def test_ipv6_multiple_lines_confg(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='Ethernet3/7', device=dev1, \
aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'multiple lines config'
ipv6a = IPv6Addr(device=dev1)
ipv6a.ipv6 = IPv6Address('2001:db1:1::1')
ipv6a.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6a)
ipv6b = IPv6Addr(device=dev1)
ipv6b.ipv6 = IPv6Address('2001:db1:2::2')
ipv6b.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6b)
intf1.shutdown = False
# make intf2 as L3 interface
intf1.switchport_enable = False
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface Ethernet3/7',
' description multiple lines config',
' no shutdown',
' no switchport',
' ipv6 address 2001:db1:1::1/64',
' ipv6 address 2001:db1:2::2/64',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'default interface Ethernet3/7',
]))
def test_ipv6_multiple_lines_confg(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='iosxr')
intf1 = Interface(name='GigabitEthernet0/0/0/0', device=dev1, \
aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'multiple lines config'
intf1.enabled = False
ipv6a = IPv6Addr(device=dev1)
ipv6a.ipv6 = IPv6Address('2001:db1:1::1')
ipv6a.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6a)
ipv6b = IPv6Addr(device=dev1)
ipv6b.ipv6 = IPv6Address('2001:db1:2::2')
ipv6b.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6b)
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface GigabitEthernet0/0/0/0',
' ipv6 address 2001:db1:1::1/64',
' ipv6 address 2001:db1:2::2/64',
' description multiple lines config',
' shutdown',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False, attributes={'ipv6addr':None})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'interface GigabitEthernet0/0/0/0',
' no ipv6 address 2001:db1:1::1/64',
' no ipv6 address 2001:db1:2::2/64',
' exit'
]))
def configure_intf_ipv6(self, conf_obj, ip, mask, **kwargs):
# add old ipv6 attributes in conf_object
# for remove the original ipv6 configurations
ipv6 = IPv6Addr(device=kwargs['device'])
for ipInfo in self.keys.values():
if 'ip' in ipInfo:
ipv6.ipv6 = IPv6Address(ipInfo['ip'])
if 'mask' in ipInfo:
ipv6.ipv6_prefix_length = ipInfo['mask']
conf_obj.add_ipv6addr(ipv6)
# remove all existing ipv6 configurations
conf_obj.build_unconfig(attributes={'ipv6addr': None})
# clear the used attribtues
conf_obj.ipv6addr.clear()
# configure new ipv6 address
ipv6 = IPv6Addr(device=kwargs['device'])
ipv6.ipv6 = IPv6Address(ip)
ipv6.ipv6_prefix_length = mask
conf_obj.add_ipv6addr(ipv6)
conf_obj.build_config()
def test_all_ethernet(self):
testbed = Testbed()
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Defining attributes section
intf1.description = 'test desc'
intf1.enabled = True
intf1.link_up_down_trap_enable = True
intf1.mtu = 500
intf1.vrf = vrf
intf1.vrf_downstream = 'vrf_downstream_test'
intf1.mac_address = 'aaaa.bbbb.cccc'
intf1.bandwidth = 768
intf1.link_status = True
intf1.load_interval = 30
intf1.encapsulation = 'dot1q'
intf1.first_dot1q = '20'
intf1.second_dot1q = '30'
ipv4a = IPv4Addr(device=dev1)
ipv4a.ipv4 = IPv4Address('192.168.1.1')
ipv4a.prefix_length = '24'
intf1.add_ipv4addr(ipv4a)
ipv4b = IPv4Addr(device=dev1)
ipv4b.ipv4 = IPv4Address('192.168.1.2')
ipv4b.prefix_length = '24'
ipv4b.ipv4_secondary = True
intf1.add_ipv4addr(ipv4b)
