def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the Z-Wave platform for binary sensors."""
if discovery_info is None or zwave.NETWORK is None:
return
node = zwave.NETWORK.nodes[discovery_info[zwave.const.ATTR_NODE_ID]]
value = node.values[discovery_info[zwave.const.ATTR_VALUE_ID]]
value.set_change_verified(False)
# Make sure that we have values for the key before converting to int
if (value.node.manufacturer_id.strip() and value.node.product_id.strip()):
specific_sensor_key = (int(value.node.manufacturer_id,
16), int(value.node.product_id,
16), value.index)
if specific_sensor_key in DEVICE_MAPPINGS:
if DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = (zwave.get_config_value(value.node, 9)
or 4)
add_devices([
ZWaveTriggerSensor(value, "motion", hass,
re_arm_multiplier * 8)
])
return
if value.command_class == zwave.const.COMMAND_CLASS_SENSOR_BINARY:
add_devices([ZWaveBinarySensor(value, None)])
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the Z-Wave platform for binary sensors."""
if discovery_info is None or zwave.NETWORK is None:
return
node = zwave.NETWORK.nodes[discovery_info[zwave.const.ATTR_NODE_ID]]
value = node.values[discovery_info[zwave.const.ATTR_VALUE_ID]]
value.set_change_verified(False)
device_mapping = workaround.get_device_mapping(value)
if device_mapping == workaround.WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = (zwave.get_config_value(value.node, 9) or 4)
add_devices([
ZWaveTriggerSensor(value, "motion",
hass, re_arm_multiplier * 8)
])
return
if workaround.get_device_component_mapping(value) == DOMAIN:
add_devices([ZWaveBinarySensor(value, None)])
return
if value.command_class == zwave.const.COMMAND_CLASS_SENSOR_BINARY:
add_devices([ZWaveBinarySensor(value, None)])
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the Z-Wave platform for binary sensors."""
if discovery_info is None or zwave.NETWORK is None:
return
node = zwave.NETWORK.nodes[discovery_info[zwave.const.ATTR_NODE_ID]]
value = node.values[discovery_info[zwave.const.ATTR_VALUE_ID]]
value.set_change_verified(False)
# Make sure that we have values for the key before converting to int
if (value.node.manufacturer_id.strip() and
value.node.product_id.strip()):
specific_sensor_key = (int(value.node.manufacturer_id, 16),
int(value.node.product_id, 16),
value.index)
if specific_sensor_key in DEVICE_MAPPINGS:
if DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = (zwave.get_config_value(value.node,
9) or 4)
add_devices([
ZWaveTriggerSensor(value, "motion",
hass, re_arm_multiplier * 8)
])
return
if value.command_class == zwave.const.COMMAND_CLASS_SENSOR_BINARY:
add_devices([ZWaveBinarySensor(value, None)])
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the Z-Wave platform for binary sensors."""
if discovery_info is None or zwave.NETWORK is None:
return
node = zwave.NETWORK.nodes[discovery_info[zwave.const.ATTR_NODE_ID]]
value = node.values[discovery_info[zwave.const.ATTR_VALUE_ID]]
value.set_change_verified(False)
device_mapping = workaround.get_device_mapping(value)
if device_mapping == workaround.WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = (zwave.get_config_value(value.node, 9) or 4)
add_devices([
ZWaveTriggerSensor(value, "motion",
hass, re_arm_multiplier * 8)
])
return
if workaround.get_device_component_mapping(value) == DOMAIN:
add_devices([ZWaveBinarySensor(value, None)])
return
if value.command_class == zwave.const.COMMAND_CLASS_SENSOR_BINARY:
add_devices([ZWaveBinarySensor(value, None)])
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the Z-Wave platform for sensors."""
if discovery_info is None or NETWORK is None:
return
node = NETWORK.nodes[discovery_info[ATTR_NODE_ID]]
value = node.values[discovery_info[ATTR_VALUE_ID]]
specific_sensor_key = (int(value.node.manufacturer_id, 16),
int(value.node.product_id, 16),
value.index)
value.set_change_verified(False)
if specific_sensor_key in DEVICE_MAPPINGS:
if DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = (get_config_value(value.node, 9) or 4)
add_devices([
ZWaveTriggerSensor(value, "motion",
hass, re_arm_multiplier * 8)
])
elif value.command_class == COMMAND_CLASS_SENSOR_BINARY:
add_devices([ZWaveBinarySensor(value, None)])
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup the Z-Wave platform for sensors."""
if discovery_info is None or NETWORK is None:
return
node = NETWORK.nodes[discovery_info[ATTR_NODE_ID]]
value = node.values[discovery_info[ATTR_VALUE_ID]]
specific_sensor_key = (int(value.node.manufacturer_id,
16), int(value.node.product_id,
16), value.index)
value.set_change_verified(False)
if specific_sensor_key in DEVICE_MAPPINGS:
if DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = (get_config_value(value.node, 9) or 4)
add_devices([
ZWaveTriggerSensor(value, "motion", hass,
re_arm_multiplier * 8)
])
elif value.command_class == COMMAND_CLASS_SENSOR_BINARY:
add_devices([ZWaveBinarySensor(value, None)])
def test_config_access_error():
"""Test threading error accessing config values."""
