SERVICE_LEARN = "learn_command"
SWITCH_SCHEMA = vol.Schema({
vol.Optional(CONF_COMMAND_OFF, default=None):
cv.string,
vol.Optional(CONF_COMMAND_ON, default=None):
cv.string,
vol.Optional(CONF_FRIENDLY_NAME, default=DEFAULT_NAME):
cv.string,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_SWITCHES):
vol.Schema({cv.slug: SWITCH_SCHEMA}),
vol.Required(CONF_HOST):
cv.string,
vol.Required(CONF_MAC):
cv.string,
vol.Optional(CONF_TIMEOUT, default=DEFAULT_TIMEOUT):
cv.positive_int
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES, {})
switches = []
ip_addr = config.get(CONF_HOST)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
from homeassistant.components.switch import (SwitchDevice, PLATFORM_SCHEMA)
from homeassistant.const import (CONF_SWITCHES, CONF_ZONE,
CONF_FRIENDLY_NAME, CONF_TRIGGER_TIME,
CONF_SCAN_INTERVAL)
from homeassistant.helpers import config_validation as cv
DEPENDENCIES = ['rainbird']
DOMAIN = 'rainbird'
_LOGGER = logging.getLogger(__name__)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_SWITCHES, default={}): vol.Schema({
cv.string: {
vol.Optional(CONF_FRIENDLY_NAME): cv.string,
vol.Required(CONF_ZONE): cv.string,
vol.Required(CONF_TRIGGER_TIME): cv.string,
vol.Optional(CONF_SCAN_INTERVAL): cv.string,
},
}),
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up Rain Bird switches over a Rain Bird controller."""
controller = hass.data[DATA_RAINBIRD]
devices = []
for dev_id, switch in config.get(CONF_SWITCHES).items():
devices.append(RainBirdSwitch(controller, switch, dev_id))
add_devices(devices, True)
_LOGGER = logging.getLogger(__name__)
DEFAULT_NAME = 'Xiaomi Miio Switch'
DATA_KEY = 'switch.xiaomi_miio'
CONF_MODEL = 'model'
MODEL_POWER_STRIP_V2 = 'zimi.powerstrip.v2'
MODEL_PLUG_V3 = 'chuangmi.plug.v3'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST): cv.string,
vol.Required(CONF_TOKEN): vol.All(cv.string, vol.Length(min=32, max=32)),
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_MODEL): vol.In(
['chuangmi.plug.v1',
'qmi.powerstrip.v1',
'zimi.powerstrip.v2',
'chuangmi.plug.m1',
'chuangmi.plug.v2',
'chuangmi.plug.v3',
]),
})
ATTR_POWER = 'power'
ATTR_TEMPERATURE = 'temperature'
ATTR_LOAD_POWER = 'load_power'
ATTR_MODEL = 'model'
ATTR_MODE = 'mode'
ATTR_POWER_MODE = 'power_mode'
ATTR_WIFI_LED = 'wifi_led'
ATTR_POWER_PRICE = 'power_price'
import homeassistant.helpers.config_validation as cv
from homeassistant.components.switch import (SwitchDevice, PLATFORM_SCHEMA)
from homeassistant.components.linode import (
CONF_NODES, ATTR_CREATED, ATTR_NODE_ID, ATTR_NODE_NAME,
ATTR_IPV4_ADDRESS, ATTR_IPV6_ADDRESS, ATTR_MEMORY,
ATTR_REGION, ATTR_VCPUS, DATA_LINODE)
_LOGGER = logging.getLogger(__name__)
DEPENDENCIES = ['linode']
DEFAULT_NAME = 'Node'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_NODES): vol.All(cv.ensure_list, [cv.string]),
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Linode Node switch."""
linode = hass.data.get(DATA_LINODE)
nodes = config.get(CONF_NODES)
dev = []
for node in nodes:
node_id = linode.get_node_id(node)
if node_id is None:
_LOGGER.error("Node %s is not available", node)
return
dev.append(LinodeSwitch(linode, node_id))
LOAD_CMD = "load-module module-loopback sink={0} source={1}"
MIN_TIME_BETWEEN_FORCED_SCANS = timedelta(milliseconds=100)
MIN_TIME_BETWEEN_SCANS = timedelta(seconds=10)
MOD_REGEX = r"index: ([0-9]+)\s+name: <module-loopback>" \
r"\s+argument: (?=<.*sink={0}.*>)(?=<.*source={1}.*>)"
UNLOAD_CMD = "unload-module {0}"
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_SINK_NAME): cv.string,
vol.Required(CONF_SOURCE_NAME): cv.string,
vol.Optional(CONF_BUFFER_SIZE, default=DEFAULT_BUFFER_SIZE):
cv.positive_int,
vol.Optional(CONF_HOST, default=DEFAULT_HOST): cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
vol.Optional(CONF_TCP_TIMEOUT, default=DEFAULT_TCP_TIMEOUT):
cv.positive_int,
})
# pylint: disable=unused-argument
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Read in all of our configuration, and initialize the loopback switch."""
name = config.get(CONF_NAME)
sink_name = config.get(CONF_SINK_NAME)
source_name = config.get(CONF_SOURCE_NAME)
host = config.get(CONF_HOST)
port = config.get(CONF_PORT)
DEFAULT_PROTOCOL = 1
DEFAULT_SIGNAL_REPETITIONS = 10
SWITCH_SCHEMA = vol.Schema({
vol.Required(CONF_CODE_OFF):
vol.All(cv.ensure_list_csv, [cv.positive_int]),
vol.Required(CONF_CODE_ON):
vol.All(cv.ensure_list_csv, [cv.positive_int]),
vol.Optional(CONF_PULSELENGTH): cv.positive_int,
vol.Optional(CONF_SIGNAL_REPETITIONS,
default=DEFAULT_SIGNAL_REPETITIONS): cv.positive_int,
vol.Optional(CONF_PROTOCOL, default=DEFAULT_PROTOCOL): cv.positive_int,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_GPIO): cv.positive_int,
vol.Required(CONF_SWITCHES): vol.Schema({cv.string: SWITCH_SCHEMA}),
})
# pylint: disable=no-member
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Find and return switches controlled by a generic RF device via GPIO."""
import rpi_rf
from threading import RLock
gpio = config.get(CONF_GPIO)
rfdevice = rpi_rf.RFDevice(gpio)
rfdevice_lock = RLock()
switches = config.get(CONF_SWITCHES)
devices = []
# Standard Fritz Box IP
DEFAULT_HOST = 'fritz.box'
ATTR_CURRENT_CONSUMPTION = 'current_consumption'
ATTR_CURRENT_CONSUMPTION_UNIT = 'current_consumption_unit'
ATTR_CURRENT_CONSUMPTION_UNIT_VALUE = 'W'
ATTR_TOTAL_CONSUMPTION = 'total_consumption'
ATTR_TOTAL_CONSUMPTION_UNIT = 'total_consumption_unit'
ATTR_TOTAL_CONSUMPTION_UNIT_VALUE = 'kWh'
ATTR_TEMPERATURE_UNIT = 'temperature_unit'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_HOST, default=DEFAULT_HOST): cv.string,
vol.Required(CONF_USERNAME): cv.string,
vol.Required(CONF_PASSWORD): cv.string,
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Add all switches connected to Fritz Box."""
from fritzhome.fritz import FritzBox
host = config.get(CONF_HOST)
username = config.get(CONF_USERNAME)
password = config.get(CONF_PASSWORD)
# Log into Fritz Box
fritz = FritzBox(host, username, password)
try:
_LOGGER = logging.getLogger(__name__)
CONF_PINS = "pins"
CONF_INITIAL = "initial"
CONF_INVERT_LOGIC = "invert_logic"
PIN_SCHEMA = vol.Schema({
vol.Required(CONF_NAME):
cv.string,
vol.Optional(CONF_INITIAL, default=False):
cv.boolean,
vol.Optional(CONF_INVERT_LOGIC, default=False):
cv.boolean,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{vol.Required(CONF_PINS, default={}): vol.Schema({cv.string: PIN_SCHEMA})})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the BeagleBone Black GPIO devices."""
