def test_roam_success(self):
hwsim = Hwsim()
rule0 = hwsim.rules.create()
rule0.source = self.bss_radio[0].addresses[0]
rule0.bidirectional = True
rule1 = hwsim.rules.create()
rule1.source = self.bss_radio[1].addresses[0]
rule1.bidirectional = True
wd = IWD()
psk_agent = PSKAgent('*****@*****.**',
('*****@*****.**', 'secret123'))
wd.register_psk_agent(psk_agent)
device = wd.list_devices(1)[0]
# Check that iwd selects BSS 0 first
rule0.signal = -2000
rule1.signal = -2500
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
device.scan()
condition = 'obj.scanning'
wd.wait_for_object_condition(device, condition)
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
ordered_network = device.get_ordered_network('TestFT')
self.assertEqual(ordered_network.type, NetworkType.eap)
self.assertEqual(ordered_network.signal_strength, -2000)
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
self.assertFalse(self.bss_hostapd[0].list_sta())
self.assertFalse(self.bss_hostapd[1].list_sta())
ordered_network.network_object.connect()
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
self.assertTrue(self.bss_hostapd[0].list_sta())
self.assertFalse(self.bss_hostapd[1].list_sta())
testutil.test_iface_operstate(device.name)
testutil.test_ifaces_connected(self.bss_hostapd[0].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
(self.bss_hostapd[1].ifname, device.name))
device.disconnect()
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
ordered_network = device.get_ordered_network('TestFT')
self.assertEqual(ordered_network.type, NetworkType.eap)
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
ordered_network.network_object.connect()
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
self.assertTrue(self.bss_hostapd[0].list_sta())
self.assertFalse(self.bss_hostapd[1].list_sta())
testutil.test_iface_operstate(device.name)
testutil.test_ifaces_connected(self.bss_hostapd[0].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
(self.bss_hostapd[1].ifname, device.name))
# Check that iwd starts transition to BSS 1 in less than 10 seconds.
# The 10 seconds is longer than needed to scan on just two channels
# but short enough that a full scan on the 2.4 + 5.8 bands supported
# by mac80211_hwsim will not finish. If this times out then, but
# device_roam_trigger_cb has happened, it probably means that
# Neighbor Reports are broken.
rule0.signal = -8000
condition = 'obj.state == DeviceState.roaming'
wd.wait_for_object_condition(device, condition)
# Check that iwd is on BSS 1 once out of roaming state and doesn't
# go through 'disconnected', 'autoconnect', 'connecting' in between
from_condition = 'obj.state == DeviceState.roaming'
to_condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_change(device, from_condition, to_condition)
self.assertTrue(self.bss_hostapd[1].list_sta())
testutil.test_iface_operstate(device.name)
testutil.test_ifaces_connected(self.bss_hostapd[1].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
(self.bss_hostapd[0].ifname, device.name))
def test_stop_retry(self):
hwsim = Hwsim()
bss_hostapd = [
HostapdCLI(config='ssid1.conf'),
HostapdCLI(config='ssid2.conf')
]
bss_radio = [hwsim.get_radio('rad0'), hwsim.get_radio('rad1')]
rule0 = hwsim.rules.create()
rule0.source = bss_radio[0].addresses[0]
rule0.bidirectional = True
rule1 = hwsim.rules.create()
rule1.source = bss_radio[1].addresses[0]
rule1.bidirectional = True
# Fill in the neighbor AP tables in both BSSes. By default each
# instance knows only about current BSS, even inside one hostapd
# process.
# Roaming still works without the neighbor AP table but neighbor
# reports have to be disabled in the .conf files
bss0_nr = ''.join(bss_radio[0].addresses[0].split(':')) + \
'8f0000005101060603000000'
bss1_nr = ''.join(bss_radio[1].addresses[0].split(':')) + \
'8f0000005102060603000000'
bss_hostapd[0].set_neighbor(bss_radio[1].addresses[0], 'TestRoamRetry',
bss1_nr)
bss_hostapd[1].set_neighbor(bss_radio[0].addresses[0], 'TestRoamRetry',
bss0_nr)
# Start in the vicinity of BSS 0, check that iwd connects to BSS 0
rule0.signal = -2000
rule1.signal = -5000
wd = IWD()
psk_agent = PSKAgent("secret123")
wd.register_psk_agent(psk_agent)
devices = wd.list_devices(1)
device = devices[0]
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
device.scan()
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
ordered_network = device.get_ordered_network('TestRoamRetry')
self.assertEqual(ordered_network.type, NetworkType.psk)
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
ordered_network.network_object.connect()
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
self.assertTrue(bss_hostapd[0].list_sta())
self.assertFalse(bss_hostapd[1].list_sta())
# Now push the signal below the RSSI threshold and check that iwd
# connects to BSS 1
rule0.signal = -8000
condition = 'obj.state == DeviceState.roaming'
wd.wait_for_object_condition(device, condition)
# Check that iwd is on BSS 1 once out of roaming state and doesn't
# go through 'disconnected', 'autoconnect', 'connecting' in between
from_condition = 'obj.state == DeviceState.roaming'
to_condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_change(device, from_condition, to_condition)
self.assertTrue(bss_hostapd[1].list_sta())
