コード例 #1
0
class GDBServer(threading.Thread):
    """
    This class start a GDB server listening a gdb connection on a specific port.
    It implements the RSP (Remote Serial Protocol).
    """
    def __init__(self, board, port_urlWSS):
        threading.Thread.__init__(self)
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.abstract_socket = None
        self.wss_server = None
        self.port = 0
        if isinstance(port_urlWSS, str) == True:
            self.wss_server = port_urlWSS
        else:
            self.port = port_urlWSS
        self.packet_size = 2048
        self.flashData = list()
        self.conn = None
        self.lock = threading.Lock()
        self.shutdown_event = threading.Event()
        self.detach_event = threading.Event()
        self.quit = False
        if self.wss_server == None:
            self.abstract_socket = GDBSocket(self.port, self.packet_size)
        else:
            self.abstract_socket = GDBWebSocket(self.wss_server)
        self.setDaemon(True)
        self.start()

    def restart(self):
        if self.isAlive():
            self.detach_event.set()

    def stop(self):
        if self.isAlive():
            self.shutdown_event.set()
            while self.isAlive():
                pass
            logging.info("GDB server thread killed")
        self.board.uninit()

    def setBoard(self, board, stop=True):
        self.lock.acquire()
        if stop:
            self.restart()
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.lock.release()
        return

    def run(self):
        while True:
            new_command = False
            data = ""
            logging.info('GDB server started at port:%d', self.port)

            self.shutdown_event.clear()
            self.detach_event.clear()

            while not self.shutdown_event.isSet(
            ) and not self.detach_event.isSet():
                connected = self.abstract_socket.connect()
                if connected != None:
                    break

            if self.shutdown_event.isSet():
                return

            if self.detach_event.isSet():
                continue

            logging.info("One client connected!")

            while True:

                if self.shutdown_event.isSet():
                    return

                if self.detach_event.isSet():
                    continue

                # read command
                while True:
                    if (new_command == True):
                        new_command = False
                        break
                    try:
                        if self.shutdown_event.isSet(
                        ) or self.detach_event.isSet():
                            break
                        self.abstract_socket.setBlocking(0)
                        data += self.abstract_socket.read()
                        if data.index("$") >= 0 and data.index("#") >= 0:
                            break
                    except (ValueError, socket.error):
                        pass

                if self.shutdown_event.isSet():
                    return

                if self.detach_event.isSet():
                    continue

                self.abstract_socket.setBlocking(1)

                data = data[data.index("$"):]

                self.lock.acquire()

                if len(data) != 0:
                    # decode and prepare resp
                    [resp, ack, detach] = self.handleMsg(data)

                    if resp is not None:
                        # ack
                        if ack:
                            resp = "+" + resp
                        # send resp
                        self.abstract_socket.write(resp)
                        # wait a '+' from the client
                        try:
                            data = self.abstract_socket.read()
                            if data[0] != '+':
                                logging.debug('gdb client has not ack!')
                            else:
                                logging.debug('gdb client has ack!')
                            if data.index("$") >= 0 and data.index("#") >= 0:
                                new_command = True
                        except:
                            pass

                    if detach:
                        self.abstract_socket.close()
                        self.lock.release()
                        break

                self.lock.release()

    def handleMsg(self, msg):

        if msg[0] != '$':
            logging.debug('msg ignored: first char != $')
            return None, 0, 0

        #logging.debug('-->>>>>>>>>>>> GDB rsp packet: %s', msg)

        # query command
        if msg[1] == 'q':
            return self.handleQuery(msg[2:]), 1, 0

        elif msg[1] == 'H':
            return self.createRSPPacket(''), 1, 0

        elif msg[1] == '?':
            return self.lastSignal(), 1, 0

        elif msg[1] == 'g':
            return self.getRegister(), 1, 0

        elif msg[1] == 'p':
            return self.readRegister(msg[2:]), 1, 0

        elif msg[1] == 'P':
            return self.writeRegister(msg[2:]), 1, 0

        elif msg[1] == 'm':
            return self.getMemory(msg[2:]), 1, 0

        elif msg[1] == 'X':
            return self.writeMemory(msg[2:]), 1, 0

        elif msg[1] == 'v':
            return self.flashOp(msg[2:]), 1, 0

        # we don't send immediately the response for C and S commands
        elif msg[1] == 'C' or msg[1] == 'c':
            return self.resume()

        elif msg[1] == 'S' or msg[1] == 's':
            return self.step()

        elif msg[1] == 'Z' or msg[1] == 'z':
            return self.breakpoint(msg[1:]), 1, 0

        elif msg[1] == 'D':
            return self.detach(msg[1:]), 1, 1

        elif msg[1] == 'k':
            return self.kill(), 1, 1

        else:
            logging.error("Unknown RSP packet: %s", msg)
            return self.createRSPPacket(""), 1, 0

    def detach(self, data):
        resp = "OK"
        return self.createRSPPacket(resp)

    def kill(self):
        return self.createRSPPacket("")

    def breakpoint(self, data):
        # handle Z1/z1 commands
        addr = int(data.split(',')[1], 16)
        if data[1] == '1':
            if data[0] == 'Z':
                if self.target.setBreakpoint(addr) == False:
                    resp = "ENN"
                    return self.createRSPPacket(resp)
            else:
                self.target.removeBreakpoint(addr)
            resp = "OK"
            return self.createRSPPacket(resp)

        return None

    def resume(self):
        self.ack()
        self.target.resume()
        self.abstract_socket.setBlocking(0)

        # Try to set break point at hardfault handler to avoid
        # halting target constantly
        if (self.target.availableBreakpoint() >= 1):
            bpSet = True
            hardfault_handler = self.target.readMemory(4 * 3)
            self.target.setBreakpoint(hardfault_handler)
        else:
            bpSet = False
            logging.info(
                "No breakpoint available. Interfere target constantly.")

        val = ''

        while True:
            sleep(0.01)
            if self.shutdown_event.isSet():
                return self.createRSPPacket(val), 0, 0

            try:
                data = self.abstract_socket.read()
                if (data[0] == '\x03'):
                    self.target.halt()
                    val = 'S05'
                    logging.debug("receive CTRL-C")
                    break
            except:
                pass

            if self.target.getState() == TARGET_HALTED:
                logging.debug("state halted")
                xpsr = self.target.readCoreRegister('xpsr')
                # Get IPSR value from XPSR
                if (xpsr & 0x1f) == 3:
                    val = "S" + FAULT[3]
                else:
                    val = 'S05'
                break

            if not bpSet:
                # Only do this when no bp available as it slows resume operation
                self.target.halt()
                xpsr = self.target.readCoreRegister('xpsr')
                logging.debug("GDB resume xpsr: 0x%X", xpsr)
                # Get IPSR value from XPSR
                if (xpsr & 0x1f) == 3:
                    val = "S" + FAULT[3]
                    break
                self.target.resume()

        if bpSet:
            self.target.removeBreakpoint(hardfault_handler)

        self.abstract_socket.setBlocking(1)
        return self.createRSPPacket(val), 0, 0

    def step(self):
        self.ack()
        self.target.step()
        return self.createRSPPacket("S05"), 0, 0

    def halt(self):
        self.ack()
        self.target.halt()
        return self.createRSPPacket("S05"), 0, 0

    def flashOp(self, data):
        ops = data.split(':')[0]
        logging.debug("flash op: %s", ops)

        if ops == 'FlashErase':
            self.flash.init()
            self.flash.eraseAll()
            return self.createRSPPacket("OK")

        elif ops == 'FlashWrite':
            write_addr = int(data.split(':')[1], 16)
            logging.debug("flash write addr: 0x%s", write_addr)
            # search for second ':' (beginning of data encoded in the message)
            second_colon = 0
            idx_begin = 0
            while second_colon != 2:
                if data[idx_begin] == ':':
                    second_colon += 1
                idx_begin += 1

            # if there's gap between sections, fill it
            flash_watermark = len(self.flashData)
            pad_size = write_addr - flash_watermark
            if pad_size > 0:
                self.flashData += [0xFF] * pad_size

            # append the new data if it doesn't overlap existing data
            if write_addr >= flash_watermark:
                self.flashData += self.unescape(data[idx_begin:len(data) - 3])
            else:
                logging.error(
                    "Invalid FlashWrite address %d overlaps current data of size %d",
                    write_addr, flash_watermark)

            return self.createRSPPacket("OK")

        # we need to flash everything
        elif 'FlashDone' in ops:
            flashPtr = 0
            bytes_to_be_written = len(self.flashData)
            """
            bin = open(os.path.join(parentdir, 'res', 'bad_bin.txt'), "w+")
            
            i = 0
            while (i < bytes_to_be_written):
                bin.write(str(self.flashData[i:i+16]) + "\n")
                i += 16
            """

            logging.info("flashing %d bytes", bytes_to_be_written)

            while len(self.flashData) > 0:
                size_to_write = min(self.flash.page_size, len(self.flashData))
                #if 0 is returned from programPage, security check failed
                if (self.flash.programPage(
                        flashPtr, self.flashData[:size_to_write]) == 0):
                    logging.error(
                        "Protection bits error, flashing has stopped")
                    return None
                flashPtr += size_to_write

                self.flashData = self.flashData[size_to_write:]

                # print progress bar
                sys.stdout.write('\r')
                i = int((float(flashPtr) / float(bytes_to_be_written)) * 20.0)
                # the exact output you're looking for:
                sys.stdout.write("[%-20s] %d%%" % ('=' * i, 5 * i))
                sys.stdout.flush()

            sys.stdout.write("\n\r")

            self.flashData = []
            """
            bin.close()
            """

            # reset and stop on reset handler
            self.target.resetStopOnReset()

            return self.createRSPPacket("OK")

        elif 'Cont' in ops:
            if 'Cont?' in ops:
                return self.createRSPPacket("vCont;c;s;t")

        return None

    def unescape(self, data):
        data_idx = 0

        # unpack the data into binary array
        str_unpack = str(len(data)) + 'B'
        data = unpack(str_unpack, data)
        data = list(data)

        # check for escaped characters
        while data_idx < len(data):
            if data[data_idx] == 0x7d:
                data.pop(data_idx)
                data[data_idx] = data[data_idx] ^ 0x20
            data_idx += 1

        return data

    def getMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = split[1]
        length = int(length[:len(length) - 3], 16)

        val = ''

        mem = self.target.readBlockMemoryUnaligned8(addr, length)
        for x in mem:
            if x >= 0x10:
                val += hex(x)[2:4]
            else:
                val += '0' + hex(x)[2:3]

        return self.createRSPPacket(val)

    def writeMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = int(split[1].split(':')[0], 16)

        idx_begin = 0
        for i in range(len(data)):
            if data[i] == ':':
                idx_begin += 1
                break
            idx_begin += 1

        data = data[idx_begin:len(data) - 3]
        data = self.unescape(data)

        if length > 0:
            self.target.writeBlockMemoryUnaligned8(addr, data)

        return self.createRSPPacket("OK")

    def readRegister(self, data):
        num = int(data.split('#')[0], 16)
        reg = self.target.readCoreRegister(num)
        logging.debug("GDB: read reg %d: 0x%X", num, reg)
        val = self.intToHexGDB(reg)
        return self.createRSPPacket(val)

    def writeRegister(self, data):
        num = int(data.split('=')[0], 16)
        val = data.split('=')[1].split('#')[0]
        val = val[6:8] + val[4:6] + val[2:4] + val[0:2]
        logging.debug("GDB: write reg %d: 0x%X", num, int(val, 16))
        self.target.writeCoreRegister(num, int(val, 16))
        return self.createRSPPacket("OK")

    def intToHexGDB(self, val):
        val = hex(int(val))[2:]
        size = len(val)
        r = ''
        for i in range(8 - size):
            r += '0'
        r += str(val)

        resp = ''
        for i in range(4):
            resp += r[8 - 2 * i - 2:8 - 2 * i]

        return resp

    def getRegister(self):
        resp = ''
        # only core registers are printed
        for i in sorted(CORE_REGISTER.values())[4:20]:
            reg = self.target.readCoreRegister(i)
            resp += self.intToHexGDB(reg)
            logging.debug("GDB reg: %s = 0x%X", self.target.getRegisterName(i),
                          reg)
        return self.createRSPPacket(resp)

    def lastSignal(self):
        fault = self.target.readCoreRegister('xpsr') & 0xff
        try:
            fault = FAULT[fault]
        except:
            # Values above 16 are for interrupts
            fault = "17"  # SIGSTOP
            pass
        logging.debug("GDB lastSignal: %s", fault)
        return self.createRSPPacket('S' + fault)

    def handleQuery(self, msg):
        query = msg.split(':')
        logging.debug('GDB received query: %s', query)

        if query is None:
            logging.error('GDB received query packet malformed')
            return None

        if query[0] == 'Supported':
            resp = "qXfer:memory-map:read+;qXfer:features:read+;PacketSize="
            resp += hex(self.packet_size)[2:]
            return self.createRSPPacket(resp)

        elif query[0] == 'Xfer':

            if query[1] == 'features' and query[2] == 'read' and \
               query[3] == 'target.xml':
                data = query[4].split(',')
                resp = self.handleQueryXML('read_feature', int(data[0], 16),
                                           int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)

            elif query[1] == 'memory-map' and query[2] == 'read':
                data = query[4].split(',')
                resp = self.handleQueryXML('memory_map', int(data[0], 16),
                                           int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)

            else:
                return None

        elif query[0] == 'C#b4':
            return self.createRSPPacket("")

        elif query[0].find('Attached') != -1:
            return self.createRSPPacket("1")

        elif query[0].find('TStatus') != -1:
            return self.createRSPPacket("")

        elif query[0].find('Tf') != -1:
            return self.createRSPPacket("")

        elif 'Offsets' in query[0]:
            resp = "Text=0;Data=0;Bss=0"
            return self.createRSPPacket(resp)

        elif 'Symbol' in query[0]:
            resp = "OK"
            return self.createRSPPacket(resp)

        elif query[0].startswith('Rcmd,'):
            cmd = self.hexDecode(query[0][5:].split('#')[0])
            logging.debug('Remote command: %s', cmd)

            safecmd = {
                'reset': ['Reset target', 0x1],
                'halt': ['Halt target', 0x2],
                'help': ['Display this help', 0x4],
            }
            resultMask = 0x00
            if cmd == 'help':
                resp = ''
                for k, v in safecmd.items():
                    resp += '%s\t%s\n' % (k, v)
                resp = self.hexEncode(resp)
            else:
                cmdList = cmd.split(' ')
                #check whether all the cmds is valid cmd for monitor
                for cmd_sub in cmdList:
                    if not cmd_sub in safecmd:
                        #error cmd for monitor, just return directly
                        resp = ''
                        return self.createRSPPacket(resp)
                    else:
                        resultMask = resultMask | safecmd[cmd_sub][1]
                #if it's a single cmd, just launch it!
                if len(cmdList) == 1:
                    tmp = eval('self.target.%s()' % cmd_sub)
                    logging.debug(tmp)
                    resp = "OK"
                else:
                    #101 for help reset, so output reset cmd help information
                    if resultMask == 0x5:
                        resp = 'Reset the target\n'
                        resp = self.hexEncode(resp)
                    #110 for help halt, so output halt cmd help information
                    elif resultMask == 0x6:
                        resp = 'Halt the target\n'
                        resp = self.hexEncode(resp)
                    #011 for reset halt cmd, so launch self.target.resetStopOnReset()
                    elif resultMask == 0x3:
                        resp = "OK"
                        self.target.resetStopOnReset()
                    else:
                        resp = ''
            return self.createRSPPacket(resp)

        else:
            return self.createRSPPacket("")

    def handleQueryXML(self, query, offset, size):
        logging.debug('GDB query %s: offset: %s, size: %s', query, offset,
                      size)
        xml = ''
        if query == 'memory_map':
            xml = self.target.memoryMapXML
        elif query == 'read_feature':
            xml = self.target.targetXML

        size_xml = len(xml)

        prefix = 'm'

        if offset > size_xml:
            logging.error('GDB: offset target.xml > size!')
            return

        if size > (self.packet_size - 4):
            size = self.packet_size - 4

        nbBytesAvailable = size_xml - offset

        if size > nbBytesAvailable:
            prefix = 'l'
            size = nbBytesAvailable

        resp = prefix + xml[offset:offset + size]

        return resp

    def createRSPPacket(self, data):
        resp = '$' + data + '#'

        c = 0
        checksum = 0
        for c in data:
            checksum += ord(c)
        checksum = checksum % 256
        checksum = hex(checksum)

        if int(checksum[2:], 16) < 0x10:
            resp += '0'
        resp += checksum[2:]

