def __init__(self):
""" Init plugin
"""
XplPlugin.__init__(self, name='velbus')
# register helpers
self.register_helper('scan', 'test help', 'scan')
# check if the plugin is configured. If not, this will stop the plugin and log an error
if not self.check_configured():
return
# get the config values
device_type = self.get_config("connection-type")
if device_type == None:
self.log.error('Devicetype is not configured, exitting')
print('Devicetype is not configured, exitting')
self.force_leave()
return
device = self.get_config("device")
#device = '192.168.1.101:3788'
if device == None:
self.log.error('Device is not configured, exitting')
print('Device is not configured, exitting')
self.force_leave()
return
# validate the config vars
if (device_type != 'serial') and (device_type != 'socket'):
self.log.error('Devicetype must be socket or serial, exitting')
print('Devicetype must be socket or serial, exitting')
self.force_leave()
return
if device_type == 'socket' and not re.match(
'[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}:[0-9]+', device):
self.log.error(
'A socket device is in the form of <ip>:<port>, exitting')
print('A socket device is in the form of <ip>:<port>, exitting')
self.force_leave()
return
# Init RFXCOM
self.manager = VelbusDev(self.log, self.send_xpl, self.send_trig,
self.get_stop())
self.add_stop_cb(self.manager.close)
# try opening
try:
self.manager.open(device, device_type)
except VelbusException as ex:
self.log.error(ex.value)
self.force_leave()
return
# Start reading thread
listenthread = threading.Thread(None, self.manager.listen,
"velbus-process-reader",
(self.get_stop(), ), {})
self.register_thread(listenthread)
listenthread.start()
# Create the xpl listeners
Listener(self.process_lighting_basic, self.myxpl, {
'xpltype': 'xpl-cmnd',
'schema': 'lighting.basic'
})
Listener(self.process_shutter_basic, self.myxpl, {
'xpltype': 'xpl-cmnd',
'schema': 'shutter.basic'
})
# start scanning the bus
self.manager.scan()
# notify ready
self.ready()
def __init__(self):
""" Init plugin
"""
XplPlugin.__init__(self, name='velbus')
# register helpers
self.register_helper('scan', 'test help', 'scan')
# check if the plugin is configured. If not, this will stop the plugin and log an error
if not self.check_configured():
return
# get the config values
device_type = self.get_config("connection-type")
if device_type == None:
self.log.error('Devicetype is not configured, exitting')
print('Devicetype is not configured, exitting')
self.force_leave()
return
device = self.get_config("device")
#device = '192.168.1.101:3788'
if device == None:
self.log.error('Device is not configured, exitting')
print('Device is not configured, exitting')
self.force_leave()
return
# validate the config vars
if (device_type != 'serial') and (device_type != 'socket'):
self.log.error('Devicetype must be socket or serial, exitting')
print('Devicetype must be socket or serial, exitting')
self.force_leave()
return
if device_type == 'socket' and not re.match('[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}:[0-9]+', device):
self.log.error('A socket device is in the form of <ip>:<port>, exitting')
print('A socket device is in the form of <ip>:<port>, exitting')
self.force_leave()
return
# Init RFXCOM
self.manager = VelbusDev(self.log, self.send_xpl,
self.send_trig, self.get_stop())
self.add_stop_cb(self.manager.close)
# try opening
try:
self.manager.open(device, device_type)
except VelbusException as ex:
self.log.error(ex.value)
self.force_leave()
return
# Start reading thread
listenthread = threading.Thread(None,
self.manager.listen,
"velbus-process-reader",
(self.get_stop(),),
{})
self.register_thread(listenthread)
listenthread.start()
# Create the xpl listeners
Listener(self.process_lighting_basic, self.myxpl,
{'xpltype': 'xpl-cmnd', 'schema': 'lighting.basic'})
Listener(self.process_shutter_basic, self.myxpl,
{'xpltype': 'xpl-cmnd', 'schema': 'shutter.basic'})
# start scanning the bus
self.manager.scan()
# notify ready
self.ready()
class VelbusManager(XplPlugin):
"""
Managages the velbus domogik plugin
"""
def __init__(self):
""" Init plugin
"""
XplPlugin.__init__(self, name='velbus')
# register helpers
self.register_helper('scan', 'test help', 'scan')
# check if the plugin is configured. If not, this will stop the plugin and log an error
if not self.check_configured():
return
# get the config values
device_type = self.get_config("connection-type")
if device_type == None:
self.log.error('Devicetype is not configured, exitting')
print('Devicetype is not configured, exitting')
self.force_leave()
return
device = self.get_config("device")
#device = '192.168.1.101:3788'
if device == None:
self.log.error('Device is not configured, exitting')
print('Device is not configured, exitting')
self.force_leave()
return
# validate the config vars
if (device_type != 'serial') and (device_type != 'socket'):
self.log.error('Devicetype must be socket or serial, exitting')
print('Devicetype must be socket or serial, exitting')
self.force_leave()
return
if device_type == 'socket' and not re.match(
'[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}:[0-9]+', device):
self.log.error(
'A socket device is in the form of <ip>:<port>, exitting')
print('A socket device is in the form of <ip>:<port>, exitting')
self.force_leave()
return
# Init RFXCOM
self.manager = VelbusDev(self.log, self.send_xpl, self.send_trig,
