def test_waveform_freq(self,
config_file="../configs/config_ldc.ini",
plot=True):
config = configparser.ConfigParser()
config.read(config_file)
fftwisdom.load_wisdom()
# Unpacking the hdf5 file and getting data and source parameters
p, td = loadings.load_ldc_data(config["InputData"]["FilePath"])
# Pre-processing data: anti-aliasing and filtering
tm, xd, yd, zd, q, t_offset, tobs, del_t, p_sampl = preprocess.preprocess_ldc_data(
p, td, config)
# Frequencies
freq_d = np.fft.fftfreq(len(tm), del_t * q)
# Restrict the frequency band to high SNR region
inds = np.where(
(float(config['Model']['MinimumFrequency']) <= freq_d)
& (freq_d <= float(config['Model']['MaximumFrequency'])))[0]
# Theoretical PSD
sa = tdi.noisepsd_AE(freq_d[inds], model='Proposal', includewd=None)
# Convert Michelson TDI to A, E, T (time domain)
ad, ed, td = ldctools.convert_XYZ_to_AET(xd, yd, zd)
# Transform to frequency domain
wd = np.ones(ad.shape[0])
wd_full = wd[:]
mask = wd[:]
a_df, e_df, t_df = preprocess.time_to_frequency(ad,
ed,
td,
wd,
del_t,
q,
compensate_window=True)
# Instantiate likelihood class
ll_cls = likelihoodmodel.LogLike(
[mask * ad, mask * ed],
sa,
inds,
tobs,
del_t * q,
normalized=config['Model'].getboolean('normalized'),
t_offset=t_offset,
channels=[1, 2],
scale=config["InputData"].getfloat("rescale"),
model_cls=None,
psd_cls=None,
wd=wd,
wd_full=wd_full)
t1 = time.time()
if config['Model'].getboolean('reduced'):
i_sampl_intr = [0, 1, 2, 3, 4, 7, 8]
aft, eft = ll_cls.compute_signal_reduced(p_sampl[i_sampl_intr])
else:
aft, eft = ll_cls.compute_signal(p_sampl)
t2 = time.time()
print('Waveform Calculated in ' + str(t2 - t1) + ' seconds.')
rms = rms_error(aft, a_df[inds], relative=True)
print("Cumulative relative error is " + str(rms))
self.assertLess(
rms, 1e-3,
"Cumulative relative error sould be less than 0.02 (2 percents)")
# Plotting
if plot:
from plottools import presets
presets.plotconfig(ctype='time', lbsize=16, lgsize=14)
# Frequency plot
fig1, ax1 = plt.subplots(nrows=2, sharex=True, sharey=True)
ax1[0].semilogx(freq_d[inds], np.real(a_df[inds]))
ax1[0].semilogx(freq_d[inds], np.real(aft), '--')
ax1[0].set_ylabel("Fractional frequency")
# ax1[0].legend()
ax1[1].semilogx(freq_d[inds], np.imag(a_df[inds]))
ax1[1].semilogx(freq_d[inds], np.imag(aft), '--')
ax1[1].set_xlabel("Frequency [Hz]")
ax1[1].set_ylabel("Fractional frequency")
# ax1[1].legend()
plt.show()
pyfftw.interfaces.cache.enable()
# =========================================================================
# Load configuration file
# =========================================================================
parser = OptionParser(usage="usage: %prog [options] YYY.txt",
version="10.28.2018, Quentin Baghi")
(options, args) = parser.parse_args()
if not args:
config_file = "../configs/config_template.ini"
else:
config_file = args[0]
# =========================================================================
config = configparser.ConfigParser()
config.read(config_file)
fftwisdom.load_wisdom()
# =========================================================================
# Load and pre-process input data
# =========================================================================
if 'LDC' in config["InputData"]["FilePath"]:
# Unpacking the hdf5 file and getting data and source parameters
p, tdi_data = loadings.load_ldc_data(config["InputData"]["FilePath"])
# Pre-processing data: anti-aliasing, filtering and rescaling
preproc_data = preprocess.preprocess_ldc_data(p, tdi_data, config)
tm, xd, yd, zd, q, tstart, tobs, del_t, p_sampl = preproc_data
# Convert Michelson TDI to a_mat, E, T (time domain)
ad, ed, td = ldctools.convert_XYZ_to_AET(xd, yd, zd)
def test_psd_estimation(self,
config_file="../configs/config_ldc_full.ini",
plot=True):
config = configparser.ConfigParser()
config.read(config_file)
fftwisdom.load_wisdom()
# Unpacking the hdf5 file and getting data and source parameters
p, td = loadings.load_ldc_data(config["InputData"]["FilePath"])
# Pre-processing data: anti-aliasing and filtering
tm, xd, yd, zd, q, t_offset, tobs, del_t, p_sampl = preprocess.preprocess_ldc_data(
p, td, config)
# Introducing gaps if requested
wd, wd_full, mask = loadings.load_gaps(config, tm)
print("Ideal decay number: " + str(
np.int((config["InputData"].getfloat("EndTime") - p_sampl[2]) /
(2 * del_t))))
# Now we get extract the data and transform it to frequency domain
freq_d = np.fft.fftfreq(len(tm), del_t * q)
# Convert Michelson TDI to A, E, T (time domain)
ad, ed, td = ldctools.convert_XYZ_to_AET(xd, yd, zd)
# Restrict the frequency band to high SNR region, and exclude distorted frequencies due to gaps
if (config["TimeWindowing"].getboolean('gaps')) & (
not config["Imputation"].getboolean('imputation')):
f1, f2 = physics.find_distorted_interval(mask,
p_sampl,
t_offset,
del_t,
margin=0.4)
f1 = np.max([f1, 0])
f2 = np.min([f2, 1 / (2 * del_t)])
inds = np.where(
(float(config['Model']['MinimumFrequency']) <= freq_d)
& (freq_d <= float(config['Model']['MaximumFrequency']))
& ((freq_d <= f1) | (freq_d >= f2)))[0]
else:
inds = np.where(
(float(config['Model']['MinimumFrequency']) <= freq_d)
& (freq_d <= float(config['Model']['MaximumFrequency'])))[0]
# Restriction of sampling parameters to instrinsic ones Mc, q, tc, chi1, chi2, np.sin(bet), lam
i_sampl_intr = [0, 1, 2, 3, 4, 7, 8]
print(
"================================================================="
)
fftwisdom.save_wisdom()
# Auxiliary parameter classes
print("PSD estimation enabled.")
psd_cls = psdmodel.PSDSpline(tm.shape[0],
1 / del_t,
J=config["PSD"].getint("knotNumber"),
D=config["PSD"].getint("SplineOrder"),
fmin=1 / (del_t * tm.shape[0]) * 1.05,
fmax=1 / (del_t * 2))
psd_cls.estimate(ad)
sa = psd_cls.calculate(freq_d[inds])
data_cls = None
# Instantiate likelihood class
ll_cls = likelihoodmodel.LogLike(
[mask * ad, mask * ed],
sa,
inds,
tobs,
del_t * q,
normalized=config['Model'].getboolean('normalized'),
t_offset=t_offset,
channels=[1, 2],
scale=config["InputData"].getfloat("rescale"),
model_cls=data_cls,
psd_cls=psd_cls,
wd=wd,
wd_full=wd_full)
# Test PSD estimation from the likelihood class
ll_cls.update_auxiliary_params(p_sampl[i_sampl_intr], reduced=True)
sa2 = ll_cls.psd.calculate(freq_d[inds])
# Plotting
if plot:
from plottools import presets
presets.plotconfig(ctype='time', lbsize=16, lgsize=14)
# Frequency plot
fig0, ax0 = plt.subplots(nrows=1)
ax0.semilogx(freq_d[inds],
np.sqrt(sa),
'g',
label='First estimate.')
ax0.semilogx(freq_d[inds],
np.sqrt(sa2),
'r',
label='Second estimate.')
