def f(method):
loops = [wizard.loop] # We do it this way so as to pop the loop when it's done. This avoids possible multiple calls to loop.exit from different code paths.
handler._loops = loops # hack to prevent trezor transport errors from stalling the UI here. see clientbase.py button_request which aborts the wizard event loop on transport error
try:
import threading
settings = self.request_trezor_init_settings(wizard, method, model)
# We do this popup business here because doing it in the
# thread interferes with whatever other popups may happen
# from trezorlib. So we do this all-stop popup first if needed.
self._chk_settings_do_popup_maybe(handler, method, model, settings)
errors = []
t = threading.Thread(target=self._initialize_device_safe, args=(settings, method, device_id, loops, errors))
t.setDaemon(True)
t.start()
exit_code = wizard.loop.exec_()
loops.pop()
if exit_code != 0:
if errors and isinstance(errors[0], BaseException):
msg = str(errors[0]).strip()
if msg:
# we do this here in the main thread so as to give
# the user the opportunity to actually *see* the error
# window before the wizard "goes back"
handler.show_error(msg)
# this method (initialize_device) was called with the expectation
# of leaving the device in an initialized state when finishing.
# signal that this is not the case:
raise UserCancelled()
finally:
delattr(handler, '_loops') # /clean up hack
def callback_Failure(self, msg):
# BaseClient's unfortunate call() implementation forces us to
# raise exceptions on failure in order to unwind the stack.
# However, making the user acknowledge they cancelled
# gets old very quickly, so we suppress those. The NotInitialized
# one is misnamed and indicates a passphrase request was cancelled.
if msg.code in (self.types.Failure_PinCancelled,
self.types.Failure_ActionCancelled,
self.types.Failure_NotInitialized):
raise UserCancelled()
raise RuntimeError(msg.message)
def f(method):
import threading
settings = self.request_trezor_init_settings(wizard, method, self.device)
t = threading.Thread(target=self._initialize_device_safe, args=(settings, method, device_id, wizard, handler))
t.setDaemon(True)
t.start()
exit_code = wizard.loop.exec_()
if exit_code != 0:
# this method (initialize_device) was called with the expectation
# of leaving the device in an initialized state when finishing.
# signal that this is not the case:
raise UserCancelled()
def run_upgrades(self, storage):
path = storage.path
if storage.requires_split():
self.hide()
msg = _("The wallet '{}' contains multiple accounts, which are no longer supported since Electrum 2.7.\n\n"
"Do you want to split your wallet into multiple files?").format(path)
if not self.question(msg):
return
file_list = '\n'.join(storage.split_accounts())
msg = _('Your accounts have been moved to') + ':\n' + file_list + '\n\n'+ _('Do you want to delete the old file') + ':\n' + path
if self.question(msg):
os.remove(path)
self.show_warning(_('The file was removed'))
# raise now, to avoid having the old storage opened
raise UserCancelled()
action = storage.get_action()
if action and storage.requires_upgrade():
raise WalletFileException('Incomplete wallet files cannot be upgraded.')
if action:
self.hide()
msg = _("The file '{}' contains an incompletely created wallet.\n"
"Do you want to complete its creation now?").format(path)
if not self.question(msg):
if self.question(_("Do you want to delete '{}'?").format(path)):
os.remove(path)
self.show_warning(_('The file was removed'))
return
self.show()
self.data = storage.db.data
self.run(action)
for k, v in self.data.items():
storage.put(k, v)
storage.write()
return
if storage.requires_upgrade():
self.upgrade_storage(storage)
def sign_transaction(self, tx, password):
if tx.is_complete():
return
try:
p2pkhTransaction = True
derivations = self.get_tx_derivations(tx)
inputhasharray = []
hasharray = []
pubkeyarray = []
# Build hasharray from inputs
for i, txin in enumerate(tx.inputs()):
if txin['type'] == 'coinbase':
self.give_error("Coinbase not supported") # should never happen
if txin['type'] != 'p2pkh':
p2pkhTransaction = False
for x_pubkey in txin['x_pubkeys']:
if x_pubkey in derivations:
index = derivations.get(x_pubkey)
inputPath = "%s/%d/%d" % (self.get_derivation(), index[0], index[1])
inputHash = Hash(binascii.unhexlify(tx.serialize_preimage(i)))
hasharray_i = {'hash': to_hexstr(inputHash), 'keypath': inputPath}
hasharray.append(hasharray_i)
inputhasharray.append(inputHash)
break
else:
self.give_error("No matching x_key for sign_transaction") # should never happen
# Build pubkeyarray from outputs
for _type, address, amount in tx.outputs():
if not _type == TYPE_ADDRESS:
self.give_error(_("Only address outputs are supported by {}").format(self.name))
info = tx.output_info.get(address)
if info is not None:
index, xpubs, m, script_type = info
changePath = self.get_derivation() + "/%d/%d" % index
changePubkey = self.derive_pubkey(index[0], index[1])
pubkeyarray_i = {'pubkey': changePubkey, 'keypath': changePath}
pubkeyarray.append(pubkeyarray_i)
