def remove_background(image):
"""
Removes background from image
"""
# Paramters.
BLUR = 21
CANNY_THRESH_1 = 10
CANNY_THRESH_2 = 30
MASK_DILATE_ITER = 10
MASK_ERODE_ITER = 10
MASK_COLOR = (0.0, 0.0, 1.0)
gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)
# Edge detection.
edges = cv2.Canny(gray, CANNY_THRESH_1, CANNY_THRESH_2)
edges = cv2.dilate(edges, None)
edges = cv2.erode(edges, None)
# Find contours in edges, sort by area
contour_info = []
contours, _ = cv2.findContours(edges, cv2.RETR_LIST, cv2.CHAIN_APPROX_NONE)
for c in contours:
contour_info.append((
c,
cv2.isContourConvex(c),
cv2.contourArea(c),
))
contour_info = sorted(contour_info, key=lambda c: c[2], reverse=True)
max_contour = contour_info[0]
# Create empty mask.
mask = np.zeros(edges.shape)
cv2.fillConvexPoly(mask, max_contour[0], (255))
# Smooth mask and blur it.
mask = cv2.dilate(mask, None, iterations=MASK_DILATE_ITER)
mask = cv2.erode(mask, None, iterations=MASK_ERODE_ITER)
mask = cv2.GaussianBlur(mask, (BLUR, BLUR), 0)
mask_stack = np.dstack([mask] * 3)
# Blend masked img into MASK_COLOR background
mask_stack = mask_stack.astype('float32') / 255.0
image = image.astype('float32') / 255.0
masked = (mask_stack * image) + ((1 - mask_stack) * MASK_COLOR)
masked = (masked * 255).astype('uint8')
c_red, c_green, c_blue = cv2.split(image)
img_a = cv2.merge((c_red, c_green, c_blue, mask.astype('float32') / 255.0))
return img_a * 255
def convex(ImgNo, defThr=127):
img = cv2.imread(impDef.select_img(ImgNo))
img1 = img.copy()
imgray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
ret, thr = cv2.threshold(imgray, defThr, 255, 0)
cv2.imshow('thr', thr)
impDef.close_window()
contours, _ = cv2.findContours(thr, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)
cnt = contours[1]
## 코드영역 따기
cntI = 0
for i in contours:
cnt0 = contours[cntI]
area = cv2.contourArea(cnt0)
print('면적 : ', area)
#영역의 크기가 45000 보다 크고 50000보다 작은경우만 출력
if area >= 45000 and area < 50000:
cv2.drawContours(img1, [cnt0], 0, (0, 0, 255), 2)
cv2.imshow('contour', img1)
impDef.close_window()
cntI = cntI + 1
##
cv2.drawContours(img, [cnt], 0, (0, 255, 0), 3)
check = cv2.isContourConvex(cnt)
# cv2.isContourConvex() 함수는 인자로 입력된 Contour가 Convex Hull 인지 체크합니다.
# 만만 Convex Hull이라면 True를 리턴하고 그렇지 않으면 False를 리턴합니다.
if not check:
hull = cv2.convexHull(cnt)
cv2.drawContours(img1, [hull], 0, (0, 255, 0), 3)
cv2.imshow('convexhull', img1)
