def test_dmi_pbc2d():
mesh = df.BoxMesh(df.Point(0, 0, 0), df.Point(1, 1, 0.1), 2, 2, 1)
pbc = PeriodicBoundary2D(mesh)
S3 = df.VectorFunctionSpace(mesh, "Lagrange", 1, constrained_domain=pbc)
m_expr = df.Expression(("0", "0", "1"), degree=1)
m = Field(S3, m_expr, name='m')
dmi = DMI(1)
dmi.setup(m, Field(df.FunctionSpace(mesh, 'DG', 0), 1))
field = dmi.compute_field()
assert np.max(field) < 1e-15
def test_interaction_accepts_name():
"""
Check that the interaction accepts a 'name' argument
and has a 'name' attribute.
"""
dmi = DMI(1)
assert hasattr(dmi, 'name')
def test_dmi_pbc2d_1D(plot=False):
def m_init_fun(p):
if p[0] < 10:
return [0.5, 0, 1]
else:
return [-0.5, 0, -1]
mesh = df.RectangleMesh(df.Point(0, 0), df.Point(20, 2), 10, 1)
m_init = vector_valued_function(m_init_fun, mesh)
Ms = 8.6e5
sim = Simulation(mesh, Ms, pbc='2d', unit_length=1e-9)
sim.set_m(m_init_fun)
A = 1.3e-11
D = 5e-3
sim.add(Exchange(A))
sim.add(DMI(D))
sim.relax(stopping_dmdt=0.0001)
if plot:
sim.m_field.plot_with_dolfin()
mx = [sim.m_field.probe([x + 0.5, 1])[0] for x in range(20)]
assert np.max(np.abs(mx)) < 1e-6
def test_compute_skyrmion_number_2d_pbc():
mesh = df.RectangleMesh(df.Point(0, 0), df.Point(100, 100), 40, 40)
Ms = 8.6e5
sim = Simulation(mesh, Ms, pbc='2d', unit_length=1e-9)
sim.set_m(init_skx_down)
sim.add(Exchange(1.3e-11))
sim.add(DMI(D=4e-3))
sim.add(Zeeman((0, 0, 0.45 * Ms)))
sim.do_precession = False
sim.relax(stopping_dmdt=1, dt_limit=1e-9)
#df.plot(sim.m_field.f)
#df.interactive()
print np.max(sim.m_field.as_array())
sky_num = compute_skyrmion_number_2d(sim.m_field.f)
print 'sky_num = %g' % sky_num
assert sky_num < -0.95 and sky_num > -1.0
def test_DMI_energy_density_3D():
"""Same as above, on a 3D mesh."""
mesh = df.UnitCubeMesh(4, 4, 4)
V = df.VectorFunctionSpace(mesh, "CG", 1, dim=3)
M = Field(V, df.Expression(("-0.5*x[1]", "0.5*x[0]", "1"), degree=1))
Ms = 10
D = 1
dmi = DMI(D)
dmi.setup(M, Field(df.FunctionSpace(mesh, 'DG', 0), Ms))
density = dmi.energy_density()
deviation = np.abs(density - 1.0)
print "3D energy density (expect array of 1):"
print density
print "Max deviation: %g" % np.max(deviation)
assert np.all(deviation < TOL), \
"Max deviation %g, should be zero." % np.max(deviation)
def test_DMI_energy_density_2D():
"""
For a vector field (x, y, z) = 0.5 * (-y, x, c),
the curl is exactly 1.0. (HF)
"""
mesh = df.UnitSquareMesh(4, 4)
V = df.VectorFunctionSpace(mesh, "CG", 1, dim=3)
M = Field(V, value=df.Expression(("-0.5*x[1]", "0.5*x[0]", "1"), degree=1))
Ms = 1
D = 1
dmi = DMI(D)
dmi.setup(M, Field(df.FunctionSpace(mesh, 'DG', 0), Ms))
density = dmi.energy_density()
deviation = np.abs(density - 1.0)
print "2D energy density (expect array of 1):"
print density
print "Max deviation: %g" % np.max(deviation)
assert np.all(deviation < TOL), \
"Max deviation %g, should be zero." % np.max(deviation)
def excite_system():
Ms = 8.6e5
sim = Simulation(mesh, Ms, pbc='1d', unit_length=1e-9)
sim.alpha = 0.0001
sim.set_m(np.load('relaxed.npy'))
alpha_expr = AlphaExpression()
alpha_mult = df.interpolate(alpha_expr, sim.llg.S1)
sim.spatial_alpha(0.0001, alpha_mult)
#df.plot(alpha_mult)
#df.interactive()
#xs=find_skyrmion_center(sim.llg._m)
#
#assert(1==2)
A = 1.3e-11
D = 4e-3
sim.add(Exchange(A))
sim.add(DMI(D))
sim.add(Zeeman((0, 0, 0.4 * Ms)))
GHz = 1e9
omega = 50 * 2 * np.pi * GHz
def time_fun(t):
return np.sinc(omega * (t - 50e-12))
h0 = 1e3
kc = 1.0 / 45.0
H0 = MyExpression(h0, kc)
sim.add(TimeZeemanPython(H0, time_fun))
xs = find_skyrmion_center(sim.llg._m)
ts = np.linspace(0, 8e-9, 4001)
np.save('xs.npy', xs)
sim.create_integrator()
sim.integrator.integrator.set_scalar_tolerances(1e-8, 1e-8)
index = 0
for t in ts:
sim.run_until(t)
np.save('data/m_%d.npy' % index, sim.llg.m)
index += 1
def test_dmi_uses_unit_length_2dmesh():
"""
Set up a helical state in two meshes (one expressed in SI units
the other expressed in nanometers) and compute energies and fields.
