def subcmd_status(args):
from gsyncdstatus import GeorepStatus
master_name = args.master.replace(":", "")
slave_data = args.slave.replace("ssh://", "")
brick_status = GeorepStatus(gconf.get("state-file"), "", args.local_path,
"", master_name, slave_data,
gconf.get("pid-file"))
checkpoint_time = gconf.get("checkpoint", 0)
brick_status.print_status(checkpoint_time=checkpoint_time,
json_output=args.json)
def subcmd_status(args):
from gsyncdstatus import GeorepStatus
master_name = args.master.replace(":", "")
slave_data = args.slave.replace("ssh://", "")
brick_status = GeorepStatus(gconf.get("state-file"),
"",
args.local_path,
"",
master_name,
slave_data,
gconf.get("pid-file"))
checkpoint_time = gconf.get("checkpoint", 0)
brick_status.print_status(checkpoint_time=checkpoint_time,
json_output=args.json)
def monitor(self, w, argv, cpids, agents, slave_vol, slave_host, master,
suuid, slavenodes):
"""the monitor loop
Basic logic is a blantantly simple blunt heuristics:
if spawned client survives 60 secs, it's considered OK.
This servers us pretty well as it's not vulneralbe to
any kind of irregular behavior of the child...
... well, except for one: if children is hung up on
waiting for some event, it can survive aeons, still
will be defunct. So we tweak the above logic to
expect the worker to send us a signal within 60 secs
(in the form of closing its end of a pipe). The worker
does this when it's done with the setup stage
ready to enter the service loop (note it's the setup
stage which is vulnerable to hangs -- the full
blown worker blows up on EPIPE if the net goes down,
due to the keep-alive thread)
"""
if not self.status.get(w[0]['dir'], None):
self.status[w[0]['dir']] = GeorepStatus(
gconf.get("state-file"), w[0]['host'], w[0]['dir'],
w[0]['uuid'], master, "%s::%s" % (slave_host, slave_vol))
set_monitor_status(gconf.get("state-file"), self.ST_STARTED)
self.status[w[0]['dir']].set_worker_status(self.ST_INIT)
ret = 0
def nwait(p, o=0):
try:
p2, r = waitpid(p, o)
if not p2:
return
return r
except OSError as e:
# no child process, this happens if the child process
# already died and has been cleaned up
if e.errno == ECHILD:
return -1
else:
raise
def exit_signalled(s):
""" child teminated due to receipt of SIGUSR1 """
return (os.WIFSIGNALED(s) and (os.WTERMSIG(s) == signal.SIGUSR1))
def exit_status(s):
if os.WIFEXITED(s):
return os.WEXITSTATUS(s)
return 1
conn_timeout = gconf.get("connection-timeout")
while ret in (0, 1):
remote_user, remote_host = w[1][0].split("@")
remote_id = w[1][1]
# Check the status of the connected slave node
# If the connected slave node is down then try to connect to
# different up node.
current_slave_host = remote_host
slave_up_hosts = get_up_nodes(slavenodes, gconf.get("ssh-port"))
if (current_slave_host, remote_id) not in slave_up_hosts:
if len(slave_up_hosts) > 0:
remote_new = random.choice(slave_up_hosts)
remote_host = "%s@%s" % (remote_user, remote_new[0])
remote_id = remote_new[1]
# Spawn the worker and agent in lock to avoid fd leak
self.lock.acquire()
logging.info(
lf('starting gsyncd worker',
brick=w[0]['dir'],
slave_node=remote_host))
# Couple of pipe pairs for RPC communication b/w
# worker and changelog agent.
# read/write end for agent
(ra, ww) = os.pipe()
# read/write end for worker
(rw, wa) = os.pipe()
# spawn the agent process
apid = os.fork()
if apid == 0:
os.close(rw)
os.close(ww)
args_to_agent = argv + [
'agent', rconf.args.master, rconf.args.slave,
'--local-path', w[0]['dir'], '--local-node', w[0]['host'],
'--local-node-id', w[0]['uuid'], '--slave-id', suuid,
'--rpc-fd', ','.join(
[str(ra), str(wa), str(rw),
str(ww)])
]
if rconf.args.config_file is not None:
args_to_agent += ['-c', rconf.args.config_file]
if rconf.args.debug:
args_to_agent.append("--debug")
os.execv(sys.executable, args_to_agent)
pr, pw = os.pipe()
cpid = os.fork()
if cpid == 0:
os.close(pr)
os.close(ra)
os.close(wa)
args_to_worker = argv + [
'worker', rconf.args.master, rconf.args.slave,
'--feedback-fd',
str(pw), '--local-path', w[0]['dir'], '--local-node',
w[0]['host'], '--local-node-id', w[0]['uuid'],
'--slave-id', suuid, '--rpc-fd', ','.join(
[str(rw), str(ww), str(ra),
str(wa)]), '--subvol-num',
str(w[2]), '--resource-remote', remote_host,
'--resource-remote-id', remote_id
]
if rconf.args.config_file is not None:
args_to_worker += ['-c', rconf.args.config_file]
if w[3]:
args_to_worker.append("--is-hottier")
if rconf.args.debug:
args_to_worker.append("--debug")
os.execv(sys.executable, args_to_worker)
cpids.add(cpid)
agents.add(apid)
os.close(pw)
# close all RPC pipes in monitor
os.close(ra)
os.close(wa)
os.close(rw)
os.close(ww)
self.lock.release()
t0 = time.time()
so = select((pr, ), (), (), conn_timeout)[0]
os.close(pr)
if so:
ret = nwait(cpid, os.WNOHANG)
ret_agent = nwait(apid, os.WNOHANG)
if ret_agent is not None:
# Agent is died Kill Worker
logging.info(
lf("Changelog Agent died, Aborting Worker",
brick=w[0]['dir']))
errno_wrap(os.kill, [cpid, signal.SIGKILL], [ESRCH])
nwait(cpid)
nwait(apid)
if ret is not None:
logging.info(
lf("worker died before establishing "
"connection",
brick=w[0]['dir']))
nwait(apid) # wait for agent
else:
logging.debug("worker(%s) connected" % w[0]['dir'])
while time.time() < t0 + conn_timeout:
ret = nwait(cpid, os.WNOHANG)
ret_agent = nwait(apid, os.WNOHANG)
if ret is not None:
logging.info(
lf("worker died in startup phase",
brick=w[0]['dir']))
nwait(apid) # wait for agent
break
if ret_agent is not None:
# Agent is died Kill Worker
logging.info(
lf("Changelog Agent died, Aborting "
"Worker",
brick=w[0]['dir']))
errno_wrap(os.kill, [cpid, signal.SIGKILL],
[ESRCH])
nwait(cpid)
nwait(apid)
break
time.sleep(1)
else:
logging.info(
lf(
"Worker not confirmed after wait, aborting it. "
"Gsyncd invocation on remote slave via SSH or "
"gluster master mount might have hung. Please "
"check the above logs for exact issue and check "
"master or slave volume for errors. Restarting "
"master/slave volume accordingly might help.",
brick=w[0]['dir'],
timeout=conn_timeout))
errno_wrap(os.kill, [cpid, signal.SIGKILL], [ESRCH])
nwait(apid) # wait for agent
ret = nwait(cpid)
if ret is None:
# If worker dies, agent terminates on EOF.
# So lets wait for agent first.
nwait(apid)
ret = nwait(cpid)
if exit_signalled(ret):
ret = 0
else:
ret = exit_status(ret)
if ret in (0, 1):
self.status[w[0]['dir']].set_worker_status(self.ST_FAULTY)
gf_event(EVENT_GEOREP_FAULTY,
master_volume=master.volume,
master_node=w[0]['host'],
master_node_id=w[0]['uuid'],
slave_host=slave_host,
slave_volume=slave_vol,
current_slave_host=current_slave_host,
brick_path=w[0]['dir'])
time.sleep(10)
self.status[w[0]['dir']].set_worker_status(self.ST_INCON)
return ret
def main_i():
"""internal main routine
parse command line, decide what action will be taken;
we can either:
- query/manipulate configuration
- format gsyncd urls using gsyncd's url parsing engine
- start service in following modes, in given stages:
- agent: startup(), ChangelogAgent()
- monitor: startup(), monitor()
- master: startup(), connect_remote(), connect(), service_loop()
- slave: startup(), connect(), service_loop()
"""
rconf = {'go_daemon': 'should'}
def store_abs(opt, optstr, val, parser):
if val and val != '-':
val = os.path.abspath(val)
setattr(parser.values, opt.dest, val)
def store_local(opt, optstr, val, parser):
rconf[opt.dest] = val
def store_local_curry(val):
return lambda o, oo, vx, p: store_local(o, oo, val, p)
def store_local_obj(op, dmake):
return lambda o, oo, vx, p: store_local(
o, oo, FreeObject(op=op, **dmake(vx)), p)
op = OptionParser(usage="%prog [options...] <master> <slave>",
version="%prog 0.0.1")
op.add_option('--gluster-command-dir', metavar='DIR', default='')
op.add_option('--gluster-log-file',
metavar='LOGF',
default=os.devnull,
type=str,
action='callback',
callback=store_abs)
op.add_option('--gluster-log-level', metavar='LVL')
op.add_option('--changelog-log-level', metavar='LVL', default="INFO")
op.add_option('--gluster-params', metavar='PRMS', default='')
op.add_option('--glusterd-uuid',
metavar='UUID',
type=str,
default='',
help=SUPPRESS_HELP)
op.add_option('--gluster-cli-options',
metavar='OPTS',
default='--log-file=-')
op.add_option('--mountbroker', metavar='LABEL')
op.add_option('-p',
'--pid-file',
metavar='PIDF',
type=str,
action='callback',
callback=store_abs)
op.add_option('-l',
'--log-file',
metavar='LOGF',
type=str,
action='callback',
callback=store_abs)
op.add_option('--iprefix',
metavar='LOGD',
type=str,
action='callback',
callback=store_abs)
op.add_option('--changelog-log-file',
metavar='LOGF',
type=str,
action='callback',
callback=store_abs)
op.add_option('--log-file-mbr',
metavar='LOGF',
type=str,
action='callback',
callback=store_abs)
op.add_option('--state-file',
metavar='STATF',
type=str,
action='callback',
callback=store_abs)
op.add_option('--state-detail-file',
metavar='STATF',
type=str,
action='callback',
callback=store_abs)
op.add_option('--georep-session-working-dir',
metavar='STATF',
type=str,
action='callback',
callback=store_abs)
op.add_option('--ignore-deletes', default=False, action='store_true')
op.add_option('--isolated-slave', default=False, action='store_true')
op.add_option('--use-rsync-xattrs', default=False, action='store_true')
op.add_option('--sync-xattrs', default=True, action='store_true')
op.add_option('--sync-acls', default=True, action='store_true')
op.add_option('--log-rsync-performance',
default=False,
action='store_true')
op.add_option('--max-rsync-retries', type=int, default=10)
op.add_option('--pause-on-start', default=False, action='store_true')
op.add_option('-L', '--log-level', metavar='LVL')
op.add_option('-r',
'--remote-gsyncd',
metavar='CMD',
default=os.path.abspath(sys.argv[0]))
op.add_option('--volume-id', metavar='UUID')
op.add_option('--slave-id', metavar='ID')
op.add_option('--session-owner', metavar='ID')
op.add_option('--local-id', metavar='ID', help=SUPPRESS_HELP, default='')
op.add_option('--local-path',
metavar='PATH',
help=SUPPRESS_HELP,
default='')
op.add_option('-s', '--ssh-command', metavar='CMD', default='ssh')
op.add_option('--ssh-port', metavar='PORT', type=int, default=22)
op.add_option('--ssh-command-tar', metavar='CMD', default='ssh')
op.add_option('--rsync-command', metavar='CMD', default='rsync')
op.add_option('--rsync-options', metavar='OPTS', default='')
op.add_option('--rsync-ssh-options', metavar='OPTS', default='--compress')
op.add_option('--timeout', metavar='SEC', type=int, default=120)
op.add_option('--connection-timeout',
metavar='SEC',
type=int,
default=60,
help=SUPPRESS_HELP)
op.add_option('--sync-jobs', metavar='N', type=int, default=3)
op.add_option('--replica-failover-interval',
metavar='N',
type=int,
default=1)
op.add_option('--changelog-archive-format',
metavar='N',
type=str,
default="%Y%m")
op.add_option('--use-meta-volume', default=False, action='store_true')
op.add_option('--meta-volume-mnt',
metavar='N',
type=str,
default="/var/run/gluster/shared_storage")
op.add_option('--turns',
metavar='N',
type=int,
default=0,
help=SUPPRESS_HELP)
op.add_option('--allow-network', metavar='IPS', default='')
op.add_option('--socketdir', metavar='DIR')
op.add_option('--state-socket-unencoded',
metavar='SOCKF',
type=str,
action='callback',
callback=store_abs)
op.add_option('--checkpoint', metavar='LABEL', default='0')
# tunables for failover/failback mechanism:
# None - gsyncd behaves as normal
# blind - gsyncd works with xtime pairs to identify
# candidates for synchronization
# wrapup - same as normal mode but does not assign
# xtimes to orphaned files
# see crawl() for usage of the above tunables
op.add_option('--special-sync-mode', type=str, help=SUPPRESS_HELP)
# changelog or xtime? (TODO: Change the default)
op.add_option('--change-detector',
metavar='MODE',
type=str,
default='xtime')
# sleep interval for change detection (xtime crawl uses a hardcoded 1
# second sleep time)
op.add_option('--change-interval', metavar='SEC', type=int, default=3)
# working directory for changelog based mechanism
op.add_option('--working-dir',
metavar='DIR',
type=str,
action='callback',
callback=store_abs)
op.add_option('--use-tarssh', default=False, action='store_true')
op.add_option('-c',
'--config-file',
metavar='CONF',
type=str,
action='callback',
callback=store_local)
# duh. need to specify dest or value will be mapped to None :S
op.add_option('--monitor',
dest='monitor',
action='callback',
callback=store_local_curry(True))
op.add_option('--agent',
dest='agent',
action='callback',
callback=store_local_curry(True))
op.add_option('--resource-local',
dest='resource_local',
type=str,
action='callback',
callback=store_local)
op.add_option('--resource-remote',
dest='resource_remote',
type=str,
action='callback',
callback=store_local)
op.add_option('--feedback-fd',
dest='feedback_fd',
type=int,
help=SUPPRESS_HELP,
action='callback',
callback=store_local)
op.add_option('--rpc-fd', dest='rpc_fd', type=str, help=SUPPRESS_HELP)
op.add_option('--subvol-num',
dest='subvol_num',
type=str,
help=SUPPRESS_HELP)
op.add_option('--listen',
dest='listen',
help=SUPPRESS_HELP,
action='callback',
callback=store_local_curry(True))
op.add_option('-N',
'--no-daemon',
dest="go_daemon",
action='callback',
callback=store_local_curry('dont'))
op.add_option('--verify',
type=str,
dest="verify",
action='callback',
callback=store_local)
op.add_option('--slavevoluuid-get',
type=str,
dest="slavevoluuid_get",
action='callback',
callback=store_local)
op.add_option('--create',
type=str,
dest="create",
action='callback',
callback=store_local)
op.add_option('--delete',
dest='delete',
action='callback',
callback=store_local_curry(True))
op.add_option('--path-list',
dest='path_list',
action='callback',
type=str,
callback=store_local)
op.add_option('--reset-sync-time', default=False, action='store_true')
op.add_option('--status-get',
dest='status_get',
action='callback',
callback=store_local_curry(True))
op.add_option('--debug',
dest="go_daemon",
action='callback',
callback=lambda *a:
(store_local_curry('dont')
(*a), setattr(a[-1].values, 'log_file', '-'),
setattr(a[-1].values, 'log_level', 'DEBUG'),
setattr(a[-1].values, 'changelog_log_file', '-')))
op.add_option('--path', type=str, action='append')
for a in ('check', 'get'):
op.add_option('--config-' + a,
metavar='OPT',
type=str,
dest='config',
action='callback',
callback=store_local_obj(a, lambda vx: {'opt': vx}))
op.add_option('--config-get-all',
dest='config',
action='callback',
callback=store_local_obj('get', lambda vx: {'opt': None}))
for m in ('', '-rx', '-glob'):
# call this code 'Pythonic' eh?
# have to define a one-shot local function to be able
# to inject (a value depending on the)
# iteration variable into the inner lambda
def conf_mod_opt_regex_variant(rx):
op.add_option('--config-set' + m,
metavar='OPT VAL',
type=str,
nargs=2,
dest='config',
action='callback',
callback=store_local_obj(
'set', lambda vx: {
'opt': vx[0],
'val': vx[1],
'rx': rx
}))
op.add_option('--config-del' + m,
metavar='OPT',
type=str,
dest='config',
action='callback',
callback=store_local_obj(
'del', lambda vx: {
'opt': vx,
'rx': rx
}))
conf_mod_opt_regex_variant(m and m[1:] or False)
op.add_option('--normalize-url',
dest='url_print',
action='callback',
callback=store_local_curry('normal'))
op.add_option('--canonicalize-url',
dest='url_print',
action='callback',
callback=store_local_curry('canon'))
op.add_option('--canonicalize-escape-url',
dest='url_print',
action='callback',
callback=store_local_curry('canon_esc'))
op.add_option('--is-hottier', default=False, action='store_true')
tunables = [
norm(o.get_opt_string()[2:]) for o in op.option_list
if (o.callback in (store_abs, 'store_true',
None) and o.get_opt_string() not in ('--version',
'--help'))
]
remote_tunables = [
'listen', 'go_daemon', 'timeout', 'session_owner', 'config_file',
'use_rsync_xattrs'
]
