def test_check_event_fiduciality():
fid_dimensions = VolumeDim(z_min=10. * units.mm,
z_max=90. * units.mm,
rad=90. * units.mm)
min_VetoE = 8. * units.keV
# Check 1: All voxels inside the fiducial volume
Voxels = [
Voxel(x=20., y=20., z=20., E=5. * units.keV, size=(10., 10., 10.)),
Voxel(x=30., y=30., z=50., E=10. * units.keV, size=(10., 10., 10.)),
Voxel(x=40., y=30., z=80., E=20. * units.keV, size=(10., 10., 10.))
]
minZ, maxZ, maxRad = 20., 80., 50.
vetoE = 0.
fiducial = True
assert (minZ, maxZ, maxRad, vetoE, fiducial) == \
check_event_fiduciality(Voxels, fid_dimensions, min_VetoE)
# Check 2: Energy in veto lower than threshold
Voxels = [
Voxel(x=20., y=20., z=5., E=5. * units.keV, size=(10., 10., 10.)),
Voxel(x=30., y=30., z=50., E=10. * units.keV, size=(10., 10., 10.)),
Voxel(x=40., y=30., z=80., E=20. * units.keV, size=(10., 10., 10.))
]
minZ, maxZ, maxRad = 5., 80., 50.
vetoE = 5. * units.keV
fiducial = True
assert (minZ, maxZ, maxRad, vetoE, fiducial) == \
check_event_fiduciality(Voxels, fid_dimensions, min_VetoE)
# Check 3: Energy in veto higher than threshold
Voxels = [
Voxel(x=20., y=20., z=20., E=5. * units.keV, size=(10., 10., 10.)),
Voxel(x=30., y=30., z=50., E=10. * units.keV, size=(10., 10., 10.)),
Voxel(x=40., y=30., z=95., E=20. * units.keV, size=(10., 10., 10.))
]
minZ, maxZ, maxRad = 20., 95., 50.
vetoE = 20. * units.keV
fiducial = False
assert (minZ, maxZ, maxRad, vetoE, fiducial) == \
check_event_fiduciality(Voxels, fid_dimensions, min_VetoE)
hit for hit in active_smHits if hit.Z < ACTIVE_ZMAX
]
# Voxelizing using the active_smHits ...
event_voxels = voxelize_hits(active_smHits,
voxel_size,
strict_voxel_size=True)
eff_voxel_size = event_voxels[0].size
# Storing voxels info
for voxel in event_voxels:
extend_voxels_reco_data(voxels_dict, event_number, voxel)
# Check fiduciality
voxels_minZ, voxels_maxZ, voxels_maxRad, veto_energy, fiducial_filter = \
check_event_fiduciality(event_voxels, FID_minZ, FID_maxZ, FID_maxRAD,
MIN_VETO_ENERGY)
# Storing data of NON smE_filter vents
extend_events_reco_data(events_dict,
event_number,
evt_num_MChits=num_hits,
evt_mcE=event_mcE,
evt_smE=event_smE,
evt_smE_filter=event_smE_filter,
evt_num_voxels=len(event_voxels),
evt_voxel_sizeX=eff_voxel_size[0],
evt_voxel_sizeY=eff_voxel_size[1],
evt_voxel_sizeZ=eff_voxel_size[2],
evt_voxels_minZ=voxels_minZ,
evt_voxels_maxZ=voxels_maxZ,
evt_voxels_maxRad=voxels_maxRad,
def test_check_event_fiduciality():
### General data for checks of assymetric detectors
detname = DetName.next100
veto_width = 20. * units.mm
min_VetoE = 3. * units.keV
# Check 1: All voxels inside the fiducial volume
voxels = [
Voxel(x=20., y=20., z=30., E=5. * units.keV, size=(10., 10., 10.)),
Voxel(x=30., y=30., z=150., E=10. * units.keV, size=(10., 10., 10.)),
Voxel(x=40., y=30., z=80., E=20. * units.keV, size=(10., 10., 10.))