ipv6a = IPv6Addr(device=dev1)
ipv6a.ipv6 = IPv6Address('2001:db1:1::1')
ipv6a.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6a)
ipv6b = IPv6Addr(device=dev1)
ipv6b.ipv6 = IPv6Address('2001:db1:2::2')
ipv6b.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6b)
ipv6b.ipv6_anycast = True
intf1.dhcp = True
intf1.dhcp_client_id = '10'
intf1.dhcp_hostname = 'dhcp-host'
intf1.unnumbered_intf_ref = 'GigabitEthernet0/0/2.20'
intf1.ipv6_unnumbered_intf_ref = 'GigabitEthernet0/0/3.100'
intf1.ipv6_enabled = True
intf1.ipv6_autoconf = True
intf1.ipv6_autoconf_default = True
intf1.medium = "broadcast"
intf1.delay = 100
intf1.port_speed = '1000'
intf1.auto_negotiate = True
intf1.duplex_mode = "full"
intf1.flow_control_receive = True
intf1.flow_control_send = False
# Check config
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' encapsulation dot1q 20 second-dot1q 30',
' vrf forwarding test downstream vrf_downstream_test',
' description test desc',
' bandwidth 768',
' mtu 500',
' no shutdown',
' snmp trap link-status',
' logging event link-status',
' load-interval 30',
' ipv6 enable',
' ipv6 address autoconfig default',
' ip unnumbered GigabitEthernet0/0/2.20',
' ipv6 unnumbered GigabitEthernet0/0/3.100',
' speed 1000',
' negotiation auto',
' duplex full',
' flowcontrol receive on',
' flowcontrol send off',
' ip address dhcp client-id 10 hostname dhcp-host',
' medium broadcast',
' delay 100',
' ip address 192.168.1.1 255.255.255.0',
' ip address 192.168.1.2 255.255.255.0 secondary',
' ipv6 address 2001:db1:1::1/64',
' ipv6 address 2001:db1:2::2/64 anycast',
' mac-address aaaa.bbbb.cccc',
' exit',
]))
# Check unconfig without attribtues
uncfg = intf1.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'default interface GigabitEthernet0/0/1',
'interface GigabitEthernet0/0/1',
'shutdown',
]))
# Check ipv4 unconfig
uncfg = intf1.build_unconfig(apply=False, attributes="ipv4addr")
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no ip address 192.168.1.1 255.255.255.0',
' no ip address 192.168.1.2 255.255.255.0 secondary',
' exit',
]))
# Check encapsulation unconfig
uncfg = intf1.build_unconfig(apply=False,
attributes={
"encapsulation": None,
"first_dot1q": None
})
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no encapsulation dot1q',
' exit',
]))
def test_mcast_config(self):
# For failures
self.maxDiff = None
# VRF configuration
vrf1 = Vrf('VRF1')
self.mld.device_attr[self.dev1].require_router_alert = True
mld1 = self.mld.device_attr[self.dev1].vrf_attr[vrf1]
ssm1 = Ssm(device=self.dev1)
ssm1.ssm_group_range = 'ff31::1/128'
ssm1.ssm_source_addr = '2001:db8:1:1::1'
mld1.add_ssm(ssm1)
ssm2 = Ssm(device=self.dev1)
ssm2.ssm_group_range = 'ff32::1/128'
ssm2.ssm_source_addr = '2001:db8:1:1::1'
mld1.add_ssm(ssm2)
# Interface configuration
intf1_obj = Interface(device=self.dev1, name='Ethernet2/2')
intf1_obj.vrf = vrf1
intf1 = intf1_obj.name
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.enable = True
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.robustness_variable = 7
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.group_policy = 'test2'
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.immediate_leave = True
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.max_groups = 6400
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.query_interval = 366