"""
A = 8.78e-12 # J/m
D = 1.58e-3 # J/m^2
Ms = 3.84e5 # A/m
energies = []
# unit_lengths 1e-9 and 1 are common, let's throw in an intermediate length
# just to challenge the system a little:
for unit_length in (1, 1e-4, 1e-9):
radius = 200e-9 / unit_length
maxh = 5e-9 / unit_length
helical_period = (4 * pi * A / D) / unit_length
k = 2 * pi / helical_period
# HF 27 April 2014: The next command fails in dolfin 1.3
# mesh = df.CircleMesh(df.Point(0, 0), radius, maxh)
# The actual shape of the domain shouldn't matter for the test,
# so let's use a Rectangular mesh which should work the same:
nx = ny = int(round(radius / maxh))
mesh = df.RectangleMesh(df.Point(0, 0), df.Point(radius, radius), nx,
ny)
S3 = df.VectorFunctionSpace(mesh, "CG", 1, dim=3)
m_expr = df.Expression(("0", "cos(k * x[0])", "sin(k * x[0])"),
k=k,
degree=1)
m = Field(S3, m_expr, name='m')
dmi = DMI(D)
Ms_dg = Field(df.FunctionSpace(mesh, 'DG', 0), Ms)
dmi.setup(m, Ms_dg, unit_length=unit_length)
energies.append(dmi.compute_energy())
H = df.Function(S3)
H.vector()[:] = dmi.compute_field()
print H(0.0, 0.0)
print "Using unit_length = {}.".format(unit_length)
print "Helical period {}.".format(helical_period)
print "Energy {}.".format(dmi.compute_energy())
rel_diff_energies = abs(energies[0] - energies[1]) / abs(energies[1])
print "Relative difference of energy {}.".format(rel_diff_energies)
assert rel_diff_energies < 1e-13
rel_diff_energies2 = abs(energies[0] - energies[2]) / abs(energies[2])
print "Relative difference2 of energy {}.".format(rel_diff_energies2)
assert rel_diff_energies2 < 1e-13
def create_sim(mesh):
Ms = 3.84e5 # A/m
A = 8.78e-12 # J/m
D = 1.58e-3 # J/m**2
sim = Sim(mesh, Ms, unit_length=1e-9)
sim.set_m((0, 0, 1))
sim.set_tol(reltol=1e-10, abstol=1e-10)
sim.add(Exchange(A))
sim.add(DMI(D))
return sim
def relax_system(mesh=mesh):
Ms = 8.6e5
sim = Simulation(mesh, Ms, pbc='1d', unit_length=1e-9, name='relax')
sim.set_m(m_init_skyrmion)
A = 1.3e-11
D = 4e-3
sim.add(Exchange(A))
sim.add(DMI(D))
sim.add(Zeeman((0, 0, 0.4 * Ms)))
#sim.run_until(1e-9)
#sim.schedule('save_vtk', at_end=True)
#sim.schedule(plot_m, every=1e-10, at_end=True)
sim.relax()
df.plot(sim.llg._m)
np.save('relaxed.npy', sim.m)
def relax(mesh):
Ms = 8.6e5
sim = Simulation(mesh, Ms, pbc='2d',unit_length=1e-9)
sim.set_m(m_init_fun)
sim.add(Exchange(1.3e-11))
sim.add(DMI(D = 4e-3))
sim.add(Zeeman((0,0,0.45*Ms)))
sim.alpha = 0.5
ts = np.linspace(0, 1e-9, 101)
for t in ts:
sim.run_until(t)
p = df.plot(sim.llg._m)
sim.save_vtk()
df.plot(sim.llg._m).write_png("vortex")
df.interactive()
def move_skyrmion(mesh):
Ms = 8.6e5
sim = Simulation(mesh, Ms, pbc='2d',unit_length=1e-9, kernel='llg_stt')
sim.set_m(np.load('m0.npy'))
sim.add(Exchange(1.3e-11))
sim.add(DMI(D = 4e-3))
sim.add(Zeeman((0,0,0.45*Ms)))
sim.alpha=0.01
sim.llg.set_parameters(J_profile=init_J, speedup=50)
ts = np.linspace(0, 5e-9, 101)
for t in ts:
sim.run_until(t)
print t
#p = df.plot(sim.llg._m)
