def cmd_add_temp(dict_cmd_para=None):
"""
新增FCMM的开发者临时分支，如果原分支存在，可以重置分支
@decorators staticmethod
@param {dict} dict_cmd_para=None - 参数字典
@returns {list} - 执行结果[returncode, msgstring]
returncode - 0代表成功，其他代表失败
msgstring - 要返回显示的内容
"""
# 进行初始化
is_exit, res, config, fcmm_config, repo_info, current_branch = FCMMGitCmd.cmd_common_init(
'add-temp', dict_cmd_para)
if is_exit:
return res
# 进一步检查
branch_name = 'tb-dev-%s' % (FCMMTools.get_cmd_para_value(
dict_cmd_para, '-n', '-name'))
clone_branch_name = FCMMGitTools.get_active_branch(repo_info)
res = FCMMGitTools.get_remote_branch(repo_info, branch_name)
has_branch = False
if res[0] == 0:
has_branch = True
elif not res[2]:
# 远程节点存在但处理失败
res[1] = FCMMTools.get_i18n_tips(config, 'execute_fail')
return res
if not ('-f' in dict_cmd_para.keys()
or '-force' in dict_cmd_para.keys()):
if has_branch:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_has_exists',
branch_name)
]
# 进行处理
para_bare = FCMMTools.get_cmd_para_value(dict_cmd_para, '-b', '-bare')
if has_branch:
if para_bare:
res = FCMMGitTools.overwrite_branch(repo_info,
branch_name,
is_bare=True)
else:
res = FCMMGitTools.overwrite_branch(
repo_info, branch_name, src_branch=clone_branch_name)
else:
if para_bare:
res = FCMMGitTools.add_branch(repo_info,
branch_name,
is_bare=True)
else:
res = FCMMGitTools.add_branch(repo_info,
branch_name,
src_branch=clone_branch_name)
return res
def cmd_merge(dict_cmd_para=None):
"""
将指定分支版本合并到当前分支中
@decorators staticmethod
@param {dict} dict_cmd_para=None - 参数字典
@returns {list} - 执行结果[returncode, msgstring]
returncode - 0代表成功，其他代表失败
msgstring - 要返回显示的内容
"""
# 进行初始化
is_exit, res, config, fcmm_config, repo_info, current_branch = FCMMGitCmd.cmd_common_init(
'merge', dict_cmd_para)
if is_exit:
return res
# 进一步检查
branch_name = FCMMTools.get_cmd_para_value(dict_cmd_para, '-d',
'-dest')
if branch_name is None:
# 获取当前工作分支
branch_name = FCMMGitTools.get_active_branch(repo_info)
else:
# 检查分支是否存在
res = FCMMGitTools.get_remote_branch(repo_info, branch_name)
if res[0] != 0:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_not_exists',
branch_name)
]
source_branch = FCMMTools.get_cmd_para_value(dict_cmd_para, '-s',
'-source')
if source_branch is None:
if fcmm_config['has_pkg'] == 'true':
source_branch = 'lb-pkg'
else:
source_branch = 'master'
else:
# 检查分支是否存在
res = FCMMGitTools.get_remote_branch(repo_info, source_branch)
if res[0] != 0:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_not_exists',
source_branch)
]
# 检查分支是否同一个
if branch_name == source_branch:
return [
1,
FCMMTools.get_i18n_tips(config, 'check_branch_is_same',
source_branch)
]
ver = FCMMTools.get_cmd_para_value(dict_cmd_para, '-v', '-version')
# 检查版本号是否一致
if ver is not None and not FCMMGitTools.check_tag_exists(
repo_info, ver):
return [1, FCMMTools.get_i18n_tips(config, 'tag_not_exists', ver)]
# 获取版本号
tag = FCMMTools.get_cmd_para_value(dict_cmd_para, '-t', '-tag')
def cmd_rollback(dict_cmd_para=None):
"""
将指定分支回退到指定版本
@decorators staticmethod
@param {dict} dict_cmd_para=None - 参数字典
@returns {list} - 执行结果[returncode, msgstring]
returncode - 0代表成功，其他代表失败
msgstring - 要返回显示的内容
"""
# 进行初始化
is_exit, res, config, fcmm_config, repo_info, current_branch = FCMMGitCmd.cmd_common_init(