rq_remote_tunables = {'listen': True}
# precedence for sources of values: 1) commandline, 2) cfg file, 3)
# defaults for this to work out we need to tell apart defaults from
# explicitly set options... so churn out the defaults here and call
# the parser with virgin values container.
defaults = op.get_default_values()
opts, args = op.parse_args(values=optparse.Values())
# slave url cleanup, if input comes with vol uuid as follows
# 'ssh://fvm1::gv2:07dfddca-94bb-4841-a051-a7e582811467'
temp_args = []
for arg in args:
# Split based on ::
data = arg.split("::")
if len(data) > 1:
slavevol_name = data[1].split(":")[0]
temp_args.append("%s::%s" % (data[0], slavevol_name))
else:
temp_args.append(data[0])
args = temp_args
args_orig = args[:]
voluuid_get = rconf.get('slavevoluuid_get')
if voluuid_get:
slave_host, slave_vol = voluuid_get.split("::")
svol_uuid = slave_vol_uuid_get(slave_host, slave_vol)
print svol_uuid
return
r = rconf.get('resource_local')
if r:
if len(args) == 0:
args.append(None)
args[0] = r
r = rconf.get('resource_remote')
if r:
if len(args) == 0:
raise GsyncdError('local resource unspecfied')
elif len(args) == 1:
args.append(None)
args[1] = r
confdata = rconf.get('config')
if not (len(args) == 2 or (len(args) == 1 and rconf.get('listen')) or
(len(args) <= 2 and confdata) or rconf.get('url_print')):
sys.stderr.write("error: incorrect number of arguments\n\n")
sys.stderr.write(op.get_usage() + "\n")
sys.exit(1)
verify = rconf.get('verify')
if verify:
logging.info(verify)
logging.info("Able to spawn gsyncd.py")
return
restricted = os.getenv('_GSYNCD_RESTRICTED_')
if restricted:
allopts = {}
allopts.update(opts.__dict__)
allopts.update(rconf)
bannedtuns = set(allopts.keys()) - set(remote_tunables)
if bannedtuns:
raise GsyncdError('following tunables cannot be set with '
'restricted SSH invocaton: ' +
', '.join(bannedtuns))
for k, v in rq_remote_tunables.items():
if not k in allopts or allopts[k] != v:
raise GsyncdError('tunable %s is not set to value %s required '
'for restricted SSH invocaton' % (k, v))
confrx = getattr(confdata, 'rx', None)
def makersc(aa, check=True):
if not aa:
return ([], None, None)
ra = [resource.parse_url(u) for u in aa]
local = ra[0]
remote = None
if len(ra) > 1:
remote = ra[1]
if check and not local.can_connect_to(remote):
raise GsyncdError("%s cannot work with %s" %
(local.path, remote and remote.path))
return (ra, local, remote)
if confrx:
# peers are regexen, don't try to parse them
if confrx == 'glob':
args = ['\A' + fnmatch.translate(a) for a in args]
canon_peers = args
namedict = {}
else:
dc = rconf.get('url_print')
rscs, local, remote = makersc(args_orig, not dc)
if dc:
for r in rscs:
print(
r.get_url(
**{
'normal': {},
'canon': {
'canonical': True
},
'canon_esc': {
'canonical': True,
'escaped': True
}
}[dc]))
return
pa = ([], [], [])
urlprms = ({}, {
'canonical': True
}, {
'canonical': True,
'escaped': True
})
for x in rscs:
for i in range(len(pa)):
pa[i].append(x.get_url(**urlprms[i]))
_, canon_peers, canon_esc_peers = pa
# creating the namedict, a dict representing various ways of referring
# to / repreenting peers to be fillable in config templates
mods = (lambda x: x, lambda x: x[0].upper() + x[1:],
lambda x: 'e' + x[0].upper() + x[1:])
if remote:
rmap = {local: ('local', 'master'), remote: ('remote', 'slave')}
else:
rmap = {local: ('local', 'slave')}
namedict = {}
for i in range(len(rscs)):
x = rscs[i]
for name in rmap[x]:
for j in range(3):
namedict[mods[j](name)] = pa[j][i]
namedict[name + 'vol'] = x.volume
if name == 'remote':
namedict['remotehost'] = x.remotehost
if not 'config_file' in rconf:
rconf['config_file'] = TMPL_CONFIG_FILE
upgrade_config_file(rconf['config_file'], confdata)
gcnf = GConffile(rconf['config_file'], canon_peers, confdata,
defaults.__dict__, opts.__dict__, namedict)
checkpoint_change = False
if confdata:
opt_ok = norm(confdata.opt) in tunables + [None]
if confdata.op == 'check':
if opt_ok:
sys.exit(0)
else:
sys.exit(1)
elif not opt_ok:
raise GsyncdError("not a valid option: " + confdata.opt)
if confdata.op == 'get':
gcnf.get(confdata.opt)
elif confdata.op == 'set':
gcnf.set(confdata.opt, confdata.val, confdata.rx)
elif confdata.op == 'del':
gcnf.delete(confdata.opt, confdata.rx)
# when modifying checkpoint, it's important to make a log
# of that, so in that case we go on to set up logging even
# if its just config invocation
if confdata.opt == 'checkpoint' and confdata.op in ('set', 'del') and \
not confdata.rx:
checkpoint_change = True
if not checkpoint_change:
return
gconf.__dict__.update(defaults.__dict__)
gcnf.update_to(gconf.__dict__)
gconf.__dict__.update(opts.__dict__)
gconf.configinterface = gcnf
delete = rconf.get('delete')
if delete:
logging.info('geo-replication delete')
# remove the stime xattr from all the brick paths so that
# a re-create of a session will start sync all over again
stime_xattr_name = getattr(gconf, 'master.stime_xattr_name', None)
# Delete pid file, status file, socket file
cleanup_paths = []
if getattr(gconf, 'pid_file', None):
cleanup_paths.append(gconf.pid_file)
if getattr(gconf, 'state_file', None):
cleanup_paths.append(gconf.state_file)
if getattr(gconf, 'state_detail_file', None):
cleanup_paths.append(gconf.state_detail_file)
if getattr(gconf, 'state_socket_unencoded', None):
cleanup_paths.append(gconf.state_socket_unencoded)
cleanup_paths.append(rconf['config_file'][:-11] + "*")
# Cleanup changelog working dirs
if getattr(gconf, 'working_dir', None):
try:
shutil.rmtree(gconf.working_dir)
except (IOError, OSError):
if sys.exc_info()[1].errno == ENOENT:
pass
else:
raise GsyncdError('Error while removing working dir: %s' %
gconf.working_dir)
for path in cleanup_paths:
# To delete temp files
for f in glob.glob(path + "*"):
_unlink(f)
reset_sync_time = boolify(gconf.reset_sync_time)
if reset_sync_time and stime_xattr_name:
path_list = rconf.get('path_list')
paths = []
for p in path_list.split('--path='):
stripped_path = p.strip()
if stripped_path != "":
# set stime to (0,0) to trigger full volume content resync
# to slave on session recreation
# look at master.py::Xcrawl hint: zero_zero
Xattr.lsetxattr(stripped_path, stime_xattr_name,
struct.pack("!II", 0, 0))
return
if restricted and gconf.allow_network:
ssh_conn = os.getenv('SSH_CONNECTION')
if not ssh_conn:
# legacy env var
ssh_conn = os.getenv('SSH_CLIENT')
if ssh_conn:
allowed_networks = [
IPNetwork(a) for a in gconf.allow_network.split(',')
]
client_ip = IPAddress(ssh_conn.split()[0])
allowed = False
for nw in allowed_networks:
if client_ip in nw:
allowed = True
break
if not allowed:
raise GsyncdError("client IP address is not allowed")
ffd = rconf.get('feedback_fd')
if ffd:
fcntl.fcntl(ffd, fcntl.F_SETFD, fcntl.FD_CLOEXEC)
# normalize loglevel
lvl0 = gconf.log_level
if isinstance(lvl0, str):
lvl1 = lvl0.upper()
lvl2 = logging.getLevelName(lvl1)
# I have _never_ _ever_ seen such an utterly braindead
# error condition
if lvl2 == "Level " + lvl1:
raise GsyncdError('cannot recognize log level "%s"' % lvl0)
gconf.log_level = lvl2
if not privileged() and gconf.log_file_mbr:
gconf.log_file = gconf.log_file_mbr
if checkpoint_change:
try:
GLogger._gsyncd_loginit(log_file=gconf.log_file, label='conf')
if confdata.op == 'set':
logging.info('checkpoint %s set' % confdata.val)
elif confdata.op == 'del':
logging.info('checkpoint info was reset')
except IOError:
if sys.exc_info()[1].errno == ENOENT:
# directory of log path is not present,
# which happens if we get here from
# a peer-multiplexed "config-set checkpoint"
# (as that directory is created only on the
# original node)
pass
else:
raise
return
create = rconf.get('create')
if create:
if getattr(gconf, 'state_file', None):
set_monitor_status(gconf.state_file, create)
return
go_daemon = rconf['go_daemon']
be_monitor = rconf.get('monitor')
be_agent = rconf.get('agent')
rscs, local, remote = makersc(args)
status_get = rconf.get('status_get')
if status_get:
for brick in gconf.path:
brick_status = GeorepStatus(gconf.state_file, brick,
getattr(gconf, "pid_file", None))
checkpoint_time = int(getattr(gconf, "checkpoint", "0"))
brick_status.print_status(checkpoint_time=checkpoint_time)
return
if not be_monitor and isinstance(remote, resource.SSH) and \
go_daemon == 'should':
go_daemon = 'postconn'
log_file = None
else:
log_file = gconf.log_file
if be_monitor:
label = 'monitor'
elif be_agent:
label = 'agent'
elif remote:
# master
label = gconf.local_path
else:
label = 'slave'
startup(go_daemon=go_daemon, log_file=log_file, label=label)
