def cv58():
formatTRKFILE = [
("X", np.float),
("Y", np.float),
("Z", np.float),
("TXX", np.float),
("TYY", np.float),
("TZZ", np.float),
("CTRACK", np.float),
("CMTRACK", np.float),
("ATRACK", np.float),
]
formatfort89 = [
("CXTRCK", np.float),
("CYTRCK", np.float),
("CZTRCK", np.float),
("XTRACK", np.float),
("YTRACK", np.float),
("ZTRACK", np.float),
("JTRACK", np.int),
("NCASE", np.int),
("ATRACK", np.float),
]
fname = "ir1_6500GeV_b1_20MeV_orbitDumpINICON001_fort.89"
fname = "inicon1/createTrajectories/run_00001/ir1_6500GeV_b1_20MeV_orbitDumpINICON001_fort.89"
#fname = "ir1_6500GeV_b1_20MeV_orbitDump001_TRAKFILE"
format, xvar, yvar = formatfort89, "ZTRACK", "YTRACK"
fileDType = np.dtype(format)
fdata = np.loadtxt(fname, dtype=fileDType)
# keep order
xList = fdata[xvar].tolist()
yList = fdata[yvar].tolist()
color = kRed
mStyle = 6
gr = makeTGraph(xList, yList, color, mStyle)
hname = "trajectory"
a, b = 1, 1
cv = TCanvas('cv' + hname, 'cv' + hname, 10, 10, a * 900, b * 600)
cv.Divide(a, b)
gr.Draw('ap')
pname = "~/public/www/HL-LHC/TCT/6.5TeV/beamgas/plt.png"
cv.SaveAs(pname)
def cv79():
for pFile, xTitle, lText in pData:
# get data
data = getdata5c(pFile)
# plot data as is
rel = 'pressureEq'
cv = TCanvas('cv' + rel + lText, 'cv' + rel + lText, 2100, 900)
cv.SetLogy(1)
#cv.SetGridy(1)
x1, y1, x2, y2 = 0.8, 0.65, 0.9, 0.9
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph(rel, rel)
lm = 'l'
totalPress = getTotalPressure(data)
xlist, ylist, col, mstyle, lg = data[
's'], totalPress, kBlack, 21, 'total'
g4 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g4, lg, lm)
mg.Add(g4)
xlist, ylist, col, mstyle, lg = data['s'], data[
'H2_Eq'], kTeal - 3, 22, 'H_{2}'
g0 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g0, lg, lm)
mg.Add(g0)
xlist, ylist, col, mstyle, lg = data['s'], data[
'CH4_Eq'], kMagenta + 1, 24, 'CH_{4}'
g1 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g1, lg, lm)
mg.Add(g1)
xlist, ylist, col, mstyle, lg = data['s'], data[
'CO2_Eq'], kAzure + 4, 33, 'CO_{2}'
g2 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g2, lg, lm)
mg.Add(g2)
xlist, ylist, col, mstyle, lg = data['s'], data[
'CO_Eq'], kRed - 2, 21, 'CO'
g3 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g3, lg, lm)
mg.Add(g3)
mg.Draw("al")
mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle(xTitle)
mg.GetYaxis().SetTitle("pressure equivalent [mbar]")
mg.GetYaxis().SetRangeUser(5e-15, 1e-5)
mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.45, 0.88, lText)
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/6500GeV'
pname = pFile.split('.txt')[0] + "_pressureEq.pdf"
print('Saving file as ' + pname)
cv.Print(pname)
# ---------------------------------------------------
# plot data as rho
rel = 'rho'
cv = TCanvas('cvrho' + lText, 'cvrho' + lText, 2100, 900)
cv.SetLogy(1)
#cv.SetGridy(1)
x1, y1, x2, y2 = 0.8, 0.65, 0.9, 0.9
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph(rel, rel)
lm = 'pl'
xlist, ylist, col, mstyle, lg = data['s'], getrho(
totalPress), kBlack, 21, 'total'
g4 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g4, lg, lm)
mg.Add(g4)
xlist, ylist, col, mstyle, lg = data['s'], getrho(
data['H2_Eq']), kTeal - 3, 22, 'H_{2}'
g0 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g0, lg, lm)
mg.Add(g0)
xlist, ylist, col, mstyle, lg = data['s'], getrho(
data['CH4_Eq']), kMagenta + 1, 24, 'CH_{4}'
g1 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g1, lg, lm)
mg.Add(g1)
xlist, ylist, col, mstyle, lg = data['s'], getrho(
data['CO2_Eq']), kAzure + 4, 33, 'CO_{2}'
g2 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g2, lg, lm)
mg.Add(g2)
xlist, ylist, col, mstyle, lg = data['s'], getrho(
data['CO_Eq']), kRed - 2, 21, 'CO'
g3 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g3, lg, lm)
mg.Add(g3)
mg.Draw("al")
mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle(xTitle)
mg.GetYaxis().SetTitle("density [molecules/m^{3}]")
mg.GetYaxis().SetRangeUser(5e5, 1e16)
mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.45, 0.88, lText)
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/6500GeV'
pname = pFile.split('.txt')[0] + "_" + rel + ".pdf"
print('Saving file as ' + pname)
cv.Print(pname)
# ---------------------------------------------------
# plot data as rho
rel = 'rho'
cv = TCanvas('cvrho' + lText, 'cvrho' + lText, 2100, 900)
cv.SetLogy(1)
#cv.SetGridy(1)
x1, y1, x2, y2 = 0.8, 0.65, 0.9, 0.9
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph(rel, rel)
lm = 'pl'
xlist, ylist, col, mstyle, lg = data['s'], getrho(
totalPress), kBlack, 21, 'total'
g4 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g4, lg, lm)
mg.Add(g4)
rho_H2 = getrho(data['H2_Eq'])
xlist, ylist, col, mstyle, lg = data[
