コード例 #1
0
def kepdiffim(infile,
              outfile,
              plotfile,
              imscale,
              colmap,
              filter,
              function,
              cutoff,
              clobber,
              verbose,
              logfile,
              status,
              cmdLine=False):

    # input arguments

    status = 0
    seterr(all="ignore")

    # log the call

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile, hashline, verbose)
    call = 'KEPDIFFIM -- '
    call += 'infile=' + infile + ' '
    call += 'outfile=' + outfile + ' '
    call += 'plotfile=' + plotfile + ' '
    call += 'imscale=' + imscale + ' '
    call += 'colmap=' + colmap + ' '
    filt = 'n'
    if (filter): filt = 'y'
    call += 'filter=' + filt + ' '
    call += 'function=' + function + ' '
    call += 'cutoff=' + str(cutoff) + ' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber=' + overwrite + ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose=' + chatter + ' '
    call += 'logfile=' + logfile
    kepmsg.log(logfile, call + '\n', verbose)

    # start time

    kepmsg.clock('KEPDIFFIM started at: ', logfile, verbose)

    # test log file

    logfile = kepmsg.test(logfile)

    # clobber output file

    if clobber: status = kepio.clobber(outfile, logfile, verbose)
    if kepio.fileexists(outfile):
        message = 'ERROR -- KEPDIFFIM: ' + outfile + ' exists. Use --clobber'
        status = kepmsg.err(logfile, message, verbose)

# reference color map

    if colmap == 'browse':
        status = cmap_plot()

# open TPF FITS file

    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, barytime, status = \
            kepio.readTPF(infile,'TIME',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, tcorr, status = \
            kepio.readTPF(infile,'TIMECORR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, cadno, status = \
            kepio.readTPF(infile,'CADENCENO',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, fluxpixels, status = \
            kepio.readTPF(infile,'FLUX',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, errpixels, status = \
            kepio.readTPF(infile,'FLUX_ERR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, qual, status = \
            kepio.readTPF(infile,'QUALITY',logfile,verbose)

# read mask defintion data from TPF file

    if status == 0:
        maskimg, pixcoord1, pixcoord2, status = kepio.readMaskDefinition(
            infile, logfile, verbose)

# print target data

    if status == 0:
        print('')
        print('      KepID:  %s' % kepid)
        print(' RA (J2000):  %s' % ra)
        print('Dec (J2000): %s' % dec)
        print('     KepMag:  %s' % kepmag)
        print('   SkyGroup:    %2s' % skygroup)
        print('     Season:    %2s' % str(season))
        print('    Channel:    %2s' % channel)
        print('     Module:    %2s' % module)
        print('     Output:     %1s' % output)
        print('')

# how many quality = 0 rows?

    if status == 0:
        npts = 0
        nrows = len(fluxpixels)
        for i in range(nrows):
            if qual[i] == 0 and \
                    numpy.isfinite(barytime[i]) and \
                    numpy.isfinite(fluxpixels[i,ydim*xdim/2]):
                npts += 1
        time = empty((npts))
        timecorr = empty((npts))
        cadenceno = empty((npts))
        quality = empty((npts))
        pixseries = empty((ydim * xdim, npts))
        errseries = empty((ydim * xdim, npts))

# construct output light curves

    if status == 0:
        np = 0
        for i in range(ydim * xdim):
            npts = 0
            for k in range(nrows):
                if qual[k] == 0 and \
                        numpy.isfinite(barytime[k]) and \
                        numpy.isfinite(fluxpixels[k,ydim*xdim/2]):
                    time[npts] = barytime[k]
                    timecorr[npts] = tcorr[k]
                    cadenceno[npts] = cadno[k]
                    quality[npts] = qual[k]
                    pixseries[i, npts] = fluxpixels[k, np]
                    errseries[i, npts] = errpixels[k, np]
                    npts += 1
            np += 1

# define data sampling

    if status == 0 and filter:
        tpf, status = kepio.openfits(infile, 'readonly', logfile, verbose)
    if status == 0 and filter:
        cadence, status = kepkey.cadence(tpf[1], infile, logfile, verbose)
        tr = 1.0 / (cadence / 86400)
        timescale = 1.0 / (cutoff / tr)

