def createGlobalControlMeshCoefs(parameterCoordinates, quad_list, AVertexList, B1VertexList, B2VertexList, CVertexList,
quad_control_point_indices):
"""
Takes, for N datapoints, an array parameterCoordinates[Nx3](for every
datapoint: first entry the quad index, second and third parameterson a patch that spans over [0,1]x[0,1]
for the quad. The function computes the coefficient matrix for between
each datapoint and the array of M/16 quads x [4x4] vertex control points,
outputting the coefficients as an N x M matrix.
"""
N = parameterCoordinates.shape[0]
M = quad_control_point_indices.shape[0] * quad_control_point_indices.shape[1]
coefsMatrix = np.zeros((N,M))
"""
Precalculate the coefficients between all the vertex control points and
the bezier control points for 7 different number of intersecting
edges as a start
(number of incoming edges(between 3 an 7 hardcoded), [A,B1,B2,C], [in which quad 1-7], bezier point
first coord, bezier point second coord)
"""
ACoefsRaw = np.zeros((7,7,4,4))
B1CoefsRaw = np.zeros((7,7,4,4))
B2CoefsRaw = np.zeros((7,7,4,4))
CCoefsRaw = np.zeros((7,7,4,4))
for num_quads in range(3,8):
[ACoefsRaw[num_quads-1, 0:num_quads, :, :],
B1CoefsRaw[num_quads-1, 0:num_quads, :, :],
B2CoefsRaw[num_quads-1, 0:num_quads, :, :],
CCoefsRaw[num_quads-1, 0:num_quads, :, :]] = createBicubicCoefMatrices(num_quads) # compared to matlab by Saumi & Benni -> VALID
coefsRawTemp = np.zeros((4,7,4,4))
print "Main Loop Coeffs"
for p in range(N):
if p%100 == 0:
print "processing point %d of %d..." % (p, N)
#check if on a corner patch : if both coords are outside [0.25,0.75]
quadParameters = parameterCoordinates[p, 1:3]
quad_index = int(parameterCoordinates[p, 0])
[localCoords, whichCorner, whichPatch] = createLocalParamsExtraordinary(global_quad_params=quadParameters)
#print "p=%d"%p # todo for p=1 get3x3... fails! -> Resolved(?).
#print "whichPatch="+str(whichPatch)
# if there is a specified corner set
if whichCorner != -1:
cornerVertexIndex = quad_list[quad_index, whichCorner]
numberOfEdges = get_num_edges_meeting(AVertexList, cornerVertexIndex)
#TODO: Check output PROBLEM!
indexMask = getExtraOrdCornerIndexMask(quad_list, AVertexList, B1VertexList, B2VertexList, CVertexList,
quad_control_point_indices, quad_index, whichCorner)
coefsRawTemp[0, 0:numberOfEdges, :, :] = ACoefsRaw[numberOfEdges-1, 0:numberOfEdges, :, :]
coefsRawTemp[1, 0:numberOfEdges, :, :] = B1CoefsRaw[numberOfEdges-1, 0:numberOfEdges, :, :]
coefsRawTemp[2, 0:numberOfEdges, :, :] = B2CoefsRaw[numberOfEdges-1, 0:numberOfEdges, :, :]
coefsRawTemp[3, 0:numberOfEdges, :, :] = CCoefsRaw[numberOfEdges-1, 0:numberOfEdges, :, :]
patchCoefsMatrix = getBicubicBezierPointCoefs(localCoords, coefsRawTemp[:, 0:numberOfEdges, :, :])
coefsMatrix[p][indexMask[:]] = patchCoefsMatrix[:]
else:
neighbourMask = get3x3ControlPointIndexMask(quad_list=quad_list,
quad_control_point_indices=quad_control_point_indices,
quad_index=quad_index,
localIndexXY=whichPatch)
neighbourCoefs = getBezierPointCoefs(localCoords)
for j in range(3):
for i in range(3):
coefsMatrix[p, neighbourMask[i, j]] = neighbourCoefs[i, j]
print "Main Loop Coeffs Done."