's'], rho_H2, kTeal - 3, 22, 'H_{2}'
g0 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g0, lg, lm)
mg.Add(g0)
rho_CH4 = getrho(data['CH4_Eq'])
xlist, ylist, col, mstyle, lg = data[
's'], rho_CH4, kMagenta + 1, 24, 'CH_{4}'
g1 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g1, lg, lm)
mg.Add(g1)
rho_CO2 = getrho(data['CO2_Eq'])
xlist, ylist, col, mstyle, lg = data[
's'], rho_CO2, kAzure + 4, 33, 'CO_{2}'
g2 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g2, lg, lm)
mg.Add(g2)
rho_CO = getrho(data['CO_Eq'])
xlist, ylist, col, mstyle, lg = data['s'], rho_CO, kRed - 2, 21, 'CO'
g3 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g3, lg, lm)
mg.Add(g3)
mg.Draw("al")
mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle(xTitle)
mg.GetYaxis().SetTitle("density [molecules/m^{3}]")
mg.GetYaxis().SetRangeUser(5e5, 1e16)
mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.45, 0.88, lText)
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/6500GeV'
pname = pFile.split('.txt')[0] + "_" + rel + ".pdf"
print('Saving file as ' + pname)
cv.Print(pname)
# ---------------------------------------------------
# plot atomic rho
rel = 'atomicrho'
cv = TCanvas('cv' + rel + lText, 'cv' + rel + lText, 2100, 900)
cv.SetLogy(1)
#cv.SetGridy(1)
x1, y1, x2, y2 = 0.8, 0.7, 0.9, 0.9
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph(rel, rel)
lm = 'pl'
rho_H, rho_C, rho_O = getAtomicRho(rho_H2, rho_CH4, rho_CO, rho_CO2)
rho_total_atomic = [
rho_H[i] + rho_C[i] + rho_O[i] for i in range(len(rho_O))
]
xlist, ylist, col, mstyle, lg = data[
's'], rho_total_atomic, kBlack, 20, 'total'
g3 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g3, lg, lm)
mg.Add(g3)
xlist, ylist, col, mstyle, lg = data['s'], rho_H, kTeal + 3, 22, 'H'
g0 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g0, lg, lm)
mg.Add(g0)
xlist, ylist, col, mstyle, lg = data['s'], rho_O, kAzure - 4, 33, 'O'
g2 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g2, lg, lm)
mg.Add(g2)
xlist, ylist, col, mstyle, lg = data['s'], rho_C, kMagenta - 1, 24, 'C'
g1 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g1, lg, lm)
mg.Add(g1)
mg.Draw("al")
mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle(xTitle)
mg.GetYaxis().SetTitle("density [atoms/m^{3}]")
mg.GetYaxis().SetRangeUser(5e5, 1e16)
mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.45, 0.88, lText)
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/6500GeV'
pname = pFile.split('.txt')[0] + "_" + rel + ".pdf"
print('Saving file as ' + pname)
cv.Print(pname)
# ---------------------------------------------------
# plot pint
rel = 'pint'
cv = TCanvas('cv' + rel + lText, 'cv' + rel + lText, 2100, 900)
cv.SetLogy(1)
#cv.SetGridy(1)
x1, y1, x2, y2 = 0.8, 0.72, 0.9, 0.92
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph(rel, rel)
lm = 'l'
pint_H, pint_C, pint_O, pint_tot = getpint(rho_H, rho_C, rho_O)
xlist, ylist, col, mstyle, lg = data[
's'], pint_tot, kBlack, 20, 'total'
g3 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g3, lg, lm)
mg.Add(g3)
xlist, ylist, col, mstyle, lg = data['s'], pint_H, kTeal + 3, 22, 'H'
g0 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g0, lg, lm)
mg.Add(g0)
xlist, ylist, col, mstyle, lg = data['s'], pint_O, kAzure - 4, 33, 'O'
g2 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g2, lg, lm)
mg.Add(g2)
xlist, ylist, col, mstyle, lg = data[
's'], pint_C, kMagenta - 1, 24, 'C'
g1 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g1, lg, lm)
mg.Add(g1)
mg.Draw("al")
mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle(xTitle)
mg.GetYaxis().SetTitle("interaction probability")
mg.GetYaxis().SetRangeUser(5e-19, 1e-10)
mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.45, 0.88, lText)
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/6500GeV/'
pname = pFile.split('.txt')[0].split("/")[-1] + "_" + rel + ".pdf"
print('Saving file as ' + pname)
cv.Print(pname)
def cv40():
# twiss file
tf = pymadx.Tfs(
'/afs/cern.ch/work/r/rkwee/HL-LHC/LHC-Collimation/SixTrackConfig/6.5TeV/MED800/B1/twiss_lhcb1_med_new_thin_800.tfs'
)
BETX = tf.GetColumn('BETX')
BETY = tf.GetColumn('BETY')
ALFX = tf.GetColumn('ALFX')
ALFY = tf.GetColumn('ALFY')
X = tf.GetColumn('X')
Y = tf.GetColumn('Y')
PX = tf.GetColumn('PX')
PY = tf.GetColumn('PY')
S = tf.GetColumn('S')
IP5 = tf.GetColumnDict('S')['IP5']
IP8 = tf.GetColumnDict('S')['IP8']
XurMin, XurMax = length_LHC - 300, length_LHC
rel = '_IR1Left'
XurMin, XurMax = 0, 300
rel = '_IR1Right'
XurMin, XurMax = IP5 - 300, IP5 + 300
rel = '_IP5'
XurMin, XurMax = IP8 - 300, IP8 + 300
rel = '_IP8'
XurMin, XurMax = -1, -1
rel = '_phasespace'
cv = TCanvas('cv', 'cv', 900, 900)
x1, y1, x2, y2 = 0.8, 0.65, 0.9, 0.9