resource.Popen.init_errhandler()
if be_agent:
os.setsid()
logging.debug('rpc_fd: %s' % repr(gconf.rpc_fd))
return agent(Changelog(), gconf.rpc_fd)
if be_monitor:
return monitor(*rscs)
logging.info("syncing: %s" % " -> ".join(r.url for r in rscs))
if remote:
go_daemon = remote.connect_remote(go_daemon=go_daemon)
if go_daemon:
startup(go_daemon=go_daemon, log_file=gconf.log_file)
# complete remote connection in child
remote.connect_remote(go_daemon='done')
local.connect()
if ffd:
os.close(ffd)
local.service_loop(*[r for r in [remote] if r])
def main_i():
"""internal main routine
parse command line, decide what action will be taken;
we can either:
- query/manipulate configuration
- format gsyncd urls using gsyncd's url parsing engine
- start service in following modes, in given stages:
- agent: startup(), ChangelogAgent()
- monitor: startup(), monitor()
- master: startup(), connect_remote(), connect(), service_loop()
- slave: startup(), connect(), service_loop()
"""
rconf = {'go_daemon': 'should'}
def store_abs(opt, optstr, val, parser):
if val and val != '-':
val = os.path.abspath(val)
setattr(parser.values, opt.dest, val)
def store_local(opt, optstr, val, parser):
rconf[opt.dest] = val
def store_local_curry(val):
return lambda o, oo, vx, p: store_local(o, oo, val, p)
def store_local_obj(op, dmake):
return lambda o, oo, vx, p: store_local(
o, oo, FreeObject(op=op, **dmake(vx)), p)
op = OptionParser(
usage="%prog [options...] <master> <slave>", version="%prog 0.0.1")
op.add_option('--gluster-command-dir', metavar='DIR', default='')
op.add_option('--gluster-log-file', metavar='LOGF',
default=os.devnull, type=str, action='callback',
callback=store_abs)
op.add_option('--gluster-log-level', metavar='LVL')
op.add_option('--changelog-log-level', metavar='LVL', default="INFO")
op.add_option('--gluster-params', metavar='PRMS', default='')
op.add_option(
'--glusterd-uuid', metavar='UUID', type=str, default='',
help=SUPPRESS_HELP)
op.add_option(
'--gluster-cli-options', metavar='OPTS', default='--log-file=-')
op.add_option('--mountbroker', metavar='LABEL')
op.add_option('-p', '--pid-file', metavar='PIDF', type=str,
action='callback', callback=store_abs)
op.add_option('-l', '--log-file', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--iprefix', metavar='LOGD', type=str,
action='callback', callback=store_abs)
op.add_option('--changelog-log-file', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--log-file-mbr', metavar='LOGF', type=str,
action='callback', callback=store_abs)
op.add_option('--state-file', metavar='STATF', type=str,
action='callback', callback=store_abs)
op.add_option('--state-detail-file', metavar='STATF',
type=str, action='callback', callback=store_abs)
op.add_option('--georep-session-working-dir', metavar='STATF',
type=str, action='callback', callback=store_abs)
op.add_option('--ignore-deletes', default=False, action='store_true')
op.add_option('--isolated-slave', default=False, action='store_true')
op.add_option('--use-rsync-xattrs', default=False, action='store_true')
op.add_option('--sync-xattrs', default=True, action='store_true')
op.add_option('--sync-acls', default=True, action='store_true')
op.add_option('--log-rsync-performance', default=False,
action='store_true')
op.add_option('--max-rsync-retries', type=int, default=10)
op.add_option('--pause-on-start', default=False, action='store_true')
op.add_option('-L', '--log-level', metavar='LVL')
op.add_option('-r', '--remote-gsyncd', metavar='CMD',
default=os.path.abspath(sys.argv[0]))
op.add_option('--volume-id', metavar='UUID')
op.add_option('--slave-id', metavar='ID')
op.add_option('--session-owner', metavar='ID')
op.add_option('--local-id', metavar='ID', help=SUPPRESS_HELP, default='')
op.add_option(
'--local-node', metavar='NODE', help=SUPPRESS_HELP, default='')
op.add_option(
'--local-node-id', metavar='NODEID', help=SUPPRESS_HELP, default='')
op.add_option(
'--local-path', metavar='PATH', help=SUPPRESS_HELP, default='')
op.add_option('-s', '--ssh-command', metavar='CMD', default='ssh')
op.add_option('--ssh-port', metavar='PORT', type=int, default=22)
op.add_option('--ssh-command-tar', metavar='CMD', default='ssh')
op.add_option('--rsync-command', metavar='CMD', default='rsync')
op.add_option('--rsync-options', metavar='OPTS', default='')
op.add_option('--rsync-ssh-options', metavar='OPTS', default='--compress')
op.add_option('--timeout', metavar='SEC', type=int, default=120)
op.add_option('--connection-timeout', metavar='SEC',
type=int, default=60, help=SUPPRESS_HELP)
op.add_option('--sync-jobs', metavar='N', type=int, default=3)
op.add_option('--replica-failover-interval', metavar='N',
type=int, default=1)
op.add_option('--changelog-archive-format', metavar='N',
type=str, default="%Y%m")
op.add_option('--use-meta-volume', default=False, action='store_true')
op.add_option('--meta-volume-mnt', metavar='N',
type=str, default="/var/run/gluster/shared_storage")
op.add_option(
'--turns', metavar='N', type=int, default=0, help=SUPPRESS_HELP)
op.add_option('--allow-network', metavar='IPS', default='')
op.add_option('--socketdir', metavar='DIR')
op.add_option('--state-socket-unencoded', metavar='SOCKF',
type=str, action='callback', callback=store_abs)
op.add_option('--checkpoint', metavar='LABEL', default='0')
# tunables for failover/failback mechanism:
# None - gsyncd behaves as normal
# blind - gsyncd works with xtime pairs to identify
# candidates for synchronization
# wrapup - same as normal mode but does not assign
# xtimes to orphaned files
# see crawl() for usage of the above tunables
op.add_option('--special-sync-mode', type=str, help=SUPPRESS_HELP)
# changelog or xtime? (TODO: Change the default)
op.add_option(
'--change-detector', metavar='MODE', type=str, default='xtime')
# sleep interval for change detection (xtime crawl uses a hardcoded 1
# second sleep time)
op.add_option('--change-interval', metavar='SEC', type=int, default=3)
# working directory for changelog based mechanism
op.add_option('--working-dir', metavar='DIR', type=str,
action='callback', callback=store_abs)
op.add_option('--use-tarssh', default=False, action='store_true')
op.add_option('-c', '--config-file', metavar='CONF',
type=str, action='callback', callback=store_local)
# duh. need to specify dest or value will be mapped to None :S
op.add_option('--monitor', dest='monitor', action='callback',
callback=store_local_curry(True))
op.add_option('--agent', dest='agent', action='callback',
callback=store_local_curry(True))
op.add_option('--resource-local', dest='resource_local',
type=str, action='callback', callback=store_local)
op.add_option('--resource-remote', dest='resource_remote',
type=str, action='callback', callback=store_local)
op.add_option('--feedback-fd', dest='feedback_fd', type=int,
help=SUPPRESS_HELP, action='callback', callback=store_local)
op.add_option('--rpc-fd', dest='rpc_fd', type=str, help=SUPPRESS_HELP)
op.add_option('--subvol-num', dest='subvol_num', type=str,
help=SUPPRESS_HELP)
op.add_option('--listen', dest='listen', help=SUPPRESS_HELP,
action='callback', callback=store_local_curry(True))
op.add_option('-N', '--no-daemon', dest="go_daemon",
action='callback', callback=store_local_curry('dont'))
op.add_option('--verify', type=str, dest="verify",
action='callback', callback=store_local)
op.add_option('--slavevoluuid-get', type=str, dest="slavevoluuid_get",
action='callback', callback=store_local)
op.add_option('--create', type=str, dest="create",
action='callback', callback=store_local)
op.add_option('--delete', dest='delete', action='callback',
callback=store_local_curry(True))
op.add_option('--path-list', dest='path_list', action='callback',
type=str, callback=store_local)
op.add_option('--reset-sync-time', default=False, action='store_true')
op.add_option('--status-get', dest='status_get', action='callback',
callback=store_local_curry(True))
op.add_option('--debug', dest="go_daemon", action='callback',
callback=lambda *a: (store_local_curry('dont')(*a),
setattr(
a[-1].values, 'log_file', '-'),
setattr(a[-1].values, 'log_level',
'DEBUG'),
setattr(a[-1].values,
'changelog_log_file', '-')))
op.add_option('--path', type=str, action='append')
for a in ('check', 'get'):
op.add_option('--config-' + a, metavar='OPT', type=str, dest='config',
action='callback',
callback=store_local_obj(a, lambda vx: {'opt': vx}))
op.add_option('--config-get-all', dest='config', action='callback',
callback=store_local_obj('get', lambda vx: {'opt': None}))
for m in ('', '-rx', '-glob'):
