def validate_color_temperature(value):
try:
val = cv.float_with_unit('Color Temperature', 'mireds')(value)
except vol.Invalid:
val = 1000000.0 / cv.float_with_unit('Color Temperature', 'K')(value)
if val < 0:
raise vol.Invalid("Color temperature cannot be negative")
return val
unit_of_measurement=UNIT_LUX,
icon=ICON_BRIGHTNESS_6,
accuracy_decimals=4,
device_class=DEVICE_CLASS_ILLUMINANCE,
state_class=STATE_CLASS_MEASUREMENT,
),
cv.Optional(CONF_INTEGRATION_TIME, default="100ms"):
validate_integration_time,
cv.Optional(CONF_NAME, default="TLS2591"):
cv.string,
cv.Optional(CONF_GAIN, default="AUTO"):
cv.enum(GAINS, upper=True),
cv.Optional(CONF_POWER_SAVE_MODE, default=True):
cv.boolean,
cv.Optional(CONF_DEVICE_FACTOR, default=53.0):
cv.float_with_unit("device_factor", "", True),
cv.Optional(CONF_GLASS_ATTENUATION_FACTOR, default=7.7):
cv.float_with_unit("glass_attenuation_factor", "", True),
}).extend(cv.polling_component_schema("60s")).extend(
i2c.i2c_device_schema(0x29)))
async def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
await cg.register_component(var, config)
await i2c.register_i2c_device(var, config)
if CONF_FULL_SPECTRUM in config:
conf = config[CONF_FULL_SPECTRUM]
sens = await sensor.new_sensor(conf)
cg.add(var.set_full_spectrum_sensor(sens))
cv.Required(CONF_NUMBER):
validate_gpio_pin,
cv.Optional(CONF_MODE, default={}):
cv.Schema({
cv.Optional(CONF_INPUT, default=False): cv.boolean,
cv.Optional(CONF_OUTPUT, default=False): cv.boolean,
cv.Optional(CONF_OPEN_DRAIN, default=False): cv.boolean,
cv.Optional(CONF_PULLUP, default=False): cv.boolean,
cv.Optional(CONF_PULLDOWN, default=False): cv.boolean,
}),
cv.Optional(CONF_INVERTED, default=False):
cv.boolean,
cv.SplitDefault(CONF_DRIVE_STRENGTH, esp32_idf="20mA"):
cv.All(
cv.only_with_esp_idf,
cv.float_with_unit("current", "mA", optional_unit=True),
cv.enum(DRIVE_STRENGTHS),
),
},
validate_supports,
)
@pins.PIN_SCHEMA_REGISTRY.register("esp32", ESP32_PIN_SCHEMA)
async def esp32_pin_to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
num = config[CONF_NUMBER]
if CORE.using_esp_idf:
cg.add(var.set_pin(getattr(gpio_num_t, f"GPIO_NUM_{num}")))
else:
cg.add(var.set_pin(num))
raise cv.Invalid("The gains can't be zero")
max_energy = (0.25 * 0.25 / 3600 / (2 ** -4)) / (voltage_gain * current_gain)
min_energy = (0.25 * 0.25 / 3600 / (2 ** 18)) / (voltage_gain * current_gain)
mech_min_energy = (0.25 * 0.25 / 3600 / 7.8) / (voltage_gain * current_gain)
if pulse_energy < min_energy or pulse_energy > max_energy:
raise cv.Invalid(
"For given current&voltage gains, the pulse energy must be between "
f"{min_energy} Wh and {max_energy} Wh and in mechanical counter mode "
f"between {mech_min_energy} Wh and {max_energy} Wh"
)
return config
validate_energy = cv.float_with_unit("energy", "(Wh|WH|wh)?", optional_unit=True)
CONFIG_SCHEMA = cv.All(
cv.Schema(
{
cv.GenerateID(): cv.declare_id(CS5460AComponent),
cv.Optional(CONF_SAMPLES, default=4000): cv.int_range(min=1, max=0xFFFFFF),
cv.Optional(CONF_PHASE_OFFSET, default=0): cv.int_range(min=-64, max=63),
cv.Optional(CONF_PGA_GAIN, default="10X"): cv.enum(
PGA_GAIN_OPTIONS, upper=True
),
cv.Optional(CONF_CURRENT_GAIN, default=0.001): cv.negative_one_to_one_float,
cv.Optional(CONF_VOLTAGE_GAIN, default=0.001): cv.zero_to_one_float,
cv.Optional(CONF_CURRENT_HPF, default=True): cv.boolean,
cv.Optional(CONF_VOLTAGE_HPF, default=True): cv.boolean,
cv.Optional(CONF_PULSE_ENERGY, default=10.0): validate_energy,
accuracy_decimals=1,
device_class=DEVICE_CLASS_TEMPERATURE,
state_class=STATE_CLASS_MEASUREMENT,
),
cv.Optional(CONF_HUMIDITY):
sensor.sensor_schema(
unit_of_measurement=UNIT_PERCENT,
accuracy_decimals=1,
device_class=DEVICE_CLASS_HUMIDITY,
state_class=STATE_CLASS_MEASUREMENT,
),
cv.Optional(CONF_AUTOMATIC_SELF_CALIBRATION, default=True):
cv.boolean,
cv.Optional(CONF_ALTITUDE_COMPENSATION):
cv.All(
cv.float_with_unit("altitude", "(m|m a.s.l.|MAMSL|MASL)"),
cv.int_range(min=0, max=0xFFFF, max_included=False),
),
cv.Optional(CONF_AMBIENT_PRESSURE_COMPENSATION, default=0):
cv.pressure,
cv.Optional(CONF_TEMPERATURE_OFFSET):
cv.temperature,
}).extend(cv.polling_component_schema("60s")).extend(
i2c.i2c_device_schema(0x61)))
async def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
await cg.register_component(var, config)
await i2c.register_i2c_device(var, config)
),
cv.Optional(CONF_CALCULATED_LUX): sensor.sensor_schema(
UNIT_LUX,
ICON_BRIGHTNESS_6,
4,
DEVICE_CLASS_ILLUMINANCE,
STATE_CLASS_MEASUREMENT,
),
cv.Optional(
CONF_INTEGRATION_TIME, default="100ms"
): validate_integration_time,
cv.Optional(CONF_NAME, default="TLS2591"): cv.string,
cv.Optional(CONF_GAIN, default="MEDIUM"): cv.enum(GAINS, upper=True),
cv.Optional(CONF_POWER_SAVE_MODE, default=True): cv.boolean,
cv.Optional(CONF_DEVICE_FACTOR, default=53.0): cv.float_with_unit(
"device_factor", "", True
),
cv.Optional(CONF_GLASS_ATTENUATION_FACTOR, default=7.7): cv.float_with_unit(
"glass_attenuation_factor", "", True
),
}
)
.extend(cv.polling_component_schema("60s"))
.extend(i2c.i2c_device_schema(0x29))
)
async def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
await cg.register_component(var, config)
await i2c.register_i2c_device(var, config)
