def get_in_contact_opts(self):
interaction_options = self.set_interaction_params()
if interaction_options:
trajectory_options = TrajectoryOptions()
trajectory_options.interaction_control = True
trajectory_options.interpolation_type = self._trajType
trajectory_options.interaction_params = interaction_options.to_msg()
return trajectory_options
else:
return None
def joint_angles_in_contact(input_arg):
"""
Move the robot arm to the specified configuration
with the desired interaction control options.
Call using:
$ rosrun intera_examples go_to_joint_angles_in_contact.py [arguments: see below]
-q 0.0 0.0 0.0 0.0 0.0 0.0 0.0
--> Go to joint pose: 0.0 0.0 0.0 0.0 0.0 0.0 0.0 using default settings
-q 0.1 -0.2 0.15 -0.05 -0.08 0.14 -0.04 -s 0.1
--> Go to pose [...] with a speed ratio of 0.1
-q -0.2 0.1 0.1 0.2 -0.3 0.2 0.4 -s 0.9 -a 0.1
--> Go to pose [...] witha speed ratio of 0.9 and an accel ratio of 0.1
--trajType CARTESIAN
--> Use a Cartesian interpolated endpoint path to reach the goal
=== Interaction Mode options ===
-st 1
--> Set the interaction controller state (1 for True, 0 for False) in the current configuration
-k 500.0 500.0 500.0 10.0 10.0 10.0
--> Set K_impedance to [500.0 500.0 500.0 10.0 10.0 10.0] in the current configuration
-m 0
--> Set max_impedance to False for all 6 directions in the current configuration
-m 1 1 0 1 1 1
--> Set max_impedance to [True True False True True True] in the current configuration
-kn 5.0 3.0 5.0 4.0 6.0 4.0 6.0
--> Set K_nullspace to [5.0 3.0 5.0 4.0 6.0 4.0 6.0] in the current configuration
-f 0.0 0.0 30.0 0.0 0.0 0.0
--> Set force_command to [0.0 0.0 30.0 0.0 0.0 0.0] in the current configuration
-ef
--> Set in_endpoint_frame to True in the current configuration
-en 'right_hand'
--> Specify the desired endpoint frame where impedance and force control behaviors are defined
-md 1
--> Set interaction_control_mode to impedance mode for all 6 directions in the current configuration
(1: impedance, 2: force, 3: impedance with force limit, 4: force with motion limit)
-md 1 1 2 1 1 1
--> Set interaction_control_mode to [impedance, impedance, force, impedance, impedance, impedance] in the current configuration
(1: impedance, 2: force, 3: impedance with force limit, 4: force with motion limit)
"""
arg_fmt = argparse.RawDescriptionHelpFormatter
parser = argparse.ArgumentParser(
formatter_class=arg_fmt, description="joint_angles_in_contact.__doc__")
parser.add_argument(
"-q",
"--joint_angles",
type=float,
nargs='+',
default=[0.0, -0.9, 0.0, 1.8, 0.0, -0.9, 0.0],
help="A list of joint angles, one for each of the 7 joints, J0...J6")
parser.add_argument(
"-s",
"--speed_ratio",
type=float,
default=0.1,
help="A value between 0.001 (slow) and 1.0 (maximum joint velocity)")
parser.add_argument(
"-a",
"--accel_ratio",
type=float,
default=0.5,
help="A value between 0.001 (slow) and 1.0 (maximum joint accel)")
parser.add_argument("-t",
"--trajType",
type=str,
default='JOINT',
choices=['JOINT', 'CARTESIAN'],
help="trajectory interpolation type")
parser.add_argument(
"-st",
"--interaction_active",
type=int,
default=1,
choices=[0, 1],
help="Activate (1) or Deactivate (0) interaction controller")
parser.add_argument(
"-k",
"--K_impedance",
type=float,
nargs='+',
default=[1300.0, 1300.0, 1300.0, 30.0, 30.0, 30.0],
help=
"A list of desired stiffnesses, one for each of the 6 directions -- stiffness units are (N/m) for first 3 and (Nm/rad) for second 3 values"
)
parser.add_argument(
"-m",
"--max_impedance",
type=int,
nargs='+',
default=[1, 1, 1, 1, 1, 1],
choices=[0, 1],
help=
"A list of impedance modulation state, one for each of the 6 directions (a single value can be provided to apply the same value to all the directions) -- 0 for False, 1 for True"
)
parser.add_argument(
"-md",
"--interaction_control_mode",
type=int,
nargs='+',
default=[1, 1, 1, 1, 1, 1],
choices=[1, 2, 3, 4],
help=