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph()
# marker in legend
lm = 'p'
xList, yList, color, mStyle, lg = X, PX, kGreen + 1, 21, "x,x'"
g1 = makeTGraph(xList, yList, color, mStyle)
mlegend.AddEntry(g1, lg, lm)
mg.Add(g1)
xList, yList, color, mStyle, lg = Y, PY, kBlue + 1, 27, "y,y'"
g3 = makeTGraph(xList, yList, color, mStyle)
mlegend.AddEntry(g3, lg, lm)
mg.Add(g3)
mg.Draw("a" + lm)
mg.GetXaxis().SetTitle('x,y')
if XurMin != -1:
mg.GetXaxis().SetRangeUser(XurMin, XurMax)
mlegend.Draw()
pname = wwwpath
subfolder = 'TCT/6.5TeV/beamgas/'
pname += subfolder + 'twiss_b1' + rel + '.png'
print('Saving file as ' + pname)
cv.Print(pname)
def cv75():
# twiss file
do4TeV = 0
if do4TeV:
tf = pymadx.Tfs(
"/afs/cern.ch/work/r/rkwee/HL-LHC/LHC-Collimation/SixTrackConfig/4TeV/beamgas/twiss_b4.data.thin"
)
energy = "4TeV"
gamma_rel = 4e3 / 0.938
betaStar = 0.6
else:
tf = pymadx.Tfs(
'/afs/cern.ch/work/r/rkwee/HL-LHC/LHC-Collimation/SixTrackConfig/6.5TeV/MED800/B1/twiss_lhcb1_med_new_thin_800.tfs'
)
gamma_rel = 6.5e3 / 0.938
energy = '6.5TeV'
betaStar = 0.8
print energy, "." * 45
BETX = tf.GetColumn('BETX')
BETY = tf.GetColumn('BETY')
S = tf.GetColumn('S')
# print "first elements of twiss betax", BETX[100:200]
# print "first elements of twiss betay", BETY[100:200]
# no shift if val is length
shiftVal = length_LHC #-500
cnt = 0
S_shifted, X_shifted = [], []
for s in S:
s_shifted = s + shiftVal
#print "s_shifted", s_shifted
if s_shifted >= length_LHC:
cnt += 1
s_shifted -= length_LHC
#print "s_shifted after subtraction", s_shifted
S_shifted += [s_shifted]
#print "using", s_shifted
S_shifted.sort()
XurMin, XurMax = 0, 548.
#XurMin, XurMax = 0,5.
rel = '_compsigma_IR1Right_' + energy
lShift = 0.0
# -----------------------------------------------
# fluka part from cv74
# full sample at 4 TeV
#filename = projectpath + 'HaloRun2/valBG4TeV2/oneFileAllTraj.dat.89.root'
filename = projectpath + 'HaloRun2/valBG4TeV2/traj_fort.89.10.root' # as used in fluka simulations
filename = projectpath + '4TeVBGnoBS/createTrajectories6p5_checkfix/runs_fix/ir1_6500GeV_b1_20MeV_orbitDumpINICON_89.root' # fixed version of inicons
filename = projectpath + '4TeVBGnoBS/createTrajectories6p5_checkrepfix/run_repfix/ir1_6500GeV_b1_20MeV_orbitDumpINICON_89.root' # fixed version of inicons
# sufficient trajectories at 6.5 TeV
#if not do4TeV: filename = '/afs/cern.ch/project/lhc_mib/HaloRun2/valBG4TeV2/400Traj.fort.89.root'
print "Opening", filename
rf = TFile.Open(filename)
mt = rf.Get("particle")
SIGXflu = [] # getStatErrFromTProf(mt, "XTRACK",-1000.,1)
# SIGYflu1 = getStatErrFromTProf(mt, "YTRACK",0.,2) # to cut off outlier use only up to s=1000cm
# SIGYflu2 = getStatErrFromTProf(mt, "YTRACK",-1.,2)# then use this when outlier is gone
# SIGYflu = [ SIGYflu1[i] for i in range(1001)]
# SIGYflu += [ SIGYflu2[i] for i in range(1001,54694)]
SIGYflu = [] # getStatErrFromTProf(mt, "YTRACK",-1.,2)
srange_meter = [0.01 * s for s in range(54694)]
a, b = 1, 1
cv = TCanvas('cv', 'cv', a * 2100, b * 900)
cv.Divide(a, b)
cv.cd(1)
x1, y1, x2, y2 = 0.5 - lShift, 0.65, 0.9 - lShift, 0.9
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.05)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph()
# marker in legend
lm = 'lp'
emittance_norm = 3.5e-6
emittance_geo = emittance_norm / gamma_rel
SIGX = [math.sqrt(betax * emittance_geo) for betax in BETX]
SIGY = [math.sqrt(betay * emittance_geo) for betay in BETY]
for S in SIGY:
if S in SIGX:
print "?>>> S in both??", S
SIGMAX = [s * 1000. for s in SIGX]
xList, yList, color, mStyle, lg = S_shifted, SIGMAX, kGreen - 1, 22, '#sigma_{x} from Twiss'
g0 = makeTGraph(xList, yList, color, mStyle)
mlegend.AddEntry(g0, lg, lm)
mg.Add(g0)
print '-' * 11, lg
SIGMAY = [s * 1000 for s in SIGY]
xList, yList, color, mStyle, lg = S_shifted, SIGMAY, kGreen - 2, 20, '#sigma_{y} from Twiss'
g1 = makeTGraph(xList, yList, color, mStyle)
# mlegend.AddEntry(g1, lg, lm)
# mg.Add(g1)
ytitle = 'beam size [mm]'
print '-' * 11, lg
print S_shifted[:10], srange_meter[:10]
SIGYfluka = [s * 10 for s in SIGYflu]
xList, yList, color, mStyle, lg = srange_meter, SIGYfluka, kGreen + 1, 21, '#sigma_{y} from fluka'
g2 = makeTGraph(xList, yList, color, mStyle)
# mlegend.AddEntry(g2, lg, lm)
#mg.Add(g2)
print '-' * 11, lg
SIGXfluka = [s * 10. for s in SIGXflu]
xList, yList, color, mStyle, lg = srange_meter, SIGXfluka, kBlue + 1, 27, "#sigma_{x} from fluka"
g3 = makeTGraph(xList, yList, color, mStyle)
mlegend.AddEntry(g3, lg, lm)
mg.Add(g3)
print '-' * 11, lg
sigxflu_x, sigxtwi_x, sigxflu_y, sigxtwi_y = ROOT.Double(), ROOT.Double(
), ROOT.Double(), ROOT.Double()
collectNp = []
for i in range(20, len(SIGYflu)):
g3.GetPoint(i, sigxflu_x, sigxflu_y)
g1.GetPoint(i, sigxtwi_x, sigxtwi_y)
ratiosigx = 0.