        #logging.debug('--<<<<<<<<<<<< GDB rsp packet: %s', resp)
        return resp

    def ack(self):
        self.abstract_socket.write("+")

    def hexDecode(self, cmd):
        return ''.join(
            [chr(int(cmd[i:i + 2], 16)) for i in range(0, len(cmd), 2)])

    def hexEncode(self, string):
        return ''.join(['%02x' % ord(i) for i in string])
コード例 #2
0
ファイル: gdbserver.py プロジェクト: ervandarnell/pyOCD
class GDBServer(threading.Thread):
    """
    This class start a GDB server listening a gdb connection on a specific port.
    It implements the RSP (Remote Serial Protocol).
    """
    def __init__(self, board, port_urlWSS, options = {}):
        threading.Thread.__init__(self)
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.abstract_socket = None
        self.wss_server = None
        self.port = 0
        if isinstance(port_urlWSS, str) == True:
            self.wss_server = port_urlWSS
        else:
            self.port = port_urlWSS
        self.break_at_hardfault = bool(options.get('break_at_hardfault', True))
        self.packet_size = 2048
        self.flashData = list()
        self.flashOffset = None
        self.conn = None
        self.lock = threading.Lock()
        self.shutdown_event = threading.Event()
        self.detach_event = threading.Event()
        self.quit = False
        if self.wss_server == None:
            self.abstract_socket = GDBSocket(self.port, self.packet_size)
        else:
            self.abstract_socket = GDBWebSocket(self.wss_server)
        self.setDaemon(True)
        self.start()
    
    def restart(self):
        if self.isAlive():
            self.detach_event.set()
    
    def stop(self):
        if self.isAlive():
            self.shutdown_event.set()
            while self.isAlive():
                pass
            logging.info("GDB server thread killed")
        self.board.uninit()
        
    def setBoard(self, board, stop = True):
        self.lock.acquire()
        if stop:
            self.restart()
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.lock.release()
        return
        
    def run(self):
        while True:
            new_command = False
            data = ""
            logging.info('GDB server started at port:%d',self.port)
            
            self.shutdown_event.clear()
            self.detach_event.clear()
                
            while not self.shutdown_event.isSet() and not self.detach_event.isSet():
                connected = self.abstract_socket.connect()
                if connected != None:
                    break
            
            if self.shutdown_event.isSet():
                return
            
            if self.detach_event.isSet():
                continue
            
            logging.info("One client connected!")
            
            while True:
                
                if self.shutdown_event.isSet():
                    return
            
                if self.detach_event.isSet():
                    continue
                
                # read command
                while True:
                    if (new_command == True):
                        new_command = False
                        break
                    try:
                        if self.shutdown_event.isSet() or self.detach_event.isSet():
                            break
                        self.abstract_socket.setBlocking(0)
                        data += self.abstract_socket.read()
                        if data.index("$") >= 0 and data.index("#") >= 0:
                            break
                    except (ValueError, socket.error):
                        pass
                
                if self.shutdown_event.isSet():
                    return
            
                if self.detach_event.isSet():
                    continue
                
                self.abstract_socket.setBlocking(1)
                    
                data = data[data.index("$"):]
                
                self.lock.acquire()
            
                if len(data) != 0:
                    # decode and prepare resp
                    [resp, ack, detach] = self.handleMsg(data)
            
                    if resp is not None:
                        # ack
                        if ack:
                            resp = "+" + resp
                        # send resp
                        self.abstract_socket.write(resp)
                        # wait a '+' from the client
                        try:
                            data = self.abstract_socket.read()
                            if data[0] != '+':
                                logging.debug('gdb client has not ack!')
                            else:
                                logging.debug('gdb client has ack!')
                            if data.index("$") >= 0 and data.index("#") >= 0:
                                new_command = True
                        except:
                            pass
                        
                    if detach:
                        self.abstract_socket.close()
                        self.lock.release()
                        break
                    
                self.lock.release()
        
        
    def handleMsg(self, msg):
        
        if msg[0] != '$':
            logging.debug('msg ignored: first char != $')
            return None, 0, 0
        
        #logging.debug('-->>>>>>>>>>>> GDB rsp packet: %s', msg)
        
        # query command
        if msg[1] == 'q':
            return self.handleQuery(msg[2:]), 1, 0
            
        elif msg[1] == 'H':
            return self.createRSPPacket(''), 1, 0
        
        elif msg[1] == '?':
            return self.lastSignal(), 1, 0
        
        elif msg[1] == 'g':
            return self.getRegister(), 1, 0
        
        elif msg[1] == 'p':
            return self.readRegister(msg[2:]), 1, 0
        
        elif msg[1] == 'P':
            return self.writeRegister(msg[2:]), 1, 0
        
        elif msg[1] == 'm':
            return self.getMemory(msg[2:]), 1, 0
        
        elif msg[1] == 'X':
            return self.writeMemory(msg[2:]), 1, 0
        
        elif msg[1] == 'v':
            return self.flashOp(msg[2:]), 1, 0
        
        # we don't send immediately the response for C and S commands
        elif msg[1] == 'C' or msg[1] == 'c':
            return self.resume()
        
        elif msg[1] == 'S' or msg[1] == 's':
            return self.step()
        
        elif msg[1] == 'Z' or msg[1] == 'z':
            return self.breakpoint(msg[1:]), 1, 0
        
        elif msg[1] == 'D':
            return self.detach(msg[1:]), 1, 1
        
        elif msg[1] == 'k':
            return self.kill(), 1, 1
        
        else:
            logging.error("Unknown RSP packet: %s", msg)
            return self.createRSPPacket(""), 1, 0
        
    def detach(self, data):
        resp = "OK"
        return self.createRSPPacket(resp)
    
    def kill(self):
        return self.createRSPPacket("")
        
    def breakpoint(self, data):
        # handle Z1/z1 commands
        addr = int(data.split(',')[1], 16)
        if data[1] == '1':
            if data[0] == 'Z':
                if self.target.setBreakpoint(addr) == False:
                    resp = "ENN"
                    return self.createRSPPacket(resp)
            else:
                self.target.removeBreakpoint(addr)
            resp = "OK"
            return self.createRSPPacket(resp)
        
        return None
            
    def resume(self):
        self.ack()
        self.abstract_socket.setBlocking(0)
        
        # Try to set break point at hardfault handler to avoid
        # halting target constantly
        if not self.break_at_hardfault:
            bpSet=False
        elif (self.target.availableBreakpoint() >= 1):
            bpSet=True
            hardfault_handler = self.target.readMemory(4*3)
            self.target.setBreakpoint(hardfault_handler)
        else:
            bpSet=False
            logging.info("No breakpoint available. Interfere target constantly.")

        self.target.resume()
        
        val = ''
        
        while True:
            sleep(0.01)
            if self.shutdown_event.isSet():
                return self.createRSPPacket(val), 0, 0
            
            try:
                data = self.abstract_socket.read()
                if (data[0] == '\x03'):
                    self.target.halt()
                    val = 'S05'
                    logging.debug("receive CTRL-C")
                    break
            except:
                pass
            
            try:
                if self.target.getState() == TARGET_HALTED:
                    logging.debug("state halted")
                    xpsr = self.target.readCoreRegister('xpsr')
                    # Get IPSR value from XPSR
                    if (xpsr & 0x1f) == 3:
                        val = "S" + FAULT[3]
                    else:
                        val = 'S05'
                    break
            except:
                logging.debug('Target is unavailable temporary.')

            if (not bpSet) and self.break_at_hardfault:
                # Only do this when no bp available as it slows resume operation
                self.target.halt()
                xpsr = self.target.readCoreRegister('xpsr')
                logging.debug("GDB resume xpsr: 0x%X", xpsr)
                # Get IPSR value from XPSR
                if (xpsr & 0x1f) == 3:
                    val = "S" + FAULT[3]
                    break
                self.target.resume()
        
        if bpSet and self.break_at_hardfault:
            self.target.removeBreakpoint(hardfault_handler)

        self.abstract_socket.setBlocking(1)
        return self.createRSPPacket(val), 0, 0
    
    def step(self):
        self.ack()
        self.target.step()
        return self.createRSPPacket("S05"), 0, 0
    
    def halt(self):
        self.ack()
        self.target.halt()
        return self.createRSPPacket("S05"), 0, 0
        
    def flashOp(self, data):
        ops = data.split(':')[0]
        logging.debug("flash op: %s", ops)
        
        if ops == 'FlashErase':
            return self.createRSPPacket("OK")
        
        elif ops == 'FlashWrite':
            write_addr = int(data.split(':')[1], 16)
            logging.debug("flash write addr: 0x%x", write_addr)
            # search for second ':' (beginning of data encoded in the message)
            second_colon = 0
            idx_begin = 0
            while second_colon != 2:
                if data[idx_begin] == ':':
                    second_colon += 1
                idx_begin += 1

            # determine the address to start flashing
            if self.flashOffset == None:
                # flash offset must be a multiple of the page size
                self.flashOffset = write_addr - ( write_addr % self.flash.page_size )

            # if there's gap between sections, fill it
            flash_watermark = len(self.flashData) + self.flashOffset
            pad_size = write_addr - flash_watermark
            if pad_size > 0:
                self.flashData += [0xFF] * pad_size
            
            # append the new data if it doesn't overlap existing data
            if write_addr >= flash_watermark:
                self.flashData += self.unescape(data[idx_begin:len(data) - 3])
            else:
                logging.error("Invalid FlashWrite address %d overlaps current data of size %d", write_addr, flash_watermark)
                
            return self.createRSPPacket("OK")
        
        # we need to flash everything
        elif 'FlashDone' in ops :
            bytes_to_be_written = len(self.flashData)
            flashPtr = self.flashOffset
            
            self.flash.init()

            # use mass erase if the address starts at 0
            mass_erase = flashPtr == 0
            if mass_erase:
                logging.debug("Erasing entire flash")
                self.flash.eraseAll()

            while len(self.flashData) > 0:
                size_to_write = min(self.flash.page_size, len(self.flashData))
                
                #Erase Page if flash has not been erased
                if not mass_erase:
                    logging.debug("Erasing page 0x%x", flashPtr)
                    self.flash.erasePage(flashPtr)

                #ProgramPage
                self.flash.programPage(flashPtr, self.flashData[:size_to_write])
                flashPtr += size_to_write

                self.flashData = self.flashData[size_to_write:]

                # print progress bar
                sys.stdout.write('\r')
                i = int((float(flashPtr - self.flashOffset)/float(bytes_to_be_written))*20.0)
                # the exact output you're looking for:
                sys.stdout.write("[%-20s] %d%%" % ('='*i, 5*i))
                sys.stdout.flush()
                
            sys.stdout.write("\n\r")
            
            self.flashData = []
            self.flashOffset = None

            # reset and stop on reset handler
            self.target.resetStopOnReset()
            
            return self.createRSPPacket("OK")
        
        elif 'Cont' in ops:
            if 'Cont?' in ops:
                return self.createRSPPacket("vCont;c;s;t")
                
        return None
    
    def unescape(self, data):
        data_idx = 0
    
        # unpack the data into binary array
        str_unpack = str(len(data)) + 'B'
        data = unpack(str_unpack, data)
        data = list(data)
    