"A list of desired interaction control mode (1: impedance, 2: force, 3: impedance with force limit, 4: force with motion limit), one for each of the 6 directions"
)
parser.add_argument(
"-fr",
"--interaction_frame",
type=float,
nargs='+',
default=[0, 0, 0, 1, 0, 0, 0],
help=
"Specify the reference frame for the interaction controller -- first 3 values are positions [m] and last 4 values are orientation in quaternion (w, x, y, z)"
)
parser.add_argument(
"-ef",
"--in_endpoint_frame",
action='store_true',
default=False,
help=
"Set the desired reference frame to endpoint frame; otherwise, it is base frame by default"
)
parser.add_argument(
"-en",
"--endpoint_name",
type=str,
default='right_hand',
help=
"Set the desired endpoint frame by its name; otherwise, it is right_hand frame by default"
)
parser.add_argument(
"-f",
"--force_command",
type=float,
nargs='+',
default=[0.0, 0.0, 0.0, 0.0, 0.0, 0.0],
help=
"A list of desired force commands, one for each of the 6 directions -- in force control mode this is the vector of desired forces/torques to be regulated in (N) and (Nm), in impedance with force limit mode this vector specifies the magnitude of forces/torques (N and Nm) that the command will not exceed"
)
parser.add_argument(
"-kn",
"--K_nullspace",
type=float,
nargs='+',
default=[5.0, 10.0, 5.0, 10.0, 5.0, 10.0, 5.0],
help=
"A list of desired nullspace stiffnesses, one for each of the 7 joints (a single value can be provided to apply the same value to all the directions) -- units are in (Nm/rad)"
)
parser.add_argument("-dd",
"--disable_damping_in_force_control",
action='store_true',
default=False,
help="Disable damping in force control")
parser.add_argument(
"-dr",
"--disable_reference_resetting",
action='store_true',
default=False,
help=
"The reference signal is reset to actual position to avoid jerks/jumps when interaction parameters are changed. This option allows the user to disable this feature."
)
parser.add_argument(
"-rc",
"--rotations_for_constrained_zeroG",
action='store_true',
default=False,
help=
"Allow arbitrary rotational displacements from the current orientation for constrained zero-G (use only for a stationary reference orientation)"
)
parser.add_argument(
"--timeout",
type=float,
default=None,
help=
"Max time in seconds to complete motion goal before returning. None is interpreted as an infinite timeout."
)
args = parser.parse_args(input_arg[1:])
try:
#rospy.init_node('go_to_joint_angles_in_contact_py')
limb = Limb()
traj = MotionTrajectory(limb=limb)
wpt_opts = MotionWaypointOptions(
max_joint_speed_ratio=args.speed_ratio,
max_joint_accel=args.accel_ratio)
waypoint = MotionWaypoint(options=wpt_opts.to_msg(), limb=limb)
joint_angles = limb.joint_ordered_angles()
waypoint.set_joint_angles(joint_angles=joint_angles)
traj.append_waypoint(waypoint.to_msg())
if len(args.joint_angles) != len(joint_angles):
rospy.logerr('The number of joint_angles must be %d',
len(joint_angles))
return None
waypoint.set_joint_angles(joint_angles=args.joint_angles)
traj.append_waypoint(waypoint.to_msg())
# set the interaction control options in the current configuration
interaction_options = InteractionOptions()
trajectory_options = TrajectoryOptions()
trajectory_options.interaction_control = True
trajectory_options.interpolation_type = args.trajType
interaction_options.set_interaction_control_active(
int2bool(args.interaction_active))
interaction_options.set_K_impedance(args.K_impedance)
interaction_options.set_max_impedance(int2bool(args.max_impedance))
interaction_options.set_interaction_control_mode(
args.interaction_control_mode)
interaction_options.set_in_endpoint_frame(
int2bool(args.in_endpoint_frame))
interaction_options.set_force_command(args.force_command)
interaction_options.set_K_nullspace(args.K_nullspace)
interaction_options.set_endpoint_name(args.endpoint_name)
if len(args.interaction_frame) < 7:
rospy.logerr('The number of elements must be 7!')
