コード例 #1
0
ファイル: fit.py プロジェクト: thegooglecodearchive/guiqwt
 def create_widgets(self, parent, refresh_callback):
     self._refresh_callback = refresh_callback
     self.prefix_label = QLabel()
     font = self.prefix_label.font()
     font.setPointSize(font.pointSize() + self._size_offset)
     self.prefix_label.setFont(font)
     self.button = QPushButton()
     self.button.setIcon(get_icon('settings.png'))
     self.button.setToolTip(
         _("Edit '%s' fit parameter properties") % self.name)
     QObject.connect(self.button, SIGNAL('clicked()'),
                     lambda: self.edit_param(parent))
     self.lineedit = QLineEdit()
     QObject.connect(self.lineedit, SIGNAL('editingFinished()'),
                     self.line_editing_finished)
     self.unit_label = QLabel(self.unit)
     self.slider = QSlider()
     self.slider.setOrientation(Qt.Horizontal)
     self.slider.setRange(0, self.steps - 1)
     QObject.connect(self.slider, SIGNAL("valueChanged(int)"),
                     self.slider_value_changed)
     self.update(refresh=False)
     self.add_widgets([
         self.prefix_label, self.lineedit, self.unit_label, self.slider,
         self.button
     ])
コード例 #2
0
ファイル: gui.py プロジェクト: thelegend831/ZephyrApp
    def __init__(self, parent, appdata):
        super(SessionInfos, self).__init__(parent)
        self.appdata = appdata
        self.setWindowTitle( 'Information for the session' )
        self.setFixedSize(250, 300)

        self.buttonBox = QDialogButtonBox( self )
        self.buttonBox.setOrientation( Qt.Horizontal )
        self.buttonBox.setStandardButtons( QDialogButtonBox.Cancel|QDialogButtonBox.Ok )

        labelcombo = QLabel( 'Breathing Zone:' )
        self.breathzone = QComboBox()
        self.breathzone.addItem( '', '' )
        self.breathzone.addItem( 'Abdominal', 1 )
        self.breathzone.addItem( 'Thoracic', 2 )

        self.breathzone.move(10, 10)

        labelnote = QLabel( 'Note:' )
        self.note = QTextEdit()

        layout = QVBoxLayout()
        layout.addWidget( self.create_SessionType_Group() )
        layout.addWidget( labelcombo )
        layout.addWidget( self.breathzone )
        layout.addWidget( labelnote )
        layout.addWidget( self.note )
        layout.addWidget( self.buttonBox )

        self.setLayout( layout )

        self.buttonBox.accepted.connect( self.accept )
        self.buttonBox.rejected.connect( self.reject )
コード例 #3
0
ファイル: FTIR.py プロジェクト: kbeyerlein/pyPumpProbe
    def __init__(self, parent):
        super(MakeNicerWidget, self).__init__(parent)

        self.data = np.array([])  # array which holds data

        # Time domain plot
        self.tdWidget = DockablePlotWidget(self, CurveWidget)
        self.tdWidget.calcFun.addFun('fs', lambda x: x, lambda x: x)
        self.tdWidget.calcFun.addFun('µm', lambda x: x * fsDelay * 1e3,
                                     lambda x: x / fsDelay * 1e-3)
        self.tdWidget.calcFun.addFun('mm', lambda x: x * fsDelay,
                                     lambda x: x / fsDelay)
        tdPlot = self.tdWidget.get_plot()
        self.tdSignal = SignalFT(self, plot=tdPlot)
        self.tdFit = SignalFT(self, plot=tdPlot, col='r')

        # Frequency domain plot
        self.fdWidget = DockablePlotWidget(self, CurveWidget)
        self.fdWidget.calcFun.addFun('PHz', lambda x: x, lambda x: x)
        self.fdWidget.calcFun.addFun('THz', lambda x: x * 1e3,
                                     lambda x: x * 1e-3)
        self.fdWidget.calcFun.addFun('µm', lambda x: c0 / x * 1e-9,
                                     lambda x: c0 / x * 1e-9)
        self.fdWidget.calcFun.addFun('eV', lambda x: x, lambda x: x)
        fdplot = self.fdWidget.get_plot()
        self.fdSignal = SignalFT(self, plot=fdplot)
        self.fdFit = SignalFT(self, plot=fdplot, col='r')

        self.smoothNum = QSpinBox()  # gives number of smoothin points
        self.smoothNum.setMinimum(1)
        self.smoothNum.setSingleStep(2)

        # Put things together in layouts
        buttonLayout = QGridLayout()
        plotLayout = QVBoxLayout()
        layout = QHBoxLayout()
        plotLayout.addWidget(self.tdWidget)
        plotLayout.addWidget(self.fdWidget)

        buttonLayout.addWidget(QLabel('Fitting function'), 0, 0)
        buttonLayout.addWidget(
            QLineEdit("lambda x,A,f,phi: np.sin(2*np.pi*f*x+phi)"), 1, 0, 1, 2)
        buttonLayout.addWidget(QLabel('Smooth'), 2, 0)
        buttonLayout.addWidget(self.smoothNum, 2, 1)
        buttonLayout.setRowStretch(3, 20)

        layout.addLayout(buttonLayout)
        layout.addLayout(plotLayout)
        self.setLayout(layout)

        # connect signals
        self.updateTdPlot.connect(self.tdSignal.updatePlot)
        self.updateTdFitPlot.connect(self.tdFit.updatePlot)
        self.updateFdPlot.connect(lambda data: self.fdSignal.updatePlot(
            self.fdSignal.computeFFT(data)))
        self.updateFdFitPlot.connect(
            lambda data: self.fdFit.updatePlot(self.fdFit.computeFFT(data)))
        self.smoothNum.valueChanged.connect(self.smoothData)

        self.setData()
コード例 #4
0
ファイル: fliprotate.py プロジェクト: gyenney/Tools
    def add_buttons_to_layout(self, layout):
        """Add tool buttons to layout"""
        # Image orientation
        angle_label = QLabel(_("Angle (°):"))
        layout.addWidget(angle_label)
        self.angle_combo = QComboBox(self)
        self.angle_combo.addItems(self.ROTATION_ANGLES)
        self.angle_combo.setCurrentIndex(1)
        self.angle_combo.currentIndexChanged.connect(
            lambda index: self.apply_transformation())
        layout.addWidget(self.angle_combo)
        layout.addSpacing(10)

