def test_n_m_requests(setup, equipment, n, m, final_n, final_m,
blocking_reason, request_set):
""" test that various N and M values for a request end up with the correct path assgnment
"""
network, oms_list = setup
# add an occupation on one of the span of the expected path OMS list on both directions
# as defined by its offsets within the OMS list: [17, 20, 13, 22] and reversed path [19, 16, 21, 26]
expected_path = [17, 20, 13, 22]
expected_oms = [13, 16, 17, 19, 20, 21, 22, 26]
some_oms = oms_list[expected_oms[3]]
some_oms.assign_spectrum(
-30, 32
) # means that spectrum is occupied from indexes -62 to 1 on reversed path
params = request_set
params['effective_freq_slot'] = {'N': n, 'M': m}
rqs = [PathRequest(**params)]
paths = compute_path_dsjctn(network, equipment, rqs, [])
# check that the computed path is the expected one (independant of blocking issues due to spectrum)
path_oms = list(
set([
e.oms_id for e in paths[0]
if not isinstance(e, (Transceiver, Roadm))
]))
assert path_oms == expected_path
# function to be tested:
pth_assign_spectrum(paths, rqs, oms_list, [find_reversed_path(paths[0])])
# check that spectrum is correctly assigned
assert rqs[0].N == final_n
assert rqs[0].M == final_m
assert getattr(rqs[0], 'blocking_reason', None) == blocking_reason
def create_rq(equipment,
srce,
dest,
bdir,
node_list,
loose_list,
rqid='test_request'):
''' create the usual request list according to parameters
'''
requests_list = []
params = {
'request_id': rqid,
'source': srce,
'bidir': bdir,
'destination': dest,
'trx_type': 'Voyager',
'trx_mode': 'mode 1',
'spacing': 50000000000.0,
'nodes_list': node_list,
'loose_list': loose_list,
'path_bandwidth': 100.0e9,
'power': 1.0,
'effective_freq_slot': None,
}
params['format'] = params['trx_mode']
trx_params = trx_mode_params(equipment, params['trx_type'],
params['trx_mode'], True)
params.update(trx_params)
f_min = params['f_min']
f_max_from_si = params['f_max']
params['nb_channel'] = automatic_nch(f_min, f_max_from_si,
params['spacing'])
requests_list.append(PathRequest(**params))
return requests_list
def requests_from_json(json_data, equipment):
"""Extract list of requests from data parsed from JSON"""
requests_list = []
for req in json_data['path-request']:
# init all params from request
params = {}
params['request_id'] = req['request-id']
params['source'] = req['source']
params['bidir'] = req['bidirectional']
params['destination'] = req['destination']
params['trx_type'] = req['path-constraints']['te-bandwidth']['trx_type']
params['trx_mode'] = req['path-constraints']['te-bandwidth']['trx_mode']
params['format'] = params['trx_mode']
params['spacing'] = req['path-constraints']['te-bandwidth']['spacing']
try:
nd_list = req['explicit-route-objects']['route-object-include-exclude']
except KeyError:
nd_list = []
params['nodes_list'] = [n['num-unnum-hop']['node-id'] for n in nd_list]
params['loose_list'] = [n['num-unnum-hop']['hop-type'] for n in nd_list]
# recover trx physical param (baudrate, ...) from type and mode
# in trx_mode_params optical power is read from equipment['SI']['default'] and
# nb_channel is computed based on min max frequency and spacing
trx_params = trx_mode_params(equipment, params['trx_type'], params['trx_mode'], True)
params.update(trx_params)
# print(trx_params['min_spacing'])
# optical power might be set differently in the request. if it is indicated then the
# params['power'] is updated
try:
if req['path-constraints']['te-bandwidth']['output-power']:
params['power'] = req['path-constraints']['te-bandwidth']['output-power']
except KeyError:
pass
# same process for nb-channel
f_min = params['f_min']
f_max_from_si = params['f_max']
try:
if req['path-constraints']['te-bandwidth']['max-nb-of-channel'] is not None:
nch = req['path-constraints']['te-bandwidth']['max-nb-of-channel']
params['nb_channel'] = nch
spacing = params['spacing']
params['f_max'] = automatic_fmax(f_min, spacing, nch)
else:
params['nb_channel'] = automatic_nch(f_min, f_max_from_si, params['spacing'])
except KeyError:
params['nb_channel'] = automatic_nch(f_min, f_max_from_si, params['spacing'])
_check_one_request(params, f_max_from_si)
try:
params['path_bandwidth'] = req['path-constraints']['te-bandwidth']['path_bandwidth']
except KeyError:
pass
requests_list.append(PathRequest(**params))
return requests_list
def test_freq_slot_exist(setup, equipment, request_set):
""" test that assignment works even if effective_freq_slot is not populated
"""
network, oms_list = setup
params = request_set
params['effective_freq_slot'] = None
rqs = [PathRequest(**params)]
paths = compute_path_dsjctn(network, equipment, rqs, [])