elif len(args.interaction_frame) == 7:
quat_sum_square = args.interaction_frame[
3] * args.interaction_frame[3] + args.interaction_frame[
4] * args.interaction_frame[4]
+args.interaction_frame[5] * args.interaction_frame[
5] + args.interaction_frame[6] * args.interaction_frame[6]
if quat_sum_square < 1.0 + 1e-7 and quat_sum_square > 1.0 - 1e-7:
interaction_frame = Pose()
interaction_frame.position.x = args.interaction_frame[0]
interaction_frame.position.y = args.interaction_frame[1]
interaction_frame.position.z = args.interaction_frame[2]
interaction_frame.orientation.w = args.interaction_frame[3]
interaction_frame.orientation.x = args.interaction_frame[4]
interaction_frame.orientation.y = args.interaction_frame[5]
interaction_frame.orientation.z = args.interaction_frame[6]
interaction_options.set_interaction_frame(interaction_frame)
else:
rospy.logerr(
'Invalid input to quaternion! The quaternion must be a unit quaternion!'
)
else:
rospy.logerr('Invalid input to interaction_frame!')
interaction_options.set_disable_damping_in_force_control(
args.disable_damping_in_force_control)
interaction_options.set_disable_reference_resetting(
args.disable_reference_resetting)
interaction_options.set_rotations_for_constrained_zeroG(
args.rotations_for_constrained_zeroG)
trajectory_options.interaction_params = interaction_options.to_msg()
traj.set_trajectory_options(trajectory_options)
result = traj.send_trajectory(timeout=args.timeout)
if result is None:
rospy.logerr('Trajectory FAILED to send!')
return
if result.result:
rospy.loginfo(
'Motion controller successfully finished the trajectory with interaction options set!'
)
return True
else:
rospy.logerr(
'Motion controller failed to complete the trajectory with error %s',
result.errorId)
# print the resultant interaction options
rospy.loginfo('Interaction Options:\n%s', interaction_options.to_msg())
except rospy.ROSInterruptException:
rospy.logerr('Keyboard interrupt detected from the user. %s',
'Exiting before trajectory completion.')
def main():
arg_fmt = argparse.RawDescriptionHelpFormatter
parser = argparse.ArgumentParser(formatter_class=arg_fmt,
description=main.__doc__)
#####
parser.add_argument(
"-p", "--position", type=float,
nargs='+', default=[0, 0, 0],
help="Desired end position: X, Y, Z")
parser.add_argument(
"-o", "--orientation", type=float,
nargs='+',
default=[0.704020578925, 0.710172716916, 0.00244101361829, 0.00194372088834],
help="Orientation as a quaternion (x, y, z, w)")
#####
parser.add_argument(
"-q", "--joint_angles", type=float,
nargs='+', default=[0.0, -0.9, 0.0, 1.8, 0.0, -0.9, 0.0],
help="A list of joint angles, one for each of the 7 joints, J0...J6")
parser.add_argument(
"-s", "--speed_ratio", type=float, default=0.2,
help="A value between 0.001 (slow) and 1.0 (maximum joint velocity)")
parser.add_argument(
"-a", "--accel_ratio", type=float, default=0.05,
help="A value between 0.001 (slow) and 1.0 (maximum joint accel)")
parser.add_argument(
"-t", "--trajType", type=str, default='JOINT',
choices=['JOINT', 'CARTESIAN'],
help="trajectory interpolation type")
parser.add_argument(
"-st", "--interaction_active", type=int, default=1, choices = [0, 1],
help="Activate (1) or Deactivate (0) interaction controller")
parser.add_argument(
"-k", "--K_impedance", type=float,
nargs='+', default=[1300.0, 1300.0, 1300.0, 30.0, 30.0, 30.0],
help="A list of desired stiffnesses, one for each of the 6 directions -- stiffness units are (N/m) for first 3 and (Nm/rad) for second 3 values")
parser.add_argument(
"-m", "--max_impedance", type=int,
nargs='+', default=[1, 1, 1, 1, 1, 1], choices = [0, 1],
help="A list of impedance modulation state, one for each of the 6 directions (a single value can be provided to apply the same value to all the directions) -- 0 for False, 1 for True")
parser.add_argument(
"-md", "--interaction_control_mode", type=int,
nargs='+', default=[1, 1, 1, 1, 1, 1], choices = [1,2,3,4],
help="A list of desired interaction control mode (1: impedance, 2: force, 3: impedance with force limit, 4: force with motion limit), one for each of the 6 directions")
parser.add_argument(
"-fr", "--interaction_frame", type=float,
nargs='+', default=[0, 0, 0, 1, 0, 0, 0],