# call this code 'Pythonic' eh?
# have to define a one-shot local function to be able
# to inject (a value depending on the)
# iteration variable into the inner lambda
def conf_mod_opt_regex_variant(rx):
op.add_option('--config-set' + m, metavar='OPT VAL', type=str,
nargs=2, dest='config', action='callback',
callback=store_local_obj('set', lambda vx: {
'opt': vx[0], 'val': vx[1], 'rx': rx}))
op.add_option('--config-del' + m, metavar='OPT', type=str,
dest='config', action='callback',
callback=store_local_obj('del', lambda vx: {
'opt': vx, 'rx': rx}))
conf_mod_opt_regex_variant(m and m[1:] or False)
op.add_option('--normalize-url', dest='url_print',
action='callback', callback=store_local_curry('normal'))
op.add_option('--canonicalize-url', dest='url_print',
action='callback', callback=store_local_curry('canon'))
op.add_option('--canonicalize-escape-url', dest='url_print',
action='callback', callback=store_local_curry('canon_esc'))
op.add_option('--is-hottier', default=False, action='store_true')
tunables = [norm(o.get_opt_string()[2:])
for o in op.option_list
if (o.callback in (store_abs, 'store_true', None) and
o.get_opt_string() not in ('--version', '--help'))]
remote_tunables = ['listen', 'go_daemon', 'timeout',
'session_owner', 'config_file', 'use_rsync_xattrs']
rq_remote_tunables = {'listen': True}
# precedence for sources of values: 1) commandline, 2) cfg file, 3)
# defaults for this to work out we need to tell apart defaults from
# explicitly set options... so churn out the defaults here and call
# the parser with virgin values container.
defaults = op.get_default_values()
opts, args = op.parse_args(values=optparse.Values())
# slave url cleanup, if input comes with vol uuid as follows
# 'ssh://fvm1::gv2:07dfddca-94bb-4841-a051-a7e582811467'
temp_args = []
for arg in args:
# Split based on ::
data = arg.split("::")
if len(data)>1:
slavevol_name = data[1].split(":")[0]
temp_args.append("%s::%s" % (data[0], slavevol_name))
else:
temp_args.append(data[0])
args = temp_args
args_orig = args[:]
voluuid_get = rconf.get('slavevoluuid_get')
if voluuid_get:
slave_host, slave_vol = voluuid_get.split("::")
svol_uuid = slave_vol_uuid_get(slave_host, slave_vol)
print svol_uuid
return
r = rconf.get('resource_local')
if r:
if len(args) == 0:
args.append(None)
args[0] = r
r = rconf.get('resource_remote')
if r:
if len(args) == 0:
raise GsyncdError('local resource unspecfied')
elif len(args) == 1:
args.append(None)
args[1] = r
confdata = rconf.get('config')
if not (len(args) == 2 or
(len(args) == 1 and rconf.get('listen')) or
(len(args) <= 2 and confdata) or
rconf.get('url_print')):
sys.stderr.write("error: incorrect number of arguments\n\n")
sys.stderr.write(op.get_usage() + "\n")
sys.exit(1)
verify = rconf.get('verify')
if verify:
logging.info(verify)
logging.info("Able to spawn gsyncd.py")
return
restricted = os.getenv('_GSYNCD_RESTRICTED_')
if restricted:
allopts = {}
allopts.update(opts.__dict__)
allopts.update(rconf)
bannedtuns = set(allopts.keys()) - set(remote_tunables)
if bannedtuns:
raise GsyncdError('following tunables cannot be set with '
'restricted SSH invocaton: ' +
', '.join(bannedtuns))
for k, v in rq_remote_tunables.items():
if not k in allopts or allopts[k] != v:
raise GsyncdError('tunable %s is not set to value %s required '
'for restricted SSH invocaton' %
(k, v))
confrx = getattr(confdata, 'rx', None)
def makersc(aa, check=True):
if not aa:
return ([], None, None)
ra = [resource.parse_url(u) for u in aa]
local = ra[0]
remote = None
if len(ra) > 1:
remote = ra[1]
if check and not local.can_connect_to(remote):
raise GsyncdError("%s cannot work with %s" %
(local.path, remote and remote.path))
return (ra, local, remote)
if confrx:
# peers are regexen, don't try to parse them
if confrx == 'glob':
args = ['\A' + fnmatch.translate(a) for a in args]
canon_peers = args
namedict = {}
else:
dc = rconf.get('url_print')
rscs, local, remote = makersc(args_orig, not dc)
if dc:
for r in rscs:
print(r.get_url(**{'normal': {},
'canon': {'canonical': True},
'canon_esc': {'canonical': True,
'escaped': True}}[dc]))
return
pa = ([], [], [])
urlprms = (
{}, {'canonical': True}, {'canonical': True, 'escaped': True})
for x in rscs:
for i in range(len(pa)):
pa[i].append(x.get_url(**urlprms[i]))
_, canon_peers, canon_esc_peers = pa
# creating the namedict, a dict representing various ways of referring
# to / repreenting peers to be fillable in config templates
mods = (lambda x: x, lambda x: x[
0].upper() + x[1:], lambda x: 'e' + x[0].upper() + x[1:])
if remote:
rmap = {local: ('local', 'master'), remote: ('remote', 'slave')}
else:
rmap = {local: ('local', 'slave')}
namedict = {}
for i in range(len(rscs)):
x = rscs[i]
for name in rmap[x]:
for j in range(3):
namedict[mods[j](name)] = pa[j][i]
namedict[name + 'vol'] = x.volume
if name == 'remote':
namedict['remotehost'] = x.remotehost
if not 'config_file' in rconf:
rconf['config_file'] = TMPL_CONFIG_FILE
# Upgrade Config File only if it is session conf file
if rconf['config_file'] != TMPL_CONFIG_FILE:
upgrade_config_file(rconf['config_file'], confdata)
gcnf = GConffile(
rconf['config_file'], canon_peers, confdata,
defaults.__dict__, opts.__dict__, namedict)
conf_change = False
if confdata:
opt_ok = norm(confdata.opt) in tunables + [None]
if confdata.op == 'check':
if opt_ok:
sys.exit(0)
else:
sys.exit(1)
elif not opt_ok:
raise GsyncdError("not a valid option: " + confdata.opt)
if confdata.op == 'get':
gcnf.get(confdata.opt)
elif confdata.op == 'set':
gcnf.set(confdata.opt, confdata.val, confdata.rx)
elif confdata.op == 'del':
gcnf.delete(confdata.opt, confdata.rx)
# when modifying checkpoint, it's important to make a log
# of that, so in that case we go on to set up logging even
# if its just config invocation
if confdata.op in ('set', 'del') and not confdata.rx:
conf_change = True
if not conf_change:
return
gconf.__dict__.update(defaults.__dict__)
gcnf.update_to(gconf.__dict__)
gconf.__dict__.update(opts.__dict__)
gconf.configinterface = gcnf
delete = rconf.get('delete')
if delete:
logging.info('geo-replication delete')
# remove the stime xattr from all the brick paths so that
# a re-create of a session will start sync all over again
stime_xattr_name = getattr(gconf, 'master.stime_xattr_name', None)
# Delete pid file, status file, socket file
cleanup_paths = []
if getattr(gconf, 'pid_file', None):
cleanup_paths.append(gconf.pid_file)
if getattr(gconf, 'state_file', None):
cleanup_paths.append(gconf.state_file)
if getattr(gconf, 'state_detail_file', None):
cleanup_paths.append(gconf.state_detail_file)
if getattr(gconf, 'state_socket_unencoded', None):
cleanup_paths.append(gconf.state_socket_unencoded)
cleanup_paths.append(rconf['config_file'][:-11] + "*")
# Cleanup changelog working dirs
if getattr(gconf, 'working_dir', None):
try:
shutil.rmtree(gconf.working_dir)
except (IOError, OSError):
if sys.exc_info()[1].errno == ENOENT:
pass
else:
raise GsyncdError(
'Error while removing working dir: %s' %
gconf.working_dir)
for path in cleanup_paths:
# To delete temp files
for f in glob.glob(path + "*"):
_unlink(f)
reset_sync_time = boolify(gconf.reset_sync_time)
if reset_sync_time and stime_xattr_name:
path_list = rconf.get('path_list')
paths = []
for p in path_list.split('--path='):
stripped_path = p.strip()
if stripped_path != "":
# set stime to (0,0) to trigger full volume content resync
# to slave on session recreation
# look at master.py::Xcrawl hint: zero_zero
Xattr.lsetxattr(stripped_path, stime_xattr_name,
struct.pack("!II", 0, 0))
return
if restricted and gconf.allow_network:
ssh_conn = os.getenv('SSH_CONNECTION')
if not ssh_conn:
# legacy env var
ssh_conn = os.getenv('SSH_CLIENT')
if ssh_conn:
