def __init__(self, command):
"""
Constructor for the DNA Duplex property manager.
"""
self.endPoint1 = None
self.endPoint2 = None
self._conformation = "B-DNA"
self._numberOfBases = 0
self._basesPerTurn = getDuplexBasesPerTurn(self._conformation)
self._duplexRise = getDuplexRise(self._conformation)
self._duplexLength = getDuplexLength(self._conformation,
self._numberOfBases)
_superclass.__init__(self, command)
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_CANCEL_BUTTON | \
PM_WHATS_THIS_BUTTON)
def __init__( self, command ):
"""
Constructor for the DNA Duplex property manager.
"""
self.endPoint1 = None
self.endPoint2 = None
self._conformation = "B-DNA"
self._numberOfBases = 0
self._basesPerTurn = getDuplexBasesPerTurn(self._conformation)
self._duplexRise = getDuplexRise(self._conformation)
self._duplexLength = getDuplexLength(self._conformation,
self._numberOfBases)
_superclass.__init__( self, command)
self.showTopRowButtons( PM_DONE_BUTTON | \
PM_CANCEL_BUTTON | \
PM_WHATS_THIS_BUTTON)
def conformationComboBoxChanged(self, inIndex):
"""
Slot for the Conformation combobox. It is called whenever the
Conformation choice is changed.
@param inIndex: The new index.
@type inIndex: int
"""
conformation = self.conformationComboBox.currentText()
if conformation == "B-DNA":
self.basesPerTurnDoubleSpinBox.setValue("10.0")
elif conformation == "Z-DNA":
self.basesPerTurnDoubleSpinBox.setValue("12.0")
else:
msg = redmsg("conformationComboBoxChanged(): \
Error - unknown DNA conformation. Index = " + inIndex)
env.history.message(msg)
self.duplexLengthSpinBox.setSingleStep(getDuplexRise(conformation))
def conformationComboBoxChanged( self, inIndex ):
"""
Slot for the Conformation combobox. It is called whenever the
Conformation choice is changed.
@param inIndex: The new index.
@type inIndex: int
"""
conformation = self.conformationComboBox.currentText()
if conformation == "B-DNA":
self.basesPerTurnDoubleSpinBox.setValue("10.0")
elif conformation == "Z-DNA":
self.basesPerTurnDoubleSpinBox.setValue("12.0")
else:
msg = redmsg("conformationComboBoxChanged(): \
Error - unknown DNA conformation. Index = "+ inIndex)
env.history.message(msg)
self.duplexLengthSpinBox.setSingleStep(getDuplexRise(conformation))
class DnaSegment_EditCommand(State_preMixin, EditCommand):
"""
Command to edit a DnaSegment object.
To edit a segment, first enter BuildDna_EditCommand (accessed using Build> Dna)
then, select an axis chunk of an existing DnaSegment within the DnaGroup you
are editing. When you select the axis chunk, it enters DnaSegment_Editcommand
and shows the property manager with its widgets showing the properties of
selected segment.
"""
cmd = 'Dna Segment'
sponsor_keyword = 'DNA'
prefix = 'Segment ' # used for gensym
cmdname = "DNA_SEGMENT"
commandName = 'DNA_SEGMENT'
featurename = 'Edit Dna Segment'
command_should_resume_prevMode = True
command_has_its_own_gui = True
command_can_be_suspended = False
# Generators for DNA, nanotubes and graphene have their MT name
# generated (in GeneratorBaseClass) from the prefix.
create_name_from_prefix = True
call_makeMenus_for_each_event = True
#Graphics Mode
GraphicsMode_class = DnaSegment_GraphicsMode
#This is set to BuildDna_EditCommand.flyoutToolbar (as of 2008-01-14,
#it only uses
flyoutToolbar = None
handlePoint1 = State(Point, ORIGIN)
handlePoint2 = State(Point, ORIGIN)
#The minimum 'stopper'length used for resize handles
#@see: self._update_resizeHandle_stopper_length for details.
_resizeHandle_stopper_length = State(Width, -100000)
rotationHandleBasePoint1 = State(Point, ORIGIN)
rotationHandleBasePoint2 = State(Point, ORIGIN)
#See self._update_resizeHandle_radius where this gets changed.
#also see DnaSegment_ResizeHandle to see how its implemented.
handleSphereRadius1 = State(Width, HANDLE_RADIUS_DEFAULT_VALUE)
handleSphereRadius2 = State(Width, HANDLE_RADIUS_DEFAULT_VALUE)
cylinderWidth = State(Width, CYLINDER_WIDTH_DEFAULT_VALUE)
cylinderWidth2 = State(Width, CYLINDER_WIDTH_DEFAULT_VALUE)
#@TODO: modify the 'State params for rotation_distance
rotation_distance1 = State(Width, CYLINDER_WIDTH_DEFAULT_VALUE)
rotation_distance2 = State(Width, CYLINDER_WIDTH_DEFAULT_VALUE)
duplexRise = getDuplexRise('B-DNA')
leftHandle = Instance(
DnaSegment_ResizeHandle(
command=_self,
height_ref=call_Expr(ObjAttr_StateRef, _self, 'cylinderWidth'),
origin=handlePoint1,
fixedEndOfStructure=handlePoint2,
direction=norm_Expr(handlePoint1 - handlePoint2),
sphereRadius=handleSphereRadius1,
discRadius=env.prefs[dnaSegmentResizeHandle_discRadius_prefs_key],
discThickness=env.
