def __init__(
self,
singleton=True # 单例模式
,
nickname=None # Worker的自定义名字
,
description="No Description" # 备注说明
,
log_level="INFO" # "DEBUG","INFO","WARNING"
,
heart_beat_interval=3 # 默认3秒心跳
,
**kwargs):
self.__token__ = util.generate_token()
if nickname is None:
self.__nickname__ = self.__class__.__name__ + "Default"
else:
self.__nickname__ = nickname
self.nickname = self.__nickname__
self.name = self.__nickname__
self.__singleton__ = singleton
self.__description__ = description
self.__heart_beat_interval__ = heart_beat_interval
self.__threads__ = dict() # 被监控的线程
self.__data_feeder__ = set() # 本Worker订阅的内容
self.__follower__ = set() # Follower
self.__error_msg__ = None #
self.__stop_info__ = None #
self.__stop_time__ = None #
self.__status__ = "init" # "init", "error_exit", "suspended", "user_stopped", "normal"
self.redis_key = "dHydra.Worker." + self.__class__.__name__ + "." + self.__nickname__ + "."
self.channel_pub = self.redis_key + "Pub"
"""
self.__threads__ = {
"nickname": {
"description" : "该线程功能备注说明",
"name" : "该线程的名字",
"target" : "该线程的target"
"restart_mode" : "重启模式，可以为 manual/auto/remove;manual则代表允许管理员发送命令手工重启线程,auto则一旦线程关闭立即自动开启，remove则代表一旦线程结束就从监控列表移除",
"restart_func" : "自动/手动重启时调用的方法",
},
}
"""
self.logger = self.get_logger(level=log_level)
if self.check_prerequisites() is True:
super().__init__()
self.daemon = True
else:
sys.exit(0)
self.shutdown_signals = [
signal.SIGQUIT, # quit 信号
signal.SIGINT, # 键盘信号
signal.SIGHUP, # nohup 命令
signal.SIGTERM, # kill 命令
]
for s in self.shutdown_signals:
# 捕获退出信号后的要调用的,唯一的 shutdown 接口
signal.signal(s, self.__on_termination__)
def __init__(
self,
singleton=True, # 单例模式
nickname=None, # Worker的自定义名字
description="No Description", # 备注说明
heart_beat_interval=1, # 默认1秒心跳
log_path="log", #
console_log=True, # 屏幕打印日志开关，默认True
console_log_level=logging.INFO, # 屏幕打印日志的级别，默认为INFO
critical_log=False, # critical单独写文件日志，默认关闭
error_log=True, # error级别单独写文件日志，默认开启
warning_log=False, # warning级别单独写日志，默认关闭
info_log=True, # info级别单独写日志，默认开启
debug_log=False, # debug级别日志，默认关闭
**kwargs
):
super().__init__()
# 记录日志配置
self.__log_path__ = log_path
self.__console_log__ = console_log
self.__console_log_level__ = console_log_level
self.__critical_log__ = critical_log
self.__error_log__ = error_log
self.__warning_log__ = warning_log
self.__info_log__ = info_log
self.__debug_log__ = debug_log
self.logger = util.get_logger(
logger_name=self.__class__.__name__,
log_path=self.__log_path__, #
console_log=self.__console_log__, # 屏幕打印日志开关，默认True
console_log_level=self.__console_log_level__, # 屏幕打印日志的级别，默认为INFO
critical_log=self.__critical_log__, # critica单独l写文件日志，默认关闭
error_log=self.__error_log__, # error级别单独写文件日志，默认开启
warning_log=self.__warning_log__, # warning级别单独写日志，默认关闭
info_log=self.__info_log__, # info级别单独写日志，默认开启
debug_log=self.__debug_log__, # debug级别日志，默认关闭
)
self.__token__ = util.generate_token()
if nickname is None:
self.__nickname__ = self.__class__.__name__
else:
self.__nickname__ = nickname
self.nickname = self.__nickname__
self.name = self.__nickname__
self.__singleton__ = singleton
self.__description__ = description
self.__heart_beat_interval__ = heart_beat_interval
self.__threads__ = dict() # 被监控的线程
self.__data_feeder__ = set() # 本Worker订阅的内容
self.__follower__ = set() # Follower
self.__error_msg__ = None #
self.__stop_info__ = None #
self.__stop_time__ = None #
self.__status__ = "init"
self.redis_key = "dHydra.Worker." + \
self.__class__.__name__ + "." + self.__nickname__ + "."