return coefsMatrix
def createGlobalControlMeshCoefs(parameterCoordinates, quad_list, AVertexList, B1VertexList, B2VertexList, CVertexList,
quad_control_point_indices):
'''
Takes, for N datapoints, an array parameterCoordinates[Nx3](for every
datapoint: first entry the quad index, second and third parameters
on a patch that spans over [0,1]x[0,1]
for the quad. The function computes the coefficient matrix for between
each datapoint and the array of M/16 quads x [4x4] vertex control points,
outputting the coefficients as an N x M scipy.sparse COO-type sparse matrix
@param parameterCoordinates: Nx3 numpy.ndarray of datapoint parameters
@param quad_list:
@param AVertexList:
@param B1VertexList:
@param B2VertexList:
@param CVertexList:
@param quad_control_point_indices: (M/16)x16 numpy.ndarray of control points on each quad
@return: NxM scipy.sparse COO-type sparse matrix of coefficients, maximum 22 nonzero entries per row
'''
N = parameterCoordinates.shape[0]
M = quad_control_point_indices.shape[0] * quad_control_point_indices.shape[1]
max_size = N*28 #4 types of vertices times maximum 7 quads around an extraordinary vertex (large estimate)
rows = np.zeros(max_size, dtype=int)
cols = np.zeros(max_size, dtype=int)
data = np.zeros(max_size)
"""
Precalculate the coefficients between all the vertex control points and
the bezier control points for 7 different number of intersecting
edges as a start
(number of incoming edges(between 3 an 7 hardcoded), [A,B1,B2,C], [in which quad 1-7], bezier point
first coord, bezier point second coord)
"""
ACoefsRaw = np.zeros((7,7,4,4))
B1CoefsRaw = np.zeros((7,7,4,4))
B2CoefsRaw = np.zeros((7,7,4,4))
CCoefsRaw = np.zeros((7,7,4,4))
for num_quads in range(3,8):
[ACoefsRaw[num_quads-1, 0:num_quads, :, :],
B1CoefsRaw[num_quads-1, 0:num_quads, :, :],
B2CoefsRaw[num_quads-1, 0:num_quads, :, :],
CCoefsRaw[num_quads-1, 0:num_quads, :, :]] = createBicubicCoefMatrices(num_quads) # compared to matlab by Saumi & Benni -> VALID
coefsRawTemp = np.zeros((4,7,4,4))
indexCounter = 0
print "Main Loop Coefs"
for p in range(N):
if p%100 == 0:
print "processing point %d of %d..." % (p, N)
#check if on a corner patch : if both coords are outside [0.25,0.75]
quadParameters = parameterCoordinates[p, 1:3]
quad_index = int(parameterCoordinates[p, 0])
[localCoords, whichCorner, whichPatch] = createLocalParamsExtraordinary(global_quad_params=quadParameters)
#print "p=%d"%p # todo for p=1 get3x3... fails! -> Resolved(?).
#print "whichPatch="+str(whichPatch)
# if there is a specified corner set
if whichCorner != -1:
cornerVertexIndex = quad_list[quad_index, whichCorner]
numberOfEdges = get_num_edges_meeting(AVertexList, cornerVertexIndex)
#TODO: Check output PROBLEM!
indexMask = getExtraOrdCornerIndexMask(quad_list, AVertexList, B1VertexList, B2VertexList, CVertexList,
quad_control_point_indices, quad_index, whichCorner)
coefsRawTemp[0, 0:numberOfEdges, :, :] = ACoefsRaw[numberOfEdges-1, 0:numberOfEdges, :, :]
coefsRawTemp[1, 0:numberOfEdges, :, :] = B1CoefsRaw[numberOfEdges-1, 0:numberOfEdges, :, :]
coefsRawTemp[2, 0:numberOfEdges, :, :] = B2CoefsRaw[numberOfEdges-1, 0:numberOfEdges, :, :]
coefsRawTemp[3, 0:numberOfEdges, :, :] = CCoefsRaw[numberOfEdges-1, 0:numberOfEdges, :, :]
patchCoefsMatrix = getBicubicBezierPointCoefs(localCoords, coefsRawTemp[:, 0:numberOfEdges, :, :])
numberOfEntries = numberOfEdges*4
rows[indexCounter:(indexCounter + numberOfEntries)] = p
cols[indexCounter:(indexCounter + numberOfEntries)] = indexMask.flatten()[:]
data[indexCounter:(indexCounter + numberOfEntries)] = patchCoefsMatrix.flatten()[:]
indexCounter += numberOfEntries
else:
neighbourMask = get3x3ControlPointIndexMask(quad_list=quad_list,
quad_control_point_indices=quad_control_point_indices,
quad_index=quad_index,
localIndexXY=whichPatch)
neighbourCoefs = getBezierPointCoefs(localCoords)
numberOfEntries = 9
rows[indexCounter:(indexCounter + numberOfEntries)] = p
cols[indexCounter:(indexCounter + numberOfEntries)] = neighbourMask.flatten()[:]
data[indexCounter:(indexCounter + numberOfEntries)] = neighbourCoefs.flatten()[:]
indexCounter += numberOfEntries
print "Main Loop Coeffs Done."
