def Simulate(SC, mbs):
#%%++++++++++++++++++++++++++++++++++++++++++++++++++++++
#assemble system and solve
simulationSettings = exu.SimulationSettings() #takes currently set values or default values
tEnd = 2 #simulation time
h = 1e-3 #step size
simulationSettings.timeIntegration.numberOfSteps = int(tEnd/h)
simulationSettings.timeIntegration.endTime = tEnd
simulationSettings.timeIntegration.verboseMode = 1
simulationSettings.timeIntegration.simulateInRealtime = True
SC.visualizationSettings.general.autoFitScene = False
SC.visualizationSettings.window.renderWindowSize=[1600,1200]
SC.visualizationSettings.openGL.multiSampling = 4
# exu.StartRenderer()
# if 'renderState' in exu.sys: #reload old view
# SC.SetRenderState(exu.sys['renderState'])
mbs.WaitForUserToContinue() #stop before simulating
exu.SolveDynamic(mbs, simulationSettings = simulationSettings,
solverType=exu.DynamicSolverType.TrapezoidalIndex2)
def SolveStatic(
mbs,
simulationSettings=exudyn.SimulationSettings(),
updateInitialValues=False,
storeSolver=True,
showHints=False,
showCausingItems=True,
):
staticSolver = exudyn.MainSolverStatic()
if storeSolver:
mbs.sys[
'staticSolver'] = staticSolver #copy solver structure to sys variable
mbs.sys[
'simulationSettings'] = simulationSettings #link to last simulation settings
success = False
try:
success = staticSolver.SolveSystem(mbs, simulationSettings)
except:
pass
#print error message after except, to catch all errors
if not success:
# exudyn.Print not shown in Spyder at this time (because of exception?)
# exudyn.Print(SolverErrorMessage(staticSolver, mbs, isStatic=True, showCausingObjects=showCausingItems,
# showCausingNodes=showCausingItems, showHints=showHints))
print(
SolverErrorMessage(staticSolver,
mbs,
isStatic=True,
showCausingObjects=showCausingItems,
showCausingNodes=showCausingItems,
showHints=showHints))
raise ValueError("SolveStatic terminated due to errors")
elif updateInitialValues:
currentState = mbs.systemData.GetSystemState() #get current values
mbs.systemData.SetSystemState(
systemStateList=currentState,
configuration=exudyn.ConfigurationType.Initial)
return success
def TestExudyn(x):
#create an environment for mini example
SC = exu.SystemContainer()
mbs = SC.AddSystem()
oGround = mbs.AddObject(ObjectGround(referencePosition=[0, 0, 0]))
nGround = mbs.AddNode(NodePointGround(referenceCoordinates=[0, 0, 0]))
testError = 1 #set default error, if failed
exu.Print("start mini example for class ObjectMass1D")
node = mbs.AddNode(
Node1D(referenceCoordinates=[0],
initialCoordinates=[0.],
initialVelocities=[1 * x]))
mass = mbs.AddObject(Mass1D(nodeNumber=node, physicsMass=1))
#assemble and solve system for default parameters
mbs.Assemble()
#exu.SolveDynamic(mbs, exu.SimulationSettings())
h = 1e-6
tEnd = 10
simulationSettings = exu.SimulationSettings()
simulationSettings.timeIntegration.numberOfSteps = int(tEnd / h)
simulationSettings.timeIntegration.endTime = tEnd
simulationSettings.solutionSettings.coordinatesSolutionFileName = "coordinatesSolution" + str(
int(x)) + ".txt"
simulationSettings.solutionSettings.writeSolutionToFile = True #no concurrent writing to files ...!
#exu.StartRenderer() #don't do this in parallelization: will crash
exu.SolveDynamic(mbs, simulationSettings)
#exu.StopRenderer() #don't do this in parallelization: will crash
#check result, get current mass position at local position [0,0,0]
result = mbs.GetObjectOutputBody(mass, exu.OutputVariableType.Position,
[0, 0, 0])[0]
print("result ", x, "=", result)
return result
markerNumbers=[mGlobalGround, mRigidBodyRot],
damping=1e6,
visualization=VObjectConnectorCoordinateSpringDamper(show=False)))
positionOfBody += distanceBetweenBodys
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++#
# Assemble multibody system
#+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++#
mbs.Assemble()
#exu.Print(mbs)
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++#
# Simualtion settings:
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++#
simulationSettings = exu.SimulationSettings()
#simulationSettings.staticSolver.loadStepGeometric = True
#simulationSettings.staticSolver.adaptiveStep = False
simulationSettings.staticSolver.numberOfLoadSteps = 10
#simulationSettings.staticSolver.loadStepGeometricRange = 100
simulationSettings.staticSolver.newton.relativeTolerance = 1e-7 #with this error tolerance, the adaptive step selection needs 4 steps
#simulationSettings.staticSolver.verboseMode=1
#simulationSettings.staticSolver.verboseModeFile=2
simulationSettings.staticSolver.stabilizerODE2term = 2
SC.visualizationSettings.general.circleTiling = 64
SC.visualizationSettings.nodes.defaultSize = 0.125
SC.visualizationSettings.contour.outputVariable = exu.OutputVariableType.Displacement
SC.visualizationSettings.contour.outputVariableComponent = 1 # plot y-component
SC.visualizationSettings.connectors.contactPointsDefaultSize = .005
initialCoordinates=[initialLocalMarker, slidingCoordinateInit],
numberOfDataCoordinates=2)) #initial index in cable list
slidingJoint = mbs.AddObject(
ObjectJointSliding2D(name='slider',
markerNumbers=[
markerRigidTop,
cableMarkerList[initialLocalMarker]
],
slidingMarkerNumbers=cableMarkerList,
slidingMarkerOffsets=offsetList,
nodeNumber=nodeDataSJ))
mbs.Assemble()
print(mbs)
simulationSettings = exu.SimulationSettings(
) #takes currently set values or default values
#simulationSettings.solutionSettings.coordinatesSolutionFileName = 'ANCFCable2Dbending' + str(nElements) + '.txt'
h = 5e-4
tEnd = 0.6
simulationSettings.timeIntegration.numberOfSteps = int(tEnd / h)
simulationSettings.timeIntegration.endTime = tEnd
simulationSettings.solutionSettings.writeSolutionToFile = True
simulationSettings.solutionSettings.solutionWritePeriod = h
#simulationSettings.solutionSettings.outputPrecision = 4
simulationSettings.displayComputationTime = True
simulationSettings.timeIntegration.verboseMode = 1
# simulationSettings.timeIntegration.newton.relativeTolerance = 1e-8*100 #10000
# simulationSettings.timeIntegration.newton.absoluteTolerance = 1e-10*100
def ParameterFunction(parameterSet):
SC = exu.SystemContainer()
mbs = SC.AddSystem()
#default values
mass = 1.6 #mass in kg
spring = 4000 #stiffness of spring-damper in N/m
damper = 8 #damping constant in N/(m/s)
u0=-0.08 #initial displacement
v0=1 #initial velocity
f =80 #force applied to mass
#process parameters
