def showHelp(cls):
print("GuruxDlmsSample reads data from the DLMS/COSEM device.")
print("GuruxDlmsSample -h [Meter IP Address] -p [Meter Port No] -c 16 -s 1 -r SN")
print(" -h \t host name or IP address.")
print(" -p \t port number or name (Example: 1000).")
print(" -S \t serial port.")
print(" -i IEC is a start protocol.")
print(" -a \t Authentication (None, Low, High).")
print(" -P \t Password for authentication.")
print(" -c \t Client address. (Default: 16)")
print(" -s \t Server address. (Default: 1)")
print(" -n \t Server address as serial number.")
print(" -r [sn, sn]\t Short name or Logican Name (default) referencing is used.")
print(" -w WRAPPER profile is used. HDLC is default.")
print(" -t [Error, Warning, Info, Verbose] Trace messages.")
print(" -g \"0.0.1.0.0.255:1; 0.0.1.0.0.255:2\" Get selected object(s) with given attribute index.")
print("Example:")
print("Read LG device using TCP/IP connection.")
print("GuruxDlmsSample -r SN -c 16 -s 1 -h [Meter IP Address] -p [Meter Port No]")
print("Read LG device using serial port connection.")
print("GuruxDlmsSample -r SN -c 16 -s 1 -sp COM1 -i")
print("Read Indian device using serial port connection.")
print("GuruxDlmsSample -S COM1 -c 16 -s 1 -a Low -P [password]")
print("------------------------------------------------------")
print("Available serial ports:")
print(GXSerial.getPortNames())
def showHelp(cls):
print(
"Gurux.DLMS.Push.Listener.Example waits notify messages from the DLMS/COSEM device."
)
print("python main -h localhost -p [Meter Port No] -c 16 -s 1 -r SN")
print(" -h \t host name or IP address (Example localhost).")
print(" -p \t port number or name (Example: 1000).")
print(" -S \t serial port. (Example: COM1 or COM1:9600:8None1)")
print(
" -r [sn, ln]\t Short name or Logical Name (default) referencing is used."
)
print(" -w WRAPPER profile is used. HDLC is default.")
print(" -t [Error, Warning, Info, Verbose] Trace messages.")
print(
" -T \t System title that is used with chiphering. Ex -T 4775727578313233"
)
print(
" -A \t Authentication key that is used with chiphering. Ex -A D0D1D2D3D4D5D6D7D8D9DADBDCDDDEDF"
)
print(
" -B \t Block cipher key that is used with chiphering. Ex -B 000102030405060708090A0B0C0D0E0F"
)
print(
" -D \t Dedicated key that is used with chiphering. Ex -D 00112233445566778899AABBCCDDEEFF"
)
print("Example:")
print("Start listener using TCP/IP connection.")
print("python main -p [Meter Port No] -w")
print("Start listener using serial port connection.")
print("GuruxDlmsSample -sp COM1:9600:8None1")
print("------------------------------------------------------")
print("Available serial ports:")
print(GXSerial.getPortNames())
def showHelp(cls):
print("GuruxDlmsSample reads data from the DLMS/COSEM device.")
print("GuruxDlmsSample -h [Meter IP Address] -p [Meter Port No] -c 16 -s 1 -r SN")
print(" -h \t host name or IP address.")
print(" -p \t port number or name (Example: 1000).")
print(" -S \t serial port. (Example: COM1 or COM1:9600:8None1)")
print(" -i IEC is a start protocol.")
print(" -a \t Authentication (None, Low, High).")
print(" -P \t ASCII password for authentication. Use 0x prefix if hex value is used. Ex. 0x00000000.")
print(" -c \t Client address. (Default: 16)")
print(" -s \t Server address. (Default: 1)")
print(" -n \t Server address as serial number.")
print(" -r [sn, ln]\t Short name or Logical Name (default) referencing is used.")
print(" -w WRAPPER profile is used. HDLC is default.")
print(" -t [Error, Warning, Info, Verbose] Trace messages.")
print(" -g \"0.0.1.0.0.255:1; 0.0.1.0.0.255:2\" Get selected object(s) with given attribute index.")
print(" -C Security Level. (None, Authentication, Encrypted, AuthenticationEncryption)")
print(" -v Invocation counter data object Logical Name. Ex. 0.0.43.1.0.255")
print(" -I \t Auto increase invoke ID")
print(" -o \t Cache association view to make reading faster. Ex. -o C:\\device.xml")
print(" -T \t System title that is used with chiphering. Ex. -T 4775727578313233")
print(" -A \t Authentication key that is used with chiphering. Ex. -A D0D1D2D3D4D5D6D7D8D9DADBDCDDDEDF")
print(" -B \t Block cipher key that is used with chiphering. Ex. -B 000102030405060708090A0B0C0D0E0F")
print(" -D \t Dedicated key that is used with chiphering. Ex. -D 00112233445566778899AABBCCDDEEFF")
print(" -d \t Used DLMS standard. Ex. -d India (DLMS, India, Italy, Saudi_Arabia, IDIS)")
print("Example:")
print("Read LG device using TCP/IP connection.")
print("GuruxDlmsSample -r SN -c 16 -s 1 -h [Meter IP Address] -p [Meter Port No]")
print("Read LG device using serial port connection.")
print("GuruxDlmsSample -r SN -c 16 -s 1 -sp COM1 -i")
print("Read Indian device using serial port connection.")
print("GuruxDlmsSample -S COM1 -c 16 -s 1 -a Low -P [password]")
print("------------------------------------------------------")
print("Available serial ports:")
print(GXSerial.getPortNames())
def showHelp(cls):
print(
"Gurux.DLMS.Push.Listener.Example waits notify messages from the DLMS/COSEM device."
)
print("python main -h localhost -p [Meter Port No] -c 16 -s 1 -r SN")
print(" -h \t host name or IP address (Example localhost).")
print(" -p \t port number or name (Example: 1000).")
print(" -S \t serial port. (Example: COM1 or COM1:9600:8None1)")
print(
" -r [sn, ln]\t Short name or Logical Name (default) referencing is used."
)
print(" -w WRAPPER profile is used. HDLC is default.")
print(" -t [Error, Warning, Info, Verbose] Trace messages.")
print("Example:")
print("Start listener using TCP/IP connection.")
print("python main -p [Meter Port No] -w")
print("Start listener using serial port connection.")
print("GuruxDlmsSample -sp COM1:9600:8None1")
print("------------------------------------------------------")
print("Available serial ports:")
print(GXSerial.getPortNames())