def toBooster(self):
item = Market.getInstance().getItem(self.itemID, eager=('attributes', 'group.category'))
try:
booster = Booster(item)
except ValueError:
pyfalog.warning('Invalid item: {}'.format(self.itemID))
return None
if self.state is not None:
booster.active = self.state
if self.sideEffects is not None:
for sideEffect in booster.sideEffects:
sideEffect.active = self.sideEffects.get(sideEffect.effectID, sideEffect.active)
return booster
def addImplant(self, itemSpec):
if itemSpec is None:
return
if 'implantness' in itemSpec.item.attributes:
self.implants.append(Implant(itemSpec.item))
elif 'boosterness' in itemSpec.item.attributes:
self.boosters.append(Booster(itemSpec.item))
else:
pyfalog.error('Failed to import implant: {}', itemSpec.typeName)
def Do(self):
pyfalog.debug("Adding booster ({0}) to fit ID: {1}", self.itemID, self.fitID)
fit = eos.db.getFit(self.fitID)
item = eos.db.getItem(self.itemID, eager="attributes")
if next((x for x in fit.boosters if x.itemID == self.itemID), None):
return False # already have item in list of boosters
try:
booster = Booster(item)
except ValueError:
pyfalog.warning("Invalid item: {0}", self.itemID)
return False
self.old_item = fit.boosters.makeRoom(booster)
fit.boosters.append(booster)
self.new_index = fit.boosters.index(booster)
return True
def importEftCfg(shipname, lines, iportuser):
"""Handle import from EFT config store file"""
# Check if we have such ship in database, bail if we don't
sMkt = Market.getInstance()
try:
sMkt.getItem(shipname)
except (KeyboardInterrupt, SystemExit):
raise
except:
return [] # empty list is expected
fits = [] # List for fits
fitIndices = [] # List for starting line numbers for each fit
for line in lines:
# Detect fit header
if line[:1] == "[" and line[-1:] == "]":
# Line index where current fit starts
startPos = lines.index(line)
fitIndices.append(startPos)
for i, startPos in enumerate(fitIndices):
# End position is last file line if we're trying to get it for last fit,
# or start position of next fit minus 1
endPos = len(lines) if i == len(fitIndices) - 1 else fitIndices[i + 1]
# Finally, get lines for current fitting
fitLines = lines[startPos:endPos]
try:
# Create fit object
fitobj = Fit()
# Strip square brackets and pull out a fit name
fitobj.name = fitLines[0][1:-1]
# Assign ship to fitting
try:
fitobj.ship = Ship(sMkt.getItem(shipname))
except ValueError:
fitobj.ship = Citadel(sMkt.getItem(shipname))
moduleList = []
for x in range(1, len(fitLines)):
line = fitLines[x]
if not line:
continue
# Parse line into some data we will need
misc = re.match(
"(Drones|Implant|Booster)_(Active|Inactive)=(.+)", line)
cargo = re.match("Cargohold=(.+)", line)
# 2017/03/27 NOTE: store description from EFT
description = re.match("Description=(.+)", line)
if misc:
entityType = misc.group(1)
entityState = misc.group(2)
entityData = misc.group(3)
if entityType == "Drones":
droneData = re.match("(.+),([0-9]+)", entityData)
# Get drone name and attempt to detect drone number
droneName = droneData.group(
1) if droneData else entityData
droneAmount = int(
droneData.group(2)) if droneData else 1
# Bail if we can't get item or it's not from drone category
try:
droneItem = sMkt.getItem(droneName,
eager="group.category")
except (KeyboardInterrupt, SystemExit):
raise
except:
pyfalog.warning("Cannot get item.")
continue
if droneItem.category.name == "Drone":
# Add drone to the fitting
d = Drone(droneItem)
d.amount = droneAmount
if entityState == "Active":
d.amountActive = droneAmount
elif entityState == "Inactive":
d.amountActive = 0
fitobj.drones.append(d)
elif droneItem.category.name == "Fighter": # EFT saves fighter as drones
ft = Fighter(droneItem)
ft.amount = int(
droneAmount
) if ft.amount <= ft.fighterSquadronMaxSize else ft.fighterSquadronMaxSize
fitobj.fighters.append(ft)
else:
continue
elif entityType == "Implant":
# Bail if we can't get item or it's not from implant category
try:
implantItem = sMkt.getItem(entityData,
eager="group.category")
except (KeyboardInterrupt, SystemExit):
raise
except:
pyfalog.warning("Cannot get item.")