help="Specify the reference frame for the interaction controller -- first 3 values are positions [m] and last 4 values are orientation in quaternion (w, x, y, z)")
parser.add_argument(
"-ef", "--in_endpoint_frame", action='store_true', default=False,
help="Set the desired reference frame to endpoint frame; otherwise, it is base frame by default")
parser.add_argument(
"-en", "--endpoint_name", type=str, default='right_hand',
help="Set the desired endpoint frame by its name; otherwise, it is right_hand frame by default")
parser.add_argument(
"-f", "--force_command", type=float,
nargs='+', default=[0.0, 0.0, 0.0, 0.0, 0.0, 0.0],
help="A list of desired force commands, one for each of the 6 directions -- in force control mode this is the vector of desired forces/torques to be regulated in (N) and (Nm), in impedance with force limit mode this vector specifies the magnitude of forces/torques (N and Nm) that the command will not exceed")
parser.add_argument(
"-kn", "--K_nullspace", type=float,
nargs='+', default=[5.0, 10.0, 5.0, 10.0, 5.0, 10.0, 5.0],
help="A list of desired nullspace stiffnesses, one for each of the 7 joints (a single value can be provided to apply the same value to all the directions) -- units are in (Nm/rad)")
parser.add_argument(
"-dd", "--disable_damping_in_force_control", action='store_true', default=False,
help="Disable damping in force control")
parser.add_argument(
"-dr", "--disable_reference_resetting", action='store_true', default=False,
help="The reference signal is reset to actual position to avoid jerks/jumps when interaction parameters are changed. This option allows the user to disable this feature.")
parser.add_argument(
"-rc", "--rotations_for_constrained_zeroG", action='store_true', default=False,
help="Allow arbitrary rotational displacements from the current orientation for constrained zero-G (use only for a stationary reference orientation)")
parser.add_argument(
"--timeout", type=float, default=None,
help="Max time in seconds to complete motion goal before returning. None is interpreted as an infinite timeout.")
args = parser.parse_args(rospy.myargv()[1:])
try:
rospy.init_node('path_planner_py')
limb = Limb()
traj = MotionTrajectory(limb = limb)
wpt_opts = MotionWaypointOptions(max_joint_speed_ratio=args.speed_ratio,
max_joint_accel=args.accel_ratio)
waypoint = MotionWaypoint(options = wpt_opts.to_msg(), limb = limb)
# joint_angles = limb.joint_ordered_angles()
# waypoint.set_joint_angles(joint_angles = joint_angles)
# traj.append_waypoint(waypoint.to_msg())
# joint = ik_service_client(poses).values()[::-1] # joint angles from J0 to J6
# if len(joint_angles) != len(joint_angles):
# rospy.logerr('The number of joint_angles must be %d', len(joint_angles))
# return None
# # waypoint.set_joint_angles(joint_angles = args.joint_angles)
# waypoint.set_joint_angles(joint_angles = joint)
#####divide the whole path into three parts: soft begin, uniform motion, soft stop####
final_pos = args.position
# get endpoint state
endpoint_state = limb.tip_state('right_hand')
current_pos = endpoint_state.pose.position
dis = [final_pos[0]-current_pos.x, final_pos[1]-current_pos.y, final_pos[2]-current_pos.z]
uniform_motion = [current_pos.x + dis[0]/5, current_pos.y + dis[1]/5, current_pos.z + dis[2]/5]
soft_stop = [current_pos.x + 4*dis[0]/5, current_pos.y + 4*dis[1]/5, current_pos.z + 4*dis[2]/5]
#######################################################################################
# waypoint = path_planning(uniform_motion, args.orientation, 0.25, 0.01)
# traj.append_waypoint(waypoint.to_msg())
# waypoint = path_planning(soft_stop, args.orientation, 0.25, 0)
# traj.append_waypoint(waypoint.to_msg())
# waypoint = path_planning(final_pos, args.orientation, 0.25, 0.01)
# # joint = path_planning(uniform_motion, args.orientation, 0.2, 0.1) # joint angles from J0 to J6
# # waypoint.set_joint_angles(joint_angles = joint)
# # traj.append_waypoint(waypoint.to_msg())
# # joint = path_planning(soft_stop, args.orientation, 0.2, 0.1) # joint angles from J0 to J6
# # waypoint.set_joint_angles(joint_angles = joint)
# # traj.append_waypoint(waypoint.to_msg())
# # joint = path_planning(final_pos, args.orientation, 0.2, 0.1) # joint angles from J0 to J6
# # waypoint.set_joint_angles(joint_angles = joint)
# traj.append_waypoint(waypoint.to_msg())
###########open traj file