'rollback', dict_cmd_para)
if is_exit:
return res
# 进一步检查
branch_name = FCMMTools.get_cmd_para_value(dict_cmd_para, '-n',
'-name')
if branch_name is None:
# 获取当前工作分支
branch_name = FCMMGitTools.get_active_branch(repo_info)
else:
# 检查分支是否存在
res = FCMMGitTools.get_remote_branch(repo_info, branch_name)
if res[0] != 0:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_not_exists',
branch_name)
]
# master和lb-pkg分支不允许回退
if not ('-f' in dict_cmd_para.keys()
or '-force' in dict_cmd_para.keys()):
if branch_name == 'master' or branch_name == 'lb-pkg':
return [
1,
FCMMTools.get_i18n_tips(config, 'master_pkg_no_rollback')
]
ver = FCMMTools.get_cmd_para_value(dict_cmd_para, '-v', '-version')
tag = FCMMTools.get_cmd_para_value(dict_cmd_para, '-t', '-tag')
if ver is None and tag is None:
return [
1,
FCMMTools.get_i18n_tips(config, 'must_has_para',
'version / tag')
]
# 进行处理
# 先进行备份
if config['backup_before'] == 'true':
res = FCMMGitTools.backup_branch(
repo_info, branch_name,
FCMMGitTools.get_git_config_user_name(repo_info,
config['consle_encode']))
if res[0] == 0:
# 处理回滚
if branch_name == 'master' or branch_name == 'lb-pkg':
# 采取回滚方式处理
if ver is not None:
res = FCMMGitTools.rollback_to_tag(repo_info, branch_name,
ver)
else:
res = FCMMGitTools.rollback_to_commit(
repo_info, branch_name, tag)
else:
# 采取覆盖方式处理
src_branch = 'master'
if fcmm_config['has_pkg'] == 'true':
src_branch = 'lb-pkg'
res = FCMMGitTools.overwrite_branch(repo_info,
branch_name,
src_branch,
tag=ver,
commit=tag)
# 返回结果
return res
def cmd_common_init(cmd_str='', dict_cmd_para=None):
"""
通用命令前期通用处理
具体处理的内容包括：
1、判断是否帮助
2、基础参数校验
3、检查当前环境是否未提交，如果未提交不允许继续处理
4、检查本地配置文件及仓库信息是否准确
5、更新master分支和lb-pkg分支的最新本地版本
@decorators staticmethod
@param {dict} dict_cmd_para=None - 参数字典
@returns {tuple} - 返回多个值的数组，按顺序如下
is_exit {bool} - 标识是否应直接，不进行后续的处理
return_obj {list} - 直接退出的执行结果[returncode, msgstring]
returncode - 0代表成功，其他代表失败
msgstring - 要返回显示的内容
config {dict} - 获取到的全局参数config
fcmm_config {dict} - 获取到的.fcmm4git配置信息
repo_info {dict} - 获取到的本地仓库信息
current_branch {string} - 当前本地工作分支
"""
# 判断是否有帮助
if '-h' in dict_cmd_para.keys() or '-help' in dict_cmd_para.keys():
return (True, FCMMGitCmd.cmd_help({cmd_str:
''}), None, None, None, None)
# 最基础的参数校验
res = FCMMTools.vailidate_cmd_para(dict_cmd_para, cmd_str)
if res[0] != 0:
return (True, res, None, None, None, None)
# 本地仓库信息检查
config = RunTools.get_global_var('config')
repo_info = FCMMGitTools.get_repo_info(os.getcwd())
fcmm_config = FCMMTools.get_fcmm_config(repo_info['work_dir'])
if repo_info['repo'] is None or fcmm_config is None:
return (True,
[2, FCMMTools.get_i18n_tips(config, 'local_git_error')
], None, None, None, None)
# 检查当前分支是否存在未提交信息
if FCMMGitTools.is_dirty(repo_info):
return (True, [
2,
FCMMTools.get_i18n_tips(config, 'current_branch_is_dirty')
], None, None, None, None)
# 下载最新的master分支
current_branch = FCMMGitTools.get_active_branch(repo_info)
try:
res = FCMMTools.run_sys_cmd_list(
['git checkout master', 'git pull origin master'])
if res[0] != 0:
return (True, [
res[0],
FCMMTools.get_i18n_tips(config, 'execute_fail')
], None, None, None, None)
fcmm_config = FCMMTools.get_fcmm_config(repo_info['work_dir'])
