def parse_conffile_overrideables(self):
"""
globals like entries in 'wiki' or 'output' that can
be overriden by a specific named section
"""
self.db_list_unsorted = MiscUtils.db_list(self.get_opt_in_overrides_or_default(
"wiki", "dblist", 0), nosort=True)
# permit comma-separated list of files so that eg some script
# can skip all private and/or closed wikis in addition to some
# other exclusion list
to_skip = self.get_opt_in_overrides_or_default("wiki", "skipdblist", 0)
self.skip_db_list = self.get_skipdbs(to_skip)
try:
self.private_list = MiscUtils.db_list(self.get_opt_in_overrides_or_default(
"wiki", "privatelist", 0))
except FileNotFoundError:
self.private_list = []
try:
self.closed_list = MiscUtils.db_list(self.get_opt_in_overrides_or_default(
"wiki", "closedlist", 0))
except FileNotFoundError:
self.closed_list = []
try:
self.flow_list = MiscUtils.db_list(self.get_opt_in_overrides_or_default(
"wiki", "flowlist", 0))
except FileNotFoundError:
self.flow_list = []
self.tablejobs = self.get_opt_in_overrides_or_default(
"wiki", "tablejobs", 0)
self.apijobs = self.get_opt_in_overrides_or_default(
"wiki", "apijobs", 0)
self.db_list_unsorted = [dbname for dbname in self.db_list_unsorted
if dbname not in self.skip_db_list]
self.db_list = sorted(self.db_list_unsorted)
if not self.conf.has_section('output'):
self.conf.add_section('output')
self.public_dir = self.get_opt_in_overrides_or_default("output", "public", 0)
self.private_dir = self.get_opt_in_overrides_or_default("output", "private", 0)
self.temp_dir = self.get_opt_in_overrides_or_default("output", "temp", 0)
self.web_root = self.get_opt_in_overrides_or_default("output", "webroot", 0)
self.index = self.get_opt_in_overrides_or_default("output", "index", 0)
self.template_dir = self.get_opt_in_overrides_or_default("output", "templatedir", 0)
self.perdump_index = self.get_opt_in_overrides_or_default("output", "perdumpindex", 0)
self.log_file = self.get_opt_in_overrides_or_default("output", "logfile", 0)
self.fileperms = self.get_opt_in_overrides_or_default("output", "fileperms", 0)
self.fileperms = int(self.fileperms, 0)
if not self.conf.has_section('misc'):
self.conf.add_section('misc')
self.fixed_dump_order = self.get_opt_in_overrides_or_default("misc", "fixeddumporder", 0)
self.fixed_dump_order = int(self.fixed_dump_order, 0)
def get_db_user_and_password(self):
# get these by running a MediaWiki maintenance script;
# yes, this means you need a full installation of MediaWiki
# (but not web service) in order to use these methods
command_list = MultiVersion.mw_script_as_array(self.config, "getConfiguration.php")
pull_vars = ["wgDBuser", "wgDBpassword"]
command = "{php} {command} --wiki={dbname} --format=json --regex='{vars}'"
command = command.format(
php=MiscUtils.shell_escape(self.config.php),
command=" ".join(command_list),
dbname=MiscUtils.shell_escape(self.db_name),
vars="|".join(pull_vars))
results = RunSimpleCommand.run_with_output(command, shell=True).strip()
settings = json.loads(results.decode('utf-8'))
db_user = settings['wgDBuser']
db_password = settings['wgDBpassword']
return db_user, db_password
def get_skipdbs(self, filenames):
"""
permit comma-separated list of files so that eg some script
can skip all private and/or closed wikis in addition to some
other exclusion list
"""
if ',' in filenames:
skipfiles = filenames.split(',')
