def _send_connect_request(self):
self.log("Sending CONNECT request", "debug", [
"Proxy Server: {}".format(self.ctx.server_conn.address),
"Connect to: {}:{}".format(self.connect_request.host, self.connect_request.port)
])
self.send_request(self.connect_request)
resp = self.read_response(self.connect_request)
if resp.status_code != 200:
raise exceptions.ProtocolException("Reconnect: Upstream server refuses CONNECT request")
def get_response_from_server(self, flow):
def get_response():
self.send_request(flow.request)
flow.response = self.read_response_headers()
try:
get_response()
except netlib.exceptions.NetlibException as e:
self.log(
"server communication error: %s" % repr(e),
level="debug"
)
# In any case, we try to reconnect at least once. This is
# necessary because it might be possible that we already
# initiated an upstream connection after clientconnect that
# has already been expired, e.g consider the following event
# log:
# > clientconnect (transparent mode destination known)
# > serverconnect (required for client tls handshake)
# > read n% of large request
# > server detects timeout, disconnects
# > read (100-n)% of large request
# > send large request upstream
if isinstance(e, exceptions.Http2ProtocolException):
# do not try to reconnect for HTTP2
raise exceptions.ProtocolException("First and only attempt to get response via HTTP2 failed.")
self.disconnect()
self.connect()
get_response()
# call the appropriate script hook - this is an opportunity for an
# inline script to set flow.stream = True
flow = self.channel.ask("responseheaders", flow)
if flow.response.stream:
flow.response.data.content = None
else:
flow.response.data.content = b"".join(self.read_response_body(
flow.request,
flow.response
))
flow.response.timestamp_end = time.time()
# no further manipulation of self.server_conn beyond this point
# we can safely set it as the final attribute value here.
flow.server_conn = self.server_conn
def _send_connect_request(self):
self.send_request(self.connect_request)
resp = self.read_response(self.connect_request)
if resp.status_code != 200:
raise exceptions.ProtocolException("Reconnect: Upstream server refuses CONNECT request")
def _process_flow(self, f):
try:
try:
request = self.read_request_headers(f)
except exceptions.HttpReadDisconnect:
# don't throw an error for disconnects that happen
# before/between requests.
return False
f.request = request
if request.first_line_format == "authority":
# The standards are silent on what we should do with a CONNECT
# request body, so although it's not common, it's allowed.
f.request.data.content = b"".join(
self.read_request_body(f.request)
)
f.request.timestamp_end = time.time()
self.channel.ask("http_connect", f)
if self.mode is HTTPMode.regular:
return self.handle_regular_connect(f)
elif self.mode is HTTPMode.upstream:
return self.handle_upstream_connect(f)
else:
msg = "Unexpected CONNECT request."
self.send_error_response(400, msg)
raise exceptions.ProtocolException(msg)
self.channel.ask("requestheaders", f)
if request.headers.get("expect", "").lower() == "100-continue":
# TODO: We may have to use send_response_headers for HTTP2
# here.
self.send_response(http.expect_continue_response)
request.headers.pop("expect")
request.data.content = b"".join(self.read_request_body(request))
request.timestamp_end = time.time()
validate_request_form(self.mode, request)
except exceptions.HttpException as e:
# We optimistically guess there might be an HTTP client on the
# other end
self.send_error_response(400, repr(e))
raise exceptions.ProtocolException(
"HTTP protocol error in client request: {}".format(e)
)
self.log("request", "debug", [repr(request)])
# set first line format to relative in regular mode,
# see https://github.com/mitmproxy/mitmproxy/issues/1759
if self.mode is HTTPMode.regular and request.first_line_format == "absolute":
request.first_line_format = "relative"
# update host header in reverse proxy mode
if self.config.options.mode == "reverse":