# define convolution function

    if status == 0 and filter:
        if function == 'boxcar':
            filtfunc = numpy.ones(numpy.ceil(timescale))
        elif function == 'gauss':
            timescale /= 2
            dx = numpy.ceil(timescale * 10 + 1)
            filtfunc = kepfunc.gauss()
            filtfunc = filtfunc([1.0, dx / 2 - 1.0, timescale],
                                linspace(0, dx - 1, dx))
        elif function == 'sinc':
            dx = numpy.ceil(timescale * 12 + 1)
            fx = linspace(0, dx - 1, dx)
            fx = fx - dx / 2 + 0.5
            fx /= timescale
            filtfunc = numpy.sinc(fx)
        filtfunc /= numpy.sum(filtfunc)

# pad time series at both ends with noise model

    if status == 0 and filter:
        for i in range(ydim * xdim):
            ave, sigma = kepstat.stdev(pixseries[i, :len(filtfunc)])
            padded = numpy.append(kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                        numpy.ones(len(filtfunc)) * sigma), pixseries[i,:])
            ave, sigma = kepstat.stdev(pixseries[i, -len(filtfunc):])
            padded = numpy.append(padded, kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                                numpy.ones(len(filtfunc)) * sigma))

            # convolve data

            if status == 0:
                convolved = convolve(padded, filtfunc, 'same')

# remove padding from the output array

            if status == 0:
                outdata = convolved[len(filtfunc):-len(filtfunc)]

# subtract low frequencies

            if status == 0:
                outmedian = median(outdata)
                pixseries[i, :] = pixseries[i, :] - outdata + outmedian

# sum pixels over cadence

    if status == 0:
        np = 0
        nrows = len(fluxpixels)
        pixsum = zeros((ydim * xdim))
        errsum = zeros((ydim * xdim))
        for i in range(npts):
            if quality[i] == 0:
                pixsum += pixseries[:, i]
                errsum += errseries[:, i]**2
                np += 1
        pixsum /= np
        errsum = sqrt(errsum) / np

# calculate standard deviation pixels

    if status == 0:
        pixvar = zeros((ydim * xdim))
        for i in range(npts):
            if quality[i] == 0:
                pixvar += (pixsum - pixseries[:, i] / errseries[:, i])**2
        pixvar = numpy.sqrt(pixvar)

# median pixel errors

    if status == 0:
        errmed = empty((ydim * xdim))
        for i in range(ydim * xdim):
            errmed[i] = numpy.median(errseries[:, i])

# calculate chi distribution pixels

    if status == 0:
        pixdev = zeros((ydim * xdim))
        for i in range(npts):
            if quality[i] == 0:
                pixdev += ((pixsum - pixseries[:, i]) / pixsum)**2
        pixdev = numpy.sqrt(pixdev)

#        pixdev = numpy.sqrt(pixvar) / errsum #errmed

# image scale and intensity limits

    if status == 0:
        pixsum_pl, zminsum, zmaxsum = kepplot.intScale1D(pixsum, imscale)
        pixvar_pl, zminvar, zmaxvar = kepplot.intScale1D(pixvar, imscale)
        pixdev_pl, zmindev, zmaxdev = kepplot.intScale1D(pixdev, imscale)

# construct output summed image

    if status == 0:
        imgsum = empty((ydim, xdim))
        imgvar = empty((ydim, xdim))
        imgdev = empty((ydim, xdim))
        imgsum_pl = empty((ydim, xdim))
        imgvar_pl = empty((ydim, xdim))
        imgdev_pl = empty((ydim, xdim))
        n = 0
        for i in range(ydim):
            for j in range(xdim):
                imgsum[i, j] = pixsum[n]
                imgvar[i, j] = pixvar[n]
                imgdev[i, j] = pixdev[n]
                imgsum_pl[i, j] = pixsum_pl[n]
                imgvar_pl[i, j] = pixvar_pl[n]
                imgdev_pl[i, j] = pixdev_pl[n]
                n += 1