else:
skipfiles = [filenames]
skip_db_list = []
for skipfile in skipfiles:
skip_db_list.extend(MiscUtils.db_list(skipfile))
return list(set(skip_db_list))
def get_last_lines_from_n(self, fileobj, runner, count):
if not fileobj.filename or not exists(runner.dump_dir.filename_public_path(fileobj)):
return None
dumpfile = DumpFile(self.wiki,
runner.dump_dir.filename_public_path(fileobj, self.wiki.date),
fileobj, self.verbose)
pipeline = dumpfile.setup_uncompression_command()
tail = self.wiki.config.tail
if not exists(tail):
raise BackupError("tail command %s not found" % tail)
tail_esc = MiscUtils.shell_escape(tail)
pipeline.append([tail, "-n", "+%s" % count])
# without shell
proc = CommandPipeline(pipeline, quiet=True)
proc.run_pipeline_get_output()
if (proc.exited_successfully() or
(proc.get_failed_cmds_with_retcode() ==
[[-signal.SIGPIPE, pipeline[0]]]) or
(proc.get_failed_cmds_with_retcode() ==
[[signal.SIGPIPE + 128, pipeline[0]]])):
last_lines = proc.output()
return last_lines
def get_first_500_lines(self):
if self.first_lines:
return self.first_lines
if not self.filename or not exists(self.filename):
return None
pipeline = self.setup_uncompression_command()
if not exists(self._wiki.config.head):
raise BackupError("head command %s not found" % self._wiki.config.head)
head = self._wiki.config.head
head_esc = MiscUtils.shell_escape(head)
pipeline.append([head, "-500"])
# without shell
proc = CommandPipeline(pipeline, quiet=True)
proc.run_pipeline_get_output()
if (proc.exited_successfully() or
(proc.get_failed_cmds_with_retcode() ==
[[-signal.SIGPIPE, pipeline[0]]]) or
(proc.get_failed_cmds_with_retcode() ==
[[signal.SIGPIPE + 128, pipeline[0]]])):
self.first_lines = proc.output()
return self.first_lines
def build_recombine_command_string(self, runner, files, output_file, compression_command,
uncompression_command, end_header_marker="</siteinfo>"):
output_filename = runner.dump_dir.filename_public_path(output_file)
partnum = 0
recombines = []
if not exists(runner.wiki.config.head):
raise BackupError("head command %s not found" % runner.wiki.config.head)
head = runner.wiki.config.head
if not exists(runner.wiki.config.tail):
raise BackupError("tail command %s not found" % runner.wiki.config.tail)
tail = runner.wiki.config.tail
if not exists(runner.wiki.config.grep):
raise BackupError("grep command %s not found" % runner.wiki.config.grep)
grep = runner.wiki.config.grep
# we assume the result is always going to be run in a subshell.
# much quicker than this script trying to read output
# and pass it to a subprocess
output_filename_esc = MiscUtils.shell_escape(output_filename)
head_esc = MiscUtils.shell_escape(head)
tail_esc = MiscUtils.shell_escape(tail)
grep_esc = MiscUtils.shell_escape(grep)
uncompression_command_esc = uncompression_command[:]
for command in uncompression_command_esc:
command = MiscUtils.shell_escape(command)
for command in compression_command:
command = MiscUtils.shell_escape(command)
if not files:
raise BackupError("No files for the recombine step found in %s." % self.name())
for file_obj in files:
# uh oh FIXME
# f = MiscUtils.shell_escape(file_obj.filename)
fpath = runner.dump_dir.filename_public_path(file_obj)
partnum = partnum + 1
pipeline = []
uncompress_this_file = uncompression_command[:]
uncompress_this_file.append(fpath)
pipeline.append(uncompress_this_file)