if sigxtwi_y: ratiosigx = sigxflu_y**2 / sigxtwi_y**2
newEmittance = emittance_norm * ratiosigx
collectNp += [ratiosigx]
print "New emittance", newEmittance, " dev:", collectNp[
-1], "at ", srange_meter[
i], "sigxflu", sigxflu_y, "sigxtwi", sigxtwi_y
print "max deviation", max(collectNp), "at ", collectNp.index(
max(collectNp)),
mg.Draw("a" + lm)
l = TLine()
l.SetLineStyle(1)
YurMin, YurMax = 0, 0.0019
l.SetLineColor(kRed)
s = 22.6
l.DrawLine(s, YurMin, s, YurMax)
s = 59.
l.DrawLine(s, YurMin, s, YurMax)
s = 153.
l.DrawLine(s, YurMin, s, YurMax)
s = 269.
l.DrawLine(s, YurMin, s, YurMax)
mg.GetYaxis().SetTitle(ytitle)
mg.GetXaxis().SetTitle('s [m]')
if XurMin != -1:
mg.GetXaxis().SetRangeUser(XurMin, XurMax)
mlegend.Draw()
pname = wwwpath
subfolder = 'TCT/' + energy + '/beamgas/'
pname += subfolder + 'from_twiss_b1' + rel + '.png'
print('Saving file as ' + pname)
cv.Print(pname)
def cv82():
# ---------------------------------------------------
rel = 'allpinttot'
cv = TCanvas( 'cv'+ rel , 'cv'+rel , 2100, 900)
cv.SetLogy(0)
cv.SetGridy(0)
x1, y1, x2, y2 = 0.75, 0.72, 0.88, 0.92
mlegend = TLegend( x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph(rel,rel)
lm = 'l'
grs = []
for i,( pFile, xTitle, lText) in enumerate(pData):
print "Getting data from file", pFile
fillnumber = pFile.split("Density_")[1].split('b_26')[0] + 'b'
print "."*33
data = cv79.getdata5c(pFile)
s_incoming = []
# only one side, chose positive s
s_positiveb1, s_positiveb2 = [],[]
for cs in data['s']:
s = float(cs)
if s<0.:
s_positiveb1 += [-s]
else:
s_positiveb2 += [s]
print "len(s_positiveb1)",len(s_positiveb1)
print "len(s_positiveb2)",len(s_positiveb2)
rho_H2, rho_CH4, rho_CO, rho_CO2 = cv79.getrho(data['H2_Eq']),cv79.getrho(data['CH4_Eq']),cv79.getrho(data['CO_Eq']),cv79.getrho(data['CO2_Eq'])
rho_H, rho_C, rho_O = cv79.getAtomicRho(rho_H2, rho_CH4, rho_CO, rho_CO2)
pint_H, pint_C, pint_O, pint_tot = cv79.getpint(rho_H, rho_C, rho_O)
pint_incoming, pint_tot_incomingbeam = [],[]
if lText.count("B2"):
pint_tot_incomingbeam = pint_tot[len(s_positiveb2):]
s_incoming = s_positiveb2[:len(s_positiveb2)-1]
else:
pint_tot_incomingbeam = [p for p in pint_tot[:len(s_positiveb1)+1]]
s_incoming = s_positiveb1
print "len(pint_tot_incomingbeam)", len(pint_tot_incomingbeam)
print "len(s_incoming)", len(s_incoming)
xlist, ylist, col, mstyle, lg = s_incoming,pint_tot_incomingbeam , kBlack+i,20+i, lText
grs += [ makeTGraph(xlist, ylist, col, mstyle)]
mlegend.AddEntry(grs[-1], lg, lm)
mg.Add(grs[-1])
mg.Draw("al")
mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle(xTitle)
mg.GetYaxis().SetTitle("total interaction probability")
mg.GetYaxis().SetRangeUser(5e-18,4e-10)
mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.42, 0.82, 'incoming beams 6.5 TeV')
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/6500GeV'
pname = "pint_"+rel+".pdf"
print('Saving file as ' + pname )
cv.Print(pname)
def cv85():
# ---------------------------------------------------
rel = 'comppint'
# rel = 'compallpress'
a, b = 1, 1
cv = TCanvas('cv' + rel, 'cv' + rel, a * 2100, b * 900)
cv.Divide(a, b)
cv.SetLogy(1)
cv.SetGridy(0)
x1, y1, x2, y2 = 0.75, 0.6, 0.88, 0.94
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph(rel, rel)
lm = 'l'
grs = []
for i, (pFile, xTitle, lText) in enumerate(pData):
print "Getting data from file", pFile
print "." * 33
data = {}
if pFile.count("LSS1"):
data = cv32.getdata14c(pFile)
stmp, rho_C, rho_H, rho_O = cv65.getAtomicRho(data)
stmp2 = stmp[1:]
s_full = stmp2[::-1]
moleculeKeys = ['H2_N2Eq', 'CH4_N2Eq', 'CO_N2Eq', 'CO2_N2Eq']
for j in range(1, len(data['H2_N2Eq'])):
sumPress = 0.
