def makeOutflowPlot():
filename = "C:\Temp\AR_Folsom_Simulation7.dss"
t1 = "18Jan1986 2400"
t2 = "18Mar1986 2400"
dssData = readDssFile(filename,t1,t2)
p = Plot.newPlot("Outflow Curves")
p.addData(dssData['leakage'])
p.addData(dssData['dikes'])
p.addData(dssData['eSpill'])
p.addData(dssData['mainSpill'])
p.addData(dssData['power'])
p.addData(dssData['upper'])
p.addData(dssData['lower'])
p.showPlot()
setCurveProperties(p,dssData['upper'],'lightgreen','Solid')
setCurveProperties(p,dssData['lower'],'lightblue','Solid')
setCurveProperties(p,dssData['power'],'darkgreen','Solid')
setCurveProperties(p,dssData['mainSpill'],'orange','Solid')
setCurveProperties(p,dssData['eSpill'], 'red','Solid')
setCurveProperties(p,dssData['dikes'], 'black','Solid')
setCurveProperties(p,dssData['leakage'],'lightgray','Solid')
if( not ListSelection.isInteractive()):
p.stayOpen()
def __init__(self, configFileName=None, dssFilePath=None):
"""
A tool is defined by providing a `yaml` configuration file
``configFileName`` and a HEC-DSS database ``dssFilePath`` to operate on.
If ``dssFilePath`` is not set, the active DSS-file in the HEC-DSSVue
window will be used. If ``configFileName`` is not set, a file selection
dialogue is displayed prompting for a configuration file.
The attribute :attr:`.config` will be set containing the parsed yaml
config file.
"""
if dssFilePath:
self.dssFilePath = dssFilePath
self.mainWindow = None
else:
from hec.dssgui import ListSelection
self.mainWindow = ListSelection.getMainWindow()
self.dssFilePath = self.mainWindow.getDSSFilename()
if not configFileName:
from javax.swing import JFileChooser
from javax.swing.filechooser import FileNameExtensionFilter
fileDialogue = JFileChooser(self.dssFilePath)
filter = FileNameExtensionFilter("Configuration file (*.yml; *.yaml)",
["yaml", "yml"])
fileDialogue.setFileFilter(filter)
ret = fileDialogue.showOpenDialog(self.mainWindow)
if ret == JFileChooser.APPROVE_OPTION:
self.configFilePath = (fileDialogue.getSelectedFile().
getAbsolutePath())
else:
raise CancelledError("Config file selection was cancelled.")
if configFileName:
self.configFilePath = path.join(path.dirname(self.dssFilePath),
configFileName)
elif dssFilePath:
raise ValueError("`configFileName` argument must be provided if `dssFilePath` is specified.")
#: Message to be displayed in HEC-DSSVue after running the tool. This
#: attribute is typically set in the :meth:`main`.
self.message = ""
if self._toolIsValid():
with codecs.open(self.configFilePath, encoding='utf-8') as configFile:
self.config = yaml.load(configFile.read())
self._configIsValid()
def RefreshCatalog(configParams, verbose):
if verbose:
print "\nRefreshCatalog(): dssFile %s\n" % configParams.dssFile
# Refresh catalog and close file
try: # In python 2.2 try: except: and try: finally: are independent
try:
ls = ListSelection.getMainWindow()
ls.open(configParams.dataDir + '/' + configParams.dssFile)
ls.refreshCatalog()
except JavaException, err:
print "%s %s\n" % ("RefreshCatalog():", err.getMessage())
finally:
ls.finish()
def __init__(self, configFileName=None, dssFilePath=None):
"""
A tool is defined by providing a `yaml` configuration file
``configFileName`` and a HEC-DSS database ``dssFilePath`` to operate on.
If ``dssFilePath`` is not set, the active DSS-file in the HEC-DSSVue
window will be used. If ``configFileName`` is not set, a file selection
dialogue is displayed prompting for a configuration file.
The attribute :attr:`.config` will be set containing the parsed yaml
config file.
