def _do_close(self):
"""Close the connection with the Modbus Slave"""
if self._sock:
call_hooks("modbus_tcp.TcpMaster.before_close", (self, ))
self._sock.close()
call_hooks("modbus_tcp.TcpMaster.after_close", (self, ))
self._sock = None
def handle_request(self, query, request):
"""
when a request is received, handle it and returns the response pdu
"""
request_pdu = ""
try:
#extract the pdu and the slave id
(slave_id, request_pdu) = query.parse_request(request)
#get the slave and let him executes the action
if slave_id == 0:
#broadcast
for key in self._slaves:
self._slaves[key].handle_request(request_pdu,
broadcast=True)
return
else:
slave = self.get_slave(slave_id)
response_pdu = slave.handle_request(request_pdu)
#make the full response
response = query.build_response(response_pdu)
return response
except Exception, excpt:
call_hooks("modbus.Databank.on_error", (self, excpt, request_pdu))
LOGGER.error("handle request failed: " + str(excpt))
def _write_multiple_registers(self, request_pdu):
"""execute modbus function 16"""
call_hooks("modbus.Slave.handle_write_multiple_registers_request",
(self, request_pdu))
# get the starting address and the number of items from the request pdu
(starting_address, quantity_of_x,
byte_count) = struct.unpack(">HHB", request_pdu[1:6])
if (quantity_of_x <= 0) or (quantity_of_x >
123) or (byte_count !=
(quantity_of_x * 2)):
# maximum allowed size is 123 registers in one reading
raise ModbusError(defines.ILLEGAL_DATA_VALUE)
# look for the block corresponding to the request
block, offset = self._get_block_and_offset(defines.HOLDING_REGISTERS,
starting_address,
quantity_of_x)
count = 0
for i in xrange(quantity_of_x):
count += 1
fmt = "H" if self.unsigned else "h"
block[offset + i] = struct.unpack(
">" + fmt, request_pdu[6 + 2 * i:8 + 2 * i])[0]
return struct.pack(">HH", starting_address, count)
def _write_multiple_coils(self, request_pdu):
"""execute modbus function 15"""
call_hooks("modbus.Slave.handle_write_multiple_coils_request", (self, request_pdu))
# get the starting address and the number of items from the request pdu
(starting_address, quantity_of_x, byte_count) = struct.unpack(">HHB", request_pdu[1:6])
expected_byte_count = quantity_of_x / 8
if (quantity_of_x % 8) > 0:
expected_byte_count += 1
if (quantity_of_x <= 0) or (quantity_of_x > 1968) or (byte_count != expected_byte_count):
# maximum allowed size is 1968 coils
raise ModbusError(defines.ILLEGAL_DATA_VALUE)
# look for the block corresponding to the request
block, offset = self._get_block_and_offset(defines.COILS, starting_address, quantity_of_x)
count = 0
for i in xrange(byte_count):
if count >= quantity_of_x:
break
(byte_value, ) = struct.unpack(">B", request_pdu[6+i])
for j in xrange(8):
if byte_value & (1 << j):
block[offset+i*8+j] = 1
else:
block[offset+i*8+j] = 0
if count >= quantity_of_x:
break
count += 1
return struct.pack(">HH", starting_address, count)
def _write_multiple_coils(self, request_pdu):
"""execute modbus function 15"""
call_hooks("modbus.Slave.handle_write_multiple_coils_request", (self, request_pdu))
# get the starting address and the number of items from the request pdu
(starting_address, quantity_of_x, byte_count) = struct.unpack(">HHB", request_pdu[1:6])
expected_byte_count = quantity_of_x / 8
if (quantity_of_x % 8) > 0:
expected_byte_count += 1
if (quantity_of_x <= 0) or (quantity_of_x > 1968) or (byte_count != expected_byte_count):
# maximum allowed size is 1968 coils
raise ModbusError(defines.ILLEGAL_DATA_VALUE)
# look for the block corresponding to the request
block, offset = self._get_block_and_offset(defines.COILS, starting_address, quantity_of_x)
count = 0
for i in xrange(byte_count):
if count >= quantity_of_x:
break
fmt = "B" if self.unsigned else "b"
(byte_value, ) = struct.unpack(">"+fmt, request_pdu[6+i])
for j in xrange(8):
if byte_value & (1 << j):
block[offset+i*8+j] = 1
else:
block[offset+i*8+j] = 0
if count >= quantity_of_x:
break
count += 1
return struct.pack(">HH", starting_address, count)
def _do_close(self):
"""Close the connection with the Modbus Slave"""
if self._sock:
call_hooks("modbus_tcp.TcpMaster.before_close", (self, ))
self._sock.close()
call_hooks("modbus_tcp.TcpMaster.after_close", (self, ))
self._sock = None
def _do_run(self):
"""main function of the server"""
try:
#check the status of every socket
response = ""
request = ""
read_bytes = "dummy"
while read_bytes:
read_bytes = self._serial.read(128)
request += read_bytes
#parse the request
if request:
retval = call_hooks("modbus_rtu.RtuServer.after_read", (self, request))
if retval <> None:
request = retval
response = self._handle(request)
#send back the response
retval = call_hooks("modbus_rtu.RtuServer.before_write", (self, response))
if retval <> None:
response = retval
if response:
self._serial.write(response)
time.sleep(3.5 * self._t0)
except Exception, excpt:
LOGGER.error("Error while handling request, Exception occurred: %s", excpt)
