epg", _("Channels and EPG")), ("epg", _("EPG only"))]) config.usage.remote_fallback_import_restart = ConfigYesNo(default = False) config.usage.remote_fallback_import_standby = ConfigYesNo(default = False) config.usage.remote_fallback_ok = ConfigYesNo(default = False) config.usage.remote_fallback_nok = ConfigYesNo(default = False) config.usage.remote_fallback_extension_menu = ConfigYesNo(default = False) config.usage.remote_fallback_external_timer = ConfigYesNo(default = False) config.usage.remote_fallback_openwebif_customize = ConfigYesNo(default = False) config.usage.remote_fallback_openwebif_userid = ConfigText(default = "root") config.usage.remote_fallback_openwebif_password = ConfigPassword(default = "default") config.usage.remote_fallback_openwebif_port = ConfigInteger(default=80, limits=(0,65535)) config.usage.show_timer_conflict_warning = ConfigYesNo(default = True) dvbs_nims = [("-2", _("Disabled"))] dvbt_nims = [("-2", _("Disabled"))] dvbc_nims = [("-2", _("Disabled"))] atsc_nims = [("-2", _("Disabled"))] nims = [("-1", _("auto"))] for x in nimmanager.nim_slots: if x.isCompatible("DVB-S"): dvbs_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("DVB-T"): dvbt_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("DVB-C"): dvbc_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("ATSC"): atsc_nims.append((str(x.slot), x.getSlotName())) nims.append((str(x.slot), x.getSlotName())) config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims)) nims.insert(0,("-2", _("Disabled"))) config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims) config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims)) dvbs_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims) config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims)) dvbt_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims) config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims)) dvbc_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims) config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims)) atsc_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims) SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and any(len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims)) SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims)) SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims)) SystemInfo["ATSC_priority_tuner_available"] = len(atsc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims)) config.misc.disable_background_scan = ConfigYesNo(default = False) config.misc.use_ci_assignment = ConfigYesNo(default = False) config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [ ('barleft', _("Progress bar left")), ('barright', _("Progress bar right")), ('percleft', _("Percentage left")), ('percright', _("Percentage right")), ('no', _("no")) ]) config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True) config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList) config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList) config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False) config.usage.show_message_when_recording_starts = ConfigYesNo(default = True) config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True) config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [ ('o', _("Off")), ('p', _("Progress")), ('s', _("Small progress")), ('i', _("Icons")), ]) config.usage.movielist_unseen = ConfigYesNo(default = False) config.usage.swap_snr_on_osd = ConfigYesNo(default = False) config.usage.maxchannelnumlen = ConfigSelection(default = "5", choices = [("4", _("4")), ("5", _("5"))]) config.usage.numzaptimeoutmode = ConfigSelection(default = "standard", choices = [("standard", _("Standard")), ("userdefined", _("User defined")), ("off", _("off"))]) choicelist = [] for i in range(750, 5001, 250): choicelist.append(("%d" % i, "%d ms" % i)) config.usage.numzaptimeout1 = ConfigSelection(default = "3000", choices = choicelist) config.usage.numzaptimeout2 = ConfigSelection(default = "1000", choices = choicelist) def SpinnerOnOffChanged(configElement): setSpinnerOnOff(int(configElement.value)) config.usage.show_spinner.addNotifier(SpinnerOnOffChanged) def EnableTtCachingChanged(configElement): setEnableTtCachingOnOff(int(configElement.value)) config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged) def TunerTypePriorityOrderChanged(configElement): setTunerTypePriorityOrder(int(configElement.value)) config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False) def PreferredTunerChanged(configElement): setPreferredTuner(int(configElement.value)) config.usage.frontend_priority.addNotifier(PreferredTunerChanged) config.usage.show_picon_in_display = ConfigYesNo(default = True) config.usage.hide_zap_errors = ConfigYesNo(default = True) config.misc.use_ci_assignment = ConfigYesNo(default = True) config.usage.hide_ci_messages = ConfigYesNo(default = False) config.usage.show_cryptoinfo = ConfigYesNo(default = True) config.usage.show_eit_nownext = ConfigYesNo(default = True) config.usage.show_vcr_scart = ConfigYesNo(default = False) config.usage.show_update_disclaimer = ConfigYesNo(default = True) config.usage.pic_resolution = ConfigSelection(default=None, choices=[(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")][:SystemInfo["HasFullHDSkinSupport"] and 4 or 3]) if SystemInfo["Bootvideo"]: config.usage.show_bootvideo = ConfigYesNo(default = False) if SystemInfo["Fan"]: choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))] if os.path.exists("/proc/stb/fp/fan_choices"): choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")] config.usage.fan = ConfigSelection(choicelist) def fanChanged(configElement): open(SystemInfo["Fan"], "w").write(configElement.value) config.usage.fan.addNotifier(fanChanged) if SystemInfo["FanPWM"]: def fanSpeedChanged(configElement): open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:]) config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255)) config.usage.fanspeed.addNotifier(fanSpeedChanged) if SystemInfo["PowerLED"]: def powerLEDChanged(configElement): open(SystemInfo["PowerLED"], "w").write(configElement.value and "on" or "off") config.usage.powerLED = ConfigYesNo(default = True) config.usage.powerLED.addNotifier(powerLEDChanged) if SystemInfo["StandbyLED"]: def standbyLEDChanged(configElement): open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off") config.usage.standbyLED = ConfigYesNo(default = True) config.usage.standbyLED.addNotifier(standbyLEDChanged) if SystemInfo["SuspendLED"]: def suspendLEDChanged(configElement): open(SystemInfo["SuspendLED"], "w").write(configElement.value and "on" or "off") config.usage.suspendLED = ConfigYesNo(default = True) config.usage.suspendLED.addNotifier(suspendLEDChanged) if SystemInfo["PowerOffDisplay"]: def powerOffDisplayChanged(configElement): open(SystemInfo["PowerOffDisplay"], "w").write(configElement.value and "1" or "0") config.usage.powerOffDisplay = ConfigYesNo(default = True) config.usage.powerOffDisplay.addNotifier(powerOffDisplayChanged) if SystemInfo["LCDshow_symbols"]: def lcdShowSymbols(configElement): open(SystemInfo["LCDshow_symbols"], "w").write(configElement.value and "1" or "0") config.usage.lcd_show_symbols = ConfigYesNo(default = True) config.usage.lcd_show_symbols.addNotifier(lcdShowSymbols) config.network = ConfigSubsection() if SystemInfo["WakeOnLAN"]: def wakeOnLANChanged(configElement): open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off") config.network.wol = ConfigYesNo(default = False) config.network.wol.addNotifier(wakeOnLANChanged) if SystemInfo["hasXcoreVFD"]: def set12to8characterVFD(configElement): open(SystemInfo["hasXcoreVFD"], "w").write(not configElement.value and "1" or "0") config.usage.toggle12to8characterVFD = ConfigYesNo(default = False) config.usage.toggle12to8characterVFD.addNotifier(set12to8characterVFD) if SystemInfo["LcdLiveTVMode"]: def setLcdLiveTVMode(configElement): open(SystemInfo["LcdLiveTVMode"], "w").write(configElement.value) config.usage.LcdLiveTVMode = ConfigSelection(default = "0", choices=[str(x) for x in range(0,9)]) config.usage.LcdLiveTVMode.addNotifier(setLcdLiveTVMode) if SystemInfo["LcdLiveDecoder"]: def setLcdLiveDecoder(configElement): open(SystemInfo["LcdLiveDecoder"], "w").write(configElement.value) config.usage.LcdLiveDecoder = ConfigSelection(default = "0", choices=[str(x) for x in range(0,4)]) config.usage.LcdLiveDecoder.addNotifier(setLcdLiveDecoder) config.usage.boolean_graphic = ConfigSelection(default="true", choices={"false": _("no"), "true": _("yes"), "only_bool": _("yes, but not in multi selections")}) config.epg = ConfigSubsection() config.epg.eit = ConfigYesNo(default = True) config.epg.mhw = ConfigYesNo(default = False) config.epg.freesat = ConfigYesNo(default = False) config.epg.viasat = ConfigYesNo(default = False) config.epg.netmed = ConfigYesNo(default = False) config.epg.virgin = ConfigYesNo(default = False) config.epg.saveepg = ConfigYesNo(default = True) config.epg.opentv = ConfigYesNo(default = False) config.misc.showradiopic = ConfigYesNo(default = True) def EpgSettingsChanged(configElement): from enigma import eEPGCache mask = 0xffffffff if not config.epg.eit.value: mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER) if not config.epg.mhw.value: mask &= ~eEPGCache.MHW if not config.epg.freesat.value: mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER) if not config.epg.viasat.value: mask &= ~eEPGCache.VIASAT if not config.epg.netmed.value: mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER) if not config.epg.virgin.value: mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE) if not config.epg.opentv.value: mask &= ~eEPGCache.OPENTV eEPGCache.getInstance().setEpgSources(mask) config.epg.eit.addNotifier(EpgSettingsChanged) config.epg.mhw.addNotifier(EpgSettingsChanged) config.epg.freesat.addNotifier(EpgSettingsChanged) config.epg.viasat.addNotifier(EpgSettingsChanged) config.epg.netmed.addNotifier(EpgSettingsChanged) config.epg.virgin.addNotifier(EpgSettingsChanged) config.epg.opentv.addNotifier(EpgSettingsChanged) config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True) def EpgHistorySecondsChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60) config.epg.histminutes.addNotifier(EpgHistorySecondsChanged) config.epg.cacheloadsched = ConfigYesNo(default = False) config.epg.cachesavesched = ConfigYesNo(default = False) def