        # check for escaped characters
        while data_idx < len(data):
            if data[data_idx] == 0x7d:
                data.pop(data_idx)
                data[data_idx] = data[data_idx] ^ 0x20
            data_idx += 1
            
        return data
            
        
    def getMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = split[1]
        length = int(length[:len(length)-3],16)
        
        val = ''
        
        mem = self.target.readBlockMemoryUnaligned8(addr, length)
        for x in mem:
            if x >= 0x10:
                val += hex(x)[2:4]
            else:
                val += '0' + hex(x)[2:3]
            
        return self.createRSPPacket(val)
    
    def writeMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = int(split[1].split(':')[0], 16)
        
        idx_begin = 0
        for i in range(len(data)):
            if data[i] == ':':
                idx_begin += 1
                break
            idx_begin += 1
        
        data = data[idx_begin:len(data) - 3]
        data = self.unescape(data)
        
        if length > 0:
            self.target.writeBlockMemoryUnaligned8(addr, data)
        
        return self.createRSPPacket("OK")
        
    def readRegister(self, data):
        num = int(data.split('#')[0], 16)
        reg = self.target.readCoreRegister(num)
        logging.debug("GDB: read reg %d: 0x%X", num, reg)
        val = self.intToHexGDB(reg)
        return self.createRSPPacket(val)
    
    def writeRegister(self, data):
        num = int(data.split('=')[0], 16)
        val = data.split('=')[1].split('#')[0]
        val = val[6:8] + val[4:6] + val[2:4] + val[0:2]
        logging.debug("GDB: write reg %d: 0x%X", num, int(val, 16))
        self.target.writeCoreRegister(num, int(val, 16))
        return self.createRSPPacket("OK")
    
    def intToHexGDB(self, val):
        val = hex(int(val))[2:]
        size = len(val)
        r = ''
        for i in range(8-size):
            r += '0'
        r += str(val)
        
        resp = ''
        for i in range(4):
            resp += r[8 - 2*i - 2: 8 - 2*i]
        
        return resp
            
    def getRegister(self):
        resp = ''
        # only core registers are printed
        for i in sorted(CORE_REGISTER.values())[4:20]:
            reg = self.target.readCoreRegister(i)
            resp += self.intToHexGDB(reg)
            logging.debug("GDB reg: %s = 0x%X", self.target.getRegisterName(i), reg)
        return self.createRSPPacket(resp)
        
    def lastSignal(self):
        fault = self.target.readCoreRegister('xpsr') & 0xff
        try:
            fault = FAULT[fault]
        except:
            # Values above 16 are for interrupts
            fault = "17"    # SIGSTOP
            pass
        logging.debug("GDB lastSignal: %s", fault)
        return self.createRSPPacket('S' + fault)
            
    def handleQuery(self, msg):
        query = msg.split(':')
        logging.debug('GDB received query: %s', query)
        
        if query is None:
            logging.error('GDB received query packet malformed')
            return None
        
        if query[0] == 'Supported':
            resp = "qXfer:memory-map:read+;qXfer:features:read+;PacketSize="
            resp += hex(self.packet_size)[2:]
            return self.createRSPPacket(resp)
            
        elif query[0] == 'Xfer':
            
            if query[1] == 'features' and query[2] == 'read' and \
               query[3] == 'target.xml':
                data = query[4].split(',')
                resp = self.handleQueryXML('read_feature', int(data[0], 16), int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)
            
            elif query[1] == 'memory-map' and query[2] == 'read':
                data = query[4].split(',')
                resp = self.handleQueryXML('memory_map', int(data[0], 16), int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)
                
            else:
                return None
            
        elif query[0] == 'C#b4':
            return self.createRSPPacket("")
        
        elif query[0].find('Attached') != -1:
            return self.createRSPPacket("1")
        
        elif query[0].find('TStatus') != -1:
            return self.createRSPPacket("")
        
        elif query[0].find('Tf') != -1:
            return self.createRSPPacket("")
        
        elif 'Offsets' in query[0]:
            resp = "Text=0;Data=0;Bss=0"
            return self.createRSPPacket(resp)
        
        elif 'Symbol' in query[0]:
            resp = "OK"
            return self.createRSPPacket(resp)

        elif query[0].startswith('Rcmd,'):
            cmd = self.hexDecode(query[0][5:].split('#')[0])
            logging.debug('Remote command: %s', cmd)

            safecmd = {
                'reset' : ['Reset target', 0x1],
                'halt'  : ['Halt target', 0x2],
                'resume': ['Resume target', 0x4],
                'help'  : ['Display this help', 0x80],
            }
            resultMask = 0x00
            if cmd == 'help':
                resp = ''
                for k,v in safecmd.items():
                    resp += '%s\t%s\n' % (k,v)
                resp = self.hexEncode(resp)
            else:
                cmdList = cmd.split(' ')
                #check whether all the cmds is valid cmd for monitor
                for cmd_sub in cmdList:
                    if not cmd_sub in safecmd:
                        #error cmd for monitor, just return directly
                        resp = ''
                        return self.createRSPPacket(resp)
                    else:
                        resultMask = resultMask | safecmd[cmd_sub][1]
                #if it's a single cmd, just launch it!
                if len(cmdList) == 1:
                    tmp = eval ('self.target.%s()' % cmd_sub)
                    logging.debug(tmp)
                    resp = "OK"
                else:
                    #10000001 for help reset, so output reset cmd help information
                    if resultMask == 0x81:
                        resp = 'Reset the target\n'
                        resp = self.hexEncode(resp)
                    #10000010 for help halt, so output halt cmd help information
                    elif resultMask == 0x82:
                        resp = 'Halt the target\n'
                        resp = self.hexEncode(resp)
                    #10000100 for help resume, so output resume cmd help information
                    elif resultMask == 0x84:
                        resp = 'Resume the target\n'
                        resp = self.hexEncode(resp)
                    #11 for reset halt cmd, so launch self.target.resetStopOnReset()
                    elif resultMask == 0x3:
                        resp = "OK"
                        self.target.resetStopOnReset()
                    #111 for reset halt resume cmd, so launch self.target.resetStopOnReset() and self.target.resume()
                    elif resultMask == 0x7:
                        resp = "OK"
                        self.target.resetStopOnReset()
                        self.target.resume()
                    else:
                        resp = ''
            return self.createRSPPacket(resp)

        else:
            return self.createRSPPacket("")
            
    def handleQueryXML(self, query, offset, size):
        logging.debug('GDB query %s: offset: %s, size: %s', query, offset, size)
        xml = ''
        if query == 'memory_map':
            xml = self.target.memoryMapXML
        elif query == 'read_feature':
            xml = self.target.targetXML

        size_xml = len(xml)
        
        prefix = 'm'
        
        if offset > size_xml:
            logging.error('GDB: offset target.xml > size!')
            return
        
        if size > (self.packet_size - 4):
            size = self.packet_size - 4
        
        nbBytesAvailable = size_xml - offset
        
        if size > nbBytesAvailable:
            prefix = 'l'
            size = nbBytesAvailable
        
        resp = prefix + xml[offset:offset + size]
        
        return resp
            
            
    def createRSPPacket(self, data):
        resp = '$' + data + '#'
        
        c = 0
        checksum = 0
        for c in data:
            checksum += ord(c)
        checksum = checksum % 256
        checksum = hex(checksum)

        if int(checksum[2:], 16) < 0x10:
            resp += '0'
        resp += checksum[2:]
        
        #logging.debug('--<<<<<<<<<<<< GDB rsp packet: %s', resp)
        return resp
    
    def ack(self):
        self.abstract_socket.write("+")

    def hexDecode(self, cmd):
        return ''.join([ chr(int(cmd[i:i+2], 16)) for i in range(0, len(cmd), 2)])

    def hexEncode(self, string):
        return ''.join(['%02x' % ord(i) for i in string])
コード例 #3
0
ファイル: gdbserver.py プロジェクト: henryeherman/pyOCD
class GDBServer(threading.Thread):
    """
    This class start a GDB server listening a gdb connection on a specific port.
    It implements the RSP (Remote Serial Protocol).
    """
    def __init__(self, board, port_urlWSS):
        threading.Thread.__init__(self)
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.abstract_socket = None
        self.wss_server = None
        self.port = 0
        if isinstance(port_urlWSS, str) == True:
            self.wss_server = port_urlWSS
        else:
            self.port = port_urlWSS
        self.packet_size = 2048
        self.flashData = list()
        self.flash_watermark = 0
        self.conn = None
        self.lock = threading.Lock()
        self.shutdown_event = threading.Event()
        self.detach_event = threading.Event()
        self.quit = False
        if self.wss_server == None:
            self.abstract_socket = GDBSocket(self.port, self.packet_size)
        else:
            self.abstract_socket = GDBWebSocket(self.wss_server)
        self.start()
    
    def restart(self):
        if self.isAlive():
            self.detach_event.set()
    
    def stop(self):
        if self.isAlive():
            self.shutdown_event.set()
            while self.isAlive():
                pass
            logging.info("GDB server thread killed")
        self.board.uninit()
        
    def setBoard(self, board, stop = True):
        self.lock.acquire()
        if stop:
            self.restart()
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.lock.release()
        return
        
    def run(self):
        while True:
            new_command = False
            data = ""
            logging.info('GDB server started')
            
            self.shutdown_event.clear()
            self.detach_event.clear()
                
            while not self.shutdown_event.isSet() and not self.detach_event.isSet():
                connected = self.abstract_socket.connect()
                if connected != None:
                    break
            
            if self.shutdown_event.isSet():
                return
            
            if self.detach_event.isSet():
                continue
            
            logging.info("One client connected!")
            
            while True:
                
                if self.shutdown_event.isSet():
                    return
            
                if self.detach_event.isSet():
                    continue
                
                # read command
                while True:
                    if (new_command == True):
                        new_command = False
                        break
                    try:
                        if self.shutdown_event.isSet() or self.detach_event.isSet():
                            break
                        self.abstract_socket.setBlocking(0)
                        data += self.abstract_socket.read()
                        if data.index("$") >= 0 and data.index("#") >= 0:
                            break
                    except (ValueError, socket.error):
                        pass
                
                if self.shutdown_event.isSet():
                    return
            
                if self.detach_event.isSet():
                    continue
                
                self.abstract_socket.setBlocking(1)
                    
                data = data[data.index("$"):]
                
                self.lock.acquire()
            
                if len(data) != 0:
                    # decode and prepare resp
                    [resp, ack, detach] = self.handleMsg(data)
            
                    if resp is not None:
                        # ack
                        if ack:
                            resp = "+" + resp
                        # send resp
                        self.abstract_socket.write(resp)
                        # wait a '+' from the client
                        try:
                            data = self.abstract_socket.read()
                            if data[0] != '+':
                                logging.debug('gdb client has not ack!')
                            else:
                                logging.debug('gdb client has ack!')
                            if data.index("$") >= 0 and data.index("#") >= 0:
                                new_command = True
                        except:
                            pass
                        
                    if detach:
                        self.abstract_socket.close()
                        self.lock.release()
                        break
                    
                self.lock.release()
        
        
    def handleMsg(self, msg):
        
        if msg[0] != '$':
            logging.debug('msg ignored: first char != $')
            return None, 0, 0
        
        #logging.debug('-->>>>>>>>>>>> GDB rsp packet: %s', msg)
        
        # query command
        if msg[1] == 'q':
            return self.handleQuery(msg[2:]), 1, 0
            
        elif msg[1] == 'H':
            return self.createRSPPacket(''), 1, 0
        
        elif msg[1] == '?':
            return self.lastSignal(), 1, 0
        
        elif msg[1] == 'g':
            return self.getRegister(), 1, 0
        
        elif msg[1] == 'p':
            return self.readRegister(msg[2:]), 1, 0
        
        elif msg[1] == 'P':
            return self.writeRegister(msg[2:]), 1, 0
        
        elif msg[1] == 'm':
            return self.getMemory(msg[2:]), 1, 0
        
        elif msg[1] == 'X':
            return self.writeMemory(msg[2:]), 1, 0
        
        elif msg[1] == 'v':
            return self.flashOp(msg[2:]), 1, 0
        
        # we don't send immediately the response for C and S commands
        elif msg[1] == 'C' or msg[1] == 'c':
            return self.resume()
        
        elif msg[1] == 'S' or msg[1] == 's':
            return self.step()
        
        elif msg[1] == 'Z' or msg[1] == 'z':
            return self.breakpoint(msg[1:]), 1, 0
        
        elif msg[1] == 'D':
            return self.detach(msg[1:]), 1, 1
        
        elif msg[1] == 'k':
            return self.kill(), 1, 1
        
        else:
            logging.error("Unknown RSP packet: %s", msg)
            return None
        
    def detach(self, data):
        resp = "OK"
        return self.createRSPPacket(resp)
    
    def kill(self):
        return self.createRSPPacket("")
        
    def breakpoint(self, data):
        # handle Z1/z1 commands
        addr = int(data.split(',')[1], 16)
        if data[1] == '1':
            if data[0] == 'Z':
                if self.target.setBreakpoint(addr) == False:
                    resp = "ENN"
                    return self.createRSPPacket(resp)
            else:
                self.target.removeBreakpoint(addr)
            resp = "OK"
            return self.createRSPPacket(resp)
        
        return None
            
    def resume(self):
        self.ack()
        self.target.resume()
        self.abstract_socket.setBlocking(0)
        
        # Try to set break point at hardfault handler to avoid
        # halting target constantly
        if (self.target.availableBreakpoint() >= 1):
            bpSet=True
            hardfault_handler = self.target.readMemory(4*3)
            self.target.setBreakpoint(hardfault_handler)
        else:
            bpSet=False
            logging.info("No breakpoint available. Interfere target constantly.")
        
        val = ''
        
        while True:
            sleep(0.01)
            
            try:
                data = self.abstract_socket.read()
                if (data[0] == '\x03'):
                    self.target.halt()
                    val = 'S05'
                    logging.debug("receive CTRL-C")
                    break
            except:
                pass
            
            if self.target.getState() == TARGET_HALTED:
                logging.debug("state halted")
                ipsr = self.target.readCoreRegister('xpsr')
                if (ipsr & 0x1f) == 3:
                    val = "S" + FAULT[3]
                else:
                    val = 'S05'
                break
            
            if not bpSet:
                # Only do this when no bp available as it slows resume operation
                self.target.halt()
                ipsr = self.target.readCoreRegister('xpsr')
                logging.debug("GDB resume xpsr: 0x%X", ipsr)
                if (ipsr & 0x1f) == 3:
                    val = "S" + FAULT[3]
                    break
                self.target.resume()
        
        if bpSet:
            self.target.removeBreakpoint(hardfault_handler)

        self.abstract_socket.setBlocking(1)
        return self.createRSPPacket(val), 0, 0
    
    def step(self):
        self.ack()
        self.target.step()
        return self.createRSPPacket("S05"), 0, 0
    
    def halt(self):
        self.ack()
        self.target.halt()
        return self.createRSPPacket("S05"), 0, 0
        
    def flashOp(self, data):
        ops = data.split(':')[0]
        #logging.debug("flash op: %s", ops)
        
        if ops == 'FlashErase':
            self.flash.init()
            self.flash.eraseAll()
            return self.createRSPPacket("OK")
        
        elif ops == 'FlashWrite':
            logging.debug("flash write addr: 0x%s", data.split(':')[1])
            # search for second ':' (beginning of data encoded in the message)
            second_colon = 0
            idx_begin = 0
            while second_colon != 2:
                if data[idx_begin] == ':':
                    second_colon += 1
                idx_begin += 1

            #if there's gap between sections, fill it with zeros
            count = int(data.split(':')[1], 16)
            if (count != 0 and self.flash_watermark != count):
                count -= self.flash_watermark
                while (count):
                    self.flashData += [0]
                    count -= 1

            data_to_unescape = data[idx_begin:len(data) - 3]

            unescaped_data = self.unescape(data_to_unescape)
            self.flashData += unescaped_data
            #flash_watermark contains the end of the flash data
            self.flash_watermark = len(self.flashData)

            return self.createRSPPacket("OK")
        
        # we need to flash everything
        elif 'FlashDone' in ops :
            flashPtr = 0
            bytes_to_be_written = len(self.flashData)

            """
            bin = open(os.path.join(parentdir, 'res', 'bad_bin.txt'), "w+")
            
            i = 0
            while (i < bytes_to_be_written):
                bin.write(str(self.flashData[i:i+16]) + "\n")
                i += 16
            """

            logging.info("flashing %d bytes", bytes_to_be_written)

            while len(self.flashData) > 0:
                size_to_write = min(self.flash.page_size, len(self.flashData))
                #if 0 is returned from programPage, security check failed
                if (self.flash.programPage(flashPtr, self.flashData[:size_to_write]) == 0):
                    logging.error("Protection bits error, flashing has stopped")
                    return None
                flashPtr += size_to_write

                self.flashData = self.flashData[size_to_write:]