call_hooks("modbus_rtu.RtuServer.on_error", (self, excpt))
def __setitem__(self, r, v):
""""""
call_hooks("modbus.ModbusBlock.setitem", (self, r, v))
##We get a copy of the existing values that are about to change,
## implement the changes according to type, then put the new objects
## into the _data object
item = self._data.__getitem__(r)
try:
for cnt in range(len(item)):
if str(type(item[cnt])) == "<class 'point.Point'>":
item[cnt] = item[cnt].set(v[cnt])
else:
item[cnt] = v[cnt]
return self._data.__setitem__(r, item)
except TypeError: #This happens if item isn't iterable:
if str(type(item)) == "<class 'point.Point'>":
item = item.set(v)
else:
#print "BRDEBUG: In __setitem__. About to do the default", type(item)
return self._data.__setitem__(r, v)
finally:
if hasattr(v,'__iter__') and (self.__getitem__(r) == list(v)):
pass
elif ((str(type(v)) == "<class 'point.Point'>") and
self.__getitem__(r) == v.get() ):
pass
elif self.__getitem__(r) != v:
raise Exception("Stored value %s not equal to %s" %
(self.__getitem__(r), v) )
def _write_single_register(self, request_pdu):
"""execute modbus function 6"""
call_hooks("modbus.Slave.handle_write_single_register_request", (self, request_pdu))
(data_address, value) = struct.unpack(">HH", request_pdu[1:5])
block, offset = self._get_block_and_offset(defines.HOLDING_REGISTERS, data_address, 1)
block[offset] = value
return request_pdu[1:] #returns echo of the command
def __getitem__(self, r):
""""""
call_hooks(
"modbus.ModbusBlock.getitem",
(self, r, self.block_name)) # Added by zhen.zhang on 2012-08-15
# 注：参数r可能是slice类型或int类型
return self._data.__getitem__(r)
def _write_single_register(self, request_pdu):
"""execute modbus function 6"""
call_hooks("modbus.Slave.handle_write_single_register_request", (self, request_pdu))
fmt = "H" if self.unsigned else "h"
(data_address, value) = struct.unpack(">H"+fmt, request_pdu[1:5])
block, offset = self._get_block_and_offset(defines.HOLDING_REGISTERS, data_address, 1)
block[offset] = value
return request_pdu[1:] #returns echo of the command
def _do_open(self):
"""Connect to the Modbus slave"""
if self._sock:
self._sock.close()
self._sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
self.set_timeout(self.get_timeout())
call_hooks("modbus_tcp.TcpMaster.before_connect", (self, ))
self._sock.connect((self._host, self._port))
call_hooks("modbus_tcp.TcpMaster.after_connect", (self, ))
def __setitem__(self, r, v):
""""""
#call_hooks("modbus.ModbusBlock.setitem", (self, r, v)) # Commented by zhen.zhang on 2012-08-14
call_hooks(
"modbus.ModbusBlock.setitem",
(self, r, v, self.block_name)) # Added by zhen.zhang on 2012-08-14
# 注：参数r可能是slice类型（此时v是list类型）或int类型（此时v是int类型）
return self._data.__setitem__(r, v)
def _do_open(self):
"""Connect to the Modbus slave"""
if self._sock:
self._sock.close()
self._sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
self.set_timeout(self.get_timeout())
call_hooks("modbus_tcp.TcpMaster.before_connect", (self, ))
self._sock.connect((self._host, self._port))
call_hooks("modbus_tcp.TcpMaster.after_connect", (self, ))
def _write_single_coil(self, request_pdu):
"""execute modbus function 5"""
call_hooks("modbus.Slave.handle_write_single_coil_request", (self, request_pdu))
(data_address, value) = struct.unpack(">HH", request_pdu[1:5])
block, offset = self._get_block_and_offset(defines.COILS, data_address, 1)
if value == 0:
block[offset] = 0
elif value == 0xff00:
block[offset] = 1
else:
raise ModbusError(defines.ILLEGAL_DATA_VALUE)
return request_pdu[1:] #returns echo of the command
def _write_single_coil(self, request_pdu):
"""execute modbus function 5"""
fmt = "H" if self.unsigned else "h"
call_hooks("modbus.Slave.handle_write_single_coil_request", (self, request_pdu))
(data_address, value) = struct.unpack(">H"+fmt, request_pdu[1:5])
block, offset = self._get_block_and_offset(defines.COILS, data_address, 1)
if value == 0:
block[offset] = 0
elif value == 0xff00:
block[offset] = 1
else:
raise ModbusError(defines.ILLEGAL_DATA_VALUE)
return request_pdu[1:] #returns echo of the command
def handle_request(self, request_pdu, broadcast=False):
"""
parse the request pdu, makes the corresponding action
and returns the response pdu
"""
with self._data_lock: #thread-safe
try:
retval = call_hooks("modbus.Slave.handle_request",
(self, request_pdu))
if retval <> None:
return retval
# get the function code
(function_code, ) = struct.unpack(">B", request_pdu[0])
# check if the function code is valid. If not returns error response
if not self._fn_code_map.has_key(function_code):
raise ModbusError(defines.ILLEGAL_FUNCTION)
# if read query is broadcasted raises an error
cant_be_broadcasted = (defines.READ_COILS,
defines.READ_DISCRETE_INPUTS,
defines.READ_INPUT_REGISTERS,
defines.READ_HOLDING_REGISTERS)
if broadcast and (function_code in cant_be_broadcasted):
raise ModbusInvalidRequestError(
"Function %d can not be broadcasted" % function_code)
#execute the corresponding function