allowed_networks = [IPNetwork(a)
for a in gconf.allow_network.split(',')]
client_ip = IPAddress(ssh_conn.split()[0])
allowed = False
for nw in allowed_networks:
if client_ip in nw:
allowed = True
break
if not allowed:
raise GsyncdError("client IP address is not allowed")
ffd = rconf.get('feedback_fd')
if ffd:
fcntl.fcntl(ffd, fcntl.F_SETFD, fcntl.FD_CLOEXEC)
# normalize loglevel
lvl0 = gconf.log_level
if isinstance(lvl0, str):
lvl1 = lvl0.upper()
lvl2 = logging.getLevelName(lvl1)
# I have _never_ _ever_ seen such an utterly braindead
# error condition
if lvl2 == "Level " + lvl1:
raise GsyncdError('cannot recognize log level "%s"' % lvl0)
gconf.log_level = lvl2
if not privileged() and gconf.log_file_mbr:
gconf.log_file = gconf.log_file_mbr
if conf_change:
try:
GLogger._gsyncd_loginit(log_file=gconf.log_file, label='conf')
gconf.log_exit = False
if confdata.op == 'set':
if confdata.opt == 'checkpoint':
logging.info("Checkpoint Set: %s" % (
human_time_utc(confdata.val)))
else:
logging.info("Config Set: %s = %s" % (
confdata.opt, confdata.val))
elif confdata.op == 'del':
if confdata.opt == 'checkpoint':
logging.info("Checkpoint Reset")
else:
logging.info("Config Reset: %s" % confdata.opt)
except IOError:
if sys.exc_info()[1].errno == ENOENT:
# directory of log path is not present,
# which happens if we get here from
# a peer-multiplexed "config-set checkpoint"
# (as that directory is created only on the
# original node)
pass
else:
raise
return
create = rconf.get('create')
if create:
if getattr(gconf, 'state_file', None):
set_monitor_status(gconf.state_file, create)
try:
GLogger._gsyncd_loginit(log_file=gconf.log_file, label='monitor')
gconf.log_exit = False
logging.info("Monitor Status: %s" % create)
except IOError:
if sys.exc_info()[1].errno == ENOENT:
# If log dir not present
pass
else:
raise
return
go_daemon = rconf['go_daemon']
be_monitor = rconf.get('monitor')
be_agent = rconf.get('agent')
rscs, local, remote = makersc(args)
status_get = rconf.get('status_get')
if status_get:
master_name, slave_data = get_master_and_slave_data_from_args(args)
for brick in gconf.path:
brick_status = GeorepStatus(gconf.state_file,
gconf.local_node,
brick,
gconf.local_node_id,
master_name,
slave_data,
getattr(gconf, "pid_file", None))
checkpoint_time = int(getattr(gconf, "checkpoint", "0"))
brick_status.print_status(checkpoint_time=checkpoint_time)
return
if not be_monitor and isinstance(remote, resource.SSH) and \
go_daemon == 'should':
go_daemon = 'postconn'
log_file = None
else:
log_file = gconf.log_file
if be_monitor:
label = 'monitor'
elif be_agent:
label = gconf.local_path
elif remote:
# master
label = gconf.local_path
else:
label = 'slave'
startup(go_daemon=go_daemon, log_file=log_file, label=label)
resource.Popen.init_errhandler()
if be_agent:
os.setsid()
logging.debug('rpc_fd: %s' % repr(gconf.rpc_fd))
return agent(Changelog(), gconf.rpc_fd)
if be_monitor:
return monitor(*rscs)
if remote:
go_daemon = remote.connect_remote(go_daemon=go_daemon)
if go_daemon:
startup(go_daemon=go_daemon, log_file=gconf.log_file)
# complete remote connection in child
remote.connect_remote(go_daemon='done')
local.connect()
if ffd:
os.close(ffd)
local.service_loop(*[r for r in [remote] if r])
def monitor(self, w, argv, cpids, agents, slave_vol, slave_host, master):
"""the monitor loop
Basic logic is a blantantly simple blunt heuristics:
if spawned client survives 60 secs, it's considered OK.
This servers us pretty well as it's not vulneralbe to
any kind of irregular behavior of the child...
... well, except for one: if children is hung up on
waiting for some event, it can survive aeons, still
will be defunct. So we tweak the above logic to
expect the worker to send us a signal within 60 secs
(in the form of closing its end of a pipe). The worker
does this when it's done with the setup stage
ready to enter the service loop (note it's the setup
stage which is vulnerable to hangs -- the full
blown worker blows up on EPIPE if the net goes down,
due to the keep-alive thread)
"""
if not self.status.get(w[0]['dir'], None):
self.status[w[0]['dir']] = GeorepStatus(
gconf.state_file, w[0]['dir'], master,
"%s::%s" % (slave_host, slave_vol))
set_monitor_status(gconf.state_file, self.ST_STARTED)
self.status[w[0]['dir']].set_worker_status(self.ST_INIT)
ret = 0
def nwait(p, o=0):
try:
p2, r = waitpid(p, o)
if not p2:
return
return r
except OSError as e:
# no child process, this happens if the child process
# already died and has been cleaned up
if e.errno == ECHILD:
return -1
else:
raise
def exit_signalled(s):
""" child teminated due to receipt of SIGUSR1 """
return (os.WIFSIGNALED(s) and (os.WTERMSIG(s) == signal.SIGUSR1))
def exit_status(s):
if os.WIFEXITED(s):
return os.WEXITSTATUS(s)
return 1
conn_timeout = int(gconf.connection_timeout)
while ret in (0, 1):
remote_host = w[1]
# Check the status of the connected slave node
# If the connected slave node is down then try to connect to
# different up node.
m = re.match("(ssh|gluster|file):\/\/(.+)@([^:]+):(.+)",
remote_host)
if m:
current_slave_host = m.group(3)
slave_up_hosts = get_slave_bricks_status(slave_host, slave_vol)
if current_slave_host not in slave_up_hosts:
if len(slave_up_hosts) > 0:
remote_host = "%s://%s@%s:%s" % (m.group(1), m.group(
2), random.choice(slave_up_hosts), m.group(4))
# Spawn the worker and agent in lock to avoid fd leak
self.lock.acquire()
logging.info('starting gsyncd worker(%s). Slave node: %s' %
(w[0]['dir'], remote_host))
# Couple of pipe pairs for RPC communication b/w
# worker and changelog agent.
# read/write end for agent
(ra, ww) = os.pipe()
# read/write end for worker
(rw, wa) = os.pipe()
# spawn the agent process
apid = os.fork()
if apid == 0:
os.close(rw)
os.close(ww)
os.execv(
sys.executable, argv + [
'--local-path', w[0]['dir'], '--agent', '--rpc-fd',
','.join([str(ra), str(wa),
str(rw), str(ww)])
])
pr, pw = os.pipe()
cpid = os.fork()
if cpid == 0:
os.close(pr)
os.close(ra)
os.close(wa)
os.execv(
sys.executable, argv + [
'--feedback-fd',
str(pw), '--local-path', w[0]['dir'], '--local-id',
'.' + escape(w[0]['dir']), '--rpc-fd', ','.join(
[str(rw), str(ww),
str(ra), str(wa)]), '--subvol-num',
str(w[2])
] + (['--is-hottier'] if w[3] else []) +
['--resource-remote', remote_host])
cpids.add(cpid)
agents.add(apid)
os.close(pw)
# close all RPC pipes in monitor
os.close(ra)
os.close(wa)
os.close(rw)
os.close(ww)
self.lock.release()
t0 = time.time()
so = select((pr, ), (), (), conn_timeout)[0]
os.close(pr)
if so:
ret = nwait(cpid, os.WNOHANG)
ret_agent = nwait(apid, os.WNOHANG)
if ret_agent is not None:
# Agent is died Kill Worker
logging.info("Changelog Agent died, "
"Aborting Worker(%s)" % w[0]['dir'])
errno_wrap(os.kill, [cpid, signal.SIGKILL], [ESRCH])
nwait(cpid)
nwait(apid)
if ret is not None:
logging.info("worker(%s) died before establishing "
"connection" % w[0]['dir'])
nwait(apid) # wait for agent
else:
logging.debug("worker(%s) connected" % w[0]['dir'])
while time.time() < t0 + conn_timeout:
ret = nwait(cpid, os.WNOHANG)
ret_agent = nwait(apid, os.WNOHANG)
if ret is not None:
logging.info("worker(%s) died in startup "
"phase" % w[0]['dir'])
nwait(apid) # wait for agent
break
if ret_agent is not None:
# Agent is died Kill Worker
logging.info("Changelog Agent died, Aborting "
"Worker(%s)" % w[0]['dir'])
errno_wrap(os.kill, [cpid, signal.SIGKILL],
[ESRCH])
nwait(cpid)
nwait(apid)
break
time.sleep(1)
else:
logging.info("worker(%s) not confirmed in %d sec, "
"aborting it" % (w[0]['dir'], conn_timeout))
errno_wrap(os.kill, [cpid, signal.SIGKILL], [ESRCH])
nwait(apid) # wait for agent
ret = nwait(cpid)
if ret is None:
self.status[w[0]['dir']].set_worker_status(self.ST_STABLE)