EpgCacheLoadSchedChanged(configElement): import EpgLoadSave EpgLoadSave.EpgCacheLoadCheck() def EpgCacheSaveSchedChanged(configElement): import EpgLoadSave EpgLoadSave.EpgCacheSaveCheck() config.epg.cacheloadsched.addNotifier(EpgCacheLoadSchedChanged, immediate_feedback = False) config.epg.cachesavesched.addNotifier(EpgCacheSaveSchedChanged, immediate_feedback = False) config.epg.cacheloadtimer = ConfigSelectionNumber(default = 6, stepwidth = 1, min = 1, max = 24, wraparound = True) config.epg.cachesavetimer = ConfigSelectionNumber(default = 3, stepwidth = 1, min = 1, max = 24, wraparound = True) def setHDDStandby(configElement): for hdd in harddiskmanager.HDDList(): hdd[1].setIdleTime(int(configElement.value)) config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False) if SystemInfo["12V_Output"]: def set12VOutput(configElement): Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0) config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False) config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml")) config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml")) config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))]) config.seek = ConfigSubsection() config.seek.selfdefined_13 = ConfigNumber(default=15) config.seek.selfdefined_46 = ConfigNumber(default=60) config.seek.selfdefined_79 = ConfigNumber(default=300) config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25]) config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.on_pause = ConfigSelection(default = "play", choices = [ ("play", _("Play")), ("step", _("Single step (GOP)")), ("last", _("Last speed")) ]) config.crash = ConfigSubsection() config.crash.enabledebug = ConfigYesNo(default = False) debugpath = [('/home/root/logs/', '/home/root/')] for p in harddiskmanager.getMountedPartitions(): d = os.path.normpath(p.mountpoint) if os.path.exists(p.mountpoint): if p.mountpoint != '/': debugpath.append((d + '/logs/', p.mountpoint)) config.crash.debug_path = ConfigSelection(default = "/home/root/logs/", choices = debugpath) def updatedebug_path(configElement): if not os.path.exists(config.crash.debug_path.getValue()): os.mkdir(config.crash.debug_path.getValue(),0755) config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback = False) crashlogheader = _("We are really sorry. Your receiver encountered " \ "a software problem, and needs to be restarted.\n" \ "Please send the logfile %senigma2_crash_xxxxxx.log to www.teamblue.tech.\n" \ "Your receiver restarts in 10 seconds!\n" \ "Component: enigma2") % config.crash.debug_path.value config.crash.debug_text = ConfigText(default=crashlogheader, fixed_size=False) def updateEnterForward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_forward, configElement.value) config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False) def updateEnterBackward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_backward, configElement.value) config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False) def updateEraseSpeed(el): eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value)) def updateEraseFlags(el): eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value)) config.misc.erase_speed = ConfigSelection(default="20", choices = [ ("10", "10 MB/s"), ("20", "20 MB/s"), ("50", "50 MB/s"), ("100", "100 MB/s")]) config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False) config.misc.erase_flags = ConfigSelection(default="1", choices = [ ("0", _("Disabled")), ("1", _("Internal hdd only")), ("3", _("Everywhere"))]) config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False) if SystemInfo["ZapMode"]: def setZapmode(el): open(SystemInfo["ZapMode"], "w").write(el.value) config.misc.zapmode = ConfigSelection(default = "mute", choices = [ ("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))]) config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False) if SystemInfo["VFD_scroll_repeats"]: def scroll_repeats(el): open(SystemInfo["VFD_scroll_repeats"], "w").write(el.value) choicelist = [] for i in range(1, 11, 1): choicelist.append((str(i))) config.usage.vfd_scroll_repeats = ConfigSelection(default = "3", choices = choicelist) config.usage.vfd_scroll_repeats.addNotifier(scroll_repeats, immediate_feedback = False) if SystemInfo["VFD_scroll_delay"]: def scroll_delay(el): open(SystemInfo["VFD_scroll_delay"], "w").write(el.value) choicelist = [] for i in range(0, 1001, 50): choicelist.append((str(i))) config.usage.vfd_scroll_delay = ConfigSelection(default = "150", choices = choicelist) config.usage.vfd_scroll_delay.addNotifier(scroll_delay, immediate_feedback = False) if SystemInfo["VFD_initial_scroll_delay"]: def initial_scroll_delay(el): open(SystemInfo["VFD_initial_scroll_delay"], "w").write(el.value) choicelist = [] for i in range(0, 20001, 500): choicelist.append((str(i))) config.usage.vfd_initial_scroll_delay = ConfigSelection(default = "1000", choices = choicelist) config.usage.vfd_initial_scroll_delay.addNotifier(initial_scroll_delay, immediate_feedback = False) if SystemInfo["VFD_final_scroll_delay"]: def final_scroll_delay(el): open(SystemInfo["VFD_final_scroll_delay"], "w").write(el.value) choicelist = [] for i in range(0, 20001, 