response_pdu = self._fn_code_map[function_code](request_pdu)
if response_pdu:
if broadcast:
call_hooks("modbus.Slave.on_handle_broadcast",
(self, response_pdu))
LOGGER.debug(
"broadcast: %s" %
(utils.get_log_buffer("!!", response_pdu)))
return ""
else:
return struct.pack(">B", function_code) + response_pdu
raise Exception("No response for function %d" % function_code)
except ModbusError, excpt:
LOGGER.debug(str(excpt))
call_hooks("modbus.Slave.on_exception",
(self, function_code, excpt))
return struct.pack(">BB", function_code + 128,
excpt.get_exception_code())
def _recv(self, expected_length=-1):
"""Receive the response from the slave"""
response = ""
read_bytes = "dummy"
while read_bytes:
read_bytes = self._serial.read(1)
#print repr(read_bytes),1111
response += read_bytes
if expected_length >= 0 and len(
response) >= 2 * expected_length + 1:
#if the expected number of byte is received consider that the response is done
#improve performance by avoiding end-of-response detection by timeout
break
#response='3A 30 31 30 33 30 34 34 30 38 30 30 30 30 30 33 38 0D 0A'
# response=':0103084080000038'
retval = call_hooks("modbus_rtu.RtuMaster.after_recv",
(self, response))
if retval <> None:
return retval
print response[1:-2], 1111
return binascii.a2b_hex(response[1:-2])
def _recv(self, expected_length=-1):
"""
Receive the response from the slave
Do not take expected_length into account because the length of the response is
written in the mbap. Used for RTU only
"""
response = ""
length = 255
while len(response)<length:
rcv_byte = self._sock.recv(1)
if rcv_byte:
response += rcv_byte
if len(response) == 6:
(tr_id, pr_id, to_be_recv_length) = struct.unpack(">HHH", response)
length = to_be_recv_length + 6
else:
break
retval = call_hooks("modbus_tcp.TcpMaster.after_recv", (self, response))
if retval <> None:
return response
return response
def _write_multiple_registers(self, request_pdu):
"""execute modbus function 16"""
call_hooks("modbus.Slave.handle_write_multiple_registers_request", (self, request_pdu))
# get the starting address and the number of items from the request pdu
(starting_address, quantity_of_x, byte_count) = struct.unpack(">HHB", request_pdu[1:6])
if (quantity_of_x <= 0) or (quantity_of_x > 123) or (byte_count != (quantity_of_x * 2)):
# maximum allowed size is 123 registers in one reading
raise ModbusError(defines.ILLEGAL_DATA_VALUE)
# look for the block corresponding to the request
block, offset = self._get_block_and_offset(defines.HOLDING_REGISTERS, starting_address, quantity_of_x)
count = 0
for i in xrange(quantity_of_x):
count += 1
block[offset+i] = struct.unpack(">H", request_pdu[6+2*i:8+2*i])[0]
return struct.pack(">HH", starting_address, count)
def handle_request(self, request_pdu, broadcast=False):
"""
parse the request pdu, makes the corresponding action
and returns the response pdu
"""
with self._data_lock: # thread-safe
try:
retval = call_hooks("modbus.Slave.handle_request", (self, request_pdu))
if retval <> None:
return retval
# get the function code
(function_code,) = struct.unpack(">B", request_pdu[0])
# check if the function code is valid. If not returns error response
if not self._fn_code_map.has_key(function_code):
raise ModbusError(defines.ILLEGAL_FUNCTION)
# if read query is broadcasted raises an error
cant_be_broadcasted = (
defines.READ_COILS,
defines.READ_DISCRETE_INPUTS,
defines.READ_INPUT_REGISTERS,
defines.READ_HOLDING_REGISTERS,
)
if broadcast and (function_code in cant_be_broadcasted):
raise ModbusInvalidRequestError("Function %d can not be broadcasted" % function_code)
# execute the corresponding function
response_pdu = self._fn_code_map[function_code](request_pdu)
if response_pdu:
if broadcast:
call_hooks("modbus.Slave.on_handle_broadcast", (self, response_pdu))
LOGGER.debug("broadcast: %s" % (utils.get_log_buffer("!!", response_pdu)))
return ""
else:
return struct.pack(">B", function_code) + response_pdu
raise Exception("No response for function %d" % function_code)
except ModbusError, excpt:
LOGGER.debug(str(excpt))
call_hooks("modbus.Slave.on_exception", (self, function_code, excpt))
return struct.pack(">BB", function_code + 128, excpt.get_exception_code())
def _send(self, request):
"""Send request to the slave"""
retval = call_hooks("modbus_rtu.RtuMaster.before_send", (self, request))
if retval <> None:
request = retval
self._serial.flushInput()
self._serial.flushOutput()
self._serial.write(request)
time.sleep(3.5 * self._t0)
def _send(self, request):
"""Send request to the slave"""
retval = call_hooks("modbus_rtu.RtuMaster.before_send", (self, request))
if retval <> None:
request = retval
self._serial.flushInput()
self._serial.flushOutput()
self._serial.write(request)
time.sleep(3.5 * self._t0)
def _send(self, request):
"""Send request to the slave"""
retval = call_hooks("modbus_tcp.TcpMaster.before_send", (self, request))
if retval <> None:
request = retval
try:
utils.flush_socket(self._sock, 3)
except Exception, msg:
#if we can't flush the socket successfully: a disconnection may happened
#try to reconnect
LOGGER.error('Error while flushing the socket: {0}'.format(msg))
raise ModbusNotConnectedError(msg)
def _handle(self, request):
"""handle a received sentence"""
if self._verbose:
LOGGER.debug(utils.get_log_buffer("-->", request))
#gets a query for analyzing the request
query = self._make_query()
retval = call_hooks("modbus.Server.before_handle_request", (self, request))
if retval:
request = retval
response = self._databank.handle_request(query, request)
retval = call_hooks("modbus.Server.after_handle_request", (self, response))
if retval:
response = retval
if response and self._verbose:
LOGGER.debug(utils.get_log_buffer("<--", response))
return response
def _handle(self, request):
"""handle a received sentence"""
if self._verbose:
LOGGER.debug(utils.get_log_buffer("-->", request))
#gets a query for analyzing the request
query = self._make_query()
retval = call_hooks("modbus.Server.before_handle_request", (self, request))
if retval:
request = retval
response = self._databank.handle_request(query, request)
retval = call_hooks("modbus.Server.after_handle_request", (self, response))
if retval:
response = retval
if response and self._verbose:
LOGGER.debug(utils.get_log_buffer("<--", response))
return response
def _send(self, request):
"""Send request to the slave"""
retval = call_hooks("modbus_rtu_over_tcp.RtuOverTcpMaster.before_send", (self, request))
if retval <> None:
request = retval
try:
utils.flush_socket(self._sock, 3)
except Exception, msg:
#if we can't flush the socket successfully: a disconnection may happened
#try to reconnect
LOGGER.error('Error while flushing the socket: {0}'.format(msg))
#raise ModbusNotConnectedError(msg)
self._do_open();
def _do_run(self):
"""main function of the server"""
try:
#check the status of every socket
response = ""
request = ""
read_bytes = "dummy"
while read_bytes:
read_bytes = self._serial.read(128)
request += read_bytes
#rxtime = time.time()#BRDEBUG
#parse the request
if request:
retval = call_hooks("modbus_rtu.RtuServer.after_read", (self, request))
if retval <> None:
request = retval
response = self._handle(request)
#send back the response
retval = call_hooks("modbus_rtu.RtuServer.before_write", (self, response))
if retval <> None:
response = retval
if response:
self._serial.write(response)
#txtime = time.time() #BRDEBUG
time.sleep(3.5 * self._t0)
#BRDEBUG
#self.avg = getattr(self, 'avg', 0)
#self.n = getattr(self, 'n', 0)
#self.avg = ((self.avg*self.n + (txtime - rxtime))/(self.n+1))
#self.n = self.n+1
#print "BRDEBUG Received request: %.6f"% rxtime
#print "BRDEBUG response sent: %.6f"% txtime
#print "BRDEBUG Rolling average: %.6f"% self.avg
except Exception, excpt:
LOGGER.error("Error while handling request, Exception occurred: %s", excpt)
call_hooks("modbus_rtu.RtuServer.on_error", (self, excpt))
def handle_request(self, query, request):
"""
when a request is received, handle it and returns the response pdu
"""
request_pdu = ""
try:
#extract the pdu and the slave id
(slave_id, request_pdu) = query.parse_request(request)
#get the slave and let him executes the action
if slave_id == 0:
#broadcast
for key in self._slaves:
self._slaves[key].handle_request(request_pdu, broadcast=True)
return
else:
slave = self.get_slave(slave_id)
response_pdu = slave.handle_request(request_pdu)
#make the full response
response = query.build_response(response_pdu)
return response
except Exception, excpt:
call_hooks("modbus.Databank.on_error", (self, excpt, request_pdu))
LOGGER.error("handle request failed: " + str(excpt))
def _recv(self, expected_length=-1):
"""Receive the response from the slave"""
response = ""
read_bytes = "dummy"
while read_bytes:
read_bytes = self._serial.read(1)
response += read_bytes
if expected_length>=0 and len(response)>=expected_length:
#if the expected number of byte is received consider that the response is done
#improve performance by avoiding end-of-response detection by timeout
break
retval = call_hooks("modbus_rtu.RtuMaster.after_recv", (self, response))
if retval <> None:
return retval
return response
def _send(self, request):
"""Send request to the slave"""
retval = call_hooks("modbus_rtu.RtuMaster.before_send", (self, request))
if retval <> None:
request = retval
self._serial.flushInput()
self._serial.flushOutput()
self._serial.setRTS(True) # MJC RS485 hack
self._serial.write(request)
time.sleep(1 * self._t0)
#time.sleep(len(request) * self._t0)
self._serial.setRTS(False) # MJC RS485 hack
time.sleep(3.5 * self._t0)
self._serial.flushInput()
def _recv(self, expected_length=-1, expected_address=None):
"""Receive the response from the slave.
expected_address is used if there is noise or other nastiness on the
serial line. It is used to look for the start of a response."""
response = ""
# first_byte is made true when we find the exp. addr. in the data stream
#If exp_addr isn't specified, we just take the first byte we get.