node = MagicMock()
def side_effect():
raise RuntimeError
node.values.values.side_effect = side_effect
result = zwave.get_config_value(node, 1)
assert result is None
def test_config_access_error():
"""Test threading error accessing config values."""
node = MagicMock()
def side_effect():
raise RuntimeError
node.values.values.side_effect = side_effect
result = zwave.get_config_value(node, 1)
assert result is None
def get_device(values, **kwargs):
"""Create zwave entity device."""
device_mapping = workaround.get_device_mapping(values.primary)
if device_mapping == workaround.WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = zwave.get_config_value(values.primary.node, 9) or 4
return ZWaveTriggerSensor(values, "motion", re_arm_multiplier * 8)
if workaround.get_device_component_mapping(values.primary) == DOMAIN:
return ZWaveBinarySensor(values, None)
if values.primary.command_class == zwave.const.COMMAND_CLASS_SENSOR_BINARY:
return ZWaveBinarySensor(values, None)
return None
def get_device(values, **kwargs):
"""Create zwave entity device."""
device_mapping = workaround.get_device_mapping(values.primary)
if device_mapping == workaround.WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = zwave.get_config_value(values.primary.node, 9) or 4
return ZWaveTriggerSensor(values, "motion", re_arm_multiplier * 8)
if workaround.get_device_component_mapping(values.primary) == DOMAIN:
return ZWaveBinarySensor(values, None)
if values.primary.command_class == zwave.const.COMMAND_CLASS_SENSOR_BINARY:
return ZWaveBinarySensor(values, None)
return None
def setup_platform(hass, config, add_devices, discovery_info=None):
""" Sets up Z-Wave sensors. """
# Return on empty `discovery_info`. Given you configure HA with:
#
# sensor:
# platform: zwave
#
# `setup_platform` will be called without `discovery_info`.
if discovery_info is None:
return
node = NETWORK.nodes[discovery_info[ATTR_NODE_ID]]
value = node.values[discovery_info[ATTR_VALUE_ID]]
value.set_change_verified(False)
# if 1 in groups and (NETWORK.controller.node_id not in
# groups[1].associations):
# node.groups[1].add_association(NETWORK.controller.node_id)
specific_sensor_key = (value.node.manufacturer_id,
value.node.product_id,
value.index)
# Check workaround mappings for specific devices
if specific_sensor_key in DEVICE_MAPPINGS:
if DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = (get_config_value(value.node, 9) or 4)
add_devices([
ZWaveTriggerSensor(value, hass, re_arm_multiplier * 8)
])
elif DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_IGNORE:
return
# generic Device mappings
elif value.command_class == COMMAND_CLASS_SENSOR_BINARY:
add_devices([ZWaveBinarySensor(value)])
elif value.command_class == COMMAND_CLASS_SENSOR_MULTILEVEL:
add_devices([ZWaveMultilevelSensor(value)])
elif (value.command_class == COMMAND_CLASS_METER and
value.type == TYPE_DECIMAL):
add_devices([ZWaveMultilevelSensor(value)])
elif value.command_class == COMMAND_CLASS_ALARM:
add_devices([ZWaveAlarmSensor(value)])
def setup_platform(hass, config, add_devices, discovery_info=None):
""" Sets up Z-Wave sensors. """
# Return on empty `discovery_info`. Given you configure HA with:
#
# sensor:
# platform: zwave
#
# `setup_platform` will be called without `discovery_info`.
if discovery_info is None:
return
node = NETWORK.nodes[discovery_info[ATTR_NODE_ID]]
value = node.values[discovery_info[ATTR_VALUE_ID]]
value.set_change_verified(False)
# if 1 in groups and (NETWORK.controller.node_id not in
# groups[1].associations):
# node.groups[1].add_association(NETWORK.controller.node_id)
specific_sensor_key = (value.node.manufacturer_id, value.node.product_id,
value.index)
# Check workaround mappings for specific devices
if specific_sensor_key in DEVICE_MAPPINGS:
if DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_NO_OFF_EVENT:
# Default the multiplier to 4
re_arm_multiplier = (get_config_value(value.node, 9) or 4)
add_devices(
[ZWaveTriggerSensor(value, hass, re_arm_multiplier * 8)])
elif DEVICE_MAPPINGS[specific_sensor_key] == WORKAROUND_IGNORE:
return
# generic Device mappings
elif value.command_class == COMMAND_CLASS_SENSOR_BINARY:
add_devices([ZWaveBinarySensor(value)])
elif value.command_class == COMMAND_CLASS_SENSOR_MULTILEVEL:
add_devices([ZWaveMultilevelSensor(value)])
elif (value.command_class == COMMAND_CLASS_METER
and value.type == TYPE_DECIMAL):
add_devices([ZWaveMultilevelSensor(value)])
elif value.command_class == COMMAND_CLASS_ALARM:
add_devices([ZWaveAlarmSensor(value)])