"""
if dssFilePath:
self.dssFilePath = dssFilePath
self.mainWindow = None
else:
from hec.dssgui import ListSelection
self.mainWindow = ListSelection.getMainWindow()
self.dssFilePath = self.mainWindow.getDSSFilename()
if not configFileName:
self.configFilePath = self._configFileDialogue()
if configFileName:
self.configFilePath = path.join(path.dirname(self.dssFilePath),
configFileName)
elif dssFilePath:
raise ValueError("`configFileName` argument must be provided if "
"`dssFilePath` is specified.")
#: Message to be displayed in HEC-DSSVue after running the tool. This
#: attribute is typically set in the :meth:`main`.
self.message = ""
if self._toolIsValid():
with codecs.open(self.configFilePath, encoding='utf-8') as configFile:
self.config = yaml.load(configFile.read())
self._configIsValid()
class UI:
global dssFile
mainWindow = ListSelection.getMainWindow()
dssFileName = mainWindow.getDSSFilename()
dssFile = HecDss.open(dssFileName)
global frame, lbl_close, list_locations, chckbxShowLocationPlot, eventsTable, dm_events, dm_meltRate
global swePaths, precipPaths, tempPaths, bList, meltRateTable, startDateField, endDateField
frame = JFrame("Snow PAC - Parameter Aggregator & Calculator")
# frame.setUndecorated(True)
frame.setBackground(Color.WHITE)
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE)
frame.setBounds(100, 100, 1110, 775)
contentPane = JPanel()
contentPane.setBackground(Color.WHITE)
contentPane.setBorder(EmptyBorder(5, 5, 5, 5))
frame.setContentPane(contentPane)
contentPane.setLayout(None)
class MouseListener(MouseAdapter):
# @Override
def mousePressed(self, e):
global xx
global xy
xx = e.getX()
xy = e.getY()
class MouseMotionListener(MouseMotionAdapter):
# @Override
def mouseDragged(self, arg0):
x = arg0.getXOnScreen()
y = arg0.getYOnScreen()
frame.setLocation(x - xx, y - xy)
mL = MouseListener()
mML = MouseMotionListener()
contentPane.addMouseListener(mL)
contentPane.addMouseMotionListener(mML)
if os.path.exists(img_dir + "/button.jpg"):
btnIcon = ImageIcon(img_dir + "/button.jpg")
else:
btnIcon = ImageIcon(img_dir2 + "/button.jpg")
scrollPane_events = JScrollPane()
scrollPane_events.setBounds(270, 372, 403, 263)
contentPane.add(scrollPane_events)
scrollPane_locations = JScrollPane()
scrollPane_locations.setBounds(270, 49, 403, 203)
contentPane.add(scrollPane_locations)
class deleteAction(AbstractAction):
def actionPerformed(self, deleteEvent):
# Get selected Rows and reverse list. Removes each row in list one at a time.
# List is Reversed using [::-1], so it doesn't mess up the ordering as it deletes through the loop.
for row in meltRateTable.getSelectedRows()[::-1]:
dm_meltRate.removeRow(row)
dm_meltRate.insertRow(row, [None, None])
scrollPane_table = JScrollPane()
scrollPane_table.setBounds(708, 49, 338, 586)
contentPane.add(scrollPane_table)
meltRateTable = JTable()
scrollPane_table.setViewportView(meltRateTable)
scrollPane_table.setBorder(LineBorder(Color(1, 1, 1), 2, True))
meltRateTable.setFont(Font("Tahoma", Font.PLAIN, 11))
columns = ("ATI (Deg F-Day)", "Meltrate (Inches/Deg F-Day)")
data = []
datarows = 100
data.append([0, None])
for i in range(datarows):
data.append([None, None])
dm_meltRate = DefaultTableModel(data, columns)
meltRateTable.setModel(dm_meltRate)
meltRateTable.getColumnModel().getColumn(0).setPreferredWidth(154)
meltRateTable.getColumnModel().getColumn(1).setResizable(False)
meltRateTable.getColumnModel().getColumn(1).setPreferredWidth(154)
meltRateTable.setCellSelectionEnabled(True)
