def homeY(instance):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(193, 1, 1)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(194, 1, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
s = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(s)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, 13, 0, 1, 0, 0, 0, 0)
y = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(y)
self.terminal.text += "Home Y\n"
self.yTravel.text = "0"
def homeB(instance):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(193, 3, 1)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(194, 3, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
s = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(s)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, 13, 0, 3, 0, 0, 0, 0)
a = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(b)
self.terminal.text += "Home B\n"
self.bTravel.text = "0"
def STOP(instance):
print("RESET!!")
self.terminal.text += "Reset\n"
try:
f = open("comm.pickle", "rb")
pid = pickle.load(f)
f.close()
os.system("rm comm.pickle")
os.system("kill " + str(pid))
except:
print("no comm.pickle")
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.MST(motor)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(
1, b2, b3, b4, b5, b6, b7, b8)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
sleep(0.001)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(1, motor, 0)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(
1, b2, b3, b4, b5, b6, b7, b8)
p = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(p)
sleep(0.001)
sleep(0.001)
send = Gcode.M104(0)[1]
ser.write(send)
def homeX(instance):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(193, 0, 1)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(194, 0, 2000)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
s = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(s)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, 13, 0, 0, 0, 0, 0, 0)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
self.terminal.text += "Home X\n"
self.xTravel.text = "0"
def sett(btn):
if self.feed.text == "":
print("error")
self.terminal.text += "FeedrateError\n"
else:
value = int(self.feed.text)
print(self.feed.text)
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, motor, value)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(
1, b2, b3, b4, b5, b6, b7, b8)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
sleep(0.001)
self.terminal.text += "Feedrate set to: " + self.feed.text + "\n"
def action(r):
r = r.decode("utf-8")
#import globalnich promennych do funkce
global mode
global st
global proceed
global lastx, lasty, lasta, lastb
global feedG0, feedG1
#zpracovani prikazu G0 pro pohyb
if r.find("G0\n") != -1:
log.write("G0")
x = r.find("X")
y = r.find("Y")
a = r.find("A")
b = r.find("B")
if (x == -1) or (y == -1) or (a == -1) or (b == -1):
return
try:
xx = float(r[x + 1:y - 1])
yy = float(r[y + 1:a - 1])
aa = float(r[a + 1:b - 1])
bb = float(r[b + 1:])
log.write("X " + str(xx) + "\n")
log.write("Y " + str(yy) + "\n")
log.write("A " + str(aa) + "\n")
log.write("B " + str(bb) + "\n")
yy = 420 - yy
bb = 420 - bb
except:
return
x, y, a, b = Gcode.G0(xx, yy, aa, bb)
nx = abs(xx - lastx)
ny = abs(yy - lasty)
na = abs(aa - lasta)
nb = abs(bb - lastb)
mx = max(nx, ny, na, nb)
log.write("new X " + str(nx) + "\n")
log.write("new Y " + str(ny) + "\n")
log.write("new A " + str(na) + "\n")
log.write("new B " + str(nb) + "\n")
log.write("max travel " + str(mx) + "\n")
#------------------------------interpolation--------------------------------------------
fx, fy, fa, fb = nx, ny, na, nb
if mx == 0:
mx = 1
if fx == 0:
fx = mx
if fy == 0:
fy = mx
if fa == 0:
fa = mx
if fb == 0:
fb = mx
fx = int(feedG0 / (mx / fx))
fy = int(feedG0 / (mx / fy))
fa = int(feedG0 / (mx / fa))
fb = int(feedG0 / (mx / fb))
log.write("feed X " + str(fx) + "\n")