# check 값이 False인 경우, 다시 말하면 우리가 주목하는 Contour가 Convex Hull이
# 아니라면 cv2.convexHull() 함수를 이용해 원본이미지의 contours[1]에 대한
# convex hull 곡선을 구합니다.
cv2.imshow('contour', img)
impDef.close_window()
def reconstruct(self, img, descirptor_in_use):
"""由傅里叶描述子重建轮廓图
:param res: 输入图像，傅里叶描述子
:return: 重绘图像
"""
contour_reconstruct = np.fft.ifft(descirptor_in_use) # 傅里叶反变换
contour_reconstruct = np.array(
[contour_reconstruct.real, contour_reconstruct.imag])
contour_reconstruct = np.transpose(contour_reconstruct) # 转换矩阵
contour_reconstruct = np.expand_dims(contour_reconstruct,
axis=1) # 改变数组维度在axis=1轴上加1
if contour_reconstruct.min() < 0:
contour_reconstruct -= contour_reconstruct.min()
contour_reconstruct *= img.shape[0] / contour_reconstruct.max()
contour_reconstruct = contour_reconstruct.astype(np.int32, copy=False)
# 中心点
M = cv2.moments(contour_reconstruct) # 计算第一条轮廓的各阶矩,字典形式
center_x = int(M["m10"] / M["m00"])
center_y = int(M["m01"] / M["m00"])
black_np = np.ones(img.shape, np.uint8) # 创建黑色幕布
black = cv2.drawContours(black_np, contour_reconstruct, -1,
(255, 255, 255), 3) # 绘制白色轮廓
black = cv2.circle(black, (center_x, center_y), 4, 255, -1) # 绘制中心点
cv2.circle(img, (center_x, center_y), 5, 255, -1) # 绘制中心点
point = [] # 二维数组转坐标形式
for idx in range(len(contour_reconstruct)):
str1 = str(
contour_reconstruct[idx]).lstrip('[[').rstrip(']]').split(
" ") # [[010 200]]去头尾，按空格分割['','10','200']
while '' in str1:
str1.remove('') # 去空格
point.append((int(str1[0]), int(str1[1])))
if point[idx]:
cv2.circle(black,
point[idx],
3, (0, 255, 255),
thickness=-1,
lineType=cv2.FILLED)
cv2.putText(black,
"{}".format(idx),
point[idx],
cv2.FONT_HERSHEY_SIMPLEX,
0.6, (0, 0, 255),
2,
lineType=cv2.LINE_AA)
# print(contour_reconstruct)
print(point)
# 凸包
hull = cv2.convexHull(contour_reconstruct) # 寻找凸包，得到凸包的角点
print("部分凸包信息：")
print(hull[0]) # [[194 299]]（坐标）
hull2 = cv2.convexHull(contour_reconstruct, returnPoints=False)
print(hull2[0]) # [20]（cnt中的索引）
print(contour_reconstruct[31]) # [[146 33]]
print(cv2.isContourConvex(hull)) # True是否为凸型
dist = cv2.pointPolygonTest(contour_reconstruct, (center_x, center_y),
True) # 中心点的最小距离
print(dist)
cv2.polylines(img, [hull], True, (255, 255, 255), 3) # 绘制凸包
plt.figure(figsize=(10, 10))
plt.subplot(1, 2, 1)
plt.imshow(cv2.cvtColor(img, cv2.COLOR_BGR2RGB))
plt.xlabel(u'凸包轮廓图', fontsize=20)
plt.subplot(1, 2, 2)
plt.imshow(cv2.cvtColor(black, cv2.COLOR_BGR2RGB))
plt.xlabel(u'傅里叶描述子和重心', fontsize=20)
plt.show()
#cv2.imshow("contour_reconstruct", img)
# cv2.imwrite('recover.png',img)
return img
def detect_coordinates2(image_address):
cv.namedWindow('Trackbar', cv.WINDOW_NORMAL)
cv.createTrackbar('lh', 'Trackbar', 36, 255, nothing)
cv.createTrackbar('ls', 'Trackbar', 0, 255, nothing)
cv.createTrackbar('lv', 'Trackbar', 0, 255, nothing)
cv.createTrackbar('uh', 'Trackbar', 86, 86, nothing)
cv.createTrackbar('us', 'Trackbar', 255, 255, nothing)
cv.createTrackbar('uv', 'Trackbar', 255, 255, nothing)
cv.createTrackbar('min_rad', 'Trackbar', 5, 50, nothing)
cv.createTrackbar('max_rad', 'Trackbar', 10, 50, nothing)
#cv.createTrackbar('lh_s', 'Trackbar', 0, 255, nothing)
#cv.createTrackbar('ls_s', 'Trackbar', 0, 255, nothing)
#cv.createTrackbar('lv_s', 'Trackbar', 0, 255, nothing)
#cv.createTrackbar('uh_s', 'Trackbar', 0, 255, nothing)
#cv.createTrackbar('us_s', 'Trackbar', 0, 255, nothing)
#cv.createTrackbar('uv_s', 'Trackbar', 0, 255, nothing)
circle_coordinates = []
cue_ball_coordinate = []
cue_stick_coordinate = []
while (True):
circle_coordinates.clear()
cue_ball_coordinate.clear()
frame = cv.imread(image_address, 1)
frame_copy = frame.copy()
frame_copy = cv.medianBlur(frame_copy, 3)
hsv = cv.cvtColor(frame_copy, cv.COLOR_BGR2HSV)
hsv_cue = hsv.copy()
lh = cv.getTrackbarPos('lh', 'Trackbar')
ls = cv.getTrackbarPos('ls', 'Trackbar')
lv = cv.getTrackbarPos('lv', 'Trackbar')
uh = cv.getTrackbarPos('uh', 'Trackbar')
us = cv.getTrackbarPos('us', 'Trackbar')
uv = cv.getTrackbarPos('uv', 'Trackbar')
#lh_s = cv.getTrackbarPos('lh_s', 'Trackbar')
#ls_s = cv.getTrackbarPos('ls_s', 'Trackbar')