sim.save_vtk(filename='nonlocal/v1e7_.pvd')
df.plot(sim.llg._m).write_png("vortex")
def move_skyrmion(mesh):
Ms = 8.6e5
sim = Simulation(mesh, Ms, pbc='2d', unit_length=1e-9)
sim.set_m(np.load('m0.npy'))
sim.add(Exchange(1.3e-11))
sim.add(DMI(D=4e-3))
sim.add(Zeeman((0, 0, 0.45 * Ms)))
sim.alpha = 0.01
sim.set_zhangli(init_J, 1.0, 0.01)
ts = np.linspace(0, 10e-9, 101)
for t in ts:
sim.run_until(t)
print t
#p = df.plot(sim.llg._m)
sim.save_vtk(filename='vtks/v1e7_.pvd')
df.plot(sim.llg._m).write_png("vortex")
def compute_skyrmion_number_2d_example():
mesh = df.CircleMesh(df.Point(0, 0), 20, 4)
Ms = 3.84e5
mu0 = 4 * np.pi * 1e-7
Hz = 0.2
sim = Simulation(mesh, Ms, unit_length=1e-9, name='sim')
sim.do_precession = False
sim.set_m(init_skx_down)
sim.add(Exchange(8.78e-12))
sim.add(DMI(-1.58e-3))
sim.add(Zeeman((0, 0, Hz / mu0)))
sim.relax(stopping_dmdt=1, dt_limit=1e-9)
#sim.m_field.plot_with_dolfin(interactive=True)
print compute_skyrmion_number_2d(sim.m_field.f)
def run_finmag():
sim = Sim(mesh, Ms, unit_length=unit_length)
sim.alpha = 0.5
sim.set_m(init_m)
exchange = Exchange(13.0e-12)
sim.add(exchange)
dmi = DMI(4e-3)
sim.add(dmi)
dmi_direct = DMI(4e-3, method='direct', name='dmi_direct')
sim.add(dmi_direct)
df.plot(sim.m_field.f, title='m')
fun = df.interpolate(HelperExpression(), sim.S3)
df.plot(fun, title='exact')
df.plot(Field(sim.S3, dmi.compute_field()).f, title='dmi_petsc')
df.plot(Field(sim.S3, dmi_direct.compute_field()).f,
title='dmi_direct',
interactive=True)
#Gilbert damping for the spin waves recording
sw_alpha = 1e-20
mesh = df.BoxMesh(0, 0, 0, xdim, ydim, zdim, xv, yv, zv)
sim = Sim(mesh, Ms)
sim.set_m((1,1,1))
#exchange energy constant
A = 3.57e-13 #J/m
#DMI constant
D = 2.78e-3 #J/m**2
#external magnetic field
H = [0,0,0] #A/m
sim.add(Exchange(A)) #exchnage interaction
sim.add(DMI(D)) #DMI interaction
sim.add(Zeeman(H)) #Zeeman interaction
############################################################
#time series for the static state simulation
tsim = np.linspace(tstart, tstatic, 101)
#simulation to the ground state
sim.alpha = 1 #dynamics neglected
for t in tsim:
sim.run_until(t)
df.plot(sim.llg._m)
############################################################
############################################################
#excite the system with an external sinc field
tsim = np.linspace(tstatic+toffset, tstatic+tpulse, n_sinc_steps)
import numpy as np
import dolfin as df
from finmag import Simulation
from finmag.energies import Exchange, DMI_Old, DMI
mesh = df.Box(0, 0, 0, 30e-9, 30e-9, 3e-9, 10, 10, 1)
Ms = 8.6e5
sim = Simulation(mesh, Ms)
sim.set_m((Ms, 0, 0))
A = 1.3e-11
D = 4e-3
sim.add(Exchange(A))
sim.add(DMI(D))
series = df.TimeSeries("solution/m")
t = np.linspace(0, 1e-9, 1000)
for i in t:
sim.run_until(i)
p = df.plot(sim.llg._m)
p.write_png("m_{}".format(i))
series.store(sim.llg._m.vector(), i)
df.interactive()
def test_dmi_field():
"""
Simulation 1 is computing H_dmi=dE_dM via assemble.