        # Image flipping
        flip_label = QLabel(_("Flip:"))
        layout.addWidget(flip_label)
        hflip = create_toolbutton(
            self,
            text="",
            icon=get_icon("hflip.png"),
            toggled=lambda state: self.apply_transformation(),
            autoraise=False)
        self.hflip_btn = hflip
        layout.addWidget(hflip)
        vflip = create_toolbutton(
            self,
            text="",
            icon=get_icon("vflip.png"),
            toggled=lambda state: self.apply_transformation(),
            autoraise=False)
        self.vflip_btn = vflip
        layout.addWidget(vflip)
        layout.addSpacing(15)

        self.add_reset_button(layout)
コード例 #5
0
ファイル: _gui_tmp.py プロジェクト: BD75/mpsrad
    def __init__(self, parent):
        QSplitter.__init__(self, parent)
        self.parent = parent
        self.setContentsMargins(10, 10, 10, 10)
        self.setOrientation(Qt.Vertical)

        #		# Spectrometers in tabs
        self.tabs = SpectrometerTabs(self, ['AFFTS'])

        # Toolbar
        self.toolbar = ToolBar(parent.Icons)
        self.toolbar.setOrientation(Qt.Vertical)

        # Control panel (housekeeping)
        self.controlpanel = ControlPanel(self)

        # Status bar
        self.statusbar = QStatusBar()
        self.ActionIcon = QLabel(u"")
        self.ActionInfo = QLabel(u"")
        self.statusbar.addPermanentWidget(self.ActionIcon)
        self.statusbar.addPermanentWidget(self.ActionInfo, 1)
        self.addWidget(self.tabs)

        Hsplit = QSplitter()
        Hsplit.setOrientation(Qt.Horizontal)
        Hsplit.addWidget(self.toolbar)
        Hsplit.addWidget(self.controlpanel)
        self.addWidget(Hsplit)

        self.addWidget(self.statusbar)

        self.setSizes([2000, 1, 1, 1])
コード例 #6
0
ファイル: widgets.py プロジェクト: HaMF/bbfmr
    def __init__(self, parent=None):
        QWidget.__init__(self, parent)

        self.widget_layout = QVBoxLayout()

        title_layout = QHBoxLayout()
        title_layout.addStretch()
        style = "<span style=\'color: #444444\'><b>%s</b></span>"
        title = QLabel(style % "Operations")
        title_layout.addWidget(title)
        title_layout.addStretch()
        self.widget_layout.addLayout(title_layout)

        # Create ListWidget and add 10 items to move around.
        self.list_widget = QListWidget()

        # self.list_widget.setDragDropMode(QAbstractItemView.InternalMove)
        self.list_widget.setSelectionMode(QAbstractItemView.ExtendedSelection)
        self.list_widget.setSortingEnabled(False)
        self.list_widget.currentItemChanged.connect(self._populate_settings_update)
        self.widget_layout.addWidget(self.list_widget)

        otitle_layout = QHBoxLayout()
        otitle_layout.addStretch()
        otitle = QLabel(style % "Operation settings")
        otitle_layout.addWidget(otitle)
        otitle_layout.addStretch()
        self.widget_layout.addLayout(otitle_layout)

        self.operations_combo = QComboBox()
        self.operations_combo.currentIndexChanged.connect(self._populate_settings_add)
        self.widget_layout.addWidget(self.operations_combo)

        self.operation_settings = GenericOperationWidget()
        self.widget_layout.addWidget(self.operation_settings)

        self.toolbar = QToolBar()
        self.toolbar.addAction(get_icon('apply.png'), "Apply/Replace",
                               self._change_operation)
        self.toolbar.addAction(get_icon('editors/edit_add.png'), "Add after",
                               self._add_operation)
        self.toolbar.addAction(get_icon('trash.png'), "Remove",
                               self._remove_operation)


        self.widget_layout.addWidget(self.toolbar)
        self.setLayout(self.widget_layout)
コード例 #7
0
ファイル: qtwidgets.py プロジェクト: gyenney/Tools
 def __init__(self, item, parent_layout):
     AbstractDataSetWidget.__init__(self, item, parent_layout)
     self.group = QLabel()
     wordwrap = item.get_prop_value("display", "wordwrap", False)
     self.group.setWordWrap(wordwrap)
     self.group.setToolTip(item.get_help())
     self.group.setStyleSheet( LABEL_CSS )
     self.group.setTextInteractionFlags(Qt.TextSelectableByMouse)
コード例 #8
0
ファイル: configtools.py プロジェクト: mindw/guidata
def get_image_label(name, default="not_found.png"):
    """
    Construct a QLabel from the file with specified name
    name, default: filenames with extensions
    """
    label = QLabel()
    pixmap = QPixmap(get_image_file_path(name, default))
    label.setPixmap(pixmap)
    return label
コード例 #9
0
    def __init__(self, getIcon, *args, **kwargs):
        QStatusBar.__init__(self, *args, **kwargs)

        self.ActionIcon = QLabel(u"")
        self.ActionInfo = QLabel(u"")
        self.ActionInfo.setFixedWidth(200)
        self.StreamInfo = QLabel(u"")
        self.addPermanentWidget(self.ActionIcon)
        self.addPermanentWidget(self.ActionInfo)
        openIcon = QLabel(u"")
        openIcon.setPixmap(getIcon("arrow").pixmap(QSize(16, 16)))
        self.addPermanentWidget(openIcon)
        self.addPermanentWidget(self.StreamInfo, 1)

        self.getIcon = getIcon

        self._stdout = sys.stdout
        self._txtStream = io.StringIO()
        sys.stdout = self._txtStream
コード例 #10
0
ファイル: widgets.py プロジェクト: HaMF/bbfmr
    def __init__(self, parent=None,
                 tdms_file=None,
                 group_label="Data group",
                 channel_labels=["X channel",
                                 "Y channel",
                                 "Z channel",
                                 "Z2 channel",
                                 ]):
        """
        Params
        ======
        twin_z : bool
            Allow to select two Z (data) channels
        group_label : str:
            Label text for group combo box
        channel_labels : list of str
            Label texts for channel combo boxes
        """
        QWidget.__init__(self, parent)
        self.widget_layout = QVBoxLayout()