pins = config.get(CONF_PINS)
switches = []
for pin, params in pins.items():
switches.append(BBBGPIOSwitch(pin, params))
add_entities(switches)
class BBBGPIOSwitch(ToggleEntity):
"""Representation of a BeagleBone Black GPIO."""
def __init__(self, pin, params):
_LOGGER = logging.getLogger(__name__)
_VALID_STATES = [STATE_ON, STATE_OFF, 'true', 'false']
ON_ACTION = 'turn_on'
OFF_ACTION = 'turn_off'
SWITCH_SCHEMA = vol.Schema({
vol.Required(CONF_VALUE_TEMPLATE): cv.template,
vol.Required(ON_ACTION): cv.SCRIPT_SCHEMA,
vol.Required(OFF_ACTION): cv.SCRIPT_SCHEMA,
vol.Optional(ATTR_FRIENDLY_NAME): cv.string,
vol.Optional(ATTR_ENTITY_ID): cv.entity_ids
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_SWITCHES):
vol.Schema({cv.slug: SWITCH_SCHEMA}),
})
@asyncio.coroutine
# pylint: disable=unused-argument
def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
"""Set up the Template switch."""
switches = []
for device, device_config in config[CONF_SWITCHES].items():
friendly_name = device_config.get(ATTR_FRIENDLY_NAME, device)
state_template = device_config[CONF_VALUE_TEMPLATE]
on_action = device_config[ON_ACTION]
off_action = device_config[OFF_ACTION]
entity_ids = (device_config.get(ATTR_ENTITY_ID)
import voluptuous as vol
from homeassistant.components.switch import PLATFORM_SCHEMA, SwitchDevice
from homeassistant.const import CONF_COMMAND_OFF, CONF_COMMAND_ON
import homeassistant.helpers.config_validation as cv
from . import DOMAIN as ZONEMINDER_DOMAIN
_LOGGER = logging.getLogger(__name__)
DEPENDENCIES = ['zoneminder']
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_COMMAND_ON):
cv.string,
vol.Required(CONF_COMMAND_OFF):
cv.string,
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the ZoneMinder switch platform."""
from zoneminder.monitor import MonitorState
on_state = MonitorState(config.get(CONF_COMMAND_ON))
off_state = MonitorState(config.get(CONF_COMMAND_OFF))
switches = []
for zm_client in hass.data[ZONEMINDER_DOMAIN].values():
monitors = zm_client.get_monitors()
if not monitors:
_LOGGER.warning("Could not fetch monitors from ZoneMinder")
from homeassistant.helpers.entity import ToggleEntity
import homeassistant.helpers.config_validation as cv
_LOGGER = logging.getLogger(__name__)
CONF_PULL_MODE = "pull_mode"
CONF_PORTS = "ports"
CONF_INVERT_LOGIC = "invert_logic"
DEFAULT_INVERT_LOGIC = False
_SWITCHES_SCHEMA = vol.Schema({cv.positive_int: cv.string})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_PORTS):
_SWITCHES_SCHEMA,
vol.Optional(CONF_INVERT_LOGIC, default=DEFAULT_INVERT_LOGIC):
cv.boolean,
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Raspberry PI GPIO devices."""
invert_logic = config.get(CONF_INVERT_LOGIC)
switches = []
ports = config.get(CONF_PORTS)
for port, name in ports.items():
switches.append(RPiGPIOSwitch(name, port, invert_logic))
add_entities(switches)
MIN_TIME_BETWEEN_FORCED_SCANS = timedelta(milliseconds=100)
MIN_TIME_BETWEEN_SCANS = timedelta(seconds=10)
MOD_REGEX = r"index: ([0-9]+)\s+name: <module-loopback>" \
r"\s+argument: (?=<.*sink={0}.*>)(?=<.*source={1}.*>)"
UNLOAD_CMD = "unload-module {0}"
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_SINK_NAME):
cv.string,
vol.Required(CONF_SOURCE_NAME):
cv.string,
vol.Optional(CONF_BUFFER_SIZE, default=DEFAULT_BUFFER_SIZE):
cv.positive_int,
vol.Optional(CONF_HOST, default=DEFAULT_HOST):
cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_PORT, default=DEFAULT_PORT):
cv.port,
vol.Optional(CONF_TCP_TIMEOUT, default=DEFAULT_TCP_TIMEOUT):
cv.positive_int,
})
# pylint: disable=unused-argument
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Read in all of our configuration, and initialize the loopback switch."""
name = config.get(CONF_NAME)
sink_name = config.get(CONF_SINK_NAME)
source_name = config.get(CONF_SOURCE_NAME)
Device = namedtuple('device', ['netio', 'entities'])
DEVICES = {}
MIN_TIME_BETWEEN_SCANS = timedelta(seconds=10)
REQ_CONF = [CONF_HOST, CONF_OUTLETS]
URL_API_NETIO_EP = '/api/netio/{host}'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST):
cv.string,
vol.Required(CONF_PORT, default=DEFAULT_PORT):
cv.port,
vol.Required(CONF_USERNAME, default=DEFAULT_USERNAME):
cv.string,
vol.Required(CONF_PASSWORD):
cv.string,
vol.Optional(CONF_OUTLETS): {
cv.string: cv.string
},
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Configure the Netio platform."""
from pynetio import Netio
host = config.get(CONF_HOST)
username = config.get(CONF_USERNAME)
password = config.get(CONF_PASSWORD)
DEFAULT_TIMEOUT = 10
SUPPORT_REST_METHODS = ['post', 'put']
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_RESOURCE):
cv.url,
vol.Optional(CONF_HEADERS): {
cv.string: cv.string
},
vol.Optional(CONF_BODY_OFF, default=DEFAULT_BODY_OFF):
cv.template,
vol.Optional(CONF_BODY_ON, default=DEFAULT_BODY_ON):
cv.template,
vol.Optional(CONF_IS_ON_TEMPLATE):
cv.template,
vol.Optional(CONF_METHOD, default=DEFAULT_METHOD):
vol.All(vol.Lower, vol.In(SUPPORT_REST_METHODS)),
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_TIMEOUT, default=DEFAULT_TIMEOUT):
cv.positive_int,
vol.Inclusive(CONF_USERNAME, 'authentication'):
cv.string,
vol.Inclusive(CONF_PASSWORD, 'authentication'):
cv.string,
})
# pylint: disable=unused-argument
@asyncio.coroutine
"""Support for ZoneMinder switches."""
import logging
import voluptuous as vol
from homeassistant.components.switch import (SwitchDevice, PLATFORM_SCHEMA)
from homeassistant.components.zoneminder import DOMAIN as ZONEMINDER_DOMAIN
from homeassistant.const import (CONF_COMMAND_ON, CONF_COMMAND_OFF)
import homeassistant.helpers.config_validation as cv
_LOGGER = logging.getLogger(__name__)
DEPENDENCIES = ['zoneminder']
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_COMMAND_ON): cv.string,
vol.Required(CONF_COMMAND_OFF): cv.string,
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the ZoneMinder switch platform."""