self.channel_pub = self.redis_key + "Pub"
"""
self.__threads__ = {
"nickname": {
"description" : "该线程功能备注说明",
"name" : "该线程的名字",
"target" : "该线程的target"
"restart_mode" : "重启模式，可以为 manual/auto/remove;
manual则代表允许管理员发送命令手工重启线程,
auto则一旦线程关闭立即自动开启，
remove则代表一旦线程结束就从监控列表移除",
"restart_func" : "自动/手动重启时调用的方法",
},
}
"""
self.shutdown_signals = [
"SIGQUIT", # quit 信号
"SIGINT", # 键盘信号
"SIGHUP", # nohup 命令
"SIGTERM", # kill 命令
]
for s in self.shutdown_signals:
# 捕获退出信号后的要调用的,唯一的 shutdown 接口
try:
if hasattr(signal, s):
signal.signal(
getattr(signal, s, None),
self.__on_termination__
)
except Exception as e:
self.logger.info("绑定退出信号：{}失败，可能与windows系统有关。".format(s))
# 清空它，在run以后重新实例化
# 否则windows下会无法pickle
del(self.logger)
def __init__(
self,
singleton=True, # 单例模式
nickname=None, # Worker的自定义名字
description="No Description", # 备注说明
heart_beat_interval=1, # 默认1秒心跳
log_path="log", #
console_log=True, # 屏幕打印日志开关，默认True
console_log_level=logging.INFO, # 屏幕打印日志的级别，默认为INFO
critical_log=False, # critical单独写文件日志，默认关闭
error_log=True, # error级别单独写文件日志，默认开启
warning_log=False, # warning级别单独写日志，默认关闭
info_log=True, # info级别单独写日志，默认开启
debug_log=False, # debug级别日志，默认关闭
**kwargs):
# 记录日志配置
self.__log_path__ = log_path
self.__console_log__ = console_log
self.__console_log_level__ = console_log_level
self.__critical_log__ = critical_log
self.__error_log__ = error_log
self.__warning_log__ = warning_log
self.__info_log__ = info_log
self.__debug_log__ = debug_log
self.logger = util.get_logger(
logger_name=self.__class__.__name__,
log_path=self.__log_path__, #
console_log=self.__console_log__, # 屏幕打印日志开关，默认True
console_log_level=self.__console_log_level__, # 屏幕打印日志的级别，默认为INFO
critical_log=self.__critical_log__, # critica单独l写文件日志，默认关闭
error_log=self.__error_log__, # error级别单独写文件日志，默认开启
warning_log=self.__warning_log__, # warning级别单独写日志，默认关闭
info_log=self.__info_log__, # info级别单独写日志，默认开启
debug_log=self.__debug_log__, # debug级别日志，默认关闭
)
self.__token__ = util.generate_token()
if nickname is None:
self.__nickname__ = self.__class__.__name__ + "Default"
else:
self.__nickname__ = nickname
self.nickname = self.__nickname__
self.name = self.__nickname__
self.__singleton__ = singleton
self.__description__ = description
self.__heart_beat_interval__ = heart_beat_interval
self.__threads__ = dict() # 被监控的线程
self.__data_feeder__ = set() # 本Worker订阅的内容
self.__follower__ = set() # Follower
self.__error_msg__ = None #
self.__stop_info__ = None #
self.__stop_time__ = None #
self.__status__ = "init"
self.mongo = False
# "init", "error_exit", "suspended", "user_stopped", "normal"
self.redis_key = "dHydra.Worker." + \
self.__class__.__name__ + "." + self.__nickname__ + "."
self.channel_pub = self.redis_key + "Pub"
"""
self.__threads__ = {
"nickname": {
"description" : "该线程功能备注说明",
"name" : "该线程的名字",
"target" : "该线程的target"
"restart_mode" : "重启模式，可以为 manual/auto/remove;
manual则代表允许管理员发送命令手工重启线程,
auto则一旦线程关闭立即自动开启，
remove则代表一旦线程结束就从监控列表移除",
"restart_func" : "自动/手动重启时调用的方法",
},
}
"""
if self.check_prerequisites() is True:
super().__init__()
else:
sys.exit(0)
self.shutdown_signals = [
"SIGQUIT", # quit 信号
"SIGINT", # 键盘信号
"SIGHUP", # nohup 命令
"SIGTERM", # kill 命令
]
for s in self.shutdown_signals:
# 捕获退出信号后的要调用的,唯一的 shutdown 接口
try:
if hasattr(signal, s):
signal.signal(getattr(signal, s, None),
self.__on_termination__)
except Exception as e:
self.logger.info("绑定退出信号：{}失败，可能与windows系统有关。".format(s))
# 清空它，在run以后重新实例化
# 否则windows下会无法pickle
self.logger = None