        self.group_widgets = []
        self.channel_widgets = []
        for i, label_text in enumerate([group_label] + channel_labels):
            label = QLabel(label_text)
            channel_widget = QComboBox()
            channel_widget.addItem(label_text)
            channel_widget.setMinimumWidth(250)
            channel_widget.setDisabled(True)
            
            group_widget = QComboBox()
            group_widget.addItem(label_text)
            group_widget.setMinimumWidth(250)
            group_widget.setDisabled(True)

            layout = QHBoxLayout()
            layout.addWidget(label)
            layout.addWidget(group_widget)
            if i != 0:
                layout.addWidget(channel_widget)
            self.widget_layout.addLayout(layout)

            if i == 0:
                self.group_combo = group_widget
                self.group_combo.currentIndexChanged.connect(self.change_sub_channels)
            else:
                self.group_widgets.append(group_widget)
                self.channel_widgets.append(channel_widget)

                group_widget.currentIndexChanged.connect(self._populate_channels)


        self.setLayout(self.widget_layout)

        self.tdms_file = tdms_file
コード例 #11
0
ファイル: qtitemwidgets.py プロジェクト: artillan/guidata
 def place_label(self, layout, row, column):
     """
     Place item label on layout at specified position (row, column)
     """
     label_text = self.item.get_prop_value("display", "label")
     unit = self.item.get_prop_value("display", "unit", '')
     if unit and not self.READ_ONLY:
         label_text += (' (%s)' % unit)
     self.label = QLabel(label_text)
     self.label.setToolTip(self.item.get_help())
     layout.addWidget(self.label, row, column)
コード例 #12
0
ファイル: guitest.py プロジェクト: mindw/guidata
    def __init__(self, parent):
        QWidget.__init__(self, parent)
        font = QFont(get_family(MONOSPACE), 10, QFont.Normal)

        info_icon = QLabel()
        icon = get_std_icon('MessageBoxInformation').pixmap(24, 24)
        info_icon.setPixmap(icon)
        info_icon.setFixedWidth(32)
        info_icon.setAlignment(Qt.AlignTop)
        self.desc_label = QLabel()
        self.desc_label.setWordWrap(True)
        self.desc_label.setAlignment(Qt.AlignTop)
        self.desc_label.setFont(font)
        group_desc = QGroupBox(_("Description"), self)
        layout = QHBoxLayout()
        layout.addWidget(info_icon)
        layout.addWidget(self.desc_label)
        group_desc.setLayout(layout)

        self.editor = CodeEditor(self)
        self.editor.setup_editor(linenumbers=True, font=font)
        self.editor.setReadOnly(True)
        group_code = QGroupBox(_("Source code"), self)
        layout = QVBoxLayout()
        layout.addWidget(self.editor)
        group_code.setLayout(layout)

        self.run_button = QPushButton(get_icon("apply.png"),
                                      _("Run this script"), self)
        self.quit_button = QPushButton(get_icon("exit.png"), _("Quit"), self)
        hlayout = QHBoxLayout()
        hlayout.addWidget(self.run_button)
        hlayout.addStretch()
        hlayout.addWidget(self.quit_button)

        vlayout = QVBoxLayout()
        vlayout.addWidget(group_desc)
        vlayout.addWidget(group_code)
        vlayout.addLayout(hlayout)
        self.setLayout(vlayout)
コード例 #13
0
ファイル: fileui.py プロジェクト: BenMoon/LabSoft
    def __init__(self, parent):
        super(FileUi, self).__init__(Qt.Vertical, parent)

        layoutWidget = QWidget()
        layout = QVBoxLayout()
        layoutWidget.setLayout(layout)

        self.comment = QPlainTextEdit()
        self.fileName = None
        self.saveTxtCheck = QCheckBox('Save Txt')
        self.saveHdfCheck = QCheckBox('Save HDF5')
        self.saveTxtBtn = QPushButton('Save Txt')
        self.saveHdfBtn = QPushButton('Save HDF5')

        #############
        # stream group
        streamGroup = QGroupBox('Stream data to file:')
        streamGroup.setFlat(True)
        streamGroupLayout = QHBoxLayout()
        streamGroupLayout.addWidget(self.saveTxtCheck)
        streamGroupLayout.addWidget(self.saveHdfCheck)
        streamGroup.setLayout(streamGroupLayout)

        ##############
        # save static file
        saveGroup = QGroupBox('Save now to file:')
        saveGroup.setFlat(True)
        saveGroupLayout = QHBoxLayout()
        saveGroupLayout.addWidget(self.saveTxtBtn)
        saveGroupLayout.addWidget(self.saveHdfBtn)
        saveGroup.setLayout(saveGroupLayout)

        ##############
        # put layout together
        layout.addWidget(QLabel('Comment:'))
        layout.addWidget(self.comment)
        layout.addWidget(streamGroup)
        layout.addWidget(saveGroup)
        self.addWidget(layoutWidget)

        ##############
        # connnect stuff for functionality
        self.saveTxtCheck.stateChanged.connect(self.__makeFileName)
        self.saveHdfCheck.stateChanged.connect(self.__makeFileName)

        ##############
        # thread for streaming data to file
        #self.updateCurrPos.connect(self.__updateCurrPos)
        self.stream_thread = QThread()  # create the QThread
        self.stream_thread.start()
        self.stream_worker = GenericWorker(self.__streamFile)
        self.stream_worker.moveToThread(self.stream_thread)
コード例 #14
0
ファイル: qtwidgets.py プロジェクト: gyenney/Tools
 def __init__(self, label, klass, wordwrap=False, **kwargs):
     QGroupBox.__init__(self, label)
     self.klass = klass
     self.dataset = klass(**kwargs)
     self.layout = QVBoxLayout()
     if self.dataset.get_comment():
         label = QLabel(self.dataset.get_comment())
         label.setWordWrap(wordwrap)
         self.layout.addWidget(label)
     self.grid_layout = QGridLayout()
     self.layout.addLayout(self.grid_layout)
     self.setLayout(self.layout)
     self.edit = self.get_edit_layout()
コード例 #15
0
ファイル: widgets.py プロジェクト: HaMF/bbfmr
    def __init__(self, parent=None):
        QWidget.__init__(self, parent)
        self.layout = QHBoxLayout()
        self.widgets = []
        for i, label_text in enumerate(["start", "stop", "step"]):
            label = QLabel(label_text)
            argument_widget = QLineEdit()