from zoneminder.monitor import MonitorState
on_state = MonitorState(config.get(CONF_COMMAND_ON))
off_state = MonitorState(config.get(CONF_COMMAND_OFF))
switches = []
for zm_client in hass.data[ZONEMINDER_DOMAIN].values():
monitors = zm_client.get_monitors()
if not monitors:
_LOGGER.warning("Could not fetch monitors from ZoneMinder")
return
DATA_KEY = "switch.xiaomi_miio"
CONF_MODEL = "model"
MODEL_POWER_STRIP_V2 = "zimi.powerstrip.v2"
MODEL_PLUG_V3 = "chuangmi.plug.v3"
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST):
cv.string,
vol.Required(CONF_TOKEN):
vol.All(cv.string, vol.Length(min=32, max=32)),
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_MODEL):
vol.In([
"chuangmi.plug.v1",
"qmi.powerstrip.v1",
"zimi.powerstrip.v2",
"chuangmi.plug.m1",
"chuangmi.plug.m3",
"chuangmi.plug.v2",
"chuangmi.plug.v3",
"chuangmi.plug.hmi205",
"lumi.acpartner.v3",
]),
})
ATTR_POWER = "power"
ATTR_TEMPERATURE = "temperature"
ATTR_LOAD_POWER = "load_power"
ATTR_MODEL = "model"
ATTR_MODE = "mode"
# Commands known to the projector
CMD_DICT = {
LAMP: '* 0 Lamp ?\r',
LAMP_HOURS: '* 0 Lamp\r',
INPUT_SOURCE: '* 0 Src ?\r',
ECO_MODE: '* 0 IR 052\r',
MODEL: '* 0 IR 035\r',
STATE_ON: '* 0 IR 001\r',
STATE_OFF: '* 0 IR 002\r',
}
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_FILENAME): cv.isdevice,
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_TIMEOUT, default=DEFAULT_TIMEOUT): cv.positive_int,
vol.Optional(CONF_WRITE_TIMEOUT, default=DEFAULT_WRITE_TIMEOUT):
cv.positive_int,
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Connect with serial port and return Acer Projector."""
serial_port = config.get(CONF_FILENAME)
name = config.get(CONF_NAME)
timeout = config.get(CONF_TIMEOUT)
write_timeout = config.get(CONF_WRITE_TIMEOUT)
add_devices([AcerSwitch(serial_port, name, timeout, write_timeout)], True)
DEFAULT_TIMEOUT = 10
DEFAULT_VERIFY_SSL = True
SUPPORT_REST_METHODS = ["post", "put", "patch"]
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{
vol.Exclusive(CONF_RESOURCE, CONF_RESOURCE): cv.url,
vol.Exclusive(CONF_RESOURCE_TEMPLATE, CONF_RESOURCE): cv.template,
vol.Exclusive(CONF_STATE_RESOURCE, CONF_STATE_RESOURCE): cv.string,
vol.Exclusive(CONF_STATE_RESOURCE_TEMPLATE, CONF_STATE_RESOURCE): cv.template,
vol.Optional(CONF_HEADERS): {cv.string: cv.template},
vol.Optional(CONF_PARAMS): {cv.string: cv.template},
vol.Optional(CONF_BODY_OFF, default=DEFAULT_BODY_OFF): cv.template,
vol.Optional(CONF_BODY_ON, default=DEFAULT_BODY_ON): cv.template,
vol.Optional(CONF_IS_ON_TEMPLATE): cv.template,
vol.Optional(CONF_METHOD, default=DEFAULT_METHOD): vol.All(
vol.Lower, vol.In(SUPPORT_REST_METHODS)
),
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_DEVICE_CLASS): DEVICE_CLASSES_SCHEMA,
vol.Optional(CONF_TIMEOUT, default=DEFAULT_TIMEOUT): cv.positive_int,
vol.Inclusive(CONF_USERNAME, "authentication"): cv.string,
vol.Inclusive(CONF_PASSWORD, "authentication"): cv.string,
vol.Optional(CONF_VERIFY_SSL, default=DEFAULT_VERIFY_SSL): cv.boolean,
}
)
async def async_setup_platform(hass, config, async_add_entities, discovery_info=None):
"""Set up the RESTful switch."""
body_off = config.get(CONF_BODY_OFF)
import voluptuous as vol
from homeassistant.components.switch import PLATFORM_SCHEMA
from homeassistant.const import (CONF_NAME, CONF_ID)
from homeassistant.components import enocean
from homeassistant.helpers.entity import ToggleEntity
import homeassistant.helpers.config_validation as cv
_LOGGER = logging.getLogger(__name__)
DEFAULT_NAME = 'EnOcean Switch'
DEPENDENCIES = ['enocean']
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_ID): vol.All(cv.ensure_list, [vol.Coerce(int)]),
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up the EnOcean switch platform."""
dev_id = config.get(CONF_ID)
devname = config.get(CONF_NAME)
add_devices([EnOceanSwitch(dev_id, devname)])
class EnOceanSwitch(enocean.EnOceanDevice, ToggleEntity):
"""Representation of an EnOcean switch device."""
def __init__(self, dev_id, devname):
DATA_KEY = 'switch.xiaomi_miio'
CONF_MODEL = 'model'
MODEL_POWER_STRIP_V2 = 'zimi.powerstrip.v2'
MODEL_PLUG_V3 = 'chuangmi.plug.v3'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST):
cv.string,
vol.Required(CONF_TOKEN):
vol.All(cv.string, vol.Length(min=32, max=32)),
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_MODEL):
vol.In([
'chuangmi.plug.v1',
'qmi.powerstrip.v1',
'zimi.powerstrip.v2',
'chuangmi.plug.m1',
'chuangmi.plug.m3',
'chuangmi.plug.v2',
'chuangmi.plug.v3',
'chuangmi.plug.hmi205',
]),
})
ATTR_POWER = 'power'
ATTR_TEMPERATURE = 'temperature'
ATTR_LOAD_POWER = 'load_power'
ATTR_MODEL = 'model'
ATTR_MODE = 'mode'
from . import DEFAULT_ENTITY_NAMESPACE, DOMAIN as SKYBELL_DOMAIN, SkybellDevice
DEPENDENCIES = ['skybell']
_LOGGER = logging.getLogger(__name__)
# Switch types: Name
SWITCH_TYPES = {
'do_not_disturb': ['Do Not Disturb'],
'motion_sensor': ['Motion Sensor'],
}
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_ENTITY_NAMESPACE, default=DEFAULT_ENTITY_NAMESPACE):
cv.string,
vol.Required(CONF_MONITORED_CONDITIONS, default=[]):
vol.All(cv.ensure_list, [vol.In(SWITCH_TYPES)]),
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the platform for a Skybell device."""
skybell = hass.data.get(SKYBELL_DOMAIN)
sensors = []
for switch_type in config.get(CONF_MONITORED_CONDITIONS):
for device in skybell.get_devices():
sensors.append(SkybellSwitch(device, switch_type))
add_entities(sensors, True)
CONF_I2C_ADDRESS,
CONF_INVERT_LOGIC,
CONF_PINS,
DEFAULT_I2C_ADDRESS,
DEFAULT_INVERT_LOGIC,
DOMAIN,
)
_LOGGER = logging.getLogger(__name__)
_SWITCHES_SCHEMA = vol.Schema({cv.positive_int: cv.string})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{
vol.Required(CONF_PINS): _SWITCHES_SCHEMA,
vol.Optional(CONF_INVERT_LOGIC, default=DEFAULT_INVERT_LOGIC): cv.boolean,
vol.Optional(CONF_I2C_ADDRESS, default=DEFAULT_I2C_ADDRESS): vol.Coerce(int),
}
)
async def async_setup_platform(hass, config, async_add_entities, discovery_info=None):
"""Set up the MCP23017 for switch entities."""