                # print progress bar
                sys.stdout.write('\r')
                i = int((float(flashPtr)/float(bytes_to_be_written))*20.0)
                # the exact output you're looking for:
                sys.stdout.write("[%-20s] %d%%" % ('='*i, 5*i))
                sys.stdout.flush()
                
            sys.stdout.write("\n\r")
            
            self.flashData = []
            
            """
            bin.close()
            """
            
            # reset and stop on reset handler
            self.target.resetStopOnReset()
            
            return self.createRSPPacket("OK")
        
        elif 'Cont' in ops:
            if 'Cont?' in ops:
                return self.createRSPPacket("vCont;c;s;t")
                
        return None
    
    def unescape(self, data):
        data_idx = 0
    
        # unpack the data into binary array
        str_unpack = str(len(data)) + 'B'
        data = unpack(str_unpack, data)
        data = list(data)
    
        # check for escaped characters
        while data_idx < len(data):
            if data[data_idx] == 0x7d:
                data.pop(data_idx)
                data[data_idx] = data[data_idx] ^ 0x20
            data_idx += 1
            
        return data
            
        
    def getMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = split[1]
        length = int(length[:len(length)-3],16)
        
        val = ''
        
        mem = self.target.readBlockMemoryUnaligned8(addr, length)
        for x in mem:
            if x >= 0x10:
                val += hex(x)[2:4]
            else:
                val += '0' + hex(x)[2:3]
            
        return self.createRSPPacket(val)
    
    def writeMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = int(split[1].split(':')[0], 16)
        
        idx_begin = 0
        for i in range(len(data)):
            if data[i] == ':':
                idx_begin += 1
                break
            idx_begin += 1
        
        data = data[idx_begin:len(data) - 3]
        data = self.unescape(data)
        
        if length > 0:
            self.target.writeBlockMemoryUnaligned8(addr, data)
        
        return self.createRSPPacket("OK")
        
    def readRegister(self, data):
        num = int(data.split('#')[0], 16)
        reg = self.target.readCoreRegister(num)
        logging.debug("GDB: read reg %d: 0x%X", num, reg)
        val = self.intToHexGDB(reg)
        return self.createRSPPacket(val)
    
    def writeRegister(self, data):
        num = int(data.split('=')[0], 16)
        val = data.split('=')[1].split('#')[0]
        val = val[6:8] + val[4:6] + val[2:4] + val[0:2]
        logging.debug("GDB: write reg %d: 0x%X", num, int(val, 16))
        self.target.writeCoreRegister(num, int(val, 16))
        return self.createRSPPacket("OK")
    
    def intToHexGDB(self, val):
        val = hex(int(val))[2:]
        size = len(val)
        r = ''
        for i in range(8-size):
            r += '0'
        r += str(val)
        
        resp = ''
        for i in range(4):
            resp += r[8 - 2*i - 2: 8 - 2*i]
        
        return resp
            
    def getRegister(self):
        resp = ''
        # only core registers are printed
        for i in sorted(CORE_REGISTER.values())[4:20]:
            reg = self.target.readCoreRegister(i)
            resp += self.intToHexGDB(reg)
            logging.debug("GDB reg: %s = 0x%X", self.target.getRegisterName(i), reg)
        return self.createRSPPacket(resp)
        
    def lastSignal(self):
        fault = self.target.readCoreRegister('xpsr') & 0xff
        fault = FAULT[fault]
        logging.debug("GDB lastSignal: %s", fault)
        return self.createRSPPacket('S' + fault)
            
    def handleQuery(self, msg):
        query = msg.split(':')
        logging.debug('GDB received query: %s', query)
        
        if query is None:
            logging.error('GDB received query packet malformed')
            return None
        
        if query[0] == 'Supported':
            resp = "qXfer:memory-map:read+;qXfer:features:read+;PacketSize="
            resp += hex(self.packet_size)[2:]
            return self.createRSPPacket(resp)
            
        elif query[0] == 'Xfer':
            
            if query[1] == 'features' and query[2] == 'read' and \
               query[3] == 'target.xml':
                data = query[4].split(',')
                resp = self.handleQueryXML('read_feature', int(data[0], 16), int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)
            
            elif query[1] == 'memory-map' and query[2] == 'read':
                data = query[4].split(',')
                resp = self.handleQueryXML('memory_map', int(data[0], 16), int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)
                
            else:
                return None
            
        elif query[0] == 'C#b4':
            return self.createRSPPacket("")
        
        elif query[0].find('Attached') != -1:
            return self.createRSPPacket("1")
        
        elif query[0].find('TStatus') != -1:
            return self.createRSPPacket("")
        
        elif query[0].find('Tf') != -1:
            return self.createRSPPacket("")
        
        elif 'Offsets' in query[0]:
            resp = "Text=0;Data=0;Bss=0"
            return self.createRSPPacket(resp)
        
        elif 'Symbol' in query[0]:
            resp = "OK"
            return self.createRSPPacket(resp)
        
        else:
            return None
            
    def handleQueryXML(self, query, offset, size):
        logging.debug('GDB query %s: offset: %s, size: %s', query, offset, size)
        xml = ''
        if query == 'memory_map':
            xml = self.target.memoryMapXML
        elif query == 'read_feature':
            xml = self.target.targetXML

        size_xml = len(xml)
        
        prefix = 'm'
        
        if offset > size_xml:
            logging.error('GDB: offset target.xml > size!')
            return
        
        if size > (self.packet_size - 4):
            size = self.packet_size - 4
        
        nbBytesAvailable = size_xml - offset
        
        if size > nbBytesAvailable:
            prefix = 'l'
            size = nbBytesAvailable
        
        resp = prefix + xml[offset:offset + size]
        
        return resp
            
            
    def createRSPPacket(self, data):
        resp = '$' + data + '#'
        
        c = 0
        checksum = 0
        for c in data:
            checksum += ord(c)
        checksum = checksum % 256
        checksum = hex(checksum)

        if int(checksum[2:], 16) < 0x10:
            resp += '0'
        resp += checksum[2:]
        
        #logging.debug('--<<<<<<<<<<<< GDB rsp packet: %s', resp)
        return resp
    
    def ack(self):
        self.abstract_socket.write("+")
コード例 #4
0
ファイル: gdbserver.py プロジェクト: geky/pyOCD
class GDBServer(threading.Thread):
    """
    This class start a GDB server listening a gdb connection on a specific port.
    It implements the RSP (Remote Serial Protocol).
    """
    def __init__(self, board, port_urlWSS, options = {}):
        threading.Thread.__init__(self)
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.abstract_socket = None
        self.wss_server = None
        self.port = 0
        if isinstance(port_urlWSS, str) == True:
            self.wss_server = port_urlWSS
        else:
            self.port = port_urlWSS
        self.break_at_hardfault = bool(options.get('break_at_hardfault', True))
        self.board.target.setVectorCatchFault(self.break_at_hardfault)
        self.break_on_reset = options.get('break_on_reset', False)
        self.board.target.setVectorCatchReset(self.break_on_reset)
        self.step_into_interrupt = options.get('step_into_interrupt', False)
        self.persist = options.get('persist', False)
        self.soft_bkpt_as_hard = options.get('soft_bkpt_as_hard', False)
        self.chip_erase = options.get('chip_erase', None)
        self.hide_programming_progress = options.get('hide_programming_progress', False)
        self.fast_program = options.get('fast_program', False)
        self.packet_size = 2048
        self.send_acks = True
        self.clear_send_acks = False
        self.gdb_features = []
        self.flashBuilder = None
        self.conn = None
        self.lock = threading.Lock()
        self.shutdown_event = threading.Event()
        self.detach_event = threading.Event()
        self.quit = False
        if self.wss_server == None:
            self.abstract_socket = GDBSocket(self.port, self.packet_size)
        else:
            self.abstract_socket = GDBWebSocket(self.wss_server)
        self.setDaemon(True)
        self.start()
    
    def restart(self):
        if self.isAlive():
            self.detach_event.set()
    
    def stop(self):
        if self.isAlive():
            self.shutdown_event.set()
            while self.isAlive():
                pass
            logging.info("GDB server thread killed")
        self.board.uninit()
        
    def setBoard(self, board, stop = True):
        self.lock.acquire()
        if stop:
            self.restart()
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.lock.release()
        return
        
    def run(self):
        self.timeOfLastPacket = time()
        while True:
            new_command = False
            data = ""
            logging.info('GDB server started at port:%d',self.port)
            
            self.shutdown_event.clear()
            self.detach_event.clear()
                
            while not self.shutdown_event.isSet() and not self.detach_event.isSet():
                connected = self.abstract_socket.connect()
                if connected != None:
                    break
            
            if self.shutdown_event.isSet():
                return
            
            if self.detach_event.isSet():
                continue
            
            logging.info("One client connected!")
            
            while True:
                
                if self.shutdown_event.isSet():
                    return
            
                if self.detach_event.isSet():
                    continue
                
                # read command
                while True:
                    if (new_command == True):
                        new_command = False
                        break

                    # Reduce CPU usage by sleep()ing once we know that the
                    # debugger doesn't have a queue of commands that we should
                    # execute as quickly as possible.
                    if time() - self.timeOfLastPacket > 0.5:
                        sleep(0.1)
                    try:
                        if self.shutdown_event.isSet() or self.detach_event.isSet():
                            break
                        self.abstract_socket.setBlocking(0)
                        data += self.abstract_socket.read()
                        if data.index("$") >= 0 and data.index("#") >= 0:
                            break
                    except (ValueError, socket.error):
                        pass
                
                if self.shutdown_event.isSet():
                    return
            
                if self.detach_event.isSet():
                    continue
                
                self.abstract_socket.setBlocking(1)
                    
                data = data[data.index("$"):]
                
                self.lock.acquire()
            
                if len(data) != 0:
                    # decode and prepare resp
                    [resp, ack, detach] = self.handleMsg(data)

                    # Clear out data
                    data = ""
            
                    if resp is not None:
                        # ack
                        if ack and self.send_acks:
                            resp = "+" + resp
                        # send resp
                        self.abstract_socket.write(resp)
                        if self.send_acks:
                            # wait a '+' from the client
                            try:
                                data = self.abstract_socket.read()
                                if LOG_ACK:
                                    if data[0] != '+':
                                        logging.debug('gdb client has not ack!')
                                    else:
                                        logging.debug('gdb client has ack!')
                                if self.clear_send_acks:
                                    self.send_acks = False
                                if data.index("$") >= 0 and data.index("#") >= 0:
                                    new_command = True
                            except:
                                pass

                    if detach:
                        self.abstract_socket.close()
                        self.lock.release()
                        if self.persist:
                            break
                        else:
                            return

                    self.timeOfLastPacket = time()

                self.lock.release()
        
        
    def handleMsg(self, msg):
        
        if msg[0] != '$':
            logging.debug('msg ignored: first char != $')
            return None, 0, 0
        
        #logging.debug('-->>>>>>>>>>>> GDB rsp packet: %s', msg)
        
        # query command
        if msg[1] == '?':
            return self.createRSPPacket(self.target.getTResponse()), 1, 0

        # we don't send immediately the response for C and S commands
        elif msg[1] == 'C' or msg[1] == 'c':
            return self.resume()

        elif msg[1] == 'D':
            return self.detach(msg[1:]), 1, 1

        elif msg[1] == 'g':
            return self.getRegisters(), 1, 0

        elif msg[1] == 'G':
            return self.setRegisters(msg[2:]), 1, 0

        elif msg[1] == 'H':
            return self.createRSPPacket(''), 1, 0

        elif msg[1] == 'k':
            return self.kill(), 1, 1

        elif msg[1] == 'm':
            return self.getMemory(msg[2:]), 1, 0

        elif msg[1] == 'M': # write memory with hex data
            return self.writeMemoryHex(msg[2:]), 1, 0

        elif msg[1] == 'p':
            return self.readRegister(msg[2:]), 1, 0

        elif msg[1] == 'P':
            return self.writeRegister(msg[2:]), 1, 0

        elif msg[1] == 'q':
            return self.handleQuery(msg[2:]), 1, 0

        elif msg[1] == 'Q':
            return self.handleGeneralSet(msg[2:]), 1, 0

        elif msg[1] == 'S' or msg[1] == 's':
            return self.step()

        elif msg[1] == 'v':
            return self.flashOp(msg[2:]), 1, 0

        elif msg[1] == 'X': # write memory with binary data
            return self.writeMemory(msg[2:]), 1, 0

        elif msg[1] == 'Z' or msg[1] == 'z':
            return self.breakpoint(msg[1:]), 1, 0

        else:
            logging.error("Unknown RSP packet: %s", msg)
            return self.createRSPPacket(""), 1, 0
        
    def detach(self, data):
        logging.info("Client detached")
        resp = "OK"
        return self.createRSPPacket(resp)
    
    def kill(self):
        logging.debug("GDB kill")
        # Keep target halted and leave vector catches if in persistent mode.
        if not self.persist:
            self.board.target.setVectorCatchFault(False)
            self.board.target.setVectorCatchReset(False)
            self.board.target.resume()
        return self.createRSPPacket("")
        
    def breakpoint(self, data):
        # handle breakpoint/watchpoint commands
        split = data.split('#')[0].split(',')
        addr = int(split[1], 16)
        logging.debug("GDB breakpoint %d @ %x" % (int(data[1]), addr))

        if data[1] == '0' and not self.soft_bkpt_as_hard:   
            # Empty response indicating no support for software breakpoints
            return self.createRSPPacket("")

        # handle hardware breakpoint Z1/z1
        # and software breakpoint Z0/z0
        if data[1] == '1' or (self.soft_bkpt_as_hard and data[1] == '0'):
            if data[0] == 'Z':
                if self.target.setBreakpoint(addr) == False:
                    return self.createRSPPacket('E01') #EPERM
            else:
                self.target.removeBreakpoint(addr)
            return self.createRSPPacket("OK")

        # handle hardware watchpoint Z2/z2/Z3/z3/Z4/z4
        if data[1] == '2':
            # Write-only watch
            watchpoint_type = WATCHPOINT_WRITE
        elif data[1] == '3':
            # Read-only watch
            watchpoint_type = WATCHPOINT_READ
        elif data[1] == '4':
            # Read-Write watch
            watchpoint_type = WATCHPOINT_READ_WRITE
        else:
            return self.createRSPPacket('E01') #EPERM
        size = int(split[2], 16)
        if data[0] == 'Z':
            if self.target.setWatchpoint(addr, size, watchpoint_type) == False:
                return self.createRSPPacket('E01') #EPERM
        else:
            self.target.removeWatchpoint(addr, size, watchpoint_type)
        return self.createRSPPacket("OK")

    def resume(self):
        self.ack()
        self.abstract_socket.setBlocking(0)

        self.target.resume()
        logging.debug("target resumed")

        val = ''

        self.timeOfLastPacket = time()
        while True:
            if self.shutdown_event.isSet():
                return self.createRSPPacket(val), 0, 0