continue
if implantItem.category.name != "Implant":
continue
# Add implant to the fitting
imp = Implant(implantItem)
if entityState == "Active":
imp.active = True
elif entityState == "Inactive":
imp.active = False
fitobj.implants.append(imp)
elif entityType == "Booster":
# Bail if we can't get item or it's not from implant category
try:
boosterItem = sMkt.getItem(entityData,
eager="group.category")
except (KeyboardInterrupt, SystemExit):
raise
except:
pyfalog.warning("Cannot get item.")
continue
# All boosters have implant category
if boosterItem.category.name != "Implant":
continue
# Add booster to the fitting
b = Booster(boosterItem)
if entityState == "Active":
b.active = True
elif entityState == "Inactive":
b.active = False
fitobj.boosters.append(b)
# If we don't have any prefixes, then it's a module
elif cargo:
cargoData = re.match("(.+),([0-9]+)", cargo.group(1))
cargoName = cargoData.group(
1) if cargoData else cargo.group(1)
cargoAmount = int(cargoData.group(2)) if cargoData else 1
# Bail if we can't get item
try:
item = sMkt.getItem(cargoName)
except (KeyboardInterrupt, SystemExit):
raise
except:
pyfalog.warning("Cannot get item.")
continue
# Add Cargo to the fitting
c = Cargo(item)
c.amount = cargoAmount
fitobj.cargo.append(c)
# 2017/03/27 NOTE: store description from EFT
elif description:
fitobj.notes = description.group(1).replace("|", "\n")
else:
withCharge = re.match("(.+),(.+)", line)
modName = withCharge.group(1) if withCharge else line
chargeName = withCharge.group(2) if withCharge else None
# If we can't get module item, skip it
try:
modItem = sMkt.getItem(modName)
except (KeyboardInterrupt, SystemExit):
raise
except:
pyfalog.warning("Cannot get item.")
continue
# Create module
m = Module(modItem)
# Add subsystems before modules to make sure T3 cruisers have subsystems installed
if modItem.category.name == "Subsystem":
if m.fits(fitobj):
fitobj.modules.append(m)
else:
m.owner = fitobj
# Activate mod if it is activable
if m.isValidState(FittingModuleState.ACTIVE):
m.state = activeStateLimit(m.item)
# Add charge to mod if applicable, on any errors just don't add anything
if chargeName:
try:
chargeItem = sMkt.getItem(
chargeName, eager="group.category")
if chargeItem.category.name == "Charge":
m.charge = chargeItem
except (KeyboardInterrupt, SystemExit):
raise
except:
pyfalog.warning("Cannot get item.")
pass
# Append module to fit
moduleList.append(m)
# Recalc to get slot numbers correct for T3 cruisers
sFit = svcFit.getInstance()
sFit.recalc(fitobj)
sFit.fill(fitobj)
for module in moduleList:
if module.fits(fitobj):
fitobj.modules.append(module)
# Append fit to list of fits
fits.append(fitobj)
if iportuser: # NOTE: Send current processing status
processing_notify(
iportuser, IPortUser.PROCESS_IMPORT | IPortUser.ID_UPDATE,
"%s:\n%s" % (fitobj.ship.name, fitobj.name))
except (KeyboardInterrupt, SystemExit):
raise
# Skip fit silently if we get an exception
except Exception as e:
pyfalog.error("Caught exception on fit.")
pyfalog.error(e)
pass
return fits
def importEftCfg(shipname, lines, iportuser):
"""Handle import from EFT config store file"""
# Check if we have such ship in database, bail if we don't
sMkt = Market.getInstance()
try:
sMkt.getItem(shipname)
except:
return [] # empty list is expected
fits = [] # List for fits
fitIndices = [] # List for starting line numbers for each fit
for line in lines:
# Detect fit header
if line[:1] == "[" and line[-1:] == "]":
# Line index where current fit starts
startPos = lines.index(line)
fitIndices.append(startPos)
for i, startPos in enumerate(fitIndices):
# End position is last file line if we're trying to get it for last fit,
# or start position of next fit minus 1
endPos = len(lines) if i == len(fitIndices) - 1 else fitIndices[i + 1]
# Finally, get lines for current fitting
fitLines = lines[startPos:endPos]
try:
# Create fit object
fitobj = Fit()
# Strip square brackets and pull out a fit name
fitobj.name = fitLines[0][1:-1]
# Assign ship to fitting
try:
fitobj.ship = Ship(sMkt.getItem(shipname))
except ValueError:
fitobj.ship = Citadel(sMkt.getItem(shipname))
moduleList = []
for x in range(1, len(fitLines)):
line = fitLines[x]
if not line:
continue
# Parse line into some data we will need
misc = re.match("(Drones|Implant|Booster)_(Active|Inactive)=(.+)", line)
cargo = re.match("Cargohold=(.+)", line)
# 2017/03/27 NOTE: store description from EFT
description = re.match("Description=(.+)", line)
if misc:
entityType = misc.group(1)
entityState = misc.group(2)
entityData = misc.group(3)
if entityType == "Drones":
droneData = re.match("(.+),([0-9]+)", entityData)
# Get drone name and attempt to detect drone number
droneName = droneData.group(1) if droneData else entityData
droneAmount = int(droneData.group(2)) if droneData else 1
# Bail if we can't get item or it's not from drone category
try:
droneItem = sMkt.getItem(droneName, eager="group.category")
except:
pyfalog.warning("Cannot get item.")