            self.layout.addWidget(label)
            self.layout.addWidget(argument_widget)
            self.widgets.append(argument_widget)
        self.setLayout(self.layout)
        self.slice = slice(None)
コード例 #16
0
ファイル: configtools.py プロジェクト: mindw/guidata
def get_image_layout(imagename, text="", tooltip="", alignment=Qt.AlignLeft):
    """
    Construct a QHBoxLayout including image from the file with specified name,
    left-aligned text [with specified tooltip]
    Return (layout, label)
    """
    layout = QHBoxLayout()
    if alignment in (Qt.AlignCenter, Qt.AlignRight):
        layout.addStretch()
    layout.addWidget(get_image_label(imagename))
    label = QLabel(text)
    label.setToolTip(tooltip)
    layout.addWidget(label)
    if alignment in (Qt.AlignCenter, Qt.AlignLeft):
        layout.addStretch()
    return (layout, label)    
コード例 #17
0
    def __init__(self,
                 instance,
                 icon='',
                 parent=None,
                 apply=None,
                 wordwrap=True,
                 size=None):
        QDialog.__init__(self, parent)
        self.wordwrap = wordwrap
        self.apply_func = apply
        self.layout = QVBoxLayout()
        if instance.get_comment():
            label = QLabel(instance.get_comment())
            label.setWordWrap(wordwrap)
            self.layout.addWidget(label)
        self.instance = instance
        self.edit_layout = []

        self.setup_instance(instance)

        if apply is not None:
            apply_button = QDialogButtonBox.Apply
        else:
            apply_button = QDialogButtonBox.NoButton
        bbox = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Cancel
                                | apply_button)
        self.bbox = bbox
        bbox.accepted.connect(self.accept)
        bbox.rejected.connect(self.reject)
        bbox.clicked.connect(self.button_clicked)
        self.layout.addWidget(bbox)

        self.setLayout(self.layout)

        if parent is None:
            if not isinstance(icon, QIcon):
                icon = get_icon(icon, default="guidata.svg")
            self.setWindowIcon(icon)

        self.setModal(True)
        self.setWindowTitle(instance.get_title())

        if size is not None:
            if isinstance(size, QSize):
                self.resize(size)
            else:
                self.resize(*size)
コード例 #18
0
   def __init__(self, parent):
      super(controlWidget, self).__init__()

      self.widgetTimer = QTimer()
      self.widgetTimer.start(100)
      self.widgetTimer.timeout.connect(self.createNewDspWidgets)
      self.value =0
      self.flag = True
      
      self.mainApp = parent
      self.inactivityTimeout = True

      self.setWindowTitle('Live Telemetry Visualizer')

      self.qbtn = QPushButton('Quit', self)
      self.qbtn.clicked.connect(self.mainApp.quit)
      self.qbtn.resize(self.qbtn.sizeHint())
      self.qbtn.hide()

      qbtn1 = QPushButton('Check Performance status')
      qbtn1.clicked.connect(self.ButtonPressed)
      qbtn1.resize(qbtn1.sizeHint())

      self.performance_status = QLabel("If Performance Curve at Monitor Mic is On turn it Off")
      self.performance_status.hide()

      
      icheck = QCheckBox('Inactivity Timeout')
      icheck.stateChanged.connect(self.toggleInactivity)
      icheck.setChecked(self.inactivityTimeout)

      layout = QVBoxLayout()
      self.setLayout(layout)
      layout.addWidget(self.qbtn)
      layout.addWidget(self.performance_status)
      layout.addWidget(qbtn1)
      layout.addWidget(icheck)
      layout.addWidget(QWidget())

      self.resize(180, 100)
      self.show()
コード例 #19
0
ファイル: qthelpers.py プロジェクト: mindw/guidata
 def __init__(self, parent):
     QWidget.__init__(self, parent)
     layout = QHBoxLayout()
     row_nb = 14
     cindex = 0
     for child in dir(QStyle):
         if child.startswith('SP_'):
             if cindex == 0:
                 col_layout = QVBoxLayout()
             icon_layout = QHBoxLayout()
             icon = get_std_icon(child)
             label = QLabel()
             label.setPixmap(icon.pixmap(32, 32))
             icon_layout.addWidget(label)
             icon_layout.addWidget(QLineEdit(child.replace('SP_', '')))
             col_layout.addLayout(icon_layout)
             cindex = (cindex + 1) % row_nb
             if cindex == 0:
                 layout.addLayout(col_layout)
     self.setLayout(layout)
     self.setWindowTitle('Standard Platform Icons')
     self.setWindowIcon(get_std_icon('TitleBarMenuButton'))
コード例 #20
0
ファイル: qtwidgets.py プロジェクト: gyenney/Tools
    def setup_instance(self, instance):
        """Override DataSetEditDialog method"""
        from guidata.dataset.datatypes import DataSetGroup
        assert isinstance(instance, DataSetGroup)
        tabs = QTabWidget()
#        tabs.setUsesScrollButtons(False)
        self.layout.addWidget(tabs)
        for dataset in instance.datasets:
            layout = QVBoxLayout()
            layout.setAlignment(Qt.AlignTop)
            if dataset.get_comment():
                label = QLabel(dataset.get_comment())
                label.setWordWrap(self.wordwrap)
                layout.addWidget(label)
            grid = QGridLayout()
            self.edit_layout.append( self.layout_factory(dataset, grid) )
            layout.addLayout(grid)
            page = QWidget()
            page.setLayout(layout)
            if dataset.get_icon():
                tabs.addTab( page, get_icon(dataset.get_icon()),
                             dataset.get_title() )
            else:
                tabs.addTab( page, dataset.get_title() )
コード例 #21
0
    def __init__(self, parent):
        QWidget.__init__(self, parent)
        font = QFont(get_family(MONOSPACE), 10, QFont.Normal)