            # Introduce a delay between non-blocking socket reads once we know
            # that the CPU isn't going to halt quickly.
            if time() - self.timeOfLastPacket > 0.5:
                sleep(0.1)
            try:
                data = self.abstract_socket.read()
                if (data[0] == '\x03'):
                    self.target.halt()
                    val = self.target.getTResponse(True)
                    logging.debug("receive CTRL-C")
                    break
            except:
                pass

            try:
                if self.target.getState() == TARGET_HALTED:
                    logging.debug("state halted")
                    val = self.target.getTResponse()
                    break
            except:
                logging.debug('Target is unavailable temporary.')

        self.abstract_socket.setBlocking(1)
        return self.createRSPPacket(val), 0, 0

    def step(self):
        self.ack()
        logging.debug("GDB step")
        self.target.step(not self.step_into_interrupt)
        return self.createRSPPacket(self.target.getTResponse()), 0, 0

    def halt(self):
        self.ack()
        self.target.halt()
        return self.createRSPPacket(self.target.getTResponse()), 0, 0

    def flashOp(self, data):
        ops = data.split(':')[0]
        logging.debug("flash op: %s", ops)
        
        if ops == 'FlashErase':
            return self.createRSPPacket("OK")
        
        elif ops == 'FlashWrite':
            write_addr = int(data.split(':')[1], 16)
            logging.debug("flash write addr: 0x%x", write_addr)
            # search for second ':' (beginning of data encoded in the message)
            second_colon = 0
            idx_begin = 0
            while second_colon != 2:
                if data[idx_begin] == ':':
                    second_colon += 1
                idx_begin += 1

            # Get flash builder if there isn't one already
            if self.flashBuilder == None:
                self.flashBuilder = self.flash.getFlashBuilder()

            # Add data to flash builder
            self.flashBuilder.addData(write_addr, self.unescape(data[idx_begin:len(data) - 3]))
            
                
            return self.createRSPPacket("OK")
        
        # we need to flash everything
        elif 'FlashDone' in ops :

            def print_progress(progress):
                # Reset state on 0.0
                if progress == 0.0:
                    print_progress.done = False
                
                # print progress bar
                if not print_progress.done:
                    sys.stdout.write('\r')
                    i = int(progress*20.0)
                    sys.stdout.write("[%-20s] %3d%%" % ('='*i, round(progress * 100)))
                    sys.stdout.flush()

                # Finish on 1.0
                if progress >= 1.0:
                    if not print_progress.done:
                        print_progress.done = True
                        sys.stdout.write("\r\n")

            if self.hide_programming_progress:
                progress_cb = None
            else:
                 progress_cb = print_progress

            self.flashBuilder.program(chip_erase = self.chip_erase, progress_cb=progress_cb, fast_verify=self.fast_program)

            # Set flash builder to None so that on the next flash command a new
            # object is used.
            self.flashBuilder = None

            return self.createRSPPacket("OK")
        
        elif 'Cont' in ops:
            if 'Cont?' in ops:
                return self.createRSPPacket("vCont;c;s;t")
                
        return None
    
    def unescape(self, data):
        data_idx = 0
    
        # unpack the data into binary array
        str_unpack = str(len(data)) + 'B'
        data = unpack(str_unpack, data)
        data = list(data)
    
        # check for escaped characters
        while data_idx < len(data):
            if data[data_idx] == 0x7d:
                data.pop(data_idx)
                data[data_idx] = data[data_idx] ^ 0x20
            data_idx += 1
            
        return data
            
        
    def getMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = split[1].split('#')[0]
        length = int(length,16)

        if LOG_MEM:
            logging.debug("GDB getMem: addr=%x len=%x", addr, length)

        try:
            val = ''
            mem = self.target.readBlockMemoryUnaligned8(addr, length)
            # Flush so an exception is thrown now if invalid memory was accesses
            self.target.flush()
            for x in mem:
                if x >= 0x10:
                    val += hex(x)[2:4]
                else:
                    val += '0' + hex(x)[2:3]
        except TransferError:
            logging.debug("getMemory failed at 0x%x" % addr)
            val = 'E01' #EPERM
        return self.createRSPPacket(val)

    def writeMemoryHex(self, data):
        split = data.split(',')
        addr = int(split[0], 16)

        split = split[1].split(':')
        length = int(split[0], 16)

        split = split[1].split('#')
        data = hexStringToIntList(split[0])

        if LOG_MEM:
            logging.debug("GDB writeMemHex: addr=%x len=%x", addr, length)

        try:
            if length > 0:
                self.target.writeBlockMemoryUnaligned8(addr, data)
                # Flush so an exception is thrown now if invalid memory was accessed
                self.target.flush()
            resp = "OK"
        except TransferError:
            logging.debug("writeMemory failed at 0x%x" % addr)
            resp = 'E01' #EPERM

        return self.createRSPPacket(resp)

    def writeMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = int(split[1].split(':')[0], 16)

        if LOG_MEM:
            logging.debug("GDB writeMem: addr=%x len=%x", addr, length)

        idx_begin = 0
        for i in range(len(data)):
            if data[i] == ':':
                idx_begin += 1
                break
            idx_begin += 1
        
        data = data[idx_begin:len(data) - 3]
        data = self.unescape(data)
        
        try:
            if length > 0:
                self.target.writeBlockMemoryUnaligned8(addr, data)
                # Flush so an exception is thrown now if invalid memory was accessed
                self.target.flush()
            resp = "OK"
        except TransferError:
            logging.debug("writeMemory failed at 0x%x" % addr)
            resp = 'E01' #EPERM
        
        return self.createRSPPacket(resp)

    def readRegister(self, which):
        return self.createRSPPacket(self.target.gdbGetRegister(which))

    def writeRegister(self, data):
        reg = int(data.split('=')[0], 16)
        val = data.split('=')[1].split('#')[0]
        self.target.setRegister(reg, val)
        return self.createRSPPacket("OK")

    def getRegisters(self):
        return self.createRSPPacket(self.target.getRegisterContext())

    def setRegisters(self, data):
        self.target.setRegisterContext(data)
        return self.createRSPPacket("OK")

    def handleQuery(self, msg):
        query = msg.split(':')
        logging.debug('GDB received query: %s', query)

        if query is None:
            logging.error('GDB received query packet malformed')
            return None
        
        if query[0] == 'Supported':
            # Save features sent by gdb.
            self.gdb_features = query[1].split(';')

            # Build our list of features.
            features = ['qXfer:features:read+', 'QStartNoAckMode+']
            features.append('PacketSize=' + hex(self.packet_size)[2:])
            if hasattr(self.target, 'memoryMapXML'):
                features.append('qXfer:memory-map:read+')
            resp = ';'.join(features)
            return self.createRSPPacket(resp)
            
        elif query[0] == 'Xfer':
            
            if query[1] == 'features' and query[2] == 'read' and \
               query[3] == 'target.xml':
                data = query[4].split(',')
                resp = self.handleQueryXML('read_feature', int(data[0], 16), int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)
            
            elif query[1] == 'memory-map' and query[2] == 'read':
                data = query[4].split(',')
                resp = self.handleQueryXML('memory_map', int(data[0], 16), int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)
                
            else:
                return None
            
        elif query[0] == 'C#b4':
            return self.createRSPPacket("")
        
        elif query[0].find('Attached') != -1:
            return self.createRSPPacket("1")
        
        elif query[0].find('TStatus') != -1:
            return self.createRSPPacket("")
        
        elif query[0].find('Tf') != -1:
            return self.createRSPPacket("")
        
        elif 'Offsets' in query[0]:
            resp = "Text=0;Data=0;Bss=0"
            return self.createRSPPacket(resp)
        
        elif 'Symbol' in query[0]:
            resp = "OK"
            return self.createRSPPacket(resp)

        elif query[0].startswith('Rcmd,'):
            cmd = hexDecode(query[0][5:].split('#')[0])
            logging.debug('Remote command: %s', cmd)

            safecmd = {
                'reset' : ['Reset target', 0x1],
                'halt'  : ['Halt target', 0x2],
                'resume': ['Resume target', 0x4],
                'help'  : ['Display this help', 0x80],
            }
            resultMask = 0x00
            if cmd == 'help':
                resp = ''
                for k,v in safecmd.items():
                    resp += '%s\t%s\n' % (k,v[0])
                resp = hexEncode(resp)
            else:
                cmdList = cmd.split(' ')
                #check whether all the cmds is valid cmd for monitor
                for cmd_sub in cmdList:
                    if not cmd_sub in safecmd:
                        #error cmd for monitor
                        logging.warning("Invalid mon command '%s'", cmd)
                        resp = 'Invalid Command: "%s"\n' % cmd
                        resp = hexEncode(resp)
                        return self.createRSPPacket(resp)
                    else:
                        resultMask = resultMask | safecmd[cmd_sub][1]
                #if it's a single cmd, just launch it!
                if len(cmdList) == 1:
                    tmp = eval ('self.target.%s()' % cmd_sub)
                    logging.debug(tmp)
                    resp = "OK"
                else:
                    #10000001 for help reset, so output reset cmd help information
                    if resultMask == 0x81:
                        resp = 'Reset the target\n'
                        resp = hexEncode(resp)
                    #10000010 for help halt, so output halt cmd help information
                    elif resultMask == 0x82:
                        resp = 'Halt the target\n'
                        resp = hexEncode(resp)
                    #10000100 for help resume, so output resume cmd help information
                    elif resultMask == 0x84:
                        resp = 'Resume the target\n'
                        resp = hexEncode(resp)
                    #11 for reset halt cmd, so launch self.target.resetStopOnReset()
                    elif resultMask == 0x3:
                        resp = "OK"
                        self.target.resetStopOnReset()
                    #111 for reset halt resume cmd, so launch self.target.resetStopOnReset() and self.target.resume()
                    elif resultMask == 0x7:
                        resp = "OK"
                        self.target.resetStopOnReset()
                        self.target.resume()
                    else:
                        logging.warning("Invalid mon command '%s'", cmd)
                        resp = 'Invalid Command: "%s"\n' % cmd
                        resp = hexEncode(resp)

                if self.target.getState() != TARGET_HALTED:
                    logging.error("Remote command left target running!")
                    logging.error("Forcing target to halt")
                    self.target.halt()

            return self.createRSPPacket(resp)

        else:
            return self.createRSPPacket("")

    def handleGeneralSet(self, msg):
        logging.debug("GDB general set: %s", msg)
        feature = msg.split('#')[0]

        if feature == 'StartNoAckMode':
            # Disable acks after the reply and ack.
            self.clear_send_acks = True
            return self.createRSPPacket("OK")
        else:
            return self.createRSPPacket("")

    def handleQueryXML(self, query, offset, size):
        logging.debug('GDB query %s: offset: %s, size: %s', query, offset, size)
        xml = ''
        if query == 'memory_map':
            xml = self.target.memoryMapXML
        elif query == 'read_feature':
            xml = self.target.getTargetXML()

        size_xml = len(xml)
        
        prefix = 'm'
        
        if offset > size_xml:
            logging.error('GDB: offset target.xml > size!')
            return
        
        if size > (self.packet_size - 4):
            size = self.packet_size - 4
        
        nbBytesAvailable = size_xml - offset
        
        if size > nbBytesAvailable:
            prefix = 'l'
            size = nbBytesAvailable
        
        resp = prefix + xml[offset:offset + size]
        
        return resp
            
            
    def createRSPPacket(self, data):
        resp = '$' + data + '#'
        
        c = 0
        checksum = 0
        for c in data:
            checksum += ord(c)
        checksum = checksum % 256
        checksum = hex(checksum)

        if int(checksum[2:], 16) < 0x10:
            resp += '0'
        resp += checksum[2:]
        
        #logging.debug('--<<<<<<<<<<<< GDB rsp packet: %s', resp)
        return resp
    
    def ack(self):
        if self.send_acks:
            self.abstract_socket.write("+")
コード例 #5
0
class GDBServer(threading.Thread):
    """
    This class start a GDB server listening a gdb connection on a specific port.
    It implements the RSP (Remote Serial Protocol).
    """
    def __init__(self, board, port_urlWSS, options = {}):
        threading.Thread.__init__(self)
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.abstract_socket = None
        self.wss_server = None
        self.port = 0
        if isinstance(port_urlWSS, str) == True:
            self.wss_server = port_urlWSS
        else:
            self.port = port_urlWSS
        self.break_at_hardfault = bool(options.get('break_at_hardfault', True))
        self.board.target.setVectorCatchFault(self.break_at_hardfault)
        self.break_on_reset = options.get('break_on_reset', False)
        self.board.target.setVectorCatchReset(self.break_on_reset)
        self.step_into_interrupt = options.get('step_into_interrupt', False)
        self.persist = options.get('persist', False)
        self.packet_size = 2048
        self.flashData = list()
        self.flashOffset = None
        self.conn = None
        self.lock = threading.Lock()
        self.shutdown_event = threading.Event()
        self.detach_event = threading.Event()
        self.quit = False
        if self.wss_server == None:
            self.abstract_socket = GDBSocket(self.port, self.packet_size)
        else:
            self.abstract_socket = GDBWebSocket(self.wss_server)
        self.setDaemon(True)
        self.start()
    
    def restart(self):
        if self.isAlive():
            self.detach_event.set()
    
    def stop(self):
        if self.isAlive():
            self.shutdown_event.set()
            while self.isAlive():
                pass
            logging.info("GDB server thread killed")
        self.board.uninit()
        
    def setBoard(self, board, stop = True):
        self.lock.acquire()
        if stop:
            self.restart()
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.lock.release()
        return
        
    def run(self):
        self.timeOfLastPacket = time()
        while True:
            new_command = False
            data = ""
            logging.info('GDB server started at port:%d',self.port)
            
            self.shutdown_event.clear()
            self.detach_event.clear()
                
            while not self.shutdown_event.isSet() and not self.detach_event.isSet():
                connected = self.abstract_socket.connect()
                if connected != None:
                    break
            
            if self.shutdown_event.isSet():
                return
            
            if self.detach_event.isSet():
                continue
            
            logging.info("One client connected!")
            
            while True:
                
                if self.shutdown_event.isSet():
                    return
            
                if self.detach_event.isSet():
                    continue
                
                # read command
                while True:
                    if (new_command == True):
                        new_command = False
                        break

