def open(
self,
mode=None,
layer=1,
overwrite=None,
with_z=None,
# parameters valid only if mode == 'w'
tab_name='',
tab_cols=None,
link_name=None,
link_key='cat',
link_db='$GISDBASE/$LOCATION_NAME/$MAPSET/sqlite/sqlite.db',
link_driver='sqlite'):
"""Open a Vector map.
:param mode: open a vector map in ``r`` in reading, ``w`` in writing
and in ``rw`` read and write mode
:type mode: str
:param layer: specify the layer that you want to use
:type layer: int
:param overwrite: valid only for ``w`` mode
:type overwrite: bool
:param with_z: specify if vector map must be open with third dimension
enabled or not. Valid only for ``w`` mode,
default: False
:type with_z: bool
:param tab_name: define the name of the table that will be generate
:type tab_name: str
:param tab_cols: define the name and type of the columns of the
attribute table of the vecto map
:type tab_cols: list of pairs
:param link_name: define the name of the link connecttion with the
database
:type link_name: str
:param link_key: define the nema of the column that will be use as
vector category
:type link_key: str
:param link_db: define the database connection parameters
:type link_db: str
:param link_driver: define witch database driver will be used
:param link_driver: str
Some of the parameters are valid only with mode ``w`` or ``rw``
See more examples in the documentation of the ``read`` and ``write``
methods
"""
with_z = libvect.WITH_Z if with_z else libvect.WITHOUT_Z
# check if map exists or not
if not self.exist() and mode != 'w':
raise OpenError("Map <%s> not found." % self._name)
if libvect.Vect_set_open_level(self._topo_level) != 0:
raise OpenError("Invalid access level.")
# update the overwrite attribute
self.overwrite = overwrite if overwrite is not None else self.overwrite
# check if the mode is valid
if mode not in ('r', 'rw', 'w'):
raise ValueError("Mode not supported. Use one of: 'r', 'rw', 'w'.")
# check if the map exist
if self.exist() and mode in ('r', 'rw'):
# open in READ mode
if mode == 'r':
openvect = libvect.Vect_open_old2(self.c_mapinfo, self.name,
self.mapset, str(layer))
# open in READ and WRITE mode
elif mode == 'rw':
openvect = libvect.Vect_open_update2(self.c_mapinfo, self.name,
self.mapset, str(layer))
# instantiate class attributes
self.dblinks = DBlinks(self.c_mapinfo)
# If it is opened in write mode
if mode == 'w':
openvect = libvect.Vect_open_new(self.c_mapinfo, self.name, with_z)
self.dblinks = DBlinks(self.c_mapinfo)
if tab_cols:
# create a link
link = Link(layer, link_name if link_name else self.name,
tab_name if tab_name else self.name, link_key,
link_db, link_driver)
# add the new link
self.dblinks.add(link)
# create the table
table = link.table()
table.create(tab_cols)
table.conn.commit()
# check the C function result.
if openvect == -1:
str_err = "Not able to open the map, C function return %d."
raise OpenError(str_err % openvect)
if len(self.dblinks) == 0:
self.layer = layer
self.table = None
self.n_lines = 0
else:
self.layer = self.dblinks.by_layer(layer).layer
self.table = self.dblinks.by_layer(layer).table()
self.n_lines = self.table.n_rows()
self.writable = self.mapset == functions.getenv("MAPSET")
self.find = {
'by_point': PointFinder(self.c_mapinfo, self.table, self.writable),
'by_box': BboxFinder(self.c_mapinfo, self.table, self.writable),
'by_polygon': PolygonFinder(self.c_mapinfo, self.table,
self.writable),
}
def open(
self,
mode=None,
layer=1,
overwrite=None,
with_z=None,
# parameters valid only if mode == 'w'
tab_name="",
tab_cols=None,
link_name=None,
link_key="cat",
link_db="$GISDBASE/$LOCATION_NAME/$MAPSET/sqlite/sqlite.db",
link_driver="sqlite",
):
"""Open a Vector map.
