def __init__(self, manager, device, log):
"""Init remote control type daikin"""
self._manager = manager
self._device = device
self.cmdCode = CodeIRDaikin(self, self._device['name'])
self._log = log
self._currentAck = None
def __init__(self, manager, device, log):
"""Init remote control type daikin"""
self._manager = manager
self._device = device
self.cmdCode = CodeIRDaikin(self, self._device['name'])
self._log = log
self._currentAck = None
class DaikinRemote():
"""Remote control type Daikin object"""
def __init__(self, manager, device, log):
"""Init remote control type daikin"""
self._manager = manager
self._device = device
self.cmdCode = CodeIRDaikin(self, self._device['name'])
self._log = log
self._currentAck = None
# On accède aux attributs uniquement depuis les property
getRemoteId = property(lambda self: getRemoteId(self._device))
getDomogikDevice = property(lambda self: self._getDomogikDevice())
getIRDevice = property(lambda self: self._getIRDevice())
def updateDevice(self, device):
"""Update device data."""
self._device = device
def _getDomogikDevice(self):
"""Return device Id for xPL domogik device"""
if self._device :
# try to find in xpl_commands
for a_cmd in self._device['xpl_commands']:
for a_param in self._device['xpl_commands'][a_cmd]['parameters']:
if a_param['key'] == 'device' : return a_param['value']
# try to find in xpl_stats
for a_stat in self._device['xpl_stats']:
for a_param in self._device['xpl_stats'][a_stat]['parameters']['static']:
if a_param['key'] == 'device' : return a_param['value']
return None
else : return None
def _getDatatype(self):
"""Return datatype for xPL domogik device"""
if self._device :
return self._device['parameters']["datatype"]['value']
else : return None
def _getIRDevice(self):
"""Return IRDevice for IRTrans."""
if self._device : return self._device['parameters']["irdevice"]['value']
else : return ""
def sendToIRdevice(self):
"""Send xpl-cmnd to IRTrans Transmitter."""
# TODO : gérer les datatypes
data = {"device": self._device['parameters']["irdevice"]['value'], "command": "send", "datatype": self._getDatatype()}
if self._getDatatype() == "BinTimings" :
data["code"] = self.cmdCode.encodeCmdIRTrans()
data["timing"] = self.cmdCode.timing.encodeTimingIRTrans()
self._manager._cb_send_xPL("xpl-cmnd", "irtrans.basic", data)
else : self._log.info (u"datatype : {0} not handled, xpl-cmnd to IR transmitter not send.".format(self._getDatatype()))
def sendDomogikXplUpdate(self, item):
"""Send xpl-trig to domogik device."""
data = {"device": self.getDomogikDevice}
for cmd in item :
data.update({'type' : cmd})
if cmd in ['power', 'vertical-swing', 'horizontal-swing', 'powerfull', 'silent', 'home-leave', 'sensor'] :
data.update({'state': item[cmd]})
elif cmd == 'setmode' :
data.update({'mode': item[cmd]})
elif cmd == 'setpoint' :
data.update({'temp': item[cmd]})
elif cmd == 'speedfan' :
data.update({'speed': item[cmd]})
elif cmd in ['datetime', 'starttime', 'stoptime'] :
data.update({'time': self.cmdCode.formatStrDelais(item[cmd])})
else :
data.update({cmd: item[cmd]})
self._manager._cb_send_xPL('xpl-trig', 'sensor.basic', data)
def udpateAllFromCode(self, code):
"""Update all sensors value from ir code and send xpl-trig."""