                    # Reduce CPU usage by sleep()ing once we know that the
                    # debugger doesn't have a queue of commands that we should
                    # execute as quickly as possible.
                    if time() - self.timeOfLastPacket > 0.5:
                        sleep(0.1)
                    try:
                        if self.shutdown_event.isSet() or self.detach_event.isSet():
                            break
                        self.abstract_socket.setBlocking(0)
                        data += self.abstract_socket.read().decode()
                        if data.index("$") >= 0 and data.index("#") >= 0:
                            break
                    except (ValueError, socket.error):
                        pass
                
                if self.shutdown_event.isSet():
                    return
            
                if self.detach_event.isSet():
                    continue
                
                self.abstract_socket.setBlocking(1)
                    
                data = data[data.index("$"):]
                
                self.lock.acquire()
            
                if len(data) != 0:
                    # decode and prepare resp
                    [resp, ack, detach] = self.handleMsg(data)
            
                    if resp is not None:
                        # ack
                        if ack:
                            resp = "+" + resp
                        # send resp
                        self.abstract_socket.write(resp.encode())
                        # wait a '+' from the client
                        try:
                            data = self.abstract_socket.read().decode()
                            if data[0] != '+':
                                logging.debug('gdb client has not ack!')
                            else:
                                logging.debug('gdb client has ack!')
                            if data.index("$") >= 0 and data.index("#") >= 0:
                                new_command = True
                        except:
                            pass
                        
                    if detach:
                        self.abstract_socket.close()
                        self.lock.release()
                        if self.persist:
                            break
                        else:
                            return

                    self.timeOfLastPacket = time()

                self.lock.release()
        
        
    def handleMsg(self, msg):
        
        if msg[0] != '$':
            logging.debug('msg ignored: first char != $')
            return None, 0, 0
        
        #logging.debug('-->>>>>>>>>>>> GDB rsp packet: %s', msg)
        
        # query command
        if msg[1] == 'q':
            return self.handleQuery(msg[2:]), 1, 0
            
        elif msg[1] == 'H':
            return self.createRSPPacket(''), 1, 0
        
        elif msg[1] == '?':
            return self.createRSPPacket(self.target.getTResponse()), 1, 0

        elif msg[1] == 'g':
            return self.getRegisters(), 1, 0

        elif msg[1] == 'G':
            return self.setRegisters(msg[2:]), 1, 0

        elif msg[1] == 'P':
            return self.writeRegister(msg[2:]), 1, 0

        elif msg[1] == 'm':
            return self.getMemory(msg[2:]), 1, 0
        
        elif msg[1] == 'X':
            return self.writeMemory(msg[2:]), 1, 0
        
        elif msg[1] == 'v':
            return self.flashOp(msg[2:]), 1, 0
        
        # we don't send immediately the response for C and S commands
        elif msg[1] == 'C' or msg[1] == 'c':
            return self.resume()
        
        elif msg[1] == 'S' or msg[1] == 's':
            return self.step()
        
        elif msg[1] == 'Z' or msg[1] == 'z':
            return self.breakpoint(msg[1:]), 1, 0
        
        elif msg[1] == 'D':
            return self.detach(msg[1:]), 1, 1
        
        elif msg[1] == 'k':
            return self.kill(), 1, 1
        
        else:
            logging.error("Unknown RSP packet: %s", msg)
            return self.createRSPPacket(""), 1, 0
        
    def detach(self, data):
        resp = "OK"
        return self.createRSPPacket(resp)
    
    def kill(self):
        # Keep target halted and leave vector catches if in persistent mode.
        if not self.persist:
            self.board.target.setVectorCatchFault(False)
            self.board.target.setVectorCatchReset(False)
            self.board.target.resume()
        return self.createRSPPacket("")
        
    def breakpoint(self, data):
        # handle breakpoint/watchpoint commands
        split = data.split('#')[0].split(',')
        addr = int(split[1], 16)

        # handle hardware breakpoint Z1/z1
        # and software breakpoint Z0/z0
        if data[1] == '1' or data[1] == '0':
            #TODO - add support for real software breakpoints
            if data[0] == 'Z':
                if self.target.setBreakpoint(addr) == False:
                    return self.createRSPPacket('E01') #EPERM
            else:
                self.target.removeBreakpoint(addr)
            return self.createRSPPacket("OK")

        # handle hardware watchpoint Z2/z2/Z3/z3/Z4/z4
        if data[1] == '2':
            # Write-only watch
            watchpoint_type = WATCHPOINT_WRITE
        elif data[1] == '3':
            # Read-only watch
            watchpoint_type = WATCHPOINT_READ
        elif data[1] == '4':
            # Read-Write watch
            watchpoint_type = WATCHPOINT_READ_WRITE
        else:
            return self.createRSPPacket('E01') #EPERM
        size = int(split[2], 16)
        if data[0] == 'Z':
            if self.target.setWatchpoint(addr, size, watchpoint_type) == False:
                return self.createRSPPacket('E01') #EPERM
        else:
            self.target.removeWatchpoint(addr, size, watchpoint_type)
        return self.createRSPPacket("OK")

    def resume(self):
        self.ack()
        self.abstract_socket.setBlocking(0)

        self.target.resume()
        
        val = ''

        self.timeOfLastPacket = time()
        while True:
            if self.shutdown_event.isSet():
                return self.createRSPPacket(val), 0, 0

            # Introduce a delay between non-blocking socket reads once we know
            # that the CPU isn't going to halt quickly.
            if time() - self.timeOfLastPacket > 0.5:
                sleep(0.1)
            try:
                data = self.abstract_socket.read().decode()
                if (data[0] == '\x03'):
                    self.target.halt()
                    val = self.target.getTResponse(True)
                    logging.debug("receive CTRL-C")
                    break
            except:
                pass

            try:
                if self.target.getState() == TARGET_HALTED:
                    logging.debug("state halted")
                    val = self.target.getTResponse()
                    break
            except:
                logging.debug('Target is unavailable temporary.')

        self.abstract_socket.setBlocking(1)
        return self.createRSPPacket(val), 0, 0

    def step(self):
        self.ack()
        self.target.step(not self.step_into_interrupt)
        return self.createRSPPacket(self.target.getTResponse()), 0, 0

    def halt(self):
        self.ack()
        self.target.halt()
        return self.createRSPPacket(self.target.getTResponse()), 0, 0

    def flashOp(self, data):
        ops = data.split(':')[0]
        logging.debug("flash op: %s", ops)
        
        if ops == 'FlashErase':
            return self.createRSPPacket("OK")
        
        elif ops == 'FlashWrite':
            write_addr = int(data.split(':')[1], 16)
            logging.debug("flash write addr: 0x%x", write_addr)
            # search for second ':' (beginning of data encoded in the message)
            second_colon = 0
            idx_begin = 0
            while second_colon != 2:
                if data[idx_begin] == ':':
                    second_colon += 1
                idx_begin += 1

            # determine the address to start flashing
            if self.flashOffset == None:
                # flash offset must be a multiple of the page size
                self.flashOffset = write_addr - ( write_addr % self.flash.page_size )

            # if there's gap between sections, fill it
            flash_watermark = len(self.flashData) + self.flashOffset
            pad_size = write_addr - flash_watermark
            if pad_size > 0:
                self.flashData += [0xFF] * pad_size
            
            # append the new data if it doesn't overlap existing data
            if write_addr >= flash_watermark:
                self.flashData += self.unescape(data[idx_begin:len(data) - 3])
            else:
                logging.error("Invalid FlashWrite address %d overlaps current data of size %d", write_addr, flash_watermark)
                
            return self.createRSPPacket("OK")
        
        # we need to flash everything
        elif 'FlashDone' in ops :
            bytes_to_be_written = len(self.flashData)
            flashPtr = self.flashOffset
            
            self.flash.init()

            # use mass erase if the address starts at 0
            mass_erase = flashPtr == 0
            if mass_erase:
                logging.debug("Erasing entire flash")
                self.flash.eraseAll()

            while len(self.flashData) > 0:
                size_to_write = min(self.flash.page_size, len(self.flashData))
                
                #Erase Page if flash has not been erased
                if not mass_erase:
                    logging.debug("Erasing page 0x%x", flashPtr)
                    self.flash.erasePage(flashPtr)

                #ProgramPage
                self.flash.programPage(flashPtr, self.flashData[:size_to_write])
                flashPtr += size_to_write

                self.flashData = self.flashData[size_to_write:]

                # print progress bar
                sys.stdout.write('\r')
                i = int((float(flashPtr - self.flashOffset)/float(bytes_to_be_written))*20.0)
                # the exact output you're looking for:
                sys.stdout.write("[%-20s] %d%%" % ('='*i, 5*i))
                sys.stdout.flush()
                
            sys.stdout.write("\n\r")
            
            self.flashData = []
            self.flashOffset = None

            # reset and stop on reset handler
            self.target.resetStopOnReset()
            
            return self.createRSPPacket("OK")
        
        elif 'Cont' in ops:
            if 'Cont?' in ops:
                return self.createRSPPacket("vCont;c;s;t")
                
        return None
    
    def unescape(self, data):
        data_idx = 0
    
        # unpack the data into binary array
        str_unpack = str(len(data)) + 'B'
        data = unpack(str_unpack, data)
        data = list(data)
    
        # check for escaped characters
        while data_idx < len(data):
            if data[data_idx] == 0x7d:
                data.pop(data_idx)
                data[data_idx] = data[data_idx] ^ 0x20
            data_idx += 1
            
        return data
            
        
    def getMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = split[1]
        length = int(length[:len(length)-3],16)
        
        try:
            val = ''
            mem = self.target.readBlockMemoryUnaligned8(addr, length)
            for x in mem:
                if x >= 0x10:
                    val += hex(x)[2:4]
                else:
                    val += '0' + hex(x)[2:3]
        except TransferError:
            logging.debug("getMemory failed at 0x%x" % addr)
            val = 'E01' #EPERM
        return self.createRSPPacket(val)
    
    def writeMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = int(split[1].split(':')[0], 16)
        
        idx_begin = 0
        for i in range(len(data)):
            if data[i] == ':':
                idx_begin += 1
                break
            idx_begin += 1
        
        data = data[idx_begin:len(data) - 3]
        data = self.unescape(data)
        
        try:
            if length > 0:
                self.target.writeBlockMemoryUnaligned8(addr, data)
            resp = "OK"
        except TransferError:
            logging.debug("writeMemory failed at 0x%x" % addr)
            resp = 'E01' #EPERM
        
        return self.createRSPPacket(resp)

    def writeRegister(self, data):
        reg = int(data.split('=')[0], 16)
        val = data.split('=')[1].split('#')[0]
        self.target.setRegister(reg, val)
        return self.createRSPPacket("OK")

    def getRegisters(self):
        return self.createRSPPacket(self.target.getRegisterContext())

    def setRegisters(self, data):
        self.target.setRegisterContext(data)
        return self.createRSPPacket("OK")

    def handleQuery(self, msg):
        query = msg.split(':')
        logging.debug('GDB received query: %s', query)

        if query is None:
            logging.error('GDB received query packet malformed')
            return None
        
        if query[0] == 'Supported':
            resp = "qXfer:memory-map:read+;qXfer:features:read+;PacketSize="
            resp += hex(self.packet_size)[2:]
            return self.createRSPPacket(resp)
            
        elif query[0] == 'Xfer':
            
            if query[1] == 'features' and query[2] == 'read' and \
               query[3] == 'target.xml':
                data = query[4].split(',')
                resp = self.handleQueryXML('read_feature', int(data[0], 16), int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)
            
            elif query[1] == 'memory-map' and query[2] == 'read':
                data = query[4].split(',')
                resp = self.handleQueryXML('memory_map', int(data[0], 16), int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)
                
            else:
                return None
            
        elif query[0] == 'C#b4':
            return self.createRSPPacket("")
        
        elif query[0].find('Attached') != -1:
            return self.createRSPPacket("1")
        
        elif query[0].find('TStatus') != -1:
            return self.createRSPPacket("")
        
        elif query[0].find('Tf') != -1:
            return self.createRSPPacket("")
        
        elif 'Offsets' in query[0]:
            resp = "Text=0;Data=0;Bss=0"
            return self.createRSPPacket(resp)
        
        elif 'Symbol' in query[0]:
            resp = "OK"
            return self.createRSPPacket(resp)

        elif query[0].startswith('Rcmd,'):
            cmd = self.hexDecode(query[0][5:].split('#')[0])
            logging.debug('Remote command: %s', cmd)

            safecmd = {
                'reset' : ['Reset target', 0x1],
                'halt'  : ['Halt target', 0x2],
                'resume': ['Resume target', 0x4],
                'help'  : ['Display this help', 0x80],
            }
            resultMask = 0x00
            if cmd == 'help':
                resp = ''
                for k,v in safecmd.items():
                    resp += '%s\t%s\n' % (k,v[0])
                resp = self.hexEncode(resp)
            else:
                cmdList = cmd.split(' ')
                #check whether all the cmds is valid cmd for monitor
                for cmd_sub in cmdList:
                    if not cmd_sub in safecmd:
                        #error cmd for monitor
                        logging.warning("Invalid mon command '%s'", cmd)
                        resp = 'Invalid Command: "%s"\n' % cmd
                        resp = self.hexEncode(resp)
                        return self.createRSPPacket(resp)
                    else:
                        resultMask = resultMask | safecmd[cmd_sub][1]
                #if it's a single cmd, just launch it!
                if len(cmdList) == 1:
                    tmp = eval ('self.target.%s()' % cmd_sub)
                    logging.debug(tmp)
                    resp = "OK"
                else:
                    #10000001 for help reset, so output reset cmd help information
                    if resultMask == 0x81:
                        resp = 'Reset the target\n'
                        resp = self.hexEncode(resp)
                    #10000010 for help halt, so output halt cmd help information
                    elif resultMask == 0x82:
                        resp = 'Halt the target\n'
                        resp = self.hexEncode(resp)
                    #10000100 for help resume, so output resume cmd help information
                    elif resultMask == 0x84:
                        resp = 'Resume the target\n'
                        resp = self.hexEncode(resp)
                    #11 for reset halt cmd, so launch self.target.resetStopOnReset()
                    elif resultMask == 0x3:
                        resp = "OK"
                        self.target.resetStopOnReset()
                    #111 for reset halt resume cmd, so launch self.target.resetStopOnReset() and self.target.resume()
                    elif resultMask == 0x7:
                        resp = "OK"
                        self.target.resetStopOnReset()
                        self.target.resume()
                    else:
                        logging.warning("Invalid mon command '%s'", cmd)
                        resp = 'Invalid Command: "%s"\n' % cmd
                        resp = self.hexEncode(resp)
            return self.createRSPPacket(resp)

        else:
            return self.createRSPPacket("")
            
    def handleQueryXML(self, query, offset, size):
        logging.debug('GDB query %s: offset: %s, size: %s', query, offset, size)
        xml = ''
        if query == 'memory_map':
            xml = self.target.memoryMapXML
        elif query == 'read_feature':
            xml = self.target.getTargetXML()

        size_xml = len(xml)
        
        prefix = 'm'
        
        if offset > size_xml:
            logging.error('GDB: offset target.xml > size!')
            return
        
        if size > (self.packet_size - 4):
            size = self.packet_size - 4
        
        nbBytesAvailable = size_xml - offset
        
        if size > nbBytesAvailable:
            prefix = 'l'
            size = nbBytesAvailable
        
        resp = prefix + xml[offset:offset + size]
        
        return resp
            
            
    def createRSPPacket(self, data):
        resp = '$' + data + '#'
        
        c = 0
        checksum = 0
        for c in data:
            checksum += ord(c)
        checksum = checksum % 256
        checksum = hex(checksum)

        if int(checksum[2:], 16) < 0x10:
            resp += '0'
        resp += checksum[2:]
        