filename = 'traj'
with open(filename, 'r') as f:
lines = f.readlines()
l = len(lines) - 1
wpt_opts = MotionWaypointOptions(max_joint_speed_ratio=0.5,
max_joint_accel=0.01)
waypoint = MotionWaypoint(options = wpt_opts.to_msg(), limb = limb)
for line in lines[1:int(floor(2*l/5))]:
print(line)
jnt_angles = [float(x) for x in line.rstrip().split(',')[1:8]]
waypoint.set_joint_angles(joint_angles = jnt_angles)
traj.append_waypoint(waypoint.to_msg())
wpt_opts = MotionWaypointOptions(max_joint_speed_ratio=0.5,
max_joint_accel=0)
waypoint = MotionWaypoint(options = wpt_opts.to_msg(), limb = limb)
for line in lines[int(floor(2*l/5)):int(floor(3*l/5))]:
print(line)
jnt_angles = [float(x) for x in line.rstrip().split(',')[1:8]]
waypoint.set_joint_angles(joint_angles = jnt_angles)
traj.append_waypoint(waypoint.to_msg())
wpt_opts = MotionWaypointOptions(max_joint_speed_ratio=0.5,
max_joint_accel=0.01)
waypoint = MotionWaypoint(options = wpt_opts.to_msg(), limb = limb)
for line in lines[int(floor(3*l/5)):]:
print(line)
jnt_angles = [float(x) for x in line.rstrip().split(',')[1:8]]
waypoint.set_joint_angles(joint_angles = jnt_angles)
traj.append_waypoint(waypoint.to_msg())
# set the interaction control options in the current configuration
interaction_options = InteractionOptions()
trajectory_options = TrajectoryOptions()
trajectory_options.interaction_control = True
trajectory_options.interpolation_type = args.trajType
interaction_options.set_interaction_control_active(int2bool(args.interaction_active))
interaction_options.set_K_impedance(args.K_impedance)
interaction_options.set_max_impedance(int2bool(args.max_impedance))
interaction_options.set_interaction_control_mode(args.interaction_control_mode)
interaction_options.set_in_endpoint_frame(int2bool(args.in_endpoint_frame))
interaction_options.set_force_command(args.force_command)
interaction_options.set_K_nullspace(args.K_nullspace)
interaction_options.set_endpoint_name(args.endpoint_name)
if len(args.interaction_frame) < 7:
rospy.logerr('The number of elements must be 7!')
elif len(args.interaction_frame) == 7:
quat_sum_square = args.interaction_frame[3]*args.interaction_frame[3] + args.interaction_frame[4]*args.interaction_frame[4]
+ args.interaction_frame[5]*args.interaction_frame[5] + args.interaction_frame[6]*args.interaction_frame[6]
if quat_sum_square < 1.0 + 1e-7 and quat_sum_square > 1.0 - 1e-7:
interaction_frame = Pose()
interaction_frame.position.x = args.interaction_frame[0]
interaction_frame.position.y = args.interaction_frame[1]
interaction_frame.position.z = args.interaction_frame[2]
interaction_frame.orientation.w = args.interaction_frame[3]
interaction_frame.orientation.x = args.interaction_frame[4]
interaction_frame.orientation.y = args.interaction_frame[5]
interaction_frame.orientation.z = args.interaction_frame[6]
interaction_options.set_interaction_frame(interaction_frame)
else:
rospy.logerr('Invalid input to quaternion! The quaternion must be a unit quaternion!')
else:
rospy.logerr('Invalid input to interaction_frame!')
interaction_options.set_disable_damping_in_force_control(args.disable_damping_in_force_control)
interaction_options.set_disable_reference_resetting(args.disable_reference_resetting)
interaction_options.set_rotations_for_constrained_zeroG(args.rotations_for_constrained_zeroG)
trajectory_options.interaction_params = interaction_options.to_msg()
traj.set_trajectory_options(trajectory_options)
result = traj.send_trajectory(timeout=args.timeout)
if result is None:
rospy.logerr('Trajectory FAILED to send!')
return
if result.result:
rospy.loginfo('Motion controller successfully finished the trajectory with interaction options set!')
else:
rospy.logerr('Motion controller failed to complete the trajectory with error %s',
result.errorId)
# print the resultant interaction options
rospy.loginfo('Interaction Options:\n%s', interaction_options.to_msg())
except rospy.ROSInterruptException:
rospy.logerr('Keyboard interrupt detected from the user. %s',
'Exiting before trajectory completion.')
