def test_user_logger(self):
logger = logging.getLogger(__name__)
with tempfile.NamedTemporaryFile() as log_file:
log_handler = gateway_logging.user_logger(log_file.name)
logger.addHandler(log_handler)
test_log = 'Test log'
logger.info(test_log)
log_handler.close()
# file has data
log_content = log_file.read().decode()
self.assertNotEqual(0, len(log_content))
self.assertIn(test_log, log_content)
def test_user_logger(self):
logger = logging.getLogger(__name__)
log_file = 'test_log_file.log'
log_handler = gateway_logging.user_logger(log_file)
logger.addHandler(log_handler)
for i in range(0, 100):
logger.info('Test log %d', i)
log_handler.close()
# file has data
self.assertNotEquals(0, os.path.getsize(log_file))
os.remove(log_file)
def exp_start(self, user, exp_id, # pylint: disable=R0913
firmware_path=None, profile_dict=None, timeout=0):
"""
Start an experiment
:param exp_id: experiment id
:param user: user running the experiment
:param firmware_path: path of the firmware file to use, can be None
:param profile_dict: monitoring profile
:param timeout: Experiment expiration timeout. On 0 no timeout.
Experiment start steps
1) Prepare Gateway: User experiment files and log:
2) Prepare Control node: Start communication and power on open node
3) Prepare Open node: Check OK, setup firmware and serial redirection
4) Configure Control Node Profile and experiment
5) Set Experiment expiration timer
"""
if self.experiment_is_running:
LOGGER.debug('Experiment running. Stop previous experiment')
self.exp_stop()
try:
profile = self.board_cfg.profile_from_dict(profile_dict)
except ValueError as err:
LOGGER.error('%r', err)
return 1
if not elftarget.is_compatible_with_node(firmware_path,
self.open_node):
LOGGER.error('Invalid firmware target, aborting experiment.')
return 1
ret_val = 0
self.experiment_is_running = True
self.exp_id = exp_id
self.user = user
if (self.board_cfg.robot_type == 'turtlebot2' or
self.board_cfg.cn_class.TYPE == 'no'): # pragma: no cover
LOGGER.info('Create user exp folder')
self._create_user_exp_folders(user, exp_id)
self.exp_files = self.create_user_exp_files(self.board_cfg.node_id,
user, exp_id)
# Create user log
self.user_log_handler = gateway_logging.user_logger(
self.exp_files['log'])
LOGGER.addHandler(self.user_log_handler)
LOGGER.info('Start experiment: %s-%i', user, exp_id)
# Init ControlNode
ret_val += self.control_node.start(self.exp_id, self.exp_files)
# with Pycom boards, trigger 2 power-cycle to ensure REPL is correctly
# started
if self.open_node.TYPE == 'pycom':
for _ in range(2):
LOGGER.debug("Power cycle %s board", self.open_node.TYPE)
ret_val += self.control_node.open_stop()
ret_val += wait_no_tty(self.open_node.TTY, timeout=10)
ret_val += self.control_node.open_start()
ret_val += wait_tty(self.open_node.TTY, LOGGER, timeout=10)
# Configure Open Node
ret_val += self.open_node.setup(firmware_path)
# Configure experiment and monitoring on ControlNode
ret_val += self.control_node.start_experiment(profile)
# nrf52dk and nrf52840dk needs a power cycle before their serial
# becomes fully usable.
if (firmware_path is not None and
self._board_require_power_cycle(self.open_node.TYPE)):
LOGGER.info("Power cycle node %s",
self.control_node.node_id.replace('_', '-'))
ret_val += self.control_node.open_stop()
ret_val += self.control_node.open_start()
if timeout != 0:
LOGGER.debug("Setting timeout to: %d", timeout)
self.timeout_timer = Timer(timeout, self._timeout_exp_stop,
args=(exp_id, user))
self.timeout_timer.start()
LOGGER.info("Start experiment succeeded")
return ret_val
def exp_start(self, user, exp_id, # pylint: disable=R0913
firmware_path=None, profile_dict=None, timeout=0):
"""
Start an experiment
:param exp_id: experiment id
:param user: user running the experiment
:param firmware_path: path of the firmware file to use, can be None
:param profile_dict: monitoring profile
:param timeout: Experiment expiration timeout. On 0 no timeout.
Experiment start steps
1) Prepare Gateway: User experiment files and log:
2) Prepare Control node: Start communication and power on open node
3) Prepare Open node: Check OK, setup firmware and serial redirection
4) Configure Control Node Profile and experiment
5) Set Experiment expiration timer
"""
if self.experiment_is_running:
LOGGER.debug('Experiment running. Stop previous experiment')
self.exp_stop()
try:
profile = self.board_cfg.profile_from_dict(profile_dict)
except ValueError as err:
LOGGER.error('%r', err)
return 1
if not elftarget.is_compatible_with_node(firmware_path,
self.open_node):
LOGGER.error('Invalid firmware target, aborting experiment.')
return 1
ret_val = 0
self.experiment_is_running = True
self.exp_id = exp_id
self.user = user
if (self.board_cfg.robot_type == 'turtlebot2' or
self.board_cfg.cn_class.TYPE == 'no'): # pragma: no cover
LOGGER.info('Create user exp folder')
self._create_user_exp_folders(user, exp_id)
self.exp_files = self.create_user_exp_files(self.board_cfg.node_id,
user, exp_id)
# Create user log
self.user_log_handler = gateway_logging.user_logger(
self.exp_files['log'])
LOGGER.addHandler(self.user_log_handler)
LOGGER.info('Start experiment: %s-%i', user, exp_id)
# Init ControlNode
ret_val += self.control_node.start(self.exp_id, self.exp_files)
# Configure Open Node
ret_val += self.open_node.setup(firmware_path)
# Configure experiment and monitoring on ControlNode
ret_val += self.control_node.start_experiment(profile)
if timeout != 0:
LOGGER.debug("Setting timeout to: %d", timeout)
self.timeout_timer = Timer(timeout, self._timeout_exp_stop,
args=(exp_id, user))
self.timeout_timer.start()
LOGGER.info("Start experiment succeeded")
return ret_val