continue
if droneItem.category.name == "Drone":
# Add drone to the fitting
d = Drone(droneItem)
d.amount = droneAmount
if entityState == "Active":
d.amountActive = droneAmount
elif entityState == "Inactive":
d.amountActive = 0
fitobj.drones.append(d)
elif droneItem.category.name == "Fighter": # EFT saves fighter as drones
ft = Fighter(droneItem)
ft.amount = int(droneAmount) if ft.amount <= ft.fighterSquadronMaxSize else ft.fighterSquadronMaxSize
fitobj.fighters.append(ft)
else:
continue
elif entityType == "Implant":
# Bail if we can't get item or it's not from implant category
try:
implantItem = sMkt.getItem(entityData, eager="group.category")
except:
pyfalog.warning("Cannot get item.")
continue
if implantItem.category.name != "Implant":
continue
# Add implant to the fitting
imp = Implant(implantItem)
if entityState == "Active":
imp.active = True
elif entityState == "Inactive":
imp.active = False
fitobj.implants.append(imp)
elif entityType == "Booster":
# Bail if we can't get item or it's not from implant category
try:
boosterItem = sMkt.getItem(entityData, eager="group.category")
except:
pyfalog.warning("Cannot get item.")
continue
# All boosters have implant category
if boosterItem.category.name != "Implant":
continue
# Add booster to the fitting
b = Booster(boosterItem)
if entityState == "Active":
b.active = True
elif entityState == "Inactive":
b.active = False
fitobj.boosters.append(b)
# If we don't have any prefixes, then it's a module
elif cargo:
cargoData = re.match("(.+),([0-9]+)", cargo.group(1))
cargoName = cargoData.group(1) if cargoData else cargo.group(1)
cargoAmount = int(cargoData.group(2)) if cargoData else 1
# Bail if we can't get item
try:
item = sMkt.getItem(cargoName)
except:
pyfalog.warning("Cannot get item.")
continue
# Add Cargo to the fitting
c = Cargo(item)
c.amount = cargoAmount
fitobj.cargo.append(c)
# 2017/03/27 NOTE: store description from EFT
elif description:
fitobj.notes = description.group(1).replace("|", "\n")
else:
withCharge = re.match("(.+),(.+)", line)
modName = withCharge.group(1) if withCharge else line
chargeName = withCharge.group(2) if withCharge else None
# If we can't get module item, skip it
try:
modItem = sMkt.getItem(modName)
except:
pyfalog.warning("Cannot get item.")
continue
# Create module
m = Module(modItem)
# Add subsystems before modules to make sure T3 cruisers have subsystems installed
if modItem.category.name == "Subsystem":
if m.fits(fitobj):
fitobj.modules.append(m)
else:
m.owner = fitobj
# Activate mod if it is activable
if m.isValidState(FittingModuleState.ACTIVE):
m.state = activeStateLimit(m.item)
# Add charge to mod if applicable, on any errors just don't add anything
if chargeName:
try:
chargeItem = sMkt.getItem(chargeName, eager="group.category")
if chargeItem.category.name == "Charge":
m.charge = chargeItem
except:
pyfalog.warning("Cannot get item.")
pass
# Append module to fit
moduleList.append(m)
# Recalc to get slot numbers correct for T3 cruisers
sFit = svcFit.getInstance()
sFit.recalc(fitobj)
sFit.fill(fitobj)
for module in moduleList:
if module.fits(fitobj):
fitobj.modules.append(module)
# Append fit to list of fits
fits.append(fitobj)
if iportuser: # NOTE: Send current processing status
processing_notify(
iportuser, IPortUser.PROCESS_IMPORT | IPortUser.ID_UPDATE,
"%s:\n%s" % (fitobj.ship.name, fitobj.name)
)
# Skip fit silently if we get an exception
except Exception as e:
pyfalog.error("Caught exception on fit.")