#lv_s = cv.getTrackbarPos('lv_s', 'Trackbar')
#uh_s = cv.getTrackbarPos('uh_s', 'Trackbar')
#us_s = cv.getTrackbarPos('us_s', 'Trackbar')
#uv_s = cv.getTrackbarPos('uv_s', 'Trackbar')
min_rad = cv.getTrackbarPos('min_rad', 'Trackbar')
max_rad = cv.getTrackbarPos('max_rad', 'Trackbar')
lower_green = np.array([lh, ls, lv])
upper_green = np.array([uh, us, uv])
lower_white = np.array([0, 0, 168])
upper_white = np.array([172, 111, 255])
lower_pink = np.array([125, 100, 186])
upper_pink = np.array([166, 123, 219])
mask_white = cv.inRange(hsv_cue, lower_white, upper_white)
mask = cv.inRange(hsv, lower_green, upper_green)
mask = cv.bitwise_not(mask, mask=None)
mask_stick = cv.inRange(hsv, lower_pink, upper_pink)
contours, _ = cv.findContours(mask, cv.RETR_TREE, cv.CHAIN_APPROX_NONE)
contours_white_ball, _ = cv.findContours(mask_white, cv.RETR_TREE,
cv.CHAIN_APPROX_NONE)
contours_stick, _ = cv.findContours(mask_stick, cv.RETR_TREE,
cv.CHAIN_APPROX_NONE)
for contour in contours_stick:
#approx_stick = cv.approxPolyDP(
#contour,0.01*cv.arcLength(contour,True),True)
M_stick = cv.moments(contour)
if M_stick['m00'] == 0:
continue
cX_stick = M_stick['m10'] / M_stick['m00']
cY_stick = M_stick['m01'] / M_stick['m00']
cv.circle(frame, (int(cX_stick), int(cY_stick)), 1, (123, 55, 55),
2)
cue_stick_coordinate = [cX_stick, cY_stick]
for contour in contours_white_ball:
approx_white = cv.approxPolyDP(contour,
0.01 * cv.arcLength(contour, True),
True)
x_white = approx_white.ravel()[0]
y_white = approx_white.ravel()[1]
M = cv.moments(contour)
if M['m00'] == 0:
continue
cX_white = M['m10'] / M['m00']
cY_white = M['m01'] / M['m00']
#if len(approx_white) == 4:
# _, _, w, h = cv.boundingRect(approx_white)
# aspectRatio = float(w)/h
# if aspectRatio >= 0.95 and aspectRatio <= 1.05:
# cv.circle(frame, (int(cX_white), int(cY_white)), 1, (255, 0, 255), 2)
if len(approx_white) > 10:
k = cv.isContourConvex(approx_white)
if k == 0:
continue
radius_white = math.sqrt((cX_white - x_white)**2 +
(cY_white - y_white)**2)
if radius_white < min_rad or radius_white > max_rad:
continue
cv.circle(frame, (int(cX_white), int(cY_white)),
int(radius_white) * 2, (100, 100, 100), 2)
cv.circle(frame, (int(cX_white), int(cY_white)), 1,
(255, 100, 100), 2)
cue_ball_coordinate = [cX_white, cY_white, radius_white]
for contour in contours:
if len(cue_ball_coordinate) != 0:
cX_white = cue_ball_coordinate[0]
cY_white = cue_ball_coordinate[1]
approx = cv.approxPolyDP(contour,
0.01 * cv.arcLength(contour, True), True)
x = approx.ravel()[0]
y = approx.ravel()[1]
M = cv.moments(contour)
if M['m00'] == 0:
continue
cX = M['m10'] / M['m00']
cY = M['m01'] / M['m00']
if len(approx) > 10:
if len(cue_ball_coordinate) != 0:
distance = math.sqrt((cX - cX_white)**2 +
(cY - cY_white)**2)
if distance < min_rad:
continue
radius = math.sqrt((cX - x)**2 + (cY - y)**2)
if radius < min_rad or radius > max_rad:
continue
cv.circle(frame, (int(cX), int(cY)), 1, (0, 255, 0), 2)
cv.circle(frame, (int(cX), int(cY)), 2 * int(radius),
(0, 255, 255), 2)
circle_coordinates.append([cX, cY, radius])
cv.imshow('Image', frame)
cv.imshow('Imag2', mask)
if cv.waitKey(1) & 0xFF == 27:
break
cv.destroyAllWindows()
return circle_coordinates, cue_ball_coordinate, cue_stick_coordinate
# Contour Approximation approximates a contour shape to another shape with less number of vertices depending upon the precision we specify.
epsilon = 0.05 * cv2.arcLength(cnt, True)
# The second argument is called epsilon, which is maximum distance from contour to approximated contour. It is an accuracy parameter.
approx = cv2.approxPolyDP(cnt, epsilon, True)
approx2 = cv2.approxPolyDP(cnt, 0.1 * epsilon, True)
# Convex Hull will look similar to contour approximation, but it is not (Both may provide same results in some cases). Here, cv2.convexHull() function checks a curve for convexity defects and corrects it. Generally speaking, convex curves are the curves which are always bulged out, or at-least flat. And if it is bulged inside, it is called convexity defects.
