def run(dom, stream):
constraints=VectorConstrainerOverBox()
constraints.domain=Link(dom)
constraints.left=[1,0,0]
constraints.right=[1,0,0]
constraints.top=[0,1,0]
constraints.bottom=[0,1,0]
constraints.front=[0,0,1]
constraints.back=[0,0,1]
sqe=Sequencer()
sqe.dt_max=0.5
sqe.t_end=1.
source=EvaluateExpression()
source.domain=Link(dom)
source.t=Link(sqe)
source.expression=["t","t"]
flow=SteadyIncompressibleFlow()
flow.domain=Link(dom,"domain")
flow.internal_force=Link(source,"out")
flow.location_prescribed_velocity=Link(constraints,"location_of_constraint")
flow.prescribed_velocity=[0.,0.]
ptest=Probe()
ptest.expression="(x[0]+x[1]-1.)*t"
ptest.t=Link(sqe)
ptest.value=Link(flow,"pressure")
s=Simulation([sqe,constraints,Simulation([flow],debug=True),ptest],debug=True)
s.writeXML(stream)
s.run()
def run(dom, stream):
constraints=VectorConstrainerOverBox()
constraints.domain=Link(dom)
constraints.left=[1,0,0]
constraints.right=[1,0,0]
constraints.top=[0,1,0]
constraints.bottom=[0,1,0]
constraints.front=[0,0,1]
constraints.back=[0,0,1]
sqe=Sequencer()
sqe.dt_max=0.5
sqe.t_end=1.
source=EvaluateExpression()
source.domain=Link(dom)
source.t=Link(sqe)
source.expression=["t","t"]
flow=SteadyIncompressibleFlow()
flow.domain=Link(dom,"domain")
flow.internal_force=Link(source,"out")
flow.location_prescribed_velocity=Link(constraints,"location_of_constraint")
flow.prescribed_velocity=[0.,0.]
ptest=Probe()
ptest.expression="(x[0]+x[1]-1.)*t"
ptest.t=Link(sqe)
ptest.value=Link(flow,"pressure")
s=Simulation([sqe,constraints,Simulation([flow],debug=True),ptest],debug=True)
s.writeXML(stream)
s.run()
def run(dom, stream):
temp_val = InterpolateOverBox()
temp_val.domain = Link(dom, "domain")
temp_val.value_left_bottom_front = 1.
temp_val.value_right_bottom_front = 1.
temp_val.value_left_top_front = 0.
temp_val.value_right_top_front = 0.
temp_val.value_left_bottom_back = 1.
temp_val.value_right_bottom_back = 1.
temp_val.value_left_top_back = 0.
temp_val.value_right_top_back = 0.
temp_constraints = ScalarConstrainerOverBox()
temp_constraints.domain = Link(dom)
temp_constraints.top = 1
temp_constraints.bottom = 1
vel_constraints = VectorConstrainerOverBox()
vel_constraints.domain = Link(dom)
vel_constraints.left = [1, 0, 0]
vel_constraints.right = [1, 0, 0]
vel_constraints.top = [0, 1, 0]
vel_constraints.bottom = [0, 1, 0]
vel_constraints.front = [0, 0, 1]
vel_constraints.back = [0, 0, 1]
mat = SimpleEarthModel()
mat.density0 = 1.
mat.viscocity0 = 1.
mat.rayleigh_number = 10000.
mat.alpha = 0.001
temp = TemperatureAdvection(debug=True)
temp.domain = Link(dom)
temp.density = Link(mat, "density0")
temp.heat_capacity = Link(mat, "heat_capacity")
temp.location_fixed_temperature = Link(temp_constraints,
"location_of_constraint")
temp.fixed_temperature = Link(temp_val, "out")
temp.safety_factor = 0.01
mat.temperature = Link(temp, "temperature")
grav = GravityForce()
grav.domain = Link(dom, "domain")
grav.direction = [0., -1., 0.]
grav.density = Link(mat, "density")
grav.gravity = Link(mat, "gravity")
vel = SteadyIncompressibleFlow(debug=True)
vel.domain = Link(dom)
vel.internal_force = Link(grav, "gravity_force")
vel.viscosity = Link(mat, "viscosity")
vel.location_prescribed_velocity = Link(vel_constraints,
"location_of_constraint")
vel.rel_tol = 1.e-6
temp.velocity = Link(vel, "velocity")
sq = Sequencer()
sq.t_end = 0.001
vis = WriteVTK()
vis.t = Link(sq)
vis.data0 = Link(temp, "temperature")
vis.data1 = Link(vel, "velocity")
vis.dt = 0.0001
vis.filename = os.path.join(WORKDIR, "temp.vtu")
per = GaussianProfile()
per.domain = Link(dom)
per.x_c = [0.5, 0.5, 0.5]
per.A = 0.0001
per.width = 0.01
per.r = 0
lc = LinearCombination()
lc.f0 = 1.
lc.v0 = Link(per, "out")
lc.f1 = 1.
