def hardware2(gcodeSender, config, log, eeprom, factory):
"""
Rev2: June 2015 - August 2015
- Simplified Feeder (Removed the disengagement and engagement procedure), if you want you can update it easily following this Tutorial: Feeder update.
- Bowden tube improvement (Added a protection external sleeve to avoid the bowden tube get stuck in the back panel).
- Endstops logic inverted.
"""
#invert x endstop logic
gcodeSender.send("M747 X1", group='bootstrap')
#set maximum feedrate
gcodeSender.send("M203 X250.00 Y250.00 Z15.00", group='bootstrap')
# default XY Step
gcodeSender.send("M92 X72.58 Y72.58", group='bootstrap')
config.set('settings', 'hardware.id', 2)
config.set('settings', 'feeder.engage', True)
config.set('settings', 'feeder.available', True)
config.set('settings', 'hardware.camera.available', True)
config.set('settings', 'scan.available', True)
config.save('settings')
if config.is_firstboot():
feeder = loadFactoryFeeder(config)
updateFactoryFeeder(config, feeder)
config.save_feeder_info('built_in_feeder', feeder)
log.info("Rev2")
def hardware5(gcodeSender, config, log, eeprom, factory):
"""
Rev5(CORE): Oct 2016 - xxx
- RPi3
"""
#invert x endstop logic
gcodeSender.send("M747 X1", group='bootstrap')
#set maximum feedrate
gcodeSender.send("M203 X250.00 Y250.00 Z15.00", group='bootstrap')
# default XY Step
gcodeSender.send("M92 X72.58 Y72.58", group='bootstrap')
#save settings
config.set('settings', 'hardware.id', 5)
config.set('settings', 'feeder.engage', False)
config.set('settings', 'feeder.available', True)
config.set('settings', 'hardware.camera.available', True)
config.set('settings', 'scan.available', True)
config.save('settings')
if config.is_firstboot():
feeder = loadFactoryFeeder(config)
updateFactoryFeeder(config, feeder)
config.save_feeder_info('built_in_feeder', feeder)
log.info("Rev5")
def hardware3(gcodeSender, config, log, eeprom, factory):
"""
Rev3: Aug 2015 - Jan 2016
- Back panel modified to minimize bowden tube collisions
- Hotplate V2 as standard duty hotplate
- Reed sensor (Contactless sensor for the frontal door)
- Head V1 (hybrid) discontinued
- Milling Head V2 (store.fabtotum.com/eu/store/milling-head-v2.html).
- Print head V2 (store.fabtotum.com/eu/store/printing-head-v2.html).
"""
#invert x endstop logic
gcodeSender.send("M747 X1", group='bootstrap')
#set maximum feedrate
gcodeSender.send("M203 X250.00 Y250.00 Z15.00", group='bootstrap')
# default XY Step
gcodeSender.send("M92 X72.58 Y72.58", group='bootstrap')
config.set('settings', 'hardware.id', 3)
config.set('settings', 'feeder.engage', False)
config.set('settings', 'feeder.available', True)
config.set('settings', 'hardware.camera.available', True)
config.set('settings', 'scan.available', True)
config.save('settings')
if config.is_firstboot():
feeder = loadFactoryFeeder(config)
updateFactoryFeeder(config, feeder)
config.save_feeder_info('built_in_feeder', feeder)
log.info("Rev3")
def hardware2500(gcodeSender, config, log, eeprom, factory):
"""
Rev2500 CORE PRO with mobile built-in feeder installed
"""
log.info("Rev2500 - PRO")
defaultProSettings(gcodeSender, config, log, eeprom, factory)
config.set('settings', 'hardware.id', 2500)
config.set('settings', 'feeder.engage', False)
config.set('settings', 'feeder.available', True)
if config.is_firstboot():
feeder = loadFactoryFeeder(config)
updateFactoryFeeder(config, feeder)
config.save_feeder_info('built_in_feeder', feeder)
config.save('settings')
def hardware1(gcodeSender, config, log, eeprom, factory):
"""
Rev1: September 2014 - May 2015
- Original FABtotum
"""
gcodeSender.send("M203 X250.00 Y250.00 Z15.00", group='bootstrap')
# default XY Step
gcodeSender.send("M92 X72.58 Y72.58", group='bootstrap')
config.set('settings', 'hardware.id', 1)
config.set('settings', 'feeder.engage', True)
config.set('settings', 'feeder.available', True)
config.set('settings', 'scan.available', True)
config.set('settings', 'hardware.camera.available', True)
config.save('settings')
if config.is_firstboot():
feeder = loadFactoryFeeder(config)
updateFactoryFeeder(config, feeder)
config.save_feeder_info('built_in_feeder', feeder)
log.info("Rev1")