# If worker dies, agent terminates on EOF.
# So lets wait for agent first.
nwait(apid)
ret = nwait(cpid)
if exit_signalled(ret):
ret = 0
else:
ret = exit_status(ret)
if ret in (0, 1):
self.status[w[0]['dir']].set_worker_status(self.ST_FAULTY)
gf_event(EVENT_GEOREP_FAULTY,
master_volume=master.volume,
master_node=w[0]['host'],
slave_host=slave_host,
slave_volume=slave_vol,
current_slave_host=current_slave_host,
brick_path=w[0]['dir'])
time.sleep(10)
self.status[w[0]['dir']].set_worker_status(self.ST_INCON)
return ret
def main_i():
"""internal main routine
parse command line, decide what action will be taken;
we can either:
- query/manipulate configuration
- format gsyncd urls using gsyncd's url parsing engine
- start service in following modes, in given stages:
- agent: startup(), ChangelogAgent()
- monitor: startup(), monitor()
- master: startup(), connect_remote(), connect(), service_loop()
- slave: startup(), connect(), service_loop()
"""
rconf = {"go_daemon": "should"}
def store_abs(opt, optstr, val, parser):
if val and val != "-":
val = os.path.abspath(val)
setattr(parser.values, opt.dest, val)
def store_local(opt, optstr, val, parser):
rconf[opt.dest] = val
def store_local_curry(val):
return lambda o, oo, vx, p: store_local(o, oo, val, p)
def store_local_obj(op, dmake):
return lambda o, oo, vx, p: store_local(o, oo, FreeObject(op=op, **dmake(vx)), p)
op = OptionParser(usage="%prog [options...] <master> <slave>", version="%prog 0.0.1")
op.add_option("--gluster-command-dir", metavar="DIR", default="")
op.add_option(
"--gluster-log-file", metavar="LOGF", default=os.devnull, type=str, action="callback", callback=store_abs
)
op.add_option("--gluster-log-level", metavar="LVL")
op.add_option("--gluster-params", metavar="PRMS", default="")
op.add_option("--glusterd-uuid", metavar="UUID", type=str, default="", help=SUPPRESS_HELP)
op.add_option("--gluster-cli-options", metavar="OPTS", default="--log-file=-")
op.add_option("--mountbroker", metavar="LABEL")
op.add_option("-p", "--pid-file", metavar="PIDF", type=str, action="callback", callback=store_abs)
op.add_option("-l", "--log-file", metavar="LOGF", type=str, action="callback", callback=store_abs)
op.add_option("--iprefix", metavar="LOGD", type=str, action="callback", callback=store_abs)
op.add_option("--changelog-log-file", metavar="LOGF", type=str, action="callback", callback=store_abs)
op.add_option("--log-file-mbr", metavar="LOGF", type=str, action="callback", callback=store_abs)
op.add_option("--state-file", metavar="STATF", type=str, action="callback", callback=store_abs)
op.add_option("--state-detail-file", metavar="STATF", type=str, action="callback", callback=store_abs)
op.add_option("--georep-session-working-dir", metavar="STATF", type=str, action="callback", callback=store_abs)
op.add_option("--ignore-deletes", default=False, action="store_true")
op.add_option("--isolated-slave", default=False, action="store_true")
op.add_option("--use-rsync-xattrs", default=False, action="store_true")
op.add_option("--sync-xattrs", default=True, action="store_true")
op.add_option("--sync-acls", default=True, action="store_true")
op.add_option("--log-rsync-performance", default=False, action="store_true")
op.add_option("--pause-on-start", default=False, action="store_true")
op.add_option("-L", "--log-level", metavar="LVL")
op.add_option("-r", "--remote-gsyncd", metavar="CMD", default=os.path.abspath(sys.argv[0]))
op.add_option("--volume-id", metavar="UUID")
op.add_option("--slave-id", metavar="ID")
op.add_option("--session-owner", metavar="ID")
op.add_option("--local-id", metavar="ID", help=SUPPRESS_HELP, default="")
op.add_option("--local-path", metavar="PATH", help=SUPPRESS_HELP, default="")
op.add_option("-s", "--ssh-command", metavar="CMD", default="ssh")
op.add_option("--ssh-command-tar", metavar="CMD", default="ssh")
op.add_option("--rsync-command", metavar="CMD", default="rsync")
op.add_option("--rsync-options", metavar="OPTS", default="")
op.add_option("--rsync-ssh-options", metavar="OPTS", default="--compress")
op.add_option("--timeout", metavar="SEC", type=int, default=120)
op.add_option("--connection-timeout", metavar="SEC", type=int, default=60, help=SUPPRESS_HELP)
op.add_option("--sync-jobs", metavar="N", type=int, default=3)
op.add_option("--replica-failover-interval", metavar="N", type=int, default=1)
op.add_option("--changelog-archive-format", metavar="N", type=str, default="%Y%m")
op.add_option("--use-meta-volume", default=False, action="store_true")
op.add_option("--meta-volume-mnt", metavar="N", type=str, default="/var/run/gluster/shared_storage")
op.add_option("--turns", metavar="N", type=int, default=0, help=SUPPRESS_HELP)
op.add_option("--allow-network", metavar="IPS", default="")
op.add_option("--socketdir", metavar="DIR")
op.add_option("--state-socket-unencoded", metavar="SOCKF", type=str, action="callback", callback=store_abs)
op.add_option("--checkpoint", metavar="LABEL", default="0")
# tunables for failover/failback mechanism:
# None - gsyncd behaves as normal
# blind - gsyncd works with xtime pairs to identify
# candidates for synchronization
# wrapup - same as normal mode but does not assign
# xtimes to orphaned files
# see crawl() for usage of the above tunables
op.add_option("--special-sync-mode", type=str, help=SUPPRESS_HELP)
# changelog or xtime? (TODO: Change the default)
op.add_option("--change-detector", metavar="MODE", type=str, default="xtime")
# sleep interval for change detection (xtime crawl uses a hardcoded 1
# second sleep time)
op.add_option("--change-interval", metavar="SEC", type=int, default=3)
# working directory for changelog based mechanism
op.add_option("--working-dir", metavar="DIR", type=str, action="callback", callback=store_abs)
op.add_option("--use-tarssh", default=False, action="store_true")
op.add_option("-c", "--config-file", metavar="CONF", type=str, action="callback", callback=store_local)
# duh. need to specify dest or value will be mapped to None :S
op.add_option("--monitor", dest="monitor", action="callback", callback=store_local_curry(True))
op.add_option("--agent", dest="agent", action="callback", callback=store_local_curry(True))
op.add_option("--resource-local", dest="resource_local", type=str, action="callback", callback=store_local)
op.add_option("--resource-remote", dest="resource_remote", type=str, action="callback", callback=store_local)
op.add_option(
"--feedback-fd", dest="feedback_fd", type=int, help=SUPPRESS_HELP, action="callback", callback=store_local
)
op.add_option("--rpc-fd", dest="rpc_fd", type=str, help=SUPPRESS_HELP)
op.add_option("--subvol-num", dest="subvol_num", type=int, help=SUPPRESS_HELP)
op.add_option("--listen", dest="listen", help=SUPPRESS_HELP, action="callback", callback=store_local_curry(True))
op.add_option("-N", "--no-daemon", dest="go_daemon", action="callback", callback=store_local_curry("dont"))
op.add_option("--verify", type=str, dest="verify", action="callback", callback=store_local)
op.add_option("--create", type=str, dest="create", action="callback", callback=store_local)
op.add_option("--delete", dest="delete", action="callback", callback=store_local_curry(True))
op.add_option("--status-get", dest="status_get", action="callback", callback=store_local_curry(True))
op.add_option(
"--debug",
dest="go_daemon",
action="callback",
callback=lambda *a: (
store_local_curry("dont")(*a),
setattr(a[-1].values, "log_file", "-"),
setattr(a[-1].values, "log_level", "DEBUG"),
setattr(a[-1].values, "changelog_log_file", "-"),
),
)
op.add_option("--path", type=str, action="append")
for a in ("check", "get"):
op.add_option(
"--config-" + a,
metavar="OPT",
type=str,
dest="config",
action="callback",
callback=store_local_obj(a, lambda vx: {"opt": vx}),
)
op.add_option(
"--config-get-all", dest="config", action="callback", callback=store_local_obj("get", lambda vx: {"opt": None})
)
for m in ("", "-rx", "-glob"):