        info_icon = QLabel()
        icon = get_std_icon('MessageBoxInformation').pixmap(24, 24)
        info_icon.setPixmap(icon)
        info_icon.setFixedWidth(32)
        info_icon.setAlignment(Qt.AlignTop)

        self.service_status_label = QLabel()
        self.service_status_label.setWordWrap(True)
        self.service_status_label.setAlignment(Qt.AlignTop)
        self.service_status_label.setFont(font)

        self.desc_label = QLabel()
        self.desc_label.setWordWrap(True)
        self.desc_label.setAlignment(Qt.AlignTop)
        self.desc_label.setFont(font)

        self.group_desc = QGroupBox("Description", self)
        layout = QHBoxLayout()
        layout.addWidget(info_icon)
        layout.addWidget(self.desc_label)
        layout.addStretch()
        layout.addWidget(self.service_status_label)

        self.group_desc.setLayout(layout)

        self.editor = CodeEditor(self)
        self.editor.setup_editor(linenumbers=True, font=font)
        self.editor.setReadOnly(False)
        self.group_code = QGroupBox("Source code", self)
        layout = QVBoxLayout()
        layout.addWidget(self.editor)
        self.group_code.setLayout(layout)

        self.enable_button = QPushButton(get_icon("apply.png"), "Enable", self)

        self.save_button = QPushButton(get_icon("filesave.png"), "Save", self)

        self.disable_button = QPushButton(get_icon("delete.png"), "Disable",
                                          self)

        self.refresh_button = QPushButton(get_icon("restart.png"), "Refresh",
                                          self)
        hlayout = QHBoxLayout()
        hlayout.addWidget(self.save_button)
        hlayout.addWidget(self.enable_button)
        hlayout.addWidget(self.disable_button)
        hlayout.addWidget(self.refresh_button)

        vlayout = QVBoxLayout()
        vlayout.addWidget(self.group_desc)
        vlayout.addWidget(self.group_code)
        self.html_window = HTMLWindow()
        vlayout.addWidget(self.html_window)

        vlayout.addLayout(hlayout)
        self.setLayout(vlayout)

        self.current_file = None
コード例 #22
0
ファイル: widgets.py プロジェクト: HaMF/bbfmr
    def _set_widgets(self):
        """
        Parse operation (function arguments) and create widgets according to
        the function annotations. Fill with default or current argument values
        and display the widgets.
        """
        self._clear_widgets()

        # Retreive operation (function detail), instantiate neccesary widgets
        package, fun = self._op["module"].rsplit('.', 1)
        module = import_module(package)
        self._op["function"] = getattr(module, fun)
        argspec = inspect.getfullargspec(self._op["function"])

        # Create widgets
        self._labels = []
        self._widgets = []
        self._none_checkbox_widgets = []
        for par_name, annotation in sorted(argspec.annotations.items()):
            label = QLabel(par_name)
            font = qtgui.QFont()
            font.setPointSize(10)
            label.setFont(font)

            # find associated widget and functions
            mapping = {}
            if "widget" in annotation:
                mapping["widget"] = widget = getattr(qtgui, annotation["widget"])
                mapping["display_func"] = annotation["display_func"]
                mapping["display_conversion"] = annotation["display_conversion"]
                mapping["get_func"] = annotation["get_func"]
            elif "type" in annotation:
                try:
                    mapping = dict(GenericOperationWidget.type_mapping[annotation["type"]])
                except KeyError:
                    print("Can't find wiget for type: {type} for parameter " +
                          "{par_name}".format(type=annotation["type"], par_name=par_name))
                    continue
            else:
                continue

            # instanciate widget and make display_function callable
            widget = mapping["widget"]()
            if not callable(mapping["display_func"]):
                mapping["display_func"] = widget.__getattribute__(mapping["display_func"])

            # save mapping and parameter name for later use
            widget.mapping = mapping
            widget.par_name = par_name

            # create checkbox to allow not to set this parameter
            checkbox = QCheckBox()
            checkbox.setChecked(True)
            checkbox.setToolTip("Set the \"%s\" parameter. If unchecked, the default value is used." % par_name)
            checkbox.par_name = widget.par_name

            # Set value of widget according to parameters of the operation
            try:
                if "display_conversion" in mapping:
                    display_value = mapping["display_conversion"](self._op["kwargs"][par_name])    
                else:
                    display_value = self._op["kwargs"][par_name]
                mapping["display_func"](display_value)
            except KeyError:
                checkbox.setChecked(False)
            
            self._labels.append(label)
            self._widgets.append(widget)
            self._none_checkbox_widgets.append(checkbox)

        # Add widgets to layout
        if not self._widgets:
            self.widget_layout.addWidget(QLabel("No operation parameters"))
        for i, widget in enumerate(self._widgets):
            self.widget_layout.addWidget(self._labels[i])
            self.widget_layout.addWidget(self._widgets[i])
            self.widget_layout.addWidget(self._none_checkbox_widgets[i])
コード例 #23
0
    def __init__(self, parent, new_size, old_size, text="",
                 keep_original_size=False):
        QDialog.__init__(self, parent)
        
        intfunc = lambda tup: [int(val) for val in tup]
        if intfunc(new_size) == intfunc(old_size):
            self.keep_original_size = True
        else:
            self.keep_original_size = keep_original_size
        self.width, self.height = new_size
        self.old_width, self.old_height = old_size
        self.ratio = self.width/self.height

        layout = QVBoxLayout()
        self.setLayout(layout)
        
        formlayout = QFormLayout()
        layout.addLayout(formlayout)
        
        if text:
            label = QLabel(text)
            label.setAlignment(Qt.AlignHCenter)
            formlayout.addRow(label)
        
        self.w_edit = w_edit = QLineEdit(self)
        w_valid = QIntValidator(w_edit)
        w_valid.setBottom(1)
        w_edit.setValidator(w_valid)
                     
        self.h_edit = h_edit = QLineEdit(self)
        h_valid = QIntValidator(h_edit)
        h_valid.setBottom(1)
        h_edit.setValidator(h_valid)
        
        zbox = QCheckBox(_("Original size"), self)

        formlayout.addRow(_("Width (pixels)"), w_edit)
        formlayout.addRow(_("Height (pixels)"), h_edit)
        formlayout.addRow('', zbox)
        
        formlayout.addRow(_("Original size:"), QLabel("%d x %d" % old_size))
        self.z_label = QLabel()
        formlayout.addRow(_("Zoom factor:"), self.z_label)
        