prefs[dnaSegmentResizeHandle_discThickness_prefs_key],
range=(_resizeHandle_stopper_length, 10000)))
rightHandle = Instance(
DnaSegment_ResizeHandle(
command=_self,
height_ref=call_Expr(ObjAttr_StateRef, _self, 'cylinderWidth2'),
origin=handlePoint2,
fixedEndOfStructure=handlePoint1,
direction=norm_Expr(handlePoint2 - handlePoint1),
sphereRadius=handleSphereRadius2,
discRadius=env.prefs[dnaSegmentResizeHandle_discRadius_prefs_key],
discThickness=env.
prefs[dnaSegmentResizeHandle_discThickness_prefs_key],
range=(_resizeHandle_stopper_length, 10000)))
rotationHandle1 = Instance(
RotationHandle(command=_self,
rotationDistanceRef=call_Expr(ObjAttr_StateRef, _self,
'rotation_distance1'),
center=handlePoint1,
axis=norm_Expr(handlePoint1 - handlePoint2),
origin=rotationHandleBasePoint1,
radiusVector=norm_Expr(rotationHandleBasePoint1 -
handlePoint1)))
rotationHandle2 = Instance(
RotationHandle(command=_self,
rotationDistanceRef=call_Expr(ObjAttr_StateRef, _self,
'rotation_distance2'),
center=handlePoint2,
axis=norm_Expr(handlePoint2 - handlePoint1),
origin=rotationHandleBasePoint2,
radiusVector=norm_Expr(rotationHandleBasePoint2 -
handlePoint2)))
def __init__(self, commandSequencer, struct=None):
"""
Constructor for DnaDuplex_EditCommand
"""
glpane = commandSequencer
State_preMixin.__init__(self, glpane)
EditCommand.__init__(self, commandSequencer)
self.struct = struct
#Graphics handles for editing the structure .
self.handles = []
self.grabbedHandle = None
def init_gui(self):
"""
Initialize gui.
"""
#Note that DnaSegment_EditCommand only act as an edit command for an
#existing structure. The call to self.propMgr.show() is done only during
#the call to self.editStructure ..i .e. only after self.struct is
#updated. This is done because of the following reason:
# - self.init_gui is called immediately after entering the command.
# - self.init_gui in turn, initialized propMgr object and may also
# show the property manager. The self.propMgr.show routine calls
# an update widget method just before the show. This update method
# updates the widgets based on the parameters from the existing
# structure of the command (self.editCommand.struct)
# Although, it checks whether this structure exists, the editCommand
# could still have a self.struct attr from a previous run. (Note that
# EditCommand API was written before the command sequencer API and
# it has some loose ends like this. ) -- Ninad 2008-01-22
self.create_and_or_show_PM_if_wanted(showPropMgr=False)
def model_changed(self):
#This MAY HAVE BUG. WHEN --
#debug pref 'call model_changed only when needed' is ON
#See related bug 2729 for details.
#The following code that updates te handle positions and the strand
#sequence fixes bugs like 2745 and updating the handle positions
#updating handle positions in model_changed instead of in
#self.graphicsMode._draw_handles() is also a minor optimization
#This can be further optimized by debug pref
#'call model_changed only when needed' but its NOT done because of an
# issue menitoned in bug 2729 - Ninad 2008-04-07
EditCommand.model_changed(self) #This also calls the
#propMgr.model_changed
if self.grabbedHandle is not None:
return
#For Rattlesnake, PAM5 segment resizing is not supported.
#@see: self.hasResizableStructure()
if self.hasValidStructure():
isStructResizable, why_not = self.hasResizableStructure()
if not isStructResizable:
self.handles = []
return
elif len(self.handles) == 0:
self._updateHandleList()
self.updateHandlePositions()
self._update_previousParams_in_model_changed()
def _update_previousParams_in_model_changed(self):
#The following fixes bug 2802. The bug comment has details of what
#it does. Copying some portion of it below--
#We have fixed similar problem for strand resizing, by updating the
#self.previousParams attr in model_changed method (and also updating
#the numberOfBasePairs spinbox in the PM. But here, user can even
#change the number of basepairs from the PM. When he does that,
#the model_changed is called and it resets the number of basepairs
#spinbox value with the ones currently on the structure! Thereby
#making it impossible to upate structure using spinbox. To fix this
#we introduce a new parameter in propMgr.getParameters() which
#reports the actual number of bases on the structure.
#-- Ninad 2008-04-12
if self.previousParams is not None:
new_numberOfBasePairs = self.struct.getNumberOfBasePairs()
if new_numberOfBasePairs != self.previousParams[0]:
self.propMgr.numberOfBasePairsSpinBox.setValue(
new_numberOfBasePairs)
self.previousParams = self.propMgr.getParameters()
def editStructure(self, struct=None):
EditCommand.editStructure(self, struct)
if self.hasValidStructure():
self._updatePropMgrParams()
#Store the previous parameters. Important to set it after you
#set duplexRise and basesPerTurn attrs in the propMgr.
