def openDoor():
gpio.setup(62, 'out')
gpio.setwarnings(False)
print 'Set gpio62 as 1\n'
gpio.set(62, 1)
time.sleep(1)
gpio.set(62, 0)
def run():
global mgui
mgui = GUI.MainGUI(data_model)
data_model.append(dataobject.DataObject(1, 1))
modules.append(api_sl.SL_APIrequester(data_model[0]))
data_model.append(dataobject.DataObject(2, 0))
modules.append(api_kth.KTH_APIrequester(data_model[1]))
data_model.append(dataobject.DataObject(2, 1))
modules.append(api_smhi.SMHI_APIrequester(data_model[2]))
#request data from each active API module
for i in range(0, len(modules)):
modules[i].request()
threads.append(threading.Thread(target=modules[i].run))
threads[i].setDaemon(True)
threads[i].start()
gpio.set(modules)
PIRthread = threading.Thread(target=gpio.run)
PIRthread.setDaemon(True)
PIRthread.start()
mgui.start()
def init():
gpio.export(SELECT_GPIO)
gpio.export(ENABLE_GPIO)
gpio.set_dir(SELECT_GPIO, "out")
gpio.set_dir(ENABLE_GPIO, "out")
gpio.set(SELECT_GPIO, 0)
gpio.set(ENABLE_GPIO, 1)
def _set_state(self, name, state):
g = self.gpios[name]
gpio_num = g["num"]
if not g["exported"]:
gpio.setup(gpio_num, gpio.OUT)
g["exported"] = True
g["state"] = state
gpio.set(gpio_num, state)
def toggle(self): if gpio.read(57) == 0: gpio.set(57, 1) elif gpio.read(57) == 1: gpio.set(57, 0) else: pass
def dcdc_off_on():
global dcdc_exported
if not dcdc_exported:
#DC-DC GPIO not yet set up
gpio.setup(dcdc_gpio, gpio.OUT)
dcdc_exported = True
gpio.set(dcdc_gpio, True)
sleep(0.5)
gpio.set(dcdc_gpio, False)
def gpio_setup(self):
"""This sets the GPIO registers up"""
for key, val in self.status_register.items():
gpio.setup(val, "in")
for key, val in self.reset_register.items():
gpio.setup(val, "out")
for key, val in self.control_register.items():
gpio.setup(val, "out")
gpio.set(val, self.control_register_local[key])
def reset(self):
#self.RST = m.Gpio(36)
#self.RST.dir(m.DIR_OUT)
#self.RST.write(0) # reset the device
gpio.setup(GPIO_RESET_PIN, gpio.OUT)
gpio.set(GPIO_RESET_PIN, 0)
time.sleep(0.01)
gpio.set(GPIO_RESET_PIN, 1)
#self.RST.write(1) # let the device out of reset
time.sleep(2.01) # wait for the CC1110 to come up
def toggle(pin):
if gpio.read(pin) == 0:
gpio.setup(pin, gpio.OUT)
gpio.set(pin, 1)
elif gpio.read(pin) == 1:
gpio.setup(pin, gpio.OUT)
gpio.set(pin, 0)
else:
print('There was some sort of error, are you using the right pin?')
print(gpio.read(pin))
def set_state(self, state):
if not self.gpio_exported:
gpio.setup(self.gpio_num, gpio.OUT)
self.gpio_exported = True
self.gpio_state = state
if self.switch_types[self.hw_v] == "gpio_inverted":
gpio.set(self.gpio_num, not state)
elif self.switch_types[self.hw_v] == "gpio":
gpio.set(self.gpio_num, state)
else:
raise NotImplementedException("DC-DC switch type not supported!")
def test_basic(self):
# with mock_open you have to remember that all files are the same
# mock object.
mopen = mock_open(read_data='0')
with patch(bins + '.open', mopen, create=True) as m:
gpio.setup(0, gpio.OUT)
gpio.set(0, 0)
assertInitialized(self, m)
# So, "value" could be "direction" or any other file
written = mockargs(gpio._open[0]['value'].write)
expected = [('0',), ('out',), ('0',)]
assertInitialized(self, m)
self.assertListEqual(written, expected)
def test_basic(self):
# with mock_open you have to remember that all files are the same
# mock object.
mopen = mock_open(read_data='0')
with patch(bins + '.open', mopen, create=True) as m:
gpio.setup(0, gpio.OUT)
gpio.set(0, 0)
assertInitialized(self, m)
# So, "value" could be "direction" or any other file
written = mockargs(gpio._open[0]['value'].write)
expected = [('0',), ('out',), ('0',)]
assertInitialized(self, m)
self.assertListEqual(written, expected)
def set_rgb(self, *colors):
if len(colors) != 3 or any([type(color)!=int for color in colors]):
raise TypeError("set_rgb expects three integer arguments - red, green and blue values!")