pth_assign_spectrum(paths, rqs, oms_list, [find_reversed_path(paths[0])])
assert rqs[0].N == -256
assert rqs[0].M == 32
def test_inconsistant_freq_slot(setup, equipment, request_set):
""" test that an inconsistant M correctly raises an error
"""
network, oms_list = setup
params = request_set
# minimum required nb of slots is 32 (800Gbit/100Gbit/s channels each occupying 50GHz ie 4 slots)
params['effective_freq_slot'] = {'N': 0, 'M': 4}
with pytest.raises(ServiceError):
_check_one_request(params, 196.05e12)
params['trx_mode'] = None
rqs = [PathRequest(**params)]
paths = compute_path_dsjctn(network, equipment, rqs, [])
pth_assign_spectrum(paths, rqs, oms_list, [find_reversed_path(paths[0])])
assert rqs[0].blocking_reason == 'NOT_ENOUGH_RESERVED_SPECTRUM'
def create_rq(equipment, srce, dest, bdir, nd_list, ls_list):
""" create the usual request list according to parameters
"""
requests_list = []
params = {}
params['request_id'] = 'test_request'
params['source'] = srce
params['bidir'] = bdir
params['destination'] = dest
params['trx_type'] = 'Voyager'
params['trx_mode'] = 'mode 1'
params['format'] = params['trx_mode']
params['spacing'] = 50000000000.0
params['nodes_list'] = nd_list
params['loose_list'] = ls_list
trx_params = trx_mode_params(equipment, params['trx_type'], params['trx_mode'], True)
params.update(trx_params)
params['power'] = 1.0
f_min = params['f_min']
f_max_from_si = params['f_max']
params['nb_channel'] = automatic_nch(f_min, f_max_from_si, params['spacing'])
params['path_bandwidth'] = 100000000000.0
requests_list.append(PathRequest(**params))
return requests_list
def test_excel_ila_constraints(source, destination, route_list, hoptype,
expected_correction):
""" add different kind of constraints to test all correct_route cases
"""
service_xls_input = DATA_DIR / 'testTopology.xls'
network_json_input = DATA_DIR / 'testTopology_auto_design_expected.json'
equipment = load_equipment(eqpt_filename)
network = load_network(network_json_input, equipment)
# increase length of one span to trigger automatic fiber splitting included by autodesign
# so that the test also covers this case
next(node for node in network.nodes()
if node.uid == 'fiber (Brest_KLA → Quimper)-').length = 200000
next(node for node in network.nodes()
if node.uid == 'fiber (Quimper → Brest_KLA)-').length = 200000
default_si = equipment['SI']['default']
p_db = default_si.power_dbm
p_total_db = p_db + lin2db(
automatic_nch(default_si.f_min, default_si.f_max, default_si.spacing))
build_network(network, equipment, p_db, p_total_db)
# create params for a request based on input
nodes_list = route_list.split(' | ') if route_list is not None else []
params = {
'request_id':
'0',
'source':
source,
'bidir':
False,
'destination':
destination,
'trx_type':
'',
'trx_mode':
'',
'format':
'',
'spacing':
'',
'nodes_list':
nodes_list,
'loose_list':
[hoptype for node in nodes_list] if route_list is not None else '',
'f_min':
0,
'f_max':
0,
'baud_rate':
0,
'OSNR':
None,
'bit_rate':
None,
'cost':
None,
'roll_off':
0,
'tx_osnr':
0,
'min_spacing':
None,
'nb_channel':
0,
'power':
0,
'path_bandwidth':
0,
}
request = PathRequest(**params)
if expected_correction != 'Fail':
[request] = correct_xls_route_list(service_xls_input, network,
[request])
assert request.nodes_list == expected_correction
else:
with pytest.raises(ServiceError):
[request] = correct_xls_route_list(service_xls_input, network,
[request])
def transmission_main_example(args=None):
parser = argparse.ArgumentParser(
description=
'Send a full spectrum load through the network from point A to point B',
epilog=_help_footer,
formatter_class=argparse.ArgumentDefaultsHelpFormatter,
)
_add_common_options(parser,
network_default=_examples_dir /
'edfa_example_network.json')
parser.add_argument('--show-channels',
action='store_true',
help='Show final per-channel OSNR summary')
parser.add_argument('-pl', '--plot', action='store_true')
parser.add_argument('-l',
'--list-nodes',
action='store_true',
help='list all transceiver nodes')
parser.add_argument('-po',
'--power',
default=0,
help='channel ref power in dBm')
parser.add_argument('source', nargs='?', help='source node')
parser.add_argument('destination', nargs='?', help='destination node')
args = parser.parse_args(args if args is not None else sys.argv[1:])
_setup_logging(args)
(equipment,
network) = load_common_data(args.equipment, args.topology,
args.sim_params,
args.save_network_before_autodesign)
if args.plot:
plot_baseline(network)
transceivers = {
n.uid: n
for n in network.nodes() if isinstance(n, Transceiver)
}
if not transceivers:
sys.exit('Network has no transceivers!')