for mk in moleculeKeys:
sumPress += float(data[mk][j])
totalPress += [sumPress]
else:
data = cv79.getdata5c(pFile)
totalPress = cv79.getTotalPressure(data)
pressCO = data['CO_Eq']
pressCO2 = data['CO2_Eq']
pressCH4 = data['CH4_Eq']
pressH2 = data['H2_Eq']
s_full = data['s']
s_incoming = []
# only one side, chose positive s
s_positiveb1, s_positiveb2 = [], []
#print s_full
for cs in s_full:
s = float(cs)
if s < 0.:
s_positiveb1 += [-s]
else:
s_positiveb2 += [s]
print "len(s_positiveb1)", len(s_positiveb1)
print "len(s_positiveb2)", len(s_positiveb2)
if lText.count("B2"):
lenposb2 = len(s_positiveb2)
press_tot_incomingbeam = totalPress[lenposb2:]
pressH2_incoming = pressH2[lenposb2:]
pressCO_incoming = pressCO[lenposb2:]
pressCH4_incoming = pressCH4[lenposb2:]
pressCO2_incoming = pressCO2[lenposb2:]
s_incoming = s_positiveb2[:len(s_positiveb2) - 1]
else:
press_tot_incomingbeam = [
p for p in totalPress[:len(s_positiveb1) + 1]
]
pressH2_incoming = pressH2[:len(s_positiveb1) + 1]
pressCO_incoming = pressCO[:len(s_positiveb1) + 1]
pressCH4_incoming = pressCH4[:len(s_positiveb1) + 1]
pressCO2_incoming = pressCO2[:len(s_positiveb1) + 1]
s_incoming = s_positiveb1
if pFile.count("LSS"):
press_tot_incomingbeam = totalPress[::-1]
print s_incoming[:100], press_tot_incomingbeam[:100]
xlist, ylist, col, mstyle, lg = s_incoming, press_tot_incomingbeam, cols[
i], 20 + i, lText + 'total'
grs += [makeTGraph(xlist, ylist, col, mstyle)]
mlegend.AddEntry(grs[-1], lg, lm)
mg.Add(grs[-1])
print "plot added"
# xlist, ylist, col, mstyle, lg = s_incoming,pressH2_incoming , cols[i]+1, 20,lText + 'H2'
# grs += [ makeTGraph(xlist, ylist, col, mstyle)]
# mlegend.AddEntry(grs[-1], lg, lm)
# mg.Add(grs[-1])
# xlist, ylist, col, mstyle, lg = s_incoming,pressCH4_incoming , cols[i]+2, 20,lText + 'CH4'
# grs += [ makeTGraph(xlist, ylist, col, mstyle)]
# mlegend.AddEntry(grs[-1], lg, lm)
# mg.Add(grs[-1])
# xlist, ylist, col, mstyle, lg = s_incoming,pressCO2_incoming , cols[i]+2, 20,lText + 'CO2'
# grs += [ makeTGraph(xlist, ylist, col, mstyle)]
# mlegend.AddEntry(grs[-1], lg, lm)
# mg.Add(grs[-1])
# xlist, ylist, col, mstyle, lg = s_incoming,pressCO_incoming , cols[i]+2, 20,lText + 'CO'
# grs += [ makeTGraph(xlist, ylist, col, mstyle)]
# mlegend.AddEntry(grs[-1], lg, lm)
# mg.Add(grs[-1])
mg.Draw("al")
#mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle(xTitle)
mg.GetYaxis().SetTitle("total interaction probability")
#mg.GetYaxis().SetTitle("total pressure [mbar]")
mg.GetYaxis().SetRangeUser(5e-18, 4e-10)
#mg.GetYaxis().SetRangeUser(5e-15,4e-3)
mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.42, 0.82, 'incoming beams')
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/6500GeV/'
pname = rel + ".pdf"
print('Saving file as ' + pname)
cv.Print(pname)
def cv45():
# current path
cpath = workpath + 'runs/checkTrajectory6500GeV/4TeV/'
cpath = '/afs/cern.ch/project/lhc_mib/beamgas/6500GeV_beamsize/'
cpath = thispath +
trakfiles = [
# filen name, Xindex, Yindex, markerstyle,
# ['/afs/cern.ch/work/r/rkwee/HL-LHC/runs/checkTrajectory6500GeV/madSY_b2.dat', 0,1, kGreen+1, 21, ],
# [cpath + 'ir1b2_exp001_TRAKFILE.luigi', 2,1, kBlue+1, 27, ],
# [cpath + 'ir1b2_exp001_TRAKFILE.145', 2,1, kBlue+1, 23, ],
# [cpath + 'madSYX_b2_thin.dat', 0,1, kGreen-1, 21, 'madx thin seq'], #plots x:s 2,0, 1,0 plots y:s
# [cpath + 'madSYX_b2_thick.dat', 0,1, kBlue-1, 22, 'madx thick seq'],
# [cpath + 'ir1_4TeV_settings_from_TWISS_20MeV_b1001_TRAKFILE', 2,1, kRed, 20, 'fluka incoming proton'], # 2,0 plots x:s 1,0 plots y:s]
# [cpath + 'ir1_4TeV_settings_from_TWISS_20MeV_b1_MYM001_TRAKFILE', 2,1, kMagenta, 23, 'fluka outgoing aproton'], # 2,0 plots x:s 1,0 plots y:s
# [cpath + 'ir1_4TeV_settings_from_TWISS_20MeV_b1001_TRAKFILE', 2,0, kRed, 20, 'fluka incoming proton'], # 2,0 plots x:s 1,0 plots y:s]
# [cpath + 'ir1_4TeV_settings_from_TWISS_20MeV_b1_MYM001_TRAKFILE', 2,0, kMagenta, 23, 'fluka outgoing aproton'], # 2,0 plots x:s 1,0 plots y:s
# [cpath + 'ir1_4TeV_settings_from_TWISS_20MeV_b1_MYM001_fort.89', 5,4, kBlack, 6, 'test size'], # 0cx 1cy 2cz 3x 4y 5z 6J 7A
# [cpath + 'ir1_4TeV_settings_from_TWISS_20MeV_b1_orbitDump001_fort.89', 5,4, kBlack, 6, 'test size'], # 0cx 1cy 2cz 