states = self.cmdCode.decodeCodeBin(code)
states["current"].update(states["toUpdate"])
for toUpd in states["current"] :
self.cmdCode.setCmd(toUpd, states["current"][toUpd])
self.sendDomogikXplUpdate({toUpd: states["current"][toUpd]})
self.cmdCode.isUpdate = True
def handle_xpl_cmd(self, xPLmessage):
"""Handle a xpl-cmnd message from hub"""
data = {'device': xPLmessage['device']}
if xPLmessage['command'] == 'switch' :
if xPLmessage.has_key('power') : cmd = 'power'
elif xPLmessage.has_key('vertical-swing') : cmd = 'vertical-swing'
elif xPLmessage.has_key('horizontal-swing') : cmd = 'horizontal-swing'
elif xPLmessage.has_key('powerfull') : cmd = 'powerfull'
elif xPLmessage.has_key('silent') : cmd = 'silent'
elif xPLmessage.has_key('home-leave') : cmd = 'home-leave'
elif xPLmessage.has_key('sensor') : cmd = 'sensor'
else :
self._log.debug(u"DaikinRemote object, unknows xPL command : {0}".format(xPLmessage))
return
if self.cmdCode.setCmd(cmd, xPLmessage[cmd]) :
self.sendToIRdevice();
value = xPLmessage[cmd]
else : value = self.cmdCode.getCmd(cmd)["value"]
data.update({'type': cmd, 'state': value})
elif xPLmessage['command'] == 'setpoint':
if self.cmdCode.setCmd("setpoint", int(xPLmessage['temp'])) :
self.sendToIRdevice();
value = xPLmessage['temp']
else : value = self.cmdCode.getCmd("setpoint")["option"]
data.update( {'type': "setpoint", 'temp': value})
elif xPLmessage['command'] == 'setmode':
if self.cmdCode.setCmd("setmode", xPLmessage["mode"]) :
self.sendToIRdevice();
value = xPLmessage['mode']
else : value = self.cmdCode.getCmd("setmode")["value"]
data.update({'type': "setmode", 'mode': value})
elif xPLmessage['command'] == 'speedfan':
if self.cmdCode.setCmd("speedfan", xPLmessage["speed"]) :
self.sendToIRdevice();
value = xPLmessage['speed']
else : value = self.cmdCode.getCmd("speedfan")["value"]
data.update({'type': "speedfan", 'speed': value})
elif xPLmessage['command'] == 'settime':
if xPLmessage.has_key('starttime') : cmd = 'starttime'
elif xPLmessage.has_key('stoptime') : cmd = 'stoptime'
elif xPLmessage.has_key('datetime') :
cmd = 'datetime' # TODO : to handle in daikin codage rpi
self._log.debug(u"DaikinRemote object, date time set not handled actually.")
return
if self.cmdCode.setCmd(cmd, xPLmessage[cmd]):
self.sendToIRdevice();
value = xPLmessage[cmd]
else :
self._log.debug(u"DaikinRemote object, unknows time definition in xPL command : {0}".format(xPLmessage))
value = self.cmdCode.getCmd(cmd)["option"]
data.update({'type': "time", 'time': value})
else :
self._log.debug(u"DaikinRemote object, unknows xPL command : {0}".format(xPLmessage))
return
# self._manager.sendXplAck(data)
self._currentAck = data
def handle_xpl_trig(self, message):
"""Handle a xpl-trig message from hub"""
if message.has_key('type'):
if message.has_key('device'):
if message['type'] == 'ack_ir_cmd' and message['device'] == self.getIRDevice :
if self._currentAck :
if message['result'] == 'ok':
self._manager.sendXplAck(self._currentAck)
else :
self._log.debug(u"DaikinRemote object, Error on ack IRTrans message : {0}, Error : {1}".format(self._currentAck, message['result']))
self._currentAck =None
else :
self._log.debug(u"DaikinRemote object, unknows xPL Ack trig : {0}".format(message))
elif message['type'] == 'code_ir':
self._log.debug(u"DaikinRemote object receiver an IR Code.")
if not self.cmdCode.isUpdate :
self.udpateAllFromCode(message['code'])
else :
states = self.cmdCode.decodeCodeBin(message['code'])
for toUpd in states["toUpdate"] :
self.cmdCode.setCmd(toUpd, states["toUpdate"][toUpd])
self.sendDomogikXplUpdate({toUpd: states["toUpdate"][toUpd]})
elif message['type'] == 'power' and message['device'] == self.getIRDevice : # En cas de reception de state depuis le IRDevice.