]
minZ, maxZ, maxRad = 30., 150., 50.
vetoE = 0.
fiducial = True
assert (minZ, maxZ, maxRad, vetoE, fiducial) == \
check_event_fiduciality(detname, veto_width, min_VetoE, voxels)
# Check 2: Energy in veto lower than threshold
voxels = [
Voxel(x=20., y=20., z=5., E=1. * units.keV, size=(10., 10., 10.)),
Voxel(x=30., y=30., z=150., E=10. * units.keV, size=(10., 10., 10.)),
Voxel(x=40., y=30., z=80., E=20. * units.keV, size=(10., 10., 10.))
]
minZ, maxZ, maxRad = 5., 150., 50.
vetoE = 1. * units.keV
fiducial = True
assert (minZ, maxZ, maxRad, vetoE, fiducial) == \
check_event_fiduciality(detname, veto_width, min_VetoE, voxels)
# Check 3: Energy in veto higher than threshold
voxels = [
Voxel(x=20., y=20., z=5., E=17. * units.keV, size=(10., 10., 10.)),
Voxel(x=30., y=30., z=50., E=10. * units.keV, size=(10., 10., 10.)),
Voxel(x=40., y=30., z=95., E=20. * units.keV, size=(10., 10., 10.))
]
minZ, maxZ, maxRad = 5., 95., 50.
vetoE = 17. * units.keV
fiducial = False
assert (minZ, maxZ, maxRad, vetoE, fiducial) == \
check_event_fiduciality(detname, veto_width, min_VetoE, voxels)
### General data for checks of assymetric detectors
detname = DetName.next500
veto_width = 20. * units.mm
min_VetoE = 3. * units.keV
# Check 4: All voxels inside the fiducial volume
voxels = [
Voxel(x=-200., y=100., z=-30., E=5. * units.keV, size=(10., 10., 10.)),
Voxel(x=0., y=500., z=150., E=10. * units.keV, size=(10., 10., 10.)),
Voxel(x=40., y=130., z=80., E=20. * units.keV, size=(10., 10., 10.))
]
minZ, maxZ, maxRad = -30., 150., 500.
vetoE = 0.
fiducial = True
assert (minZ, maxZ, maxRad, vetoE, fiducial) == \
check_event_fiduciality(detname, veto_width, min_VetoE, voxels)
# Check 5: Energy in central veto higher than threshold
voxels = [
Voxel(x=120., y=220., z=-5., E=17. * units.keV, size=(10., 10., 10.)),
Voxel(x=-30., y=-30., z=180., E=10. * units.keV, size=(10., 10., 10.)),
Voxel(x=0., y=500., z=-95., E=20. * units.keV, size=(10., 10., 10.))
]
minZ, maxZ, maxRad = -95., 180., 500.
vetoE = 17. * units.keV
fiducial = False
assert (minZ, maxZ, maxRad, vetoE, fiducial) == \
check_event_fiduciality(detname, veto_width, min_VetoE, voxels)
def fanal_reco(det_name, # Detector name: 'new', 'next100', 'next500'
event_type, # Event type: 'bb0nu', 'Tl208', 'Bi214'
fwhm, # FWHM at Qbb
e_min, # Minimum smeared energy for energy filtering
e_max, # Maximum smeared energy for energy filtering
voxel_size, # Voxel size (x, y, z)
voxel_Eth, # Voxel energy threshold
veto_width, # Veto width for fiducial filtering
min_veto_e, # Minimum energy in veto for fiducial filtering
files_in, # Input files
event_range, # Range of events to analyze: all, ... ??
file_out, # Output file
compression, # Compression of output file: 'ZLIB1', 'ZLIB4',
# 'ZLIB5', 'ZLIB9', 'BLOSC5', 'BLZ4HC5'
verbosity_level):
### LOGGER
logger = get_logger('FanalReco', verbosity_level)
### DETECTOR NAME & its ACTIVE dimensions
det_name = getattr(DetName, det_name)
ACTIVE_dimensions = get_active_size(det_name)
fid_dimensions = get_fiducial_size(det_name, veto_width)
### RECONSTRUCTION DATA
# Smearing energy settings
fwhm_Qbb = fwhm * Qbb
sigma_Qbb = fwhm_Qbb / 2.355
assert e_max > e_min, 'SmE_filter settings not valid. e_max must be higher than e_min.'