# Special serialization of the unsigned transaction for
# the mobile verification app.
# At the moment, verification only works for p2pkh transactions.
if p2pkhTransaction:
class CustomTXSerialization(Transaction):
@classmethod
def input_script(self, txin, estimate_size=False, sign_schnorr=False):
if txin['type'] == 'p2pkh':
return Transaction.get_preimage_script(txin)
if txin['type'] == 'p2sh':
# Multisig verification has partial support, but is disabled. This is the
# expected serialization though, so we leave it here until we activate it.
return '00' + push_script(Transaction.get_preimage_script(txin))
raise Exception("unsupported type %s" % txin['type'])
tx_dbb_serialized = CustomTXSerialization(tx.serialize()).serialize()
else:
# We only need this for the signing echo / verification.
tx_dbb_serialized = None
# Build sign command
dbb_signatures = []
steps = math.ceil(1.0 * len(hasharray) / self.maxInputs)
for step in range(int(steps)):
hashes = hasharray[step * self.maxInputs : (step + 1) * self.maxInputs]
msg = {
"sign": {
"data": hashes,
"checkpub": pubkeyarray,
},
}
if tx_dbb_serialized is not None:
msg["sign"]["meta"] = to_hexstr(Hash(tx_dbb_serialized))
msg = json.dumps(msg).encode('ascii')
dbb_client = self.plugin.get_client(self)
if not dbb_client.is_paired():
raise Exception("Could not sign transaction.")
reply = dbb_client.hid_send_encrypt(msg)
if 'error' in reply:
raise Exception(reply['error']['message'])
if 'echo' not in reply:
raise Exception("Could not sign transaction.")
if self.plugin.is_mobile_paired() and tx_dbb_serialized is not None:
reply['tx'] = tx_dbb_serialized
self.plugin.comserver_post_notification(reply)
if steps > 1:
self.handler.show_message(_("Signing large transaction. Please be patient ...") + "\n\n" +
_("To continue, touch the Digital Bitbox's blinking light for 3 seconds.") + " " +
_("(Touch {} of {})").format((step + 1), steps) + "\n\n" +
_("To cancel, briefly touch the blinking light or wait for the timeout.") + "\n\n")
else:
self.handler.show_message(_("Signing transaction...") + "\n\n" +
_("To continue, touch the Digital Bitbox's blinking light for 3 seconds.") + "\n\n" +
_("To cancel, briefly touch the blinking light or wait for the timeout."))
# Send twice, first returns an echo for smart verification
reply = dbb_client.hid_send_encrypt(msg)
self.handler.finished()
if 'error' in reply:
if reply["error"].get('code') in (600, 601):
# aborted via LED short touch or timeout
raise UserCancelled()
raise Exception(reply['error']['message'])
if 'sign' not in reply:
raise Exception("Could not sign transaction.")
dbb_signatures.extend(reply['sign'])
# Fill signatures
if len(dbb_signatures) != len(tx.inputs()):
raise Exception("Incorrect number of transactions signed.") # Should never occur
for i, txin in enumerate(tx.inputs()):
num = txin['num_sig']
for pubkey in txin['pubkeys']:
signatures = list(filter(None, txin['signatures']))
if len(signatures) == num:
break # txin is complete
ii = txin['pubkeys'].index(pubkey)
signed = dbb_signatures[i]
if 'recid' in signed:
# firmware > v2.1.1
recid = int(signed['recid'], 16)
s = binascii.unhexlify(signed['sig'])
h = inputhasharray[i]
pk = MyVerifyingKey.from_signature(s, recid, h, curve = SECP256k1)
pk = to_hexstr(point_to_ser(pk.pubkey.point, True))
elif 'pubkey' in signed:
# firmware <= v2.1.1
pk = signed['pubkey']
if pk != pubkey:
continue
sig_r = int(signed['sig'][:64], 16)
sig_s = int(signed['sig'][64:], 16)
sig = sigencode_der(sig_r, sig_s, generator_secp256k1.order())
txin['signatures'][ii] = to_hexstr(sig) + '41'
tx._inputs[i] = txin
except UserCancelled:
raise
except BaseException as e:
self.give_error(e, True)
else:
print_error("Transaction is_complete", tx.is_complete())
tx.raw = tx.serialize()
def select_storage(
self, path, get_wallet_from_daemon
) -> Tuple[str, Optional[WalletStorage]]:
vbox = QtWidgets.QVBoxLayout()
vbox.addWidget(
QtWidgets.QLabel(
_('Create a new wallet or load an existing wallet from file.'))