# warning: we figure any header (<siteinfo>...</siteinfo>)
# is going to be less than 2000 lines!
pipeline.append([head, "-2000"])
pipeline.append([grep, "-n", end_header_marker])
# without shell
proc = CommandPipeline(pipeline, quiet=True)
proc.run_pipeline_get_output()
if ((proc.output()) and
(proc.exited_successfully() or
proc.get_failed_cmds_with_retcode() ==
[[-signal.SIGPIPE, uncompress_this_file]] or
proc.get_failed_cmds_with_retcode() ==
[[signal.SIGPIPE + 128, uncompress_this_file]])):
(header_end_num, junk_unused) = proc.output().split(":", 1)
# get header_end_num
else:
raise BackupError("Could not find 'end of header' marker for %s" % fpath)
recombine = " ".join(uncompress_this_file)
header_end_num = int(header_end_num) + 1
if partnum == 1:
# first file, put header and contents
recombine = recombine + " | %s -n -1 " % head
elif partnum == len(files):
# last file, put footer
recombine = recombine + (" | %s -n +%s" % (tail, header_end_num))
else:
# put contents only
recombine = recombine + (" | %s -n +%s" % (tail, header_end_num))
recombine = recombine + " | %s -n -1 " % head
recombines.append(recombine)
recombine_command_string = ("(" + ";".join(recombines) + ")" + "|" +
"%s %s" % (compression_command, output_filename))
return recombine_command_string
def parse_conffile_globally(self):
self.db_list = MiscUtils.db_list(self.conf.get("wiki", "dblist"))
# permit comma-separated list of files so that eg some script
# can skip all private and/or closed wikis in addition to some
# other exclusion list
to_skip = self.conf.get("wiki", "skipdblist")
if ',' in to_skip:
skipfiles = to_skip.split(',')
else:
skipfiles = [to_skip]
self.skip_db_list = []
for skipfile in skipfiles:
self.skip_db_list.extend(MiscUtils.db_list(skipfile))
self.skip_db_list = list(set(self.skip_db_list))
self.private_list = MiscUtils.db_list(self.conf.get("wiki", "privatelist"))
self.closed_list = MiscUtils.db_list(self.conf.get("wiki", "closedlist"))
self.flow_list = MiscUtils.db_list(self.conf.get("wiki", "flowlist"))
self.tablejobs = self.conf.get("wiki", "tablejobs")
self.db_list = list(set(self.db_list) - set(self.skip_db_list))
if not self.conf.has_section('database'):
self.conf.add_section('database')
self.max_allowed_packet = self.conf.get("database", "max_allowed_packet")
if not self.conf.has_section('output'):
self.conf.add_section('output')
self.public_dir = self.conf.get("output", "public")
self.private_dir = self.conf.get("output", "private")
self.temp_dir = self.conf.get("output", "temp")
self.web_root = self.conf.get("output", "webroot")
self.index = self.conf.get("output", "index")
self.template_dir = self.conf.get("output", "templatedir")
self.perdump_index = self.conf.get("output", "perdumpindex")
self.log_file = self.conf.get("output", "logfile")
self.fileperms = self.conf.get("output", "fileperms")
self.fileperms = int(self.fileperms, 0)
if not self.conf.has_section('reporting'):
self.conf.add_section('reporting')
self.admin_mail = self.conf.get("reporting", "adminmail")
self.mail_from = self.conf.get("reporting", "mailfrom")
self.smtp_server = self.conf.get("reporting", "smtpserver")
self.stale_age = self.conf.getint("reporting", "staleage")
self.skip_privatetables = self.conf.getint("reporting", "skipprivatetables")
if not self.conf.has_section('tools'):
self.conf.add_section('tools')
self.php = self.conf.get("tools", "php")
self.gzip = self.conf.get("tools", "gzip")
self.bzip2 = self.conf.get("tools", "bzip2")
self.sevenzip = self.conf.get("tools", "sevenzip")
self.mysql = self.conf.get("tools", "mysql")
self.mysqldump = self.conf.get("tools", "mysqldump")
self.head = self.conf.get("tools", "head")
self.tail = self.conf.get("tools", "tail")
self.cat = self.conf.get("tools", "cat")
self.grep = self.conf.get("tools", "grep")
self.checkforbz2footer = self.conf.get("tools", "checkforbz2footer")
self.writeuptopageid = self.conf.get("tools", "writeuptopageid")
self.recompressxml = self.conf.get("tools", "recompressxml")
if not self.conf.has_section('cleanup'):
self.conf.add_section('cleanup')
self.keep = self.conf.getint("cleanup", "keep")
if not self.conf.has_section('query'):
self.conf.add_section('query')
self.queryfile = self.conf.get("query", "queryfile")