# construct output file

    if status == 0:
        instruct, status = kepio.openfits(infile, 'readonly', logfile, verbose)
        status = kepkey.history(call, instruct[0], outfile, logfile, verbose)
        hdulist = HDUList(instruct[0])
        hdulist.writeto(outfile)
        status = kepkey.new('EXTNAME', 'FLUX', 'name of extension',
                            instruct[2], outfile, logfile, verbose)
        pyfits.append(outfile, imgsum, instruct[2].header)
        status = kepkey.new('EXTNAME', 'CHI', 'name of extension', instruct[2],
                            outfile, logfile, verbose)
        pyfits.append(outfile, imgvar, instruct[2].header)
        status = kepkey.new('EXTNAME', 'STDDEV', 'name of extension',
                            instruct[2], outfile, logfile, verbose)
        pyfits.append(outfile, imgdev, instruct[2].header)
        status = kepkey.new('EXTNAME', 'APERTURE', 'name of extension',
                            instruct[2], outfile, logfile, verbose)
        pyfits.append(outfile, instruct[2].data, instruct[2].header)
        status = kepio.closefits(instruct, logfile, verbose)

# pixel limits of the subimage

    if status == 0:
        ymin = row
        ymax = ymin + ydim
        xmin = column
        xmax = xmin + xdim

        # plot limits for summed image

        ymin = float(ymin) - 0.5
        ymax = float(ymax) - 0.5
        xmin = float(xmin) - 0.5
        xmax = float(xmax) - 0.5

        # plot style

        try:
            params = {
                'backend': 'png',
                'axes.linewidth': 2.5,
                'axes.labelsize': 24,
                'axes.font': 'sans-serif',
                'axes.fontweight': 'bold',
                'text.fontsize': 12,
                'legend.fontsize': 12,
                'xtick.labelsize': 10,
                'ytick.labelsize': 10
            }
            pylab.rcParams.update(params)
        except:
            'ERROR -- KEPDIFFIM: install latex for scientific plotting'
            status = 1

    if status == 0:
        plotimage(imgsum_pl, imgvar_pl, imgdev_pl, zminsum, zminvar, zmindev,
                  zmaxsum, zmaxvar, zmaxdev, xmin, xmax, ymin, ymax, colmap,
                  plotfile, cmdLine)

# stop time

    kepmsg.clock('KEPDIFFIM ended at: ', logfile, verbose)

    return
コード例 #2
0
def keptrial(infile,
             outfile,
             datacol,
             errcol,
             fmin,
             fmax,
             nfreq,
             method,
             ntrials,
             plot,
             clobber,
             verbose,
             logfile,
             status,
             cmdLine=False):

    # startup parameters

    status = 0
    labelsize = 24
    ticksize = 16
    xsize = 18
    ysize = 6
    lcolor = '#0000ff'
    lwidth = 1.0
    fcolor = '#ffff00'
    falpha = 0.2

    # log the call

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile, hashline, verbose)
    call = 'KEPTRIAL -- '
    call += 'infile=' + infile + ' '
    call += 'outfile=' + outfile + ' '
    call += 'datacol=' + datacol + ' '
    call += 'errcol=' + errcol + ' '
    call += 'fmin=' + str(fmin) + ' '
    call += 'fmax=' + str(fmax) + ' '
    call += 'nfreq=' + str(nfreq) + ' '
    call += 'method=' + method + ' '
    call += 'ntrials=' + str(ntrials) + ' '
    plotit = 'n'
    if (plot): plotit = 'y'
    call += 'plot=' + plotit + ' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber=' + overwrite + ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose=' + chatter + ' '
    call += 'logfile=' + logfile
    kepmsg.log(logfile, call + '\n', verbose)

    # start time

    kepmsg.clock('KEPTRIAL started at', logfile, verbose)

    # test log file

    logfile = kepmsg.test(logfile)

    # clobber output file

    if clobber: status = kepio.clobber(outfile, logfile, verbose)
    if kepio.fileexists(outfile):
        message = 'ERROR -- KEPTRIAL: ' + outfile + ' exists. Use clobber=yes'
        kepmsg.err(logfile, message, verbose)
        status = 1

