def test045_lake1ss_table(): # init paths test_ex_name = 'test045_lake1ss_table' model_name = 'lakeex1b' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'lakeex1b_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'lakeex1b_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'lakeex1b.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # change some settings model = sim.get_model(model_name) laktbl = model.get_package('tab').table laktbl_data = laktbl.get_data() laktbl_data[-1][0] = 700.0 laktbl.set_data(laktbl_data) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'lakeex1b.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # clean up sim.delete_output_files() return
def test001e_uzf_3lay(): # init paths test_ex_name = 'test001e_UZF_3lay' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'test001e_UZF_3lay_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'test001e_UZF_3lay_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'test001e_UZF_3lay.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # change some settings model = sim.get_model(model_name) uzf = model.get_package('uzf') uzf_data = uzf.packagedata uzf_array = uzf_data.get_data() # increase initial water content for index in range(0, len(uzf_array)): uzf_array[index][7] = 0.3 uzf_data.set_data(uzf_array) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'test001e_UZF_3lay.hds') outfile = os.path.join(save_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile)
def test001e_uzf_3lay(): # init paths test_ex_name = 'test001e_UZF_3lay' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'test001e_UZF_3lay_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'test001e_UZF_3lay_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'test001e_UZF_3lay.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # change some settings model = sim.get_model(model_name) uzf = model.get_package('uzf') uzf_data = uzf.packagedata uzf_array = uzf_data.get_data() # increase initial water content for index in range(0, len(uzf_array)): uzf_array[index][7] = 0.3 uzf_data.set_data(uzf_array) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'test001e_UZF_3lay.hds') outfile = os.path.join(save_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile)
def test005_advgw_tidal(): # init paths test_ex_name = 'test005_advgw_tidal' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'AdvGW_tidal_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'AdvGW_tidal_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verbosity_level=2) # test obs/ts package interface model = sim.get_model(model_name) ghb = model.get_package('ghb') obs = ghb.obs digits = obs.digits.get_data() assert (digits == 10) names = ghb.ts.time_series_namerecord.get_data() assert (names[0][0] == 'tides') # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'advgw_tidal.hds') outfile = os.path.join(run_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) # change some settings """
def test027_timeseriestest(): # init paths test_ex_name = 'test027_TimeseriesTest' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'timeseriestest_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'timeseriestest_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'timeseriestest.hds') outfile = os.path.join(run_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) model = sim.get_model(model_name) rch = model.get_package('rcha') tas_rch = rch.get_package('tas') tas_array_data = tas_rch.tas_array.get_data(12.0) assert tas_array_data == 0.0003 tas_array_data = 0.02 tas_rch.tas_array.set_data(tas_array_data, key=12.0) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'timeseriestest.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new)
def test027_timeseriestest(): # init paths test_ex_name = 'test027_TimeseriesTest' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'timeseriestest_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'timeseriestest_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'timeseriestest.hds') outfile = os.path.join(run_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) model = sim.get_model(model_name) rch = model.get_package('rcha') tas_rch = rch.get_package('tas') tas_array_data = tas_rch.tas_array.get_data(12.0) assert tas_array_data == 0.0003 tas_array_data = 0.02 tas_rch.tas_array.set_data(tas_array_data, key=12.0) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'timeseriestest.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new)
def test045_lake2tr(): # init paths test_ex_name = 'test045_lake2tr' model_name = 'lakeex2a' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'lakeex2a_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'lakeex2a_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # write simulation to new location sim.simulation_data.mfpath.set_sim_path(run_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'lakeex2a.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # change some settings model = sim.get_model(model_name) evt = model.get_package('evt') evt.rate.set_data([0.05], key=0) lak = model.get_package('lak') lak_period = lak.lakeperioddata lak_period_data = lak_period.get_data() lak_period_data[0][2][2] = '0.05' lak_period.set_data(lak_period_data[0], 0) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'lakeex2a.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new)
def test045_lake2tr(): # init paths test_ex_name = 'test045_lake2tr' model_name = 'lakeex2a' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'lakeex2a_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'lakeex2a_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # write simulation to new location sim.simulation_data.mfpath.set_sim_path(run_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'lakeex2a.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # change some settings model = sim.get_model(model_name) evt = model.get_package('evt') evt.rate.set_data([0.05], key=0) lak = model.get_package('lak') lak_period = lak.lakeperioddata lak_period_data = lak_period.get_data() lak_period_data[0][2][2] = '0.05' lak_period.set_data(lak_period_data[0], 0) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'lakeex2a.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new)
def test005_advgw_tidal(): # init paths test_ex_name = 'test005_advgw_tidal' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'AdvGW_tidal_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'AdvGW_tidal_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verbosity_level=2) # test obs/ts package interface model = sim.get_model(model_name) ghb = model.get_package('ghb') obs = ghb.obs digits = obs.digits.get_data() assert(digits == 10) names = ghb.ts.time_series_namerecord.get_data() assert(names[0][0] == 'tides') # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'advgw_tidal.hds') outfile = os.path.join(run_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) # change some settings """