Simulation 2 is computing H_dmi=g*M with a suitable pre-computed matrix g.
Simulation 3 is computing g using a petsc matrix.
We show that the three methods give equivalent results (this relies
on H_dmi being linear in M).
"""
m_initial = df.Expression(
('(2*x[0]-L)/L', 'sqrt(1 - ((2*x[0]-L)/L)*((2*x[0]-L)/L))', '0'),
L=length,
degree=1)
m = Field(V)
m.set(m_initial)
dmi1 = DMI(D=5e-3, method="box-assemble")
dmi1.setup(m, Field(df.FunctionSpace(mesh, 'DG', 0), 8.6e5))
dmi2 = DMI(D=5e-3, method="box-matrix-numpy")
dmi2.setup(m, Field(df.FunctionSpace(mesh, 'DG', 0), 8.6e5))
dmi3 = DMI(D=5e-3, method="box-matrix-petsc")
dmi3.setup(m, Field(df.FunctionSpace(mesh, 'DG', 0), 8.6e5))
H_dmi1 = dmi1.compute_field()
H_dmi2 = dmi2.compute_field()
H_dmi3 = dmi3.compute_field()
diff12 = np.max(np.abs(H_dmi1 - H_dmi2))
diff13 = np.max(np.abs(H_dmi1 - H_dmi3))
print "Difference between H_dmi1 and H_dmi2: max(abs(H_dmi1-H_dmi2))=%g" % diff12
print "Max value = %g, relative error = %g " % (max(H_dmi1),
diff12 / max(H_dmi1))
print "Difference between H_dmi1 and H_dmi3: max(abs(H_dmi1-H_dmi3))=%g" % diff13
print "Max value = %g, relative error = %g " % (max(H_dmi1),
diff13 / max(H_dmi1))
assert diff12 < 5e-8
assert diff13 < 5e-8
assert diff12 / max(H_dmi1) < 1e-14
assert diff13 / max(H_dmi1) < 1e-14
# df.plot(mesh, interactive=True)
print finmag.util.meshes.mesh_quality(mesh)
print finmag.util.meshes.mesh_info(mesh)
# Generate simulation object with or without PBCs
if not args.PBC_2D:
sim = Sim(mesh, args.Ms, unit_length=1e-9, name=args.sim_name)
else:
sim = Sim(mesh, args.Ms, unit_length=1e-9, pbc='2d', name=args.sim_name)
# Add energies
sim.add(Exchange(args.A))
if args.D != 0:
sim.add(DMI(args.D * 1e-3, dmi_type='interfacial'))
# Zeeman field in the z direction (in Tesla)
# if it is not zero
if args.B != 0:
sim.add(Zeeman((0, 0, args.B / finmag.util.consts.mu0)))
if args.k_u:
sim.add(UniaxialAnisotropy(args.k_u, (0, 0, 1), name='Ku'))
# No Demag in 2D
# sim.add(Demag())
# sim.llg.presession = False
if args.alpha:
from finmag.util.dmi_helper import find_skyrmion_center_2d
from finmag.util.helpers import set_logging_level
from finmag.util import meshes
import finmag
rdir = '../results/relax'
os.chdir(rdir)
h5_file = df.HDF5File(df.mpi_comm_world(), 'relaxed-nanotrack-1e-7.h5', 'r')
mesh = df.Mesh()
h5_file.read(mesh, 'mesh', False)
sim = Sim(mesh=mesh, Ms=5.8e5, unit_length=1e-9, pbc=None)
sim.add(UniaxialAnisotropy(K1=6e5, axis=[0, 0, 1]))
sim.add(Exchange(A=1.5e-11))
sim.add(DMI(D=3e-3))
sim.add(Zeeman((0, 0, 1e5)))
sim.alpha = 0.5
print('Trying to load relaxed state')
m = hlp.load_h5_field(sim, 'relaxed-nanotrack-1e-7.h5')
sim.set_m(m)
sim.do_precession = False
print('Computing eigenmodes!\n\n\n')
n_eigenmodes = 50 # Calculate the first 50 eigenmodes.