self.cmdCode.setCmd(message['type'], message['state'])
self.sendDomogikXplUpdate({message['type']: message['state']})
else :
self._log.debug(u"DaikinRemote object not recipient of xpl-trig :{0}".format(message))
else :
self._log.debug(u"DaikinRemote object receiver unknown xpl-trig message : {0}".format(message))
class DaikinRemote():
"""Remote control type Daikin object"""
def __init__(self, manager, device, log):
"""Init remote control type daikin"""
self._manager = manager
self._device = device
self.cmdCode = CodeIRDaikin(self, self._device['name'])
self._log = log
self._currentAck = None
# On accède aux attributs uniquement depuis les property
getRemoteId = property(lambda self: getRemoteId(self._device))
getDomogikDevice = property(lambda self: self._getDomogikDevice())
getIRDevice = property(lambda self: self._getIRDevice())
def updateDevice(self, device):
"""Update device data."""
self._device = device
def _getDomogikDevice(self):
"""Return device Id for xPL domogik device"""
if self._device:
# try to find in xpl_commands
for a_cmd in self._device['xpl_commands']:
for a_param in self._device['xpl_commands'][a_cmd][
'parameters']:
if a_param['key'] == 'device': return a_param['value']
# try to find in xpl_stats
for a_stat in self._device['xpl_stats']:
for a_param in self._device['xpl_stats'][a_stat]['parameters'][
'static']:
if a_param['key'] == 'device': return a_param['value']
return None
else:
return None
def _getDatatype(self):
"""Return datatype for xPL domogik device"""
if self._device:
return self._device['parameters']["datatype"]['value']
else:
return None
def _getIRDevice(self):
"""Return IRDevice for IRTrans."""
if self._device: return self._device['parameters']["irdevice"]['value']
else: return ""
def sendToIRdevice(self):
"""Send xpl-cmnd to IRTrans Transmitter."""
# TODO : gérer les datatypes
data = {
"device": self._device['parameters']["irdevice"]['value'],
"command": "send",
"datatype": self._getDatatype()
}
if self._getDatatype() == "BinTimings":
data["code"] = self.cmdCode.encodeCmdIRTrans()
data["timing"] = self.cmdCode.timing.encodeTimingIRTrans()
self._manager._cb_send_xPL("xpl-cmnd", "irtrans.basic", data)
else:
self._log.info(
u"datatype : {0} not handled, xpl-cmnd to IR transmitter not send."
.format(self._getDatatype()))
def sendDomogikXplUpdate(self, item):
"""Send xpl-trig to domogik device."""
data = {"device": self.getDomogikDevice}
for cmd in item:
data.update({'type': cmd})
if cmd in [
'power', 'vertical-swing', 'horizontal-swing', 'powerfull',
'silent', 'home-leave', 'sensor'
]:
data.update({'state': item[cmd]})
elif cmd == 'setmode':
data.update({'mode': item[cmd]})
elif cmd == 'setpoint':
data.update({'temp': item[cmd]})
elif cmd == 'speedfan':
data.update({'speed': item[cmd]})
elif cmd in ['datetime', 'starttime', 'stoptime']:
data.update({'time': self.cmdCode.formatStrDelais(item[cmd])})
else:
data.update({cmd: item[cmd]})
self._manager._cb_send_xPL('xpl-trig', 'sensor.basic', data)
def udpateAllFromCode(self, code):
"""Update all sensors value from ir code and send xpl-trig."""