def test005_advgw_tidal(): # init paths test_ex_name = 'test005_advgw_tidal' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'AdvGW_tidal_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'AdvGW_tidal_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verbosity_level=VerbosityLevel.verbose) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'advgw_tidal.hds') outfile = os.path.join(run_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) # change some settings """
def test001a_tharmonic(): # init paths test_ex_name = 'test001a_Tharmonic' model_name = 'flow15' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'flow15_flow_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'flow15_flow_adj.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'flow15_flow_unch.cbc') expected_cbc_file_b = os.path.join(expected_output_folder, 'flow15_flow_adj.cbc') array_util = PyListUtil() # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verbosity_level=0) sim.simulation_data.mfpath.set_sim_path(run_folder) model = sim.get_model(model_name) model.export('{}/tharmonic.nc'.format(model.model_ws)) model.export('{}/tharmonic.shp'.format(model.model_ws)) model.dis.botm.export('{}/botm.shp'.format(model.model_ws)) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_obj.list_records() budget_frf_valid = np.array(budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'flow15_flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')] assert array_util.array_comp(budget_frf_valid, budget_frf) # change some settings hk_data = sim.simulation_data.mfdata[(model_name, 'npf', 'griddata', 'k')] hk_array = hk_data.get_data() hk_array[0,0,1] = 20.0 hk_data.set_data(hk_array) model = sim.get_model(model_name) ic = model.get_package('ic') ic_data = ic.strt ic_array = ic_data.get_data() ic_array[0,0,0] = 1.0 ic_array[0,0,9] = 1.0 ic_data.set_data(ic_array) get_test = hk_data[0,0,0] assert(get_test == 10.0) get_test = hk_data.array assert(array_util.array_comp(get_test, [[10.0, 20.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0]])) get_test = hk_data[:] assert(array_util.array_comp(get_test, [[[10.0, 20.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0]]])) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_frf_valid = np.array(budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'flow15_flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')] assert array_util.array_comp(budget_frf_valid, budget_frf) # clean up sim.delete_output_files() return
def test001e_uzf_3lay(): # init paths test_ex_name = 'test001e_UZF_3lay' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'test001e_UZF_3lay_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'test001e_UZF_3lay_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verify_data=True) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'test001e_UZF_3lay.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # change some settings model = sim.get_model(model_name) uzf = model.get_package('uzf') uzf_data = uzf.packagedata uzf_array = uzf_data.get_data() # increase initial water content for index in range(0, len(uzf_array)): uzf_array[index][7] = 0.3 uzf_data.set_data(uzf_array) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'test001e_UZF_3lay.hds') outfile = os.path.join(save_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) # test load_only model_package_check = ['chd', 'ic', 'npf', 'oc', 'sto', 'uzf'] load_only_lists = [['chd6', 'ic6', 'ims', 'npf6', 'obs', 'oc', 'sto'], ['chd6', 'ims', 'npf6', 'obs', 'oc', 'sto', 'uzf6'], ['chd', 'ic', 'npf', 'obs', 'sto'], ['ic6', 'ims', 'obs6', 'oc6']] for load_only in load_only_lists: sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, load_only=load_only) model = sim.get_model() for package in model_package_check: assert (package in model.package_type_dict) == \ (package in load_only or '{}6'.format(package) in load_only) if run: # test running a runnable load_only case sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, load_only=load_only_lists[0]) assert sim.run_simulation()[0]
def test001a_tharmonic(): # init paths test_ex_name = 'test001a_Tharmonic' model_name = 'flow15' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'flow15_flow_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'flow15_flow_adj.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'flow15_flow_unch.cbc') expected_cbc_file_b = os.path.join(expected_output_folder, 'flow15_flow_adj.cbc') array_util = PyListUtil() # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verbosity_level=0, verify_data=True, write_headers=False) sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.set_all_data_external() sim.write_simulation(silent=True) model = sim.get_model(model_name) model.export('{}/tharmonic.nc'.format(model.model_ws)) model.export('{}/tharmonic.shp'.format(model.model_ws)) model.dis.botm.export('{}/botm.shp'.format(model.model_ws)) mg = model.modelgrid if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='auto') budget_obj.list_records() budget_frf_valid = np.array( budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'flow15_flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')] assert array_util.array_comp(budget_frf_valid, budget_frf) # change some settings hk_data = sim.simulation_data.mfdata[(model_name, 'npf', 'griddata', 'k')] hk_array = hk_data.get_data() hk_array[0, 0, 1] = 20.0 hk_data.set_data(hk_array) model = sim.get_model(model_name) ic = model.get_package('ic') ic_data = ic.strt ic_array = ic_data.get_data() ic_array[0, 0, 0] = 1.0 ic_array[0, 0, 9] = 1.0 ic_data.set_data(ic_array) get_test = hk_data[0, 0, 0] assert (get_test == 10.0) get_test = hk_data.array assert (array_util.array_comp( get_test, [[10.0, 20.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0]])) get_test = hk_data[:] assert (array_util.array_comp( get_test, [[[10.0, 20.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0]]])) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision='auto') budget_frf_valid = np.array( budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'flow15_flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')] assert array_util.array_comp(budget_frf_valid, budget_frf) # clean up sim.delete_output_files() return