if any([color<0 or color>255 for color in colors]):
raise ValueError("set_rgb expects integers in range from 0 to 255!")
if self.led_type in ["gpio", "gpio_inverted"]: #HW versions that have GPIO-controlled LED
gpios = self.get_rgb_gpios()
for i, gpio_num in enumerate(gpios):
gpio_state = colors[i]>0 #Only 0 and 255 are respected
if self.led_type == "gpio_inverted": gpio_state = not gpio_state
gpio.set(gpio_num, gpio_state)
else:
raise NotImplementedException("LED control type not supported!")
def updateIndicators(stop_event):
blinker = 0
while not stop_event.wait(0.1):
v = read(button_switch)
#print "button-switch", v
if v: ##disabled the blinker## and blinker<15:
set(led_red, 0)
else:
set(led_red, 1)
blinker = blinker + 1
if blinker >= 20:
blinker = 0
print 'updateIndicators thread has terminated.'
def get_gsm_reset_gpio():
hw_revs = [["Gamma", "gamma"], ["Delta/Delta-B", "delta"]]
gpios = {"gamma":502, "delta":496}
assert(all([hwr[1] in gpios.keys() for hwr in hw_revs])) # check after editing
hwr = Listbox(hw_revs, i, o, name="Hardware setup app GSM FW picker").activate()
if not hwr:
return None
if hwr == "delta":
# Enable UARTs
gpio.setup(500, gpio.OUT)
gpio.set(500, False)
gp = gpios[hwr]
return gp
def gpioread():
keys = []
for writeport in range(80, 87):
if writeport == 86:
writeport = 136
gpio.set(writeport, 1)
time.sleep(0.002)
key = 0
for readport in range(135, 127, -1):
key = (key << 1) + gpio.read(readport)
key = ~((key ^ (key >> 1)) & 0x1f ^ (key >> 1)) & 0x7f
keys.append(key)
gpio.set(writeport, 0)
return keys
def set_rgb(self, *colors):
"""Sets the color of the led from RGB values [0-255] range"""
colors = [int(c) for c in colors]
if len(colors) != 3 or any([type(color) != int for color in colors]):
raise TypeError(
"set_rgb expects three integer arguments - red, green and blue values!"
)
if any([color < 0 or color > 255 for color in colors]):
raise ValueError(
"set_rgb expects integers in range from 0 to 255!")
gpios = self._get_rgb_gpios()
for i, gpio_num in enumerate(gpios):
gpio_state = colors[i] < 255 # Only 0 and 255 are respected
gpio.set(gpio_num, gpio_state)
def writeCommandToModbus(self, data):
# delay
time.sleep(.02)
ser = self.serial
dataList = getCRC16(data)
# write
GPIO.set(self.tr, 0)
ser.write(dataList)
ser.flush()
# read
GPIO.set(self.tr, 1)
# the first three numbers for the fixed code, the last two numbers CRC code
words = dataList[5] # words length
length = 3 + words * 2 + 2
response = ser.read(length) # send command to meter and get response
# Convert hex string to array
response = array.array('B', response)
return response
def run(self, recording_length=-1):