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.query_max_response_time = 15
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.version = 2
# join and static groups configuration
mld_intf1 = self.mld.device_attr[
self.dev1].vrf_attr[vrf1].interface_attr[intf1]
join_group1 = MldGroup(device=self.dev1)
join_group1.join_group = 'fffe::1'
join_group2 = MldGroup(device=self.dev1)
join_group2.join_group = 'ff30::1'
join_group2.join_group_source_addr = '2001:db8:0:abcd::1'
static_group1 = MldGroup(device=self.dev1)
static_group1.static_group = 'fffe::2'
static_group2 = MldGroup(device=self.dev1)
static_group2.static_group = 'ff30::2'
static_group2.static_group_source_addr = '2001:db8:0:abcd::2'
mld_intf1.add_groups(join_group1)
mld_intf1.add_groups(join_group2)
mld_intf1.add_groups(static_group1)
mld_intf1.add_groups(static_group2)
vrf2 = Vrf('default')
mld2 = self.mld.device_attr[self.dev1].vrf_attr[vrf2]
ssm1 = Ssm(device=self.dev1)
ssm1.ssm_group_range = 'ff31::1/128'
ssm1.ssm_source_addr = '2001:db8:1:1::1'
mld2.add_ssm(ssm1)
ssm2 = Ssm(device=self.dev1)
ssm2.ssm_group_range = 'ff31::1/128'
ssm2.ssm_source_addr = '2001:db8:1:1::2'
mld2.add_ssm(ssm2)
# Interface configuration
intf2_obj = Interface(device=self.dev1, name='Ethernet2/1')
ipv6a = IPv6Addr(device=self.dev1)
ipv6a.ipv6 = '2001:db1:1:1::1'
ipv6a.ipv6_prefix_length = '64'
intf2_obj.add_ipv6addr(ipv6a)
intf2 = intf2_obj.name
self.mld.device_attr[self.dev1].vrf_attr[vrf2].interface_attr[intf2]\
.enable = True
# join and static groups configuration
mld_intf1 = self.mld.device_attr[
self.dev1].vrf_attr[vrf2].interface_attr[intf2]
join_group = MldGroup(device=self.dev1)
join_group.join_group = 'ff30::1'
join_group.join_group_source_addr = '2001:db8:0:abcd::1'
static_group = MldGroup(device=self.dev1)
static_group.static_group = 'fffe::2'
mld_intf1.add_groups(join_group)
mld_intf1.add_groups(static_group)
# Build interface config for none-default vrfs
intf_cfgs = intf1_obj.build_config(apply=False)
self.assertMultiLineEqual(
str(intf_cfgs), '\n'.join([
'interface Ethernet2/2',
' vrf member VRF1',
' exit',
]))
intf_cfgs = intf2_obj.build_config(apply=False)
self.assertMultiLineEqual(
str(intf_cfgs), '\n'.join([
'interface Ethernet2/1',
' ipv6 address 2001:db1:1:1::1/64',
' exit',
]))
# Build mld configuration
cfgs = self.mld.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'ipv6 mld ssm-translate ff31::1/128 2001:db8:1:1::1',
'ipv6 mld ssm-translate ff31::1/128 2001:db8:1:1::2',
'interface Ethernet2/1',
' ipv6 pim sparse-mode',
' ipv6 mld join-group ff30::1 source 2001:db8:0:abcd::1',
' ipv6 mld static-oif fffe::2',
' exit',
'vrf context VRF1',
' ipv6 mld ssm-translate ff31::1/128 2001:db8:1:1::1',
' ipv6 mld ssm-translate ff32::1/128 2001:db8:1:1::1',
' exit',
'interface Ethernet2/2',
' ipv6 pim sparse-mode',
' ipv6 mld access-group test2',
' ipv6 mld immediate-leave',
' ipv6 mld state-limit 6400',
' ipv6 mld query-interval 366',
' ipv6 mld query-max-response-time 15',
' ipv6 mld robustness-variable 7',
' ipv6 mld version 2',
' ipv6 mld join-group ff30::1 source 2001:db8:0:abcd::1',
' ipv6 mld static-oif ff30::2 source 2001:db8:0:abcd::2',
' ipv6 mld join-group fffe::1',
' ipv6 mld static-oif fffe::2',
' exit',
]))
# Build unconfig
cfgs = self.mld.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no ipv6 mld ssm-translate ff31::1/128 2001:db8:1:1::1',