if len(transceivers) < 2:
sys.exit('Network has only one transceiver!')
if args.list_nodes:
for uid in transceivers:
print(uid)
sys.exit()
# First try to find exact match if source/destination provided
if args.source:
source = transceivers.pop(args.source, None)
valid_source = True if source else False
else:
source = None
_logger.info('No source node specified: picking random transceiver')
if args.destination:
destination = transceivers.pop(args.destination, None)
valid_destination = True if destination else False
else:
destination = None
_logger.info(
'No destination node specified: picking random transceiver')
# If no exact match try to find partial match
if args.source and not source:
# TODO code a more advanced regex to find nodes match
source = next(
(transceivers.pop(uid)
for uid in transceivers if args.source.lower() in uid.lower()),
None)
if args.destination and not destination:
# TODO code a more advanced regex to find nodes match
destination = next((transceivers.pop(uid) for uid in transceivers
if args.destination.lower() in uid.lower()), None)
# If no partial match or no source/destination provided pick random
if not source:
source = list(transceivers.values())[0]
del transceivers[source.uid]
if not destination:
destination = list(transceivers.values())[0]
_logger.info(f'source = {args.source!r}')
_logger.info(f'destination = {args.destination!r}')
params = {}
params['request_id'] = 0
params['trx_type'] = ''
params['trx_mode'] = ''
params['source'] = source.uid
params['destination'] = destination.uid
params['bidir'] = False
params['nodes_list'] = [destination.uid]
params['loose_list'] = ['strict']
params['format'] = ''
params['path_bandwidth'] = 0
trx_params = trx_mode_params(equipment)
# Randomly generate input power
input_power = round(random.random(), 2)
input_power = -2 + (input_power * (8))
args.power = input_power
if args.power:
trx_params['power'] = db2lin(float(args.power)) * 1e-3
params.update(trx_params)
req = PathRequest(**params)
power_mode = equipment['Span']['default'].power_mode
print('\n'.join([
f'Power mode is set to {power_mode}',
f'=> it can be modified in eqpt_config.json - Span'
]))
pref_ch_db = lin2db(req.power *
1e3) # reference channel power / span (SL=20dB)
pref_total_db = pref_ch_db + lin2db(
req.nb_channel) # reference total power / span (SL=20dB)
try:
build_network(network, equipment, pref_ch_db, pref_total_db)
except exceptions.NetworkTopologyError as e:
print(
f'{ansi_escapes.red}Invalid network definition:{ansi_escapes.reset} {e}'
)
sys.exit(1)
except exceptions.ConfigurationError as e:
print(
f'{ansi_escapes.red}Configuration error:{ansi_escapes.reset} {e}')
sys.exit(1)
path = compute_constrained_path(network, req)
spans = [
s.params.length for s in path
if isinstance(s, RamanFiber) or isinstance(s, Fiber)
]
print(
f'\nThere are {len(spans)} fiber spans over {sum(spans)/1000:.0f} km between {source.uid} '
f'and {destination.uid}')
print(f'\nNow propagating between {source.uid} and {destination.uid}:')
try:
p_start, p_stop, p_step = equipment['SI']['default'].power_range_db
p_num = abs(int(round(
(p_stop - p_start) / p_step))) + 1 if p_step != 0 else 1
power_range = list(linspace(p_start, p_stop, p_num))
except TypeError:
print(
'invalid power range definition in eqpt_config, should be power_range_db: [lower, upper, step]'
)
power_range = [0]
if not power_mode:
# power cannot be changed in gain mode
power_range = [0]
for dp_db in power_range:
req.power = db2lin(pref_ch_db + dp_db) * 1e-3
if power_mode:
print(
f'\nPropagating with input power = {ansi_escapes.cyan}{lin2db(req.power*1e3):.2f} dBm{ansi_escapes.reset}:'
)
else:
print(
f'\nPropagating in {ansi_escapes.cyan}gain mode{ansi_escapes.reset}: power cannot be set manually'
)
infos = propagate(path, req, equipment)
if len(power_range) == 1:
for elem in path:
print(elem)