### PRINTING GENERAL INFO
print('\n***********************************************************************************')
print('***** Detector: {}'.format(det_name.name))
print('***** Reconstructing {} events'.format(event_type))
print('***** Energy Resolution: {:.2f}% fwhm at Qbb'.format(fwhm / units.perCent))
print('***** Voxel Size: ({}, {}, {}) mm'.format(voxel_size[0] / units.mm,
voxel_size[1] / units.mm,
voxel_size[2] / units.mm))
print('***********************************************************************************\n')
print('* Sigma at Qbb: {:.3f} keV.\n'.format(sigma_Qbb / units.keV))
print('* Voxel_size: ({}, {}, {}) mm'.format(voxel_size[0] / units.mm,
voxel_size[1] / units.mm,
voxel_size[2] / units.mm))
print(' Voxel Eth: {:4.1f} keV\n'.format(voxel_Eth/units.keV))
print('* Detector-Active dimensions [mm]: Zmin: {:7.1f} Zmax: {:7.1f} Rmax: {:7.1f}'
.format(ACTIVE_dimensions.z_min, ACTIVE_dimensions.z_max,
ACTIVE_dimensions.rad))
print(' ... fiducial limits [mm]: Zmin: {:7.1f} Zmax: {:7.1f} Rmax: {:7.1f}\n'
.format(fid_dimensions.z_min, fid_dimensions.z_max, fid_dimensions.rad))
print('* {0} {1} input files:'.format(len(files_in), event_type))
for iFileName in files_in:
print(' ', iFileName)
### OUTPUT FILE, ITS GROUPS & ATTRIBUTES
# Output file
oFile = tb.open_file(file_out, 'w', filters = tbl_filters(compression))
# Reco group Name
reco_group_name = get_reco_group_name(fwhm/units.perCent, voxel_size)
oFile.create_group('/', 'FANALIC')
oFile.create_group('/FANALIC', reco_group_name[9:])
print('\n* Output file name:', file_out)
print(' Reco group name: {}\n'.format(reco_group_name))
# Attributes
oFile.set_node_attr(reco_group_name, 'input_sim_files', files_in)
oFile.set_node_attr(reco_group_name, 'event_type', event_type)
oFile.set_node_attr(reco_group_name, 'energy_resolution', fwhm/units.perCent)
oFile.set_node_attr(reco_group_name, 'voxel_sizeX', voxel_size[0])
oFile.set_node_attr(reco_group_name, 'voxel_sizeY', voxel_size[1])
oFile.set_node_attr(reco_group_name, 'voxel_sizeZ', voxel_size[2])
oFile.set_node_attr(reco_group_name, 'voxel_Eth', voxel_Eth)
oFile.set_node_attr(reco_group_name, 'smE_filter_Emin', e_min)
oFile.set_node_attr(reco_group_name, 'smE_filter_Emax', e_max)
oFile.set_node_attr(reco_group_name, 'fiducial_filter_VetoWidth', veto_width)
oFile.set_node_attr(reco_group_name, 'fiducial_filter_MinVetoE', min_veto_e)
### DATA TO STORE
# Event counters
simulated_events = 0
stored_events = 0
analyzed_events = 0
toUpdate_events = 1
# Dictionaries for events & voxels data
events_dict = get_events_reco_dict()
voxels_dict = get_voxels_reco_dict()
### RECONSTRUCTION PROCEDURE
# Looping through all the input files
for iFileName in files_in:
# Updating simulated and stored event counters
configuration_df = pd.read_hdf(iFileName, '/MC/configuration', mode='r')
simulated_events += int(configuration_df[configuration_df.param_key == 'num_events'].param_value)
stored_events += int(configuration_df[configuration_df.param_key == 'saved_events'].param_value)
# Getting event numbers
file_extents = pd.read_hdf(iFileName, '/MC/extents', mode='r')
file_event_numbers = file_extents.evt_number
print('* Processing {0} ({1} events) ...'.format(iFileName, len(file_event_numbers)))
# Getting mc hits
file_mcHits = load_mc_hits(iFileName)
# Looping through all the events in iFile
for event_number in file_event_numbers:
# Updating counter of analyzed events
analyzed_events += 1
logger.info('Reconstructing event Id: {0} ...'.format(event_number))
# Getting event data
event_data = get_event_reco_data()
event_data['event_id'] = event_number
event_mcHits = file_mcHits.loc[event_number, :]
active_mcHits = event_mcHits[event_mcHits.label == 'ACTIVE'].copy()
event_data['num_MCparts'] = get_num_mc_particles(file_extents, event_number)
event_data['num_MChits'] = len(active_mcHits)
# The event mc energy is the sum of the energy of all the hits except
# for Bi214 events, in which the number of S1 in the event is considered
if (event_type == 'Bi214'):
event_data['mcE'] = get_mc_energy(active_mcHits)
else:
event_data['mcE'] = active_mcHits.E.sum()
# Smearing the event energy
event_data['smE'] = smear_evt_energy(event_data['mcE'], sigma_Qbb, Qbb)
# Applying the smE filter
event_data['smE_filter'] = (e_min <= event_data['smE'] <= e_max)
# Verbosing
logger.info(' Num mcHits: {0:3} mcE: {1:.1f} keV smE: {2:.1f} keV smE_filter: {3}' \
.format(event_data['num_MChits'], event_data['mcE']/units.keV,
event_data['smE']/units.keV, event_data['smE_filter']))
# For those events passing the smE filter:
if event_data['smE_filter']:
# Smearing hit energies
smearing_factor = event_data['smE'] / event_data['mcE']
active_mcHits['smE'] = active_mcHits['E'] * smearing_factor
# Translating hit Z positions from delayed hits
translate_hit_positions(det_name, active_mcHits, DRIFT_VELOCITY)
# Creating the IChits with the smeared energies and translated Z positions
# to be passed to paolina functions
#IChits = []
#for i, hit in active_mcHits[active_mcHits.shifted_z < ACTIVE_dimensions.z_max].iterrows():
# IChit = MCHit((hit.x, hit.y, hit.shifted_z), hit.time, hit.smE, 'ACTIVE')
# IChits.append(IChit)
IChits = active_mcHits[(active_mcHits.shifted_z < ACTIVE_dimensions.z_max) &
(active_mcHits.shifted_z > ACTIVE_dimensions.z_min)] \
.apply(lambda hit: MCHit((hit.x, hit.y, hit.shifted_z),
hit.time, hit.smE, 'ACTIVE'), axis=1).tolist()