#self.previousParams is used in self._previewStructure and
#self._finalizeStructure to check if self.struct changed.
self.previousParams = self._gatherParameters()
#For Rattlesnake, we do not support resizing of PAM5 model.
#So don't append the exprs handles to the handle list (and thus
#don't draw those handles. See self.model_changed()
isStructResizable, why_not = self.hasResizableStructure()
if not isStructResizable:
self.handles = []
else:
self._updateHandleList()
self.updateHandlePositions()
def _updatePropMgrParams(self):
"""
Subclasses may override this method.
Update some property manager parameters with the parameters of
self.struct (which is being edited)
@see: self.editStructure()
"""
#Format in which params need to be provided to the Property manager
#(i.e. in propMgr.setParameters():
#numberOfBasePairs,
#dnaForm,
#dnaModel,
#basesPerTurn,
#duplexRise,
#endPoint1,
#endPoint2
basesPerTurn, duplexRise = self.struct.getProps()
endPoint1, endPoint2 = self.struct.getAxisEndPoints()
numberOfBasePairs = self.struct.getNumberOfBasePairs()
color = self.struct.getColor()
params_for_propMgr = (numberOfBasePairs, None, None, basesPerTurn,
duplexRise, endPoint1, endPoint2, color)
#TODO 2008-03-25: better to get all parameters from self.struct and
#set it in propMgr? This will mostly work except that reverse is
#not true. i.e. we can not specify same set of params for
#self.struct.setProps ...because endPoint1 and endPoint2 are derived.
#by the structure when needed. Commenting out following line of code
#UPDATE 2008-05-06 Fixes a bug due to which the parameters in propMGr
#of DnaSegment_EditCommand are not same as the original structure
#(e.g. bases per turn and duplexrise)
self.propMgr.setParameters(params_for_propMgr)
def keep_empty_group(self, group):
"""
Returns True if the empty group should not be automatically deleted.
otherwise returns False. The default implementation always returns
False. Subclasses should override this method if it needs to keep the
empty group for some reasons. Note that this method will only get called
when a group has a class constant autdelete_when_empty set to True.
(and as of 2008-03-06, it is proposed that dna_updater calls this method
when needed.
@see: Command.keep_empty_group() which is overridden here.
@see: BreakStrands_Command.keep_empty_group
@see: Group.autodelete_when_empty.. a class constant used by the
dna_updater (the dna updater then decides whether to call this
method to see which empty groups need to be deleted)
"""
bool_keep = EditCommand.keep_empty_group(self, group)
if not bool_keep:
if self.hasValidStructure():
if group is self.struct:
bool_keep = True
elif group is self.struct.parent_node_of_class(
self.assy.DnaGroup):
bool_keep = True
#If this command doesn't have a valid structure, as a fall back,
#lets instruct it to keep ALL the DnaGroup objects even when empty
#Reason? ..see explanation in BreakStrands_Command.keep_empty_group
elif isinstance(group, self.assy.DnaGroup):
bool_keep = True
return bool_keep
def hasResizableStructure(self):
"""
For Rattlesnake release, we dont support segment resizing for PAM5
models. If the structure is not resizable, the handles won't be drawn
@see:self.model_changed()
@see:DnaSegment_PropertyManager.model_changed()
@see: self.editStructure()
@see: DnaSegment.is_PAM3_DnaSegment()
"""
#Note: This method fixes bugs similar to bug 2812 but the changes
#didn't made it to Rattlesnake rc2 -- Ninad 2008-04-16
isResizable = True
why_not = ''
if not self.hasValidStructure():
isResizable = False
why_not = 'It is invalid.'
return isResizable, why_not
isResizable = self.struct.is_PAM3_DnaSegment()
if not isResizable:
why_not = 'It needs to be converted to PAM3 model'
return isResizable, why_not
endAtom1, endAtom2 = self.struct.getAxisEndAtoms()
if endAtom1 is None or endAtom2 is None:
isResizable = False
why_not = "Unable to determine one or both end atoms of the segment"
return isResizable, why_not
if endAtom1 is endAtom2:
isResizable = False
why_not = "Resizing a segment with single atom is unsupported"
return isResizable, why_not
return isResizable, why_not
def hasValidStructure(self):
"""
Tells the caller if this edit command has a valid structure.
Overrides EditCommand.hasValidStructure()
"""
#(By Bruce 2008-02-13)
isValid = EditCommand.hasValidStructure(self)
if not isValid:
return isValid
# would like to check here whether it's empty of axis chunks;
# instead, this will do for now (probably too slow, though):
p1, p2 = self.struct.getAxisEndPoints()
return (p1 is not None)
def _getStructureType(self):
"""
Subclasses override this method to define their own structure type.
Returns the type of the structure this editCommand supports.
This is used in isinstance test.