log.write("feed Y " + str(fy) + "\n")
log.write("feed A " + str(fa) + "\n")
log.write("feed B " + str(fb) + "\n")
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, 0, fx)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(st)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, 1, fy)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(st)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, 2, fa)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(st)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, 3, fb)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(st)
#---------------------------interpolation-end-------------------------------------------
lastx, lasty, lasta, lastb = xx, yy, aa, bb
if nx == mx:
ser.write(bytearray([1, 138, 0, 0, 0, 0, 0, 1, 140]))
sleep(st)
ser.write(x)
sleep(st)
ser.write(y)
sleep(st)
ser.write(a)
sleep(st)
ser.write(b)
print("OK1")
log.write("OK1\n")
pass
elif ny == mx:
ser.write(bytearray([1, 138, 0, 0, 0, 0, 0, 2, 141]))
sleep(st)
ser.write(y)
sleep(st)
ser.write(x)
sleep(st)
ser.write(a)
sleep(st)
ser.write(b)
print("OK2")
log.write("OK2\n")
pass
elif na == mx:
ser.write(bytearray([1, 138, 0, 0, 0, 0, 0, 4, 143]))
sleep(st)
ser.write(a)
sleep(st)
ser.write(y)
sleep(st)
ser.write(x)
sleep(st)
ser.write(b)
print("OK3")
log.write("OK3\n")
pass
else:
ser.write(bytearray([1, 138, 0, 0, 0, 0, 0, 8, 147]))
sleep(st)
ser.write(b)
sleep(st)
ser.write(y)
sleep(st)
ser.write(a)
sleep(st)
ser.write(x)
print("OK4")
log.write("OK4\n")
pass
#zpracovani prikazu G1 pro pohyb
elif r.find("G1") != -1:
log.write("G1\n")
x = r.find("X")
y = r.find("Y")
a = r.find("A")
b = r.find("B")
if (x == -1) or (y == -1) or (a == -1) or (b == -1):
return
try:
xx = float(r[x + 1:y - 1])
yy = float(r[y + 1:a - 1])
aa = float(r[a + 1:b - 1])
bb = float(r[b + 1:])
log.write("X " + str(xx) + "\n")
log.write("Y " + str(yy) + "\n")
log.write("A " + str(aa) + "\n")
log.write("B " + str(bb) + "\n")
yy = 420 - yy
bb = 420 - bb
except:
return
x, y, a, b = Gcode.G0(xx, yy, aa, bb)
nx = abs(xx - lastx)
ny = abs(yy - lasty)
na = abs(aa - lasta)
nb = abs(bb - lastb)
mx = max(nx, ny, na, nb)
log.write("new X " + str(nx) + "\n")
log.write("new Y " + str(ny) + "\n")
log.write("new A " + str(na) + "\n")
log.write("new B " + str(nb) + "\n")
log.write("max travel " + str(mx) + "\n")
#------------------------------interpolation--------------------------------------------
fx, fy, fa, fb = nx, ny, na, nb
if mx == 0:
mx = 1
if fx == 0:
fx = mx
if fy == 0:
fy = mx
if fa == 0:
fa = mx
if fb == 0:
fb = mx
fx = int(feedG1 / (mx / fx))
fy = int(feedG1 / (mx / fy))
fa = int(feedG1 / (mx / fa))
fb = int(feedG1 / (mx / fb))
log.write("feed X " + str(fx) + "\n")
log.write("feed Y " + str(fy) + "\n")
log.write("feed A " + str(fa) + "\n")
log.write("feed B " + str(fb) + "\n")
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, 0, fx)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(st)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, 1, fy)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(st)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, 2, fa)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(st)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, 3, fb)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(st)
#---------------------------interpolation-end-------------------------------------------
lastx, lasty, lasta, lastb = xx, yy, aa, bb
if nx == mx:
ser.write(bytearray([1, 138, 0, 0, 0, 0, 0, 1, 140]))
sleep(st)
ser.write(x)
sleep(st)
ser.write(y)
sleep(st)
ser.write(a)
sleep(st)
ser.write(b)
print("OK1")
log.write("OK1\n")
pass
elif ny == mx:
ser.write(bytearray([1, 138, 0, 0, 0, 0, 0, 2, 141]))
sleep(st)
ser.write(y)
sleep(st)
ser.write(x)
sleep(st)
ser.write(a)
sleep(st)
ser.write(b)
print("OK2")
log.write("OK2\n")
pass
elif na == mx:
ser.write(bytearray([1, 138, 0, 0, 0, 0, 0, 4, 143]))