def test005_advgw_tidal(): # init paths test_ex_name = 'test005_advgw_tidal' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'AdvGW_tidal_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'AdvGW_tidal_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verbosity_level=2, verify_data=True) # test obs/ts package interface model = sim.get_model(model_name) time = model.modeltime assert (time.steady_state[0] == True and time.steady_state[1] == False and time.steady_state[2] == False and time.steady_state[3] == False) ghb = model.get_package('ghb') obs = ghb.obs digits = obs.digits.get_data() assert (digits == 10) names = ghb.ts.time_series_namerecord.get_data() assert (names[0][0] == 'tides') # add a stress period beyond nper spd = ghb.stress_period_data.get_data() spd[20] = copy.deepcopy(spd[0]) ghb.stress_period_data.set_data(spd) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.set_all_data_external() sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'advgw_tidal.hds') outfile = os.path.join(run_folder, 'head_compare.dat') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile)
def test_specific_discharge_mf6(): from flopy.mf6.modflow.mfsimulation import MFSimulation import matplotlib.pyplot as plt from matplotlib.quiver import Quiver # build and run MODFLOW 6 model build_model_mf6() # load and postprocess sim = MFSimulation.load(sim_name=modelname_mf6, sim_ws=modelws_mf6, verbosity_level=0) gwf = sim.get_model(modelname_mf6) qx, qy, qz = flopy.utils.postprocessing.get_specific_discharge(gwf, cbcfile_mf6, precision='double', hdsfile=hdsfile_mf6) # check nan values assert np.isnan(qx[0, 0, 2]) assert np.isnan(qx[1, 0, 1]) # overall check overall = np.nansum(qx) + np.nansum(qy) + np.nansum(qz) assert np.allclose(overall, -2.5768726154495947) # plot discharge in map view lay = 1 modelmap = flopy.plot.PlotMapView(model=gwf, layer=lay) quiver = modelmap.plot_vector(qx, qy, normalize=True) # check plot ax = modelmap.ax if len(ax.collections) == 0: raise AssertionError("Discharge vector was not drawn") for col in ax.collections: if not isinstance(col, Quiver): raise AssertionError("Unexpected collection type") assert np.sum(quiver.Umask) == 1 pos = np.sum(quiver.X) + np.sum(quiver.Y) assert np.allclose(pos, 1600.) val = np.sum(quiver.U) + np.sum(quiver.V) assert np.allclose(val, 11.10085455942011) # close figure plt.close() # plot discharge in cross-section view hds = bf.HeadFile(hdsfile_mf6, precision='double') head = hds.get_data() row = 0 xsect = flopy.plot.PlotCrossSection(model=gwf, line={'row': row}) quiver = xsect.plot_vector(qx, qy, qz, head=head, normalize=True) # check plot ax = xsect.ax if len(ax.collections) == 0: raise AssertionError("Discharge vector was not drawn") for col in ax.collections: if not isinstance(col, Quiver): raise AssertionError("Unexpected collection type") assert np.sum(quiver.Umask) == 3 X = np.ma.masked_where(quiver.Umask, quiver.X) Y = np.ma.masked_where(quiver.Umask, quiver.Y) pos = X.sum() + Y.sum() assert np.allclose(pos, -145.94665962387785) U = np.ma.masked_where(quiver.Umask, quiver.U) V = np.ma.masked_where(quiver.Umask, quiver.V) val = U.sum() + V.sum() assert np.allclose(val, -4.49596527119806) # close figure plt.close() return
def test006_gwf3(): # init paths test_ex_name = 'test006_gwf3' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'flow_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'flow_adj.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'flow_unch.cbc') expected_cbc_file_b = os.path.join(expected_output_folder, 'flow_adj.cbc') array_util = PyListUtil() # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_fjf_valid = np.array(budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) jaentries = budget_fjf_valid.shape[-1] budget_fjf_valid.shape = (-1, jaentries) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_fjf = np.array(sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')]) assert array_util.array_comp(np.array(budget_fjf_valid), np.array(budget_fjf)) # change some settings model = sim.get_model(model_name) hk = model.get_package('npf').k hk_data = hk.get_data() hk_data[2] = 3.5 hk.set_data(hk_data) ex_happened = False try: hk.make_layered() except: ex_happened = True assert(ex_happened) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_fjf_valid = np.array(budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) jaentries = budget_fjf_valid.shape[-1] budget_fjf_valid.shape = (-1, jaentries) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_fjf = np.array(sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')]) assert array_util.array_comp(np.array(budget_fjf_valid), np.array(budget_fjf)) # confirm that files did move save_folder = os.path.join(run_folder, 'temp_two') sim.simulation_data.mfpath.set_sim_path(save_folder) # write with "copy_external_files" turned off so external files do not get copied to new location sim.write_simulation(ext_file_action=flopy.mf6.mfbase.ExtFileAction.copy_none) if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_fjf_valid = np.array(budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) jaentries = budget_fjf_valid.shape[-1] budget_fjf_valid.shape = (-1, jaentries) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_fjf = np.array(sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')]) assert array_util.array_comp(np.array(budget_fjf_valid), np.array(budget_fjf)) # confirm that files did not move assert not os.path.isfile(os.path.join(save_folder, 'flow.disu.ja.dat')) assert not os.path.isfile(os.path.join(save_folder, 'flow.disu.iac.dat')) assert not os.path.isfile(os.path.join(save_folder, 'flow.disu.cl12.dat')) assert not os.path.isfile(os.path.join(save_folder, 'flow.disu.area.dat')) assert not os.path.isfile(os.path.join(save_folder, 'flow.disu.hwva.dat')) # clean up sim.delete_output_files() return
def test036_twrihfb(): # init paths test_ex_name = 'test036_twrihfb' model_name = 'twrihfb2015' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'twrihfb2015_output_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'twrihfb2015_output_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'twrihfb2015_output.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # change some settings hydchr = sim.simulation_data.mfdata[(model_name, 'hfb', 'period', 'stress_period_data')] hydchr_data = hydchr.get_data() hydchr_data[0][2][2] = 0.000002 hydchr_data[0][3][2] = 0.000003 hydchr_data[0][4][2] = 0.0000004 hydchr.set_data(hydchr_data[0], 0) cond = sim.simulation_data.mfdata[(model_name, 'drn', 'period', 'stress_period_data')] cond_data = cond.get_data() for index in range(0, len(cond_data[0])): cond_data[0][index][2] = 2.1 cond.set_data(cond_data[0], 0) rch = sim.simulation_data.mfdata[(model_name, 'rcha', 'period', 'recharge')] rch_data = rch.get_data() assert(rch_data[0][5][1] == 0.00000003) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'twrihfb2015_output.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new)