# points are the contours we pass into.
# hull is the output, normally we avoid it.
# clockwise : Orientation flag. If it is True, the output convex hull is oriented clockwise. Otherwise, it is oriented counter-clockwise.
# returnPoints : By default, True. Then it returns the coordinates of the hull points. If False, it returns the indices of contour points corresponding to the hull points.
hull = cv2.convexHull(cnt)
# Check if a curve is convex or not.
k = cv2.isContourConvex(cnt)
print(k)
draw_approx = cv2.drawContours(img_rgb, [approx], 0, (0, 255, 0), 5)
draw_approx2 = cv2.drawContours(img_rgb2, [approx2], 0, (100, 190, 255), 5)
draw_approx3 = cv2.drawContours(img_rgb3, [hull], 0, (0, 255, 255), 5)
# image must be rgb or you'll get black contours which cannot be easily recognized.
plt.subplot(2, 2, 1), plt.imshow(img, cmap='gray')
plt.title('Original'), plt.xticks([]), plt.yticks([])
plt.subplot(2, 2, 2), plt.imshow(draw_approx, cmap='gray')
plt.title('epsilon = 5% of the arc length'), plt.xticks([]), plt.yticks([])
plt.subplot(2, 2, 3), plt.imshow(draw_approx2, cmap='gray')
plt.title('epsilon = 0.5% of the arc length'), plt.xticks([]), plt.yticks([])
sys.exit()
img = cv.resize(img, (0, 0), fx=0.3, fy=0.3)
img_gray = cv.cvtColor(img, cv.COLOR_BGR2GRAY)
_, img_binary = cv.threshold(img_gray, 0, 255,
cv.THRESH_BINARY | cv.THRESH_OTSU)
contours, _ = cv.findContours(img_binary, cv.RETR_EXTERNAL,
cv.CHAIN_APPROX_NONE)
dw, dh = 900, 500
import pytesseract
for pts in contours:
if cv.contourArea(pts) > 5000:
approx = cv.approxPolyDP(pts, cv.arcLength(pts, True) * 0.02, True)
if len(approx) == 4 and cv.isContourConvex(approx):
cv.polylines(img, pts, True, (0, 0, 255))
srcQuad = reorderPts(approx.reshape(4, 2))
dstQuad = np.array([[0, dh], [dw, dh], [dw, 0], [0, 0]],
dtype=np.float32)
pers = cv.getPerspectiveTransform(srcQuad, dstQuad)
img_dst = cv.warpPerspective(img,
pers, (dw, dh),
flags=cv.INTER_CUBIC)
dst_rgb = cv.cvtColor(img_dst, cv.COLOR_BGR2RGB)
print(
pytesseract.image_to_string(
dst_rgb, lang='Hangul+Hangul_vert+eng+eng_vert'))
# hull = cv2.convexHull(points[, hull[, clockwise[, returnPoints]]
# Arguments details:
# points are the contours we pass into.
# hull is the output, normally we avoid it.
# clockwise : Orientation flag. If it is True, the output convex hull is oriented clockwise. Otherwise, it is oriented counter-clockwise.
# returnPoints : By default, True. Then it returns the coordinates of the hull points. If False, it returns the indices of contour points corresponding to the hull points.
# So to get a convex hull as in above image, following is sufficient:
hull = cv2.convexHull(cnt)
hullcon = cv2.drawContours(img.copy(), [hull], -1, (0,0,255), 3)
cv2.imshow('hull', hullcon)
# Checking Convexity
# There is a function to check if a curve is convex or not, cv2.isContourConvex(). It just return whether True or False. Not a big deal.
print cv2.isContourConvex(cnt)
# Bounding Rectangle
# There are two types of bounding rectangles.
# a. Straight Bounding Rectangle
# It is a straight rectangle, it doesn’t consider the rotation of the object. So area of the bounding rectangle won’t be minimum. It is found by the function cv2.boundingRect().
# Let (x,y) be the top-left coordinate of the rectangle and (w,h) be its width and height.
x,y,w,h = cv2.boundingRect(cnt)
print cv2.boundingRect(cnt)
straightRect = cv2.rectangle(img.copy(),(x,y),(x+w,y+h),(0,255,0),2)
cv2.imshow('straightRect', straightRect)