if 'mass' in parameterSet:
mass = parameterSet['mass']
if 'spring' in parameterSet:
spring = parameterSet['spring']
iCalc = 'Ref' #needed for parallel computation ==> output files are different for every computation
if 'computationIndex' in parameterSet:
iCalc = str(parameterSet['computationIndex'])
#mass-spring-damper system
L=0.5 #spring length (for drawing)
x0=f/spring #static displacement
# print('resonance frequency = '+str(np.sqrt(spring/mass)))
# print('static displacement = '+str(x0))
#node for 3D mass point:
n1=mbs.AddNode(Point(referenceCoordinates = [L,0,0],
initialCoordinates = [u0,0,0],
initialVelocities= [v0,0,0]))
#ground node
nGround=mbs.AddNode(NodePointGround(referenceCoordinates = [0,0,0]))
#add mass point (this is a 3D object with 3 coordinates):
massPoint = mbs.AddObject(MassPoint(physicsMass = mass, nodeNumber = n1))
#marker for ground (=fixed):
groundMarker=mbs.AddMarker(MarkerNodeCoordinate(nodeNumber= nGround, coordinate = 0))
#marker for springDamper for first (x-)coordinate:
nodeMarker =mbs.AddMarker(MarkerNodeCoordinate(nodeNumber= n1, coordinate = 0))
#spring-damper between two marker coordinates
nC = mbs.AddObject(CoordinateSpringDamper(markerNumbers = [groundMarker, nodeMarker],
stiffness = spring, damping = damper))
#add load:
mbs.AddLoad(LoadCoordinate(markerNumber = nodeMarker,
load = f))
#add sensor:
fileName = 'solution/paramVarDisplacement'+iCalc+'.txt'
mbs.AddSensor(SensorObject(objectNumber=nC, fileName=fileName,
outputVariableType=exu.OutputVariableType.Force))
#print(mbs)
mbs.Assemble()
steps = 1000 #number of steps to show solution
tEnd = 1 #end time of simulation
simulationSettings = exu.SimulationSettings()
#simulationSettings.solutionSettings.solutionWritePeriod = 5e-3 #output interval general
simulationSettings.solutionSettings.writeSolutionToFile = False
simulationSettings.solutionSettings.sensorsWritePeriod = 5e-3 #output interval of sensors
simulationSettings.timeIntegration.numberOfSteps = steps
simulationSettings.timeIntegration.endTime = tEnd
simulationSettings.timeIntegration.generalizedAlpha.spectralRadius = 1 #no damping
#exu.StartRenderer() #start graphics visualization
#mbs.WaitForUserToContinue() #wait for pressing SPACE bar to continue
#start solver:
exu.SolveDynamic(mbs, simulationSettings)
#SC.WaitForRenderEngineStopFlag()#wait for pressing 'Q' to quit
#exu.StopRenderer() #safely close rendering window!
# #evaluate final (=current) output values
# u = mbs.GetNodeOutput(n1, exu.OutputVariableType.Position)
# print('displacement=',u)
#+++++++++++++++++++++++++++++++++++++++++++++++++++++
#evaluate difference between reference and optimized solution
#reference solution:
dataRef = np.loadtxt('solution/paramVarDisplacementRef.txt', comments='#', delimiter=',')
data = np.loadtxt(fileName, comments='#', delimiter=',')
diff = data[:,1]-dataRef[:,1]
errorNorm = np.sqrt(np.dot(diff,diff))/steps*tEnd
#+++++++++++++++++++++++++++++++++++++++++++++++++++++
#compute exact solution:
if False:
from matplotlib import plt
plt.close('all')
plt.plot(data[:,0], data[:,1], 'b-', label='displacement (m)')
ax=plt.gca() # get current axes
ax.grid(True, 'major', 'both')
ax.xaxis.set_major_locator(ticker.MaxNLocator(10))
ax.yaxis.set_major_locator(ticker.MaxNLocator(10))
plt.legend() #show labels as legend
plt.tight_layout()
plt.show()
import os
if iCalc != 'Ref':
os.remove(fileName) #remove files in order to clean up
del mbs
del SC
return errorNorm
exu.Print("start mini example for class ObjectANCFCable2D")
try: #puts example in safe environment
node = mbs.AddNode(NodePoint(referenceCoordinates=[1.05, 0, 0]))
oMassPoint = mbs.AddObject(MassPoint(nodeNumber=node, physicsMass=1))
m0 = mbs.AddMarker(
MarkerBodyPosition(bodyNumber=oGround, localPosition=[0, 0, 0]))
m1 = mbs.AddMarker(
MarkerBodyPosition(bodyNumber=oMassPoint, localPosition=[0, 0, 0]))
mbs.AddObject(
ObjectConnectorSpringDamper(
markerNumbers=[m0, m1],
referenceLength=1, #shorter than initial distance
stiffness=100,
damping=1))
#assemble and solve system for default parameters
mbs.Assemble()
exu.SolveDynamic(mbs, exu.SimulationSettings())
#check result at default integration time
testError = mbs.GetNodeOutput(
node, exu.OutputVariableType.Position)[0] - 0.9736596225944887
except BaseException as e:
exu.Print("An error occured in test example for ObjectANCFCable2D:", e)
else:
exu.Print("example for ObjectANCFCable2D completed, test error =",
testError)
def SolutionViewer(mainSystem,
solution=[],
rowIncrement=1,
timeout=0.04,
runOnStart=True,
runMode=2):
from exudyn.utilities import SetSolutionState, LoadSolutionFile
mbs = mainSystem
SC = mbs.GetSystemContainer()
if solution == []:
if not 'simulationSettings' in mbs.sys:
raise ValueError(
'SolutionViewer: no solution file found (already simulated?)!')
sims = mbs.sys['simulationSettings']
if not sims.solutionSettings.writeSolutionToFile:
raise ValueError(
'SolutionViewer: previous simulation has writeSolutionToFile==False; no solution file available!'
)
solution = LoadSolutionFile(
sims.solutionSettings.coordinatesSolutionFileName
) #load solution file of previous simulation
nRows = solution['nRows']
if nRows == 0:
print('ERROR in SolutionViewer: solution file is empty')
return
if (runMode != 0 and runMode != 1 and runMode != 2):
print('ERROR in SolutionViewer: illegal run mode:', runMode)
return
if (rowIncrement < 1) or (rowIncrement > nRows):
print(
'ERROR in SolutionViewer: rowIncrement must be at least 1 and must not be larger than the number of rows in the solution file'
)
oldUpdateInterval = SC.visualizationSettings.general.graphicsUpdateInterval
SC.visualizationSettings.general.graphicsUpdateInterval = 0.5 * min(
timeout, 2e-3) #avoid too small values to run multithreading properly
mbs.SetRenderEngineStopFlag(False) #not to stop right at the beginning
# runLoop = False
# while runLoop and not mainSystem.GetRenderEngineStopFlag():
# for i in range(0,nRows,rowIncrement):
# if not(mainSystem.GetRenderEngineStopFlag()):
# SetSolutionState(mainSystem, solution, i, exudyn.ConfigurationType.Visualization)
# exudyn.DoRendererIdleTasks(timeout)
SetSolutionState(mainSystem, solution, 0,
exudyn.ConfigurationType.Visualization)
exudyn.DoRendererIdleTasks(timeout)
nSteps = int(nRows) #only make these steps available in slider!
maxNSteps = max(500, min(
nSteps,
1200)) #do not allow more steps, because dialog may be too large ...