@see: EditCommand._getStructureType() (overridden here)
"""
return self.win.assy.DnaSegment
def _updateHandleList(self):
"""
Updates the list of handles (self.handles)
@see: self.editStructure
@see: DnaSegment_GraphicsMode._drawHandles()
"""
# note: if handlePoint1 and/or handlePoint2 can change more often than this
# runs, we'll need to rerun the two assignments above whenever they
# change and before the handle is drawn. An easy way would be to rerun
# these assignments in the draw method of our GM. [bruce 080128]
self.handles = [] # guess, but seems like a good idea [bruce 080128]
self.handles.append(self.leftHandle)
self.handles.append(self.rightHandle)
if DEBUG_ROTATION_HANDLES:
self.handles.append(self.rotationHandle1)
self.handles.append(self.rotationHandle2)
def updateHandlePositions(self):
"""
Update handle positions and also update the resize handle radii and
their 'stopper' lengths.
@see: self._update_resizeHandle_radius()
@see: self._update_resizeHandle_stopper_length()
@see: DnaSegment_GraphicsMode._drawHandles()
"""
if len(self.handles) == 0:
#No handles are appended to self.handles list.
#@See self.model_changed() and self._updateHandleList()
return
#TODO: Call this method less often by implementing model_changed
#see bug 2729 for a planned optimization
self.cylinderWidth = CYLINDER_WIDTH_DEFAULT_VALUE
self.cylinderWidth2 = CYLINDER_WIDTH_DEFAULT_VALUE
self._update_resizeHandle_radius()
handlePoint1, handlePoint2 = self.struct.getAxisEndPoints()
if handlePoint1 is not None and handlePoint2 is not None:
# (that condition is bugfix for deleted axis segment, bruce 080213)
self.handlePoint1, self.handlePoint2 = handlePoint1, handlePoint2
#Update the 'stopper' length where the resize handle being dragged
#should stop. See self._update_resizeHandle_stopper_length()
#for more details
self._update_resizeHandle_stopper_length()
if DEBUG_ROTATION_HANDLES:
self.rotation_distance1 = CYLINDER_WIDTH_DEFAULT_VALUE
self.rotation_distance2 = CYLINDER_WIDTH_DEFAULT_VALUE
#Following computes the base points for rotation handles.
#to be revised -- Ninad 2008-02-13
unitVectorAlongAxis = norm(self.handlePoint1 -
self.handlePoint2)
v = cross(self.glpane.lineOfSight, unitVectorAlongAxis)
self.rotationHandleBasePoint1 = self.handlePoint1 + norm(
v) * 4.0
self.rotationHandleBasePoint2 = self.handlePoint2 + norm(
v) * 4.0
def _update_resizeHandle_radius(self):
"""
Finds out the sphere radius to use for the resize handles, based on
atom /chunk or glpane display (whichever decides the display of the end
atoms.
@see: self.updateHandlePositions()
@see: B{Atom.drawing_radius()}
"""
atm1, atm2 = self.struct.getAxisEndAtoms()
if atm1 is not None:
self.handleSphereRadius1 = max(1.25 * atm1.drawing_radius(),
1.25 * HANDLE_RADIUS_DEFAULT_VALUE)
if atm2 is not None:
self.handleSphereRadius2 = max(1.25 * atm2.drawing_radius(),
1.25 * HANDLE_RADIUS_DEFAULT_VALUE)
def _update_resizeHandle_stopper_length(self):
"""
Update the limiting length at which the resize handle being dragged
should 'stop' without proceeding further in the drag direction.
The segment resize handle stops when you are dragging it towards the
other resizeend and the distance between the two ends reaches two
duplexes.
The self._resizeHandle_stopper_length computed in this method is
used as a lower limit of the 'range' option provided in declaration
of resize handle objects (see class definition for the details)
@see: self.updateHandlePositions()
"""
total_length = vlen(self.handlePoint1 - self.handlePoint2)
duplexRise = self.struct.getDuplexRise()
#Length of the duplex for 2 base pairs
two_bases_length = getDuplexLength('B-DNA', 2, duplexRise=duplexRise)
self._resizeHandle_stopper_length = -total_length + two_bases_length
def _createPropMgrObject(self):
"""
Creates a property manager object (that defines UI things) for this
editCommand.
"""
assert not self.propMgr
propMgr = self.win.createDnaSegmentPropMgr_if_needed(self)
return propMgr
def _gatherParameters(self):
"""
Return the parameters from the property manager UI.
@return: All the parameters (get those from the property manager):
- numberOfBases
- dnaForm
- basesPerTurn
- endPoint1
- endPoint2
@rtype: tuple
"""
return self.propMgr.getParameters()
def _createStructure(self):
"""
Creates and returns the structure (in this case a L{Group} object that
contains the DNA strand and axis chunks.
@return : group containing that contains the DNA strand and axis chunks.