500): choicelist.append((str(i))) config.usage.vfd_final_scroll_delay = ConfigSelection(default = "1000", choices = choicelist) config.usage.vfd_final_scroll_delay.addNotifier(final_scroll_delay, immediate_feedback = False) if SystemInfo["HasBypassEdidChecking"]: def setHasBypassEdidChecking(configElement): open(SystemInfo["HasBypassEdidChecking"], "w").write(configElement.value) config.av.bypassEdidChecking = ConfigSelection(default = "00000000", choices = [ ("00000001", _("yes")), ("00000000", _("no"))] ) config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking) if SystemInfo["HasColorspace"]: def setHaveColorspace(configElement): open(SystemInfo["HasColorspace"], "w").write(configElement.value) if SystemInfo["HasColorspaceSimple"]: config.av.hdmicolorspace = ConfigSelection(default = "Edid(Auto)", choices={"Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420")}) else: # config.av.hdmicolorspace = ConfigSelection(default = "auto", choices={"auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444")}) config.av.hdmicolorspace = ConfigSelection(default = "Edid(Auto)", choices={"Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "Itu_R_BT_709": _("Itu_R_BT_709"), "Unknown": _("Unknown")}) config.av.hdmicolorspace.addNotifier(setHaveColorspace) if SystemInfo["HasColordepth"]: def setHaveColordepth(configElement): open(SystemInfo["HasColordepth"], "w").write(configElement.value) config.av.hdmicolordepth = ConfigSelection(default = "auto", choices={"auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit")}) config.av.hdmicolordepth.addNotifier(setHaveColordepth) if SystemInfo["HasHDMIpreemphasis"]: def setHDMIpreemphasis(configElement): open(SystemInfo["HasHDMIpreemphasis"], "w").write(configElement.value) config.av.hdmipreemphasis = ConfigSelection(default = "off", choices = [ ("on", _("yes")), ("off", _("no"))] ) config.av.hdmipreemphasis.addNotifier(setHDMIpreemphasis) if SystemInfo["HasColorimetry"]: def setColorimetry(configElement): open(SystemInfo["HasColorimetry"], "w").write(configElement.value) config.av.hdmicolorimetry = ConfigSelection(default = "auto", choices = [("auto", _("Auto")), ("bt2020ncl", _("BT 2020 NCL")), ("bt2020cl", _("BT 2020 CL")), ("bt709", _("BT 709"))]) config.av.hdmicolorimetry.addNotifier(setColorimetry) if SystemInfo["HasHdrType"]: def setHdmiHdrType(configElement): open(SystemInfo["HasHdrType"], "w").write(configElement.value) config.av.hdmihdrtype = ConfigSelection(default = "auto", choices={"auto": _("Auto"), "none": _("SDR"), "hdr10": _("HDR10"), "hlg": _("HLG"), "dolby": _("Dolby")}) config.av.hdmihdrtype.addNotifier(setHdmiHdrType) if SystemInfo["HDRSupport"]: def setHlgSupport(configElement): open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value) config.av.hlg_support = ConfigSelection(default = "auto(EDID)", choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ]) config.av.hlg_support.addNotifier(setHlgSupport) def setHdr10Support(configElement): open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value) config.av.hdr10_support = ConfigSelection(default = "auto(EDID)", choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ]) config.av.hdr10_support.addNotifier(setHdr10Support) def setDisable12Bit(configElement): open("/proc/stb/video/disable_12bit", "w").write(configElement.value) config.av.allow_12bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]); config.av.allow_12bit.addNotifier(setDisable12Bit) def setDisable10Bit(configElement): open("/proc/stb/video/disable_10bit", "w").write(configElement.value) config.av.allow_10bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]); config.av.allow_10bit.addNotifier(setDisable10Bit) config.subtitles = ConfigSubsection() config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("original")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False) config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50") config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center") config.subtitles.subtitle_rewrap = ConfigYesNo(default = False) config.subtitles.colourise_dialogs = ConfigYesNo(default = False) config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3") config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40") config.subtitles.showbackground = ConfigYesNo(default = False) subtitle_delay_choicelist = [] for i in range(-900000, 1845000, 45000): if i == 0: subtitle_delay_choicelist.append(("0", _("No delay"))) else: subtitle_delay_choicelist.append((str(i), "%2.1f sec" % (i / 90000.))) config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False) config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))]) config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = False) config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [ ("0", _("No transparency")), ("25", "10%"), ("50", "20%"), ("75", "30%"), ("100", "40%"), ("125", "50%"), ("150", "60%"), ("175", "70%"), ("200", "80%"), ("225", "90%"), ("255", _("Full transparency"))]) config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("alternative")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True) config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [ ("1", _("Original")), ("23976", _("23.976")), ("24000", _("24")), ("25000", _("25")), ("29970", _("29.97")), ("30000", _("30"))]) config.subtitles.pango_subtitle_removehi = ConfigYesNo(default = False) config.subtitles.pango_autoturnon = ConfigYesNo(default = True) config.autolanguage = ConfigSubsection() audio_language_choices=[ ("", _("None")), ("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")), ("ara", _("Arabic")), ("eus baq", _("Basque")), ("bul", _("Bulgarian")), ("hrv", _("Croatian")), ("chn sgp", _("Chinese - Simplified")), ("twn hkn",_("Chinese - Traditional")), ("ces cze", _("Czech")), ("dan", _("Danish")), ("dut ndl nld", _("Dutch")), ("eng qaa", _("English")), ("est", _("Estonian")), ("fin", _("Finnish")), ("fra fre", _("French")), ("deu ger", _("German")), ("ell gre grc", _("Greek")), ("heb", _("Hebrew")), ("hun", _("Hungarian")), ("ita", _("Italian")), ("lav", _("Latvian")), ("lit", _("Lithuanian")), ("ltz", _("Luxembourgish")), ("nor", _("Norwegian")), ("fas per fa pes", _("Persian")), ("pol", _("Polish")), ("por dub Dub DUB ud1", _("Portuguese")), ("ron rum", _("Romanian")), ("rus", _("Russian")), ("srp", _("Serbian")), ("slk slo", _("Slovak")), ("slv", _("Slovenian")), ("spa", _("Spanish")), ("swe", _("Swedish")), ("tha", _("Thai")), ("tur Audio_TUR", _("Turkish")), ("ukr Ukr", _("Ukrainian")), ("NAR", _("Visual impaired commentary"))] epg_language_choices = audio_language_choices[:1] + audio_language_choices [2:] def setEpgLanguage(configElement): eServiceEvent.setEPGLanguage(configElement.value) def setEpgLanguageAlternative(configElement): eServiceEvent.setEPGLanguageAlternative(configElement.value) def epglanguage(configElement): config.autolanguage.audio_epglanguage.setChoices([x for x in epg_language_choices if x[0] and x[0] != config.autolanguage.audio_epglanguage_alternative.value or not x[0] and not config.autolanguage.audio_epglanguage_alternative.value]) config.autolanguage.audio_epglanguage_alternative.setChoices([x for x in epg_language_choices if x[0] and x[0] != config.autolanguage.audio_epglanguage.value or not x[0]]) config.autolanguage.audio_epglanguage = ConfigSelection(epg_language_choices, default="") config.autolanguage.audio_epglanguage_alternative = ConfigSelection(epg_language_choices, default="") config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage) config.autolanguage.audio_epglanguage.addNotifier(epglanguage, initial_call=False) config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative) config.autolanguage.audio_epglanguage_alternative.addNotifier(epglanguage) def getselectedlanguages(range): return [eval("config.autolanguage.audio_autoselect%x.value" % x) for x in range] def autolanguage(configElement): config.autolanguage.audio_autoselect1.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((2,3,4)) or not x[0] and not config.autolanguage.audio_autoselect2.value]) config.autolanguage.audio_autoselect2.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,3,4)) or not x[0] and not config.autolanguage.audio_autoselect3.value]) config.autolanguage.audio_autoselect3.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,2,4)) or not x[0] and not config.autolanguage.audio_autoselect4.value]) config.autolanguage.audio_autoselect4.setChoices([x for x in audio_language_choices if x[0] and x[0] not in getselectedlanguages((1,2,3)) or not x[0]]) config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="") config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="") config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="") config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="") config.autolanguage.audio_autoselect1.addNotifier(autolanguage, initial_call=False) config.autolanguage.audio_autoselect2.addNotifier(autolanguage, initial_call=False) config.autolanguage.audio_autoselect3.addNotifier(autolanguage, initial_call=False) config.autolanguage.audio_autoselect4.addNotifier(autolanguage) config.autolanguage.audio_defaultac3 = ConfigYesNo(default = True) config.autolanguage.audio_defaultddp = ConfigYesNo(default = False) config.autolanguage.audio_usecache = ConfigYesNo(default = True) subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:] def getselectedsublanguages(range): return [eval("config.autolanguage.subtitle_autoselect%x.value" % x) for x in range] def autolanguagesub(configElement): config.autolanguage.subtitle_autoselect1.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((2,3,4)) or not x[0] and not config.autolanguage.subtitle_autoselect2.value]) config.autolanguage.subtitle_autoselect2.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,3,4)) or not x[0] and not config.autolanguage.subtitle_autoselect3.value]) config.autolanguage.subtitle_autoselect3.