resolution = min(1., maxNSteps / nSteps) #do not use values smaller than 1
dialogItems = [
{
'type': 'label',
'text': 'Solution steps:',
'grid': (1, 0)
},
{
'type': 'slider',
'range': (0, nSteps - 1),
'value': 0,
'steps': maxNSteps,
'variable': 'solutionViewerStep',
'resolution': resolution,
'grid': (1, 1)
},
{
'type': 'label',
'text': 'Increment:',
'grid': (2, 0)
},
{
'type': 'slider',
'range': (1, 200),
'value': rowIncrement,
'steps': 200,
'variable': 'solutionViewerRowIncrement',
'grid': (2, 1)
},
{
'type': 'label',
'text': 'update period:',
'grid': (3, 0)
},
{
'type': 'slider',
'range': (0.005, 1),
'value': timeout,
'steps': 200,
'variable': 'solutionViewerPeriod',
'grid': (3, 1)
},
{
'type':
'radio',
'textValueList': [('Continuous run', 0), ('One cycle', 1),
('Static', 2)],
'value':
runMode,
'variable':
'solutionViewerRunModus',
'grid': [(4, 0), (4, 1), (4, 2)]
},
#{'type':'radio', 'textValueList':[('Mesh+Faces',3), ('Faces only',1), ('Mesh only',2)],'value':3, 'variable':'modeShapeMesh', 'grid': [(8,0),(8,1),(8,2)]},
{
'type': 'radio',
'textValueList': [('Record animation', 0), ('No recording', 1)],
'value': 1,
'variable': 'solutionViewerSaveImages',
'grid': [(5, 0), (5, 1)]
},
]
mbs.variables['solutionViewerRowIncrement'] = float(rowIncrement)
mbs.variables['solutionViewerNSteps'] = nSteps
mbs.variables['solutionViewerSolution'] = solution
# mbs.variables['solutionViewerStep'] = 0
# mbs.variables['solutionViewerPeriod'] = timeout
def UFviewer(mbs, dialog):
i = int(mbs.variables['solutionViewerStep'])
# mbs.systemData.SetTime(t, exudyn.ConfigurationType.Visualization)
SetSolutionState(mainSystem, mbs.variables['solutionViewerSolution'],
i, exudyn.ConfigurationType.Visualization)
#exudyn.DoRendererIdleTasks(timeout)
# SC.visualizationSettings.contour.reduceRange = False
mbs.SendRedrawSignal()
exudyn.DoRendererIdleTasks(
) #as there is no simulation, we must do this for graphicsDataUserFunctions
# if mbs.variables['modeShapeSaveImages'] == 0:
# SC.RedrawAndSaveImage() #create images for animation
# else:
# SC.visualizationSettings.exportImages.saveImageFileCounter = 0 #for next mode ...
dialog.period = mbs.variables['solutionViewerPeriod']
if mbs.variables['solutionViewerRunModus'] < 2:
mbs.variables['solutionViewerStep'] += mbs.variables[
'solutionViewerRowIncrement']
# print("step=", mbs.variables['solutionViewerStep'])
#first variable is scale, which contains step
dialog.variableList[0][0].set(mbs.variables['solutionViewerStep'])
# for var in dialog.variableList:
# #self.mbs.variables[var[1]] = var[0].get()
# print(var[1],'=', var[0].get())
if mbs.variables['solutionViewerSaveImages'] == 0:
SC.RedrawAndSaveImage() #create images for animation
# else: #do not reset image counter to allow creating of multi-view images, slow motion, etc.
# SC.visualizationSettings.exportImages.saveImageFileCounter = 0 #
if mbs.variables['solutionViewerStep'] > mbs.variables[
'solutionViewerNSteps'] - 1.:
#or (mbs.variables['solutionViewerRunModus'] and mbs.variables['solutionViewerStep']==mbs.variables['solutionViewerNSteps']-1.):
mbs.variables['solutionViewerStep'] = 0
dialog.variableList[0][0].set(0)
SetSolutionState(mainSystem,
mbs.variables['solutionViewerSolution'], 0,
exudyn.ConfigurationType.Visualization)
# mbs.SendRedrawSignal()
# exudyn.DoRendererIdleTasks() #as there is no simulation, we must do this for graphicsDataUserFunctions
if mbs.variables[
'solutionViewerRunModus'] == 1: #one cylce ==> stop
dialog.StartSimulation() #start/stop simulation
exudyn.StartRenderer()
if 'renderState' in exudyn.sys:
SC.SetRenderState(exudyn.sys['renderState']) #load last model view
simulationSettings = exudyn.SimulationSettings(
) #not used, but needed in dialog
# self.mbs.sys['solver'].InitializeSolver(self.mbs, self.simulationSettings)
simulationSettings.solutionSettings.solutionInformation = ''
if not SC.visualizationSettings.general.useMultiThreadedRendering:
exudyn.DoRendererIdleTasks() #do an update once
dialog = InteractiveDialog(mbs,
simulationSettings=simulationSettings,
simulationFunction=UFviewer,
dialogItems=dialogItems,
title='Solution Viewer',
doTimeIntegration=False,
period=timeout,
showTime=True,
runOnStart=runOnStart)
#SC.WaitForRenderEngineStopFlag() #not needed, Render window closes when dialog is quit
exudyn.StopRenderer() #safely close rendering window!
SC.visualizationSettings.general.graphicsUpdateInterval = oldUpdateInterval #set values back to original
def AnimateModes(systemContainer,
mainSystem,
nodeNumber,
period=0.04,
stepsPerPeriod=30,
showTime=True,
renderWindowText='',
runOnStart=False,
runMode=0):
SC = systemContainer
mbs = mainSystem
SC.visualizationSettings.general.graphicsUpdateInterval = 0.25 * min(
period, 2e-3) #set according update interval!