        # Button box
        self.bbox = bbox = QDialogButtonBox(QDialogButtonBox.Ok|
                                            QDialogButtonBox.Cancel)
        bbox.accepted.connect(self.accept)
        bbox.rejected.connect(self.reject)
        layout.addWidget(bbox)

        self.w_edit.setText(str(self.width))
        self.h_edit.setText(str(self.height))
        self.update_widgets()
        
        self.setWindowTitle(_("Resize"))
        
        w_edit.textChanged.connect(self.width_changed)
        h_edit.textChanged.connect(self.height_changed)
        zbox.toggled.connect(self.toggled_no_zoom)
        zbox.setChecked(self.keep_original_size)
コード例 #24
0
ファイル: greatEyes.py プロジェクト: BenMoon/LabSoft
    def __init__(self, parent):
        super().__init__(parent)

        self.camera = None
        self.cameraSettings = None
        self.aquireData = False
        self.directory = 'N:/4all/mpsd_drive/xtsfasta/Data'

        layoutWidget = QWidget()
        layout = QGridLayout()
        layoutWidget.setLayout(layout)

        ###############
        # GUI elements
        self.openCamBtn = QPushButton('Connect camera')
        self.startAquBtn = QPushButton('Start aquisiton')
        self.readoutSpeedCombo = QComboBox()
        # this really should not be hard coded but received from dll
        self.readoutSpeedCombo.addItems(["1 MHz", 
            "1.8 MHz",
            "2.3 MHz",
            "2.8 MHz",
            "250 kHz",
            "500 kHz"])
        self.exposureTimeSpin = QSpinBox()
        self.exposureTimeSpin.setRange(1, 1e6)
        self.exposureTimeSpin.setValue(1e3) # default exposure 1s
        self.exposureTimeSpin.setSingleStep(100)
        self.exposureTimeSpin.setSuffix(' ms')
        #self.exposureTimeSpin.setValidator(QIntValidator(1, 2**31)) # ms
        self.binningXCombo = QComboBox()
        self.binningXCombo.addItems(["No binning",
                  "Binning of 2 columns",
                  "Binning of 4 columns",
                  "Binning of 8 columns",
                  "Binning of 16 columns",
                  "Binning of 32 columns",
                  "Binning of 64 columns",
                  "Binning of 128 columns",
                  "Full horizontal binning"])
        self.binningYCombo = QComboBox()
        self.binningYCombo.addItems(["No binning",
                  "Binning of 2 lines",
                  "Binning of 4 lines",
                  "Binning of 8 lines",
                  "Binning of 16 lines",
                  "Binning of 32 lines",
                  "Binning of 64 lines",
                  "Binning of 128 lines",
                  "Binning of 256 lines"])
        self.temperatureSpin = QSpinBox()
        self.temperatureSpin.setRange(-100, 20)
        self.temperatureSpin.setValue(-10)
        self.temperatureSpin.setSuffix('°C')
        self.updateInterSpin = QSpinBox()
        self.updateInterSpin.setRange(1, 3600)
        self.updateInterSpin.setValue(5)
        self.updateInterSpin.setSuffix(' s')
        #self.updateInterSpin.setText("2")
        #self.updateInterEdit.setValidator(QIntValidator(1, 3600))
        self.loi = QSpinBox()
        self.loi.setRange(1, 511) # one pixel less as the camera has
        self.deltaPixels = QSpinBox()
        self.deltaPixels.setRange(0, 256)
        self.autoSave = QCheckBox("Auto save")
        self.getDirectory = QPushButton('Choose Dir')
        self.dirPath = QLineEdit(self.directory)
        self.comment = QPlainTextEdit()

        ##############
        # put elements in layout
        layout.addWidget(self.openCamBtn, 0, 0)
        layout.addWidget(self.startAquBtn, 0, 1)
        layout.addWidget(QLabel('readout speed'), 1, 0)
        layout.addWidget(self.readoutSpeedCombo, 1, 1)
        layout.addWidget(QLabel('exposure time'), 2, 0)
        layout.addWidget(self.exposureTimeSpin, 2, 1)
        layout.addWidget(QLabel('binning X'), 3, 0)
        layout.addWidget(self.binningXCombo, 3, 1)
        layout.addWidget(QLabel('binning Y'), 4, 0)
        layout.addWidget(self.binningYCombo, 4, 1)
        layout.addWidget(QLabel('temperature'), 5, 0)
        layout.addWidget(self.temperatureSpin, 5, 1)
        layout.addWidget(QLabel('update every n-seconds'), 6, 0)
        layout.addWidget(self.updateInterSpin, 6, 1)
        layout.addWidget(QLabel('Pixel of interest'), 7, 0)
        layout.addWidget(self.loi, 7, 1)
        layout.addWidget(QLabel('Δ pixels'), 8, 0)
        layout.addWidget(self.deltaPixels, 8, 1)
        layout.addWidget(self.autoSave, 9, 1)
        layout.addWidget(self.getDirectory, 10, 0)
        layout.addWidget(self.dirPath, 10, 1)
        layout.addWidget(QLabel('Comment:'), 11, 0)
        layout.addWidget(self.comment, 12, 0, 1, 2)
        layout.setRowStretch(13, 10)

        self.addWidget(layoutWidget)


        #################
        # connect elements for functionality
        self.openCamBtn.released.connect(self.__openCam)
        self.getDirectory.released.connect(self.__chooseDir)
        self.temperatureSpin.valueChanged.connect(self.__setTemperature)
        self.exposureTimeSpin.valueChanged.connect(self.__setCamParameter)
        self.readoutSpeedCombo.currentIndexChanged.connect(self.__setCamParameter)
        self.startAquBtn.released.connect(self.__startCurrImageThr)
        
        ################
        # thread for updating position
        self.currImage_thread = QThread() # create the QThread
        self.currImage_thread.start()