# Delete data from the table using the Delete Key.
# meltRateTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
inputMap = meltRateTable.getInputMap(JComponent.WHEN_FOCUSED)
actionMap = meltRateTable.getActionMap()
deleteActionStr = "delete"
inputMap.put(KeyStroke.getKeyStroke(KeyEvent.VK_DELETE, 0),
deleteActionStr)
actionMap.put(deleteActionStr, deleteAction())
# jLabelStartDate = JLabel()
# jLabelStartDate.setText("Optional Start Date:")
# jLabelStartDate.setToolTipText("Optional User Specified Date Range for Paired Data. If Specified, Will be Calculated for each Water Year.")
# jLabelStartDate.setBounds(420, 263, 120, 20);
# jLabelStartDate.setFont( Font("Tahoma", Font.PLAIN, 12))
# contentPane.add(jLabelStartDate)
#
# startDateField = CalendarField();
# jLabelStartDate.setLabelFor(startDateField);
# startDateField.setMargin(Insets(0, 4, 0, 0));
# startDateField.setBounds(540, 263, 118, 22);
# startDateField.setFont(Font("Tahoma", Font.PLAIN, 12));
# startDateField.setToolTipText("Optional User Specified Date Range for Paired Data. If Specified, Will be Calculated for each Water Year.")
# contentPane.add(startDateField);
#
# jLabelEndDate = JLabel()
# jLabelEndDate.setText("Optional End Date:")
# jLabelEndDate.setToolTipText("Optional User Specified Date Range for Paired Data. If Specified, Will be Calculated for each Water Year.")
# jLabelEndDate.setBounds(420, 293, 120, 20);
# jLabelEndDate.setFont( Font("Tahoma", Font.PLAIN, 12))
# contentPane.add(jLabelEndDate)
#
# endDateField = CalendarField();
# jLabelEndDate.setLabelFor(endDateField);
# endDateField.setMargin(Insets(0, 4, 0, 0));
# endDateField.setBounds(540, 293, 118, 22);
# endDateField.setFont(Font("Tahoma", Font.PLAIN, 12));
# endDateField.setToolTipText("Optional User Specified Date Range for Paired Data. If Specified, Will be Calculated for each Water Year.")
# contentPane.add(endDateField);
def recalcBtnSelect(event):
global swePaths, precipPaths, tempPaths
selectedLocations = list_locations.getSelectedValuesList()
swePaths, precipPaths, tempPaths = Locations.getSelectedLocations(
selectedLocations)
pathsNoDPart, sList, pList, tList = CalcAtiMelt.processPathsLists(
swePaths, precipPaths, tempPaths)
dList = CalcAtiMelt.processPathsDatesList(pathsNoDPart)
aList, mList = CalcAtiMelt.calcATIMelt(selectedLocations, sList, pList,
tList, dList)
# Write Melt-Cum and ATI Locations to DSS.
CalcAtiMelt.writeAtiMelt(selectedLocations, dList, aList, mList)
# Plot Locations if checkbox.selected = True.
if chckbxShowLocationPlot.selected is True:
# print '\nPLOT TEAM ACTIVATE'
PlotAtiMelt.plotAtiMelt(selectedLocations)
# Use optional specified dates if fields are not blank.
# if startDateField.getText() and endDateField.getText() is not None:
# pdStart, pdEnd = ProcessPD.getSpecifiedDates(startDateField, endDateField)
# else:
pdStart = None
pdEnd = None
# Create Paired Data for Selected Locations.
ProcessPD.processPairedData(selectedLocations, dList, mList, aList,
pdStart, pdEnd)