SC.visualizationSettings.general.showSolverTime = showTime
#SC.visualizationSettings.general.showComputationInfo = False
SC.visualizationSettings.general.showSolverInformation = False
SC.visualizationSettings.general.renderWindowString = renderWindowText + 'mode 0'
coordIndex = mbs.GetNodeODE2Index(nodeNumber)
nodeCoords = mbs.GetNodeOutput(nodeNumber,
exudyn.OutputVariableType.Coordinates,
exudyn.ConfigurationType.Reference)
numberOfModes = len(nodeCoords)
#numberOfModes = mbs.GetNode(nODE2)['numberOfODE2Coordinates']
if (runMode != 0 and runMode != 1 and runMode != 2):
print('ERROR in AnimateModes: illegal run mode:', runMode)
return
#use interactive dialog:
dialogItems = [
{
'type': 'label',
'text': 'Mode shape:',
'grid': (1, 0)
},
{
'type': 'slider',
'range': (0, numberOfModes - 1),
'value': 0,
'steps': numberOfModes,
'variable': 'modeShapeModeNumber',
'grid': (1, 1)
},
{
'type': 'label',
'text': 'Contour plot:',
'grid': (2, 0)
},
{
'type':
'radio',
'textValueList':
[('None', int(exudyn.OutputVariableType._None)),
('DisplacementLocal',
int(exudyn.OutputVariableType.DisplacementLocal)),
('Displacement', int(exudyn.OutputVariableType.Displacement)),
('StressLocal', int(exudyn.OutputVariableType.StressLocal)),
('StrainLocal', int(exudyn.OutputVariableType.StrainLocal))],
'value':
int(exudyn.OutputVariableType.DisplacementLocal),
'variable':
'modeShapeOutputVariable',
'grid': [(3, 0), (3, 1), (3, 2), (3, 3), (3, 4)]
},
{
'type': 'label',
'text': 'Contour Component (use -1 for norm):',
'grid': (4, 0)
},
{
'type': 'slider',
'range': (-1, 5),
'value': 0,
'steps': 7,
'variable': 'modeShapeComponent',
'grid': (4, 1)
},
{
'type': 'label',
'text': 'Amplitude:',
'grid': (5, 0)
},
{
'type': 'slider',
'range': (0, 0.5),
'value': 0.05,
'steps': 501,
'variable': 'modeShapeAmplitude',
'grid': (5, 1)
},
{
'type': 'label',
'text': 'update period:',
'grid': (6, 0)
},
{
'type': 'slider',
'range': (0.01, 2),
'value': 0.04,
'steps': 200,
'variable': 'modeShapePeriod',
'grid': (6, 1)
},
{
'type':
'radio',
'textValueList': [('Continuous run', 0), ('One cycle', 1),
('Static', 2)],
'value':
runMode,
'variable':
'modeShapeRunModus',
'grid': [(7, 0), (7, 1), (7, 2)]
},
{
'type':
'radio',
'textValueList': [('Mesh+Faces', 3), ('Faces only', 1),
('Mesh only', 2)],
'value':
3,
'variable':
'modeShapeMesh',
'grid': [(8, 0), (8, 1), (8, 2)]
},
{
'type': 'radio',
'textValueList': [('Record animation', 0), ('No recording', 1)],
'value': 1,
'variable': 'modeShapeSaveImages',
'grid': [(9, 0), (9, 1)]
},
]
mbs.variables['modeShapePeriod'] = period
mbs.variables['modeShapeStepsPerPeriod'] = stepsPerPeriod
mbs.variables['modeShapeTimeIndex'] = 0
mbs.variables['modeShapeLastSetting'] = [-1, 0, 0, 0]
mbs.variables['modeShapeNodeCoordIndex'] = coordIndex
def UFshowModes(mbs, dialog):
i = mbs.variables['modeShapeTimeIndex']
mbs.variables['modeShapeTimeIndex'] += 1
stepsPerPeriod = mbs.variables['modeShapeStepsPerPeriod']
amplitude = mbs.variables['modeShapeAmplitude']
if amplitude == 0:
SC.visualizationSettings.bodies.deformationScaleFactor = 0
amplitude = 1
else:
SC.visualizationSettings.bodies.deformationScaleFactor = 1
if mbs.variables['modeShapeRunModus'] == 2: #no sin(t) in static case
stepsPerPeriod = 1
t = 0
else:
t = i / stepsPerPeriod * 2 * pi
amplitude *= sin(t)
mbs.systemData.SetTime(t, exudyn.ConfigurationType.Visualization)
ode2Coords = mbs.systemData.GetODE2Coordinates()
selectedMode = int(mbs.variables['modeShapeModeNumber'])
outputVariable = exudyn.OutputVariableType(
int(mbs.variables['modeShapeOutputVariable']))
ode2Coords[mbs.variables['modeShapeNodeCoordIndex'] +
selectedMode] = amplitude
mbs.systemData.SetODE2Coordinates(
ode2Coords, exudyn.ConfigurationType.Visualization)
SC.visualizationSettings.contour.reduceRange = False
#check, if automatic range of contour colors shall be recomputed:
if (mbs.variables['modeShapeLastSetting'][0] != int(
mbs.variables['modeShapeModeNumber'])
or mbs.variables['modeShapeLastSetting'][1] != int(
mbs.variables['modeShapeOutputVariable'])
or mbs.variables['modeShapeLastSetting'][2] !=
mbs.variables['modeShapeAmplitude']
or mbs.variables['modeShapeLastSetting'][3] != int(
mbs.variables['modeShapeComponent'])):
#print("set=",mbs.variables['modeShapeLastSetting'])
SC.visualizationSettings.contour.reduceRange = True
SC.visualizationSettings.general.renderWindowString = renderWindowText + 'mode ' + str(
int(mbs.variables['modeShapeModeNumber']))
mbs.variables['modeShapeLastSetting'] = [
int(mbs.variables['modeShapeModeNumber']),
int(mbs.variables['modeShapeOutputVariable']),
mbs.variables['modeShapeAmplitude'],
int(mbs.variables['modeShapeComponent'])
]
SC.visualizationSettings.contour.outputVariable = outputVariable
SC.visualizationSettings.contour.outputVariableComponent = int(
mbs.variables['modeShapeComponent']) #component
SC.visualizationSettings.openGL.showFaces = (
mbs.variables['modeShapeMesh'] & 1) == 1
SC.visualizationSettings.openGL.showFaceEdges = (
mbs.variables['modeShapeMesh'] & 2) == 2
mbs.SendRedrawSignal()
if not SC.visualizationSettings.general.useMultiThreadedRendering:
exudyn.DoRendererIdleTasks()
if mbs.variables['modeShapeSaveImages'] == 0:
SC.RedrawAndSaveImage() #create images for animation
else:
SC.visualizationSettings.exportImages.saveImageFileCounter = 0 #for next mode ...
dialog.period = mbs.variables['modeShapePeriod']
if mbs.variables['modeShapeTimeIndex'] >= stepsPerPeriod:
mbs.variables['modeShapeTimeIndex'] = 0
if mbs.variables['modeShapeRunModus'] > 0: #one cylce or static
dialog.StartSimulation()
exudyn.StartRenderer()
if 'renderState' in exudyn.sys:
SC.SetRenderState(exudyn.sys['renderState']) #load last model view
simulationSettings = exudyn.SimulationSettings(
) #not used, but needed in dialog
# self.mbs.sys['solver'].InitializeSolver(self.mbs, self.simulationSettings)
simulationSettings.solutionSettings.solutionInformation = 'Mode X'
if not SC.visualizationSettings.general.useMultiThreadedRendering:
exudyn.DoRendererIdleTasks() #do an update once
dialog = InteractiveDialog(
mbs,
simulationSettings=simulationSettings,
simulationFunction=UFshowModes,
dialogItems=dialogItems,
title='Animate mode shapes',
doTimeIntegration=False,
period=period,
showTime=False, #done in UFshowModes
runOnStart=runOnStart)
#SC.WaitForRenderEngineStopFlag() #not needed, Render window closes when dialog is quit
exudyn.StopRenderer() #safely close rendering window!