# Voxelizing using the IChits ...
event_voxels = voxelize_hits(IChits, voxel_size, strict_voxel_size=False)
event_data['num_voxels'] = len(event_voxels)
eff_voxel_size = event_voxels[0].size
event_data['voxel_sizeX'] = eff_voxel_size[0]
event_data['voxel_sizeY'] = eff_voxel_size[1]
event_data['voxel_sizeZ'] = eff_voxel_size[2]
# Storing voxels info
for voxel_id in range(len(event_voxels)):
extend_voxels_reco_dict(voxels_dict, event_number, voxel_id,
event_voxels[voxel_id], voxel_Eth)
# Check fiduciality
event_data['voxels_minZ'], event_data['voxels_maxZ'], \
event_data['voxels_maxRad'], event_data['veto_energy'], \
event_data['fid_filter'] = \
check_event_fiduciality(det_name, veto_width, min_veto_e, event_voxels)
# Verbosing
logger.info(' NumVoxels: {:3} minZ: {:.1f} mm maxZ: {:.1f} mm maxR: {:.1f} mm veto_E: {:.1f} keV fid_filter: {}' \
.format(event_data['num_voxels'], event_data['voxels_minZ'],
event_data['voxels_maxZ'], event_data['voxels_maxRad'],
event_data['veto_energy'] / units.keV,
event_data['fid_filter']))
for voxel in event_voxels:
logger.debug(' Voxel pos: ({:5.1f}, {:5.1f}, {:5.1f}) mm E: {:5.1f} keV'\
.format(voxel.X/units.mm, voxel.Y/units.mm,
voxel.Z/units.mm, voxel.E/units.keV))
# Storing event_data
extend_events_reco_dict(events_dict, event_data)
# Verbosing
if (not(analyzed_events % toUpdate_events)):
print('* Num analyzed events: {}'.format(analyzed_events))
if (analyzed_events == (10 * toUpdate_events)): toUpdate_events *= 10
### STORING RECONSTRUCTION DATA
# Storing events and voxels dataframes
print('\n* Storing data in the output file: {}'.format(file_out))
store_events_reco_dict(file_out, reco_group_name, events_dict)
store_voxels_reco_dict(file_out, reco_group_name, voxels_dict)
# Storing event counters as attributes
smE_filter_events = sum(events_dict['smE_filter'])
fid_filter_events = sum(events_dict['fid_filter'])
store_events_reco_counters(oFile, reco_group_name, simulated_events,
stored_events, smE_filter_events, fid_filter_events)
oFile.close()
print('* Reconstruction done !!\n')
# Printing reconstruction numbers
print('* Event counters ...')
print(''' Simulated events: {0:9}
Stored events: {1:9}
smE_filter events: {2:9}
fid_filter events: {3:9}\n'''
.format(simulated_events, stored_events, smE_filter_events, fid_filter_events))
def fanal_reco(
det_name, # Detector name: 'new', 'next100', 'next500'
event_type, # Event type: 'bb0nu', 'Tl208', 'Bi214'
fwhm, # FWHM at Qbb
e_min, # Minimum smeared energy for energy filtering
e_max, # Maximum smeared energy for energy filtering
spatial_def, # Spatial definition: 'low', 'high'
veto_width, # Veto width for fiducial filtering
min_veto_e, # Minimum energy in veto for fiducial filtering
files_in, # Input files
event_range, # Range of events to analyze: all, ... ??
file_out, # Output file
compression, # Compression of output file: 'ZLIB1', 'ZLIB4',
# 'ZLIB5', 'ZLIB9', 'BLOSC5', 'BLZ4HC5'
verbosity_level):
### LOGGER
logger = get_logger('FanalReco', verbosity_level)
### DETECTOR NAME & its ACTIVE dimensions
det_name = getattr(DetName, det_name)
ACTIVE_dimensions = get_active_size(det_name)
### RECONSTRUCTION DATA
# Smearing energy settings
fwhm_Qbb = fwhm * Qbb
sigma_Qbb = fwhm_Qbb / 2.355
assert e_max > e_min, 'SmE_filter settings not valid. e_max must be higher than e_min.'