def interaction_joint_trajectory(
limb, joint_angles, trajType, interaction_active,
interaction_control_mode, interaction_frame, speed_ratio, accel_ratio,
K_impedance, max_impedance, in_endpoint_frame, force_command,
K_nullspace, endpoint_name, timeout, disable_damping_in_force_control,
disable_reference_resetting, rotations_for_constrained_zeroG):
try:
traj = MotionTrajectory(limb=limb)
wpt_opts = MotionWaypointOptions(max_joint_speed_ratio=speed_ratio,
max_joint_accel=accel_ratio)
waypoint = MotionWaypoint(options=wpt_opts.to_msg(), limb=limb)
# one single waypoint
current_joint_angles = limb.joint_ordered_angles()
waypoint.set_joint_angles(joint_angles=current_joint_angles)
traj.append_waypoint(waypoint.to_msg())
if len(current_joint_angles) != len(joint_angles):
rospy.logerr('The number of joint_angles must be %d',
len(current_joint_angles))
return None
# ----- testing intermediate points with real robot
middle_joint_angles = [
(current_joint_angles[i] + joint_angles[i]) / 2.0
for i in xrange(len(current_joint_angles))
]
waypoint.set_joint_angles(joint_angles=middle_joint_angles)
traj.append_waypoint(waypoint.to_msg())
waypoint.set_joint_angles(joint_angles=joint_angles)
traj.append_waypoint(waypoint.to_msg())
# ----- end testing intermediate points with real robot
# set the interaction control options in the current configuration
interaction_options = InteractionOptions()
trajectory_options = TrajectoryOptions()
trajectory_options.interaction_control = True
trajectory_options.interpolation_type = trajType
interaction_options.set_interaction_control_active(
int2bool(interaction_active))
interaction_options.set_K_impedance(K_impedance)
interaction_options.set_max_impedance(int2bool(max_impedance))
interaction_options.set_interaction_control_mode(
interaction_control_mode)
interaction_options.set_in_endpoint_frame(int2bool(in_endpoint_frame))
interaction_options.set_force_command(force_command)
interaction_options.set_K_nullspace(K_nullspace)
interaction_options.set_endpoint_name(endpoint_name)
if len(interaction_frame) < 7:
rospy.logerr('The number of elements must be 7!')
elif len(interaction_frame) == 7:
quat_sum_square = interaction_frame[3] * interaction_frame[
3] + interaction_frame[4] * interaction_frame[
4] + interaction_frame[5] * interaction_frame[
5] + interaction_frame[6] * interaction_frame[6]
if quat_sum_square < 1.0 + 1e-7 and quat_sum_square > 1.0 - 1e-7:
target_interaction_frame = Pose()
target_interaction_frame.position.x = interaction_frame[0]
target_interaction_frame.position.y = interaction_frame[1]
target_interaction_frame.position.z = interaction_frame[2]
target_interaction_frame.orientation.w = interaction_frame[3]
target_interaction_frame.orientation.x = interaction_frame[4]
target_interaction_frame.orientation.y = interaction_frame[5]
target_interaction_frame.orientation.z = interaction_frame[6]
interaction_options.set_interaction_frame(
target_interaction_frame)
else:
rospy.logerr(
'Invalid input to quaternion! The quaternion must be a unit quaternion!'
)
else:
rospy.logerr('Invalid input to interaction_frame!')
interaction_options.set_disable_damping_in_force_control(
disable_damping_in_force_control)
interaction_options.set_disable_reference_resetting(
disable_reference_resetting)
interaction_options.set_rotations_for_constrained_zeroG(
rotations_for_constrained_zeroG)
trajectory_options.interaction_params = interaction_options.to_msg()
traj.set_trajectory_options(trajectory_options)
result = traj.send_trajectory(timeout=timeout)
if result is None:
rospy.logerr('Trajectory FAILED to send!')
return
if result.result:
rospy.loginfo(
'Motion controller successfully finished the trajectory with interaction options set!'
)
else:
rospy.logerr(
'Motion controller failed to complete the trajectory with error %s',
result.errorId)
# print the resultant interaction options
rospy.loginfo('Interaction Options:\n%s', interaction_options.to_msg())
except rospy.ROSInterruptException:
rospy.logerr('Keyboard interrupt detected from the user. %s',
'Exiting before trajectory completion.')