for pin_number, pin_name in config[CONF_PINS].items():
hass.async_create_task(
hass.config_entries.flow.async_init(
DOMAIN,
context={"source": SOURCE_IMPORT},
data={
CONF_FLOW_PLATFORM: "switch",
DEFAULT_PORT = 1234
DEFAULT_USERNAME = '******'
DEPENDENCIES = ['http']
Device = namedtuple('device', ['netio', 'entities'])
DEVICES = {}
MIN_TIME_BETWEEN_SCANS = timedelta(seconds=10)
REQ_CONF = [CONF_HOST, CONF_OUTLETS]
URL_API_NETIO_EP = '/api/netio/{host}'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST): cv.string,
vol.Required(CONF_PORT, default=DEFAULT_PORT): cv.port,
vol.Required(CONF_USERNAME, default=DEFAULT_USERNAME): cv.string,
vol.Required(CONF_PASSWORD): cv.string,
vol.Optional(CONF_OUTLETS): {cv.string: cv.string},
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Netio platform."""
from pynetio import Netio
host = config.get(CONF_HOST)
username = config.get(CONF_USERNAME)
password = config.get(CONF_PASSWORD)
port = config.get(CONF_PORT)
if not DEVICES:
import voluptuous as vol
from homeassistant.components.ihc import (validate_name, IHC_DATA,
IHC_CONTROLLER, IHC_INFO)
from homeassistant.components.ihc.ihcdevice import IHCDevice
from homeassistant.components.switch import SwitchDevice, PLATFORM_SCHEMA
from homeassistant.const import CONF_ID, CONF_NAME, CONF_SWITCHES
import homeassistant.helpers.config_validation as cv
DEPENDENCIES = ['ihc']
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_SWITCHES, default=[]):
vol.All(cv.ensure_list, [
vol.All(
{
vol.Required(CONF_ID): cv.positive_int,
vol.Optional(CONF_NAME): cv.string,
}, validate_name)
])
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the ihc switch platform."""
ihc_controller = hass.data[IHC_DATA][IHC_CONTROLLER]
info = hass.data[IHC_DATA][IHC_INFO]
devices = []
if discovery_info:
for name, device in discovery_info.items():
ihc_id = device['ihc_id']
product = device['product']
from homeassistant.components.switch import (SwitchDevice, PLATFORM_SCHEMA)
from homeassistant.const import (CONF_HOST, CONF_NAME)
import homeassistant.helpers.config_validation as cv
REQUIREMENTS = ['pyHS100==0.2.4.2']
_LOGGER = logging.getLogger(__name__)
ATTR_CURRENT_CONSUMPTION = 'Current consumption'
ATTR_TOTAL_CONSUMPTION = 'Total consumption'
ATTR_DAILY_CONSUMPTION = 'Daily consumption'
ATTR_VOLTAGE = 'Voltage'
ATTR_CURRENT = 'Current'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST): cv.string,
vol.Optional(CONF_NAME): cv.string,
})
# pylint: disable=unused-argument
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the TPLink switch platform."""
from pyHS100 import SmartPlug
host = config.get(CONF_HOST)
name = config.get(CONF_NAME)
add_devices([SmartPlugSwitch(SmartPlug(host), name)], True)
class SmartPlugSwitch(SwitchDevice):
"""Representation of a TPLink Smart Plug switch."""
ATTR_HARDWARE_VERSION,
SCHEMA,
MAP,
DUMMY_IP,
DUMMY_TOKEN,
)
import copy
TYPE = 'switch'
_LOGGER = logging.getLogger(__name__)
DEFAULT_NAME = "Generic MIoT " + TYPE
DATA_KEY = TYPE + '.' + DOMAIN
SCAN_INTERVAL = timedelta(seconds=10)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(SCHEMA)
# pylint: disable=unused-argument
@asyncio.coroutine
async def async_setup_platform(hass,
config,
async_add_devices,
discovery_info=None):
hass.data[DOMAIN]['add_handler'].setdefault(TYPE, {})
if 'config_entry' in config:
id = config['config_entry'].entry_id
hass.data[DOMAIN]['add_handler'][TYPE].setdefault(
id, async_add_devices)
await async_generic_setup_platform(hass, config, async_add_devices,
_LOGGER = logging.getLogger(__name__)
CONF_FUNCTIONS = 'functions'
CONF_PINS = 'pins'
DEFAULT_NAME = 'aREST switch'
PIN_FUNCTION_SCHEMA = vol.Schema({
vol.Optional(CONF_NAME): cv.string,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_RESOURCE): cv.url,
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_PINS, default={}):
vol.Schema({cv.string: PIN_FUNCTION_SCHEMA}),
vol.Optional(CONF_FUNCTIONS, default={}):
vol.Schema({cv.string: PIN_FUNCTION_SCHEMA}),
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up the aREST switches."""
resource = config.get(CONF_RESOURCE)
try:
response = requests.get(resource, timeout=10)
except requests.exceptions.MissingSchema:
_LOGGER.error("Missing resource or schema in configuration. "
"Add http:// to your URL")
return False
MP1_SWITCH_SLOT_SCHEMA = vol.Schema({
vol.Optional('slot_1'): cv.string,
vol.Optional('slot_2'): cv.string,
vol.Optional('slot_3'): cv.string,
vol.Optional('slot_4'): cv.string
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_SWITCHES, default={}):
vol.Schema({cv.slug: SWITCH_SCHEMA}),
vol.Optional(CONF_SLOTS, default={}):
MP1_SWITCH_SLOT_SCHEMA,
vol.Required(CONF_HOST):
cv.string,
vol.Required(CONF_MAC):
cv.string,
vol.Optional(CONF_FRIENDLY_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_TYPE, default=SWITCH_TYPES[0]):
vol.In(SWITCH_TYPES),
vol.Optional(CONF_TIMEOUT, default=DEFAULT_TIMEOUT):
cv.positive_int
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
import aiohttp
from homeassistant.components.switch import (SwitchDevice, PLATFORM_SCHEMA)
from homeassistant.const import CONF_PASSWORD, CONF_USERNAME, CONF_TOKEN
from homeassistant.helpers.aiohttp_client import async_get_clientsession
import homeassistant.helpers.config_validation as cv
_LOGGER = logging.getLogger(__name__)
HOOK_ENDPOINT = 'https://api.gethook.io/v1/'
TIMEOUT = 10
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Exclusive(CONF_PASSWORD, 'hook_secret', msg='hook: provide ' +
'username/password OR token'): cv.string,
vol.Exclusive(CONF_TOKEN, 'hook_secret', msg='hook: provide ' +
'username/password OR token'): cv.string,
vol.Inclusive(CONF_USERNAME, 'hook_auth'): cv.string,
vol.Inclusive(CONF_PASSWORD, 'hook_auth'): cv.string,
})
async def async_setup_platform(hass, config, async_add_entities,
discovery_info=None):
"""Set up Hook by getting the access token and list of actions."""
username = config.get(CONF_USERNAME)
password = config.get(CONF_PASSWORD)
token = config.get(CONF_TOKEN)
websession = async_get_clientsession(hass)
# If password is set in config, prefer it over token
if username is not None and password is not None:
try:
DOMAIN = "switch"
DEFAULT_ICON_ENABLED = 'mdi:check-network-outline'
DEFAULT_ICON_DISABLED = 'mdi:close-network-outline'
REQUIREMENTS = ['pfsense-fauxapi==20190317.1']
_LOGGER = logging.getLogger(__name__)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST):
cv.string,
vol.Required(CONF_API_KEY):
cv.string,
vol.Required(CONF_ACCESS_TOKEN):
cv.string,
vol.Optional(CONF_FRIENDLY_NAME):
cv.string,
vol.Optional(CONF_VALUE_TEMPLATE):
cv.template,
vol.Optional(CONF_RULE_FILTER):
cv.string,
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Initialize the platform"""
"""Setup the pfSense Rules platform."""