if power_mode:
print(
f'\nTransmission result for input power = {lin2db(req.power*1e3):.2f} dBm:'
)
else:
print(f'\nTransmission results:')
# print('-------------')
# print(destination.snr_01nm)
# print('-------------')
print(
f' Final SNR total (0.1 nm): {ansi_escapes.cyan}{mean(destination.snr_01nm):.02f} dB{ansi_escapes.reset}'
)
else:
print(path[-1])
if args.save_network is not None:
save_network(network, args.save_network)
print(
f'{ansi_escapes.blue}Network (after autodesign) saved to {args.save_network}{ansi_escapes.reset}'
)
if args.show_channels:
print('\nThe total SNR per channel at the end of the line is:')
print('{:>5}{:>26}{:>26}{:>28}{:>28}{:>28}'.format(
'Ch. #', 'Channel frequency (THz)', 'Channel power (dBm)',
'OSNR ASE (signal bw, dB)', 'SNR NLI (signal bw, dB)',
'SNR total (signal bw, dB)'))
# print(dir(info))
for final_carrier, ch_osnr, ch_snr_nl, ch_snr in zip(
infos.carriers, path[-1].osnr_ase, path[-1].osnr_nli,
path[-1].snr):
ch_freq = final_carrier.frequency * 1e-12
ch_power = lin2db(final_carrier.power.signal * 1e3)
print('{:5}{:26.2f}{:26.2f}{:28.2f}{:28.2f}{:28.2f}'.format(
final_carrier.channel_number, round(ch_freq, 2),
round(ch_power, 2), round(ch_osnr, 2), round(ch_snr_nl, 2),
round(ch_snr, 2)))
if not args.source:
print(f'\n(No source node specified: picked {source.uid})')
elif not valid_source:
print(
f'\n(Invalid source node {args.source!r} replaced with {source.uid})'
)
if not args.destination:
print(f'\n(No destination node specified: picked {destination.uid})')
elif not valid_destination:
print(
f'\n(Invalid destination node {args.destination!r} replaced with {destination.uid})'
)
if args.plot:
plot_results(network, path, source, destination)
# MY ADDITION
# just to see what the different contributions of ASE and NLI are
# return input_power, path[-1].osnr_ase, path[-1].osnr_nli, path[-1].snr
# to test Raman
return input_power, destination.snr_01nm, mean(destination.snr_01nm)
def test_roadm_target_power(prev_node_type, effective_pch_out_db, power_dbm):
''' Check that egress power of roadm is equal to target power if input power is greater
than target power else, that it is equal to input power. Use a simple two hops A-B-C topology
for the test where the prev_node in ROADM B is either an amplifier or a fused, so that the target
power can not be met in this last case.
'''
equipment = load_equipment(EQPT_LIBRARY_NAME)
json_network = load_json(TEST_DIR / 'data/twohops_roadm_power_test.json')
prev_node = next(n for n in json_network['elements']
if n['uid'] == 'west edfa in node B to ila2')
json_network['elements'].remove(prev_node)
if prev_node_type == 'edfa':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Edfa'}
elif prev_node_type == 'fused':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Fused'}
prev_node['params'] = {'loss': 0}
json_network['elements'].append(prev_node)
network = network_from_json(json_network, equipment)
p_total_db = power_dbm + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, power_dbm, p_total_db)
params = {
'request_id': 0,
'trx_type': '',
'trx_mode': '',
'source': 'trx node A',
'destination': 'trx node C',
'bidir': False,
'nodes_list': ['trx node C'],
'loose_list': ['strict'],
'format': '',
'path_bandwidth': 100e9,
'effective_freq_slot': None,
}
trx_params = trx_mode_params(equipment)
params.update(trx_params)
req = PathRequest(**params)
req.power = db2lin(power_dbm - 30)
path = compute_constrained_path(network, req)
si = create_input_spectral_information(req.f_min, req.f_max, req.roll_off,
req.baud_rate, req.power,
req.spacing)
for i, el in enumerate(path):
if isinstance(el, Roadm):
carriers_power_in_roadm = min([
c.power.signal + c.power.nli + c.power.ase for c in si.carriers
])
si = el(si, degree=path[i + 1].uid)
if el.uid == 'roadm node B':
print('input', carriers_power_in_roadm)