sleep(st)
ser.write(a)
sleep(st)
ser.write(y)
sleep(st)
ser.write(x)
sleep(st)
ser.write(b)
print("OK3")
log.write("OK3\n")
pass
else:
ser.write(bytearray([1, 138, 0, 0, 0, 0, 0, 8, 147]))
sleep(st)
ser.write(b)
sleep(st)
ser.write(y)
sleep(st)
ser.write(a)
sleep(st)
ser.write(x)
print("OK4")
log.write("OK4\n")
pass
#zpracovani prikazu G28 pro homeni
elif r.find("G28") != -1:
log.write("G28\n")
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(193, motor, 1)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
sleep(sth)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(194, motor, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
s = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(s)
sleep(sth)
x, y, a, b = Gcode.G28()
ser.write(x)
sleep(sth)
ser.write(y)
sleep(sth)
ser.write(a)
sleep(sth)
ser.write(b)
sleep(sth)
#zpracovani prikazu G90 pro zmenu modu na ABS
elif r.find("G90") != -1:
global mode
mode = Gcode.G90()
log.write("G90\n")
#zpracovani prikazu G91 pro zmenu modu na REL
elif r.find("G91") != -1:
mode = Gcode.G91()
log.write("G91\n")
#zpracovani prikazu M104 pro nahrivani
elif r.find("M104") != -1:
a = r.find("S")
if a == -1:
return
temp = int(r[a + 1:])
heat, send = Gcode.M104(temp)
ser.write(send)
sleep(st)
log.write("M104\n")
log.write("Temp " + str(temp) + "\n")
#zpracovani prikazu M600 pro cekani
elif r.find("M600") != -1:
a = r.find("S")
if a == -1:
return
t = int(r[a + 1:])
Gcode.M600(t)
log.write("M600\n")
log.write("Time " + str(t) + "\n")
#zpracovani prikazu F, pro feedrate
elif r.find("F") != -1:
a = r.find("F")
if a == -1:
return
t = int(r[a + 1:])
if t <= 2047:
feedG1 = t
log.write("Feedrate " + str(feedG1) + "\n")
else:
print("Too much feedrate!")
log.write("Too much feedrate!\n")
#zpracovani prikazu MST pro okamzite zastaveni motoru (nepouzivane)
elif r.find("MST") != -1:
log.write("MST\n")
for motor in range(0, 4):
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, 3, 0, motor, 0, 0, 0,
0)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
sleep(st)
#reseni prazdnych radku a radku s "#"
elif r == "":
nothing, temp = Gcode.M104(0)
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, motor, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(0.001)
if os.path.exists("/home/pi") or os.path.exists("/home/rpi"):
os.system("kill " + str(emerg_pid))
GPIO.output(4, GPIO.LOW)
ser.write(temp)
log.write("Empty string\n")
log.close()
elif r == "#":
nothing, temp = Gcode.M104(0)
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, motor, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(0.001)
if os.path.exists("/home/pi") or os.path.exists("/home/rpi"):
os.system("kill " + str(emerg_pid))
GPIO.output(4, GPIO.LOW)
ser.write(temp)
log.write("String = #\n")
log.close()
else:
nothing, temp = Gcode.M104(0)
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, motor, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(0.001)
if os.path.exists("/home/pi") or os.path.exists("/home/rpi"):
os.system("kill " + str(emerg_pid))
GPIO.output(4, GPIO.LOW)
ser.write(temp)
log.write("Unknown string\n")
log.close()
def command(instance):
t = self.command.text
global mode
if t.find("G0") != -1:
print("G0")
x = t.find("X")
y = t.find("Y")
a = t.find("A")
b = t.find("B")
if (x == -1) or (y == -1) or (a == -1) or (b == -1):
self.terminal.text += "Command must be in form: G0 X Y A B\n"
return
try:
xx = int(t[x + 1:y - 1])
yy = int(t[y + 1:a - 1])
aa = int(t[a + 1:b - 1])
bb = int(t[b + 1:])
except:
self.terminal.text += "Command must be in form: G0 X Y A B\n"
return
x, y, a, b = Gcode.G0(xx, yy, aa, bb)
ser.write(x)
sleep(0.001)
ser.write(y)
sleep(0.001)
ser.write(a)
sleep(0.001)
ser.write(b)
self.terminal.text += t + "\n"
self.command.text = ""
elif t.find("G1") != -1:
print("G1")
x = t.find("X")
y = t.find("Y")
a = t.find("A")
b = t.find("B")
if (x == -1) or (y == -1) or (a == -1) or (b == -1):