f.request.headers["Host"] = self.config.upstream_server.address.host
# Determine .scheme, .host and .port attributes for inline scripts. For
# absolute-form requests, they are directly given in the request. For
# authority-form requests, we only need to determine the request
# scheme. For relative-form requests, we need to determine host and
# port as well.
if self.mode is HTTPMode.transparent:
# Setting request.host also updates the host header, which we want
# to preserve
host_header = f.request.headers.get("host", None)
f.request.host = self.__initial_server_conn.address.host
f.request.port = self.__initial_server_conn.address.port
if host_header:
f.request.headers["host"] = host_header
f.request.scheme = "https" if self.__initial_server_tls else "http"
self.channel.ask("request", f)
try:
if websockets.check_handshake(request.headers) and websockets.check_client_version(request.headers):
# We only support RFC6455 with WebSockets version 13
# allow inline scripts to manipulate the client handshake
self.channel.ask("websocket_handshake", f)
if not f.response:
self.establish_server_connection(
f.request.host,
f.request.port,
f.request.scheme
)
def get_response():
self.send_request(f.request)
f.response = self.read_response_headers()
try:
get_response()
except exceptions.NetlibException as e:
self.log(
"server communication error: %s" % repr(e),
level="debug"
)
# In any case, we try to reconnect at least once. This is
# necessary because it might be possible that we already
# initiated an upstream connection after clientconnect that
# has already been expired, e.g consider the following event
# log:
# > clientconnect (transparent mode destination known)
# > serverconnect (required for client tls handshake)
# > read n% of large request
# > server detects timeout, disconnects
# > read (100-n)% of large request
# > send large request upstream
if isinstance(e, exceptions.Http2ProtocolException):
# do not try to reconnect for HTTP2
raise exceptions.ProtocolException(
"First and only attempt to get response via HTTP2 failed."
)
self.disconnect()
self.connect()
get_response()
# call the appropriate script hook - this is an opportunity for
# an inline script to set f.stream = True
self.channel.ask("responseheaders", f)
if f.response.stream:
f.response.data.content = None
else:
f.response.data.content = b"".join(
self.read_response_body(f.request, f.response)
)
f.response.timestamp_end = time.time()
# no further manipulation of self.server_conn beyond this point
# we can safely set it as the final attribute value here.
f.server_conn = self.server_conn
else:
# response was set by an inline script.
# we now need to emulate the responseheaders hook.
self.channel.ask("responseheaders", f)
self.log("response", "debug", [repr(f.response)])
self.channel.ask("response", f)
if not f.response.stream:
# no streaming:
# we already received the full response from the server and can
# send it to the client straight away.
self.send_response(f.response)
else:
# streaming:
# First send the headers and then transfer the response incrementally
self.send_response_headers(f.response)
chunks = self.read_response_body(
f.request,
f.response
)
if callable(f.response.stream):
chunks = f.response.stream(chunks)
self.send_response_body(f.response, chunks)
f.response.timestamp_end = time.time()
if self.check_close_connection(f):
return False
# Handle 101 Switching Protocols
if f.response.status_code == 101:
# Handle a successful HTTP 101 Switching Protocols Response,
# received after e.g. a WebSocket upgrade request.
# Check for WebSockets handshake
is_websockets = (
websockets.check_handshake(f.request.headers) and
websockets.check_handshake(f.response.headers)
)
if is_websockets and not self.config.options.websockets:
self.log(
"Client requested WebSocket connection, but the protocol is disabled.",
"info"
)
if is_websockets and self.config.options.websockets:
layer = pwebsockets.WebSocketsLayer(self, f)
else:
layer = self.ctx.next_layer(self)
layer()
return False # should never be reached
except (exceptions.ProtocolException, exceptions.NetlibException) as e:
self.send_error_response(502, repr(e))
if not f.response:
f.error = flow.Error(str(e))
self.channel.ask("error", f)
return False
else:
raise exceptions.ProtocolException(
"Error in HTTP connection: %s" % repr(e)
)
finally:
if f:
f.live = False
return True
def __call__(self):
if self.mode == "transparent":
self.__initial_server_tls = self.server_tls
self.__initial_server_conn = self.server_conn
while True:
try:
request = self.get_request_from_client()
self.log("request", "debug", [repr(request)])
# Handle Proxy Authentication
# Proxy Authentication conceptually does not work in transparent mode.
# We catch this misconfiguration on startup. Here, we sort out requests
# after a successful CONNECT request (which do not need to be validated anymore)
if self.mode != "transparent" and not self.authenticate(
request):
return
# Make sure that the incoming request matches our expectations
self.validate_request(request)
# Regular Proxy Mode: Handle CONNECT
if self.mode == "regular" and request.first_line_format == "authority":
self.handle_regular_mode_connect(request)
return
except netlib.exceptions.HttpReadDisconnect:
# don't throw an error for disconnects that happen before/between requests.
return
except netlib.exceptions.NetlibException as e:
self.send_error_response(400, repr(e))
six.reraise(
exceptions.ProtocolException,
exceptions.ProtocolException(
"Error in HTTP connection: %s" % repr(e)),
sys.exc_info()[2])
try:
flow = models.HTTPFlow(self.client_conn,
self.server_conn,
live=self)
flow.request = request
# set upstream auth
if self.mode == "upstream" and self.config.upstream_auth is not None:
flow.request.headers[
"Proxy-Authorization"] = self.config.upstream_auth
self.process_request_hook(flow)
if not flow.response:
self.establish_server_connection(flow)
self.get_response_from_server(flow)
else:
# response was set by an inline script.
# we now need to emulate the responseheaders hook.
flow = self.channel.ask("responseheaders", flow)
self.log("response", "debug", [repr(flow.response)])
flow = self.channel.ask("response", flow)
self.send_response_to_client(flow)
if self.check_close_connection(flow):
return
# Handle 101 Switching Protocols
# It may be useful to pass additional args (such as the upgrade header)
# to next_layer in the future
if flow.response.status_code == 101:
layer = self.ctx.next_layer(self)
layer()
return
# Upstream Proxy Mode: Handle CONNECT
if flow.request.first_line_format == "authority" and flow.response.status_code == 200:
self.handle_upstream_mode_connect(flow.request.copy())
return
except (exceptions.ProtocolException,
netlib.exceptions.NetlibException) as e:
self.send_error_response(502, repr(e))
if not flow.response:
flow.error = models.Error(str(e))
self.channel.ask("error", flow)
self.log(traceback.format_exc(), "debug")
return
else:
six.reraise(
exceptions.ProtocolException,
exceptions.ProtocolException(
"Error in HTTP connection: %s" % repr(e)),
sys.exc_info()[2])
finally:
if flow:
flow.live = False
def __call__(self):
if self.mode == "transparent":
self.__initial_server_tls = self.server_tls
self.__initial_server_conn = self.server_conn
while True:
f = http.HTTPFlow(self.client_conn, self.server_conn, live=self)
try:
request = self.get_request_from_client(f)
# Make sure that the incoming request matches our expectations
self.validate_request(request)
except exceptions.HttpReadDisconnect:
# don't throw an error for disconnects that happen before/between requests.
return
except exceptions.HttpException as e:
# We optimistically guess there might be an HTTP client on the
# other end
self.send_error_response(400, repr(e))
raise exceptions.ProtocolException(
"HTTP protocol error in client request: {}".format(e))
self.log("request", "debug", [repr(request)])
# Handle Proxy Authentication
# Proxy Authentication conceptually does not work in transparent mode.
# We catch this misconfiguration on startup. Here, we sort out requests
# after a successful CONNECT request (which do not need to be validated anymore)
if not (self.http_authenticated or self.authenticate(request)):
return
f.request = request
try:
# Regular Proxy Mode: Handle CONNECT
if self.mode == "regular" and request.first_line_format == "authority":
self.handle_regular_mode_connect(request)
return
except (exceptions.ProtocolException,
exceptions.NetlibException) as e:
# HTTPS tasting means that ordinary errors like resolution and
# connection errors can happen here.
self.send_error_response(502, repr(e))
f.error = flow.Error(str(e))
self.channel.ask("error", f)
return
# update host header in reverse proxy mode
if self.config.options.mode == "reverse":
f.request.headers[
"Host"] = self.config.upstream_server.address.host
# set upstream auth
if self.mode == "upstream" and self.config.upstream_auth is not None:
f.request.headers[
"Proxy-Authorization"] = self.config.upstream_auth
self.process_request_hook(f)
try:
if websockets.check_handshake(
request.headers) and websockets.check_client_version(
request.headers):
# We only support RFC6455 with WebSockets version 13
# allow inline scripts to manipulate the client handshake
self.channel.ask("websocket_handshake", f)
if not f.response:
self.establish_server_connection(f.request.host,
f.request.port,
f.request.scheme)
self.get_response_from_server(f)
else:
# response was set by an inline script.
# we now need to emulate the responseheaders hook.
self.channel.ask("responseheaders", f)
self.log("response", "debug", [repr(f.response)])
self.channel.ask("response", f)
self.send_response_to_client(f)
if self.check_close_connection(f):
return
# Handle 101 Switching Protocols
if f.response.status_code == 101:
return self.handle_101_switching_protocols(f)
# Upstream Proxy Mode: Handle CONNECT
if f.request.first_line_format == "authority" and f.response.status_code == 200:
self.handle_upstream_mode_connect(f.request.copy())
return
except (exceptions.ProtocolException,
exceptions.NetlibException) as e:
self.send_error_response(502, repr(e))
if not f.response:
f.error = flow.Error(str(e))
self.channel.ask("error", f)
return
else:
raise exceptions.ProtocolException(
"Error in HTTP connection: %s" % repr(e))
finally:
if f:
f.live = False