        #logging.debug('--<<<<<<<<<<<< GDB rsp packet: %s', resp)
        return resp
    
    def ack(self):
        self.abstract_socket.write(b"+")

    def hexDecode(self, cmd):
        return ''.join([ chr(int(cmd[i:i+2], 16)) for i in range(0, len(cmd), 2)])

    def hexEncode(self, string):
        return ''.join(['%02x' % ord(i) for i in string])
コード例 #6
0
ファイル: gdbserver.py プロジェクト: Kazu-zamasu/pyOCD
class GDBServer(threading.Thread):
    """
    This class start a GDB server listening a gdb connection on a specific port.
    It implements the RSP (Remote Serial Protocol).
    """

    def __init__(self, board, port_urlWSS):
        threading.Thread.__init__(self)
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.abstract_socket = None
        self.wss_server = None
        self.port = 0
        if isinstance(port_urlWSS, str) == True:
            self.wss_server = port_urlWSS
        else:
            self.port = port_urlWSS
        self.packet_size = 2048
        self.flashData = list()
        self.conn = None
        self.lock = threading.Lock()
        self.shutdown_event = threading.Event()
        self.detach_event = threading.Event()
        self.quit = False
        if self.wss_server == None:
            self.abstract_socket = GDBSocket(self.port, self.packet_size)
        else:
            self.abstract_socket = GDBWebSocket(self.wss_server)
        self.setDaemon(True)
        self.start()

    def restart(self):
        if self.isAlive():
            self.detach_event.set()

    def stop(self):
        if self.isAlive():
            self.shutdown_event.set()
            while self.isAlive():
                pass
            logging.info("GDB server thread killed")
        self.board.uninit()

    def setBoard(self, board, stop=True):
        self.lock.acquire()
        if stop:
            self.restart()
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.lock.release()
        return

    def run(self):
        while True:
            new_command = False
            data = ""
            logging.info("GDB server started")

            self.shutdown_event.clear()
            self.detach_event.clear()

            while not self.shutdown_event.isSet() and not self.detach_event.isSet():
                connected = self.abstract_socket.connect()
                if connected != None:
                    break

            if self.shutdown_event.isSet():
                return

            if self.detach_event.isSet():
                continue

            logging.info("One client connected!")

            while True:

                if self.shutdown_event.isSet():
                    return

                if self.detach_event.isSet():
                    continue

                # read command
                while True:
                    if new_command == True:
                        new_command = False
                        break
                    try:
                        if self.shutdown_event.isSet() or self.detach_event.isSet():
                            break
                        self.abstract_socket.setBlocking(0)
                        data += self.abstract_socket.read()
                        if data.index("$") >= 0 and data.index("#") >= 0:
                            break
                    except (ValueError, socket.error):
                        pass

                if self.shutdown_event.isSet():
                    return

                if self.detach_event.isSet():
                    continue

                self.abstract_socket.setBlocking(1)

                data = data[data.index("$") :]

                self.lock.acquire()

                if len(data) != 0:
                    # decode and prepare resp
                    [resp, ack, detach] = self.handleMsg(data)

                    if resp is not None:
                        # ack
                        if ack:
                            resp = "+" + resp
                        # send resp
                        self.abstract_socket.write(resp)
                        # wait a '+' from the client
                        try:
                            data = self.abstract_socket.read()
                            if data[0] != "+":
                                logging.debug("gdb client has not ack!")
                            else:
                                logging.debug("gdb client has ack!")
                            if data.index("$") >= 0 and data.index("#") >= 0:
                                new_command = True
                        except:
                            pass

                    if detach:
                        self.abstract_socket.close()
                        self.lock.release()
                        break

                self.lock.release()

    def handleMsg(self, msg):

        if msg[0] != "$":
            logging.debug("msg ignored: first char != $")
            return None, 0, 0

        # logging.debug('-->>>>>>>>>>>> GDB rsp packet: %s', msg)

        # query command
        if msg[1] == "q":
            return self.handleQuery(msg[2:]), 1, 0

        elif msg[1] == "H":
            return self.createRSPPacket(""), 1, 0

        elif msg[1] == "?":
            return self.lastSignal(), 1, 0

        elif msg[1] == "g":
            return self.getRegister(), 1, 0

        elif msg[1] == "p":
            return self.readRegister(msg[2:]), 1, 0

        elif msg[1] == "P":
            return self.writeRegister(msg[2:]), 1, 0

        elif msg[1] == "m":
            return self.getMemory(msg[2:]), 1, 0

        elif msg[1] == "X":
            return self.writeMemory(msg[2:]), 1, 0

        elif msg[1] == "v":
            return self.flashOp(msg[2:]), 1, 0

        # we don't send immediately the response for C and S commands
        elif msg[1] == "C" or msg[1] == "c":
            return self.resume()

        elif msg[1] == "S" or msg[1] == "s":
            return self.step()

        elif msg[1] == "Z" or msg[1] == "z":
            return self.breakpoint(msg[1:]), 1, 0

        elif msg[1] == "D":
            return self.detach(msg[1:]), 1, 1

        elif msg[1] == "k":
            return self.kill(), 1, 1

        else:
            logging.error("Unknown RSP packet: %s", msg)
            return self.createRSPPacket("")

    def detach(self, data):
        resp = "OK"
        return self.createRSPPacket(resp)

    def kill(self):
        return self.createRSPPacket("")

    def breakpoint(self, data):
        # handle Z1/z1 commands
        addr = int(data.split(",")[1], 16)
        if data[1] == "1":
            if data[0] == "Z":
                if self.target.setBreakpoint(addr) == False:
                    resp = "ENN"
                    return self.createRSPPacket(resp)
            else:
                self.target.removeBreakpoint(addr)
            resp = "OK"
            return self.createRSPPacket(resp)

        return None

    def resume(self):
        self.ack()
        self.target.resume()
        self.abstract_socket.setBlocking(0)

        # Try to set break point at hardfault handler to avoid
        # halting target constantly
        if self.target.availableBreakpoint() >= 1:
            bpSet = True
            hardfault_handler = self.target.readMemory(4 * 3)
            self.target.setBreakpoint(hardfault_handler)
        else:
            bpSet = False
            logging.info("No breakpoint available. Interfere target constantly.")

        val = ""

        while True:
            sleep(0.01)

            try:
                data = self.abstract_socket.read()
                if data[0] == "\x03":
                    self.target.halt()
                    val = "S05"
                    logging.debug("receive CTRL-C")
                    break
            except:
                pass

            if self.target.getState() == TARGET_HALTED:
                logging.debug("state halted")
                xpsr = self.target.readCoreRegister("xpsr")
                # Get IPSR value from XPSR
                if (xpsr & 0x1F) == 3:
                    val = "S" + FAULT[3]
                else:
                    val = "S05"
                break

            if not bpSet:
                # Only do this when no bp available as it slows resume operation
                self.target.halt()
                xpsr = self.target.readCoreRegister("xpsr")
                logging.debug("GDB resume xpsr: 0x%X", xpsr)
                # Get IPSR value from XPSR
                if (xpsr & 0x1F) == 3:
                    val = "S" + FAULT[3]
                    break
                self.target.resume()

        if bpSet:
            self.target.removeBreakpoint(hardfault_handler)

        self.abstract_socket.setBlocking(1)
        return self.createRSPPacket(val), 0, 0

    def step(self):
        self.ack()
        self.target.step()
        return self.createRSPPacket("S05"), 0, 0

    def halt(self):
        self.ack()
        self.target.halt()
        return self.createRSPPacket("S05"), 0, 0

    def flashOp(self, data):
        ops = data.split(":")[0]
        # logging.debug("flash op: %s", ops)

        if ops == "FlashErase":
            self.flash.init()
            self.flash.eraseAll()
            return self.createRSPPacket("OK")

        elif ops == "FlashWrite":
            write_addr = int(data.split(":")[1], 16)
            logging.debug("flash write addr: 0x%s", write_addr)
            # search for second ':' (beginning of data encoded in the message)
            second_colon = 0
            idx_begin = 0
            while second_colon != 2:
                if data[idx_begin] == ":":
                    second_colon += 1
                idx_begin += 1

            # if there's gap between sections, fill it
            flash_watermark = len(self.flashData)
            pad_size = write_addr - flash_watermark
            if pad_size > 0:
                self.flashData += [0xFF] * pad_size

            # append the new data if it doesn't overlap existing data
            if write_addr >= flash_watermark:
                self.flashData += self.unescape(data[idx_begin : len(data) - 3])
            else:
                logging.error(
                    "Invalid FlashWrite address %d overlaps current data of size %d", write_addr, flash_watermark
                )

            return self.createRSPPacket("OK")

        # we need to flash everything
        elif "FlashDone" in ops:
            flashPtr = 0
            bytes_to_be_written = len(self.flashData)

            """
            bin = open(os.path.join(parentdir, 'res', 'bad_bin.txt'), "w+")
            
            i = 0
            while (i < bytes_to_be_written):
                bin.write(str(self.flashData[i:i+16]) + "\n")
                i += 16
            """

            logging.info("flashing %d bytes", bytes_to_be_written)

            while len(self.flashData) > 0:
                size_to_write = min(self.flash.page_size, len(self.flashData))
                # if 0 is returned from programPage, security check failed
                if self.flash.programPage(flashPtr, self.flashData[:size_to_write]) == 0:
                    logging.error("Protection bits error, flashing has stopped")
                    return None
                flashPtr += size_to_write

                self.flashData = self.flashData[size_to_write:]

                # print progress bar
                sys.stdout.write("\r")
                i = int((float(flashPtr) / float(bytes_to_be_written)) * 20.0)
                # the exact output you're looking for:
                sys.stdout.write("[%-20s] %d%%" % ("=" * i, 5 * i))
                sys.stdout.flush()

            sys.stdout.write("\n\r")

            self.flashData = []

            """
            bin.close()
            """

            # reset and stop on reset handler
            self.target.resetStopOnReset()

            return self.createRSPPacket("OK")

        elif "Cont" in ops:
            if "Cont?" in ops:
                return self.createRSPPacket("vCont;c;s;t")

        return None

    def unescape(self, data):
        data_idx = 0

        # unpack the data into binary array
        str_unpack = str(len(data)) + "B"
        data = unpack(str_unpack, data)
        data = list(data)

        # check for escaped characters
        while data_idx < len(data):
            if data[data_idx] == 0x7D:
                data.pop(data_idx)
                data[data_idx] = data[data_idx] ^ 0x20
            data_idx += 1

        return data

    def getMemory(self, data):
        split = data.split(",")
        addr = int(split[0], 16)
        length = split[1]
        length = int(length[: len(length) - 3], 16)

        val = ""

        mem = self.target.readBlockMemoryUnaligned8(addr, length)
        for x in mem:
            if x >= 0x10:
                val += hex(x)[2:4]
            else:
                val += "0" + hex(x)[2:3]

        return self.createRSPPacket(val)

    def writeMemory(self, data):
        split = data.split(",")
        addr = int(split[0], 16)
        length = int(split[1].split(":")[0], 16)

        idx_begin = 0
        for i in range(len(data)):
            if data[i] == ":":
                idx_begin += 1
                break
            idx_begin += 1

        data = data[idx_begin : len(data) - 3]
        data = self.unescape(data)

        if length > 0:
            self.target.writeBlockMemoryUnaligned8(addr, data)

        return self.createRSPPacket("OK")

    def readRegister(self, data):
        num = int(data.split("#")[0], 16)
        reg = self.target.readCoreRegister(num)
        logging.debug("GDB: read reg %d: 0x%X", num, reg)
        val = self.intToHexGDB(reg)
        return self.createRSPPacket(val)

    def writeRegister(self, data):
        num = int(data.split("=")[0], 16)
        val = data.split("=")[1].split("#")[0]
        val = val[6:8] + val[4:6] + val[2:4] + val[0:2]
        logging.debug("GDB: write reg %d: 0x%X", num, int(val, 16))
        self.target.writeCoreRegister(num, int(val, 16))
        return self.createRSPPacket("OK")

    def intToHexGDB(self, val):
        val = hex(int(val))[2:]
        size = len(val)
        r = ""
        for i in range(8 - size):
            r += "0"
        r += str(val)

        resp = ""
        for i in range(4):
            resp += r[8 - 2 * i - 2 : 8 - 2 * i]

        return resp

    def getRegister(self):
        resp = ""
        # only core registers are printed
        for i in sorted(CORE_REGISTER.values())[4:20]:
            reg = self.target.readCoreRegister(i)
            resp += self.intToHexGDB(reg)
            logging.debug("GDB reg: %s = 0x%X", self.target.getRegisterName(i), reg)
        return self.createRSPPacket(resp)

    def lastSignal(self):
        fault = self.target.readCoreRegister("xpsr") & 0xFF
        try:
            fault = FAULT[fault]
        except:
            # Values above 16 are for interrupts
            fault = "17"  # SIGSTOP
            pass
        logging.debug("GDB lastSignal: %s", fault)
        return self.createRSPPacket("S" + fault)

    def handleQuery(self, msg):
        query = msg.split(":")
        logging.debug("GDB received query: %s", query)

        if query is None:
            logging.error("GDB received query packet malformed")
            return None

        if query[0] == "Supported":
            resp = "qXfer:memory-map:read+;qXfer:features:read+;PacketSize="
            resp += hex(self.packet_size)[2:]
            return self.createRSPPacket(resp)

        elif query[0] == "Xfer":

            if query[1] == "features" and query[2] == "read" and query[3] == "target.xml":
                data = query[4].split(",")
                resp = self.handleQueryXML("read_feature", int(data[0], 16), int(data[1].split("#")[0], 16))
                return self.createRSPPacket(resp)

            elif query[1] == "memory-map" and query[2] == "read":
                data = query[4].split(",")
                resp = self.handleQueryXML("memory_map", int(data[0], 16), int(data[1].split("#")[0], 16))
                return self.createRSPPacket(resp)

            else:
                return None

        elif query[0] == "C#b4":
            return self.createRSPPacket("")

        elif query[0].find("Attached") != -1:
            return self.createRSPPacket("1")

        elif query[0].find("TStatus") != -1:
            return self.createRSPPacket("")

        elif query[0].find("Tf") != -1:
            return self.createRSPPacket("")

        elif "Offsets" in query[0]:
            resp = "Text=0;Data=0;Bss=0"
            return self.createRSPPacket(resp)

        elif "Symbol" in query[0]:
            resp = "OK"
            return self.createRSPPacket(resp)

        else:
            return self.createRSPPacket("")

    def handleQueryXML(self, query, offset, size):
        logging.debug("GDB query %s: offset: %s, size: %s", query, offset, size)
        xml = ""
        if query == "memory_map":
            xml = self.target.memoryMapXML
        elif query == "read_feature":
            xml = self.target.targetXML

        size_xml = len(xml)

        prefix = "m"

        if offset > size_xml:
            logging.error("GDB: offset target.xml > size!")
            return

        if size > (self.packet_size - 4):
            size = self.packet_size - 4

        nbBytesAvailable = size_xml - offset

        if size > nbBytesAvailable:
            prefix = "l"
            size = nbBytesAvailable

        resp = prefix + xml[offset : offset + size]

        return resp

    def createRSPPacket(self, data):
        resp = "$" + data + "#"

        c = 0
        checksum = 0
        for c in data:
            checksum += ord(c)
        checksum = checksum % 256
        checksum = hex(checksum)

        if int(checksum[2:], 16) < 0x10:
            resp += "0"
        resp += checksum[2:]