# Populate the UI Paired Data Table.
CalcPD.updatePDTable(dssFile, eventsTable, dm_events)
# Close the DSS File.
dssFile.close()
def plotPDBtnSelect(event):
selected_Events = eventsTable.getSelectedRows()
# Print 'selected_Events: ', selected_Events
# Sorting of the table by selecting the headers is doen by using: eventsTable.setAutoCreateRowSorter(True)
# This sorts the table but does not update the table model.
# To ensure sorting and selecting of resulting paths works properly,
# we must convert our selection using: eventsTable.convertRowIndexToModel(event)
selectedEvents = []
for event in selected_Events:
selectedEvents.append(eventsTable.convertRowIndexToModel(event))
# print 'selectedEvents: ', selectedEvents
PlotPD.plotPD(eventsTable, selectedEvents, dssFile)
dssFile.close()
def calcMeltRateBtnSelect(event):
selected_Events = eventsTable.getSelectedRows()
selectedEvents = []
for event in selected_Events:
selectedEvents.append(eventsTable.convertRowIndexToModel(event))
meltRateList = CalcMeltRate.calcMeltRate(selectedEvents, eventsTable,
meltRateTable, dssFile)
CalcMeltRate.updateTable(meltRateTable, meltRateList, dm_meltRate)
dssFile.close()
locDict, bList = Locations.getPaths(dssFile)
locList = Locations.getList(locDict)
list_locations = JList(locList)
scrollPane_locations.setViewportView(list_locations)
list_locations.setBorder(LineBorder(Color(0, 0, 0), 2, True))
eventsTable = JTable()
scrollPane_events.setViewportView(eventsTable)
scrollPane_events.setBorder(LineBorder(Color(1, 1, 1), 2, True))
eventsTable.setFont(Font("Tahoma", Font.PLAIN, 11))
locationsList, eventsList = Locations.getPairedData(dssFile)
columns = ("Location", "Event")
data = []
for l, e in zip(locationsList, eventsList):
data.append([l, e])
dm_events = DefaultTableModel(data, columns)
eventsTable.setModel(dm_events)
eventsTable.setAutoCreateRowSorter(True)
eventsTable.getColumnModel().getColumn(0).setPreferredWidth(154)
eventsTable.getColumnModel().getColumn(1).setResizable(False)
eventsTable.getColumnModel().getColumn(1).setPreferredWidth(154)
eventsTable.setRowSelectionAllowed(True)
inputPanel = JPanel()
inputPanel.setBorder(EmptyBorder(0, 0, 0, 0))
inputPanel.setBackground(Color(255, 255, 255))
inputPanel.setBounds(270, 11, 410, 27)
contentPane.add(inputPanel)
inputPanel.setLayout(None)
inputPanel.setVisible(True)
lbl_locations = JLabel(
"DSS Locations that have PRECIP-INC, TEMPERATURE-AIR-AVG, and SWE. ")
lbl_locations.setFont(Font("Tahoma", Font.PLAIN, 12))
lbl_locations.setBounds(0, 11, 410, 15)
inputPanel.add(lbl_locations)
btnRecalc = JButton(btnIcon, actionPerformed=recalcBtnSelect)
btnRecalc.setText("Calculate Paired Data")
btnRecalc.setFont(Font("Tahoma", Font.BOLD, 12))
btnRecalc.setForeground(Color.WHITE)
btnRecalc.setBackground(Color.WHITE)
btnRecalc.setBorderPainted(False)
btnRecalc.setContentAreaFilled(False)
btnRecalc.setFocusPainted(False)