# recording_length: time (in sec) to spend recording data.
# -1: record for indefinite amount of time, until terminated by pressing 'q' or powering off the system
# initialize video capture
cap = cv2.VideoCapture(0)
data = []
recording_start = datetime.datetime.now()
prevTime = datetime.datetime.now()
timeLastUsed = datetime.datetime.now()
finished = False
alarm_signal = 0
#gpio stuff
gpio.setup(57, gpio.OUT)
gpio.set(57, 0)
i = 0
#aruco stuff
square_length = 6.35
markerLength = 5.08
dictionary = cv2.aruco.Dictionary_get(aruco.DICT_6X6_250) #AR tag dictionary
board = cv2.aruco.CharucoBoard_create(4,2,square_length,markerLength,dictionary)
while not finished:
#show video with alarm state
ret, frame = cap.read()
gray = cv2.cvtColor(frame, cv2.COLOR_BGR2GRAY)
res = cv2.aruco.detectMarkers(gray,dictionary) #output: corners, ids,rejected imgpts
cv2.aruco.drawDetectedMarkers(gray,res[0],res[1])
cv2.putText(frame, "Alarm is %s" %alarm_signal, (10,100), cv2.FONT_HERSHEY_COMPLEX_SMALL, 1, (255,0,0))
cv2.imshow('frame',gray)
i += 1
def focusAuto(self):
self.contour = True
self.focus_in.setEnabled(False)
self.focus_out.setEnabled(False)
self.focus_auto.setEnabled(False)
gpio.set(self.focuserRUN, 0)
gpio.set(self.focuserIN, 0)
gpio.set(self.focuserOUT, 0)
tr = threading.Thread(target=self.autoFocus)
tr.start()
def read(): # Send a reset signal gpio.set(24, 1) gpio.set(23, 1) gpio.set(23, 0) gpio.set(24, 0) l = [] r = [] for i in range(7): gpio.set(23, 1) gpio.set(23, 0) l.append(adc.read(2)) r.append(adc.read(3)) return [l, r]
def V7_INIT_B_set(self, value):
gpio.set(self.reset_register.get("V7_INIT_B"), value)
import gpio
import time
for i in range(10, 14):
gpio.setup(i, 'out')
for i in range(0, 100):
for i in range(10, 14):
gpio.set(i, 1)
time.sleep(0.3)
for i in range(10, 14):
gpio.set(i, 0)
time.sleep(0.3)
def LPMODE1_set(self, value):
self.control_register_local["LPMODE1"]=value
gpio.set(self.control_register.get("LPMODE1"), value)
def rgb_reset(): buf = [] for i in range(rgb_clear_count): buf.append(0) gpio.set(25, 1) spi.xfer2(buf, speed, 500, bpw)
def led_send(values): gpio.set(25, 0) spi.xfer2(values, speed, 500, bpw)
def V7_PRG_ZY_set(self, value):
gpio.set(self.reset_register.get("V7_PRG_ZY"), value)
def rgb_send(values): gpio.set(25, 1) spi.xfer2(values, speed, 500, bpw) rgb_reset()
def MODPRSL1_set(self, value):
self.control_register_local["MODPRSL1"]=value
gpio.set(self.control_register.get("MODPRSL1"), value)
def RESETL1_set(self, value):
gpio.set(self.reset_register.get("RESETL1"), value)
def ZYNC_FW_RST_N_set(self, value):
gpio.set(self.reset_register.get("ZYNC_FW_RST_N"), value)
def set_flash(self, value):
if value == 1:
gpio.set(self.control_register.get("FSEL_1_DE"), 0)
self.control_register_local["FSEL_1_DE"] = 0
gpio.set(self.control_register.get("FSEL_0_DE"), 0)
self.control_register_local["FSEL_0_DE"] = 0
self.selected_flash = value
if value == 2:
gpio.set(self.control_register.get("FSEL_1_DE"), 0)
self.control_register_local["FSEL_1_DE"] = 0
gpio.set(self.control_register.get("FSEL_0_DE"), 1)
self.control_register_local["FSEL_0_DE"] = 1
self.selected_flash = value
if value == 3:
gpio.set(self.control_register.get("FSEL_1_DE"), 1)
self.control_register_local["FSEL_1_DE"] = 1
gpio.set(self.control_register.get("FSEL_0_DE"), 0)
self.control_register_local["FSEL_0_DE"] = 0
self.selected_flash = value
if value == 4:
gpio.set(self.control_register.get("FSEL_1_DE"), 1)
self.control_register_local["FSEL_1_DE"] = 1
gpio.set(self.control_register.get("FSEL_0_DE"), 1)
self.control_register_local["FSEL_0_DE"] = 1
self.selected_flash = value
else:
print("Not a valid number, no change!")
def P1V0_EN_ZYNC_set(self, value):
self.control_register_local["P1V0_EN_ZYNC"]=value
gpio.set(self.control_register.get("P1V0_EN_ZYNC"), value)
def dcdc_off():
global dcdc_exported
if not dcdc_exported:
gpio.setup(dcdc_gpio, gpio.OUT)
dcdc_exported = True
gpio.set(dcdc_gpio, True)
def QSFP_I2C_SEL0_set(self, value):
self.control_register_local["QSFP_I2C_SEL0"]=value
gpio.set(self.control_register.get("QSFP_I2C_SEL0"), value)