# if previous was an EDFA, power level at ROADM input is enough for the ROADM to apply its
# target power (as specified in equipment ie -20 dBm)
# if it is a Fused, the input power to the ROADM is smaller than the target power, and the
# ROADM cannot apply this target. In this case, it is assumed that the ROADM has 0 dB loss
# so the output power will be the same as the input power, which for this particular case
# corresponds to -22dBm + power_dbm
# next step (for ROADM modelling) will be to apply a minimum loss for ROADMs !
if prev_node_type == 'edfa':
assert el.effective_pch_out_db == effective_pch_out_db
if prev_node_type == 'fused':
# then output power == input_power == effective_pch_out_db + power_dbm
assert effective_pch_out_db + power_dbm == \
pytest.approx(lin2db(carriers_power_in_roadm * 1e3), rel=1e-3)
assert el.effective_pch_out_db == effective_pch_out_db + power_dbm
for carrier in si.carriers:
print(carrier.power.signal + carrier.power.nli +
carrier.power.ase)
power = carrier.power.signal + carrier.power.nli + carrier.power.ase
if prev_node_type == 'edfa':
# edfa prev_node sets input power to roadm to a high enough value:
# Check that egress power of roadm is equal to target power
assert power == pytest.approx(
db2lin(effective_pch_out_db - 30), rel=1e-3)
elif prev_node_type == 'fused':
# fused prev_node does reamplfy power after fiber propagation, so input power
# to roadm is low.
# Check that egress power of roadm is equalized to the min carrier input power.
assert power == pytest.approx(carriers_power_in_roadm,
rel=1e-3)
else:
si = el(si)
def test_roadm_target_power(prev_node_type, effective_pch_out_db):
''' Check that egress power of roadm is equal to target power if input power is greater
than target power else, that it is equal to input power. Use a simple two hops A-B-C topology
for the test where the prev_node in ROADM B is either an amplifier or a fused, so that the target
power can not be met in this last case.
'''
equipment = load_equipment(EQPT_LIBRARY_NAME)
json_network = load_json(TEST_DIR / 'data/twohops_roadm_power_test.json')
prev_node = next(n for n in json_network['elements']
if n['uid'] == 'west edfa in node B to ila2')
json_network['elements'].remove(prev_node)
if prev_node_type == 'edfa':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Edfa'}
elif prev_node_type == 'fused':
prev_node = {'uid': 'west edfa in node B to ila2', 'type': 'Fused'}
prev_node['params'] = {'loss': 0}
json_network['elements'].append(prev_node)
network = network_from_json(json_network, equipment)
# Build the network once using the default power defined in SI in eqpt config
p_db = equipment['SI']['default'].power_dbm
p_total_db = p_db + lin2db(
automatic_nch(equipment['SI']['default'].f_min,
equipment['SI']['default'].f_max,
equipment['SI']['default'].spacing))
build_network(network, equipment, p_db, p_total_db)
params = {}
params['request_id'] = 0
params['trx_type'] = ''
params['trx_mode'] = ''
params['source'] = 'trx node A'
params['destination'] = 'trx node C'
params['bidir'] = False
params['nodes_list'] = ['trx node C']
params['loose_list'] = ['strict']
params['format'] = ''
params['path_bandwidth'] = 100e9
trx_params = trx_mode_params(equipment)
params.update(trx_params)
req = PathRequest(**params)
path = compute_constrained_path(network, req)
si = create_input_spectral_information(req.f_min, req.f_max, req.roll_off,
req.baud_rate, req.power,
req.spacing)
for i, el in enumerate(path):
if isinstance(el, Roadm):
carriers_power_in_roadm = min([
c.power.signal + c.power.nli + c.power.ase for c in si.carriers
])
si = el(si, degree=path[i + 1].uid)
if el.uid == 'roadm node B':
print('input', carriers_power_in_roadm)
assert el.effective_pch_out_db == effective_pch_out_db
for carrier in si.carriers:
print(carrier.power.signal + carrier.power.nli +
carrier.power.ase)
power = carrier.power.signal + carrier.power.nli + carrier.power.ase
if prev_node_type == 'edfa':
# edfa prev_node sets input power to roadm to a high enough value:
# Check that egress power of roadm is equal to target power
assert power == pytest.approx(
db2lin(effective_pch_out_db - 30), rel=1e-3)
elif prev_node_type == 'fused':
# fused prev_node does reamplfy power after fiber propagation, so input power
# to roadm is low.
# Check that egress power of roadm is equalized to the min carrier input power.
assert power == pytest.approx(carriers_power_in_roadm,
rel=1e-3)
else:
si = el(si)
