def simple_mesh(meshname='default_mesh', region='default_region', material='Si',
top='top', bottom='bottom', thickness=10, spacing=0.1):
"""
Creates a simple 1D mesh made of Si with metal contacts
:param meshname:
:param region:
:param material:
:param top:
:param bottom:
:param thickness: in nm, specify the thickness of the resistor
:param spacing:
:return:
"""
thickness = thickness * 1E-4
spacing = spacing * 1E-4 # convert nm to cm
ds.create_1d_mesh(mesh=meshname)
ds.add_1d_mesh_line(mesh=meshname, pos=0, ps=spacing, tag=top)
ds.add_1d_mesh_line(mesh=meshname, pos=thickness, ps=spacing, tag=bottom)
ds.add_1d_region(mesh=meshname, tag1=top, tag2=bottom, region=region, material=material)
ds.add_1d_contact(material='metal', mesh=meshname, name=f"{top}_contact", tag=top)
ds.add_1d_contact(material='metal', mesh=meshname, name=f"{bottom}_contact", tag=bottom)
ds.finalize_mesh(mesh=meshname)
return meshname, region, top, bottom
def add_contact(self, name, tag, material):
"""
Add a contact to this mesh
name: a name for this contact
tag: a tag for ...?
material: The material for the contact ...???
"""
add_1d_contact(mesh=self.name,
name=name,
tag=tag,
material=str(material))
self.contacts.append(name)
def CreateMesh2(device, region):
create_1d_mesh(mesh="dio")
add_1d_mesh_line(mesh="dio", pos=0, ps=1e-7, tag="top")
add_1d_mesh_line(mesh="dio", pos=0.5e-5, ps=1e-8, tag="mid")
add_1d_mesh_line(mesh="dio", pos=1e-5, ps=1e-7, tag="bot")
add_1d_contact(mesh="dio", name="top", tag="top", material="metal")
add_1d_contact(mesh="dio", name="bot", tag="bot", material="metal")
add_1d_region(mesh="dio",
material="Si",
region=region,
tag1="top",
tag2="bot")
finalize_mesh(mesh="dio")
create_device(mesh="dio", device=device)
def p_n_junction(meshname='default_mesh', region1='p_region', region2='n_region', material1='CdS', material2='CdTe', thickness1=0.2, thickness2=2, spacing=0.05, top='top', interface='interface', bottom='bottom'):
thickness1 = thickness1 * 1E-4
thickness2 = thickness2 * 1E-4
spacing = spacing * 1E-4 # convert nm to cm
ds.create_1d_mesh(mesh=meshname)
ds.add_1d_mesh_line(mesh=meshname, pos=0, ps=spacing/10, tag=top)
ds.add_1d_mesh_line(mesh=meshname, pos=thickness1, ps=spacing/50, tag=interface)
ds.add_1d_region(mesh=meshname, tag1=top, tag2=interface, region=region1, material='Si')
ds.add_1d_mesh_line(mesh=meshname, pos=thickness1+thickness2, ps=spacing, tag=bottom)
ds.add_1d_region(mesh=meshname, tag1=interface, tag2=bottom, region=region2, material='InAs')
ds.add_1d_contact(material='metal', mesh=meshname, name=f"{top}_contact", tag=top)
ds.add_1d_contact(material='metal', mesh=meshname, name=f"{bottom}_contact", tag=bottom)
ds.add_1d_interface(mesh=meshname, tag=interface, name=interface)
ds.finalize_mesh(mesh=meshname)
return meshname
def CreateMesh(device, region, meshname='diode'):
'''
Meshing
'''
create_1d_mesh(mesh=meshname)
add_1d_mesh_line(mesh=meshname, pos=0, ps=1e-7, tag="top")
add_1d_mesh_line(mesh=meshname, pos=0.5e-5, ps=1e-9, tag="mid")
add_1d_mesh_line(mesh=meshname, pos=1e-5, ps=1e-7, tag="bot")
add_1d_contact(mesh=meshname, name="top", tag="top", material="metal")
add_1d_contact(mesh=meshname, name="bot", tag="bot", material="metal")
add_1d_region(mesh=meshname,
material="Si",
region=region,
tag1="top",
tag2="bot")
finalize_mesh(mesh=meshname)
create_device(mesh=meshname, device=device)
# n1
top_tag = f"top_{CdS_region}"
interface_tag = f"bot_{CdS_region}"
bottom_tag = f"bot_{CdTe_region}"
ds.add_1d_mesh_line(mesh=meshname, pos=0, ps=spacing, tag=top_tag)
# add_1d_mesh_line(mesh=meshname, pos=n1_thick/2, ps=spacing, tag="mid_n1")
ds.add_1d_mesh_line(mesh=meshname,
pos=CdS_thickness,
ps=spacing,
tag=interface_tag)
ds.add_1d_region(mesh=meshname,
material="CdS",
region=CdS_region,
tag1=top_tag,
tag2=interface_tag)
ds.add_1d_contact(mesh=meshname, name=top_tag, tag=top_tag, material="metal")
# b
# add_1d_mesh_line(mesh=meshname, pos=n1_thick, ps=spacing, tag="top_b")
ds.add_1d_mesh_line(mesh=meshname,
pos=CdS_thickness + CdTe_thickness,
ps=spacing,
tag=bottom_tag)
ds.add_1d_region(mesh=meshname,
material="CdTe",
region=CdTe_region,
tag1=interface_tag,
tag2=bottom_tag)
ds.add_1d_interface(mesh=meshname,
tag=interface_tag,
name=f"{CdS_region}_to_{CdTe_region}_interface")