# Now make sure that we don't roam anymore. In order to catch this via
# DeviceState, a suitable roaming target needs to be available. So jack
# up the RSSI of BSS 0 again. The retry interval is 60 seconds, so we
# should have roamed within that timeframe. Wait just a little longer
# to account for the slowness of the autotest environment.
rule0.signal = -2000
condition = 'obj.state == DeviceState.roaming'
self.assertRaises(TimeoutError,
wd.wait_for_object_condition,
device,
condition,
max_wait=70)
device.disconnect()
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
wd.unregister_psk_agent(psk_agent)
rule0.remove()
rule1.remove()
def test_preauth_success(self):
hwsim = Hwsim()
bss_hostapd = [
HostapdCLI(config='eaptls-preauth-1.conf'),
HostapdCLI(config='eaptls-preauth-2.conf')
]
bss_radio = [hwsim.get_radio('rad0'), hwsim.get_radio('rad1')]
rule0 = hwsim.rules.create()
rule0.source = bss_radio[0].addresses[0]
rule0.bidirectional = True
rule1 = hwsim.rules.create()
rule1.source = bss_radio[1].addresses[0]
rule1.bidirectional = True
# Fill in the neighbor AP tables in both BSSes. By default each
# instance knows only about current BSS, even inside one hostapd
# process.
# Roaming still works without the neighbor AP table but neighbor
# reports have to be disabled in the .conf files
bss0_nr = ''.join(bss_radio[0].addresses[0].split(':')) + \
'8f0000005101060603000000'
bss1_nr = ''.join(bss_radio[1].addresses[0].split(':')) + \
'8f0000005102060603000000'
bss_hostapd[0].set_neighbor(bss_radio[1].addresses[0], 'TestPreauth',
bss1_nr)
bss_hostapd[1].set_neighbor(bss_radio[0].addresses[0], 'TestPreauth',
bss0_nr)
# Check that iwd selects BSS 0 first
rule0.signal = -2500
rule1.signal = -6900
wd = IWD(True)
device = wd.list_devices(1)[0]
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
device.scan()
condition = 'obj.scanning'
wd.wait_for_object_condition(device, condition)
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
ordered_network = device.get_ordered_network('TestPreauth')
self.assertEqual(ordered_network.type, NetworkType.eap)
self.assertEqual(ordered_network.signal_strength, -2500)
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
self.assertFalse(bss_hostapd[0].list_sta())
self.assertFalse(bss_hostapd[1].list_sta())
ordered_network.network_object.connect()
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
self.assertTrue(bss_hostapd[0].list_sta())
self.assertFalse(bss_hostapd[1].list_sta())
testutil.test_iface_operstate(device.name)
testutil.test_ifaces_connected(bss_hostapd[0].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
bss_hostapd[1].ifname, device.name)
# Check that iwd starts transition to BSS 1 in less than 15 seconds
rule0.signal = -8000
condition = 'obj.state == DeviceState.roaming'
wd.wait_for_object_condition(device, condition)
# TODO: verify that the PMK from preauthentication was used
# Check that iwd is on BSS 1 once out of roaming state and doesn't
# go through 'disconnected', 'autoconnect', 'connecting' in between
from_condition = 'obj.state == DeviceState.roaming'
to_condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_change(device, from_condition, to_condition)
self.assertTrue(bss_hostapd[1].list_sta())
testutil.test_iface_operstate(device.name)
testutil.test_ifaces_connected(bss_hostapd[1].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
(bss_hostapd[0].ifname, device.name))
device.disconnect()
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
def test_fast_retry(self):
hwsim = Hwsim()
bss_hostapd = [
HostapdCLI(config='ssid1.conf'),
HostapdCLI(config='ssid2.conf')
]
bss_radio = [hwsim.get_radio('rad0'), hwsim.get_radio('rad1')]
rule0 = hwsim.rules.create()
rule0.source = bss_radio[0].addresses[0]
rule0.bidirectional = True
rule1 = hwsim.rules.create()
rule1.source = bss_radio[1].addresses[0]