first_byte = False if expected_address else True
read_bytes = "dummy"
start_time = time.time()
while read_bytes:
try: #BRFIX
read_bytes = self._serial.read(1)
if first_byte:
pass #We're mid packet -- just keep processing the response
elif read_bytes != expected_address:
#ignore this byte and keep looking for expected_address
if (time.time()-start_time) > self._serial.timeout:
#This call should time out
return ''
continue
elif read_bytes == expected_address:
first_byte = True
pass #keep going with response processing
except OSError as error:
if error.errno == 11: #This is error EAGAIN-> "Try again later"
print ("BRDEBUG: Errno 11 caught. Trying again." +
"Response: '%s'" % response)
return response + self._recv(expected_length, expected_address) #Try again
else:
raise error
response += read_bytes
if expected_length>=0 and len(response)>=expected_length:
#if the expected number of byte is received consider that the i
#response is done
#improve performance by avoiding end-of-response detection by timeout
break
retval = call_hooks("modbus_rtu.RtuMaster.after_recv", (self, response))
if retval <> None:
return retval
return response
def _recv(self, expected_length=-1):
"""
Receive the response from the slave
Do not take expected_length into account because the length of the response is
written in the mbap. Used for RTU only
"""
response = ""
##################### Modified by yaoming.lin on 2013-07-09 ####################
is_ok = True
#read the 5 bytes of the pdu message
while (len(response) < 5) and is_ok:
new_byte = self._sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
response += new_byte
if is_ok:
#read the rest of the request
#length = self._get_request_length(request)
if ord(response[1]) < 7: # Modified by yaoming.lin on 2015-08-17
length = ord(response[2]) + 5
elif ord(response[1]) < 17:
length = 8
else:
length = 5
while (len(response) < length) and is_ok:
new_byte = self._sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
response += new_byte
################################################################################
retval = call_hooks("modbus_rtu_over_tcp.RtuOverTcpMaster.after_recv", (self, response))
if retval <> None:
return response
return response
def _recv(self, expected_length=-1):
"""
Receive the response from the slave
Do not take expected_length into account because the length of the response is
written in the mbap. Used for RTU only
"""
response = ""
length = 255
while len(response)<length:
rcv_byte = self._sock.recv(1)
if rcv_byte:
response += rcv_byte
if len(response) == 6:
(tr_id, pr_id, to_be_recv_length) = struct.unpack(">HHH", response)
length = to_be_recv_length + 6
else:
break
retval = call_hooks("modbus_tcp.TcpMaster.after_recv", (self, response))
if retval <> None:
return response
return response
def _recv(self, expected_length=-1):
"""Receive the response from the slave"""
response = ""
read_bytes = self._serial.read(1)
while read_bytes:
#read_bytes = self._serial.read(1)
if len(response) == 0:
# MJC RS485 hack, 1st rx byte may be crud throw it away
if struct.unpack(">B", read_bytes[0])[0] < 248:
response += read_bytes
else:
response += read_bytes
if expected_length>=0 and len(response)>=expected_length:
#if the expected number of byte is received consider that the response is done
#improve performance by avoiding end-of-response detection by timeout
break
read_bytes = self._serial.read(1)
retval = call_hooks("modbus_rtu.RtuMaster.after_recv", (self, response))
if retval <> None:
return retval
return response
def _recv(self, expected_length=-1, expected_address=None):
"""
Receive the response from the slave
Do not take expected_length into account because the length of the
response is written in the mbap. Used for RTU only.
Expected address is used for parsing dirty streams in RTU mode.
This parameter is not necessary for TCP mode.
"""
response = ""
length = 255
while len(response)<length:
rcv_byte = self._sock.recv(1)
if rcv_byte:
response += rcv_byte
if len(response) == 6:
(tr_id, pr_id, to_be_recv_length) = struct.unpack(">HHH", response)
length = to_be_recv_length + 6
else:
break
retval = call_hooks("modbus_tcp.TcpMaster.after_recv", (self, response))
if retval <> None:
return response
return response
def _do_init(self):
"""initialize the serial connection"""
if not self._serial.isOpen():
call_hooks("modbus_rtu.RtuServer.before_open", (self, ))
self._serial.open()
call_hooks("modbus_rtu.RtuServer.after_open", (self, ))
def close(self):
"""close the serial communication"""
if self._serial.isOpen():
call_hooks("modbus_rtu.RtuServer.before_close", (self, ))
self._serial.close()
call_hooks("modbus_rtu.RtuServer.after_close", (self, ))
def execute(self,
slave,
function_code,
starting_address,
quantity_of_x=0,
output_value=0,
data_format="",
expected_length=-1):
"""
Execute a modbus query and returns the data part of the answer as a tuple
The returned tuple depends on the query function code. see modbus protocol
specification for details
data_format makes possible to extract the data like defined in the
struct python module documentation
"""
pdu = ""
is_read_function = False
nb_of_digits = 0
#open the connection if it is not already done
self.open()
#Build the modbus pdu and the format of the expected data.