ds.add_1d_contact(material='metal',
else:
CreateSiliconDriftDiffusionAtContact(device, region, i)
#---- Start ----
device = "MyDevice"
region = "MyRegion"
# Make a mesh for this device and region
# CreateMesh(device=device, region=region)
meshname = 'diode'
create_1d_mesh(mesh=meshname)
add_1d_mesh_line(mesh=meshname, pos=0, ps=1e-7, tag="top")
add_1d_mesh_line(mesh=meshname, pos=0.5e-5, ps=1e-9, tag="mid")
add_1d_mesh_line(mesh=meshname, pos=1e-5, ps=1e-7, tag="bot")
add_1d_contact(mesh=meshname, name="top", tag="top", material="metal")
add_1d_contact(mesh=meshname, name="bot", tag="bot", material="metal")
add_1d_region(mesh=meshname,
material="Si",
region=region,
tag1="top",
tag2="bot")
finalize_mesh(mesh=meshname)
create_device(mesh=meshname, device=device)
SetSiliconParameters(device, region, 300)
set_parameter(device=device, region=region, name="taun", value=1e-8)
set_parameter(device=device, region=region, name="taup", value=1e-8)
# SetNetDoping(device=device, region=region)
CreateNodeModel(device, region, "Acceptors", "1.0e18*step(0.5e-5-x)")
CreateNodeModel(device, region, "Donors", "1.0e18*step(x-0.5e-5)")
def __init__(self,
regions,
mesh=Mesh1D(),
interfaces=None,
contacts=None,
environment=Environment(),
R_series=0,
**kwargs):
"""
Creates a 1D device
This constructor is responsbile for:
Creating the mesh
* Adding the meshlines from the Region objects inside of regions
* Adding interfaces between the Regions
* Upading the Region objects interfaces as needed
* Creating the contacts as specified by giving a list of two Regions
:param regions: List of Region objects which create this 1D device. Order matters and is from top to bottom
:param interfaces: List of interfaces for this device. Does not include top and bottom contacts.
Should be N-1 regions, default is no special interfaces at all
:param contacts: List of Tag name of the contacts for this device. Default is one at top and one at bottom
:param environment: Local environment of the measurement. Default is 25C, no B field, 50% humidity, STP
:param kwargs: Other kwargs for base class
"""
super().__init__(regions, **kwargs)
self.mesh = mesh
if interfaces is None:
interfaces = [None for _ in regions]
interfaces.pop(
) # Should be 1 less interface than the number of materials.
self.interfaces = interfaces
if contacts is None:
contacts = self.regions[0].mesh_data[0]['tag'], self.regions[
-1].mesh_data[-1]['tag']
self.contacts = contacts
self.environment = environment
# Setup our regions
for region in regions:
logger.debug(
f"Now adding region {region.name} to the new mesh for this device"
)
for mesh_info in region.mesh_data:
self.mesh.add_line(**mesh_info)
logger.info(f"Added mesh: {mesh_info['tag']}")
add_1d_region(mesh=self.mesh.name,
material=region.material.name,
region=region.name,
tag1=region.mesh_data[0]['tag'],
tag2=region.mesh_data[-1]['tag'])
for contact in contacts:
logger.debug(f"Adding 1D contacts for {contact}")
add_1d_contact(mesh=self.mesh.name,
name=contact,
tag=contact,
material='metal')
# TODO support contacts not ideal metals! Maybe make Contact an object? thats silly perhaps. Dict?
self.mesh.finalize()
logger.info(
f"Creating device {self.name} associated with mesh {self.mesh.name}"
)
create_device(mesh=self.mesh.name, device=self.name)
self.setup_drift_diffusion()
b_band_gap = 1.636 # eV
# Devsim requires you create the entire mesh first include interfaces before specifying regions
# Create mesh
ds.create_1d_mesh(mesh=meshname)
# n1
ds.add_1d_mesh_line(mesh=meshname, pos=0, ps=spacing, tag="top_n1")
# add_1d_mesh_line(mesh=meshname, pos=n1_thick/2, ps=spacing, tag="mid_n1")
ds.add_1d_mesh_line(mesh=meshname, pos=n1_thick, ps=spacing, tag="bot_n1")
ds.add_1d_region(mesh=meshname,
material="InAs",
region=n1_region,
tag1="top_n1",
tag2="bot_n1")
ds.add_1d_contact(mesh=meshname, name="top_n1", tag="top_n1", material="metal")
# b
# add_1d_mesh_line(mesh=meshname, pos=n1_thick, ps=spacing, tag="top_b")
ds.add_1d_mesh_line(mesh=meshname,
pos=n1_thick + (b_thick / 2),
ps=spacing,
tag="mid_b")
ds.add_1d_mesh_line(mesh=meshname,
pos=n1_thick + b_thick,
ps=spacing,
tag="bot_b")
ds.add_1d_region(mesh=meshname,
material="InAs",
region=b_region,
tag1="bot_n1",
tag2="bot_b")