complex_freqs = sim.compute_normal_modes(n_values=n_eigenmodes)
f_array = np.real(complex_freqs[0])
np.save('frequencies.npy', f_array)
# Bulk
A = 13e-12
D = 3e-3
Ms = 0.86e6
Ku = 0.4e6
initial_sk_diam = 10
sim = Sim(mesh, Ms=Ms, unit_length=1e-9, name="1d_Cnv")
sim.set_m((0, 0.1, 0.9))
# -----------------------------------------------------------------------------
# Exchange Energy
sim.add(Exchange(A))
# DMI
sim.add(DMI(D, dmi_type='interfacial'))
# Uniaxial Anisotropy
sim.add(UniaxialAnisotropy(Ku, (0, 0, 1), name='Ku'))
# -----------------------------------------------------------------------------
sim.do_precession = False
sim.alpha = 0.9
if not os.path.exists('vtks'):
# shutil.rmtree('vtks')
os.mkdir('vtks')
sim.relax()
sim.save_vtk(filename='vtks/1d_Cnv.pvd', overwrite=True)
sim.save_field('m', '1d_Cnv.npy', overwrite=True)
def m_init_fun(pos):
return np.random.random(3)-0.5
pbc=True
Ms = 8.6e5
sim = (mesh, Ms,unit_length=1e-9,pbc2d=pbc)
sim.set_m(m_init_fun)
sim.T=temperature
#A = 3.57e-13
#D = 2.78e-3
A = 1.3e-11
D = 4e-3
sim.add(Exchange(A,pbc2d=pbc))
sim.add(DMI(D,pbc2d=pbc))
sim.add(Zeeman((0,0,0.35*Ms)))
#sim.add(Demag())
def loop(final_time, steps=200):
t = np.linspace(sim.t + 1e-12, final_time, steps)
for i in t:
sim.run_until(i)
p = df.plot(sim._m)
df.interactive()
loop(5e-10)
phi = np.arctan2(y, x) + 0.5 * np.pi
k = np.pi / initial_sk_diam
return (np.sin(k * r) * np.cos(phi), np.sin(k * r) * np.sin(phi),
-np.cos(k * r))
else:
return (0, 0, 1)
sim.set_m(m_init)
# -----------------------------------------------------------------------------
# Exchange Energy
sim.add(Exchange(A))
# DMI
sim.add(DMI(D, dmi_type='bulk'))
# Add the corresponding Zeeman field
sim.add(Zeeman((0, 0, B / mu0)))
# -----------------------------------------------------------------------------
sim.do_precession = False
sim.alpha = 0.9
if os.path.exists('vtks'):
shutil.rmtree('vtks')
os.mkdir('vtks')
sim.save_vtk(filename='vtks/m.pvd'.format(0))
sim.relax()
sim.save_vtk(filename='vtks/m.pvd'.format(1))
Ms = 3.84e5 # magnetisation saturation (A/m)
A = 8.78e-12 # exchange energy constant (J/m)
D = 1.58e-3 # DMI constant (J/m**2)
# initial magnetisation configuration
m_init = (0, 0, 1)
# We vary the thickness of the top layer.
for ht in np.arange(2, 19, 1):
# Create mesh and simulation.
mesh = hlp.disk_with_internal_boundary(d, hb, ht, lmax)
sim = Sim(mesh, Ms, unit_length=1e-9)
# Add energies. No Zeeman because the system is in zero field.
sim.add(Exchange(A))
sim.add(DMI(hlp.D_init(D)))
sim.add(Demag())
# Turn off precession to speed up simulations.
sim.do_precession = False
# Initialise the system.
sim.set_m(m_init)
# Relax the system with reduced stopping dmdt value for higher
# precision.
sim.relax(stopping_dmdt=0.1)
# Define and create results directory.
basename = 'd{}hb{}ht{}'.format(d, hb, ht)
rdir = '../results/stability/{}'.format(basename)