#It depends of function code. see modbus specifications for details.
if function_code == defines.READ_COILS or function_code == defines.READ_DISCRETE_INPUTS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address,
quantity_of_x)
byte_count = quantity_of_x / 8
if (quantity_of_x % 8) > 0:
byte_count += 1
nb_of_digits = quantity_of_x
if not data_format:
data_format = ">" + (byte_count * "B")
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = byte_count + 5 #slave + func + bytcodeLen + bytecode + crc1 + crc2
elif function_code == defines.READ_INPUT_REGISTERS or function_code == defines.READ_HOLDING_REGISTERS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address,
quantity_of_x)
if not data_format:
data_format = ">" + (quantity_of_x * "H")
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = 2 * quantity_of_x + 5 #slave + func + bytcodeLen + bytecode x 2 + crc1 + crc2
elif (function_code == defines.WRITE_SINGLE_COIL) or (
function_code == defines.WRITE_SINGLE_REGISTER):
if function_code == defines.WRITE_SINGLE_COIL:
if output_value != 0:
output_value = 0xff00
pdu = struct.pack(">BHH", function_code, starting_address,
output_value)
if not data_format:
data_format = ">HH"
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = 8 #slave + func + adress1 + adress2 + value1+value2 + crc1 + crc2
elif function_code == defines.WRITE_MULTIPLE_COILS:
byte_count = len(output_value) / 8
if (len(output_value) % 8) > 0:
byte_count += 1
pdu = struct.pack(">BHHB", function_code, starting_address,
len(output_value), byte_count)
i, byte_value = 0, 0
for j in output_value:
if j > 0:
byte_value += pow(2, i)
if i == 7:
pdu += struct.pack(">B", byte_value)
i, byte_value = 0, 0
else:
i += 1
if i > 0:
pdu += struct.pack(">B", byte_value)
if not data_format:
data_format = ">HH"
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = 8 #slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
elif function_code == defines.WRITE_MULTIPLE_REGISTERS:
byte_count = 2 * len(output_value)
pdu = struct.pack(">BHHB", function_code, starting_address,
len(output_value), byte_count)
for j in output_value:
pdu += struct.pack(">H", j)
if not data_format:
data_format = ">HH"
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = 8 #slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
else:
raise ModbusFunctionNotSupportedError(
"The %d function code is not supported. " % (function_code))
# instantiate a query which implements the MAC (TCP or RTU) part of the protocol
query = self._make_query()
# add the mac part of the protocol to the request
request = query.build_request(pdu, slave)
# send the request to the slave
retval = call_hooks("modbus.Master.before_send", (self, request))
if retval <> None:
request = retval
if self._verbose:
LOGGER.debug(utils.get_log_buffer("-> ", request))
self._send(request)
call_hooks("modbus.Master.after_send", (self))
if slave != 0:
# receive the data from the slave
response = self._recv(expected_length)
retval = call_hooks("modbus.Master.after_recv", (self, response))
if retval <> None:
response = retval
if self._verbose:
LOGGER.debug(utils.get_log_buffer("<- ", response))
# extract the pdu part of the response
response_pdu = query.parse_response(response)
# analyze the received data
(return_code, byte_2) = struct.unpack(">BB", response_pdu[0:2])
if return_code > 0x80:
# the slave has returned an error
exception_code = byte_2
raise ModbusError(exception_code)
else:
if is_read_function:
# get the values returned by the reading function
byte_count = byte_2
data = response_pdu[2:]
if byte_count != len(data):
# the byte count in the pdu is invalid
raise ModbusInvalidResponseError, "Byte count is %d while actual number of bytes is %d. " \
% (byte_count, len(data))
else:
# returns what is returned by the slave after a writing function
data = response_pdu[1:]
#returns the data as a tuple according to the data_format
#(calculated based on the function or user-defined)
result = struct.unpack(data_format, data)
if nb_of_digits > 0:
digits = []
for byte_val in result:
for i in xrange(8):
if (len(digits) >= nb_of_digits):
break
digits.append(byte_val % 2)
byte_val = byte_val >> 1
result = tuple(digits)
return result
def _do_run(self):
"""called in a almost-for-ever loop by the server"""
#check the status of every socket
inputready, outputready, exceptready = select.select(self._sockets, [], [], 1.0)
for sock in inputready: #handle data on each a socket
try:
if sock == self._sock:
# handle the server socket
client, address = self._sock.accept()
client.setblocking(0)
LOGGER.info("%s is connected with socket %d..." % (str(address), client.fileno()))
self._sockets.append(client)
call_hooks("modbus_tcp.TcpServer.on_connect", (self, client, address))
else:
if len(sock.recv(1, socket.MSG_PEEK)) == 0:
#socket is disconnected
LOGGER.info("%d is disconnected" % (sock.fileno()))
call_hooks("modbus_tcp.TcpServer.on_disconnect", (self, sock))
sock.close()
self._sockets.remove(sock)
break
# handle all other sockets
sock.settimeout(1.0)
request = ""
is_ok = True
#read the 7 bytes of the mbap
while (len(request) < 7) and is_ok:
new_byte = sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
retval = call_hooks("modbus_tcp.TcpServer.after_recv", (self, sock, request))
if retval <> None:
request = retval
if is_ok:
#read the rest of the request
length = self._get_request_length(request)
while (len(request) < (length + 6)) and is_ok:
new_byte = sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
if is_ok:
response = ""
#parse the request
try:
response = self._handle(request)
except Exception, msg:
LOGGER.error("Error while handling a request, Exception occurred: %s", msg)
#send back the response
if response:
try:
retval = call_hooks("modbus_tcp.TcpServer.before_send", (self, sock, response))
if retval <> None:
response = retval
sock.send(response)
except Exception, msg:
is_ok = False
LOGGER.error("Error while sending on socket %d, Exception occurred: %s", \
sock.fileno(), msg)
def execute(self, slave, function_code, starting_address,
quantity_of_x=0, output_value=0, data_format="", expected_length=-1):
"""
Execute a modbus query and returns the data part of the answer as a tuple
The returned tuple depends on the query function code. see modbus protocol
specification for details
data_format makes possible to extract the data like defined in the
struct python module documentation
"""
pdu = ""
is_read_function = False
nb_of_digits = 0
#open the connection if it is not already done
self.open()
#Build the modbus pdu and the format of the expected data.