@rtype: L{Group}
@note: This needs to return a DNA object once that model is implemented
"""
params = self._gatherParameters()
# No error checking in build_struct, do all your error
# checking in gather_parameters
number_of_basePairs_from_struct,\
numberOfBases, \
dnaForm, \
dnaModel, \
basesPerTurn, \
duplexRise, \
endPoint1, \
endPoint2, \
color_junk = params
#Note: color_junk is not used. Ideally it should do struct.setColor(color)
#but the color combobox in the PM directly sets the color of the
#structure to the specified one when the current index in the combobx
#changes
#If user enters the number of basepairs and hits preview i.e. endPoint1
#and endPoint2 are not entered by the user and thus have default value
#of V(0, 0, 0), then enter the endPoint1 as V(0, 0, 0) and compute
#endPoint2 using the duplex length.
#Do not use '==' equality check on vectors! its a bug. Use same_vals
# or Veq instead.
if Veq(endPoint1, endPoint2) and Veq(endPoint1, V(0, 0, 0)):
endPoint2 = endPoint1 + \
self.win.glpane.right*getDuplexLength('B-DNA',
numberOfBases)
if numberOfBases < 1:
msg = redmsg("Cannot preview/insert a DNA duplex with 0 bases.")
self.propMgr.updateMessage(msg)
self.dna = None # Fixes bug 2530. Mark 2007-09-02
return None
if dnaForm == 'B-DNA':
if dnaModel == 'PAM3':
dna = B_Dna_PAM3()
elif dnaModel == 'PAM5':
dna = B_Dna_PAM5()
else:
print "bug: unknown dnaModel type: ", dnaModel
else:
raise PluginBug("Unsupported DNA Form: " + dnaForm)
self.dna = dna # needed for done msg
# self.name needed for done message
if self.create_name_from_prefix:
# create a new name
name = self.name = gensym(self.prefix,
self.win.assy) # (in _build_struct)
self._gensym_data_for_reusing_name = (self.prefix, name)
else:
# use externally created name
self._gensym_data_for_reusing_name = None
# (can't reuse name in this case -- not sure what prefix it was
# made with)
name = self.name
# Create the model tree group node.
# Make sure that the 'topnode' of this part is a Group (under which the
# DNa group will be placed), if the topnode is not a group, make it a
# a 'Group' (applicable to Clipboard parts).See part.py
# --Part.ensure_toplevel_group method. This is an important line
# and it fixes bug 2585
self.win.assy.part.ensure_toplevel_group()
dnaSegment = DnaSegment(self.name,
self.win.assy,
self.win.assy.part.topnode,
editCommand=self)
try:
# Make the DNA duplex. <dnaGroup> will contain three chunks:
# - Strand1
# - Strand2
# - Axis
dna.make(dnaSegment, numberOfBases, basesPerTurn, duplexRise,
endPoint1, endPoint2)
#set some properties such as duplexRise and number of bases per turn
#This information will be stored on the DnaSegment object so that
#it can be retrieved while editing this object.
#This works with or without dna_updater. Now the question is
#should these props be assigned to the DnaSegment in
#dnaDuplex.make() itself ? This needs to be answered while modifying
#make() method to fit in the dna data model. --Ninad 2008-03-05
#WARNING 2008-03-05: Since self._modifyStructure calls
#self._createStructure()
#If in the near future, we actually permit modifying a
#structure (such as dna) without actually recreating the whole
#structre, then the following properties must be set in
#self._modifyStructure as well. Needs more thought.
props = (duplexRise, basesPerTurn)
dnaSegment.setProps(props)
return dnaSegment
except (PluginBug, UserError):
# Why do we need UserError here? Mark 2007-08-28
dnaSegment.kill()
raise PluginBug(
"Internal error while trying to create DNA duplex.")
def _modifyStructure(self, params):
"""
Modify the structure based on the parameters specified.
Overrides EditCommand._modifystructure. This method removes the old
structure and creates a new one using self._createStructure. This
was needed for the structures like this (Dna, Nanotube etc) . .
See more comments in the method.
"""
assert self.struct
self.dna = B_Dna_PAM3()
number_of_basePairs_from_struct,\
numberOfBases, \
dnaForm, \
dnaModel, \
basesPerTurn, \
duplexRise, \
endPoint1, \
endPoint2 , \
color = params
#Delete unused parameters.
del endPoint1
del endPoint2
del number_of_basePairs_from_struct
numberOfBasePairsToAddOrRemove = self._determine_numberOfBasePairs_to_change(
)
ladderEndAxisAtom = self.get_axisEndAtom_at_resize_end()
if numberOfBasePairsToAddOrRemove != 0:
resizeEnd_final_position = self._get_resizeEnd_final_position(
ladderEndAxisAtom, abs(numberOfBasePairsToAddOrRemove),
duplexRise)
self.dna.modify(self.struct, ladderEndAxisAtom,
numberOfBasePairsToAddOrRemove, basesPerTurn,
duplexRise, ladderEndAxisAtom.posn(),
resizeEnd_final_position)
#Find new end points of structure parameters after modification
#and set these values in the propMgr.
new_end1, new_end2 = self.struct.getAxisEndPoints()
params_to_set_in_propMgr = (numberOfBases, dnaForm, dnaModel,
basesPerTurn, duplexRise, new_end1,
new_end2, color)
#TODO: Need to set these params in the PM
#and then self.previousParams = params_to_set_in_propMgr
self.previousParams = params
return
def _get_resizeEnd_final_position(self, ladderEndAxisAtom, numberOfBases,
duplexRise):
final_position = None
if self.grabbedHandle:
final_position = self.grabbedHandle.currentPosition
else:
other_axisEndAtom = self.struct.getOtherAxisEndAtom(
ladderEndAxisAtom)
axis_vector = ladderEndAxisAtom.posn() - other_axisEndAtom.posn()
segment_length_to_add = getDuplexLength('B-DNA',
numberOfBases,
duplexRise=duplexRise)
final_position = ladderEndAxisAtom.posn(
) + norm(axis_vector) * segment_length_to_add
return final_position
def getStructureName(self):
"""
Returns the name string of self.struct if there is a valid structure.