        # logging.debug('--<<<<<<<<<<<< GDB rsp packet: %s', resp)
        return resp

    def ack(self):
        self.abstract_socket.write("+")
コード例 #7
0
class GDBServer(threading.Thread):
    """
    This class start a GDB server listening a gdb connection on a specific port.
    It implements the RSP (Remote Serial Protocol).
    """
    def __init__(self, board, port_urlWSS):
        threading.Thread.__init__(self)
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.abstract_socket = None
        self.wss_server = None
        self.port = 0
        if isinstance(port_urlWSS, str) == True:
            self.wss_server = port_urlWSS
        else:
            self.port = port_urlWSS
        self.packet_size = 2048
        self.flashData = ""
        self.conn = None
        self.lock = threading.Lock()
        self.shutdown_event = threading.Event()
        self.detach_event = threading.Event()
        self.quit = False
        if self.wss_server == None:
            self.abstract_socket = GDBSocket(self.port, self.packet_size)
        else:
            self.abstract_socket = GDBWebSocket(self.wss_server)
        self.start()

    def restart(self):
        if self.isAlive():
            self.detach_event.set()

    def stop(self):
        if self.isAlive():
            self.shutdown_event.set()
            while self.isAlive():
                pass
            logging.info("GDB server thread killed")
        self.board.uninit()

    def setBoard(self, board, stop=True):
        self.lock.acquire()
        if stop:
            self.restart()
        self.board = board
        self.target = board.target
        self.flash = board.flash
        self.lock.release()
        return

    def run(self):
        while True:
            new_command = False
            data = []
            logging.info('GDB server started')

            self.shutdown_event.clear()
            self.detach_event.clear()

            while not self.shutdown_event.isSet(
            ) and not self.detach_event.isSet():
                connected = self.abstract_socket.connect()
                if connected != None:
                    break

            if self.shutdown_event.isSet():
                return

            if self.detach_event.isSet():
                continue

            logging.info("One client connected!")

            while True:

                if self.shutdown_event.isSet():
                    return

                if self.detach_event.isSet():
                    continue

                # read command
                while True:
                    if (new_command == True):
                        new_command = False
                        break
                    try:
                        if self.shutdown_event.isSet(
                        ) or self.detach_event.isSet():
                            break
                        self.abstract_socket.setBlocking(0)
                        data = self.abstract_socket.read()
                        if data.index("$") >= 0 and data.index("#") >= 0:
                            break
                    except (ValueError, socket.error):
                        pass

                if self.shutdown_event.isSet():
                    return

                if self.detach_event.isSet():
                    continue

                self.abstract_socket.setBlocking(1)

                data = data[data.index("$"):]

                self.lock.acquire()

                if len(data) != 0:
                    # decode and prepare resp
                    [resp, ack, detach] = self.handleMsg(data)

                    if resp is not None:
                        # ack
                        if ack:
                            resp = "+" + resp
                        # send resp
                        self.abstract_socket.write(resp)
                        # wait a '+' from the client
                        try:
                            data = self.abstract_socket.read()
                            if data[0] != '+':
                                logging.debug('gdb client has not ack!')
                            else:
                                logging.debug('gdb client has ack!')
                            if data.index("$") >= 0 and data.index("#") >= 0:
                                new_command = True
                        except:
                            pass

                    if detach:
                        self.abstract_socket.close()
                        self.lock.release()
                        break

                self.lock.release()

    def handleMsg(self, msg):

        if msg[0] != '$':
            logging.debug('msg ignored: first char != $')
            return None, 0, 0

        #logging.debug('-->>>>>>>>>>>> GDB rsp packet: %s', msg)

        # query command
        if msg[1] == 'q':
            return self.handleQuery(msg[2:]), 1, 0

        elif msg[1] == 'H':
            return self.createRSPPacket(''), 1, 0

        elif msg[1] == '?':
            return self.lastSignal(), 1, 0

        elif msg[1] == 'g':
            return self.getRegister(), 1, 0

        elif msg[1] == 'p':
            return self.readRegister(msg[2:]), 1, 0

        elif msg[1] == 'P':
            return self.writeRegister(msg[2:]), 1, 0

        elif msg[1] == 'm':
            return self.getMemory(msg[2:]), 1, 0

        elif msg[1] == 'X':
            return self.writeMemory(msg[2:]), 1, 0

        elif msg[1] == 'v':
            return self.flashOp(msg[2:]), 1, 0

        # we don't send immediately the response for C and S commands
        elif msg[1] == 'C' or msg[1] == 'c':
            return self.resume()

        elif msg[1] == 'S' or msg[1] == 's':
            return self.step()

        elif msg[1] == 'Z' or msg[1] == 'z':
            return self.breakpoint(msg[1:]), 1, 0

        elif msg[1] == 'D':
            return self.detach(msg[1:]), 1, 1

        elif msg[1] == 'k':
            return self.kill(), 1, 1

        else:
            logging.error("Unknown RSP packet: %s", msg)
            return None

    def detach(self, data):
        resp = "OK"
        return self.createRSPPacket(resp)

    def kill(self):
        return self.createRSPPacket("")

    def breakpoint(self, data):
        # handle Z1/z1 commands
        addr = int(data.split(',')[1], 16)
        if data[1] == '1':
            if data[0] == 'Z':
                if self.target.setBreakpoint(addr) == False:
                    resp = "ENN"
                    return self.createRSPPacket(resp)
            else:
                self.target.removeBreakpoint(addr)
            resp = "OK"
            return self.createRSPPacket(resp)

        return None

    def resume(self):
        self.ack()
        self.target.resume()
        self.abstract_socket.setBlocking(0)

        val = ''

        while True:
            sleep(0.01)

            try:
                data = self.abstract_socket.read()
                if (data[0] == '\x03'):
                    self.target.halt()
                    val = 'S05'
                    logging.debug("receive CTRL-C")
                    break
            except:
                pass

            if self.target.getState() == TARGET_HALTED:
                logging.debug("state halted")
                val = 'S05'
                break

            self.target.halt()
            ipsr = self.target.readCoreRegister('xpsr')
            logging.debug("GDB resume xpsr: 0x%X", ipsr)
            if (ipsr & 0x1f) == 3:
                val = "S" + FAULT[3]
                break
            self.target.resume()

        self.abstract_socket.setBlocking(1)
        return self.createRSPPacket(val), 0, 0

    def step(self):
        self.ack()
        self.target.step()
        return self.createRSPPacket("S05"), 0, 0

    def halt(self):
        self.ack()
        self.target.halt()
        return self.createRSPPacket("S05"), 0, 0

    def flashOp(self, data):
        ops = data.split(':')[0]
        #logging.debug("flash op: %s", ops)

        if ops == 'FlashErase':
            self.flash.init()
            self.flash.eraseAll()
            return self.createRSPPacket("OK")

        elif ops == 'FlashWrite':
            logging.debug("flash write addr: 0x%s", data.split(':')[1])
            # search for second ':' (beginning of data encoded in the message)
            second_colon = 0
            idx_begin = 0
            while second_colon != 2:
                if data[idx_begin] == ':':
                    second_colon += 1
                idx_begin += 1

            self.flashData += data[idx_begin:len(data) - 3]
            return self.createRSPPacket("OK")

        # we need to flash everything
        elif 'FlashDone' in ops:
            flashPtr = 0

            unescaped_data = self.unescape(self.flashData)

            bytes_to_be_written = len(unescaped_data)
            """
            bin = open(os.path.join(parentdir, 'res', 'bad_bin.txt'), "w+")
            
            i = 0
            while (i < bytes_to_be_written):
                bin.write(str(unescaped_data[i:i+16]) + "\n")
                i += 16
            """

            logging.info("flashing %d bytes", bytes_to_be_written)

            while len(unescaped_data) > 0:
                size_to_write = min(self.flash.page_size, len(unescaped_data))
                self.flash.programPage(flashPtr,
                                       unescaped_data[:size_to_write])
                flashPtr += size_to_write

                unescaped_data = unescaped_data[size_to_write:]

                # print progress bar
                sys.stdout.write('\r')
                i = int((float(flashPtr) / float(bytes_to_be_written)) * 20.0)
                # the exact output you're looking for:
                sys.stdout.write("[%-20s] %d%%" % ('=' * i, 5 * i))
                sys.stdout.flush()

            sys.stdout.write("\n\r")

            self.flashData = ""
            """
            bin.close()
            """

            # reset and stop on reset handler
            self.target.resetStopOnReset()

            return self.createRSPPacket("OK")

        elif 'Cont' in ops:
            if 'Cont?' in ops:
                return self.createRSPPacket("vCont;c;s;t")

        return None

    def unescape(self, data):
        data_idx = 0

        # unpack the data into binary array
        str_unpack = str(len(data)) + 'B'
        data = unpack(str_unpack, data)
        data = list(data)

        # check for escaped characters
        while data_idx < len(data):
            if data[data_idx] == 0x7d:
                data.pop(data_idx)
                data[data_idx] = data[data_idx] ^ 0x20
            data_idx += 1

        return data

    def getMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = split[1]
        length = int(length[:len(length) - 3], 16)

        val = ''

        mem = self.target.readBlockMemoryUnaligned8(addr, length)
        for x in mem:
            if x >= 0x10:
                val += hex(x)[2:4]
            else:
                val += '0' + hex(x)[2:3]

        return self.createRSPPacket(val)

    def writeMemory(self, data):
        split = data.split(',')
        addr = int(split[0], 16)
        length = int(split[1].split(':')[0], 16)

        idx_begin = 0
        for i in range(len(data)):
            if data[i] == ':':
                idx_begin += 1
                break
            idx_begin += 1

        data = data[idx_begin:len(data) - 3]
        data = self.unescape(data)

        if length > 0:
            self.target.writeBlockMemoryUnaligned8(addr, data)

        return self.createRSPPacket("OK")

    def readRegister(self, data):
        num = int(data.split('#')[0], 16)
        reg = self.target.readCoreRegister(num)
        logging.debug("GDB: read reg %d: 0x%X", num, reg)
        val = self.intToHexGDB(reg)
        return self.createRSPPacket(val)

    def writeRegister(self, data):
        num = int(data.split('=')[0], 16)
        val = data.split('=')[1].split('#')[0]
        val = val[6:8] + val[4:6] + val[2:4] + val[0:2]
        logging.debug("GDB: write reg %d: 0x%X", num, int(val, 16))
        self.target.writeCoreRegister(num, int(val, 16))
        return self.createRSPPacket("OK")

    def intToHexGDB(self, val):
        val = hex(int(val))[2:]
        size = len(val)
        r = ''
        for i in range(8 - size):
            r += '0'
        r += str(val)

        resp = ''
        for i in range(4):
            resp += r[8 - 2 * i - 2:8 - 2 * i]

        return resp

    def getRegister(self):
        resp = ''
        for i in range(len(CORE_REGISTER)):
            reg = self.target.readCoreRegister(i)
            resp += self.intToHexGDB(reg)
            logging.debug("GDB reg: %s = 0x%X", i, reg)
        return self.createRSPPacket(resp)

    def lastSignal(self):
        fault = self.target.readCoreRegister('xpsr') & 0xff
        fault = FAULT[fault]
        logging.debug("GDB lastSignal: %s", fault)
        return self.createRSPPacket('S' + fault)

    def handleQuery(self, msg):
        query = msg.split(':')
        logging.debug('GDB received query: %s', query)

        if query is None:
            logging.error('GDB received query packet malformed')
            return None

        if query[0] == 'Supported':
            resp = "qXfer:memory-map:read+;qXfer:features:read+;PacketSize="
            resp += hex(self.packet_size)[2:]
            return self.createRSPPacket(resp)

        elif query[0] == 'Xfer':

            if query[1] == 'features' and query[2] == 'read' and \
               query[3] == 'target.xml':
                data = query[4].split(',')
                resp = self.handleQueryXML('read_feature', int(data[0], 16),
                                           int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)

            elif query[1] == 'memory-map' and query[2] == 'read':
                data = query[4].split(',')
                resp = self.handleQueryXML('momery_map', int(data[0], 16),
                                           int(data[1].split('#')[0], 16))
                return self.createRSPPacket(resp)

            else:
                return None

        elif query[0] == 'C#b4':
            return self.createRSPPacket("")

        elif query[0].find('Attached') != -1:
            return self.createRSPPacket("1")

        elif query[0].find('TStatus') != -1:
            return self.createRSPPacket("")

        elif query[0].find('Tf') != -1:
            return self.createRSPPacket("")

        elif 'Offsets' in query[0]:
            resp = "Text=0;Data=0;Bss=0"
            return self.createRSPPacket(resp)

        elif 'Symbol' in query[0]:
            resp = "OK"
            return self.createRSPPacket(resp)

        else:
            return None

    def handleQueryXML(self, query, offset, size):
        logging.debug('GDB query %s: offset: %s, size: %s', query, offset,
                      size)
        xml = ''
        if query == 'momery_map':
            xml = self.flash.memoryMapXML
        elif query == 'read_feature':
            xml = self.target.targetXML

        size_xml = len(xml)

        prefix = 'm'

        if offset > size_xml:
            logging.error('GDB: offset target.xml > size!')
            return

        if size > (self.packet_size - 4):
            size = self.packet_size - 4

        nbBytesAvailable = size_xml - offset

        if size > nbBytesAvailable:
            prefix = 'l'
            size = nbBytesAvailable

        resp = prefix + xml[offset:offset + size]

        return resp

    def createRSPPacket(self, data):
        resp = '$' + data + '#'

        c = 0
        checksum = 0
        for c in data:
            checksum += ord(c)
        checksum = checksum % 256
        checksum = hex(checksum)

        if int(checksum[2:], 16) < 0x10:
            resp += '0'
        resp += checksum[2:]

        #logging.debug('--<<<<<<<<<<<< GDB rsp packet: %s', resp)
        return resp

    def ack(self):
        self.abstract_socket.write("+")