return ssp.coo_matrix((data, (rows, cols)), shape=(N, M))
def createGlobalControlMeshCoefs(parameterCoordinates, quad_list, AVertexList,
B1VertexList, B2VertexList, CVertexList,
quad_control_point_indices):
'''
Takes, for N datapoints, an array parameterCoordinates[Nx3](for every
datapoint: first entry the quad index, second and third parameters
on a patch that spans over [0,1]x[0,1]
for the quad. The function computes the coefficient matrix for between
each datapoint and the array of M/16 quads x [4x4] vertex control points,
outputting the coefficients as an N x M scipy.sparse COO-type sparse matrix
@param parameterCoordinates: Nx3 numpy.ndarray of datapoint parameters
@param quad_list:
@param AVertexList:
@param B1VertexList:
@param B2VertexList:
@param CVertexList:
@param quad_control_point_indices: (M/16)x16 numpy.ndarray of control points on each quad
@return: NxM scipy.sparse COO-type sparse matrix of coefficients, maximum 22 nonzero entries per row
'''
N = parameterCoordinates.shape[0]
M = quad_control_point_indices.shape[0] * quad_control_point_indices.shape[
1]
max_size = N * 28 #4 types of vertices times maximum 7 quads around an extraordinary vertex (large estimate)
rows = np.zeros(max_size, dtype=int)
cols = np.zeros(max_size, dtype=int)
data = np.zeros(max_size)
"""
Precalculate the coefficients between all the vertex control points and
the bezier control points for 7 different number of intersecting
edges as a start
(number of incoming edges(between 3 an 7 hardcoded), [A,B1,B2,C], [in which quad 1-7], bezier point
first coord, bezier point second coord)
"""
ACoefsRaw = np.zeros((7, 7, 4, 4))
B1CoefsRaw = np.zeros((7, 7, 4, 4))
B2CoefsRaw = np.zeros((7, 7, 4, 4))
CCoefsRaw = np.zeros((7, 7, 4, 4))
for num_quads in range(3, 8):
[
ACoefsRaw[num_quads - 1, 0:num_quads, :, :],
B1CoefsRaw[num_quads - 1, 0:num_quads, :, :],
B2CoefsRaw[num_quads - 1,
0:num_quads, :, :], CCoefsRaw[num_quads - 1,
0:num_quads, :, :]
] = createBicubicCoefMatrices(
num_quads) # compared to matlab by Saumi & Benni -> VALID
coefsRawTemp = np.zeros((4, 7, 4, 4))
indexCounter = 0
print "Main Loop Coefs"
for p in range(N):
if p % 100 == 0:
print "processing point %d of %d..." % (p, N)
#check if on a corner patch : if both coords are outside [0.25,0.75]
quadParameters = parameterCoordinates[p, 1:3]
quad_index = int(parameterCoordinates[p, 0])
[localCoords, whichCorner, whichPatch
] = createLocalParamsExtraordinary(global_quad_params=quadParameters)
#print "p=%d"%p # todo for p=1 get3x3... fails! -> Resolved(?).
#print "whichPatch="+str(whichPatch)
# if there is a specified corner set
if whichCorner != -1:
cornerVertexIndex = quad_list[quad_index, whichCorner]
numberOfEdges = get_num_edges_meeting(AVertexList,
cornerVertexIndex)
#TODO: Check output PROBLEM!
indexMask = getExtraOrdCornerIndexMask(quad_list, AVertexList,
B1VertexList, B2VertexList,
CVertexList,
quad_control_point_indices,
quad_index, whichCorner)
coefsRawTemp[0, 0:numberOfEdges, :, :] = ACoefsRaw[
numberOfEdges - 1, 0:numberOfEdges, :, :]
coefsRawTemp[1, 0:numberOfEdges, :, :] = B1CoefsRaw[
numberOfEdges - 1, 0:numberOfEdges, :, :]
coefsRawTemp[2, 0:numberOfEdges, :, :] = B2CoefsRaw[
numberOfEdges - 1, 0:numberOfEdges, :, :]
coefsRawTemp[3, 0:numberOfEdges, :, :] = CCoefsRaw[
numberOfEdges - 1, 0:numberOfEdges, :, :]
patchCoefsMatrix = getBicubicBezierPointCoefs(
localCoords, coefsRawTemp[:, 0:numberOfEdges, :, :])
numberOfEntries = numberOfEdges * 4
rows[indexCounter:(indexCounter + numberOfEntries)] = p
cols[indexCounter:(indexCounter +
numberOfEntries)] = indexMask.flatten()[:]
data[indexCounter:(
indexCounter +
numberOfEntries)] = patchCoefsMatrix.flatten()[:]
indexCounter += numberOfEntries
else:
neighbourMask = get3x3ControlPointIndexMask(
quad_list=quad_list,
quad_control_point_indices=quad_control_point_indices,
quad_index=quad_index,
localIndexXY=whichPatch)
neighbourCoefs = getBezierPointCoefs(localCoords)
numberOfEntries = 9
rows[indexCounter:(indexCounter + numberOfEntries)] = p
cols[indexCounter:(indexCounter +
numberOfEntries)] = neighbourMask.flatten()[:]
data[indexCounter:(indexCounter +
numberOfEntries)] = neighbourCoefs.flatten()[:]
indexCounter += numberOfEntries
print "Main Loop Coeffs Done."
return ssp.coo_matrix((data, (rows, cols)), shape=(N, M))