#It depends of function code. see modbus specifications for details.
if function_code == defines.READ_COILS or function_code == defines.READ_DISCRETE_INPUTS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address, quantity_of_x)
byte_count = quantity_of_x / 8
if (quantity_of_x % 8) > 0:
byte_count += 1
nb_of_digits = quantity_of_x
if not data_format:
data_format = ">"+(byte_count*"B")
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = byte_count + 5 #slave + func + bytcodeLen + bytecode + crc1 + crc2
elif function_code == defines.READ_INPUT_REGISTERS or function_code == defines.READ_HOLDING_REGISTERS:
is_read_function = True
pdu = struct.pack(">BHH", function_code, starting_address, quantity_of_x)
if not data_format:
data_format = ">"+(quantity_of_x*"H")
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = 2*quantity_of_x + 5 #slave + func + bytcodeLen + bytecode x 2 + crc1 + crc2
elif (function_code == defines.WRITE_SINGLE_COIL) or (function_code == defines.WRITE_SINGLE_REGISTER):
if function_code == defines.WRITE_SINGLE_COIL:
if output_value != 0:
output_value = 0xff00
pdu = struct.pack(">BHH", function_code, starting_address, output_value)
if not data_format:
data_format = ">HH"
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = 8 #slave + func + adress1 + adress2 + value1+value2 + crc1 + crc2
elif function_code == defines.WRITE_MULTIPLE_COILS:
byte_count = len(output_value) / 8
if (len(output_value) % 8) > 0:
byte_count += 1
pdu = struct.pack(">BHHB", function_code, starting_address, len(output_value), byte_count)
i, byte_value = 0, 0
for j in output_value:
if j > 0:
byte_value += pow(2, i)
if i == 7:
pdu += struct.pack(">B", byte_value)
i, byte_value = 0, 0
else:
i += 1
if i > 0:
pdu += struct.pack(">B", byte_value)
if not data_format:
data_format = ">HH"
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = 8 #slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
elif function_code == defines.WRITE_MULTIPLE_REGISTERS:
byte_count = 2 * len(output_value)
pdu = struct.pack(">BHHB", function_code, starting_address, len(output_value), byte_count)
for j in output_value:
pdu += struct.pack(">H", j)
if not data_format:
data_format = ">HH"
if expected_length < 0: #No lenght was specified and calculated length can be used:
expected_length = 8 #slave + func + adress1 + adress2 + outputQuant1 + outputQuant2 + crc1 + crc2
else:
raise ModbusFunctionNotSupportedError("The %d function code is not supported. " % (function_code))
# instantiate a query which implements the MAC (TCP or RTU) part of the protocol
query = self._make_query()
# add the mac part of the protocol to the request
request = query.build_request(pdu, slave)
# send the request to the slave
retval = call_hooks("modbus.Master.before_send", (self, request))
if retval <> None:
request = retval
if self._verbose:
LOGGER.debug(utils.get_log_buffer("-> ", request))
self._send(request)
call_hooks("modbus.Master.after_send", (self))
if slave != 0:
# receive the data from the slave
response = self._recv(expected_length)
retval = call_hooks("modbus.Master.after_recv", (self, response))
if retval <> None:
response = retval
if self._verbose:
LOGGER.debug(utils.get_log_buffer("<- ", response))
# extract the pdu part of the response
response_pdu = query.parse_response(response)
# analyze the received data
(return_code, byte_2) = struct.unpack(">BB", response_pdu[0:2])
if return_code > 0x80:
# the slave has returned an error
exception_code = byte_2
raise ModbusError(exception_code)
else:
if is_read_function:
# get the values returned by the reading function
byte_count = byte_2
data = response_pdu[2:]
if byte_count != len(data):
# the byte count in the pdu is invalid
raise ModbusInvalidResponseError, "Byte count is %d while actual number of bytes is %d. " \
% (byte_count, len(data))
else:
# returns what is returned by the slave after a writing function
data = response_pdu[1:]
#returns the data as a tuple according to the data_format
#(calculated based on the function or user-defined)
result = struct.unpack(data_format, data)
if nb_of_digits > 0:
digits = []
for byte_val in result:
for i in xrange(8):
if (len(digits) >= nb_of_digits):
break
digits.append(byte_val % 2)
byte_val = byte_val >> 1
result = tuple(digits)
return result
def _do_close(self):
"""Close the serial port if still opened"""
if self._serial.isOpen():
self._serial.close()
call_hooks("modbus_rtu.RtuMaster.after_close", (self, ))
def _read_holding_registers(self, request_pdu):
"""handle read coils modbus function"""
call_hooks("modbus.Slave.handle_read_holding_registers_request", (self, request_pdu))
return self._read_registers(defines.HOLDING_REGISTERS, request_pdu)
def _read_input_registers(self, request_pdu):
"""handle read coils modbus function"""
call_hooks("modbus.Slave.handle_read_input_registers_request", (self, request_pdu))
return self._read_registers(defines.ANALOG_INPUTS, request_pdu)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
if is_ok:
response = ""
#parse the request
try:
response = self._handle(request)
except Exception, msg:
LOGGER.error("Error while handling a request, Exception occurred: %s", msg)
#send back the response
if response:
try:
retval = call_hooks("modbus_tcp.TcpServer.before_send", (self, sock, response))
if retval <> None:
response = retval
sock.send(response)
except Exception, msg:
is_ok = False
LOGGER.error("Error while sending on socket %d, Exception occurred: %s", \
sock.fileno(), msg)
except Exception, excpt:
LOGGER.warning("Error while processing data on socket %d: %s", sock.fileno(), excpt)
call_hooks("modbus_tcp.TcpServer.on_error", (self, sock, excpt))
sock.close()
self._sockets.remove(sock)
def _read_input_registers(self, request_pdu):
"""handle read coils modbus function"""
call_hooks("modbus.Slave.handle_read_input_registers_request", (self, request_pdu))
return self._read_registers(defines.ANALOG_INPUTS, request_pdu)
def _do_open(self):
"""Open the given serial port if not already opened"""
if not self._serial.isOpen():
call_hooks("modbus_rtu.RtuMaster.before_open", (self, ))
self._serial.open()
def close(self):
"""close the serial communication"""
if self._serial.isOpen():
call_hooks("modbus_rtu.RtuServer.before_close", (self, ))
self._serial.close()
call_hooks("modbus_rtu.RtuServer.after_close", (self, ))
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
if is_ok:
response = ""
#parse the request
try:
response = self._handle(request)
except Exception, msg:
LOGGER.error("Error while handling a request, Exception occurred: %s", msg)
#send back the response
if response:
try:
retval = call_hooks("modbus_tcp.TcpServer.before_send", (self, sock, response))
if retval <> None:
response = retval
sock.send(response)
except Exception, msg:
is_ok = False
LOGGER.error("Error while sending on socket %d, Exception occurred: %s", \
sock.fileno(), msg)
except Exception, excpt:
LOGGER.warning("Error while processing data on socket %d: %s", sock.fileno(), excpt)
call_hooks("modbus_tcp.TcpServer.on_error", (self, sock, excpt))
sock.close()
self._sockets.remove(sock)
def _do_init(self):
"""initialize the serial connection"""
if not self._serial.isOpen():
call_hooks("modbus_rtu.RtuServer.before_open", (self, ))
self._serial.open()
call_hooks("modbus_rtu.RtuServer.after_open", (self, ))
def _read_discrete_inputs(self, request_pdu):
call_hooks("modbus.Slave.handle_read_discrete_inputs_request", (self, request_pdu))
"""handle read coils modbus function"""
return self._read_digital(defines.DISCRETE_INPUTS, request_pdu)
def _do_open(self):
"""Open the given serial port if not already opened"""
if not self._serial.isOpen():
call_hooks("modbus_rtu.RtuMaster.before_open", (self, ))
self._serial.open()
def _do_run(self):
"""called in a almost-for-ever loop by the server"""
#check the status of every socket
inputready, outputready, exceptready = select.select(self._sockets, [], [], 1.0)
for sock in inputready: #handle data on each a socket
try:
if sock == self._sock:
# handle the server socket
client, address = self._sock.accept()
client.setblocking(0)
LOGGER.info("%s is connected with socket %d..." % (str(address), client.fileno()))
self._sockets.append(client)
call_hooks("modbus_tcp.TcpServer.on_connect", (self, client, address))
else:
if len(sock.recv(1, socket.MSG_PEEK)) == 0:
#socket is disconnected
LOGGER.info("%d is disconnected" % (sock.fileno()))
call_hooks("modbus_tcp.TcpServer.on_disconnect", (self, sock))
sock.close()
self._sockets.remove(sock)
break
# handle all other sockets
sock.settimeout(1.0)
request = ""
is_ok = True
#read the 7 bytes of the mbap
while (len(request) < 7) and is_ok:
new_byte = sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
retval = call_hooks("modbus_tcp.TcpServer.after_recv", (self, sock, request))
if retval <> None:
request = retval
if is_ok:
#read the rest of the request
length = self._get_request_length(request)
while (len(request) < (length + 6)) and is_ok:
new_byte = sock.recv(1)
if len(new_byte) == 0:
is_ok = False
else:
request += new_byte
if is_ok:
response = ""
#parse the request
try:
response = self._handle(request)
except Exception, msg:
LOGGER.error("Error while handling a request, Exception occurred: %s", msg)
#send back the response
if response:
try:
retval = call_hooks("modbus_tcp.TcpServer.before_send", (self, sock, response))
if retval <> None:
response = retval
sock.send(response)
except Exception, msg:
is_ok = False
LOGGER.error("Error while sending on socket %d, Exception occurred: %s", \
sock.fileno(), msg)
def _do_close(self):
"""Close the serial port if still opened"""
if self._serial.isOpen():
self._serial.close()
call_hooks("modbus_rtu.RtuMaster.after_close", (self, ))
def __setitem__(self, r, v):
""""""
call_hooks("modbus.ModbusBlock.setitem", (self, r, v))
return self._data.__setitem__(r, v)
def _read_coils(self, request_pdu):
"""handle read coils modbus function"""
call_hooks("modbus.Slave.handle_read_coils_request", (self, request_pdu))
return self._read_digital(defines.COILS, request_pdu)
def _read_holding_registers(self, request_pdu):
"""handle read coils modbus function"""
call_hooks("modbus.Slave.handle_read_holding_registers_request", (self, request_pdu))
return self._read_registers(defines.HOLDING_REGISTERS, request_pdu)
def __setitem__(self, r, v):
""""""
call_hooks("modbus.ModbusBlock.setitem", (self, r, v))
return self._data.__setitem__(r, v)