if fcmm_config is None:
return (True, [
2, FCMMTools.get_i18n_tips(config, 'local_git_error')
], None, None, None, None)
# 判断是否有版本分支
if fcmm_config['has_pkg'] == "true":
# 要下载版本分支，绑定与本地版本分支的关系
res = FCMMGitTools.get_remote_branch(repo_info, 'lb-pkg')
# 处理结果
if res[0] != 0:
return (True, [
res[0],
FCMMTools.get_i18n_tips(config, 'execute_fail')
], None, None, None, None)
finally:
# 最后尝试跳转回工作分支
FCMMTools.run_sys_cmd('git checkout %s' % (current_branch))
# 最后返回
return (False, [0, ''], config, fcmm_config, repo_info, current_branch)
def cmd_add_dev(dict_cmd_para=None):
"""
新增FCMM的dev分支，如果原分支存在，可以重置分支
@decorators staticmethod
@param {dict} dict_cmd_para=None - 参数字典
@returns {list} - 执行结果[returncode, msgstring]
returncode - 0代表成功，其他代表失败
msgstring - 要返回显示的内容
"""
# 进行初始化
is_exit, res, config, fcmm_config, repo_info, current_branch = FCMMGitCmd.cmd_common_init(
'add-dev', dict_cmd_para)
if is_exit:
return res
# 进一步检查
branch_name = 'tb-%s-%s' % (
FCMMTools.get_cmd_para_value(dict_cmd_para, '-t', '-type '),
FCMMTools.get_cmd_para_value(dict_cmd_para, '-n', '-name'))
res = FCMMGitTools.get_remote_branch(repo_info, branch_name)
has_branch = False
if res[0] == 0:
has_branch = True
elif not res[2]:
# 远程节点存在但处理失败
res[1] = FCMMTools.get_i18n_tips(config, 'execute_fail')
return res
if not ('-f' in dict_cmd_para.keys()
or '-force' in dict_cmd_para.keys()):
if has_branch:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_has_exists',
has_branch)
]
clone_branch_name = ''
para_clone = FCMMTools.get_cmd_para_value(dict_cmd_para, '-c',
'-clone')
ver = FCMMTools.get_cmd_para_value(dict_cmd_para, '-v', '-version')
if ver is not None and not FCMMGitTools.check_tag_exists(
repo_info, ver):
return [1, FCMMTools.get_i18n_tips(config, 'tag_not_exists', ver)]
if para_clone is None or ver is not None:
if fcmm_config['has_pkg'] == "true":
clone_branch_name = 'lb-pkg'
else:
clone_branch_name = 'master'
else:
clone_branch_name = 'tb-' + para_clone
res = FCMMGitTools.get_remote_branch(repo_info, clone_branch_name)
if res[0] != 0:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_not_exists',
clone_branch_name)
]
tag = FCMMTools.get_cmd_para_value(dict_cmd_para, '-tag', '-tag')
# 进行实际的处理
if has_branch:
# 先备份
if config['backup_before'] == 'true':
res = FCMMGitTools.backup_branch(
repo_info, branch_name,
FCMMGitTools.get_git_config_user_name(
repo_info, config['consle_encode']))
if res[0] == 0:
res = FCMMGitTools.overwrite_branch(
repo_info,
branch_name,
src_branch=clone_branch_name,
tag=ver,
commit=tag)
else:
res = FCMMGitTools.add_branch(repo_info,
branch_name,
src_branch=clone_branch_name,
tag=ver,
commit=tag)
return res
def cmd_add_cfg(dict_cmd_para=None):
"""
新增FCMM的cfg分支，如果原分支存在，可以重置分支
@decorators staticmethod
@param {dict} dict_cmd_para=None - 参数字典
@returns {list} - 执行结果[returncode, msgstring]
returncode - 0代表成功，其他代表失败
msgstring - 要返回显示的内容
"""
# 进行初始化
is_exit, res, config, fcmm_config, repo_info, current_branch = FCMMGitCmd.cmd_common_init(
'add-cfg', dict_cmd_para)
if is_exit:
return res
# 进一步检查
cfg_branch_name = 'lb-cfg-' + FCMMTools.get_cmd_para_value(
dict_cmd_para, '-n', '-name')
res = FCMMGitTools.get_remote_branch(repo_info, cfg_branch_name)