)
vbox.addSpacing(20)
hbox = QtWidgets.QHBoxLayout()
hbox.addWidget(QtWidgets.QLabel(_('Wallet name') + ':'))
self.name_e = QtWidgets.QLineEdit()
self.name_e.setToolTip(
_("Enter a wallet name (new or existing), or the path to a wallet file.")
)
hbox.addWidget(self.name_e)
button = QtWidgets.QPushButton(_('Load...'))
button.setToolTip(_("Open a file selection dialog to load a wallet file."))
hbox.addWidget(button)
vbox.addLayout(hbox)
vbox.addSpacing(20)
self.msg_label = QtWidgets.QLabel('')
vbox.addWidget(self.msg_label)
hbox2 = QtWidgets.QHBoxLayout()
self.pw_e = PasswordLineEdit('', self)
self.pw_e.setFixedWidth(17 * char_width_in_lineedit())
self.pw_label = QtWidgets.QLabel(_('Password') + ':')
hbox2.addWidget(self.pw_label)
hbox2.addWidget(self.pw_e)
hbox2.addStretch()
vbox.addLayout(hbox2)
self.set_layout(vbox, title=_(f'{PROJECT_NAME} wallet'))
self.temp_storage = WalletStorage(path, manual_upgrades=True)
wallet_folder = os.path.dirname(self.temp_storage.path)
def on_choose():
path, __ = QtWidgets.QFileDialog.getOpenFileName(self, "Select your wallet file", wallet_folder)
if path:
self.name_e.setText(path)
def on_filename(filename):
path = os.path.join(wallet_folder, filename)
wallet_from_memory = get_wallet_from_daemon(path)
try:
if wallet_from_memory:
self.temp_storage = wallet_from_memory.storage
else:
self.temp_storage = WalletStorage(path, manual_upgrades=True)
self.next_button.setEnabled(True)
except IOError:
self.temp_storage = None
self.next_button.setEnabled(False)
if self.temp_storage:
if not self.temp_storage.file_exists():
msg =_("This file does not exist.") + '\n' \
+ _("Press 'Next' to create this wallet, or choose another file.")
pw = False
elif not wallet_from_memory:
if self.temp_storage.is_encrypted_with_user_pw():
msg = _("This file is encrypted with a password.") + '\n' \
+ _('Enter your password or choose another file.')
pw = True
elif self.temp_storage.is_encrypted_with_hw_device():
msg = _("This file is encrypted using a hardware device.") + '\n' \
+ _("Press 'Next' to choose device to decrypt.")
pw = False
else:
msg = _("Press 'Next' to open this wallet.")
pw = False
else:
msg = _("This file is already open in memory.") + "\n" \
+ _("Press 'Next' to create/focus window.")
pw = False
else:
msg = _('Cannot read file')
pw = False
self.msg_label.setText(msg)
if pw:
self.pw_label.show()
self.pw_e.show()
self.pw_e.setFocus()
else:
self.pw_label.hide()
self.pw_e.hide()
button.clicked.connect(on_choose)
self.name_e.textChanged.connect(on_filename)
n = os.path.basename(self.temp_storage.path)
self.name_e.setText(n)
while True:
if self.loop.exec_() != 2: # 2 = next
raise UserCancelled
if self.temp_storage.file_exists() and not self.temp_storage.is_encrypted():
break
if not self.temp_storage.file_exists():
break
wallet_from_memory = get_wallet_from_daemon(self.temp_storage.path)
if wallet_from_memory:
raise WalletAlreadyOpenInMemory(wallet_from_memory)
if self.temp_storage.file_exists() and self.temp_storage.is_encrypted():
if self.temp_storage.is_encrypted_with_user_pw():
password = self.pw_e.text()
try:
self.temp_storage.decrypt(password)
break
except InvalidPassword as e:
QtWidgets.QMessageBox.information(None, _('Error'), str(e))
continue
except BaseException as e:
traceback.print_exc(file=sys.stdout)
QtWidgets.QMessageBox.information(None, _('Error'), str(e))
raise UserCancelled()
elif self.temp_storage.is_encrypted_with_hw_device():
try:
self.run(
'choose_hw_device',
HWD_SETUP_DECRYPT_WALLET,
storage=self.temp_storage
)
except InvalidPassword as e:
QtWidgets.QMessageBox.information(
None, _('Error'),
_('Failed to decrypt using this hardware device.') + '\n' +
_('If you use a passphrase, make sure it is correct.'))
self.reset_stack()
return self.select_storage(path, get_wallet_from_daemon)
except BaseException as e:
traceback.print_exc(file=sys.stdout)
QtWidgets.QMessageBox.information(None, _('Error'), str(e))
raise UserCancelled()
if self.temp_storage.is_past_initial_decryption():
break
else:
raise UserCancelled()
else:
raise Exception('Unexpected encryption version')
return self.temp_storage.path, (self.temp_storage if self.temp_storage.file_exists() else None)