3x 4y 5z 6J 7A
# [cpath + 'ir1_4TeV_settings_from_TWISS_20MeV_b1_orbitDump001_fort.89', 5,3, kBlack, 6, 'test size'], # 0cx 1cy 2cz 3x 4y 5z 6J 7A
# [cpath + 'BEAMGAS.dat', 2,1, kBlack, 6, 'input final BEAMGAS', '_yBEAMGAS', 'y cm'], # 0x 1y 2z 3u 4v
# [cpath + 'BEAMGAS.dat', 2,0, kBlack, 6, 'input final BEAMGAS', '_xBEAMGAS', 'x cm'], # 0x 1y 2z 3u 4v
# [cpath + 'startBG.dat', 2,1, kBlack, 6, 'input fluka startBG'], # 0x 1y 2z 3u 4v
# [cpath + 'startBG.dat', 2,0, kBlack, 6, 'input fluka startBG'], # 0x 1y 2z 3u 4v
# [cpath + 'THISISIT.dat', 5,4, kBlack, 6, 'input THISISIT', '_yTHISISIT', 'y cm'], # 0x 1y 2z 3u 4v
# [cpath + 'THISISIT.dat', 2,0, kBlack, 6, 'input THISISIT', '_xTHISISIT', 'x cm'], # 0x 1y 2z 3u 4v
# [cpath + 'BGAS10.dat', 2,1, kBlack, 6, 'input final BEAMGAS', '_yBGAS10', 'y cm'], # 0x 1y 2z 3u 4v
# [cpath + 'BGAS10.dat', 2,0, kBlack, 6, 'input final BEAMGAS', '_xBGAS10', 'x cm'], # 0x 1y 2z 3u 4v
# [cpath + 'BGAS.dat', 2,1, kBlack, 6, 'input final BEAMGAS', '_yBGAS', 'y cm'], # 0x 1y 2z 3u 4v repls
#[cpath + 'awked_downselected_fort.89.10.cv53', 2,1, kBlack, 6, 'y-orbit at 6.5 TeV', '_yBGAS', 'y [cm]'], # 0x 1y 2z 3u 4v repls
[cpath + 'awked_downselected_fort.89.10.cv53', 2,0, kBlack, 6, 'x-orbit at 6.5 TeV', '_xBGAS', 'x [cm]'], # 0x 1y 2z 3u 4v repls
]
energy = "6.5 TeV"
rel = ''
ytitle = ''
XurMin, XurMax = 150.,250. # zoom into badly increased beamsize region
XurMin, XurMax = 20,80
#XurMin, XurMax = -1, -1
YurMin, YurMax = -10.5,-9.2 # zoom into badly increased beamsize region
YurMin, YurMax = -0.5, 0.5
#YurMin, YurMax = -0.02, 0.7
#YurMin, YurMax = -1,-1
cv = TCanvas( 'cv', 'cv', 1000, 600)
x1, y1, x2, y2 = 0.34, 0.65, 0.9, 0.9
mlegend = TLegend( x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph()
# marker in legend
lm = 'p'
gr = []
for fn,Xindex,Yindex,color,mStyle,lg,rel,ytitle in trakfiles:
print 'opening', fn
[S,Y] = helpers.getListFromColumn([Xindex,Yindex], fn)
xList, yList = S,Y
xinmeter = [x*0.01 for x in xList]
gr += [ makeTGraph(xinmeter, yList, color, mStyle) ]
mlegend.AddEntry(gr[-1], lg, lm)
mg.Add(gr[-1])
mg.Draw("a"+lm)
mg.GetYaxis().SetTitle(ytitle)
mg.GetXaxis().SetTitle('s [m]')
if XurMin != -1:
mg.GetXaxis().SetRangeUser(XurMin,XurMax)
rel += 'ZoomX'
if YurMin != -1:
mg.GetYaxis().SetRangeUser(YurMin,YurMax)
rel += 'ZoomY'
#mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.45, 0.955,lg)
cpath = '/afs/cern.ch/user/r/rkwee/public/www/HL-LHC/TCT/6.5TeV/beamgas/'
pname = cpath + 'inputFluka6500GeV'+rel+'.root'
pname = cpath + 'inputFluka6500GeV'+rel+'.pdf'
print('Saving file as ' + pname )
cv.Print(pname)
pname = cpath + 'inputFluka6500GeV'+rel+'.png'
print('Saving file as ' + pname )
cv.Print(pname)
def cv83():
# ---------------------------------------------------
rel = 'compallpint'
#rel = 'compallpress'
cv = TCanvas('cv' + rel, 'cv' + rel, 1500, 900)
cv.SetLogy(1)
cv.SetGridy(0)
x1, y1, x2, y2 = 0.67, 0.72, 0.88, 0.92
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph(rel, rel)
lm = 'l'
grs = []
for i, (pFile, xTitle, lText) in enumerate(pData):
print "." * 33
print "Getting data from file", pFile
data = {}
if pFile.count("2736"):
data = cv32.getdata14c(pFile)
stmp, rho_C, rho_H, rho_O = cv65.getAtomicRho(data)
stmp2 = stmp[1:]
s_full = stmp2[::-1]
pint_C, pint_H, pint_O, pint_tot = cv65.calc_pint_tot(
rho_C, rho_H, rho_O)
totalPress = [
data['H2_N2Eq'][j] + data['CH4_N2Eq'][j] + data['CO_N2Eq'][j] +
data['CO2_N2Eq'][j] for j in range(len(data['H2_N2Eq']))
]
elif pFile.count("Density_Fill4"):
data = cv79.getdata5c(pFile)
totalPress = cv79.getTotalPressure(data)
rho_H2, rho_CH4, rho_CO, rho_CO2 = cv79.getrho(
data['H2_Eq']), cv79.getrho(data['CH4_Eq']), cv79.getrho(
data['CO_Eq']), cv79.getrho(data['CO2_Eq'])
rho_H, rho_C, rho_O = cv79.getAtomicRho(rho_H2, rho_CH4, rho_CO,
rho_CO2)
pint_H, pint_C, pint_O, pint_tot = cv79.getpint(
rho_H, rho_C, rho_O)
s_full = data['s']
elif pFile.count("HL_LHC"):
# will only work for pint
data = cv95.getdata14cHL(pFile)
rho_H2 = cv79.getrho(data['H2_N2Eq'])
rho_CH4 = cv79.getrho(data['CH4_N2Eq'])
rho_CO2 = cv79.getrho(data['CO2_N2Eq'])
rho_CO = cv79.getrho(data['CO_N2Eq'])
rho_H, rho_C, rho_O = cv79.getAtomicRho(rho_H2, rho_CH4, rho_CO,