# Spatial definition
spatial_def = getattr(SpatialDef, spatial_def)
# Voxel size
voxel_size = get_voxel_size(spatial_def)
# Fiducial limits
fid_dimensions = get_fiducial_size(ACTIVE_dimensions, veto_width)
### PRINTING GENERAL INFO
print(
'\n***********************************************************************************'
)
print('***** Detector: {}'.format(det_name.name))
print('***** Reconstructing {} events'.format(event_type))
print('***** Energy Resolution: {:.2f}% FWFM at Qbb'.format(fwhm /
units.perCent))
print('***** Spatial definition: {}'.format(spatial_def.name))
print(
'***********************************************************************************\n'
)
print(
'* Detector-Active dimensions [mm]: Zmin: {:7.1f} Zmax: {:7.1f} Rmax: {:7.1f}'
.format(ACTIVE_dimensions.z_min, ACTIVE_dimensions.z_max,
ACTIVE_dimensions.rad))
print(
' ... fiducial limits [mm]: Zmin: {:7.1f} Zmax: {:7.1f} Rmax: {:7.1f}\n'
.format(fid_dimensions.z_min, fid_dimensions.z_max,
fid_dimensions.rad))
print('* Sigma at Qbb: {:.3f} keV.\n'.format(sigma_Qbb / units.keV))
print('* Voxel_size: {} mm.\n'.format(voxel_size))
print('* {0} {1} input files:'.format(len(files_in), event_type))
for iFileName in files_in:
print(' ', iFileName)
### OUTPUT FILE, ITS GROUPS & ATTRIBUTES
# Output file
oFile = tb.open_file(file_out, 'w', filters=tbl_filters(compression))
# Reco group Name
reco_group_name = get_reco_group_name(fwhm / units.perCent, spatial_def)
oFile.create_group('/', 'FANALIC')
oFile.create_group('/FANALIC', reco_group_name[9:])
print('\n* Output file name:', file_out)
print(' Reco group name: {}\n'.format(reco_group_name))
# Attributes
oFile.set_node_attr(reco_group_name, 'input_sim_files', files_in)
oFile.set_node_attr(reco_group_name, 'event_type', event_type)
oFile.set_node_attr(reco_group_name, 'energy_resolution',
fwhm / units.perCent)
oFile.set_node_attr(reco_group_name, 'smE_filter_Emin', e_min)
oFile.set_node_attr(reco_group_name, 'smE_filter_Emax', e_max)
oFile.set_node_attr(reco_group_name, 'fiducial_filter_VetoWidth',
veto_width)
oFile.set_node_attr(reco_group_name, 'fiducial_filter_MinVetoE',
min_veto_e)
### DATA TO STORE
# Event counters
simulated_events = 0
stored_events = 0
analyzed_events = 0
# Dictionaries for events & voxels data
events_dict = get_events_reco_dict()
voxels_dict = get_voxels_reco_dict()
### RECONSTRUCTION PROCEDURE
# Looping through all the input files
for iFileName in files_in:
# Updating simulated and stored event counters
configuration_df = pd.read_hdf(iFileName,
'/MC/configuration',
mode='r')
simulated_events += int(configuration_df[configuration_df.param_key ==
'num_events'].param_value)
stored_events += int(configuration_df[configuration_df.param_key ==
'saved_events'].param_value)
with tb.open_file(iFileName, mode='r') as iFile:
file_event_numbers = iFile.root.MC.extents.cols.evt_number
print('* Processing {0} ({1} events) ...'.format(
iFileName, len(file_event_numbers)))
# Loading into memory all the particles & hits in the file
file_mcParts = load_mcparticles(iFileName)
file_mcHits = load_mchits(iFileName)
# Looping through all the events in the file
for event_number in file_event_numbers:
# Updating counter of analyzed events
analyzed_events += 1
#if not int(str(analyzed_events)[-int(math.log10(analyzed_events)):]):
# print('* Num analyzed events: {}'.format(analyzed_events))
# Verbosing
logger.info(
'Reconstructing event Id: {0} ...'.format(event_number))
# Getting mcParts of the event, using the event_number as the key
event_mcParts = file_mcParts[event_number]
num_parts = len(event_mcParts)
# Getting mcHits of the event, using the event_number as the key
event_mcHits = file_mcHits[event_number]
active_mcHits = [
hit for hit in event_mcHits if hit.label == 'ACTIVE'
]
num_hits = len(active_mcHits)
# The event mc energy is the sum of the energy of all the hits
event_mcE = sum([hit.E for hit in active_mcHits])
# Smearing the event energy
event_smE = smear_evt_energy(event_mcE, sigma_Qbb, Qbb)
# Applying the smE filter
event_smE_filter = (e_min <= event_smE <= e_max)
# Verbosing
logger.info(
' Num mcHits: {0:3} mcE: {1:.1f} keV smE: {2:.1f} keV smE_filter: {3}'
.format(num_hits, event_mcE / units.keV,
event_smE / units.keV, event_smE_filter))
# For those events NOT passing the smE filter:
# Storing data of NON smE_filter vents
if not event_smE_filter:
extend_events_reco_data(events_dict,
event_number,
evt_num_MCparts=num_parts,
evt_num_MChits=num_hits,
evt_mcE=event_mcE,
evt_smE=event_smE,
evt_smE_filter=event_smE_filter)
# Only for those events passing the smE filter:
else:
# Smearing hit energies
hits_smE = smear_hit_energies(active_mcHits,
event_smE / event_mcE)
# Translating hit positions
hits_transPositions = translate_hit_positions(
active_mcHits, DRIFT_VELOCITY)
# Creating the smHits with the smeared energies and translated positions
active_smHits = []
for i in range(num_hits):
smHit = MCHit(hits_transPositions[i],
active_mcHits[i].time, hits_smE[i],
'ACTIVE')
active_smHits.append(smHit)
# Filtering hits outside the ACTIVE region (due to translation)
active_smHits = [hit for hit in active_smHits \
if hit.Z < ACTIVE_dimensions.z_max]
