コード例 #1
0
ファイル: fabfile.py プロジェクト: kimata/raspberrypi
def setup_i2c():
    if cuisine.file_exists('/etc/modprobe.d/raspi-blacklist.conf'):
        sudo('sed -i -e \'s/^blacklist i2c-bcm2708/# blacklist i2c-bcm2708/g\' ' +
             '/etc/modprobe.d/raspi-blacklist.conf')
    else:
        # RASPBIAN Release 2015-01-31 or later
        boot_conf = cuisine.text_ensure_line(
            cuisine.file_read('/boot/config.txt'),
            'dtparam=i2c_arm=on'
            )
        cuisine.file_write(
            location = '/boot/config.txt',
            content  = boot_conf,
            mode='755',
            sudo=True
            )
        modules_conf = cuisine.text_ensure_line(
            cuisine.file_read('/etc/modules'),
            'i2c-dev'
            )
        cuisine.file_write(
            location = '/etc/modules',
            content  = modules_conf,
            mode='644',
            sudo=True
            )

    # Repeated Start Condition
    cuisine.file_write(
        location = '/etc/modprobe.d/i2c.conf',
        content  = 'options i2c_bcm2708 combined=1\n',
        mode='644',
        sudo=True
        )
コード例 #2
0
ファイル: fabfile.py プロジェクト: clusterfoundry/cluster7
def get_devpanel_config():
	print env.host
	with hide('output','running','warnings'):
		with show(): print green('[%s] Retrieving db-daemons.conf' % env.host, bold=True)
		for line in iter(cuisine.file_read('/opt/webenabled/compat/dbmgr/config/db-daemons.conf').splitlines()):
			if line.startswith('#'): continue
			db_daemons_conf[env.host] = line.split(':')
		with show(): print green('[%s] Retrieving db-shadow.conf' % env.host, bold=True)
		for line in iter(cuisine.file_read('/opt/webenabled/compat/dbmgr/config/db-shadow.conf').splitlines()):
			if line.startswith('#'): continue
			db_shadow_conf[env.host] = line.split(':')

		# Test MySQL access
		# args -N removes colum name and -B for batch (no design)
		test_mysql_access = run('mysql -NB -uroot -p1P@ssw0rd9 -e \'SELECT "OK" FROM DUAL\' ; true').endswith('OK')
コード例 #3
0
ファイル: fabfile.py プロジェクト: lrks/setting
def ssh_pam_config():
	puts(green('Setup PAM for SSHD'))

	# setting PAM
	pam_ssh = '/etc/pam.d/sshd'
	if not 'pam_access.so' in cuisine.file_read(pam_ssh):
		cuisine.file_append(pam_ssh, 'account required pam_access.so')

	# check SSHD config
	if not 'UsePAM yes' in cuisine.file_read('/etc/ssh/sshd_config'):
		puts(yellow('\'UserPAM no\' in sshd_config '))

	# Upload
	download_and_upload('ssh/%s-access.conf', '/etc/security/access.conf')
	
	puts(green('Success'))
コード例 #4
0
ファイル: recipe_template.py プロジェクト: ezarowny/frycook
    def append_line_to_file(self, tag, add_line, filepath):
        '''
        Append a line to a file on the remote filesystem if it's not
        there already.  Look for the tag to see if the line is there
        already, in case the existing line has different spacing or
        tabbing than the new line.

        :type tag: string
        :param tag: tag to look for in existing lines
        :type add_line: string
        :param add_line: line to append to file
        :type filepath: string
        :param filepath: fully-qualified path to remote file
        '''
        old_contents = cuisine.file_read(filepath)
        eol = cuisine.text_detect_eol(old_contents)
        old_contents = old_contents.rstrip(eol)
        old_contents = old_contents.split(eol)
        has_line = False
        for line in old_contents:
            print line
            if line.find(tag) != -1:
                has_line = True
                continue
        if not has_line:
            old_contents.append(add_line)
            cuisine.file_write(filepath, eol.join(old_contents) + eol)
コード例 #5
0
ファイル: fabfile.py プロジェクト: lrks/setting
def cloudstack_init(fqdn=None):
	puts(green('CloudStack Initialize'))
	
	if fqdn is None:
		abort('Please set FQDN\n\tex) $ fab .... rolename:"fqdn"')
	
	# 石川さんごめんなさい
	sudo('sed -i -e "s/SELINUX=enforcing/SELINUX=permissive/g" /etc/selinux/config')
	sudo('setenforce permissive')
	