plt.legend()
plt.show()
rms = rms_error(sa2, sa, relative=True)
print("Cumulative relative error is " + str(rms))
self.assertLess(
rms, 1e-2,
"Cumulative relative error sould be less than 0.05 (5 percents)")
def test_likelihood_with_gaps(
self,
config_file="../configs/config_ldc_single_gap.ini",
plot=True):
config = configparser.ConfigParser()
config.read(config_file)
fftwisdom.load_wisdom()
# Unpacking the hdf5 file and getting data and source parameters
p, td = loadings.load_ldc_data(config["InputData"]["FilePath"])
# Pre-processing data: anti-aliasing and filtering
tm, xd, yd, zd, q, t_offset, tobs, del_t, p_sampl = preprocess.preprocess_ldc_data(
p, td, config)
# Introducing gaps if requested
wd, wd_full, mask = loadings.load_gaps(config, tm)
print("Ideal decay number: " + str(
np.int((config["InputData"].getfloat("EndTime") - p_sampl[2]) /
(2 * del_t))))
# Now we get extract the data and transform it to frequency domain
freq_d = np.fft.fftfreq(len(tm), del_t * q)
# Convert Michelson TDI to A, E, T (time domain)
ad, ed, td = ldctools.convert_XYZ_to_AET(xd, yd, zd)
# Restrict the frequency band to high SNR region, and exclude distorted frequencies due to gaps
if (config["TimeWindowing"].getboolean('gaps')) & (
not config["Imputation"].getboolean('imputation')):
f1, f2 = physics.find_distorted_interval(mask,
p_sampl,
t_offset,
del_t,
margin=0.4)
f1 = np.max([f1, 0])
f2 = np.min([f2, 1 / (2 * del_t)])
inds = np.where(
(float(config['Model']['MinimumFrequency']) <= freq_d)
& (freq_d <= float(config['Model']['MaximumFrequency']))
& ((freq_d <= f1) | (freq_d >= f2)))[0]
else:
inds = np.where(
(float(config['Model']['MinimumFrequency']) <= freq_d)
& (freq_d <= float(config['Model']['MaximumFrequency'])))[0]
# Restriction of sampling parameters to instrinsic ones Mc, q, tc, chi1, chi2, np.sin(bet), lam
i_sampl_intr = [0, 1, 2, 3, 4, 7, 8]
print(
"================================================================="
)
fftwisdom.save_wisdom()
# Auxiliary parameter classes
psd_cls = None
# One-sided PSD
sa = tdi.noisepsd_AE(freq_d[inds], model='Proposal', includewd=None)
data_cls = None
# Instantiate likelihood class
ll_cls = likelihoodmodel.LogLike(
[mask * ad, mask * ed],
sa,
inds,
tobs,
del_t * q,
normalized=config['Model'].getboolean('normalized'),
t_offset=t_offset,
channels=[1, 2],
scale=config["InputData"].getfloat("rescale"),
model_cls=data_cls,
psd_cls=psd_cls,
wd=wd,
wd_full=wd_full)
# # Waveform generation in the Frequency domain
# t1 = time.time()
# if config['Model'].getboolean('reduced'):
# i_sampl_intr = [0, 1, 2, 3, 4, 7, 8]
# aft, eft = ll_cls.compute_signal_reduced(p_sampl[i_sampl_intr])
# else:
# aft, eft = ll_cls.compute_signal(p_sampl)
# t2 = time.time()
# print('Waveform Calculated in ' + str(t2 - t1) + ' seconds.')
# Get the windowed discrete Fourier transform used in the likelihood
a_df_like, e_df_like = ll_cls.data_dft
# Compare to the DFT of the complete data set
a_df = fft(
ad * wd_full) * del_t * q * wd_full.shape[0] / np.sum(wd_full)
e_df = fft(
ed * wd_full) * del_t * q * wd_full.shape[0] / np.sum(wd_full)
# Plotting
if plot:
from plottools import presets
presets.plotconfig(ctype='time', lbsize=16, lgsize=14)
# Time plot
fig0, ax0 = plt.subplots(nrows=1)
ax0.semilogx(tm, ad, 'k')
ax0.semilogx(tm, wd * np.max(ad), 'r')
ax0.semilogx(tm, mask * np.max(ad), 'gray')
# Frequency plot
fig1, ax1 = plt.subplots(nrows=2, sharex=True, sharey=True)
ax1[0].semilogx(freq_d[inds], np.real(a_df[inds]))
ax1[0].semilogx(freq_d[inds], np.real(a_df_like), '--')
ax1[0].set_ylabel("Fractional frequency", fontsize=16)
# ax1[0].legend()
ax1[1].semilogx(freq_d[inds], np.imag(a_df[inds]))
ax1[1].semilogx(freq_d[inds], np.imag(a_df_like), '--')
ax1[1].set_xlabel("Frequency [Hz]", fontsize=16)
ax1[1].set_ylabel("Fractional frequency", fontsize=16)
# ax1[1].legend()
for i in range(len(ax1)):
ax1[i].axvline(x=f1,
ymin=0,
ymax=np.max(np.real(a_df[inds])),
color='r',
linestyle='--')
ax1[i].axvline(x=f2,
ymin=0,
ymax=np.max(np.real(a_df[inds])),
color='r',
linestyle='--')
plt.show()
rms = rms_error(a_df_like, a_df[inds], relative=True)
print("Cumulative relative error is " + str(rms))
self.assertLess(
rms, 5e-2,
"Cumulative relative error sould be less than 0.05 (5 percents)")