import pprint, sys
from PfsenseFauxapi.PfsenseFauxapi import PfsenseFauxapi
# Assign configuration variables. The configuration check takes care they are
_LOGGER = logging.getLogger(__name__)
DEPENDENCIES = ['bbb_gpio']
CONF_PINS = 'pins'
CONF_INITIAL = 'initial'
CONF_INVERT_LOGIC = 'invert_logic'
PIN_SCHEMA = vol.Schema({
vol.Required(CONF_NAME): cv.string,
vol.Optional(CONF_INITIAL, default=False): cv.boolean,
vol.Optional(CONF_INVERT_LOGIC, default=False): cv.boolean,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_PINS, default={}):
vol.Schema({cv.string: PIN_SCHEMA}),
})
# pylint: disable=unused-argument
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up the BeagleBone Black GPIO devices."""
pins = config.get(CONF_PINS)
switches = []
for pin, params in pins.items():
switches.append(BBBGPIOSwitch(pin, params))
add_devices(switches)
class BBBGPIOSwitch(ToggleEntity):
DEFAULT_NAME = 'DINRelay'
DEFAULT_USERNAME = '******'
DEFAULT_PASSWORD = '******'
DEFAULT_TIMEOUT = 20
DEFAULT_CYCLETIME = 2
MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=5)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST):
cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_USERNAME, default=DEFAULT_USERNAME):
cv.string,
vol.Optional(CONF_PASSWORD, default=DEFAULT_PASSWORD):
cv.string,
vol.Optional(CONF_TIMEOUT, default=DEFAULT_TIMEOUT):
vol.All(vol.Coerce(int), vol.Range(min=1, max=600)),
vol.Optional(CONF_CYCLETIME, default=DEFAULT_CYCLETIME):
vol.All(vol.Coerce(int), vol.Range(min=1, max=600)),
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Find and return DIN III Relay switch."""
import dlipower
host = config.get(CONF_HOST)
controller_name = config.get(CONF_NAME)
user = config.get(CONF_USERNAME)
_LOGGER = logging.getLogger(__name__)
CONF_PINS = 'pins'
CONF_TYPE = 'digital'
CONF_NEGATE = 'negate'
CONF_INITIAL = 'initial'
PIN_SCHEMA = vol.Schema({
vol.Required(CONF_NAME): cv.string,
vol.Optional(CONF_INITIAL, default=False): cv.boolean,
vol.Optional(CONF_NEGATE, default=False): cv.boolean,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_PINS, default={}):
vol.Schema({cv.positive_int: PIN_SCHEMA}),
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Arduino platform."""
# Verify that Arduino board is present
if arduino.BOARD is None:
_LOGGER.error("A connection has not been made to the Arduino board")
return False
pins = config.get(CONF_PINS)
switches = []
for pinnum, pin in pins.items():
switches.append(ArduinoSwitch(pinnum, pin))
"""Support for interacting with UpCloud servers."""
import logging
import voluptuous as vol
from homeassistant.components.switch import PLATFORM_SCHEMA, SwitchDevice
from homeassistant.const import STATE_OFF
import homeassistant.helpers.config_validation as cv
from . import CONF_SERVERS, DATA_UPCLOUD, UpCloudServerEntity
_LOGGER = logging.getLogger(__name__)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{vol.Required(CONF_SERVERS): vol.All(cv.ensure_list, [cv.string])})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the UpCloud server switch."""
upcloud = hass.data[DATA_UPCLOUD]
servers = config.get(CONF_SERVERS)
devices = [UpCloudSwitch(upcloud, uuid) for uuid in servers]
add_entities(devices, True)
class UpCloudSwitch(UpCloudServerEntity, SwitchDevice):
"""Representation of an UpCloud server switch."""
def turn_on(self, **kwargs):
from homeassistant.const import (
CONF_FRIENDLY_NAME, CONF_SWITCHES, CONF_VALUE_TEMPLATE, CONF_COMMAND_OFF,
CONF_COMMAND_ON, CONF_COMMAND_STATE)
_LOGGER = logging.getLogger(__name__)
SWITCH_SCHEMA = vol.Schema({
vol.Optional(CONF_COMMAND_OFF, default='true'): cv.string,
vol.Optional(CONF_COMMAND_ON, default='true'): cv.string,
vol.Optional(CONF_COMMAND_STATE): cv.string,
vol.Optional(CONF_FRIENDLY_NAME): cv.string,
vol.Optional(CONF_VALUE_TEMPLATE): cv.template,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_SWITCHES): cv.schema_with_slug_keys(SWITCH_SCHEMA),
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Find and return switches controlled by shell commands."""
devices = config.get(CONF_SWITCHES, {})
switches = []
for object_id, device_config in devices.items():
value_template = device_config.get(CONF_VALUE_TEMPLATE)
if value_template is not None:
value_template.hass = hass
switches.append(
CONF_VERIFY_SSL,
)
import homeassistant.helpers.config_validation as cv
_LOGGER = logging.getLogger(__name__)
DEFAULT_SSL = True
DEFAULT_VERIFY_SSL = True
SWITCH_MODELS = ["Outlet", "Output 5v", "Output 12v", "Output 24v", "Dimmer Switch"]
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{
vol.Required(CONF_HOST): cv.string,
vol.Required(CONF_USERNAME): cv.string,
vol.Required(CONF_PASSWORD): cv.string,
vol.Optional(CONF_PORT): cv.port,
vol.Optional(CONF_SSL, default=DEFAULT_SSL): cv.boolean,
vol.Optional(CONF_VERIFY_SSL, default=DEFAULT_VERIFY_SSL): cv.boolean,
}
)
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up mFi sensors."""
host = config.get(CONF_HOST)
username = config.get(CONF_USERNAME)
password = config.get(CONF_PASSWORD)
use_tls = config.get(CONF_SSL)
verify_tls = config.get(CONF_VERIFY_SSL)
default_port = 6443 if use_tls else 6080
port = int(config.get(CONF_PORT, default_port))
REQUIREMENTS = ['https://github.com/mweinelt/anel-pwrctrl/archive/'
'ed26e8830e28a2bfa4260a9002db23ce3e7e63d7.zip'
'#anel_pwrctrl==0.0.1']
_LOGGER = logging.getLogger(__name__)
CONF_PORT_RECV = 'port_recv'
CONF_PORT_SEND = 'port_send'
MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=5)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_PORT_RECV): cv.port,
vol.Required(CONF_PORT_SEND): cv.port,
vol.Required(CONF_USERNAME): cv.string,
vol.Required(CONF_PASSWORD): cv.string,
vol.Optional(CONF_HOST): cv.string,
})
# pylint: disable=unused-variable
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up PwrCtrl devices/switches."""
host = config.get(CONF_HOST, None)
username = config.get(CONF_USERNAME)
password = config.get(CONF_PASSWORD)
port_recv = config.get(CONF_PORT_RECV)
port_send = config.get(CONF_PORT_SEND)
from anel_pwrctrl import DeviceMaster
from homeassistant.const import CONF_BROADCAST_ADDRESS, CONF_HOST, CONF_MAC, CONF_NAME
import homeassistant.helpers.config_validation as cv
from homeassistant.helpers.script import Script
_LOGGER = logging.getLogger(__name__)
CONF_OFF_ACTION = "turn_off"
DEFAULT_NAME = "Wake on LAN"
DEFAULT_PING_TIMEOUT = 1
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{
vol.Required(CONF_MAC): cv.string,
vol.Optional(CONF_BROADCAST_ADDRESS): cv.string,
vol.Optional(CONF_HOST): cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_OFF_ACTION): cv.SCRIPT_SCHEMA,
}
)
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up a wake on lan switch."""