oGround = mbs.AddObject(ObjectGround(referencePosition=[0, 0, 0]))
nGround = mbs.AddNode(NodePointGround(referenceCoordinates=[0, 0, 0]))
testError = 1 #set default error, if failed
exu.Print("start mini example for class ObjectRotationalMass1D")
try: #puts example in safe environment
node = mbs.AddNode(
Node1D(
referenceCoordinates=[1], #\psi_0ref
initialCoordinates=[0.5], #\psi_0ini
initialVelocities=[0.5])) #\psi_t0ini
rotor = mbs.AddObject(Rotor1D(nodeNumber=node, physicsInertia=1))
#assemble and solve system for default parameters
mbs.Assemble()
SC.TimeIntegrationSolve(mbs, 'GeneralizedAlpha', exu.SimulationSettings())
#check result
#check result, get current rotor z-rotation at local position [0,0,0]
testError = mbs.GetObjectOutputBody(rotor, exu.OutputVariableType.Rotation,
[0, 0, 0]) - 2
#final z-angle of rotor shall be 2
except BaseException as e:
exu.Print("An error occured in test example for ObjectRotationalMass1D:",
e)
else:
exu.Print("example for ObjectRotationalMass1D completed, test error =",
testError)
def ParameterFunction(parameterSet):
SC = exu.SystemContainer()
mbs = SC.AddSystem()
#default values
mass = 1.6 #mass in kg
spring = 4000 #stiffness of spring-damper in N/m
damper = 8 #old: 8; damping constant in N/(m/s)
u0 = -0.08 #initial displacement
v0 = 1 #initial velocity
force = 80 #force applied to mass
#process parameters
if 'mass' in parameterSet:
mass = parameterSet['mass']
if 'spring' in parameterSet:
spring = parameterSet['spring']
if 'force' in parameterSet:
force = parameterSet['force']
iCalc = 'Ref' #needed for parallel computation ==> output files are different for every computation
if 'computationIndex' in parameterSet:
iCalc = str(parameterSet['computationIndex'])
#print("computation index=",iCalc, flush=True)
L = 0.5 #spring length (for drawing)
n1 = mbs.AddNode(
Point(referenceCoordinates=[L, 0, 0],
initialCoordinates=[u0, 0, 0],
initialVelocities=[v0, 0, 0]))
#ground node
nGround = mbs.AddNode(NodePointGround(referenceCoordinates=[0, 0, 0]))
#add mass point (this is a 3D object with 3 coordinates):
massPoint = mbs.AddObject(MassPoint(physicsMass=mass, nodeNumber=n1))
#marker for ground (=fixed):
groundMarker = mbs.AddMarker(
MarkerNodeCoordinate(nodeNumber=nGround, coordinate=0))
#marker for springDamper for first (x-)coordinate:
nodeMarker = mbs.AddMarker(
MarkerNodeCoordinate(nodeNumber=n1, coordinate=0))
#spring-damper between two marker coordinates
nC = mbs.AddObject(
CoordinateSpringDamper(markerNumbers=[groundMarker, nodeMarker],
stiffness=spring,
damping=damper))
#add load:
mbs.AddLoad(LoadCoordinate(markerNumber=nodeMarker, load=force))
#add sensor:
sensorFileName = 'solution/paramVarDisplacement' + iCalc + '.txt'
mbs.AddSensor(
SensorObject(objectNumber=nC,
fileName=sensorFileName,
outputVariableType=exu.OutputVariableType.Displacement))
#print("sensorFileName",sensorFileName)
#print(mbs)
mbs.Assemble()
steps = 100 #number of steps to show solution
tEnd = 1 #end time of simulation
simulationSettings = exu.SimulationSettings()
#simulationSettings.solutionSettings.solutionWritePeriod = 5e-3 #output interval general
simulationSettings.solutionSettings.writeSolutionToFile = False
simulationSettings.solutionSettings.sensorsWritePeriod = 2e-3 #output interval of sensors
simulationSettings.timeIntegration.numberOfSteps = steps
simulationSettings.timeIntegration.endTime = tEnd
simulationSettings.timeIntegration.generalizedAlpha.spectralRadius = 1 #no damping
exu.SolveDynamic(mbs, simulationSettings)
#+++++++++++++++++++++++++++++++++++++++++++++++++++++
#evaluate difference between reference and optimized solution
#reference solution:
dataRef = np.loadtxt('solution/paramVarDisplacementRef.txt',
comments='#',
delimiter=',')
data = np.loadtxt(sensorFileName, comments='#', delimiter=',')
diff = data[:, 1] - dataRef[:, 1]
errorNorm = np.sqrt(np.dot(diff, diff)) / steps * tEnd
if True: #delete files; does not work for parallel, consecutive operation
if iCalc != 'Ref':
os.remove(sensorFileName) #remove files in order to clean up
while (os.path.exists(sensorFileName)
): #wait until file is really deleted -> usually some delay
sleep(0.001) #not nice, but there is no other way than that
del mbs
del SC
return errorNorm
def ComputeODE2Eigenvalues(mbs,
simulationSettings=exudyn.SimulationSettings(),
useSparseSolver=False,
numberOfEigenvalues=0,
setInitialValues=True,
convert2Frequencies=False):
import numpy as np
#use static solver, as it does not include factors from time integration (and no velocity derivatives) in the jacobian
staticSolver = exudyn.MainSolverStatic()
#initialize solver with initial values
staticSolver.InitializeSolver(mbs, simulationSettings)
staticSolver.ComputeMassMatrix(mbs)
M = staticSolver.GetSystemMassMatrix()
staticSolver.ComputeJacobianODE2RHS(
mbs) #compute ODE2 part of jacobian ==> stored internally in solver
staticSolver.ComputeJacobianAE(
mbs) #compute algebraic part of jacobian (not needed here...)
jacobian = staticSolver.GetSystemJacobian() #read out stored jacobian
nODE2 = staticSolver.GetODE2size()
#obtain ODE2 part from jacobian == stiffness matrix
K = jacobian[0:nODE2, 0:nODE2]
if not useSparseSolver:
from scipy.linalg import eigh #eigh for symmetric matrices, positive definite; eig for standard eigen value problems
[eigenValuesUnsorted, eigenVectors
] = eigh(K,
M) #this gives omega^2 ... squared eigen frequencies (rad/s)
eigenValues = np.sort(
a=abs(eigenValuesUnsorted)) #eigh returns unsorted eigenvalues...