self.terminal.text += "Command must be in form: G1 X Y A B\n"
return
try:
xx = int(t[x + 1:y - 1])
yy = int(t[y + 1:a - 1])
aa = int(t[a + 1:b - 1])
bb = int(t[b + 1:])
except:
self.terminal.text += "Command must be in form: G1 X Y A B\n"
return
x, y, a, b = Gcode.G1(xx, yy, aa, bb)
ser.write(x)
sleep(0.001)
ser.write(y)
sleep(0.001)
ser.write(a)
sleep(0.001)
ser.write(b)
self.terminal.text += t + "\n"
self.command.text = ""
elif t.find("G28") != -1:
print("G28")
x, y, a, b = Gcode.G28()
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(193, motor, 1)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(
1, b2, b3, b4, b5, b6, b7, b8)
m = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(m)
sleep(0.001)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(194, motor, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(
1, b2, b3, b4, b5, b6, b7, b8)
s = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(s)
sleep(0.001)
ser.write(x)
sleep(0.001)
ser.write(y)
sleep(0.001)
ser.write(a)
sleep(0.001)
ser.write(b)
self.terminal.text += t + "\n"
self.command.text = ""
self.xTravel.text = "0"
self.yTravel.text = "0"
self.aTravel.text = "0"
self.bTravel.text = "0"
elif t.find("G90") != -1:
global mode
mode = Gcode.G90()
print("G90")
self.terminal.text += t + "\n"
self.command.text = ""
elif t.find("G91") != -1:
mode = Gcode.G91()
print("G91")
self.terminal.text += t + "\n"
self.command.text = ""
elif t.find("M104") != -1:
a = t.find("S")
if a == -1:
self.terminal.text += "Command must be in form: M104 S\n"
return
temp = int(t[a + 1:])
heat, send = Gcode.M104(temp)
print(heat)
ser.write(send)
self.terminal.text += t + "\n"
self.command.text = ""
elif t.find("MST") != -1:
for motor in range(0, 4):
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(
1, 3, 0, motor, 0, 0, 0, 0)
x = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(x)
print("MST")
self.terminal.text += t + "\n"
self.command.text = ""
elif t == "":
self.terminal.text += "No command specified\n"
elif t.find("command") != -1:
if len(t) > 8:
x = t[8:]
subprocess.call(x, shell=True)
else:
self.terminal.text += "Must be in form command <com>"
else:
self.terminal.text += "Unknown command: " + self.command.text + "\n"
self.command.text = ""
def cli(x):
"""
This is CLI for hot wire EPP cutter. For help enter help.
Instructions are:
help - shows help
port - takes one argument, for connecting to selected port
listports - lists all available ports, no arguments
connect - connect to port on which cutter is, no arguments
disconnect - to disconnect from cutter, no arguments
gcode - takes one argument, gcode which will be printing from
cut - for cutting, no arguments
stop - immediate stop of cutting, no arguments
exit - to exit application, note that sender will continue sending gcode to the cutter
G0, G1, G28, G90, G91, M104, MST - as genetral cutter commands, arguments:
G0 X Y A B
G1 X Y A B
G28
G90
G91
M104 S
RESET - for resetting TMCM-6110, reconnect required
command - for direct single line shell command input. If needed more commands
it must be in form: <first command> ; <second command> ; ...
Default port is /dev/ttyACM0
dimensions: X,A = 890;Y,B = 415
"""
t = x
global mode
global serPort
global ser
global file
global globX, globY, globA, globB
#obsluha vlozenych prikazu
if t.find("G0") != -1:
x = t.find("X")
y = t.find("Y")
a = t.find("A")
b = t.find("B")
if (x == -1) or (y == -1) or (a == -1) or (b == -1):
print("Command must be in form: G0 X Y A B\n")
return
try:
xx = int(t[x + 1:y - 1])
yy = int(t[y + 1:a - 1])
aa = int(t[a + 1:b - 1])
bb = int(t[b + 1:])
except:
print("Command must be in form: G0 X Y A B\n")
return
x, y, a, b = Gcode.G0(xx, yy, aa, bb)
if mode == "REL":
globX = globX + xx
globY = globY + yy
globA = globA + aa
globB = globB + bb
if globX <= 900 and globY <= 420 and globA <= 900 and globB <= 420:
ser.write(x)