def test045_lake1ss_table(): # init paths test_ex_name = 'test045_lake1ss_table' model_name = 'lakeex1b' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'lakeex1b_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'lakeex1b_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'lakeex1b.hds') outfile = os.path.join(run_folder, 'headcompare_a.txt') success = pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) assert success # change some settings model = sim.get_model(model_name) laktbl = model.get_package('tab').table laktbl_data = laktbl.get_data() laktbl_data[-1][0] = 700.0 laktbl.set_data(laktbl_data) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'lakeex1b.hds') outfile = os.path.join(run_folder, 'headcompare_b.txt') success = pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) assert success # clean up sim.delete_output_files() return
def test006_2models_mvr(): # init paths test_ex_name = 'test006_2models_mvr' sim_name = 'test006_2models_mvr' model_names = ['parent', 'child'] pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'model1_unch.hds') expected_head_file_aa = os.path.join(expected_output_folder, 'model2_unch.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'model1_unch.cbc') expected_head_file_b = os.path.join(expected_output_folder, 'model1_adj.hds') expected_head_file_bb = os.path.join(expected_output_folder, 'model2_adj.hds') # load simulation sim = MFSimulation.load(sim_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'model1.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) head_file = os.path.join(os.getcwd(), expected_head_file_aa) head_new = os.path.join(run_folder, 'model2.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_obj.list_records() # test getting models model_dict = sim.model_dict assert len(model_dict) == 2 for model in model_dict.values(): assert model.name in model_names names = sim.model_names assert len(names) == 2 for name in names: assert name in model_names model = sim.get_model(name) assert model.model_type == 'gwf' models = sim.gwf assert len(models) == 2 for model in models: assert model.name in model_names assert model.model_type == 'gwf' # change some settings parent_model = sim.get_model(model_names[0]) maw_pkg = parent_model.get_package('maw') period_data = maw_pkg.perioddata.get_data() period_data[0][0][2] = -1.0 maw_pkg.perioddata.set_data(period_data[0], 0) well_rec_data = maw_pkg.packagedata.get_data() assert(well_rec_data[0][0] == 0) exg_pkg = sim.get_exchange_file('simulation.exg') exg_data = exg_pkg.exchangedata.get_data() for index in range(0, len(exg_data)): exg_data[index][6] = 500.0 exg_pkg.exchangedata.set_data(exg_data) # test getting packages pkg_dict = parent_model.package_dict assert len(pkg_dict) == 6 pkg_names = parent_model.package_names assert len(pkg_names) == 6 # confirm that this is a copy of the original dictionary with references # to the packages del pkg_dict[pkg_names[0]] assert len(pkg_dict) == 5 pkg_dict = parent_model.package_dict assert len(pkg_dict) == 6 old_val = pkg_dict['dis'].nlay.get_data() pkg_dict['dis'].nlay = 22 pkg_dict = parent_model.package_dict assert pkg_dict['dis'].nlay.get_data() == 22 pkg_dict['dis'].nlay = old_val # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'model1.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) head_file = os.path.join(os.getcwd(), expected_head_file_bb) head_new = os.path.join(save_folder, 'model2.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # clean up sim.delete_output_files() return
def test027_timeseriestest(): # init paths test_ex_name = "test027_TimeseriesTest" model_name = "gwf_1" pth = os.path.join("..", "examples", "data", "mf6", test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, "temp") if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, "expected_output") expected_head_file_a = os.path.join(expected_output_folder, "timeseriestest_unch.hds") expected_head_file_b = os.path.join(expected_output_folder, "timeseriestest_adj.hds") # load simulation sim = MFSimulation.load(model_name, "mf6", exe_name, pth, verify_data=True) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.set_all_data_external() sim.write_simulation() # reload sim sim = MFSimulation.load(model_name, "mf6", exe_name, run_folder, verify_data=True) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, "timeseriestest.hds") outfile = os.path.join(run_folder, "head_compare.dat") assert pymake.compare_heads( None, None, files1=head_file, files2=head_new, outfile=outfile, htol=10.0, ) model = sim.get_model(model_name) rch = model.get_package("rcha") tas_rch = rch.get_package("tas") tas_array_data = tas_rch.tas_array.get_data(12.0) assert tas_array_data == 0.0003 tas_array_data = 0.02 tas_rch.tas_array.set_data(tas_array_data, key=12.0) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, "timeseriestest.hds") assert pymake.compare_heads( None, None, files1=head_file, files2=head_new, htol=10.0, )
def test001a_tharmonic(): # init paths test_ex_name = "test001a_Tharmonic" model_name = "flow15" pth = os.path.join("..", "examples", "data", "mf6", test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, "temp") if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, "expected_output") expected_head_file_a = os.path.join(expected_output_folder, "flow15_flow_unch.hds") expected_head_file_b = os.path.join(expected_output_folder, "flow15_flow_adj.hds") expected_cbc_file_a = os.path.join(expected_output_folder, "flow15_flow_unch.cbc") expected_cbc_file_b = os.path.join(expected_output_folder, "flow15_flow_adj.cbc") array_util = PyListUtil() # load simulation sim = MFSimulation.load( model_name, "mf6", exe_name, pth, verbosity_level=0, verify_data=True, write_headers=False, ) sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.set_all_data_external(external_data_folder="data") sim.write_simulation(silent=True) # verify external data written to correct location data_path = os.path.join(run_folder, "data", "flow15.dis_botm.txt") assert os.path.exists(data_path) # model export test model = sim.get_model(model_name) model.export("{}/tharmonic.nc".format(model.model_ws)) model.export("{}/tharmonic.shp".format(model.model_ws)) model.dis.botm.export("{}/botm.shp".format(model.model_ws)) mg = model.modelgrid if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision="auto") budget_obj.list_records() budget_frf_valid = np.array( budget_obj.get_data(text=" FLOW JA FACE", full3D=True)) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, "flow15_flow.hds") assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, "CBC", "FLOW-JA-FACE")] assert array_util.array_comp(budget_frf_valid, budget_frf) # change some settings hk_data = sim.simulation_data.mfdata[(model_name, "npf", "griddata", "k")] hk_array = hk_data.get_data() hk_array[0, 0, 1] = 20.0 hk_data.set_data(hk_array) model = sim.get_model(model_name) ic = model.get_package("ic") ic_data = ic.strt ic_array = ic_data.get_data() ic_array[0, 0, 0] = 1.0 ic_array[0, 0, 9] = 1.0 ic_data.set_data(ic_array) get_test = hk_data[0, 0, 0] assert get_test == 10.0 get_test = hk_data.array assert array_util.array_comp( get_test, [[10.0, 20.