if numberOfEigenvalues > 0:
eigenValues = eigenValues[0:numberOfEigenvalues]
eigenVectors = eigenVectors[0:numberOfEigenvalues]
else:
if numberOfEigenvalues == 0: #compute all eigenvalues
numberOfEigenvalues = nODE2
from scipy.sparse.linalg import eigsh, csr_matrix #eigh for symmetric matrices, positive definite
Kcsr = csr_matrix(K)
Mcsr = csr_matrix(M)
#use "LM" (largest magnitude), but shift-inverted mode with sigma=0, to find the zero-eigenvalues:
#see https://docs.scipy.org/doc/scipy/reference/tutorial/arpack.html
[eigenValues, eigenVectors] = eigsh(A=Kcsr,
k=numberOfEigenvalues,
M=Mcsr,
which='LM',
sigma=0,
mode='normal')
#sort eigenvalues
eigenValues = np.sort(a=abs(eigenValues))
if convert2Frequencies:
eigenFrequencies = np.sqrt(eigenValues) / (2 * np.pi)
return [eigenFrequencies, eigenVectors]
else:
return [eigenValues, eigenVectors]
def SolveDynamic(
mbs,
simulationSettings=exudyn.SimulationSettings(),
solverType=exudyn.DynamicSolverType.GeneralizedAlpha,
updateInitialValues=False,
storeSolver=True,
showHints=False,
showCausingItems=True,
):
success = False
if (solverType == exudyn.DynamicSolverType.TrapezoidalIndex2
or solverType == exudyn.DynamicSolverType.GeneralizedAlpha):
dynamicSolver = exudyn.MainSolverImplicitSecondOrder()
if storeSolver:
mbs.sys[
'dynamicSolver'] = dynamicSolver #copy solver structure to sys variable
mbs.sys[
'simulationSettings'] = simulationSettings #link to last simulation settings
#if (experimentalNewSolver or #solver flag
# ('experimentalNewSolver' in exudyn.sys)): #flag set in test suite
# dynamicSolver.experimentalUseSolverNew = True #must be set at the very beginning when MainSolverImplicitSecondOrder() is initialized
#store old settings:
newmarkOld = simulationSettings.timeIntegration.generalizedAlpha.useNewmark
index2Old = simulationSettings.timeIntegration.generalizedAlpha.useIndex2Constraints
if solverType == exudyn.DynamicSolverType.TrapezoidalIndex2:
#manually override settings for integrator
simulationSettings.timeIntegration.generalizedAlpha.useNewmark = True
simulationSettings.timeIntegration.generalizedAlpha.useIndex2Constraints = True
stat = exudyn.InfoStat(False)
success = False
try:
success = dynamicSolver.SolveSystem(mbs, simulationSettings)
except:
pass
# print(SolverErrorMessage(dynamicSolver, mbs, isStatic=False, showCausingObjects=showCausingItems,
# showCausingNodes=showCausingItems, showHints=showHints))
#print(dynamicSolver.conv)
# import sys
# sys.exit() #produce no further error messages
#raise ValueError("SolveDynamic terminated due to errors, see messages above")
if not success:
print(
SolverErrorMessage(dynamicSolver,
mbs,
isStatic=False,
showCausingObjects=showCausingItems,
showCausingNodes=showCausingItems,
showHints=showHints))
raise ValueError("SolveDynamic terminated")
CheckSolverInfoStatistics(dynamicSolver.GetSolverName(), stat,
dynamicSolver.it.newtonStepsCount
) #now check if these statistics are ok
#restore old settings:
simulationSettings.timeIntegration.generalizedAlpha.useNewmark = newmarkOld
simulationSettings.timeIntegration.generalizedAlpha.useIndex2Constraints = index2Old
elif (solverType == exudyn.DynamicSolverType.ExplicitEuler
or solverType == exudyn.DynamicSolverType.ExplicitMidpoint
or solverType == exudyn.DynamicSolverType.RK33
or solverType == exudyn.DynamicSolverType.RK44
or solverType == exudyn.DynamicSolverType.RK67
or solverType == exudyn.DynamicSolverType.ODE23
or solverType == exudyn.DynamicSolverType.DOPRI5):
simulationSettings.timeIntegration.explicitIntegration.dynamicSolverType = solverType
dynamicSolver = exudyn.MainSolverExplicit()
if storeSolver:
mbs.sys[
'dynamicSolver'] = dynamicSolver #copy solver structure to sys variable
mbs.sys[
'simulationSettings'] = simulationSettings #link to last simulation settings
stat = exudyn.InfoStat(False)
success = dynamicSolver.SolveSystem(mbs, simulationSettings)
CheckSolverInfoStatistics(dynamicSolver.GetSolverName(), stat,
dynamicSolver.it.currentStepIndex *
dynamicSolver.GetNumberOfStages()
) #now check if these statistics are ok
else:
raise ValueError("SolveDynamic: solver type not implemented: ",
solverType)
if updateInitialValues:
currentState = mbs.systemData.GetSystemState() #get current values
mbs.systemData.SetSystemState(
systemStateList=currentState,
configuration=exudyn.ConfigurationType.Initial)
mbs.systemData.SetODE2Coordinates_tt(
coordinates=mbs.systemData.GetODE2Coordinates_tt(),
configuration=exudyn.ConfigurationType.Initial)
return success
def ParameterFunction(parameterSet):
SC = exu.SystemContainer()
mbs = SC.AddSystem()
#default values
mass = 1.6 #mass in kg
spring = 4000 #stiffness of spring-damper in N/m
damper = 8 #old: 8; damping constant in N/(m/s)
u0 = -0.08 #initial displacement
v0 = 1 #initial velocity
force = 80 #force applied to mass
#process parameters
if 'mass' in parameterSet:
mass = parameterSet['mass']
if 'spring' in parameterSet:
spring = parameterSet['spring']
if 'force' in parameterSet:
force = parameterSet['force']
iCalc = 'Ref' #needed for parallel computation ==> output files are different for every computation
if 'computationIndex' in parameterSet:
iCalc = str(parameterSet['computationIndex'])
#print("computation index=",iCalc, flush=True)
# else:
# print("***********************\nfailed: computationIndex\n***********************\n")
#mass-spring-damper system
L = 0.5 #spring length (for drawing)
# x0=force/spring #static displacement
# print('resonance frequency = '+str(np.sqrt(spring/mass)))
# print('static displacement = '+str(x0))
#node for 3D mass point:
n1 = mbs.AddNode(
Point(referenceCoordinates=[L, 0, 0],
initialCoordinates=[u0, 0, 0],
initialVelocities=[v0, 0, 0]))
#ground node
nGround = mbs.AddNode(NodePointGround(referenceCoordinates=[0, 0, 0]))
#add mass point (this is a 3D object with 3 coordinates):
massPoint = mbs.AddObject(MassPoint(physicsMass=mass, nodeNumber=n1))
#marker for ground (=fixed):
groundMarker = mbs.AddMarker(
MarkerNodeCoordinate(nodeNumber=nGround, coordinate=0))
#marker for springDamper for first (x-)coordinate:
nodeMarker = mbs.AddMarker(
MarkerNodeCoordinate(nodeNumber=n1, coordinate=0))
#spring-damper between two marker coordinates
nC = mbs.AddObject(
CoordinateSpringDamper(markerNumbers=[groundMarker, nodeMarker],
stiffness=spring,
damping=damper))
#add load:
mbs.AddLoad(LoadCoordinate(markerNumber=nodeMarker, load=force))
#add sensor:
sensorFileName = 'solution/paramVarDisplacement' + iCalc + '.txt'
mbs.AddSensor(
SensorObject(objectNumber=nC,
fileName=sensorFileName,
outputVariableType=exu.OutputVariableType.Displacement))
#print("sensorFileName",sensorFileName)
#print(mbs)
mbs.Assemble()
steps = 1000 #number of steps to show solution
tEnd = 1 #end time of simulation
simulationSettings = exu.SimulationSettings()
#simulationSettings.solutionSettings.solutionWritePeriod = 5e-3 #output interval general
simulationSettings.solutionSettings.writeSolutionToFile = False
simulationSettings.solutionSettings.sensorsWritePeriod = 2e-3 #output interval of sensors
simulationSettings.timeIntegration.numberOfSteps = steps
simulationSettings.timeIntegration.endTime = tEnd
simulationSettings.timeIntegration.generalizedAlpha.spectralRadius = 1 #no damping
#exu.StartRenderer() #start graphics visualization
#mbs.WaitForUserToContinue() #wait for pressing SPACE bar to continue
#start solver:
exu.SolveDynamic(mbs, simulationSettings)
#SC.WaitForRenderEngineStopFlag()#wait for pressing 'Q' to quit
#exu.StopRenderer() #safely close rendering window!