lc.v1 = Link(temp_val, "out")
temp.temperature = Link(lc, "out")
s = Simulation([
sq, vel_constraints, temp_constraints,
Simulation([vel], debug=True), temp, vis
],
debug=True)
s.writeXML(stream)
s.run()
# iob.value_right_top_front=[0.,0.] # iob.value_left_top_back=[-1.,0.] # iob.value_right_top_back=[0.,0.] m = DruckerPrager(debug=dbg) m.domain = Link(dom, "domain") cv = VectorConstrainerOverBox(debug=dbg) cv.domain = Link(dom, "domain") cv.value = Link(iob, "out") cv.left = [True, False, False] cv.right = [True, True, True] cv.bottom = [False, False, False] cv.top = [False, False, False] cv.front = [False, False, False] cv.back = [False, False, False] m.velocity = Link(iob, "out") m.prescribed_velocity = Link(cv, "value_of_constraint") m.location_prescribed_velocity = Link(cv, "location_of_constraint") m.rel_tol = 0.01 m.expansion_coefficient = 0. m.bulk_modulus = 1000. m.shear_modulus = 1. m.plastic_stress = 0. m.friction_parameter = 0. m.dilatancy_parameter = 0. m.shear_length = m.shear_modulus * 0.9
def run(dom, stream):
temp_val=InterpolateOverBox()
temp_val.domain=Link(dom,"domain")
temp_val.value_left_bottom_front=1.
temp_val.value_right_bottom_front=1.
temp_val.value_left_top_front=0.
temp_val.value_right_top_front=0.
temp_val.value_left_bottom_back=1.
temp_val.value_right_bottom_back=1.
temp_val.value_left_top_back=0.
temp_val.value_right_top_back=0.
temp_constraints=ScalarConstrainerOverBox()
temp_constraints.domain=Link(dom)
temp_constraints.top=1
temp_constraints.bottom=1
vel_constraints=VectorConstrainerOverBox()
vel_constraints.domain=Link(dom)
vel_constraints.left=[1,0,0]
vel_constraints.right=[1,0,0]
vel_constraints.top=[0,1,0]
vel_constraints.bottom=[0,1,0]
vel_constraints.front=[0,0,1]
vel_constraints.back=[0,0,1]
mat=SimpleEarthModel()
mat.density0=1.
mat.viscocity0=1.
mat.rayleigh_number=10000.
mat.alpha=0.001
temp=TemperatureAdvection(debug=True)
temp.domain=Link(dom)
temp.density=Link(mat,"density0")
temp.heat_capacity=Link(mat,"heat_capacity")
temp.location_fixed_temperature=Link(temp_constraints,"location_of_constraint")
temp.fixed_temperature=Link(temp_val,"out")
temp.safety_factor=0.01
mat.temperature=Link(temp,"temperature")
grav=GravityForce()
grav.domain=Link(dom,"domain")
grav.direction=[0.,-1.,0.]
grav.density=Link(mat,"density")
grav.gravity=Link(mat,"gravity")
vel=SteadyIncompressibleFlow(debug=True)
vel.domain=Link(dom)
vel.internal_force=Link(grav,"gravity_force")
vel.viscosity=Link(mat,"viscosity")
vel.location_prescribed_velocity=Link(vel_constraints,"location_of_constraint")
vel.rel_tol=1.e-6
temp.velocity=Link(vel,"velocity")
sq=Sequencer()
sq.t_end=0.001
vis=WriteVTK()
vis.t=Link(sq)
vis.data0=Link(temp,"temperature")
vis.data1=Link(vel,"velocity")
vis.dt=0.0001
vis.filename=os.path.join(WORKDIR,"temp.vtu")
per=GaussianProfile()
per.domain=Link(dom)
per.x_c=[0.5,0.5,0.5]
per.A=0.0001
per.width=0.01
per.r=0
lc=LinearCombination()
lc.f0=1.
lc.v0=Link(per,"out")
lc.f1=1.
lc.v1=Link(temp_val,"out")
temp.temperature=Link(lc,"out")
s=Simulation([sq,vel_constraints, temp_constraints,Simulation([vel],debug=True),temp,vis],debug=True)
s.writeXML(stream)
s.run()
# iob.value_right_top_front=[0.,0.] # iob.value_left_top_back=[-1.,0.] # iob.value_right_top_back=[0.,0.] m=DruckerPrager(debug=dbg) m.domain=Link(dom,"domain") cv=VectorConstrainerOverBox(debug=dbg) cv.domain=Link(dom,"domain") cv.value=Link(iob,"out") cv.left=[True, False, False] cv.right= [True, True, True] cv.bottom= [False, False, False] cv.top= [False, False, False] cv.front= [False, False, False] cv.back= [False, False, False] m.velocity=Link(iob,"out") m.prescribed_velocity=Link(cv,"value_of_constraint") m.location_prescribed_velocity=Link(cv,"location_of_constraint") m.rel_tol=0.01 m.expansion_coefficient= 0. m.bulk_modulus=1000. m.shear_modulus=1. m.plastic_stress=0. m.friction_parameter=0. m.dilatancy_parameter=0. m.shear_length=m.shear_modulus*0.9