sleep(0.001)
ser.write(y)
sleep(0.001)
ser.write(a)
sleep(0.001)
ser.write(b)
else:
print("max travel X,A = 900 Y,B = 420")
print("X = " + str(globX))
print("Y = " + str(globY))
print("A = " + str(globA))
print("B = " + str(globB))
else:
if xx <= 900 and yy <= 420 and aa <= 900 and bb <= 420:
globX = xx
globY = yy
globA = aa
globB = bb
ser.write(x)
sleep(0.001)
ser.write(y)
sleep(0.001)
ser.write(a)
sleep(0.001)
ser.write(b)
else:
print("max travel X,A = 900 Y,B = 420")
elif t.find("G1") != -1:
x = t.find("X")
y = t.find("Y")
a = t.find("A")
b = t.find("B")
if (x == -1) or (y == -1) or (a == -1) or (b == -1):
print("Command must be in form: G1 X Y A B\n")
return
try:
xx = int(t[x + 1:y - 1])
yy = int(t[y + 1:a - 1])
aa = int(t[a + 1:b - 1])
bb = int(t[b + 1:])
except:
print("Command must be in form: G1 X Y A B\n")
return
x, y, a, b = Gcode.G1(xx, yy, aa, bb)
if mode == "REL":
globX = globX + xx
globY = globY + yy
globA = globA + aa
globB = globB + bb
if globX <= 900 and globY <= 420 and globA <= 900 and globB <= 420:
ser.write(x)
sleep(0.001)
ser.write(y)
sleep(0.001)
ser.write(a)
sleep(0.001)
ser.write(b)
else:
print("max travel X,A = 900 Y,B = 420")
print("X = " + str(globX))
print("Y = " + str(globY))
print("A = " + str(globA))
print("B = " + str(globB))
else:
if xx <= 900 and yy <= 420 and aa <= 900 and bb <= 420:
globX = xx
globY = yy
globA = aa
globB = bb
ser.write(x)
sleep(0.001)
ser.write(y)
sleep(0.001)
ser.write(a)
sleep(0.001)
ser.write(b)
else:
print("max travel X,A = 900 Y,B = 420")
elif t.find("G28") != -1:
x, y, a, b = Gcode.G28()
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(193, motor, 1)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
m = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(m)
sleep(0.001)
b2, b3, b4, b5, b6, b7, b8 = i.SAP(194, motor, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(1, b2, b3, b4, b5, b6, b7,
b8)
s = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(s)
sleep(0.001)
globX, globY, globA, globB = 0, 0, 0, 0
ser.write(x)
sleep(0.001)
ser.write(y)
sleep(0.001)
ser.write(a)
sleep(0.001)
ser.write(b)
sleep(0.001)
elif t.find("G90") != -1:
mode = Gcode.G90()
elif t.find("G91") != -1:
mode = Gcode.G91()
elif t.find("M104") != -1:
a = t.find("S")
if a == -1:
print("Command must be in form: M104 S\n")
return
temp = int(t[a + 1:])
heat, send = Gcode.M104(temp)
ser.write(send)
elif t.find("RESET") != -1:
RESET()
#zadani serioveho portu
elif t.find("port") != -1:
serPort = t[5:]
#pripojeni k portu
elif t.find("connect") != -1:
try:
ser = Gcode.connection(serPort)
sleep(0.2)
config.func()
for motor in range(0, 4):
b2, b3, b4, b5, b6, b7, b8 = i.SAP(4, motor, 2047)
b1, b2, b3, b4, b5, b6, b7, b8, b9 = par(
1, b2, b3, b4, b5, b6, b7, b8)
byte = bytearray([b1, b2, b3, b4, b5, b6, b7, b8, b9])
ser.write(byte)
sleep(0.001)
except:
""
#odpojeni od portu
elif t.find("disconnect") != -1:
ser.close()
ser = Exceptions()
#zadani cesty k gcode souboru
elif t.find("gcode") != -1:
y = t[6:]
gcoload(y)
#spusteni rezani
elif t.find("cut") != -1:
if file != "":
sendComm()
print("Starting sender")
sleep(1)
openSender()
else:
print("no file for cutting selected")
#zastaveni
elif t.find("stop") != -1:
STOP()
#vypnuti CLI
elif t.find("exit") != -1:
pid = os.getpid()
subprocess.call("kill " + str(pid), shell=True)
#zadani shell prikazu
elif t.find("command") != -1:
if len(t) > 8:
x = t[8:]
subprocess.call(x, shell=True)
else:
subprocess.call(input("command: "), shell=True)
elif t.find("listports") != -1:
PortString = subprocess.check_output("ls /dev/tty*",
shell=True).decode('utf-8')
PortsAvailable = re.findall(r"ttyUSB[\w\.-]+|ttyACM[\w\.-]+",
PortString)
print(PortsAvailable)
#vypsani help
elif t.find("help") != -1:
print(cli.__doc__)
#osetreni nezadaneho nebo spatne zadaneho prikazu
elif t == "":
print("No command given\n")
else:
print("Unknown command: " + t)