Otherwise returns None. This information is used by the name edit field
of this command's PM when we call self.propMgr.show()
@see: DnaSegment_PropertyManager.show()
@see: self.setStructureName
"""
if self.hasValidStructure():
return self.struct.name
else:
return None
def setStructureName(self, name):
"""
Sets the name of self.struct to param <name> (if there is a valid
structure.
The PM of this command callss this method while closing itself
@param name: name of the structure to be set.
@type name: string
@see: DnaSegment_PropertyManager.close()
@see: self.getStructureName()
"""
#@BUG: We call this method in self.propMgr.close(). But propMgr.close()
#is called even when the command is 'cancelled'. That means the
#structure will get changed even when user hits cancel button or
#exits the command by clicking on empty space.
#This should really be done in self._finalizeStructure but that
#method doesn't get called when you click on empty space to exit
#the command. See DnaSegment_GraphicsMode.leftUp for a detailed
#comment.
if self.hasValidStructure():
self.struct.name = name
def getCursorText(self):
"""
This is used as a callback method in DnaLine mode
@see: DnaLineMode.setParams, DnaLineMode_GM.Draw
"""
#@TODO: Refactor this. Similar code exists in
#DnaStrand_EditCommand.getCursorText() -- Ninad 2008-04-12
if self.grabbedHandle is None:
return
currentPosition = self.grabbedHandle.currentPosition
fixedEndOfStructure = self.grabbedHandle.fixedEndOfStructure
duplexRise = self.struct.getDuplexRise()
#############
raw_numberOfBasePairsToAddOrRemove = self._determine_numberOfBasePairs_to_change(
)
#Following fixes bugs like 2904 and 2906
#Note that we are using numberOfBasePairsToAddOrRemove in self._modifyStructure()
#if self._determine_numberOfBasePairs_to_change() returns the number of basepairs
#to add, it returns 1 more than the actual number of basepairs. Because
#while creating the dna, it removes the first base pair of the newly created
#dna. So, for cursor text and for PM spinbox, we should make adjustments to the
#raw_numberOfBasePairsToAddOrRemove so that it reflects the correct value
#in the spinbox and in the PM
if raw_numberOfBasePairsToAddOrRemove > 1:
numberOfBasePairsToAddOrRemove = raw_numberOfBasePairsToAddOrRemove - 1
else:
numberOfBasePairsToAddOrRemove = raw_numberOfBasePairsToAddOrRemove
##############
current_numberOfBasePairs = self.struct.getNumberOfBasePairs()
numberOfBasePairs = current_numberOfBasePairs + numberOfBasePairsToAddOrRemove
#@TODO: The following updates the PM as the cursor moves.
#Need to rename this method so that you that it also does more things
#than just to return a textString -- Ninad 2007-12-20
self.propMgr.numberOfBasePairsSpinBox.setValue(numberOfBasePairs)
#Note: for Rattlesnake rc2, the text color is green when bases are added
#, red when subtracted black when no change. But this implementation is
#changed based on Mark's user experience. The text is now always shown
#in black color. -- Ninad 2008-04-17
textColor = black
text = ""
if not env.prefs[
dnaSegmentEditCommand_showCursorTextCheckBox_prefs_key]:
return '', black
#@@TODO: refactor.
#this duplex length canculation fixes bug 2906
duplexLength = getDuplexLength('B-DNA',
numberOfBasePairs,
duplexRise=duplexRise)
#Cursor text strings --
duplexLengthString = str(round(duplexLength, 3))
numberOfBasePairsString = self._getCursorText_numberOfBasePairs(
numberOfBasePairs)
duplexLengthString = self._getCursorText_length(duplexLength)
changedBasePairsString = self._getCursorText_changedBasePairs(
numberOfBasePairs)
#Add commas (to be refactored)
commaString = ", "
text = numberOfBasePairsString
if text and changedBasePairsString:
text += " " # commaString not needed here. Mark 2008-07-03
text += changedBasePairsString
if text and duplexLengthString:
text += commaString
text += duplexLengthString
return (text, textColor)
def _getCursorText_numberOfBasePairs(self, numberOfBasePairs):
"""
Return the cursor textstring that gives information about the number
of basepairs if the corresponding prefs_key returns True.