	# Repository for CloudStack
	repository = '[cloudstack]\nname=cloudstack\n'
	repository += 'baseurl=http://cloudstack.apt-get.eu/rhel/4.2/\n'
	repository += 'enabled=1\n'
	repository += 'gpgcheck=0\n'
	cuisine.file_write('/etc/yum.repos.d/CloudStack.repo', repository)
	
	# Setting FQDN
	if not fqdn in cuisine.file_read('/etc/hosts'):
		sudo('sed -i -e "s/localhost/' + fqdn + ' localhost/" /etc/hosts')
	
	# NTP
	install_package('ntp')
	cuisine.upstart_ensure('ntpd')
	sudo('chkconfig ntpd on')
	download_and_upload('ntp/%s-ntp.conf', '/etc/ntp.conf', abort_flg=False)

	puts(green('Success'))



#--------------------------------------#
#                  NFS                 #
#--------------------------------------#
	def nfs(directory):
		puts(green('Setup NFS'))

		if fqdn is None:
			abort('Please set Directory\n\tex) $ fab .... nfsrolename:"/etc/hogehoge"')
	
	# Install
	install_package('nfs-utils')

	# Start
	for name in [ 'rpcbind', 'nfs' ]:
		cuisine.upstart_ensure(name)
		sudo('chkconfig %s on' % name)

	# Create Directory
	cuisine.dir_ensure(directory, recursive=True)

	# Setting /etc/exports
	download_and_upload('nfs/%s-exports', '/etc/exports')
	sudo('exportfs -a')

	# Setting /etc/sysconfig/nfs
	download_and_upload('nfs/%s-nfs', '/etc/sysconfig/nfs')
	
	puts(green('Success'))
コード例 #6
0
ファイル: puppet.py プロジェクト: josephmc5/rebar
def config_puppet():
    '''
    Ensure the server directive is in puppet.conf
    '''
    print(green("Writing puppet config file"))
    config_file = '/etc/puppet/puppet.conf'
    line1 = "[agent]"
    line2 = "server = %s" % env.puppet_server
    config_content = file_read(config_file)
    updated_config = text_ensure_line(config_content, line1, line2)
    file_write(config_file, updated_config)
コード例 #7
0
ファイル: fabfile.py プロジェクト: boyska/freepto-buildtools
def file_update(location, updater=lambda x: x, use_sudo=False):
    """
    Updates the content of the given by passing the existing
    content of the remote file at the given location to the 'updater'
    function. Return true if file content was changed.
    """
    assert file_exists(location), "File does not exists: " + location
    old_content = file_read(location)
    new_content = updater(old_content)
    if (old_content == new_content):
        return False
    runner = run_as_root if env.use_sudo or use_sudo else run
    runner('echo "%s" | openssl base64 -A -d -out %s' %
           (base64.b64encode(new_content), shell_safe(location)))
    return True
コード例 #8
0
    def uuid(self, vm=None):
        '''
        Determine the underlying VM's UUID, which is useful for purposes like
        performing low-level control tasks via VBoxManage.
        '''
        if not self._uuid.get(vm):
            runfile = os.path.join(self.directory, '.vagrant')
            with hide('running', 'stdout'):
                if not file_exists(runfile):
                    self.up(vm=vm)

                # newer versions of vagrant use folders instead of a single JSON file
                if os.path.isdir(runfile):
                    idfile = os.path.join(runfile, 'machines', vm or 'default',
                                          'virtualbox', 'id')
                    # when boxes are destroyed the folders persist, so we can't assume the box exists yet
                    if not file_exists(idfile):
                        self.up(vm=vm)
                    self._uuid[vm] = file_read(idfile)
                else:
                    runinfo = json.loads(file_read(runfile))
                    self._uuid[vm] = runinfo['active'].get(vm or 'default')

        return self._uuid.get(vm)
コード例 #9
0
ファイル: fabfile.py プロジェクト: kimata/raspberrypi
def setup_wlan():
    if not cuisine.file_exists('/sys/class/net/wlan0'):
        return

    puts(fabric.colors.green('[Setting Wireless LAN]', True))
    wifi_config = None
    try:
        (file, pathname, description) = imp.find_module('wifi_config', ['.'])
        wifi_config = imp.load_module("wifi_config", file, pathname, description)
    except ImportError:
        puts(fabric.colors.red('SKIP WiFi Configuration. (FAILED to load wifi_config.py)', True))
        return 