        # This causes my_worker.run() to eventually execute in my_thread:
        self.currImage_worker = GenericWorker(self.__getCurrImage)
        self.currImage_worker.moveToThread(self.currImage_thread)
 
        self.startAquBtn.setEnabled(False) 
        self.readoutSpeedCombo.setEnabled(False)
        self.exposureTimeSpin.setEnabled(False)
        self.binningXCombo.setEnabled(False)
        self.binningYCombo.setEnabled(False)
        self.temperatureSpin.setEnabled(False)
        self.updateInterSpin.setEnabled(False)
コード例 #25
0
ファイル: tiepie.py プロジェクト: kbeyerlein/pyPumpProbe
    def __init__(self, parent):
        #super(ObjectFT, self).__init__(Qt.Vertical, parent)
        super().__init__(parent)

        self.scp = None  # variable to hold oscilloscope object
        self.mutex = QMutex()

        layoutWidget = QWidget()
        layout = QGridLayout()
        layoutWidget.setLayout(layout)

        self.openDevBtn = QPushButton('Open Osci')
        # channel stuff
        self.measCh = QComboBox()
        self.chSens = QComboBox()
        self.triggCh = QComboBox()
        self.frequency = QLineEdit()
        self.frequency.setValidator(QIntValidator())
        self.recordLen = QLineEdit()
        self.recordLen.setValidator(QIntValidator())
        self.delay = QLineEdit()
        self.delay.setValidator(QDoubleValidator())
        # trigger stuff
        self.triggLevel = QLineEdit()
        self.triggLevel.setToolTip(
            'http://api.tiepie.com/libtiepie/0.5/triggering_scpch.html#triggering_scpch_level'
        )
        self.triggLevel.setText(
            '0.5'
        )  # init value otherwise there's trouble with signal changing index of sensitivity
        self.triggLevel.setValidator(QDoubleValidator(0., 1., 3))
        self.hystereses = QLineEdit()
        self.hystereses.setText('0.05')
        self.hystereses.setToolTip(
            'http://api.tiepie.com/libtiepie/0.5/triggering_scpch.html#triggering_scpch_hysteresis'
        )
        self.hystereses.setValidator(QDoubleValidator(0., 1., 3))
        self.triggKind = QComboBox()
        # do averages
        self.averages = QSpinBox()
        self.averages.setValue(1)
        self.averages.setRange(1, 10000)

        # put layout together
        layout.addWidget(self.openDevBtn, 0, 0)
        layout.addWidget(QLabel('Measuring Ch'), 1, 0)
        layout.addWidget(self.measCh, 1, 1)
        layout.addWidget(QLabel('Ch sensitivity'), 2, 0)
        layout.addWidget(self.chSens, 2, 1)
        layout.addWidget(QLabel('Sample freq. (kHz)'), 3, 0)
        layout.addWidget(self.frequency, 3, 1)
        layout.addWidget(QLabel('Record length'), 4, 0)
        layout.addWidget(self.recordLen, 4, 1)
        layout.addWidget(QLabel('Delay'), 5, 0)
        layout.addWidget(self.delay, 5, 1)
        layout.addWidget(QLabel('Trigger Ch'), 6, 0)
        layout.addWidget(self.triggCh, 6, 1)
        layout.addWidget(QLabel('Trigger Level (%)'), 7, 0)
        layout.addWidget(self.triggLevel, 7, 1)
        layout.addWidget(QLabel('Hystereses'), 8, 0)
        layout.addWidget(self.hystereses, 8, 1)
        layout.addWidget(QLabel('Trigger kind'), 9, 0)
        layout.addWidget(self.triggKind, 9, 1)
        layout.addWidget(QLabel('Averages'), 10, 0)
        layout.addWidget(self.averages, 10, 1)
        layout.setRowStretch(11, 10)
        layout.setColumnStretch(2, 10)

        self.addWidget(layoutWidget)

        # connect UI to get things working
        self.openDevBtn.released.connect(self.openDev)
        self.chSens.currentIndexChanged.connect(self._changeSens)
        self.frequency.returnPressed.connect(self._changeFreq)
        self.recordLen.returnPressed.connect(self._changeRecordLength)
        self.triggCh.currentIndexChanged.connect(self._changeTrigCh)
        self.triggLevel.returnPressed.connect(self._triggLevelChanged)
        self.triggLevel.textChanged.connect(self._check_state)
        self.hystereses.returnPressed.connect(self._setHystereses)
        self.hystereses.textChanged.connect(self._check_state)
コード例 #26
0
    def __init__(self, parent):
        #super(ObjectFT, self).__init__(Qt.Vertical, parent)
        super().__init__(parent)

        self.meter = None
        self.collectData = True # bool for data collection thread
        self.avgData = Queue() # need data for averaging and set for holding all
        self.measure = False
        self.runDataThr = True
        self.measureData = []
        self.startTime = None


        layoutWidget = QWidget()
        layout = QGridLayout()
        layoutWidget.setLayout(layout)

        ##############
        # gui elements
        self.ipEdit = QLineEdit()
        rx = QRegExp("^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]).){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$")
        self.ipEdit.setValidator(QRegExpValidator(rx))
        self.ipEdit.setText('127.0.0.1')
        self.portEdit = QLineEdit()
        self.portEdit.setValidator(QIntValidator(1, 65535, self))
        self.portEdit.setText('5000')
        self.connectBtn = QPushButton('Connect')
        self.avgSpin = QSpinBox()
        self.avgSpin.setValue(1)
        self.avgSpin.setRange(1, 10000)
        self.currValDisp = QLabel('0.0')
        self.startMeasBtn = QPushButton('Start aq')
        self.stopMeasBtn  = QPushButton('Stop aq')

        ##############
        # put layout together
        layout.addWidget(QLabel('IP Address:'), 0, 0)
        layout.addWidget(self.ipEdit, 1, 0)
        layout.addWidget(QLabel('Port:'), 0, 1)
        layout.addWidget(self.portEdit, 1, 1)
        layout.addWidget(self.connectBtn, 2, 1)
        layout.addWidget(QLabel('Averages'), 4, 0)
        layout.addWidget(self.avgSpin, 5, 0)
        layout.addWidget(self.currValDisp, 5, 1)
        layout.addWidget(self.startMeasBtn, 6, 0)
        layout.addWidget(self.stopMeasBtn, 6, 1)
        layout.setRowStretch(7, 10)
        self.addWidget(layoutWidget)