# call this code 'Pythonic' eh?
# have to define a one-shot local function to be able
# to inject (a value depending on the)
# iteration variable into the inner lambda
def conf_mod_opt_regex_variant(rx):
op.add_option(
"--config-set" + m,
metavar="OPT VAL",
type=str,
nargs=2,
dest="config",
action="callback",
callback=store_local_obj("set", lambda vx: {"opt": vx[0], "val": vx[1], "rx": rx}),
)
op.add_option(
"--config-del" + m,
metavar="OPT",
type=str,
dest="config",
action="callback",
callback=store_local_obj("del", lambda vx: {"opt": vx, "rx": rx}),
)
conf_mod_opt_regex_variant(m and m[1:] or False)
op.add_option("--normalize-url", dest="url_print", action="callback", callback=store_local_curry("normal"))
op.add_option("--canonicalize-url", dest="url_print", action="callback", callback=store_local_curry("canon"))
op.add_option(
"--canonicalize-escape-url", dest="url_print", action="callback", callback=store_local_curry("canon_esc")
)
tunables = [
norm(o.get_opt_string()[2:])
for o in op.option_list
if (o.callback in (store_abs, "store_true", None) and o.get_opt_string() not in ("--version", "--help"))
]
remote_tunables = ["listen", "go_daemon", "timeout", "session_owner", "config_file", "use_rsync_xattrs"]
rq_remote_tunables = {"listen": True}
# precedence for sources of values: 1) commandline, 2) cfg file, 3)
# defaults for this to work out we need to tell apart defaults from
# explicitly set options... so churn out the defaults here and call
# the parser with virgin values container.
defaults = op.get_default_values()
opts, args = op.parse_args(values=optparse.Values())
args_orig = args[:]
r = rconf.get("resource_local")
if r:
if len(args) == 0:
args.append(None)
args[0] = r
r = rconf.get("resource_remote")
if r:
if len(args) == 0:
raise GsyncdError("local resource unspecfied")
elif len(args) == 1:
args.append(None)
args[1] = r
confdata = rconf.get("config")
if not (
len(args) == 2
or (len(args) == 1 and rconf.get("listen"))
or (len(args) <= 2 and confdata)
or rconf.get("url_print")
):
sys.stderr.write("error: incorrect number of arguments\n\n")
sys.stderr.write(op.get_usage() + "\n")
sys.exit(1)
verify = rconf.get("verify")
if verify:
logging.info(verify)
logging.info("Able to spawn gsyncd.py")
return
restricted = os.getenv("_GSYNCD_RESTRICTED_")
if restricted:
allopts = {}
allopts.update(opts.__dict__)
allopts.update(rconf)
bannedtuns = set(allopts.keys()) - set(remote_tunables)
if bannedtuns:
raise GsyncdError(
"following tunables cannot be set with " "restricted SSH invocaton: " + ", ".join(bannedtuns)
)
for k, v in rq_remote_tunables.items():
if not k in allopts or allopts[k] != v:
raise GsyncdError("tunable %s is not set to value %s required " "for restricted SSH invocaton" % (k, v))
confrx = getattr(confdata, "rx", None)
def makersc(aa, check=True):
if not aa:
return ([], None, None)
ra = [resource.parse_url(u) for u in aa]
local = ra[0]
remote = None
if len(ra) > 1:
remote = ra[1]
if check and not local.can_connect_to(remote):
raise GsyncdError("%s cannot work with %s" % (local.path, remote and remote.path))
return (ra, local, remote)
if confrx:
# peers are regexen, don't try to parse them
if confrx == "glob":
args = ["\A" + fnmatch.translate(a) for a in args]
canon_peers = args
namedict = {}
else:
dc = rconf.get("url_print")
rscs, local, remote = makersc(args_orig, not dc)
if dc:
for r in rscs:
print(
r.get_url(
**{
"normal": {},
"canon": {"canonical": True},
"canon_esc": {"canonical": True, "escaped": True},
}[dc]
)
)
return
pa = ([], [], [])
urlprms = ({}, {"canonical": True}, {"canonical": True, "escaped": True})
for x in rscs:
for i in range(len(pa)):
pa[i].append(x.get_url(**urlprms[i]))
_, canon_peers, canon_esc_peers = pa
# creating the namedict, a dict representing various ways of referring
# to / repreenting peers to be fillable in config templates
mods = (lambda x: x, lambda x: x[0].upper() + x[1:], lambda x: "e" + x[0].upper() + x[1:])
if remote:
rmap = {local: ("local", "master"), remote: ("remote", "slave")}
else:
rmap = {local: ("local", "slave")}
namedict = {}
for i in range(len(rscs)):
x = rscs[i]
for name in rmap[x]:
for j in range(3):
namedict[mods[j](name)] = pa[j][i]
namedict[name + "vol"] = x.volume
if name == "remote":
namedict["remotehost"] = x.remotehost
if not "config_file" in rconf:
rconf["config_file"] = os.path.join(os.path.dirname(sys.argv[0]), "conf/gsyncd_template.conf")
upgrade_config_file(rconf["config_file"])
gcnf = GConffile(rconf["config_file"], canon_peers, defaults.__dict__, opts.__dict__, namedict)
checkpoint_change = False
if confdata:
opt_ok = norm(confdata.opt) in tunables + [None]
if confdata.op == "check":
if opt_ok:
sys.exit(0)
else:
sys.exit(1)
elif not opt_ok:
raise GsyncdError("not a valid option: " + confdata.opt)
if confdata.op == "get":
gcnf.get(confdata.opt)
elif confdata.op == "set":
gcnf.set(confdata.opt, confdata.val, confdata.rx)
elif confdata.op == "del":
gcnf.delete(confdata.opt, confdata.rx)
# when modifying checkpoint, it's important to make a log
# of that, so in that case we go on to set up logging even
# if its just config invocation
if confdata.opt == "checkpoint" and confdata.op in ("set", "del") and not confdata.rx:
checkpoint_change = True
if not checkpoint_change:
return
gconf.__dict__.update(defaults.__dict__)
gcnf.update_to(gconf.__dict__)
gconf.__dict__.update(opts.__dict__)
gconf.configinterface = gcnf
delete = rconf.get("delete")
if delete:
logging.info("geo-replication delete")
# Delete pid file, status file, socket file
cleanup_paths = []
if getattr(gconf, "pid_file", None):
cleanup_paths.append(gconf.pid_file)
if getattr(gconf, "state_file", None):
cleanup_paths.append(gconf.state_file)
if getattr(gconf, "state_detail_file", None):
cleanup_paths.append(gconf.state_detail_file)
if getattr(gconf, "state_socket_unencoded", None):
cleanup_paths.append(gconf.state_socket_unencoded)
cleanup_paths.append(rconf["config_file"][:-11] + "*")
# Cleanup changelog working dirs
if getattr(gconf, "working_dir", None):
try:
shutil.rmtree(gconf.working_dir)
except (IOError, OSError):
if sys.exc_info()[1].errno == ENOENT:
pass
else:
raise GsyncdError("Error while removing working dir: %s" % gconf.working_dir)
for path in cleanup_paths:
# To delete temp files
for f in glob.glob(path + "*"):
_unlink(f)
return
if restricted and gconf.allow_network:
ssh_conn = os.getenv("SSH_CONNECTION")
if not ssh_conn:
# legacy env var
ssh_conn = os.getenv("SSH_CLIENT")
if ssh_conn:
allowed_networks = [IPNetwork(a) for a in gconf.allow_network.split(",")]
client_ip = IPAddress(ssh_conn.split()[0])
allowed = False
for nw in allowed_networks:
if client_ip in nw:
allowed = True
break
if not allowed:
raise GsyncdError("client IP address is not allowed")
ffd = rconf.get("feedback_fd")
if ffd:
fcntl.fcntl(ffd, fcntl.F_SETFD, fcntl.FD_CLOEXEC)
# normalize loglevel
lvl0 = gconf.log_level
if isinstance(lvl0, str):
lvl1 = lvl0.upper()
lvl2 = logging.getLevelName(lvl1)
# I have _never_ _ever_ seen such an utterly braindead
# error condition
if lvl2 == "Level " + lvl1:
raise GsyncdError('cannot recognize log level "%s"' % lvl0)
gconf.log_level = lvl2
if not privileged() and gconf.log_file_mbr:
gconf.log_file = gconf.log_file_mbr
if checkpoint_change:
try:
GLogger._gsyncd_loginit(log_file=gconf.log_file, label="conf")
if confdata.op == "set":
logging.info("checkpoint %s set" % confdata.val)
elif confdata.op == "del":
logging.info("checkpoint info was reset")
except IOError:
if sys.exc_info()[1].errno == ENOENT:
# directory of log path is not present,
# which happens if we get here from
# a peer-multiplexed "config-set checkpoint"
# (as that directory is created only on the
# original node)
pass
else:
raise
return
create = rconf.get("create")
if create:
if getattr(gconf, "state_file", None):
set_monitor_status(gconf.state_file, create)
return
go_daemon = rconf["go_daemon"]
be_monitor = rconf.get("monitor")
be_agent = rconf.get("agent")
rscs, local, remote = makersc(args)
status_get = rconf.get("status_get")
if status_get:
for brick in gconf.path:
brick_status = GeorepStatus(gconf.state_file, brick)
checkpoint_time = int(getattr(gconf, "checkpoint", "0"))
brick_status.print_status(checkpoint_time=checkpoint_time)
return
if not be_monitor and isinstance(remote, resource.SSH) and go_daemon == "should":
go_daemon = "postconn"
log_file = None
else:
log_file = gconf.log_file
if be_monitor:
label = "monitor"
elif be_agent:
label = "agent"
elif remote:
# master
label = gconf.local_path
else:
label = "slave"
startup(go_daemon=go_daemon, log_file=log_file, label=label)
resource.Popen.init_errhandler()
if be_agent:
os.setsid()
logging.debug("rpc_fd: %s" % repr(gconf.rpc_fd))
return agent(Changelog(), gconf.rpc_fd)
if be_monitor:
return monitor(*rscs)
logging.info("syncing: %s" % " -> ".join(r.url for r in rscs))
if remote:
go_daemon = remote.connect_remote(go_daemon=go_daemon)
if go_daemon:
startup(go_daemon=go_daemon, log_file=gconf.log_file)
# complete remote connection in child
remote.connect_remote(go_daemon="done")
local.connect()
if ffd:
os.close(ffd)
local.service_loop(*[r for r in [remote] if r])