self.get_stop())
self.add_stop_cb(self.manager.close)
# try opening
try:
self.manager.open(device, device_type)
except VelbusException as ex:
self.log.error(ex.value)
self.force_leave()
return
# Start reading thread
listenthread = threading.Thread(None, self.manager.listen,
"velbus-process-reader",
(self.get_stop(), ), {})
self.register_thread(listenthread)
listenthread.start()
# Create the xpl listeners
Listener(self.process_lighting_basic, self.myxpl, {
'xpltype': 'xpl-cmnd',
'schema': 'lighting.basic'
})
Listener(self.process_shutter_basic, self.myxpl, {
'xpltype': 'xpl-cmnd',
'schema': 'shutter.basic'
})
# start scanning the bus
self.manager.scan()
# notify ready
self.ready()
def scan(self, test1, test2):
return "{0}-{1}".format(test1, test2)
def send_xpl(self, schema, data):
""" Send xPL message on network
"""
self.log.info("schema:%s, data:%s" % (schema, data))
msg = XplMessage()
msg.set_type("xpl-trig")
msg.set_schema(schema)
for key in data:
msg.add_data({key: data[key]})
self.myxpl.send(msg)
def send_trig(self, message):
""" Send xpl-trig given message
@param message : xpl-trig message
"""
self.myxpl.send(message)
def process_lighting_basic(self, message):
""" Process xpl chema lightning.basic
"""
print message
#self.send_xpl("lighting.device", message.data)
device = message.data['device']
chan = message.data['channel']
if message.data["level"] == 'None':
message.data["level"] = 0
self.manager.send_level(device, chan, message.data["level"])
def process_shutter_basic(self, message):
""" Process xpl chema shutter.basic
"""
self.send_xpl("shutter.device", message.data)
add = message.data['device'].split('-')
chan = int(add[1])
address = add[0]
if message.data["command"] == "up":
self.log.debug("set shutter up")
self.manager.send_shutterup(address, chan)
elif message.data["command"] == "down":
self.log.debug("set shutter down")
self.manager.send_shutterdown(address, chan)
else:
self.log.debug("Unknown command in shutter.basic message")
class VelbusManager(XplPlugin):
"""
Managages the velbus domogik plugin
"""
def __init__(self):
""" Init plugin
"""
XplPlugin.__init__(self, name='velbus')
# register helpers
self.register_helper('scan', 'test help', 'scan')
# check if the plugin is configured. If not, this will stop the plugin and log an error
if not self.check_configured():
return
# get the config values
device_type = self.get_config("connection-type")
if device_type == None:
self.log.error('Devicetype is not configured, exitting')
print('Devicetype is not configured, exitting')
self.force_leave()
return
device = self.get_config("device")
#device = '192.168.1.101:3788'
if device == None:
self.log.error('Device is not configured, exitting')
print('Device is not configured, exitting')
self.force_leave()
return
# validate the config vars
if (device_type != 'serial') and (device_type != 'socket'):
self.log.error('Devicetype must be socket or serial, exitting')
print('Devicetype must be socket or serial, exitting')
self.force_leave()
return
if device_type == 'socket' and not re.match('[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}.[0-9]{1,3}:[0-9]+', device):
self.log.error('A socket device is in the form of <ip>:<port>, exitting')
print('A socket device is in the form of <ip>:<port>, exitting')
self.force_leave()
return
# Init RFXCOM
self.manager = VelbusDev(self.log, self.send_xpl,
self.send_trig, self.get_stop())
self.add_stop_cb(self.manager.close)
# try opening
try:
self.manager.open(device, device_type)
except VelbusException as ex:
self.log.error(ex.value)
self.force_leave()
return
# Start reading thread
listenthread = threading.Thread(None,
self.manager.listen,
"velbus-process-reader",
(self.get_stop(),),
{})
self.register_thread(listenthread)
listenthread.start()
# Create the xpl listeners
Listener(self.process_lighting_basic, self.myxpl,
{'xpltype': 'xpl-cmnd', 'schema': 'lighting.basic'})
Listener(self.process_shutter_basic, self.myxpl,
{'xpltype': 'xpl-cmnd', 'schema': 'shutter.basic'})
# start scanning the bus
self.manager.scan()
# notify ready
self.ready()
def scan(self, test1, test2):
return "{0}-{1}".format(test1, test2)
def send_xpl(self, schema, data):
""" Send xPL message on network
"""
self.log.info("schema:%s, data:%s" % (schema, data))
msg = XplMessage()
msg.set_type("xpl-trig")
msg.set_schema(schema)
for key in data:
msg.add_data({key : data[key]})
self.myxpl.send(msg)
def send_trig(self, message):
""" Send xpl-trig given message
@param message : xpl-trig message
"""
self.myxpl.send(message)
def process_lighting_basic(self, message):
""" Process xpl chema lightning.basic
"""
print message
#self.send_xpl("lighting.device", message.data)
device = message.data['device']
chan = message.data['channel']
if message.data["level"] == 'None':
message.data["level"] = 0
self.manager.send_level( device, chan, message.data["level"])
def process_shutter_basic(self, message):
""" Process xpl chema shutter.basic
"""
self.send_xpl("shutter.device", message.data)
add = message.data['device'].split('-')
chan = int(add[1])
address = add[0]
if message.data["command"] == "up":
self.log.debug("set shutter up")
self.manager.send_shutterup( address, chan )
elif message.data["command"] == "down":
self.log.debug("set shutter down")
self.manager.send_shutterdown( address, chan )
else:
self.log.debug("Unknown command in shutter.basic message")