broadcast_address = config.get(CONF_BROADCAST_ADDRESS)
host = config.get(CONF_HOST)
mac_address = config[CONF_MAC]
name = config[CONF_NAME]
off_action = config.get(CONF_OFF_ACTION)
add_entities(
DEFAULT_METHOD = 'post'
DEFAULT_BODY_OFF = 'OFF'
DEFAULT_BODY_ON = 'ON'
DEFAULT_NAME = 'REST Switch'
DEFAULT_TIMEOUT = 10
SUPPORT_REST_METHODS = ['post', 'put']
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_RESOURCE): cv.url,
vol.Optional(CONF_HEADERS): {cv.string: cv.string},
vol.Optional(CONF_BODY_OFF, default=DEFAULT_BODY_OFF): cv.template,
vol.Optional(CONF_BODY_ON, default=DEFAULT_BODY_ON): cv.template,
vol.Optional(CONF_IS_ON_TEMPLATE): cv.template,
vol.Optional(CONF_METHOD, default=DEFAULT_METHOD):
vol.All(vol.Lower, vol.In(SUPPORT_REST_METHODS)),
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_TIMEOUT, default=DEFAULT_TIMEOUT): cv.positive_int,
vol.Inclusive(CONF_USERNAME, 'authentication'): cv.string,
vol.Inclusive(CONF_PASSWORD, 'authentication'): cv.string,
})
async def async_setup_platform(hass, config, async_add_entities,
discovery_info=None):
"""Set up the RESTful switch."""
body_off = config.get(CONF_BODY_OFF)
body_on = config.get(CONF_BODY_ON)
is_on_template = config.get(CONF_IS_ON_TEMPLATE)
method = config.get(CONF_METHOD)
import homeassistant.helpers.config_validation as cv
from . import CONF_INVERT_LOGIC, DEFAULT_INVERT_LOGIC
from .. import remote_rpi_gpio
_LOGGER = logging.getLogger(__name__)
CONF_PORTS = "ports"
_SENSORS_SCHEMA = vol.Schema({cv.positive_int: cv.string})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST):
cv.string,
vol.Required(CONF_PORTS):
_SENSORS_SCHEMA,
vol.Optional(CONF_INVERT_LOGIC, default=DEFAULT_INVERT_LOGIC):
cv.boolean,
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Remote Raspberry PI GPIO devices."""
address = config[CONF_HOST]
invert_logic = config[CONF_INVERT_LOGIC]
ports = config[CONF_PORTS]
devices = []
for port, name in ports.items():
try:
led = remote_rpi_gpio.setup_output(address, port, invert_logic)
import homeassistant.helpers.config_validation as cv
from homeassistant.components.raincloud import (
ALLOWED_WATERING_TIME, CONF_ATTRIBUTION, CONF_WATERING_TIME,
DATA_RAINCLOUD, DEFAULT_WATERING_TIME, RainCloudEntity, SWITCHES)
from homeassistant.components.switch import SwitchDevice, PLATFORM_SCHEMA
from homeassistant.const import (
CONF_MONITORED_CONDITIONS, ATTR_ATTRIBUTION)
DEPENDENCIES = ['raincloud']
_LOGGER = logging.getLogger(__name__)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_MONITORED_CONDITIONS, default=list(SWITCHES)):
vol.All(cv.ensure_list, [vol.In(SWITCHES)]),
vol.Optional(CONF_WATERING_TIME, default=DEFAULT_WATERING_TIME):
vol.All(vol.In(ALLOWED_WATERING_TIME)),
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up a sensor for a raincloud device."""
raincloud = hass.data[DATA_RAINCLOUD].data
default_watering_timer = config.get(CONF_WATERING_TIME)
sensors = []
for sensor_type in config.get(CONF_MONITORED_CONDITIONS):
# create a sensor for each zone managed by faucet
for zone in raincloud.controller.faucet.zones:
sensors.append(
RainCloudSwitch(default_watering_timer,
PARALLEL_UPDATES = 0
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{
vol.Optional(
CONF_DEVICE_DEFAULTS, default=DEVICE_DEFAULTS_SCHEMA({})
): DEVICE_DEFAULTS_SCHEMA,
vol.Optional(CONF_DEVICES, default={}): {
cv.string: vol.Schema(
{
vol.Optional(CONF_NAME): cv.string,
vol.Optional(CONF_ALIASES, default=[]): vol.All(
cv.ensure_list, [cv.string]
),
vol.Optional(CONF_GROUP_ALIASES, default=[]): vol.All(
cv.ensure_list, [cv.string]
),
vol.Optional(CONF_NOGROUP_ALIASES, default=[]): vol.All(
cv.ensure_list, [cv.string]
),
vol.Optional(CONF_FIRE_EVENT): cv.boolean,
vol.Optional(CONF_SIGNAL_REPETITIONS): vol.Coerce(int),
vol.Optional(CONF_GROUP, default=True): cv.boolean,
}
)
},
},
extra=vol.ALLOW_EXTRA,
)
SWITCH_TYPES = {
'lights': 'Lights',
'filter': 'Filter',
'filter_low_speed': 'Filter Low Speed',
'aux_1': 'Aux 1',
'aux_2': 'Aux 2',
'aux_3': 'Aux 3',
'aux_4': 'Aux 4',
'aux_5': 'Aux 5',
'aux_6': 'Aux 6',
'aux_7': 'Aux 7',
}
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_MONITORED_CONDITIONS, default=list(SWITCH_TYPES)):
vol.All(cv.ensure_list, [vol.In(SWITCH_TYPES)]),
})
async def async_setup_platform(
hass, config, async_add_entities, discovery_info=None):
"""Set up the switch platform."""
switches = []
processor = hass.data[aq.DOMAIN]
for switch_type in config.get(CONF_MONITORED_CONDITIONS):
switches.append(AquaLogicSwitch(processor, switch_type))
async_add_entities(switches)
MP1_SWITCH_SLOT_SCHEMA = vol.Schema({
vol.Optional("slot_1"): cv.string,
vol.Optional("slot_2"): cv.string,
vol.Optional("slot_3"): cv.string,
vol.Optional("slot_4"): cv.string,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_SWITCHES, default={}):
cv.schema_with_slug_keys(SWITCH_SCHEMA),
vol.Optional(CONF_SLOTS, default={}):
MP1_SWITCH_SLOT_SCHEMA,
vol.Required(CONF_HOST):
vol.All(vol.Any(hostname, ip_address), cv.string),
vol.Required(CONF_MAC):
mac_address,
vol.Optional(CONF_FRIENDLY_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_TYPE, default=DEVICE_TYPES[0]):
vol.In(DEVICE_TYPES),
vol.Optional(CONF_TIMEOUT, default=DEFAULT_TIMEOUT):
cv.positive_int,
})
async def async_setup_platform(hass,
config,
async_add_entities,
discovery_info=None):
"""Set up the Broadlink switches."""
from homeassistant.components.switch import (SwitchDevice, PLATFORM_SCHEMA)
from homeassistant.const import (
ATTR_ENTITY_ID, ATTR_STATE, CONF_NAME, CONF_DEVICES)
import homeassistant.helpers.config_validation as cv
ATTR_SCENARIO_ID = 'scenario_id'
DEPENDENCIES = ['scsgate']
CONF_TRADITIONAL = 'traditional'
CONF_SCENARIO = 'scenario'
CONF_SCS_ID = 'scs_id'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_DEVICES):
cv.schema_with_slug_keys(scsgate.SCSGATE_SCHEMA),
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the SCSGate switches."""
logger = logging.getLogger(__name__)
_setup_traditional_switches(
logger=logger, config=config, add_entities_callback=add_entities)
_setup_scenario_switches(logger=logger, config=config, hass=hass)
def _setup_traditional_switches(logger, config, add_entities_callback):
"""Add traditional SCSGate switches."""