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0]], ) get_test = hk_data[:] assert array_util.array_comp( get_test, [[[10.0, 20.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0, 10.0]]], ) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision="auto") budget_frf_valid = np.array( budget_obj.get_data(text=" FLOW JA FACE", full3D=True)) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, "flow15_flow.hds") assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, "CBC", "FLOW-JA-FACE")] assert array_util.array_comp(budget_frf_valid, budget_frf) # clean up sim.delete_output_files() return
def test006_2models_mvr(): # init paths test_ex_name = 'test006_2models_mvr' sim_name = 'test006_2models_mvr' model_names = ['parent', 'child'] pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'model1_unch.hds') expected_head_file_aa = os.path.join(expected_output_folder, 'model2_unch.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'model1_unch.cbc') expected_head_file_b = os.path.join(expected_output_folder, 'model1_adj.hds') expected_head_file_bb = os.path.join(expected_output_folder, 'model2_adj.hds') # load simulation sim = MFSimulation.load(sim_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'model1.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) head_file = os.path.join(os.getcwd(), expected_head_file_aa) head_new = os.path.join(run_folder, 'model2.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_obj.list_records() # test getting models model_dict = sim.model_dict assert len(model_dict) == 2 for model in model_dict.values(): assert model.name in model_names names = sim.model_names assert len(names) == 2 for name in names: assert name in model_names model = sim.get_model(name) assert model.model_type == 'gwf' models = sim.gwf assert len(models) == 2 for model in models: assert model.name in model_names assert model.model_type == 'gwf' # change some settings parent_model = sim.get_model(model_names[0]) maw_pkg = parent_model.get_package('maw') period_data = maw_pkg.perioddata.get_data() period_data[0][0][2] = -1.0 maw_pkg.perioddata.set_data(period_data[0], 0) well_rec_data = maw_pkg.packagedata.get_data() assert (well_rec_data[0][0] == 0) exg_pkg = sim.get_exchange_file('simulation.exg') exg_data = exg_pkg.exchangedata.get_data() for index in range(0, len(exg_data)): exg_data[index][6] = 500.0 exg_pkg.exchangedata.set_data(exg_data) # test getting packages pkg_dict = parent_model.package_dict assert len(pkg_dict) == 6 pkg_names = parent_model.package_names assert len(pkg_names) == 6 # confirm that this is a copy of the original dictionary with references # to the packages del pkg_dict[pkg_names[0]] assert len(pkg_dict) == 5 pkg_dict = parent_model.package_dict assert len(pkg_dict) == 6 old_val = pkg_dict['dis'].nlay.get_data() pkg_dict['dis'].nlay = 22 pkg_dict = parent_model.package_dict assert pkg_dict['dis'].nlay.get_data() == 22 pkg_dict['dis'].nlay = old_val # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'model1.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) head_file = os.path.join(os.getcwd(), expected_head_file_bb) head_new = os.path.join(save_folder, 'model2.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # clean up sim.delete_output_files() return
def test045_lake1ss_table(): # init paths test_ex_name = "test045_lake1ss_table" model_name = "lakeex1b" pth = os.path.join("..", "examples", "data", "mf6", test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, "temp") if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, "expected_output") expected_head_file_a = os.path.join(expected_output_folder, "lakeex1b_unch.hds") expected_head_file_b = os.path.join(expected_output_folder, "lakeex1b_adj.hds") # load simulation sim = MFSimulation.load(model_name, "mf6", exe_name, pth, verify_data=True) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, "lakeex1b.hds") outfile = os.path.join(run_folder, "headcompare_a.txt") success = pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) assert success # change some settings model = sim.get_model(model_name) laktbl = model.get_package("tab").table laktbl_data = laktbl.get_data() laktbl_data[-1][0] = 700.0 laktbl.set_data(laktbl_data) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, "lakeex1b.hds") outfile = os.path.join(run_folder, "headcompare_b.txt") success = pymake.compare_heads(None, None, files1=head_file, files2=head_new, outfile=outfile) assert success # clean up sim.delete_output_files() return
def test003_gwfs_disv(): # init paths test_ex_name = 'test003_gwfs_disv' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'model_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'model_adj.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'model_unch.cbc') expected_cbc_file_b = os.path.join(expected_output_folder, 'model_adj.cbc') array_util = PyListUtil() # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verify_data=True) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.simulation_data.max_columns_of_data = 10 sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='auto') budget_fjf_valid = np.array( budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'model.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')] assert array_util.array_comp(budget_fjf_valid, budget_frf) model = sim.get_model(model_name) if shapefile: model.export('{}/{}.shp'.format(pth, test_ex_name)) # change some settings chd_head_left = model.get_package('CHD_LEFT') chd_left_period = chd_head_left.stress_period_data.get_data(0) chd_left_period[4][1] = 15.0 chd_head_left.stress_period_data.set_data(chd_left_period, 0) chd_head_right = model.get_package('CHD_RIGHT') chd_right_period = chd_head_right.stress_period_data chd_right_data = chd_right_period.get_data(0) chd_right_data_slice = chd_right_data[3:10] chd_right_period.set_data(chd_right_data_slice, 0) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_fjf_valid = np.array( budget_obj.get_data(text='FLOW JA FACE', full3D=True)) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'model.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')] assert array_util.array_comp(budget_fjf_valid, budget_frf) # clean up sim.delete_output_files() return