    cuisine.file_write(
        location = '/etc/wpa_supplicant/wpa_supplicant.conf',
        content  = 'ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev\n'
                 + 'update_config=1\n'
                 + 'network={\n'
                 + ('    ssid=\"%s\"\n' % (wifi_config.WIFI_SSID))
                 + ('    psk=%s\n' % (wifi_config.WIFI_PSK))
                 + '    key_mgmt=WPA-PSK\n'
                 + '    proto=WPA2\n'
                 + '    pairwise=CCMP\n'
                 + '    group=CCMP\n'
                 + '}\n',
        mode='600',
        sudo=True
        )

    sudo('sed -i -e \'s/^wpa-roam \/etc\/wpa_supplicant\/wpa_supplicant.conf/'
         + 'wpa-conf \/etc\/wpa_supplicant\/wpa_supplicant.conf/\' /etc/network/interfaces') 
    sudo('sed -i -e \'s/^iface wlan0 inet manual/iface wlan0 inet dhcp/\' /etc/network/interfaces')

    # NOTE: Wifi の場合は「ホスト名-wifi」でアクセスできるようにする
    dhclient_conf = cuisine.text_ensure_line(
        cuisine.file_read('/etc/dhcp/dhclient.conf'),
        'interface "wlan0" { send host-name = concat (gethostname(), "-wifi"); }'
        )

    cuisine.file_write(
        location = '/etc/dhcp/dhclient.conf',
        content  = dhclient_conf,
        mode='644',
        sudo=True
        )
コード例 #10
0
ファイル: fabfile.py プロジェクト: lrks/setting
def download_and_upload(local, remote, abort_flg=True):
	host = env.hosts[0]
	origin = local
	if '%s' in origin:
		local = origin % host
	local = './config/' + local

	# Download
	if cuisine.file_exists(remote):
		data = cuisine.file_read(remote)
		tmp = ('-%s.bak.ignore' % host)
		f = open(local + tmp, 'w')
		f.write(data)
		puts(yellow('Download: %s ==> %s' % (remote, local + tmp)))
		f.close()

	# Upload
	def upload(local, remote, post=''):
		def _upload(local, remote):
			if not os.path.isfile(local):
				return False
			cuisine.file_upload(remote, local)
			puts(yellow('Upload: %s ==> %s' % (local, remote)))
			return True
		if _upload(local + post, remote):
			return True

		if '%s' in origin and _upload('./config/' + origin % 'default' + post, remote):
			return True

		return False
	
	if upload(local, remote, '.ignore'):
		# Debug
		return
	if upload(local, remote):
		# Main
		return

	# Abort
	str = 'Not Found %s' % local
	if not abort_flg:
		puts(yellow(str))
	else:
		abort(str)
コード例 #11
0
ファイル: recipe_template.py プロジェクト: ezarowny/frycook
    def find_replace_in_file(self, old_text, new_text, filepath):
        '''
        Find and replace text in a file on the remote filesystem.

        :type old_text: string
        :param tag: text to replace
        :type new_text: string
        :param add_line: text to replace with
        :type filepath: string
        :param filepath: fully-qualified path to remote file
        '''
        old_contents = cuisine.file_read(filepath)
        eol = cuisine.text_detect_eol(old_contents)
        old_contents = old_contents.split(eol)
        new_contents = []
        for line in old_contents:
            print line
            new_line = line.replace(old_text, new_text)
            new_contents.append(new_line)
        cuisine.file_write(filepath, eol.join(new_contents))
コード例 #12
0
ファイル: fabfile.py プロジェクト: lrks/setting
def upgrade_agent():
	puts(green('Upgrade Agent'))

	# Prepare
	upgrade_common()

	# Upgrade
	proxy(sudo, 'yum upgrade cloudstack-agent -y')

	# Verify
	path = '/etc/cloudstack/agent/environment.properties'
	str = 'paths.script=/usr/share/cloudstack-common'
	if not str in cuisine.file_read(path):
		cuisine.file_append(path, '\n%s\n' % str)
	
	# Restart
	cuisine.upstart_stop('cloudstack-agent')
	sudo('killall jsvc', warn_only=True)
	cuisine.upstart_ensure('cloudstack-agent')

	puts(green('Success'))
コード例 #13
0
ファイル: infra.py プロジェクト: iBrostudio/Infrastructure
def sentry():