'no ipv6 mld ssm-translate ff31::1/128 2001:db8:1:1::2',
'interface Ethernet2/1',
' no ipv6 pim sparse-mode',
' no ipv6 mld join-group ff30::1 source 2001:db8:0:abcd::1',
' no ipv6 mld static-oif fffe::2',
' exit',
'no vrf context VRF1',
'interface Ethernet2/2',
' no ipv6 pim sparse-mode',
' no ipv6 mld access-group test2',
' no ipv6 mld immediate-leave',
' no ipv6 mld state-limit 6400',
' no ipv6 mld query-interval 366',
' no ipv6 mld query-max-response-time 15',
' no ipv6 mld robustness-variable 7',
' no ipv6 mld version 2',
' no ipv6 mld join-group ff30::1 source 2001:db8:0:abcd::1',
' no ipv6 mld static-oif ff30::2 source 2001:db8:0:abcd::2',
' no ipv6 mld join-group fffe::1',
' no ipv6 mld static-oif fffe::2',
' exit',
]))
# Build unconfig with attribute
cfgs = self.mld.build_unconfig(apply=False,
attributes={
'device_attr': {
self.dev1: {
'vrf_attr': {
vrf1: {
'ssm': None,
},
vrf2: {
'interface_attr': {
'Ethernet2/1': {
'enable':
True
}
}
}
}
}
}
})
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface Ethernet2/1',
' no ipv6 pim sparse-mode',
' exit',
'vrf context VRF1',
' no ipv6 mld ssm-translate ff31::1/128 2001:db8:1:1::1',
' no ipv6 mld ssm-translate ff32::1/128 2001:db8:1:1::1',
' exit',
]))
def test_mcast_config(self):
# For failures
self.maxDiff = None
# VRF configuration
vrf1 = Vrf('VRF1')
self.mld.device_attr[
self.dev1].vrf_attr[vrf1].global_max_groups = 63999
mld1 = self.mld.device_attr[self.dev1].vrf_attr[vrf1]
ssm1 = Ssm(device=self.dev1)
ssm1.ssm_group_policy = 'test'
ssm1.ssm_source_addr = '2001:DB8:1:1::1'
mld1.add_ssm(ssm1)
# Interface configuration
intf1_obj = Interface(device=self.dev1, name='GigabitEthernet2')
intf1_obj.vrf = vrf1
intf1 = intf1_obj.name
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.enable = True
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.group_policy = 'test2'
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.max_groups = 6400
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.query_interval = 366
self.mld.device_attr[self.dev1].vrf_attr[vrf1].interface_attr[intf1]\
.query_max_response_time = 16
# join and static groups configuration
mld_intf1 = self.mld.device_attr[
self.dev1].vrf_attr[vrf1].interface_attr[intf1]
join_group1 = MldGroup(device=self.dev1)
join_group1.join_group = 'FF25:2::1'
join_group2 = MldGroup(device=self.dev1)
join_group2.join_group = 'FF15:1::1'
join_group2.join_group_source_addr = '2001:DB8:2:2::2'
static_group1 = MldGroup(device=self.dev1)
static_group1.static_group = 'FF45:1::1'
static_group2 = MldGroup(device=self.dev1)
static_group2.static_group = 'FF35:1::1'
static_group2.static_group_source_addr = '2001:DB8:3:3::3'
mld_intf1.add_groups(join_group1)
mld_intf1.add_groups(join_group2)
mld_intf1.add_groups(static_group1)
mld_intf1.add_groups(static_group2)
vrf2 = Vrf('default')
self.mld.device_attr[
self.dev1].vrf_attr[vrf2].global_max_groups = 63999
mld2 = self.mld.device_attr[self.dev1].vrf_attr[vrf2]
ssm1 = Ssm(device=self.dev1)
ssm1.ssm_group_policy = 'test'
ssm1.ssm_source_addr = '2001:DB8:1:1::1'
mld2.add_ssm(ssm1)
# Interface configuration
intf2_obj = Interface(device=self.dev1, name='GigabitEthernet1')
ipv6a = IPv6Addr(device=self.dev1)
ipv6a.ipv6 = '2001:DB8:1:1::1'
ipv6a.ipv6_prefix_length = '64'