def test006_2models_mvr(): # init paths test_ex_name = "test006_2models_mvr" sim_name = "test006_2models_mvr" model_names = ["parent", "child"] pth = os.path.join("..", "examples", "data", "mf6", test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, "temp") if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, "expected_output") expected_head_file_a = os.path.join(expected_output_folder, "model1_unch.hds") expected_head_file_aa = os.path.join(expected_output_folder, "model2_unch.hds") expected_cbc_file_a = os.path.join(expected_output_folder, "model1_unch.cbc") expected_head_file_b = os.path.join(expected_output_folder, "model1_adj.hds") expected_head_file_bb = os.path.join(expected_output_folder, "model2_adj.hds") # load simulation sim = MFSimulation.load(sim_name, "mf6", exe_name, pth, verify_data=True) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.set_all_data_external() sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, "model1.hds") assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) head_file = os.path.join(os.getcwd(), expected_head_file_aa) head_new = os.path.join(run_folder, "model2.hds") assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision="double") budget_obj.list_records() # test getting models model_dict = sim.model_dict assert len(model_dict) == 2 for model in model_dict.values(): assert model.name in model_names names = sim.model_names assert len(names) == 2 for name in names: assert name in model_names model = sim.get_model(name) assert model.model_type == "gwf" models = sim.gwf assert len(models) == 2 for model in models: assert model.name in model_names assert model.model_type == "gwf" # change some settings parent_model = sim.get_model(model_names[0]) maw_pkg = parent_model.get_package("maw") period_data = maw_pkg.perioddata.get_data() period_data[0][0][2] = -1.0 maw_pkg.perioddata.set_data(period_data[0], 0) well_rec_data = maw_pkg.packagedata.get_data() assert well_rec_data[0][0] == 0 exg_pkg = sim.get_exchange_file("simulation.exg") exg_data = exg_pkg.exchangedata.get_data() for index in range(0, len(exg_data)): exg_data[index][6] = 500.0 exg_pkg.exchangedata.set_data(exg_data) # test getting packages pkg_dict = parent_model.package_dict assert len(pkg_dict) == 6 pkg_names = parent_model.package_names assert len(pkg_names) == 6 # confirm that this is a copy of the original dictionary with references # to the packages del pkg_dict[pkg_names[0]] assert len(pkg_dict) == 5 pkg_dict = parent_model.package_dict assert len(pkg_dict) == 6 old_val = pkg_dict["dis"].nlay.get_data() pkg_dict["dis"].nlay = 22 pkg_dict = parent_model.package_dict assert pkg_dict["dis"].nlay.get_data() == 22 pkg_dict["dis"].nlay = old_val # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, "model1.hds") assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) head_file = os.path.join(os.getcwd(), expected_head_file_bb) head_new = os.path.join(save_folder, "model2.hds") assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # clean up sim.delete_output_files() # test load_only model_package_check = ["ic", "maw", "npf", "oc"] load_only_lists = [ ["ic6", "npf6", "oc", "gwf6-gwf6", "ims"], ["ic", "maw", "npf", "gwf-gwf", "ims"], ["ic", "maw6", "npf"], ] for load_only in load_only_lists: sim = MFSimulation.load(sim_name, "mf6", exe_name, pth, load_only=load_only) for model_name in model_names: model = sim.get_model(model_name) for package in model_package_check: assert (package in model.package_type_dict or package in sim.package_type_dict) == ( package in load_only or "{}6".format(package) in load_only) assert (len(sim._exchange_files) > 0) == ("gwf6-gwf6" in load_only or "gwf-gwf" in load_only) assert (len(sim._ims_files) > 0) == ("ims6" in load_only or "ims" in load_only) # load package by name load_only_list = ["ic6", "maw", "npf_p1", "oc_p2", "ims"] sim = MFSimulation.load(sim_name, "mf6", exe_name, pth, load_only=load_only_list) model_parent = sim.get_model("parent") model_child = sim.get_model("child") assert "oc" not in model_parent.package_type_dict assert "oc" in model_child.package_type_dict assert "npf" in model_parent.package_type_dict assert "npf" not in model_child.package_type_dict if run: # test running a runnable load_only case sim = MFSimulation.load(sim_name, "mf6", exe_name, pth, load_only=load_only_lists[0]) assert sim.run_simulation()[0] return
def test006_gwf3(): # init paths test_ex_name = 'test006_gwf3' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'flow_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'flow_adj.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'flow_unch.cbc') expected_cbc_file_b = os.path.join(expected_output_folder, 'flow_adj.cbc') array_util = PyListUtil() # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verify_data=True) model = sim.get_model() disu = model.get_package('disu') # test switching disu array to internal array disu.ja = disu.ja.array # test writing hwva and cl12 arrays out to different locations disu.hwva = { 'filename': 'flow.disu.hwva_new.dat', 'factor': 1.0, 'data': disu.hwva.array } disu.cl12 = { 'filename': 'flow.disu.cl12_new.dat', 'factor': 1.0, 'data': disu.cl12.array } # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.set_all_data_external() sim.write_simulation() if run: # run simulation sim.run_simulation() budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_fjf_valid = np.array( budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) jaentries = budget_fjf_valid.shape[-1] budget_fjf_valid.shape = (-1, jaentries) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_fjf = np.array(sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')]) assert array_util.array_comp(np.array(budget_fjf_valid), np.array(budget_fjf)) # change some settings model = sim.get_model(model_name) hk = model.get_package('npf').k hk_data = hk.get_data() hk_data[2] = 3.5 hk.set_data(hk_data) ex_happened = False try: hk.make_layered() except: ex_happened = True assert (ex_happened) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision='auto') budget_fjf_valid = np.array( budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) jaentries = budget_fjf_valid.shape[-1] budget_fjf_valid.shape = (-1, jaentries) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_fjf = np.array(sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')]) assert array_util.array_comp(np.array(budget_fjf_valid), np.array(budget_fjf)) # confirm that files did move save_folder = os.path.join(run_folder, 'temp_two') sim.simulation_data.mfpath.set_sim_path(save_folder) # write with "copy_external_files" turned off so external files do not get copied to new location sim.write_simulation( ext_file_action=flopy.mf6.mfbase.ExtFileAction.copy_none) # store strt in an external binary file model = sim.get_model() ic = model.get_package('ic') ic.strt.store_as_external_file('initial_heads.bin', binary=True) strt_data = ic.strt.array # update packages sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_fjf_valid = np.array( budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) jaentries = budget_fjf_valid.shape[-1] budget_fjf_valid.shape = (-1, jaentries) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'flow.