# open input file

    if status == 0:
        instr, status = kepio.openfits(infile, 'readonly', logfile, verbose)

# fudge non-compliant FITS keywords with no values

    if status == 0:
        instr = kepkey.emptykeys(instr, file, logfile, verbose)

# input data

    if status == 0:
        try:
            barytime = instr[1].data.field('barytime')
        except:
            barytime, status = kepio.readfitscol(infile, instr[1].data, 'time',
                                                 logfile, verbose)
    if status == 0:
        signal, status = kepio.readfitscol(infile, instr[1].data, datacol,
                                           logfile, verbose)
    if status == 0:
        err, status = kepio.readfitscol(infile, instr[1].data, errcol, logfile,
                                        verbose)

# remove infinite data from time series

    if status == 0:
        try:
            nanclean = instr[1].header['NANCLEAN']
        except:
            incols = [barytime, signal, err]
            [barytime, signal, err] = kepstat.removeinfinlc(signal, incols)

# set up plot

    if status == 0:
        plotLatex = True
        try:
            params = {
                'backend': 'png',
                'axes.linewidth': 2.5,
                'axes.labelsize': labelsize,
                'axes.font': 'sans-serif',
                'axes.fontweight': 'bold',
                'text.fontsize': 12,
                'legend.fontsize': 12,
                'xtick.labelsize': ticksize,
                'ytick.labelsize': ticksize
            }
            rcParams.update(params)
        except:
            print('WARNING: install latex for scientific plotting')
            plotLatex = False

# frequency steps and Monte Carlo iterations

    if status == 0:
        deltaf = (fmax - fmin) / nfreq
        freq = []
        pmax = []
        trial = []
        for i in range(ntrials):
            trial.append(i + 1)

            # adjust data within the error bars

            work1 = kepstat.randarray(signal, err)

            # determine FT power
            fr, power = kepfourier.ft(barytime, work1, fmin, fmax, deltaf,
                                      False)

            # determine peak in FT

            pmax.append(-1.0e30)
            for j in range(len(fr)):
                if (power[j] > pmax[-1]):
                    pmax[-1] = power[j]
                    f1 = fr[j]
            freq.append(f1)

            # plot stop-motion histogram

            pylab.ion()
            pylab.figure(1, figsize=[7, 10])
            clf()
            pylab.axes([0.08, 0.08, 0.88, 0.89])
            pylab.gca().xaxis.set_major_formatter(
                pylab.ScalarFormatter(useOffset=False))
            pylab.gca().yaxis.set_major_formatter(
                pylab.ScalarFormatter(useOffset=False))
            n, bins, patches = pylab.hist(freq,
                                          bins=nfreq,
                                          range=[fmin, fmax],
                                          align='mid',
                                          rwidth=1,
                                          ec='#0000ff',
                                          fc='#ffff00',
                                          lw=2)

            # fit normal distribution to histogram

            x = zeros(len(bins))
            for j in range(1, len(bins)):
                x[j] = (bins[j] + bins[j - 1]) / 2
            pinit = numpy.array([float(i), freq[-1], deltaf])
            if i > 3:
                n = array(n, dtype='float32')
                coeffs, errors, covar, sigma, chi2, dof, fit, plotx, ploty, status = \
                    kepfit.leastsquare('gauss',pinit,x[1:],n,None,logfile,verbose)
                fitfunc = kepfunc.gauss()
                f = arange(fmin, fmax, (fmax - fmin) / 100)
                fit = fitfunc(coeffs, f)
                pylab.plot(f, fit, 'r-', linewidth=2)
            if plotLatex:
                xlabel(r'Frequency (d$^{-1}$)', {'color': 'k'})
            else:
                xlabel(r'Frequency (1/d)', {'color': 'k'})
            ylabel('N', {'color': 'k'})
            xlim(fmin, fmax)
            grid()

# render plot

        if plot:
            if cmdLine:
                pylab.show()
            else:
                pylab.ion()
                pylab.plot([])
                pylab.ioff()