btnRecalc.setOpaque(True)
btnRecalc.setVerticalTextPosition(SwingConstants.CENTER)
btnRecalc.setHorizontalTextPosition(SwingConstants.CENTER)
btnRecalc.setBounds(382, 293, 165, 54)
contentPane.add(btnRecalc)
leftPanel = JPanel()
leftPanel.setBackground(Color.DARK_GRAY)
leftPanel.setBounds(0, 0, 250, 780)
contentPane.add(leftPanel)
leftPanel.setLayout(None)
lbl_castle = JLabel("")
lbl_castle.setBounds(110, 678, 40, 25)
leftPanel.add(lbl_castle)
try:
i_corps = ImageIO.read(File(img_dir + "/CorpsCastle.png"))
except:
i_corps = ImageIO.read(File(img_dir2 + "/CorpsCastle.png"))
corpsCastle = i_corps.getScaledInstance(lbl_castle.getWidth(),
lbl_castle.getHeight(),
Image.SCALE_SMOOTH)
lbl_castle.setVerticalAlignment(SwingConstants.TOP)
lbl_castle.setIcon(ImageIcon(corpsCastle))
lbl_logo = JLabel("")
lbl_logo.setBounds(18, 294, 218, 148)
leftPanel.add(lbl_logo)
try:
snowLogo = ImageIO.read(File(img_dir + "/melted-snowman.png"))
except:
snowLogo = ImageIO.read(File(img_dir2 + "/melted-snowman.png"))
dssLogo = snowLogo.getScaledInstance(lbl_logo.getWidth(),
lbl_logo.getHeight(),
Image.SCALE_SMOOTH)
lbl_logo.setVerticalAlignment(SwingConstants.TOP)
lbl_logo.setIcon(ImageIcon(dssLogo))
lbl_logo2 = JLabel("")
lbl_logo2.setBounds(18, 11, 218, 148)
leftPanel.add(lbl_logo2)
try:
snowPacLogo = ImageIO.read(File(img_dir + "/SnowPac.png"))
except:
snowPacLogo = ImageIO.read(File(img_dir2 + "/SnowPac.png"))
snowPac = snowPacLogo.getScaledInstance(lbl_logo2.getWidth(),
lbl_logo2.getHeight(),
Image.SCALE_SMOOTH)
lbl_logo2.setVerticalAlignment(SwingConstants.TOP)
lbl_logo2.setIcon(ImageIcon(snowPac))
# lbl_close = JLabel("X")
#
# class CloseClickListener(MouseAdapter):
# # @Override
# def mouseEntered(self):
# lbl_close.setBorder(LineBorder.createGrayLineBorder())
# # @Override
# def mouseExited(self):
# lbl_close.setBorder(None)
# # @Override
# def mouseClicked(self):
# lbl_close.setBorder(BorderFactory.createLineBorder(Color.red));
# sys.exit();
# cL = CloseClickListener()
# lbl_close.addMouseListener(cL)
#
# lbl_close.setHorizontalAlignment(SwingConstants.CENTER);
# lbl_close.setForeground(Color(241, 57, 83));
# lbl_close.setFont(Font("Tahoma", Font.PLAIN, 18));
# lbl_close.setBounds(1071, 0, 37, 27);
# contentPane.add(lbl_close);
lblPxf = JLabel("Base Temperature (F):")
lblPxf.setToolTipText("The temperature at which melt will occur.")
lblPxf.setFont(Font("Tahoma", Font.PLAIN, 12))
lblPxf.setBounds(400, 263, 132, 15)
contentPane.add(lblPxf)
textField_8 = JTextField()
textField_8.setFont(Font("Tahoma", Font.PLAIN, 12))
textField_8.setToolTipText("The temperature at which melt will occur.")
textField_8.setText("32.0")
textField_8.setBounds(548, 263, 40, 20)
contentPane.add(textField_8)
textField_8.setColumns(10)
chckbxShowLocationPlot = JCheckBox("Plot Locations")
chckbxShowLocationPlot.setToolTipText(
"Will plot the Temp, Precip, SWE, ATI, and Melt for each selected location."