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_fjf = np.array(sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')]) assert array_util.array_comp(np.array(budget_fjf_valid), np.array(budget_fjf)) # confirm that files did not move assert not os.path.isfile(os.path.join(save_folder, 'flow.disu.ja.dat')) assert not os.path.isfile( os.path.join(save_folder, 'flow.disu.iac.dat')) assert not os.path.isfile( os.path.join(save_folder, 'flow.disu.cl12.dat')) assert not os.path.isfile( os.path.join(save_folder, 'flow.disu.area.dat')) assert not os.path.isfile( os.path.join(save_folder, 'flow.disu.hwva.dat')) # confirm external binary file was created assert os.path.isfile(os.path.join(save_folder, 'initial_heads.bin')) # clean up sim.delete_output_files() return
def test001e_uzf_3lay(): # init paths test_ex_name = "test001e_UZF_3lay" model_name = "gwf_1" pth = os.path.join("..", "examples", "data", "mf6", test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, "temp") if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, "expected_output") expected_head_file_a = os.path.join(expected_output_folder, "test001e_UZF_3lay_unch.hds") expected_head_file_b = os.path.join(expected_output_folder, "test001e_UZF_3lay_adj.hds") # load simulation sim = MFSimulation.load(model_name, "mf6", exe_name, pth, verify_data=True) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.write_simulation() if run: # run simulation sim.run_simulation() # # compare output to expected results # head_file = os.path.join(os.getcwd(), expected_head_file_a) # head_new = os.path.join(run_folder, "test001e_UZF_3lay.hds") # assert pymake.compare_heads( # None, None, files1=head_file, files2=head_new, verbose=True # ) # change some settings model = sim.get_model(model_name) uzf = model.get_package("uzf") uzf_data = uzf.packagedata uzf_array = uzf_data.get_data() # increase initial water content for index in range(0, len(uzf_array)): uzf_array[index][7] = 0.3 uzf_data.set_data(uzf_array) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, "test001e_UZF_3lay.hds") outfile = os.path.join(save_folder, "head_compare.dat") # assert pymake.compare_heads( # None, # None, # files1=head_file, # files2=head_new, # outfile=outfile, # verbose=True, # ) # test load_only model_package_check = ["chd", "ic", "npf", "oc", "sto", "uzf"] load_only_lists = [ ["chd6", "ic6", "ims", "npf6", "obs", "oc", "sto"], ["chd6", "ims", "npf6", "obs", "oc", "sto", "uzf6"], ["chd", "ic", "npf", "obs", "sto"], ["ic6", "ims", "obs6", "oc6"], ] for load_only in load_only_lists: sim = MFSimulation.load(model_name, "mf6", exe_name, pth, load_only=load_only) model = sim.get_model() for package in model_package_check: assert (package in model.package_type_dict) == (package in load_only or "{}6".format(package) in load_only) if run: # test running a runnable load_only case sim = MFSimulation.load(model_name, "mf6", exe_name, pth, load_only=load_only_lists[0]) assert sim.run_simulation()[0]
def test006_2models_mvr(): # init paths test_ex_name = 'test006_2models_mvr' sim_name = 'test006_2models_mvr' model_names = ['parent', 'child'] pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'model1_unch.hds') expected_head_file_aa = os.path.join(expected_output_folder, 'model2_unch.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'model1_unch.cbc') expected_head_file_b = os.path.join(expected_output_folder, 'model1_adj.hds') expected_head_file_bb = os.path.join(expected_output_folder, 'model2_adj.hds') # load simulation sim = MFSimulation.load(sim_name, 'mf6', exe_name, pth, verify_data=True) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.set_all_data_external() sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'model1.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) head_file = os.path.join(os.getcwd(), expected_head_file_aa) head_new = os.path.join(run_folder, 'model2.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_obj.list_records() # test getting models model_dict = sim.model_dict assert len(model_dict) == 2 for model in model_dict.values(): assert model.name in model_names names = sim.model_names assert len(names) == 2 for name in names: assert name in model_names model = sim.get_model(name) assert model.model_type == 'gwf' models = sim.gwf assert len(models) == 2 for model in models: assert model.name in model_names assert model.model_type == 'gwf' # change some settings parent_model = sim.get_model(model_names[0]) maw_pkg = parent_model.get_package('maw') period_data = maw_pkg.perioddata.get_data() period_data[0][0][2] = -1.0 maw_pkg.perioddata.set_data(period_data[0], 0) well_rec_data = maw_pkg.packagedata.get_data() assert (well_rec_data[0][0] == 0) exg_pkg = sim.get_exchange_file('simulation.exg') exg_data = exg_pkg.exchangedata.get_data() for index in range(0, len(exg_data)): exg_data[index][6] = 500.0 exg_pkg.exchangedata.set_data(exg_data) # test getting packages pkg_dict = parent_model.package_dict assert len(pkg_dict) == 6 pkg_names = parent_model.package_names assert len(pkg_names) == 6 # confirm that this is a copy of the original dictionary with references # to the packages del pkg_dict[pkg_names[0]] assert len(pkg_dict) == 5 pkg_dict = parent_model.package_dict assert len(pkg_dict) == 6 old_val = pkg_dict['dis'].nlay.get_data() pkg_dict['dis'].nlay = 22 pkg_dict = parent_model.package_dict assert pkg_dict['dis'].nlay.get_data() == 22 pkg_dict['dis'].nlay = old_val # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'model1.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) head_file = os.path.join(os.getcwd(), expected_head_file_bb) head_new = os.path.join(save_folder, 'model2.