pyfalog.error(e)
pass
return fits
def importEftCfg(shipname, contents, callback=None):
"""Handle import from EFT config store file"""
# Check if we have such ship in database, bail if we don't
sMkt = Market.getInstance()
try:
sMkt.getItem(shipname)
except:
return [] # empty list is expected
# If client didn't take care of encoding file contents into Unicode,
# do it using fallback encoding ourselves
if isinstance(contents, str):
contents = unicode(contents, "cp1252")
fits = [] # List for fits
fitIndices = [] # List for starting line numbers for each fit
lines = re.split('[\n\r]+', contents) # Separate string into lines
for line in lines:
# Detect fit header
if line[:1] == "[" and line[-1:] == "]":
# Line index where current fit starts
startPos = lines.index(line)
fitIndices.append(startPos)
for i, startPos in enumerate(fitIndices):
# End position is last file line if we're trying to get it for last fit,
# or start position of next fit minus 1
endPos = len(lines) if i == len(fitIndices) - 1 else fitIndices[i +
1]
# Finally, get lines for current fitting
fitLines = lines[startPos:endPos]
try:
# Create fit object
f = Fit()
# Strip square brackets and pull out a fit name
f.name = fitLines[0][1:-1]
# Assign ship to fitting
try:
f.ship = Ship(sMkt.getItem(shipname))
except ValueError:
f.ship = Citadel(sMkt.getItem(shipname))
moduleList = []
for x in range(1, len(fitLines)):
line = fitLines[x]
if not line:
continue
# Parse line into some data we will need
misc = re.match(
"(Drones|Implant|Booster)_(Active|Inactive)=(.+)",
line)
cargo = re.match("Cargohold=(.+)", line)
if misc:
entityType = misc.group(1)
entityState = misc.group(2)
entityData = misc.group(3)
if entityType == "Drones":
droneData = re.match("(.+),([0-9]+)", entityData)
# Get drone name and attempt to detect drone number
droneName = droneData.group(
1) if droneData else entityData
droneAmount = int(
droneData.group(2)) if droneData else 1
# Bail if we can't get item or it's not from drone category
try:
droneItem = sMkt.getItem(
droneName, eager="group.category")
except:
continue
if droneItem.category.name != "Drone":
continue
# Add drone to the fitting
d = Drone(droneItem)
d.amount = droneAmount
if entityState == "Active":
d.amountActive = droneAmount
elif entityState == "Inactive":
d.amountActive = 0
f.drones.append(d)
elif entityType == "Implant":
# Bail if we can't get item or it's not from implant category
try:
implantItem = sMkt.getItem(
entityData, eager="group.category")
except:
continue
if implantItem.category.name != "Implant":
continue
# Add implant to the fitting
imp = Implant(implantItem)
if entityState == "Active":
imp.active = True
elif entityState == "Inactive":
imp.active = False
f.implants.append(imp)
elif entityType == "Booster":
# Bail if we can't get item or it's not from implant category
try:
boosterItem = sMkt.getItem(
entityData, eager="group.category")
except:
continue
# All boosters have implant category
if boosterItem.category.name != "Implant":
continue
# Add booster to the fitting
b = Booster(boosterItem)
if entityState == "Active":
b.active = True
elif entityState == "Inactive":
b.active = False
f.boosters.append(b)
# If we don't have any prefixes, then it's a module
elif cargo:
cargoData = re.match("(.+),([0-9]+)", cargo.group(1))
cargoName = cargoData.group(
1) if cargoData else cargo.group(1)
cargoAmount = int(
cargoData.group(2)) if cargoData else 1
# Bail if we can't get item
try:
item = sMkt.getItem(cargoName)
except:
continue
# Add Cargo to the fitting
c = Cargo(item)
c.amount = cargoAmount
f.cargo.append(c)
else:
withCharge = re.match("(.+),(.+)", line)
modName = withCharge.group(1) if withCharge else line
chargeName = withCharge.group(
2) if withCharge else None
# If we can't get module item, skip it
try:
modItem = sMkt.getItem(modName)
except:
continue
# Create module
m = Module(modItem)
# Add subsystems before modules to make sure T3 cruisers have subsystems installed
if modItem.category.name == "Subsystem":
if m.fits(f):
f.modules.append(m)
else:
m.owner = f
# Activate mod if it is activable
if m.isValidState(State.ACTIVE):
m.state = State.ACTIVE
# Add charge to mod if applicable, on any errors just don't add anything
if chargeName:
try:
chargeItem = sMkt.getItem(
chargeName, eager="group.category")
if chargeItem.category.name == "Charge":
m.charge = chargeItem
except:
pass
# Append module to fit
moduleList.append(m)
# Recalc to get slot numbers correct for T3 cruisers
Fit.getInstance().recalc(f)
for module in moduleList:
if module.fits(f):
f.modules.append(module)
# Append fit to list of fits
fits.append(f)
if callback:
wx.CallAfter(callback, None)
# Skip fit silently if we get an exception
except Exception:
pass
return fits
def importEft(eftString):
sMkt = Market.getInstance()
offineSuffix = " /OFFLINE"
fit = Fit()
eftString = eftString.strip()
lines = re.split('[\n\r]+', eftString)
info = lines[0][1:-1].split(",", 1)
if len(info) == 2:
shipType = info[0].strip()
fitName = info[1].strip()
else:
shipType = info[0].strip()
fitName = "Imported %s" % shipType
try:
ship = sMkt.getItem(shipType)
try:
fit.ship = Ship(ship)
except ValueError:
fit.ship = Citadel(ship)
fit.name = fitName
except:
pyfalog.warning("Exception caught in importEft")
return
# maintain map of drones and their quantities
droneMap = {}
cargoMap = {}
moduleList = []
for i in range(1, len(lines)):
ammoName = None
extraAmount = None
line = lines[i].strip()
if not line:
continue
setOffline = line.endswith(offineSuffix)
if setOffline is True:
# remove offline suffix from line
line = line[:len(line) - len(offineSuffix)]
modAmmo = line.split(",")
# matches drone and cargo with x{qty}
modExtra = modAmmo[0].split(" x")
if len(modAmmo) == 2:
# line with a module and ammo
ammoName = modAmmo[1].strip()
modName = modAmmo[0].strip()
elif len(modExtra) == 2:
# line with drone/cargo and qty
extraAmount = modExtra[1].strip()
modName = modExtra[0].strip()
else:
# line with just module
modName = modExtra[0].strip()
try:
# get item information. If we are on a Drone/Cargo line, throw out cargo
item = sMkt.getItem(modName, eager="group.category")
except:
# if no data can be found (old names)
pyfalog.warning("no data can be found (old names)")
continue
if item.category.name == "Drone":
extraAmount = int(
extraAmount) if extraAmount is not None else 1
if modName not in droneMap:
droneMap[modName] = 0
droneMap[modName] += extraAmount
elif item.category.name == "Fighter":
extraAmount = int(
extraAmount) if extraAmount is not None else 1
fighterItem = Fighter(item)
if extraAmount > fighterItem.fighterSquadronMaxSize: # Amount bigger then max fightergroup size
extraAmount = fighterItem.fighterSquadronMaxSize
if fighterItem.fits(fit):
fit.fighters.append(fighterItem)
if len(
modExtra
) == 2 and item.category.name != "Drone" and item.category.name != "Fighter":
extraAmount = int(
extraAmount) if extraAmount is not None else 1
if modName not in cargoMap:
cargoMap[modName] = 0
cargoMap[modName] += extraAmount
elif item.category.name == "Implant":
if "implantness" in item.attributes:
fit.implants.append(Implant(item))
elif "boosterness" in item.attributes:
fit.boosters.append(Booster(item))
else:
pyfalog.error("Failed to import implant: {0}", line)
# elif item.category.name == "Subsystem":
# try:
# subsystem = Module(item)
# except ValueError:
# continue
#
# if subsystem.fits(fit):
# fit.modules.append(subsystem)
else:
try:
m = Module(item)
except ValueError:
continue
# Add subsystems before modules to make sure T3 cruisers have subsystems installed
if item.category.name == "Subsystem":
if m.fits(fit):
fit.modules.append(m)
else:
if ammoName:
try:
ammo = sMkt.getItem(ammoName)
if m.isValidCharge(ammo) and m.charge is None:
m.charge = ammo
except:
pass
if setOffline is True and m.isValidState(State.OFFLINE):
m.state = State.OFFLINE
elif m.isValidState(State.ACTIVE):
m.state = State.ACTIVE
moduleList.append(m)
# Recalc to get slot numbers correct for T3 cruisers
svcFit.getInstance().recalc(fit)
for m in moduleList:
if m.fits(fit):
m.owner = fit
if not m.isValidState(m.state):
pyfalog.warning("Error: Module {0} cannot have state {1}",
m, m.state)
fit.modules.append(m)
for droneName in droneMap:
d = Drone(sMkt.getItem(droneName))
d.amount = droneMap[droneName]
fit.drones.append(d)
for cargoName in cargoMap:
c = Cargo(sMkt.getItem(cargoName))
c.amount = cargoMap[cargoName]
fit.cargo.append(c)
return fit