# #evaluate final (=current) output values
# u = mbs.GetNodeOutput(n1, exu.OutputVariableType.Position)
# print('displacement=',u)
#+++++++++++++++++++++++++++++++++++++++++++++++++++++
#evaluate difference between reference and optimized solution
#reference solution:
dataRef = np.loadtxt('solution/paramVarDisplacementRef.txt',
comments='#',
delimiter=',')
data = np.loadtxt(sensorFileName, comments='#', delimiter=',')
# s = 50 #shift, for testing what happens if signal has phase-shift
# dataRef[0:-s] = dataRef[s:]
if not useFFTfitness:
diff = data[:, 1] - dataRef[:, 1]
errorNorm = np.sqrt(np.dot(diff, diff)) / steps * tEnd
#+++++++++++++++++++++++++++++++++++++++++++++++++++++
#draw solution (not during optimization!):
if False:
import matplotlib.pyplot as plt
from matplotlib import ticker
#plt.close('all')
plt.plot(data[:, 0], data[:, 1], 'b-', label='displacement (m)')
ax = plt.gca() # get current axes
ax.grid(True, 'major', 'both')
ax.xaxis.set_major_locator(ticker.MaxNLocator(10))
ax.yaxis.set_major_locator(ticker.MaxNLocator(10))
plt.legend() #show labels as legend
plt.tight_layout()
plt.show()
else:
from exudyn.signal import ComputeFFT
tvec = data[:, 0]
uvec = data[:, 1]
tvecRef = dataRef[:, 0]
uvecRef = dataRef[:, 1]
[freq, mag, phase] = ComputeFFT(tvec, uvec)
[freqRef, magRef, phaseRef] = ComputeFFT(tvecRef, uvecRef)
diff = mag - magRef
#diff = np.log(abs(mag)) - np.log(abs(magRef)) #does not improve convergence
nMag = len(mag)
fRange = freq[-1] - freq[
0] #use frequency range for better reference value
# avrgLength = 51
# def runningMeanFast(x, N):
# return np.convolve(x, np.ones((N,))/N)[(N-1):]
# mag = runningMeanFast(mag, avrgLength)
# magRef = runningMeanFast(magRef, avrgLength)
errorNorm = np.sqrt(np.dot(diff, diff)) / nMag * fRange
# sumV = 0
# p = 2 #higher coefficient has no effect
# for v in diff:
# sumV += v**p
# errorNorm = (sumV**(1/p))/nMag*fRange #higher weight to peaks
# #convolution does not work well:
# sumV = 0
# for i in range(20,len(mag)-5):
# #sumV += -mag[i]*magRef[i]
# sumV += -np.log(abs(mag[i])) * np.log(abs(magRef[i]))
# errorNorm = sumV/nMag*fRange #higher weight to peaks
#+++++++++++++++++++++++++++++++++++++++++++++++++++++
#draw solution (not during optimization!):
if False:
from exudyn.plot import PlotFFT
PlotFFT(freq, mag, label='freq') #, logScaleY=False)
PlotFFT(freqRef, magRef, label='freqRef') #, logScaleY=False)
if True: #delete files; does not work for parallel, consecutive operation
if iCalc != 'Ref':
os.remove(sensorFileName) #remove files in order to clean up
while (os.path.exists(sensorFileName)
): #wait until file is really deleted -> usually some delay
sleep(0.001) #not nice, but there is no other way than that
del mbs
del SC
return errorNorm
def ParameterFunction(parameterSet):
s1=L1*0.5
s2=L2*0.5
if False:
s1 = s1opt
s2 = s2opt
if 's1' in parameterSet:
s1 = parameterSet['s1']
h=0.002
if 'h' in parameterSet:
h = parameterSet['h']
if 's2' in parameterSet:
s2 = parameterSet['s2']
iCalc = 'Ref' #needed for parallel computation ==> output files are different for every computation
if 'computationIndex' in parameterSet:
iCalc = str(parameterSet['computationIndex'])
#print("computation index=",iCalc, flush=True)
SC = exu.SystemContainer()
mbs = SC.AddSystem()
testCases = 1 #floating body
nGround = mbs.AddNode(NodePointGround(referenceCoordinates=[0,0,0])) #ground node for coordinate constraint
mGround = mbs.AddMarker(MarkerNodeCoordinate(nodeNumber = nGround, coordinate=0)) #Ground node ==> no action
#++++++++++++++++++++++++++++++++
#floating body to mount slider-crank mechanism
constrainGroundBody = (testCases == 0) #use this flag to fix ground body
#graphics for floating frame:
gFloating = GraphicsDataOrthoCube(-0.25, -0.25, -0.1, 0.8, 0.25, -0.05, color=[0.3,0.3,0.3,1.])
if constrainGroundBody:
floatingRB = mbs.AddObject(ObjectGround(referencePosition=[0,0,0], visualization=VObjectGround(graphicsData=[gFloating])))
mFloatingN = mbs.AddMarker(MarkerBodyPosition(bodyNumber = floatingRB, localPosition=[0,0,0]))
else:
nFloating = mbs.AddNode(Rigid2D(referenceCoordinates=[0,0,0], initialVelocities=[0,0,0]));
mFloatingN = mbs.AddMarker(MarkerNodePosition(nodeNumber=nFloating))
floatingRB = mbs.AddObject(RigidBody2D(physicsMass=2, physicsInertia=1, nodeNumber=nFloating, visualization=VObjectRigidBody2D(graphicsData=[gFloating])))
mRB0 = mbs.AddMarker(MarkerNodeCoordinate(nodeNumber = nFloating, coordinate=0))
mRB1 = mbs.AddMarker(MarkerNodeCoordinate(nodeNumber = nFloating, coordinate=1))
mRB2 = mbs.AddMarker(MarkerNodeCoordinate(nodeNumber = nFloating, coordinate=2))
#add spring dampers for reference frame:
k=5000 #stiffness of floating body
d=k*0.01
mbs.AddObject(CoordinateSpringDamper(markerNumbers=[mGround,mRB0], stiffness=k, damping=d))
mbs.AddObject(CoordinateSpringDamper(markerNumbers=[mGround,mRB1], stiffness=k, damping=d))
mbs.AddObject(CoordinateSpringDamper(markerNumbers=[mGround,mRB2], stiffness=k, damping=d))
mbs.AddObject(CoordinateConstraint(markerNumbers=[mGround,mRB2]))
#++++++++++++++++++++++++++++++++
#nodes and bodies
omega=2*pi/60*300 #3000 rpm
M=0.1 #torque (default: 0.1)
s1L=-s1
s1R=L1-s1
s2L=-s2
s2R=L2-s2
#lambda=L1/L2
J1=(m1/12.)*L1**2 #inertia w.r.t. center of mass
J2=(m2/12.)*L2**2 #inertia w.r.t. center of mass
ty = 0.05 #thickness
tz = 0.05 #thickness
graphics1 = GraphicsDataRigidLink(p0=[s1L,0,-0.5*tz],p1=[s1R,0,-0.5*tz],
axis0=[0,0,1], axis1=[0,0,1],radius=[0.5*ty,0.5*ty],
thickness=0.8*ty, width=[tz,tz], color=color4steelblue,nTiles=16)
graphics2 = GraphicsDataRigidLink(p0=[s2L,0,0.5*tz],p1=[s2R,0,0.5*tz],
axis0=[0,0,1], axis1=[0,0,1],radius=[0.5*ty,0.5*ty],
thickness=0.8*ty, width=[tz,tz], color=color4lightred,nTiles=16)
#crank:
nRigid1 = mbs.AddNode(Rigid2D(referenceCoordinates=[s1,0,0],
initialVelocities=[0,0,0]));
oRigid1 = mbs.AddObject(RigidBody2D(physicsMass=m1,
physicsInertia=J1,
nodeNumber=nRigid1,
visualization=VObjectRigidBody2D(graphicsData= [graphics1])))
#connecting rod:
nRigid2 = mbs.AddNode(Rigid2D(referenceCoordinates=[L1+s2,0,0],
initialVelocities=[0,0,0]));
oRigid2 = mbs.AddObject(RigidBody2D(physicsMass=m2,
physicsInertia=J2,
nodeNumber=nRigid2,
visualization=VObjectRigidBody2D(graphicsData= [graphics2])))
#++++++++++++++++++++++++++++++++
#slider:
c=0.025 #dimension of mass
graphics3 = GraphicsDataOrthoCube(-c,-c,-c*2,c,c,0,color4grey)
#nMass = mbs.AddNode(Point2D(referenceCoordinates=[L1+L2,0]))
#oMass = mbs.AddObject(MassPoint2D(physicsMass=m3, nodeNumber=nMass,visualization=VObjectMassPoint2D(graphicsData= [graphics3])))
nMass = mbs.AddNode(Rigid2D(referenceCoordinates=[L1+L2,0,0]))
oMass = mbs.AddObject(RigidBody2D(physicsMass=m3, physicsInertia=0.001*m3, nodeNumber=nMass,visualization=VObjectRigidBody2D(graphicsData= [graphics3])))
#++++++++++++++++++++++++++++++++
#markers for joints:
mR1Left = mbs.AddMarker(MarkerBodyRigid(bodyNumber=oRigid1, localPosition= [s1L,0.,0.])) #support point # MUST be a rigidBodyMarker, because a torque is applied
mR1Right = mbs.AddMarker(MarkerBodyPosition(bodyNumber=oRigid1, localPosition=[s1R,0.,0.])) #end point; connection to connecting rod
mR2Left = mbs.AddMarker(MarkerBodyPosition(bodyNumber=oRigid2, localPosition= [s2L,0.,0.])) #connection to crank
mR2Right = mbs.AddMarker(MarkerBodyPosition(bodyNumber=oRigid2, localPosition=[s2R,0.,0.])) #end point; connection to slider
mMass = mbs.AddMarker(MarkerBodyPosition(bodyNumber=oMass, localPosition=[ 0.,0.,0.]))