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,2,4)) or not x[0] and not config.autolanguage.subtitle_autoselect4.value]) config.autolanguage.subtitle_autoselect4.setChoices([x for x in subtitle_language_choices if x[0] and x[0] not in getselectedsublanguages((1,2,3)) or not x[0]]) choicelist = [('0', _("None"))] for y in range(1, 15 if config.autolanguage.subtitle_autoselect4.value else (7 if config.autolanguage.subtitle_autoselect3.value else(4 if config.autolanguage.subtitle_autoselect2.value else (2 if config.autolanguage.subtitle_autoselect1.value else 0)))): choicelist.append((str(y), ", ".join([eval("config.autolanguage.subtitle_autoselect%x.getText()" % x) for x in (y & 1, y & 2, y & 4 and 3, y & 8 and 4) if x]))) if config.autolanguage.subtitle_autoselect3.value: choicelist.append((str(y+1), "All")) config.autolanguage.equal_languages.setChoices(choicelist, default="0") config.autolanguage.equal_languages = ConfigSelection(default="0", choices=[str(x) for x in range(0, 16)]) config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="") config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="") config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="") config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="") config.autolanguage.subtitle_autoselect1.addNotifier(autolanguagesub, initial_call=False) config.autolanguage.subtitle_autoselect2.addNotifier(autolanguagesub, initial_call=False) config.autolanguage.subtitle_autoselect3.addNotifier(autolanguagesub, initial_call=False) config.autolanguage.subtitle_autoselect4.addNotifier(autolanguagesub) config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False) config.autolanguage.subtitle_usecache = ConfigYesNo(default = True) config.streaming = ConfigSubsection() config.streaming.stream_ecm = ConfigYesNo(default = False) config.streaming.descramble = ConfigYesNo(default = True) config.streaming.descramble_client = ConfigYesNo(default = False) config.streaming.stream_eit = ConfigYesNo(default = True) config.streaming.stream_ait = ConfigYesNo(default = True) config.streaming.authentication = ConfigYesNo(default = False) config.mediaplayer = ConfigSubsection() config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False) config.mediaplayer.alternateUserAgent = ConfigText(default="")
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")} # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.getValue(): colorformat_choices["yuv"] = _("YPbPr") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox")}, default = "16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic")}, default = "auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale")} if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale")} if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "pillarbox") config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal") config.av.wss = ConfigEnableDisable(default = True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.vcrswitch = ConfigEnableDisable(default = False) iAVSwitch = AVSwitch() def setColorFormat(configElement): if getBoxType() == 'et6x00': map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif getBoxType() == 'gbquad' or getBoxType().startswith('et'): map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.getValue()]) def setAspectRatio(configElement): map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6} iAVSwitch.setAspectRatio(map[configElement.getValue()]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm" : 2} iAVSwitch.setSystem(map[configElement.getValue()]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup if getBoxType() == 'gbquad' or getBoxType() == 'et5x00' or getBoxType() == 'ixussone' or getBoxType() == 'ixusszero' or model == 'et6000' or getBoxType() == 'e3hd': detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on")}, default = "00000000") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices = choice_list, default = "none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() try: f = open("/proc/stb/audio/ac3_choices", "r") file = f.read()[:-1] f.close() can_downmix = file.find("downmix") != -1 except: can_downmix = False SystemInfo["CanDownmixAC3"] = can_downmix if can_downmix: def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_ac3 = ConfigYesNo(default = True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.getValue()) try: print "--> setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "couldn't write pep_scaler_sharpness" if getBoxType() == 'gbquad': config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing())
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": "CVBS"} # when YUV, Scart or S-Video is not support by HW, don't let the user select it if SystemInfo["HasYPbPr"]: colorformat_choices["yuv"] = "YPbPr" if SystemInfo["HasScart"]: colorformat_choices["rgb"] = "RGB" if SystemInfo["HasSVideo"]: colorformat_choices["svideo"] = "S-Video" config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": "16:9", "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4_3": "4:3", "16_9": "16:9", "16_10": "16:10", "auto": _("automatic") }, default="auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "full" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy2_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "nonlinear" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) policy_choices.update({"nonlinear": _("Nonlinear")}) except: pass try: if "full" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": "PAL", "ntsc": "NTSC", "multinorm": "multinorm" }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() def readChoices(procx, choices, default): try: with open(procx, "r") as myfile: procChoices = myfile.read().strip() except: procChoices = "" if procChoices: choiceslist = procChoices.split(" ") choices = [(item, _(item)) for item in choiceslist] default = choiceslist[0] return (choices, default) if SystemInfo["HasMultichannelPCM"]: def setMultichannelPCM(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.multichannel_pcm = ConfigYesNo(default=False) config.av.multichannel_pcm.addNotifier(setMultichannelPCM) if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/ac3_choices" (choices, default) = readChoices(f, choices, default) config.av.downmix_ac3 = ConfigSelection(choices=choices, default=default) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanAC3Transcode"]: def setAC3plusTranscode(configElement): open("/proc/stb/audio/ac3plus", "w").write(configElement.value) choices = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))] default = "force_ac3" if SystemInfo["CanProc"]: f = "/proc/stb/audio/ac3plus_choices" (choices, default) = readChoices(f, choices, default) config.av.transcodeac3plus = ConfigSelection(choices=choices, default=default) config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/dts_choices" (choices, default) = readChoices(f, choices, default) config.av.downmix_dts = ConfigSelection(choices=choices, default=default) config.av.downmix_dts.addNotifier(setDTSDownmix) if SystemInfo["CanDTSHD"]: def setDTSHD(configElement): open("/proc/stb/audio/dtshd", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/dtshd_choices" (choices, default) = readChoices(f, choices, default) config.av.dtshd = ConfigSelection(choices=choices, default=default) config.av.dtshd.addNotifier(setDTSHD) if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aac_choices" (choices, default) = readChoices(f, choices, default) config.av.downmix_aac = ConfigSelection(choices=choices, default=default) config.av.downmix_aac.addNotifier(setAACDownmix) if SystemInfo["CanDownmixAACPlus"]: def setAACDownmixPlus(configElement): open("/proc/stb/audio/aacplus", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aacplus_choices" (choices, default) = readChoices(f, choices, default) config.av.downmix_aacplus = ConfigSelection(choices=choices, default=default) config.av.downmix_aacplus.addNotifier(setAACDownmixPlus) if SystemInfo["CanAACTranscode"]: def setAACTranscode(configElement): open("/proc/stb/audio/aac_transcode", "w").write(configElement.value) choices = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] default = "off" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aac_transcode_choices" (choices, default) = readChoices(f, choices, default) config.av.transcodeaac = ConfigSelection(choices=choices, default=default) config.av.transcodeaac.addNotifier(setAACTranscode) if SystemInfo["CanWMAPRO"]: def setWMAPRO(configElement): open("/proc/stb/audio/wmapro", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/wmapro_choices" (choices, default) = readChoices(f, choices, default) config.av.wmapro = ConfigSelection(choices=choices, default=default) config.av.wmapro.addNotifier(setWMAPRO) if SystemInfo["CanBTAudio"]: def setBTAudio(configElement): open("/proc/stb/audio/btaudio", "w").write(configElement.value) choices = [("off", _("Off")), ("on", _("On"))] default = "off" if SystemInfo["CanProc"]: f = "/proc/stb/audio/btaudio_choices" (choices, default) = readChoices(f, choices, default) config.av.btaudio = ConfigSelection(choices=choices, default="off") config.av.btaudio.addNotifier(setBTAudio) if SystemInfo["CanBTAudioDelay"]: def setBTAudioDelay(configElement): try: with open(SystemInfo["CanBTAudioDelay"], "w") as fd: fd.write(format(configElement.value * 90, "x")) except: SystemInfo["CanBTAudioDelay"] = False config.av.btaudiodelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.btaudiodelay.addNotifier(setBTAudioDelay) try: SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False except: SystemInfo["CanChangeOsdAlpha"] = False if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if SystemInfo["HasScaler_sharpness"]: def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) if SystemInfo["HasAutoVolume"]: def setAutoVolume(configElement): open(SystemInfo["HasAutoVolume"], "w").write(configElement.value) choices = [("none", _("off")), ("hdmi", "HDMI"), ("spdif", "SPDIF"), ("dac", "DAC")] default = "none" if SystemInfo["CanProc"]: f = "/proc/stb/audio/avl_choices" (choices, default) = readChoices(f, choices, default) config.av.autovolume = ConfigSelection(choices=choices, default=default) config.av.autovolume.addNotifier(setAutoVolume) if SystemInfo["HasAutoVolumeLevel"]: def setAutoVolumeLevel(configElement): open(SystemInfo["HasAutoVolumeLevel"], "w").write(configElement.value and "enabled" or "disabled") config.av.autovolumelevel = ConfigYesNo(default=False) config.av.autovolumelevel.addNotifier(setAutoVolumeLevel) if SystemInfo["Has3DSurround"]: def set3DSurround(configElement): open(SystemInfo["Has3DSurround"], "w").write(configElement.value) choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] default = "none" if SystemInfo["CanProc"]: f = "/proc/stb/audio/3d_surround_choices" (choices, default) = readChoices(f, choices, default) config.av.surround_3d = ConfigSelection(choices=choices, default=default) config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["Has3DSpeaker"]: def set3DSpeaker(configElement): open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value) config.av.speaker_3d = ConfigSelection(default="center", choices=[("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.speaker_3d.addNotifier(set3DSpeaker) if SystemInfo["Has3DSurroundSpeaker"]: def set3DSurroundSpeaker(configElement): open(SystemInfo["Has3DSurroundSpeaker"], "w").write(configElement.value) config.av.surround_3d_speaker = ConfigSelection( default="center", choices=[("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) if SystemInfo["Has3DSurroundSoftLimiter"]: def set3DSurroundSoftLimiter(configElement): open(SystemInfo["Has3DSurroundSoftLimiter"], "w").write(configElement.value and "enabled" or "disabled") config.av.surround_softlimiter_3d = ConfigYesNo(default=False) config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter) if SystemInfo["HDMIAudioSource"]: def setHDMIAudioSource(configElement): open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value) config.av.hdmi_audio_source = ConfigSelection(default="pcm", choices=[("pcm", "PCM"), ("spdif", "SPDIF")]) config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource) def setVolumeStepsize(configElement): eDVBVolumecontrol.getInstance().setVolumeSteps(int( configElement.value)) config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5) config.av.volume_stepsize.addNotifier(setVolumeStepsize) if SystemInfo["HasBypassEdidChecking"]: def setHasBypassEdidChecking(configElement): open(SystemInfo["HasBypassEdidChecking"], "w").write("00000001" if configElement.value else "00000000") config.av.bypassEdidChecking = ConfigYesNo(default=False) config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking) if SystemInfo["HasColorspace"]: def setHaveColorspace(configElement): open(SystemInfo["HasColorspace"], "w").write(configElement.value) if SystemInfo["HasColorspaceSimple"]: choices = [("Edid(Auto)", "auto"), ("Hdmi_Rgb", "RGB"), ("444", "YCbCr 4:4:4"), ("422", "YCbCr 4:2:2"), ("420", "YCbCr 4:2:0")] default = "Edid(Auto)" else: choices = [("auto", "auto"), ("rgb", "RGB"), ("420", "4:2:0"), ("422", "4:2:2"), ("444", "4:4:4")] default = "auto" if os.path.exists("/proc/stb/video/hdmi_colorspace_choices" ) and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colorspace_choices" (choices, default) = readChoices(f, choices, default) config.av.hdmicolorspace = ConfigSelection(choices=choices, default=default) config.av.hdmicolorspace.addNotifier(setHaveColorspace) if SystemInfo["HasColordepth"]: def setHaveColordepth(configElement): open(SystemInfo["HasColordepth"], "w").write(configElement.value) choices = [("auto", "auto"), ("8bit", "8bit"), ("10bit", "10bit"), ("12bit", "12bit")] default = "auto" if os.path.exists("/proc/stb/video/hdmi_colordepth_choices" ) and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colordepth_choices" (choices, default) = readChoices(f, choices, default) config.av.hdmicolordepth = ConfigSelection(choices=choices, default=default) config.av.hdmicolordepth.addNotifier(setHaveColordepth) if SystemInfo["HasHDMIpreemphasis"]: def setHDMIpreemphasis(configElement): open(SystemInfo["HasHDMIpreemphasis"], "w").write("on" if configElement.value else "off") config.av.hdmipreemphasis = ConfigYesNo(default=False) config.av.hdmipreemphasis.addNotifier(setHDMIpreemphasis) if SystemInfo["HasColorimetry"]: def setColorimetry(configElement): open(SystemInfo["HasColorimetry"], "w").write(configElement.value) choices = [("auto", "auto"), ("bt2020ncl", "BT 2020 NCL"), ("bt2020cl", "BT 2020 CL"), ("bt709", "BT 709")] default = "auto" if os.path.exists("/proc/stb/video/hdmi_colorimetry_choices" ) and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colorimetry_choices" (choices, default) = readChoices(f, choices, default) config.av.hdmicolorimetry = ConfigSelection(choices=choices, default=default) config.av.hdmicolorimetry.addNotifier(setColorimetry) if SystemInfo["HasHdrType"]: def setHdmiHdrType(configElement): open(SystemInfo["HasHdrType"], "w").write(configElement.value) config.av.hdmihdrtype = ConfigSelection(default="auto", choices={ "auto": _("auto"), "none": "SDR", "hdr10": "HDR10", "hlg": "HLG", "dolby": "Dolby Vision" }) config.av.hdmihdrtype.addNotifier(setHdmiHdrType) if SystemInfo["HDRSupport"]: def setHlgSupport(configElement): open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value) config.av.hlg_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hlg_support.addNotifier(setHlgSupport) def setHdr10Support(configElement): open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value) config.av.hdr10_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hdr10_support.addNotifier(setHdr10Support) def setDisable12Bit(configElement): open("/proc/stb/video/disable_12bit", "w").write("1" if configElement.value else "0") config.av.allow_12bit = ConfigYesNo(default=False) config.av.allow_12bit.addNotifier(setDisable12Bit) def setDisable10Bit(configElement): open("/proc/stb/video/disable_10bit", "w").write("1" if configElement.value else "0") config.av.allow_10bit = ConfigYesNo(default=False) config.av.allow_10bit.addNotifier(setDisable10Bit)