has_cfg_branch = False
if res[0] == 0:
has_cfg_branch = True
elif not res[2]:
# 远程节点存在但处理失败
res[1] = FCMMTools.get_i18n_tips(config, 'execute_fail')
return res
if not ('-f' in dict_cmd_para.keys()
or '-force' in dict_cmd_para.keys()):
if has_cfg_branch:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_has_exists',
cfg_branch_name)
]
para_clone = FCMMTools.get_cmd_para_value(dict_cmd_para, '-c',
'-clone')
para_bare = FCMMTools.get_cmd_para_value(dict_cmd_para, '-b', '-bare')
if para_bare is None and para_clone is None:
return [
1,
FCMMTools.get_i18n_tips(config, 'must_has_para',
'-bare / -b 或 -clone / -c')
]
clone_branch_name = ''
if para_bare is None:
clone_branch_name = 'lb-cfg-' + para_clone
res = FCMMGitTools.get_remote_branch(repo_info, clone_branch_name)
if res[0] != 0:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_not_exists',
clone_branch_name)
]
# 进行实际的处理
if has_cfg_branch:
# 先备份
if config['backup_before'] == 'true':
res = FCMMGitTools.backup_branch(
repo_info, cfg_branch_name,
FCMMGitTools.get_git_config_user_name(
repo_info, config['consle_encode']))
if res[0] == 0:
if clone_branch_name != '':
res = FCMMGitTools.overwrite_branch(
repo_info,
cfg_branch_name,
src_branch=clone_branch_name)
else:
res = FCMMGitTools.overwrite_branch(repo_info,
cfg_branch_name,
is_bare=True)
else:
if clone_branch_name != '':
res = FCMMGitTools.add_branch(repo_info,
cfg_branch_name,
src_branch=clone_branch_name)
else:
res = FCMMGitTools.add_branch(repo_info,
cfg_branch_name,
is_bare=True)
return res
def cmd_add_pkg(dict_cmd_para=None):
"""
新增FCMM的pkg分支，如果原分支存在，可以重置分支
@decorators staticmethod
@param {dict} dict_cmd_para=None - 参数字典
@returns {list} - 执行结果[returncode, msgstring]
returncode - 0代表成功，其他代表失败
msgstring - 要返回显示的内容
"""
# 进行初始化
is_exit, res, config, fcmm_config, repo_info, current_branch = FCMMGitCmd.cmd_common_init(
'add-pkg', dict_cmd_para)
if is_exit:
return res
# 进一步检查
ver = FCMMTools.get_cmd_para_value(dict_cmd_para, '-v', '-version')
has_pkg = FCMMGitTools.check_branch_exists(repo_info, 'lb-pkg')
if not ('-f' in dict_cmd_para.keys()
or '-force' in dict_cmd_para.keys()):
if has_pkg:
return [
1,
FCMMTools.get_i18n_tips(config, 'branch_has_exists',
'lb-pkg')
]
# 检查版本
if ver is not None and not FCMMGitTools.check_tag_exists(
repo_info, ver):
return [
1,
FCMMTools.get_i18n_tips(config, 'tag_not_exists', ver)
]
# 开始进行处理
if has_pkg:
# 分支已存在，覆盖分支
if config['backup_before'] == 'true':
res = FCMMGitTools.backup_branch(
repo_info, 'lb-pkg',
FCMMGitTools.get_git_config_user_name(
repo_info, config['consle_encode']))
if res[0] == 0:
res = FCMMGitTools.overwrite_branch(repo_info, 'lb-pkg',
'master', ver)
else:
# 分支不存在，创建分支并推送到远端
res = FCMMTools.run_sys_cmd('git checkout master')
if res[0] == 0:
fcmm_config['has_pkg'] = "true"
FCMMTools.save_to_json_file(repo_info['work_dir'], fcmm_config)
res = FCMMTools.run_sys_cmd_list([
'git add *', 'git commit -m "change .fcmm4gig by tools"',
'git push origin master'
])
if res[0] == 0:
res = FCMMGitTools.add_branch(repo_info, 'lb-pkg',
'master', ver)
# 返回值
FCMMTools.run_sys_cmd('git checkout %s' % (current_branch))
if res[0] != 0:
res[1] = FCMMTools.get_i18n_tips(config, 'execute_fail')
return res