# Voxelizing using the active_smHits ...
event_voxels = voxelize_hits(active_smHits,
voxel_size,
strict_voxel_size=True)
eff_voxel_size = event_voxels[0].size
# Storing voxels info
for voxel in event_voxels:
extend_voxels_reco_data(voxels_dict, event_number,
voxel)
# Check fiduciality
voxels_minZ, voxels_maxZ, voxels_maxRad, veto_energy, fiducial_filter = \
check_event_fiduciality(event_voxels, fid_dimensions, min_veto_e)
# Storing data of NON smE_filter vents
extend_events_reco_data(events_dict,
event_number,
evt_num_MCparts=num_parts,
evt_num_MChits=num_hits,
evt_mcE=event_mcE,
evt_smE=event_smE,
evt_smE_filter=event_smE_filter,
evt_num_voxels=len(event_voxels),
evt_voxel_sizeX=eff_voxel_size[0],
evt_voxel_sizeY=eff_voxel_size[1],
evt_voxel_sizeZ=eff_voxel_size[2],
evt_voxels_minZ=voxels_minZ,
evt_voxels_maxZ=voxels_maxZ,
evt_voxels_maxRad=voxels_maxRad,
evt_veto_energy=veto_energy,
evt_fid_filter=fiducial_filter)
# Verbosing
logger.info(
' NumVoxels: {:3} minZ: {:.1f} mm maxZ: {:.1f} mm maxR: {:.1f} mm veto_E: {:.1f} keV fid_filter: {}'
.format(len(event_voxels), voxels_minZ, voxels_maxZ,
voxels_maxRad, veto_energy / units.keV,
fiducial_filter))
for voxel in event_voxels:
logger.debug(
' Voxel pos: ({:5.1f}, {:5.1f}, {:5.1f}) mm E: {:5.1f} keV'
.format(voxel.X / units.mm, voxel.Y / units.mm,
voxel.Z / units.mm, voxel.E / units.keV))
### STORING DATA
# Storing events and voxels dataframes
print('\n* Storing data in the output file ...\n {}\n'.format(file_out))
store_events_reco_data(file_out, reco_group_name, events_dict)
store_voxels_reco_data(file_out, reco_group_name, voxels_dict)
# Storing event counters as attributes
smE_filter_events = sum(events_dict['smE_filter'])
fid_filter_events = sum(events_dict['fid_filter'])
store_events_reco_counters(oFile, reco_group_name, simulated_events,
stored_events, smE_filter_events,
fid_filter_events)
oFile.close()
print('* Reconstruction done !!\n')
# Printing reconstruction numbers
print('* Event counters ...')
print(''' Simulated events: {0:9}
Stored events: {1:9}
smE_filter events: {2:9}
fid_filter events: {3:9}\n'''.format(simulated_events, stored_events,
smE_filter_events, fid_filter_events))