rho_CO2)
pint_H, pint_C, pint_O, pint_tot = cv79.getpint(
rho_H, rho_C, rho_O)
stmp = data["s"]
s_full = list(reversed(list(
reversed(stmp)))) # list last element of reversed list first
s_incoming = []
pint_incoming, pint_tot_incomingbeam = [], []
# only one side, chose positive s
s_positiveb1, s_positiveb2 = [], []
#print s_full
for cs in s_full:
s = float(cs)
if s < 0.:
s_positiveb1 += [-s]
else:
s_positiveb2 += [s]
print "len(s_positiveb1)", len(s_positiveb1)
print "len(s_positiveb2)", len(s_positiveb2)
if lText.count("B2"):
pint_tot_incomingbeam = pint_tot[len(s_positiveb2):]
press_tot_incomingbeam = totalPress[len(s_positiveb2):]
s_incoming = s_positiveb2[:len(s_positiveb2) - 1]
else:
pint_tot_incomingbeam = [
p for p in pint_tot[:len(s_positiveb1) + 1]
]
if not pFile.count("HL_LHC"):
press_tot_incomingbeam = [
p for p in totalPress[:len(s_positiveb1) + 1]
]
s_incoming = s_positiveb1
if pFile.count("2736"):
pint_tot_incomingbeam = pint_tot_incomingbeam[::-1]
press_tot_incomingbeam = totalPress[::-1]
print "len(pint_tot_incomingbeam)", len(pint_tot_incomingbeam)
print "len(s_incoming)", len(s_incoming)
print i, cols
# print s_incoming[:100],press_tot_incomingbeam[:100]
xlist, ylist, col, mstyle, lg = s_incoming, pint_tot_incomingbeam, cols[
i], 20 + i, lText
#xlist, ylist, col, mstyle, lg = s_incoming,press_tot_incomingbeam , cols[i],20+i, lText
grs += [makeTGraph(xlist, ylist, col, mstyle)]
mlegend.AddEntry(grs[-1], lg, lm)
mg.Add(grs[-1])
mg.Draw("al")
Tt = TLatex()
Tt = "#splitline{interaction probability density}{[1/proton/m/s]}"
#mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle(xTitle)
mg.GetYaxis().SetTitle(Tt)
#mg.GetYaxis().SetTitle("total pressure [mbar]")
mg.GetYaxis().SetRangeUser(5e-18, 4e-10)
#mg.GetYaxis().SetRangeUser(5e-13,4e-6)
mg.GetXaxis().SetRangeUser(0, 260)
mlegend.Draw()
lab = mylabel(42)
lab.DrawLatex(0.42, 0.82, 'incoming beams')
s = 22.6
lInterface = TLine()
lInterface.SetLineStyle(2)
lInterface.SetLineColor(kGray + 3)
YurMin, YurMax = 5e-18, 4e-10
lInterface.DrawLine(s, YurMin, s, YurMax)
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/6500GeV/reweighted/'
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/HLRunII/'
pname = '/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLLHCBackgroundPaper/figures/'
pname += rel + ".pdf"
print('Saving file as ' + pname)
cv.Print(pname)
def cv65():
# --------------------------------------------------------------------------------
# density profile is given in the following format:
# densities per molecule as function of s-coordinate
# x,y,z, cx, cy, cz as function of (different s-coordinate)
# merge densities with coordinates
# note, that the source routine needs fluka units, ie *cm*!
# --------------------------------------------------------------------------------
bgfile = '/afs/cern.ch/work/r/rkwee/HL-LHC/beam-gas-sixtrack/pressure_profiles_2012/LSS1_B1_Fill2736_Final.csv'
bgfile = '/Users/rkwee/Documents/RHUL/work/data/4TeV/LSS1_B1_Fill2736_Final.csv'
data = getdata14c(bgfile)
print 'data keys are', data.keys()
# --
s, rho_C, rho_H, rho_O = getAtomicRho(data)
# plot atomic densities
cv = TCanvas('cv', 'cv', 2100, 900)
x1, y1, x2, y2 = 0.8, 0.7, 0.9, 0.92
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.035)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph()
lm = 'pl'
pint_C, pint_H, pint_O, pint_tot = calc_pint_tot(rho_C, rho_H, rho_O)
xlist, ylist, col, mstyle, lg = s[1:], pint_tot, kBlack, 28, 'total'
g3 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g3, lg, lm)
mg.Add(g3)
xlist, ylist, col, mstyle, lg = s[1:], pint_O, kGreen, 22, 'O'
g0 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g0, lg, lm)
mg.Add(g0)
xlist, ylist, col, mstyle, lg = s[1:], pint_C, kGreen - 1, 20, 'C'
g1 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g1, lg, lm)
mg.Add(g1)
xlist, ylist, col, mstyle, lg = s[1:], pint_H, kBlue - 2, 23, 'H'
g2 = makeTGraph(xlist, ylist, col, mstyle)
mlegend.AddEntry(g2, lg, lm)
mg.Add(g2)
mg.Draw("alp")
gPad.SetLogy(1)
gPad.RedrawAxis()
lab = mylabel(42)
lab.DrawLatex(0.45, 0.88, 'interaction probability')
mg.SetTitle("pressure profiles")
mg.GetXaxis().SetTitle('distance to IP1 [m]')