mG0 = mFloatingN
#++++++++++++++++++++++++++++++++
#joints:
mbs.AddObject(RevoluteJoint2D(markerNumbers=[mG0,mR1Left]))
mbs.AddObject(RevoluteJoint2D(markerNumbers=[mR1Right,mR2Left]))
mbs.AddObject(RevoluteJoint2D(markerNumbers=[mR2Right,mMass]))
#prismatic joint:
mRigidGround = mbs.AddMarker(MarkerBodyRigid(bodyNumber = floatingRB, localPosition = [L1+L2,0,0]))
mRigidSlider = mbs.AddMarker(MarkerBodyRigid(bodyNumber = oMass, localPosition = [0,0,0]))
mbs.AddObject(PrismaticJoint2D(markerNumbers=[mRigidGround,mRigidSlider], constrainRotation=True))
#user function for load; switch off load after 1 second
userLoadOn = True
def userLoad(mbs, t, load):
setLoad = 0
if userLoadOn:
setLoad = load
omega = mbs.GetNodeOutput(nRigid1,variableType = exu.OutputVariableType.AngularVelocity)[2]
if omega > 2*pi*2:
#print("t=",t)
userLoadOn = False
return setLoad
#loads and driving forces:
mRigid1CoordinateTheta = mbs.AddMarker(MarkerNodeCoordinate(nodeNumber = nRigid1, coordinate=2)) #angle coordinate is constrained
#mbs.AddLoad(LoadCoordinate(markerNumber=mRigid1CoordinateTheta, load = M, loadUserFunction=userLoad)) #torque at crank
mbs.AddLoad(LoadCoordinate(markerNumber=mRigid1CoordinateTheta, load = M)) #torque at crank
#write motion of support frame:
sensorFileName = 'solution/floatingPos'+iCalc+'.txt'
sFloating = mbs.AddSensor(SensorNode(nodeNumber=nFloating, fileName=sensorFileName,
outputVariableType=exu.OutputVariableType.Position))
#++++++++++++++++++++++++++++++++
#assemble, adjust settings and start time integration
mbs.Assemble()
simulationSettings = exu.SimulationSettings() #takes currently set values or default values
tEnd = 3
simulationSettings.timeIntegration.numberOfSteps = int(tEnd/h)
simulationSettings.timeIntegration.endTime = tEnd
#simulationSettings.timeIntegration.newton.relativeTolerance = 1e-8 #10000
#simulationSettings.timeIntegration.verboseMode = 1 #10000
simulationSettings.solutionSettings.solutionWritePeriod = 2e-3
simulationSettings.solutionSettings.writeSolutionToFile = useGraphics
simulationSettings.timeIntegration.newton.useModifiedNewton = True
simulationSettings.timeIntegration.newton.relativeTolerance = 1e-8
simulationSettings.timeIntegration.newton.absoluteTolerance = 1e-8
#++++++++++++++++++++++++++++++++++++++++++
#solve index 2 / trapezoidal rule:
simulationSettings.timeIntegration.generalizedAlpha.useNewmark = True
simulationSettings.timeIntegration.generalizedAlpha.useIndex2Constraints = True
dSize = 0.02
SC.visualizationSettings.nodes.defaultSize = dSize
SC.visualizationSettings.markers.defaultSize = dSize
SC.visualizationSettings.bodies.defaultSize = [dSize, dSize, dSize]
SC.visualizationSettings.connectors.defaultSize = dSize
#data obtained from SC.GetRenderState(); use np.round(d['modelRotation'],4)
SC.visualizationSettings.openGL.initialModelRotation = [[ 0.87758, 0.04786, -0.47703],
[ 0. , 0.995 , 0.09983],
[ 0.47943, -0.08761, 0.8732]]
SC.visualizationSettings.openGL.initialZoom = 0.47
SC.visualizationSettings.openGL.initialCenterPoint = [0.192, -0.0039,-0.075]
SC.visualizationSettings.openGL.initialMaxSceneSize = 0.4
SC.visualizationSettings.general.autoFitScene = False
#mbs.WaitForUserToContinue()
if useGraphics:
exu.StartRenderer()
exu.SolveDynamic(mbs, simulationSettings)
if useGraphics:
#+++++++++++++++++++++++++++++++++++++
#animate solution
# mbs.WaitForUserToContinue
# fileName = 'coordinatesSolution.txt'
# solution = LoadSolutionFile('coordinatesSolution.txt')
# AnimateSolution(mbs, solution, 10, 0.025, True)
#+++++++++++++++++++++++++++++++++++++
SC.WaitForRenderEngineStopFlag()
exu.StopRenderer() #safely close rendering window!
#++++++++++++++++++++++++++++++++++++++++++
#evaluate error:
data = np.loadtxt(sensorFileName, comments='#', delimiter=',')
errorNorm = max(abs(data[:,1])) + max(abs(data[:,2])) #max displacement in x and y direction
#++++++++++++++++++++++++++++++++++++++++++
#clean up optimization
if True: #delete files; does not work for parallel, consecutive operation
if iCalc != 'Ref':
os.remove(sensorFileName) #remove files in order to clean up
while(os.path.exists(sensorFileName)): #wait until file is really deleted -> usually some delay
sleep(0.001) #not nice, but there is no other way than that
if useGraphics:
print("max. oszillation=", errorNorm)
from exudyn.plot import PlotSensor
PlotSensor(mbs, sensorNumbers=[sFloating,sFloating], components=[0,1])
del mbs
del SC
return errorNorm