"""
numberOfBasePairsString = ''
if env.prefs[
dnaSegmentEditCommand_cursorTextCheckBox_numberOfBasePairs_prefs_key]:
numberOfBasePairsString = "%db" % numberOfBasePairs
return numberOfBasePairsString
def _getCursorText_length(self, duplexLength):
"""
"""
duplexLengthString = ''
if env.prefs[
dnaSegmentEditCommand_cursorTextCheckBox_length_prefs_key]:
lengthUnitString = 'A'
#change the unit of length to nanometers if the length is > 10A
#fixes part of bug 2856
if duplexLength > 10.0:
lengthUnitString = 'nm'
duplexLength = duplexLength * 0.1
duplexLengthString = "%5.3f%s" % (duplexLength, lengthUnitString)
return duplexLengthString
def _getCursorText_changedBasePairs(self, numberOfBasePairs):
"""
"""
changedBasePairsString = ''
if env.prefs[
dnaSegmentEditCommand_cursorTextCheckBox_changedBasePairs_prefs_key]:
original_numberOfBasePairs = self.struct.getNumberOfBasePairs()
changed_basePairs = numberOfBasePairs - original_numberOfBasePairs
if changed_basePairs > 0:
changedBasePairsString = "(" + "+" + str(
changed_basePairs) + ")"
else:
changedBasePairsString = "(" + str(changed_basePairs) + ")"
return changedBasePairsString
def getDnaRibbonParams(self):
"""
Returns parameters for drawing the dna ribbon.
If the dna rubberband line should NOT be drawn (example when you are
removing basepairs from the segment
So the caller should check if the method return value is not None.
@see: DnaSegment_GraphicsMode._draw_handles()
"""
if self.grabbedHandle is None:
return None
if self.grabbedHandle.origin is None:
return None
direction_of_drag = norm(self.grabbedHandle.currentPosition - \
self.grabbedHandle.origin)
#If the segment is being shortened (determined by checking the
#direction of drag) , no need to draw the rubberband line.
if dot(self.grabbedHandle.direction, direction_of_drag) < 0:
return None
basesPerTurn = self.struct.getBasesPerTurn()
duplexRise = self.struct.getDuplexRise()
ladderEndAxisAtom = self.get_axisEndAtom_at_resize_end()
ladder = ladderEndAxisAtom.molecule.ladder
endBaseAtomList = ladder.get_endBaseAtoms_containing_atom(
ladderEndAxisAtom)
ribbon1_start_point = None
ribbon2_start_point = None
ribbon1_direction = None
ribbon2_direction = None
ribbon1Color = applegreen
ribbon2Color = applegreen
if endBaseAtomList and len(endBaseAtomList) > 2:
strand_atom1 = endBaseAtomList[0]
strand_atom2 = endBaseAtomList[2]
if strand_atom1:
ribbon1_start_point = strand_atom1.posn()
for bond_direction, neighbor in strand_atom1.bond_directions_to_neighbors(
):
if neighbor and neighbor.is_singlet():
ribbon1_direction = bond_direction
break
ribbon1Color = strand_atom1.molecule.color
if not ribbon1Color:
ribbon1Color = strand_atom1.element.color
if strand_atom2:
ribbon2_start_point = strand_atom2.posn()
for bond_direction, neighbor in strand_atom2.bond_directions_to_neighbors(
):
if neighbor and neighbor.is_singlet():
ribbon2_direction = bond_direction
break
ribbon2Color = strand_atom2.molecule.color
if not ribbon2Color:
ribbon2Color = strand_atom2.element.color
return (self.grabbedHandle.origin, self.grabbedHandle.currentPosition,
basesPerTurn, duplexRise, ribbon1_start_point,
ribbon2_start_point, ribbon1_direction, ribbon2_direction,
ribbon1Color, ribbon2Color)
def modifyStructure(self):
"""
Called when a resize handle is dragged to change the length of the
segment. (Called upon leftUp) . This method assigns the new parameters
for the segment after it is resized and calls
preview_or_finalize_structure which does the rest of the job.
Note that Client should call this public method and should never call
the private method self._modifyStructure. self._modifyStructure is
called only by self.preview_or_finalize_structure
@see: B{DnaSegment_ResizeHandle.on_release} (the caller)
@see: B{SelectChunks_GraphicsMode.leftUp} (which calls the
the relevent method in DragHandler API. )
@see: B{exprs.DraggableHandle_AlongLine}, B{exprs.DragBehavior}
@see: B{self.preview_or_finalize_structure }
@see: B{self._modifyStructure}
As of 2008-02-01 it recreates the structure
@see: a note in self._createStructure() about use of dnaSegment.setProps
"""
#TODO: need to cleanup this and may be use use something like
#self.previousParams = params in the end -- 2008-03-24 (midnight)
if self.grabbedHandle is None:
return
##self.propMgr.setParameters(params_to_set_in_propMgr)
#TODO: Important note: How does NE1 know that structure is modified?