    cuisine.run('virtualenv /var/opt/sentry/')
    cuisine.run('source /var/opt/sentry/bin/activate')
    cuisine.run('easy_install -UZ sentry')
    cuisine.run('sentry init /etc/sentry.conf.py')
    configuration = cuisine.file_read('/etc/sentry.conf.py')
    dictionnary = {
        "django.db.backends.sqlite3":"django.db.backends.mysql",
        "'NAME': os.path.join(CONF_ROOT, 'sentry.db')":"'NAME': 'sentry'",
        "'USER': '******'":"'USER': '******'",
        "'PASSWORD': ''":"'PASSWORD': '******'"
    }
    for old, new in dictionnary.iteritems():
        configuration = configuration.replace(old, new)
    cuisine.file_write('/etc/sentry.conf.py', configuration)
    if not database_exists('sentry'):
        fabtools.mysql.create_database('sentry')
    cuisine.run('sentry --config=/etc/sentry.conf.py upgrade')
    fabtools.require.supervisor.process('sentry',
    command='sentry --config=/etc/sentry.conf.py start http',
    directory='/var/opt/sentry/',
    autorestart='true'
    )
コード例 #14
0
ファイル: all.py プロジェクト: postmates/cuisine
 def testRead(self):
     cuisine.file_read("/etc/passwd")
コード例 #15
0
ファイル: all.py プロジェクト: cabbiepete/cuisine
	def testB( self ):
		print cuisine.file_read("/etc/passwd")
コード例 #16
0
ファイル: fabfile.py プロジェクト: Youwotma/fabfiles
def get_config(key, default=None):
    filename = "/etc/installconfig/%s.pk" % key
    if cuisine.file_exists(filename):
        return pickle.loads(cuisine.file_read(filename))
    else:
        return default
コード例 #17
0
 def read_vagrantfile(self, vm=None):
     return file_read(os.path.join(self.directory, 'Vagrantfile'))
コード例 #18
0
ファイル: all.py プロジェクト: lost-theory/cuisine
	def testRead( self ):
		cuisine.file_read("/etc/passwd")
コード例 #19
0
ファイル: fabfile.py プロジェクト: lrks/setting
def management():
	puts(green('Setup Management Server'))

	# Install
	install_package('cloudstack-management')
	
	# Load File
	config = ConfigParser.SafeConfigParser()
	config.read(config_read_path('./config/management/db.ini'))
	
	user = config.get('cloud', 'user')
	password = config.get('cloud', 'password')
	deploy_user = config.get('deploy', 'user')
	deploy_password = config.get('deploy', 'password')
	server = config.get('deploy', 'server')
	
	if None in [ user, password, deploy_user, deploy_password, server ]:
		abort('Check config/agent/db.ini')
	
	# Initialize
	run('cloudstack-setup-databases "%s:%s@%s" "--deploy-as=%s:%s"' % (user, password, server, deploy_user, deploy_password))

	tmp = 'Defaults:cloud !requiretty'
	if not '\n' + tmp in cuisine.file_read('/etc/sudoers'):
		cuisine.file_append('/etc/sudoers', '\nDefaults:cloud !requiretty\n')
	
	run('cloudstack-setup-management')
	sudo('chkconfig cloudstack-management on')
	sudo('chown cloud:cloud /var/log/cloudstack/management/catalina.out')

	# NFS Client
	for service in [ 'rpcbind', 'nfs' ]:
		cuisine.upstart_ensure(service)
		sudo('chkconfig %s on' % service)
	
	# Setting Storage
	cuisine.dir_ensure('/mnt/primary', recursive=True)
	cuisine.dir_ensure('/mnt/secondary', recursive=True)
	
	config.read(config_read_path('./config/management/nfs.ini'))
	nfs_primary_path = config.get('primary', 'path')
	nfs_primary_ip = config.get('primary', 'ipaddr')
	nfs_secondary_path = config.get('secondary', 'path')
	nfs_secondary_ip = config.get('secondary', 'ipaddr')
	
	if None in [ nfs_primary_path, nfs_primary_ip, nfs_secondary_path, nfs_secondary_ip ]:
		abort('Check config/agent/nfs.ini')
	
	sudo('mount -t nfs %s:%s /mnt/primary' % (nfs_primary_ip, nfs_primary_path))
	sleep(5)
	sudo('mount -t nfs %s:%s /mnt/secondary' % (nfs_secondary_ip, nfs_secondary_path))
	sleep(5)
	
	sudo('rm -rf /mnt/primary/*')
	sudo('rm -rf /mnt/secondary/*')
	
	proxy(sudo, '/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt -m /mnt/secondary -u http://d21ifhcun6b1t2.cloudfront.net/templates/4.2/systemvmtemplate-2013-06-12-master-kvm.qcow2.bz2 -h kvm -F')
	sudo('sync')
	
	for dir in [ '/mnt/primary', '/mnt/secondary' ]:
		sudo('umount %s' % dir)
		sudo('rmdir %s' % dir)

	puts(green('Success'))