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_BASEOID):
cv.string,
vol.Optional(CONF_COMMAND_OID):
cv.string,
vol.Optional(CONF_COMMAND_PAYLOAD_ON):
cv.string,
vol.Optional(CONF_COMMAND_PAYLOAD_OFF):
cv.string,
vol.Optional(CONF_COMMUNITY, default=DEFAULT_COMMUNITY):
cv.string,
vol.Optional(CONF_HOST, default=DEFAULT_HOST):
cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_PAYLOAD_OFF, default=DEFAULT_PAYLOAD_OFF):
cv.string,
vol.Optional(CONF_PAYLOAD_ON, default=DEFAULT_PAYLOAD_ON):
cv.string,
vol.Optional(CONF_PORT, default=DEFAULT_PORT):
cv.port,
vol.Optional(CONF_VERSION, default=DEFAULT_VERSION):
vol.In(SNMP_VERSIONS),
vol.Optional(CONF_USERNAME):
cv.string,
vol.Optional(CONF_AUTH_KEY):
cv.string,
vol.Optional(CONF_AUTH_PROTOCOL, default=DEFAULT_AUTH_PROTOCOL):
vol.In(MAP_AUTH_PROTOCOLS),
vol.Optional(CONF_PRIV_KEY):
cv.string,
vol.Optional(CONF_PRIV_PROTOCOL, default=DEFAULT_PRIV_PROTOCOL):
vol.In(MAP_PRIV_PROTOCOLS),
vol.Optional(CONF_VARTYPE, default=DEFAULT_VARTYPE):
cv.string,
})
from homeassistant.components.knx import ATTR_DISCOVER_DEVICES, DATA_KNX
from homeassistant.components.switch import PLATFORM_SCHEMA, SwitchDevice
from homeassistant.const import CONF_NAME
from homeassistant.core import callback
import homeassistant.helpers.config_validation as cv
CONF_ADDRESS = 'address'
CONF_STATE_ADDRESS = 'state_address'
DEFAULT_NAME = 'KNX Switch'
DEPENDENCIES = ['knx']
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_ADDRESS): cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_STATE_ADDRESS): cv.string,
})
@asyncio.coroutine
def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
"""Set up switch(es) for KNX platform."""
if DATA_KNX not in hass.data or not hass.data[DATA_KNX].initialized:
return
if discovery_info is not None:
async_add_devices_discovery(hass, discovery_info, async_add_devices)
else:
async_add_devices_config(hass, config, async_add_devices)
DEFAULT_ID = '1'
SWITCH_SCHEMA = vol.Schema({
vol.Optional(CONF_ID, default=DEFAULT_ID): cv.string,
vol.Optional(CONF_FRIENDLY_NAME): cv.string,
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_NAME):
cv.string,
vol.Optional(CONF_ICON):
cv.icon,
vol.Required(CONF_HOST):
cv.string,
vol.Required(CONF_DEVICE_ID):
cv.string,
vol.Required(CONF_LOCAL_KEY):
cv.string,
vol.Optional(CONF_ID, default=DEFAULT_ID):
cv.string,
vol.Optional(CONF_SWITCHES, default={}):
vol.Schema({cv.slug: SWITCH_SCHEMA}),
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up of the Tuya switch."""
from . import pytuya
devices = config.get(CONF_SWITCHES)
switches = []
For more details about this platform, please refer to the documentation at
https://home-assistant.io/components/switch.vesync/
"""
import logging
import voluptuous as vol
from homeassistant.components.switch import (SwitchDevice, PLATFORM_SCHEMA)
from homeassistant.const import (CONF_USERNAME, CONF_PASSWORD)
import homeassistant.helpers.config_validation as cv
REQUIREMENTS = ['pyvesync_v2==0.9.6']
_LOGGER = logging.getLogger(__name__)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_USERNAME): cv.string,
vol.Required(CONF_PASSWORD): cv.string,
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the VeSync switch platform."""
from pyvesync_v2.vesync import VeSync
switches = []
manager = VeSync(config.get(CONF_USERNAME), config.get(CONF_PASSWORD))
if not manager.login():
_LOGGER.error("Unable to login to VeSync")
return
import homeassistant.helpers.config_validation as cv
from homeassistant.const import (CONF_HOST, CONF_NAME)
REQUIREMENTS = ['wakeonlan==0.2.2']
_LOGGER = logging.getLogger(__name__)
CONF_MAC_ADDRESS = 'mac_address'
DEFAULT_NAME = 'Wake on LAN'
DEFAULT_PING_TIMEOUT = 1
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_MAC_ADDRESS):
cv.string,
vol.Optional(CONF_HOST):
cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up a wake on lan switch."""
name = config.get(CONF_NAME)
host = config.get(CONF_HOST)
mac_address = config.get(CONF_MAC_ADDRESS)
add_devices([WOLSwitch(hass, name, host, mac_address)])
class WOLSwitch(SwitchDevice):
_LOGGER = logging.getLogger(__name__)
_VALID_STATES = [STATE_ON, STATE_OFF, 'true', 'false']
ON_ACTION = 'turn_on'
OFF_ACTION = 'turn_off'
SWITCH_SCHEMA = vol.Schema({
vol.Required(CONF_VALUE_TEMPLATE): cv.template,
vol.Required(ON_ACTION): cv.SCRIPT_SCHEMA,
vol.Required(OFF_ACTION): cv.SCRIPT_SCHEMA,
vol.Optional(ATTR_FRIENDLY_NAME): cv.string,
vol.Optional(ATTR_ENTITY_ID, default=MATCH_ALL): cv.entity_ids
})
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_SWITCHES): vol.Schema({cv.slug: SWITCH_SCHEMA}),
})
# pylint: disable=unused-argument
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the Template switch."""
switches = []
for device, device_config in config[CONF_SWITCHES].items():
friendly_name = device_config.get(ATTR_FRIENDLY_NAME, device)
state_template = device_config[CONF_VALUE_TEMPLATE]
on_action = device_config[ON_ACTION]
off_action = device_config[OFF_ACTION]
entity_ids = device_config[ATTR_ENTITY_ID]
SWITCH_SCHEMA = vol.All(
cv.deprecated(ATTR_ENTITY_ID),
vol.Schema({
vol.Optional(CONF_VALUE_TEMPLATE): cv.template,
vol.Optional(CONF_ICON_TEMPLATE): cv.template,
vol.Optional(CONF_ENTITY_PICTURE_TEMPLATE): cv.template,
vol.Optional(CONF_AVAILABILITY_TEMPLATE): cv.template,
vol.Required(ON_ACTION): cv.SCRIPT_SCHEMA,
vol.Required(OFF_ACTION): cv.SCRIPT_SCHEMA,
vol.Optional(ATTR_FRIENDLY_NAME): cv.string,
vol.Optional(ATTR_ENTITY_ID): cv.entity_ids,
vol.Optional(CONF_UNIQUE_ID): cv.string,
}),
)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{vol.Required(CONF_SWITCHES): cv.schema_with_slug_keys(SWITCH_SCHEMA)})
async def _async_create_entities(hass, config):
"""Create the Template switches."""
switches = []
for device, device_config in config[CONF_SWITCHES].items():
friendly_name = device_config.get(ATTR_FRIENDLY_NAME, device)
state_template = device_config.get(CONF_VALUE_TEMPLATE)
icon_template = device_config.get(CONF_ICON_TEMPLATE)
entity_picture_template = device_config.get(
CONF_ENTITY_PICTURE_TEMPLATE)
availability_template = device_config.get(CONF_AVAILABILITY_TEMPLATE)
on_action = device_config[ON_ACTION]
off_action = device_config[OFF_ACTION]
_LOGGER = logging.getLogger(__name__)
DEFAULT_SSL = True
DEFAULT_VERIFY_SSL = True
SWITCH_MODELS = [
'Outlet',
'Output 5v',
'Output 12v',
'Output 24v',
]
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST): cv.string,
vol.Required(CONF_USERNAME): cv.string,
vol.Required(CONF_PASSWORD): cv.string,
vol.Optional(CONF_PORT): cv.port,
vol.Optional(CONF_SSL, default=DEFAULT_SSL): cv.boolean,
vol.Optional(CONF_VERIFY_SSL, default=DEFAULT_VERIFY_SSL): cv.boolean,
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up mFi sensors."""