mg.GetYaxis().SetTitle('interaction probability [1/proton/m/s]'
) #"density #rho [atoms/m^{3}]")
mg.GetYaxis().SetRangeUser(7e-17, 9e-11)
mlegend.Draw()
pname = wwwpath + 'TCT/beamgas/pressure_profiles_2012/pint.pdf'
pname = "/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/4TeV/reweighted/cv65_pint.pdf"
pname = "/Users/rkwee/Documents/RHUL/work/HL-LHC/LHC-Collimation/Documentation/ATS/HLHaloBackgroundNote/figures/4TeV/reweighted/cv65_pint_2011.pdf"
print('Saving file as ' + pname)
cv.Print(pname)
def cv39():
gamma_rel = 4.e3 / 0.938
energy = '4TeV'
# twiss file
# tf = pymadx.Tfs('/afs/cern.ch/work/r/rkwee/HL-LHC/LHC-Collimation/SixTrackConfig/6.5TeV/MED800/B1/twiss_lhcb1_med_new_thin_800.tfs')
# tf = pymadx.Tfs('/afs/cern.ch/work/r/rkwee/HL-LHC/LHC-Collimation/SixTrackConfig/6.5TeV/MED800/B1/1cm/twiss_lhcb1_med_new_thin_800_1cm.tfs')
# tf = pymadx.Tfs("/afs/cern.ch/work/r/rkwee/HL-LHC/LHC-Collimation/SixTrackConfig/4TeV/beamgas/twiss_4tev_b1.data")
tf = pymadx.Tfs(
"/afs/cern.ch/work/r/rkwee/HL-LHC/LHC-Collimation/SixTrackConfig/6.5TeV/background_2015_80cm/MADX_2015/twiss_b2.tfs"
)
gamma_rel = 6.5e3 / 0.938
energy = "6.5TeV"
BETX = tf.GetColumn('BETX')
BETY = tf.GetColumn('BETY')
ALFX = tf.GetColumn('ALFX')
ALFY = tf.GetColumn('ALFY')
X = tf.GetColumn('X')
Y = tf.GetColumn('Y')
PX = tf.GetColumn('PX')
PY = tf.GetColumn('PY')
S = tf.GetColumn('S')
IP5 = tf.GetColumnDict('S')['IP5']
IP8 = tf.GetColumnDict('S')['IP8']
# no shift if val is length
shiftVal = length_LHC #-500
cnt = 0
S_shifted, X_shifted = [], []
for s in S:
s_shifted = s + shiftVal
#print "s_shifted", s_shifted
if s_shifted >= length_LHC:
cnt += 1
s_shifted -= length_LHC
#print "s_shifted after subtraction", s_shifted
S_shifted += [s_shifted]
#print "using", s_shifted
S_shifted.sort()
lShift = 0.5
XurMin, XurMax = 0, 548.
XurMin, XurMax = -1, -1
XurMin, XurMax = length_LHC - 500, length_LHC
# rel = '_sigma_IR1Right_1cm'
# rel = '_sigma_IR1Left_'+energy
rel = 'from_twiss_orbit_IR1'
# lShift = 0.0
# XurMin, XurMax = IP5-300, IP5+300
# rel = '_IP5'
# XurMin, XurMax = IP8-300, IP8+300
# rel = '_IP8'
cv = TCanvas('cv', 'cv', 2100, 900)
x1, y1, x2, y2 = 0.8 - lShift, 0.65, 0.9 - lShift, 0.9
mlegend = TLegend(x1, y1, x2, y2)
mlegend.SetFillColor(0)
mlegend.SetFillStyle(0)
mlegend.SetLineColor(0)
mlegend.SetTextSize(0.05)
mlegend.SetShadowColor(0)
mlegend.SetBorderSize(0)
mg = TMultiGraph()
# marker in legend
lm = 'l'
emittance_norm = 3.5e-6
emittance_geo = emittance_norm / gamma_rel
SIGX = [math.sqrt(betax * emittance_geo) for betax in BETX]
SIGY = [math.sqrt(betay * emittance_geo) for betay in BETY]
# xList, yList, color, mStyle, lg = S_shifted, SIGX, kGreen-1, 22, '#sigma_{x}'
# g0 = makeTGraph(xList, yList, color, mStyle)
# mlegend.AddEntry(g0, lg, lm)
# mg.Add(g0)
# xList, yList, color, mStyle, lg = S_shifted, SIGY, kGreen-2, 20, '#sigma_{y}'
# g1 = makeTGraph(xList, yList, color, mStyle)
# mlegend.AddEntry(g1, lg, lm)
# mg.Add(g1)
ytitle = 'beam size [m]'
xList, yList, color, mStyle, lg = S_shifted, X, kGreen + 1, 21, "x [m]"
g1 = makeTGraph(xList, yList, color, mStyle)
mlegend.AddEntry(g1, lg, lm)
mg.Add(g1)
xList, yList, color, mStyle, lg = S_shifted, Y, kBlue - 1, 20, "y [m]"
g2 = makeTGraph(xList, yList, color, mStyle)
mlegend.AddEntry(g2, lg, lm)
mg.Add(g2)
ytitle = 'orbit'
# xList, yList, color, mStyle, lg = S_shifted, PY, kBlue+1, 27, "y'"
# g3 = makeTGraph(xList, yList, color, mStyle)
# mlegend.AddEntry(g3, lg, lm)
# mg.Add(g3)
mg.Draw("a" + lm)
l = TLine()
l.SetLineStyle(1)
YurMin, YurMax = 0, 0.0019
l.SetLineColor(kRed)
# s = 22.6
# l.DrawLine(s,YurMin,s,YurMax)
# s = 59.
# l.DrawLine(s,YurMin,s,YurMax)
# s = 153.
# l.DrawLine(s,YurMin,s,YurMax)
# s = 269.
# l.DrawLine(s,YurMin,s,YurMax)
mg.GetYaxis().SetTitle(ytitle)
mg.GetXaxis().SetTitle('s [m]')
if XurMin != -1:
mg.GetXaxis().SetRangeUser(XurMin, XurMax)
mlegend.Draw()
pname = wwwpath
subfolder = 'TCT/' + energy + '/beamgas/'
pname += subfolder + ytitle + '_' + rel.replace(".", "p") + '.pdf'
print('Saving file as ' + pname)
cv.Print(pname)
pname = wwwpath
subfolder = 'TCT/' + energy + '/beamgas/'
pname += subfolder + 'from_twiss_' + rel.replace(".", "p") + '.png'
print('Saving file as ' + pname)
cv.Print(pname)