intf2_obj.add_ipv6addr(ipv6a)
intf2 = intf2_obj.name
self.mld.device_attr[self.dev1].vrf_attr[vrf2].interface_attr[intf2]\
.enable = True
# join and static groups configuration
mld_intf1 = self.mld.device_attr[
self.dev1].vrf_attr[vrf2].interface_attr[intf2]
join_group = MldGroup(device=self.dev1)
join_group.join_group = 'FF15:1::1'
join_group.join_group_source_addr = '2001:DB8:2:2::2'
static_group = MldGroup(device=self.dev1)
static_group.static_group = 'FF45:1::1'
mld_intf1.add_groups(join_group)
mld_intf1.add_groups(static_group)
# Build interface config for none-default vrfs
intf_cfgs = intf1_obj.build_config(apply=False)
self.assertMultiLineEqual(
str(intf_cfgs), '\n'.join([
'interface GigabitEthernet2',
' vrf forwarding VRF1',
' exit',
]))
intf_cfgs = intf2_obj.build_config(apply=False)
self.assertMultiLineEqual(
str(intf_cfgs), '\n'.join([
'interface GigabitEthernet1',
' ipv6 address 2001:db8:1:1::1/64',
' exit',
]))
# Build mld configuration
cfgs = self.mld.build_config(apply=False)
# Check config built correctly
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'ipv6 mld state-limit 63999',
'ipv6 mld ssm-map enable',
'ipv6 mld ssm-map static test 2001:DB8:1:1::1',
'interface GigabitEthernet1',
' ipv6 mld router',
' ipv6 mld join-group FF15:1::1 2001:DB8:2:2::2',
' ipv6 mld static-group FF45:1::1',
' exit',
'ipv6 mld vrf VRF1 state-limit 63999',
'ipv6 mld vrf VRF1 ssm-map enable',
'ipv6 mld vrf VRF1 ssm-map static test 2001:DB8:1:1::1',
'interface GigabitEthernet2',
' ipv6 mld router',
' ipv6 mld access-group test2',
' ipv6 mld limit 6400',
' ipv6 mld query-interval 366',
' ipv6 mld query-max-response-time 16',
' ipv6 mld join-group FF15:1::1 2001:DB8:2:2::2',
' ipv6 mld join-group FF25:2::1',
' ipv6 mld static-group FF35:1::1 2001:DB8:3:3::3',
' ipv6 mld static-group FF45:1::1',
' exit',
]))
# Build unconfig
cfgs = self.mld.build_unconfig(apply=False)
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'no ipv6 mld state-limit 63999',
'no ipv6 mld ssm-map enable',
'no ipv6 mld ssm-map static test 2001:DB8:1:1::1',
'interface GigabitEthernet1',
' no ipv6 mld router',
' no ipv6 mld join-group FF15:1::1 2001:DB8:2:2::2',
' no ipv6 mld static-group FF45:1::1',
' exit',
'no ipv6 mld vrf VRF1 state-limit 63999',
'no ipv6 mld vrf VRF1 ssm-map enable',
'no ipv6 mld vrf VRF1 ssm-map static test 2001:DB8:1:1::1',
'interface GigabitEthernet2',
' no ipv6 mld router',
' no ipv6 mld access-group test2',
' no ipv6 mld limit 6400',
' no ipv6 mld query-interval 366',
' no ipv6 mld query-max-response-time 16',
' no ipv6 mld join-group FF15:1::1 2001:DB8:2:2::2',
' no ipv6 mld join-group FF25:2::1',
' no ipv6 mld static-group FF35:1::1 2001:DB8:3:3::3',
' no ipv6 mld static-group FF45:1::1',
' exit',
]))
# Build unconfig with attribute
cfgs = self.mld.build_unconfig(
apply=False,
attributes={
'device_attr': {
self.dev1: {
'vrf_attr': {
vrf1: {
'global_max_groups': None,
'ssm': {
ssm1: None
}
},
vrf2: {
'interface_attr': {
'GigabitEthernet1': {
'enable': True
}
}
}
}
}
}
})
# Check config correctly unconfigured
self.assertMultiLineEqual(
str(cfgs[self.dev1.name]), '\n'.join([
'interface GigabitEthernet1',
' no ipv6 mld router',
' exit',
'no ipv6 mld vrf VRF1 state-limit 63999',
'no ipv6 mld vrf VRF1 ssm-map enable',
'no ipv6 mld vrf VRF1 ssm-map static test 2001:DB8:1:1::1',
]))