states = self.cmdCode.decodeCodeBin(code)
states["current"].update(states["toUpdate"])
for toUpd in states["current"]:
self.cmdCode.setCmd(toUpd, states["current"][toUpd])
self.sendDomogikXplUpdate({toUpd: states["current"][toUpd]})
self.cmdCode.isUpdate = True
def handle_xpl_cmd(self, xPLmessage):
"""Handle a xpl-cmnd message from hub"""
data = {'device': xPLmessage['device']}
if xPLmessage['command'] == 'switch':
if xPLmessage.has_key('power'): cmd = 'power'
elif xPLmessage.has_key('vertical-swing'): cmd = 'vertical-swing'
elif xPLmessage.has_key('horizontal-swing'):
cmd = 'horizontal-swing'
elif xPLmessage.has_key('powerfull'):
cmd = 'powerfull'
elif xPLmessage.has_key('silent'):
cmd = 'silent'
elif xPLmessage.has_key('home-leave'):
cmd = 'home-leave'
elif xPLmessage.has_key('sensor'):
cmd = 'sensor'
else:
self._log.debug(
u"DaikinRemote object, unknows xPL command : {0}".format(
xPLmessage))
return
if self.cmdCode.setCmd(cmd, xPLmessage[cmd]):
self.sendToIRdevice()
value = xPLmessage[cmd]
else:
value = self.cmdCode.getCmd(cmd)["value"]
data.update({'type': cmd, 'state': value})
elif xPLmessage['command'] == 'setpoint':
if self.cmdCode.setCmd("setpoint", int(xPLmessage['temp'])):
self.sendToIRdevice()
value = xPLmessage['temp']
else:
value = self.cmdCode.getCmd("setpoint")["option"]
data.update({'type': "setpoint", 'temp': value})
elif xPLmessage['command'] == 'setmode':
if self.cmdCode.setCmd("setmode", xPLmessage["mode"]):
self.sendToIRdevice()
value = xPLmessage['mode']
else:
value = self.cmdCode.getCmd("setmode")["value"]
data.update({'type': "setmode", 'mode': value})
elif xPLmessage['command'] == 'speedfan':
if self.cmdCode.setCmd("speedfan", xPLmessage["speed"]):
self.sendToIRdevice()
value = xPLmessage['speed']
else:
value = self.cmdCode.getCmd("speedfan")["value"]
data.update({'type': "speedfan", 'speed': value})
elif xPLmessage['command'] == 'settime':
if xPLmessage.has_key('starttime'): cmd = 'starttime'
elif xPLmessage.has_key('stoptime'): cmd = 'stoptime'
elif xPLmessage.has_key('datetime'):
cmd = 'datetime' # TODO : to handle in daikin codage rpi
self._log.debug(
u"DaikinRemote object, date time set not handled actually."
)
return
if self.cmdCode.setCmd(cmd, xPLmessage[cmd]):
self.sendToIRdevice()
value = xPLmessage[cmd]
else:
self._log.debug(
u"DaikinRemote object, unknows time definition in xPL command : {0}"
.format(xPLmessage))
value = self.cmdCode.getCmd(cmd)["option"]
data.update({'type': "time", 'time': value})
else:
self._log.debug(
u"DaikinRemote object, unknows xPL command : {0}".format(
xPLmessage))
return
# self._manager.sendXplAck(data)
self._currentAck = data
def handle_xpl_trig(self, message):
"""Handle a xpl-trig message from hub"""
if message.has_key('type'):
if message.has_key('device'):
if message['type'] == 'ack_ir_cmd' and message[
'device'] == self.getIRDevice:
if self._currentAck:
if message['result'] == 'ok':
self._manager.sendXplAck(self._currentAck)
else:
self._log.debug(
u"DaikinRemote object, Error on ack IRTrans message : {0}, Error : {1}"
.format(self._currentAck, message['result']))
self._currentAck = None
else:
self._log.debug(
u"DaikinRemote object, unknows xPL Ack trig : {0}".
format(message))
elif message['type'] == 'code_ir':
self._log.debug(
u"DaikinRemote object receiver an IR Code.")
if not self.cmdCode.isUpdate:
self.udpateAllFromCode(message['code'])
else:
states = self.cmdCode.decodeCodeBin(message['code'])
for toUpd in states["toUpdate"]:
self.cmdCode.setCmd(toUpd,
states["toUpdate"][toUpd])
self.sendDomogikXplUpdate(
{toUpd: states["toUpdate"][toUpd]})
elif message['type'] == 'power' and message[
'device'] == self.getIRDevice: # En cas de reception de state depuis le IRDevice.
self.cmdCode.setCmd(message['type'], message['state'])
self.sendDomogikXplUpdate(
{message['type']: message['state']})
else:
self._log.debug(
u"DaikinRemote object not recipient of xpl-trig :{0}".
format(message))
else:
self._log.debug(
u"DaikinRemote object receiver unknown xpl-trig message : {0}"
.format(message))