:param mode: open a vector map in ``r`` in reading, ``w`` in writing
and in ``rw`` read and write mode
:type mode: str
:param layer: specify the layer that you want to use
:type layer: int
:param overwrite: valid only for ``w`` mode
:type overwrite: bool
:param with_z: specify if vector map must be open with third dimension
enabled or not. Valid only for ``w`` mode,
default: False
:type with_z: bool
:param tab_name: define the name of the table that will be generate
:type tab_name: str
:param tab_cols: define the name and type of the columns of the
attribute table of the vecto map
:type tab_cols: list of pairs
:param link_name: define the name of the link connecttion with the
database
:type link_name: str
:param link_key: define the nema of the column that will be use as
vector category
:type link_key: str
:param link_db: define the database connection parameters
:type link_db: str
:param link_driver: define witch database driver will be used
:param link_driver: str
Some of the parameters are valid only with mode ``w`` or ``rw``
See more examples in the documentation of the ``read`` and ``write``
methods
"""
self.mode = mode if mode else self.mode
with_z = libvect.WITH_Z if with_z else libvect.WITHOUT_Z
# check if map exists or not
if not self.exist() and self.mode != "w":
raise OpenError("Map <%s> not found." % self._name)
if libvect.Vect_set_open_level(self._topo_level) != 0:
raise OpenError("Invalid access level.")
# update the overwrite attribute
self.overwrite = overwrite if overwrite is not None else self.overwrite
# check if the mode is valid
if self.mode not in ("r", "rw", "w"):
raise ValueError("Mode not supported. Use one of: 'r', 'rw', 'w'.")
# check if the map exist
if self.exist() and self.mode in ("r", "rw"):
# open in READ mode
if self.mode == "r":
openvect = libvect.Vect_open_old2(self.c_mapinfo, self.name,
self.mapset, str(layer))
# open in READ and WRITE mode
elif self.mode == "rw":
openvect = libvect.Vect_open_update2(self.c_mapinfo, self.name,
self.mapset, str(layer))
# instantiate class attributes
self.dblinks = DBlinks(self.c_mapinfo)
# If it is opened in write mode
if self.mode == "w":
openvect = libvect.Vect_open_new(self.c_mapinfo, self.name, with_z)
self.dblinks = DBlinks(self.c_mapinfo)
if self.mode in ("w", "rw") and tab_cols:
# create a link
link = Link(
layer,
link_name if link_name else self.name,
tab_name if tab_name else self.name,
link_key,
link_db,
link_driver,
)
# add the new link
self.dblinks.add(link)
# create the table
table = link.table()
table.create(tab_cols, overwrite=overwrite)
table.conn.commit()
# check the C function result.
if openvect == -1:
str_err = "Not able to open the map, C function return %d."
raise OpenError(str_err % openvect)
# Load attribute table for selected layer.
if len(self.dblinks) == 0:
self.layer = layer
self.table = None
self.n_lines = 0
else:
layer_db_link = self.dblinks.by_layer(layer)
if not layer_db_link:
raise LookupError(
"There appears to be no database link for layer %d of <%s>."
% (layer, self.name))
if layer_db_link.layer != layer:
raise RuntimeError(
"The databse link for layer %d of <%s> references layer %d."
% (layer, self.name, layer_db_link.layer))
self.layer = layer
try:
self.table = layer_db_link.table()
except Exception as error:
raise RuntimeError(
"Loading the attribute table for layer %d of <%s> failed."
% (layer, self.name)) from error
self.n_lines = self.table.n_rows()
self.writeable = self.mapset == utils.getenv("MAPSET")
# Initialize the finder
self.find = {
"by_point":
PointFinder(self.c_mapinfo, self.table, self.writeable),
"by_bbox":
BboxFinder(self.c_mapinfo, self.table, self.writeable),
"by_polygon":
PolygonFinder(self.c_mapinfo, self.table, self.writeable),
}
self.find_by_point = self.find["by_point"]
self.find_by_bbox = self.find["by_bbox"]
self.find_by_polygon = self.find["by_polygon"]