)
chckbxShowLocationPlot.setSelected(True)
chckbxShowLocationPlot.setBackground(Color.WHITE)
chckbxShowLocationPlot.setFont(Font("Tahoma", Font.PLAIN, 12))
chckbxShowLocationPlot.setBounds(547, 310, 120, 23)
contentPane.add(chckbxShowLocationPlot)
lblEvents = JLabel("Paired Data")
lblEvents.setBounds(270, 346, 72, 15)
contentPane.add(lblEvents)
lblEvents.setFont(Font("Tahoma", Font.PLAIN, 12))
# lblAtiThreshold = JLabel("ATI Threshold:");
# lblAtiThreshold.setToolTipText("Some Melt Events are small & can be ignored. The ATI Threshold is a value that must be reached for the event to be listed.");
# lblAtiThreshold.setFont(Font("Tahoma", Font.PLAIN, 12));
# lblAtiThreshold.setBounds(500, 610, 82, 15);
# contentPane.add(lblAtiThreshold);
# textField_9 = JTextField();
# textField_9.setFont(Font("Tahoma", Font.PLAIN, 12));
# textField_9.setText("0.0");
# textField_9.setToolTipText("Some Melt Events are small & can be ignored. The ATI Threshold is a value that must be reached for the event to be listed.");
# textField_9.setColumns(10);
# textField_9.setBounds(600, 608, 60, 20);
# contentPane.add(textField_9);
btnPlot = JButton(btnIcon, actionPerformed=plotPDBtnSelect)
btnPlot.setText("Plot Paired Data")
btnPlot.setFont(Font("Tahoma", Font.BOLD, 12))
btnPlot.setForeground(Color.WHITE)
btnPlot.setBackground(Color.WHITE)
btnPlot.setBorderPainted(False)
btnPlot.setContentAreaFilled(False)
btnPlot.setFocusPainted(False)
btnPlot.setOpaque(False)
btnPlot.setVerticalTextPosition(SwingConstants.CENTER)
btnPlot.setHorizontalTextPosition(SwingConstants.CENTER)
btnPlot.setBounds(385, 657, 163, 54)
contentPane.add(btnPlot)
lblAtimeltrateTable = JLabel("ATI-Meltrate Table")
lblAtimeltrateTable.setFont(Font("Tahoma", Font.PLAIN, 12))
lblAtimeltrateTable.setBounds(708, 10, 410, 15)
contentPane.add(lblAtimeltrateTable)
lblAtimeltrateTable2 = JLabel(
"The first ATI value should be 0. ATI values must be ascending.")
lblAtimeltrateTable2.setFont(Font("Tahoma", Font.PLAIN, 11))
lblAtimeltrateTable2.setBounds(708, 30, 410, 15)
contentPane.add(lblAtimeltrateTable2)
btnCalculateMeltrate = JButton(btnIcon,
actionPerformed=calcMeltRateBtnSelect)
btnCalculateMeltrate.setText("Calculate Meltrate")
btnCalculateMeltrate.setFont(Font("Tahoma", Font.BOLD, 12))
btnCalculateMeltrate.setToolTipText(
"Calculate Meltrate for ATI values in the ATI-Meltrate Table. Calculation will performed on the Paired Data Records Selected in the Paired Data Table."
)
btnCalculateMeltrate.setForeground(Color.WHITE)
btnCalculateMeltrate.setBackground(Color.WHITE)
btnCalculateMeltrate.setBorderPainted(False)
btnCalculateMeltrate.setContentAreaFilled(False)
btnCalculateMeltrate.setFocusPainted(False)
btnCalculateMeltrate.setOpaque(False)
btnCalculateMeltrate.setVerticalTextPosition(SwingConstants.CENTER)
btnCalculateMeltrate.setHorizontalTextPosition(SwingConstants.CENTER)
btnCalculateMeltrate.setBounds(792, 657, 163, 54)
contentPane.add(btnCalculateMeltrate)
frame.setVisible(True)
dssFile.close()
#Importing shef files to DSS
from hec.script import Plot, MessageBox
from hec.heclib.dss import HecDss, DSSPathname
from hec.dssgui import ListSelection
import java
import sys
ls = ListSelection.getMainWindow()
ls.setIsInteractive(1, 0) # Turn off popups
ls.open("c:/temp/import.dss")
ls.importShef("c:/temp/FolsomShefData.shef")
#ls.finish() # Batch mode only