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # clean up sim.delete_output_files() # test load_only model_package_check = ['ic', 'maw', 'npf', 'oc'] load_only_lists = [['ic6', 'npf6', 'oc', 'gwf6-gwf6', 'ims'], ['ic', 'maw', 'npf', 'gwf-gwf', 'ims'], ['ic', 'maw6', 'npf']] for load_only in load_only_lists: sim = MFSimulation.load(sim_name, 'mf6', exe_name, pth, load_only=load_only) for model_name in model_names: model = sim.get_model(model_name) for package in model_package_check: assert (package in model.package_type_dict or package in sim.package_type_dict) == \ (package in load_only or '{}6'.format(package) in load_only) assert (len(sim._exchange_files) > 0) == ('gwf6-gwf6' in load_only or 'gwf-gwf' in load_only) assert (len(sim._ims_files) > 0) == ('ims6' in load_only or 'ims' in load_only) # load package by name load_only_list = ['ic6', 'maw', 'npf_p1', 'oc_p2', 'ims'] sim = MFSimulation.load(sim_name, 'mf6', exe_name, pth, load_only=load_only_list) model_parent = sim.get_model('parent') model_child = sim.get_model('child') assert 'oc' not in model_parent.package_type_dict assert 'oc' in model_child.package_type_dict assert 'npf' in model_parent.package_type_dict assert 'npf' not in model_child.package_type_dict if run: # test running a runnable load_only case sim = MFSimulation.load(sim_name, 'mf6', exe_name, pth, load_only=load_only_lists[0]) assert sim.run_simulation()[0] return
def test045_lake2tr(): # init paths test_ex_name = "test045_lake2tr" model_name = "lakeex2a" pth = os.path.join("..", "examples", "data", "mf6", test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, "temp") if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, "expected_output") expected_head_file_a = os.path.join(expected_output_folder, "lakeex2a_unch.hds") expected_head_file_b = os.path.join(expected_output_folder, "lakeex2a_adj.hds") # load simulation sim = MFSimulation.load(model_name, "mf6", exe_name, pth, verify_data=True) # write simulation to new location sim.simulation_data.mfpath.set_sim_path(run_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, "lakeex2a.hds") assert pymake.compare_heads( None, None, files1=head_file, files2=head_new, htol=10.0, ) # change some settings model = sim.get_model(model_name) evt = model.get_package("evt") evt.rate.set_data([0.05], key=0) lak = model.get_package("lak") lak_period = lak.perioddata lak_period_data = lak_period.get_data() lak_period_data[0][2][2] = "0.05" lak_period.set_data(lak_period_data[0], 0) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, "lakeex2a.hds") assert pymake.compare_heads( None, None, files1=head_file, files2=head_new, htol=10.0, )
def test036_twrihfb(): # init paths test_ex_name = 'test036_twrihfb' model_name = 'twrihfb2015' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'twrihfb2015_output_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'twrihfb2015_output_adj.hds') # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth, verify_data=True) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.set_all_data_external() sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'twrihfb2015_output.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) # change some settings hydchr = sim.simulation_data.mfdata[(model_name, 'hfb', 'period', 'stress_period_data')] hydchr_data = hydchr.get_data() hydchr_data[0][2][2] = 0.000002 hydchr_data[0][3][2] = 0.000003 hydchr_data[0][4][2] = 0.0000004 hydchr.set_data(hydchr_data[0], 0) cond = sim.simulation_data.mfdata[(model_name, 'drn', 'period', 'stress_period_data')] cond_data = cond.get_data() for index in range(0, len(cond_data[0])): cond_data[0][index][2] = 2.1 cond.set_data(cond_data[0], 0) rch = sim.simulation_data.mfdata[(model_name, 'rcha', 'period', 'recharge')] rch_data = rch.get_data() assert (rch_data[0][5, 1] == 0.00000003) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'twrihfb2015_output.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new)
def test003_gwfs_disv(): # init paths test_ex_name = 'test003_gwfs_disv' model_name = 'gwf_1' pth = os.path.join('..', 'examples', 'data', 'mf6', test_ex_name) run_folder = os.path.join(cpth, test_ex_name) if not os.path.isdir(run_folder): os.makedirs(run_folder) save_folder = os.path.join(run_folder, 'temp') if not os.path.isdir(save_folder): os.makedirs(save_folder) expected_output_folder = os.path.join(pth, 'expected_output') expected_head_file_a = os.path.join(expected_output_folder, 'model_unch.hds') expected_head_file_b = os.path.join(expected_output_folder, 'model_adj.hds') expected_cbc_file_a = os.path.join(expected_output_folder, 'model_unch.cbc') expected_cbc_file_b = os.path.join(expected_output_folder, 'model_adj.cbc') array_util = PyListUtil() # load simulation sim = MFSimulation.load(model_name, 'mf6', exe_name, pth) # make temp folder to save simulation sim.simulation_data.mfpath.set_sim_path(run_folder) # write simulation to new location sim.simulation_data.max_columns_of_data = 10 sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_a) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_fjf_valid = np.array(budget_obj.get_data(text=' FLOW JA FACE', full3D=True)) head_file = os.path.join(os.getcwd(), expected_head_file_a) head_new = os.path.join(run_folder, 'model.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')] assert array_util.array_comp(budget_fjf_valid, budget_frf) model = sim.get_model(model_name) model.export('{}/{}.shp'.format(pth, test_ex_name)) # change some settings chd_head_left = model.get_package('CHD_LEFT') chd_left_period = chd_head_left.stress_period_data.array chd_left_period[0][4][1] = 15.0 chd_head_right = model.get_package('CHD_RIGHT') chd_right_period = chd_head_right.stress_period_data chd_right_data = chd_right_period.get_data(0) chd_right_data_slice = chd_right_data[3:10] chd_right_period.set_data(chd_right_data_slice, 0) # write simulation again sim.simulation_data.mfpath.set_sim_path(save_folder) sim.write_simulation() if run: # run simulation sim.run_simulation() # get expected results budget_file = os.path.join(os.getcwd(), expected_cbc_file_b) budget_obj = bf.CellBudgetFile(budget_file, precision='double') budget_fjf_valid = np.array(budget_obj.get_data(text='FLOW JA FACE', full3D=True)) # compare output to expected results head_file = os.path.join(os.getcwd(), expected_head_file_b) head_new = os.path.join(save_folder, 'model.hds') assert pymake.compare_heads(None, None, files1=head_file, files2=head_new) budget_frf = sim.simulation_data.mfdata[(model_name, 'CBC', 'FLOW-JA-FACE')] assert array_util.array_comp(budget_fjf_valid, budget_frf) # clean up sim.delete_output_files() return