host = config.get(CONF_HOST)
username = config.get(CONF_USERNAME)
password = config.get(CONF_PASSWORD)
use_tls = config.get(CONF_SSL)
verify_tls = config.get(CONF_VERIFY_SSL)
default_port = 6443 if use_tls else 6080
port = int(config.get(CONF_PORT, default_port))
CONF_MODEL = 'model'
MODEL_K1 = ['smart plugin', 'k1']
MODEL_K2 = ['k2', 'k2 pro']
MODEL_MINIK = ['minik', 'minik pro']
MODEL_MUL = ['mul']
MODEL_MICMUL = ['micmul']
MODEL_SWITCH = MODEL_K1 + MODEL_K2 + MODEL_MINIK
MODEL_POWER_STRIP = MODEL_MUL + MODEL_MICMUL
UPDATE_DEBONCE = 0.3
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST):
cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_MODEL):
vol.In(MODEL_SWITCH + MODEL_POWER_STRIP)
})
async def async_setup_platform(hass,
config,
async_add_entities,
discovery_info=None):
from pykonkeio.manager import get_device
from pykonkeio.error import DeviceNotSupport
name = config[CONF_NAME]
host = config[CONF_HOST]
model = config[CONF_MODEL].lower()
entities = []
import logging
import voluptuous as vol
import homeassistant.helpers.config_validation as cv
from homeassistant.components.switch import (SwitchDevice, PLATFORM_SCHEMA, )
from homeassistant.const import (CONF_NAME, CONF_HOST, CONF_TOKEN, )
from homeassistant.exceptions import PlatformNotReady
_LOGGER = logging.getLogger(__name__)
DEFAULT_NAME = 'Xiaomi Miio Switch'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST): cv.string,
vol.Required(CONF_TOKEN): vol.All(cv.string, vol.Length(min=32, max=32)),
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
})
REQUIREMENTS = ['python-miio==0.3.1']
ATTR_POWER = 'power'
ATTR_TEMPERATURE = 'temperature'
ATTR_LOAD_POWER = 'load_power'
ATTR_MODEL = 'model'
SUCCESS = ['ok']
# pylint: disable=unused-argument
@asyncio.coroutine
def async_setup_platform(hass, config, async_add_devices, discovery_info=None):
DEFAULT_PROTO = "http"
DEFAULT_PORT = "5050"
DEFAULT_SORTING = "name"
CONF_SORTING = "sort"
PATTERN_DATE = '(\d){4}-(\d){2}-(\d){2}'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_TOKEN):
cv.string,
vol.Optional(CONF_PORT, default=DEFAULT_PORT):
cv.string,
vol.Optional(CONF_HOST, default=DEFAULT_HOST):
cv.string,
vol.Optional(CONF_PROTOCOL, default=DEFAULT_PROTO):
cv.string,
vol.Optional(CONF_MAXIMUM, default=DEFAULT_LIMIT):
cv.string,
vol.Optional(CONF_STATE, default=DEFAULT_STATE):
cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME):
cv.string,
vol.Optional(CONF_SORTING, default=DEFAULT_SORTING):
cv.string
})
def setup_platform(hass, config, add_entities, discovery_info=None):
add_entities([CouchPotatoSensor(config)])
class CouchPotatoSensor(Entity):
import homeassistant.helpers.config_validation as cv
REQUIREMENTS = ['pyHS100==0.3.2']
_LOGGER = logging.getLogger(__name__)
ATTR_TOTAL_ENERGY_KWH = 'total_energy_kwh'
ATTR_CURRENT_A = 'current_a'
CONF_LEDS = 'enable_leds'
DEFAULT_NAME = 'TP-Link Switch'
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_HOST): cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_LEDS): cv.boolean,
})
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up the TPLink switch platform."""
from pyHS100 import SmartPlug
host = config.get(CONF_HOST)
name = config.get(CONF_NAME)
leds_on = config.get(CONF_LEDS)
add_devices([SmartPlugSwitch(SmartPlug(host), name, leds_on)], True)
class SmartPlugSwitch(SwitchDevice):
_LOGGER = logging.getLogger(__name__)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Optional(CONF_DEVICE_DEFAULTS, default=DEVICE_DEFAULTS_SCHEMA({})):
DEVICE_DEFAULTS_SCHEMA,
vol.Optional(CONF_DEVICES, default={}): {
cv.string: vol.Schema({
vol.Optional(CONF_NAME): cv.string,
vol.Optional(CONF_ALIASES, default=[]):
vol.All(cv.ensure_list, [cv.string]),
vol.Optional(CONF_GROUP_ALIASES, default=[]):
vol.All(cv.ensure_list, [cv.string]),
vol.Optional(CONF_NOGROUP_ALIASES, default=[]):
vol.All(cv.ensure_list, [cv.string]),
vol.Optional(CONF_FIRE_EVENT): cv.boolean,
vol.Optional(CONF_SIGNAL_REPETITIONS): vol.Coerce(int),
vol.Optional(CONF_GROUP, default=True): cv.boolean,
# deprecated config options
vol.Optional(CONF_ALIASSES):
vol.All(cv.ensure_list, [cv.string]),
vol.Optional(CONF_GROUP_ALIASSES):
vol.All(cv.ensure_list, [cv.string]),
vol.Optional(CONF_NOGROUP_ALIASSES):
vol.All(cv.ensure_list, [cv.string]),
})
},
}, extra=vol.ALLOW_EXTRA)
def devices_from_config(domain_config):
_LOGGER = logging.getLogger(__name__)
CONF_SERVER = "server"
DEFAULT_HOST = "localhost"
DEFAULT_NAME = "Plex"
DEFAULT_PORT = 32400
MIN_TIME_BETWEEN_UPDATES = timedelta(minutes=1)
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend(
{
vol.Optional(CONF_HOST, default=DEFAULT_HOST): cv.string,
vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
vol.Optional(CONF_PASSWORD): cv.string,
vol.Optional(CONF_PORT, default=DEFAULT_PORT): cv.port,
vol.Optional(CONF_SERVER): cv.string,
vol.Optional(CONF_USERNAME): cv.string,
}
)
# pylint: disable=unused-argument
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the Plex sensor."""
name = config.get(CONF_NAME)
plex_user = config.get(CONF_USERNAME)
plex_password = config.get(CONF_PASSWORD)
plex_server = config.get(CONF_SERVER)
plex_host = config.get(CONF_HOST)
plex_port = config.get(CONF_PORT)
ARM_HUMIDITY = "humidity"
ARM_MOTION = "motion"
ARM_LIGHT = "light"
ARM_MOISTURE = "moisture"
# Switch types: Name, tag sensor type
SWITCH_TYPES = {
ARM_TEMPERATURE: ["Arm Temperature", "temperature"],
ARM_HUMIDITY: ["Arm Humidity", "humidity"],
ARM_MOTION: ["Arm Motion", "motion"],
ARM_LIGHT: ["Arm Light", "light"],
ARM_MOISTURE: ["Arm Moisture", "moisture"],
}
PLATFORM_SCHEMA = PLATFORM_SCHEMA.extend({
vol.Required(CONF_MONITORED_CONDITIONS, default=[]):
vol.All(cv.ensure_list, [vol.In(SWITCH_TYPES)])
})
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up switches for a Wireless Sensor Tags."""
platform = hass.data.get(WIRELESSTAG_DOMAIN)
switches = []
tags = platform.load_tags()
for switch_type in config.get(CONF_MONITORED_CONDITIONS):
for _, tag in tags.items():
if switch_type in tag.allowed_monitoring_types:
switches.append(WirelessTagSwitch(platform, tag, switch_type))
add_entities(switches, True)