        ##############
        # Network stuff
        self.tcpClient = QtNetwork.QTcpSocket()
        self.tcpClient.readyRead.connect(self.__getSocketData)
        self.tcpClient.error.connect(lambda x: print(x))

        ##############
        # make button and stuff functional
        self.connectBtn.released.connect(self.connectMeter)
        self.avgSpin.valueChanged.connect(self.changeAverage)
        self.startMeasBtn.released.connect(self._startMeasure)
        self.stopMeasBtn.released.connect(self._stopMeasure)

        ##############
        # thread for getting data from socket
        self.updateAvgTxt.connect(self.__updateAvgTxt)
        self.dataAq_Thr = QThread()
        self.dataAq_Thr.start()
        self.dataAq_worker = GenericWorker(self.__getData)
        self.dataAq_worker.moveToThread(self.dataAq_Thr)
コード例 #27
0
    def __init__(self, parent):
        #super(ObjectFT, self).__init__(Qt.Vertical, parent)
        super().__init__(parent)

        self.stage = None
        self.offset = 0.  # offset from 0 where t0 is (mm)
        self.newOff = 0.
        self.stageRange = (0, 0)

        layoutWidget = QWidget()
        layout = QGridLayout()
        layoutWidget.setLayout(layout)

        # put layout together
        self.openStageBtn = QPushButton("Open stage")
        self.initStageBtn = QPushButton("Init stage")

        #absolute move
        #current position
        self.currentPos = QLabel('')
        #self.currentPos.setValidator(QDoubleValidator())
        #relative move (mm)
        self.deltaMove_mm = QLineEdit()
        self.deltaMove_mm.setText('0')
        self.deltaMove_mm.setValidator(QDoubleValidator())
        self.deltaMovePlus_mm = QPushButton('+')
        self.deltaMoveMinus_mm = QPushButton('-')
        #relative move (fs)
        self.deltaMove_fs = QLineEdit()
        self.deltaMovePlus_fs = QPushButton('+')
        self.deltaMoveMinus_fs = QPushButton('-')
        #velocity
        self.velocityLabel = QLabel('Velocity:')
        self.velocity = QSlider(Qt.Horizontal)
        self.velocity.setMinimum(0)
        self.velocity.setMaximum(
            2000)  # unit in µm; TODO: try to get max vel. from controller

        # scan from (fs)
        self.scanFrom = QLineEdit()
        self.scanFrom.setText('-100')
        self.scanFrom.setValidator(QIntValidator())
        # scan to (fs)
        self.scanTo = QLineEdit()
        self.scanTo.setText('100')
        self.scanTo.setValidator(QIntValidator())
        # scan stepsize (fs)
        self.scanStep = QLineEdit()
        self.scanStep.setText('10')
        self.scanStep.setValidator(QDoubleValidator())
        # center here button
        self.centerBtn = QPushButton('Center here')
        self.centerBtn.setToolTip('Center scan at current stage position')
        self.startScanBtn = QPushButton("Start scan")
        self.stopScanBtn = QPushButton("Stop scan")
        self.niceBtn = QPushButton('Make it nice')
        # spacer line
        hLine = QFrame()
        hLine.setFrameStyle(QFrame.HLine)
        hLine.setSizePolicy(QSizePolicy.Minimum, QSizePolicy.Expanding)

        # put layout together
        layout.addWidget(self.openStageBtn, 0, 0)
        layout.addWidget(self.initStageBtn, 0, 1)
        layout.addWidget(QLabel("Current pos (mm):"), 1, 0)
        layout.addWidget(self.currentPos, 1, 1)
        layout.addWidget(self.velocityLabel, 2, 0)
        layout.addWidget(self.velocity, 3, 0, 1, 2)
        layout.addWidget(QLabel('Move relative (mm)'), 4, 0)
        layout.addWidget(self.deltaMove_mm, 5, 0, 1, 2)
        layout.addWidget(self.deltaMoveMinus_mm, 6, 0)
        layout.addWidget(self.deltaMovePlus_mm, 6, 1)
        layout.addWidget(QLabel('Move relative (fs)'), 7, 0)
        layout.addWidget(self.deltaMove_fs, 8, 0, 1, 2)
        layout.addWidget(self.deltaMoveMinus_fs, 9, 0)
        layout.addWidget(self.deltaMovePlus_fs, 9, 1)

        layout.addWidget(hLine, 10, 0, 1, 2)
        layout.addWidget(QLabel('Scan from (fs)'), 11, 0)
        layout.addWidget(self.scanFrom, 11, 1)
        layout.addWidget(QLabel('Scan to (fs)'), 12, 0)
        layout.addWidget(self.scanTo, 12, 1)
        layout.addWidget(QLabel('Stepsize (fs)'), 13, 0)
        layout.addWidget(self.scanStep, 13, 1)
        layout.addWidget(self.startScanBtn, 14, 0)
        layout.addWidget(self.stopScanBtn, 14, 1)
        layout.addWidget(self.centerBtn, 15, 1)
        layout.addWidget(self.niceBtn, 16, 1)
        layout.setRowStretch(17, 10)
        layout.setColumnStretch(2, 10)

        self.addWidget(layoutWidget)

        # make button and stuff functional
        self.openStageBtn.released.connect(self.connectStage)
        self.initStageBtn.released.connect(self.initStage)
        self.scanFrom.returnPressed.connect(self._xAxeChanged)
        self.scanTo.returnPressed.connect(self._xAxeChanged)
        self.centerBtn.released.connect(self._centerHere)
        self.deltaMovePlus_mm.released.connect(
            lambda x=1: self.moveRel_mm(float(self.deltaMove_mm.text())))
        self.deltaMoveMinus_mm.released.connect(
            lambda x=-1: self.moveRel_mm(float(self.deltaMove_mm.text()), x))

        ################
        # thread for updating position
        #self.currPosThr = GenericThread(self.__getCurrPos)
        self.updateCurrPos.connect(self.__updateCurrPos)
        self.currPos_thread = QThread()  # create the QThread
        self.currPos_thread.start()

        # This causes my_worker.run() to eventually execute in my_thread:
        self.currPos_worker = GenericWorker(self.__getCurrPos)
        self.currPos_worker.moveToThread(self.currPos_thread)