#Because number of base pairs parameter in the PropMgr changes as you
#drag the handle . This is done in self.getCursorText() ... not the
#right place to do it. OR that method needs to be renamed to reflect
#this as suggested in that method -- Ninad 2008-03-25
self.preview_or_finalize_structure(previewing=True)
##self.previousParams = params_to_set_in_propMgr
self.glpane.gl_update()
def get_axisEndAtom_at_resize_end(self):
ladderEndAxisAtom = None
if self.grabbedHandle is not None:
ladderEndAxisAtom = self.struct.getAxisEndAtomAtPosition(
self.grabbedHandle.origin)
else:
endAtom1, endAtom2 = self.struct.getAxisEndAtoms()
ladderEndAxisAtom = endAtom2
return ladderEndAxisAtom
def _determine_numberOfBasePairs_to_change(self):
"""
"""
duplexRise = self.struct.getDuplexRise()
numberOfBasesToAddOrRemove = 0
#Following helps fixing bugs like 2904 and 2906 see also self.getCursorText()
#and TODO items in that method. Also note that the grabbed handle case
#is similar to the one in MultipleDnaSegmentResize_EditCommand.
#needs refactoring and overall cleanup.
if self.grabbedHandle is not None:
currentPosition = self.grabbedHandle.currentPosition
fixedEndOfStructure = self.grabbedHandle.fixedEndOfStructure
changedLength = vlen(currentPosition - self.grabbedHandle.origin)
direction_of_drag = norm(self.grabbedHandle.currentPosition - \
self.grabbedHandle.origin)
#Even when the direction of drag is negative (i.e. the basepairs being
#removed), make sure not to remove base pairs for very small movement
#of the grabbed handle
if changedLength < 0.2 * duplexRise:
return 0
#This check quickly determines if the grabbed handle moved by a distance
#more than the duplexRise and avoids further computations
#This condition is applicable only when the direction of drag is
#positive..i.e. bases bing added to the segment.
if changedLength < duplexRise and \
dot(self.grabbedHandle.direction, direction_of_drag) > 0:
return 0
#If the segment is being shortened (determined by checking the
#direction of drag)
numberOfBasesToAddOrRemove = \
getNumberOfBasePairsFromDuplexLength(
'B-DNA',
changedLength,
duplexRise = duplexRise)
if dot(self.grabbedHandle.direction, direction_of_drag) < 0:
numberOfBasesToAddOrRemove = -numberOfBasesToAddOrRemove
if numberOfBasesToAddOrRemove > 0:
#dna.modify will remove the first base pair it creates
#(that basepair will only be used for proper alignment of the
#duplex with the existing structure) So we need to compensate for
#this basepair by adding 1 to the new number of base pairs.
#UPDATE 2008-05-14: The following commented out code
#i.e. "##numberOfBasesToAddOrRemove += 1" is not required in this
#class , because the way we compute the number of base pairs to
#be added is different than than how its done at the moment in the
#superclass. In this method, we compute bases to be added from
#the resize end and that computation INCLUDES the resize end.
#so the number that it returns is already one more than the actual
#bases to be added. so commenting out the following line
# -- Ninad 2008-05-14
##numberOfBasesToAddOrRemove += 1
pass
else:
#The Property manager will be showing the current number
#of base pairs (w. May be we can use that number directly here?
#The following is safer to do so lets just recompute the
#number of base pairs. (if it turns out to be slow, we will consider
#using the already computed calue from the property manager
new_numberOfBasePairs = self.propMgr.numberOfBasePairsSpinBox.value(
)
endPoint1, endPoint2 = self.struct.getAxisEndPoints()
if endPoint1 is None or endPoint2 is None:
return 0
original_duplex_length = vlen(endPoint1 - endPoint2)
original_numberOfBasePairs = self.struct.getNumberOfBasePairs()
numberOfBasesToAddOrRemove = new_numberOfBasePairs - original_numberOfBasePairs
if numberOfBasesToAddOrRemove > 0:
#dna.modify will remove the first base pair it creates
#(that basepair will only be used for proper alignment of the
#duplex with the existing structure) So we need to compensate for
#this basepair by adding 1 to the new number of base pairs.
numberOfBasesToAddOrRemove += 1
return numberOfBasesToAddOrRemove
def makeMenus(self):
"""
Create context menu for this command. (Build Dna mode)
"""
if not hasattr(self, 'graphicsMode'):
return
selobj = self.glpane.selobj
if selobj is None:
return
self.Menu_spec = []
highlightedChunk = None
if isinstance(selobj, Chunk):
highlightedChunk = selobj
if isinstance(selobj, Atom):
highlightedChunk = selobj.molecule
elif isinstance(selobj, Bond):
chunk1 = selobj.atom1.molecule
chunk2 = selobj.atom2.molecule
if chunk1 is chunk2 and chunk1 is not None:
highlightedChunk = chunk1
if highlightedChunk is None:
return
if self.hasValidStructure():
dnaGroup = self.struct.parent_node_of_class(self.assy.DnaGroup)
if dnaGroup is None:
return
#following should be self.struct.getDnaGroup or self.struct.getDnaGroup
#need to formalize method name and then make change.
if not dnaGroup is highlightedChunk.parent_node_of_class(
self.assy.DnaGroup):
item = ("Edit unavailable: Member of a different DnaGroup",
noop, 'disabled')
self.Menu_spec.append(item)
return
highlightedChunk.make_glpane_context_menu_items(self.Menu_spec,
command=self)