rule1.bidirectional = True
# Fill in the neighbor AP tables in both BSSes. By default each
# instance knows only about current BSS, even inside one hostapd
# process.
# Roaming still works without the neighbor AP table but neighbor
# reports have to be disabled in the .conf files
bss0_nr = ''.join(bss_radio[0].addresses[0].split(':')) + \
'8f0000005101060603000000'
bss1_nr = ''.join(bss_radio[1].addresses[0].split(':')) + \
'8f0000005102060603000000'
bss_hostapd[0].set_neighbor(bss_radio[1].addresses[0], 'TestRoamRetry',
bss1_nr)
bss_hostapd[1].set_neighbor(bss_radio[0].addresses[0], 'TestRoamRetry',
bss0_nr)
# Start in the vicinity of BSS 0, check that iwd connects to BSS 0
rule0.signal = -2000
rule1.signal = -8500
wd = IWD()
psk_agent = PSKAgent("secret123")
wd.register_psk_agent(psk_agent)
devices = wd.list_devices(1)
device = devices[0]
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
device.scan()
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
ordered_network = device.get_ordered_network('TestRoamRetry')
self.assertEqual(ordered_network.type, NetworkType.psk)
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
ordered_network.network_object.connect()
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
self.assertTrue(bss_hostapd[0].list_sta())
self.assertFalse(bss_hostapd[1].list_sta())
wd.wait(5)
# Now push the signal LOW, wait for iwd to attempt a roam, fail, and
# schedule another attempt for 60 seconds later
rule0.signal = -8000
wd.wait(20)
self.assertEqual(device.state, iwd.DeviceState.connected)
self.assertTrue(bss_hostapd[0].list_sta())
self.assertFalse(bss_hostapd[1].list_sta())
testutil.test_iface_operstate(device.name)
testutil.test_ifaces_connected(bss_hostapd[0].ifname, device.name)
# Assert high signal for BSS 0 again. This clears the way for a faster
# roam attempt on LOW again
rule0.signal = -5000
# Wait a little for signal recognition
wd.wait(1)
# Assert low signal for BSS 0, check that iwd starts transition to BSS 1
# in less than 10 seconds. Because of the neighbor report a scan should
# not be necessary.
rule0.signal = -8000
rule1.signal = -2000
condition = 'obj.state == DeviceState.roaming'
wd.wait_for_object_condition(device, condition, max_wait=10)
# Check that iwd is on BSS 1 once out of roaming state and doesn't
# go through 'disconnected', 'autoconnect', 'connecting' in between
from_condition = 'obj.state == DeviceState.roaming'
to_condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_change(device, from_condition, to_condition)
self.assertTrue(bss_hostapd[1].list_sta())
device.disconnect()
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
wd.unregister_psk_agent(psk_agent)
rule0.remove()
rule1.remove()
def test_roam_success(self):
hwsim = Hwsim()
rule0 = hwsim.rules.create()
rule0.source = self.bss_radio[0].addresses[0]
rule0.bidirectional = True
rule1 = hwsim.rules.create()
rule1.source = self.bss_radio[1].addresses[0]
rule1.bidirectional = True
# Check that iwd selects BSS 0 first
rule0.signal = -2000
rule1.signal = -6900
wd = IWD(True)
psk_agent = PSKAgent("EasilyGuessedPassword")
wd.register_psk_agent(psk_agent)
device = wd.list_devices(1)[0]
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
device.scan()
condition = 'obj.scanning'
wd.wait_for_object_condition(device, condition)
condition = 'not obj.scanning'
wd.wait_for_object_condition(device, condition)
ordered_network = device.get_ordered_network('TestFT')
self.assertEqual(ordered_network.type, NetworkType.psk)
self.assertEqual(ordered_network.signal_strength, -2000)
condition = 'not obj.connected'
wd.wait_for_object_condition(ordered_network.network_object, condition)
self.assertFalse(self.bss_hostapd[0].list_sta())
self.assertFalse(self.bss_hostapd[1].list_sta())
ordered_network.network_object.connect()
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
self.bss_hostapd[0].wait_for_event('AP-STA-CONNECTED %s' % device.address)
# list_sta actually reports any authenticated stations. Due to the
# nature of FT-over-DS IWD should authenticate to all stations with
# the same mobility domain. This means both APs should show our station.
self.assertTrue(self.bss_hostapd[0].list_sta())
self.assertTrue(self.bss_hostapd[1].list_sta())
wd.unregister_psk_agent(psk_agent)
testutil.test_iface_operstate(device.name)
testutil.test_ifaces_connected(self.bss_hostapd[0].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
(self.bss_hostapd[1].ifname, device.name))
# Check that iwd starts transition to BSS 1 in less than 10 seconds.
# The 10 seconds is longer than needed to scan on just two channels
# but short enough that a full scan on the 2.4 + 5.8 bands supported
# by mac80211_hwsim will not finish. If this times out then, but
# device_roam_trigger_cb has happened, it probably means that
# Neighbor Reports are broken.
rule0.signal = -8000
condition = 'obj.state == DeviceState.roaming'
wd.wait_for_object_condition(device, condition)
# Check that iwd is on BSS 1 once out of roaming state and doesn't
# go through 'disconnected', 'autoconnect', 'connecting' in between
from_condition = 'obj.state == DeviceState.roaming'
to_condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_change(device, from_condition, to_condition)
self.assertTrue(self.bss_hostapd[1].list_sta())
testutil.test_iface_operstate(device.name)
testutil.test_ifaces_connected(self.bss_hostapd[1].ifname, device.name)
self.assertRaises(Exception, testutil.test_ifaces_connected,
(self.bss_hostapd[0].ifname, device.name))