# period results

    if status == 0:
        p = 1.0 / coeffs[1]
        perr = p * coeffs[2] / coeffs[1]
        f1 = fmin
        f2 = fmax
        gotbin = False
        for i in range(len(n)):
            if n[i] > 0 and not gotbin:
                f1 = bins[i]
                gotbin = True
        gotbin = False
        for i in range(len(n) - 1, 0, -1):
            if n[i] > 0 and not gotbin:
                f2 = bins[i + 1]
                gotbin = True
        powave, powstdev = kepstat.stdev(pmax)

# print result

    if status == 0:
        print('              best period: %.10f days (%.7f min)' %
              (p, p * 1440.0))
        print('     1-sigma period error: %.10f days (%.7f min)' %
              (perr, perr * 1440.0))
        print('             search range: %.10f - %.10f days  ' %
              (1.0 / fmax, 1.0 / fmin))
        print('    100%% confidence range: %.10f - %.10f days  ' %
              (1.0 / f2, 1.0 / f1))
        #        print '     detection confidence: %.2f sigma' % (powave / powstdev)
        print('         number of trials: %d' % ntrials)
        print(' number of frequency bins: %d' % nfreq)

# history keyword in output file

    if status == 0:
        status = kepkey.history(call, instr[0], outfile, logfile, verbose)

## write output file

    if status == 0:
        col1 = Column(name='TRIAL', format='J', array=trial)
        col2 = Column(name='FREQUENCY', format='E', unit='1/day', array=freq)
        col3 = Column(name='POWER', format='E', array=pmax)
        cols = ColDefs([col1, col2, col3])
        instr.append(new_table(cols))
        try:
            instr[-1].header.update('EXTNAME', 'TRIALS', 'Extension name')
        except:
            status = 1
        try:
            instr[-1].header.update('SEARCHR1', 1.0 / fmax,
                                    'Search range lower bound (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('SEARCHR2', 1.0 / fmin,
                                    'Search range upper bound (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('NFREQ', nfreq, 'Number of frequency bins')
        except:
            status = 1
        try:
            instr[-1].header.update('PERIOD', p, 'Best period (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('PERIODE', perr,
                                    '1-sigma period error (days)')
        except:
            status = 1
#        instr[-1].header.update('DETNCONF',powave/powstdev,'Detection significance (sigma)')
        try:
            instr[-1].header.update('CONFIDR1', 1.0 / f2,
                                    'Trial confidence lower bound (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('CONFIDR2', 1.0 / f1,
                                    'Trial confidence upper bound (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('NTRIALS', ntrials, 'Number of trials')
        except:
            status = 1
        instr.writeto(outfile)

# close input file

    if status == 0:
        status = kepio.closefits(instr, logfile, verbose)

## end time

    if (status == 0):
        message = 'KEPTRAIL completed at'
    else:
        message = '\nKEPTRIAL aborted at'
    kepmsg.clock(message, logfile, verbose)
コード例 #3
0
def keppixseries(infile,
                 outfile,
                 plotfile,
                 plottype,
                 filter,
                 function,
                 cutoff,
                 clobber,
                 verbose,
                 logfile,
                 status,
                 cmdLine=False):

    # input arguments

    status = 0
    seterr(all="ignore")

    # log the call

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile, hashline, verbose)
    call = 'KEPPIXSERIES -- '
    call += 'infile=' + infile + ' '
    call += 'outfile=' + outfile + ' '
    call += 'plotfile=' + plotfile + ' '
    call += 'plottype=' + plottype + ' '
    filt = 'n'
    if (filter): filt = 'y'
    call += 'filter=' + filt + ' '
    call += 'function=' + function + ' '
    call += 'cutoff=' + str(cutoff) + ' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber=' + overwrite + ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose=' + chatter + ' '
    call += 'logfile=' + logfile
    kepmsg.log(logfile, call + '\n', verbose)

    # start time

    kepmsg.clock('KEPPIXSERIES started at', logfile, verbose)

    # test log file

    logfile = kepmsg.test(logfile)

    # clobber output file

    if clobber: status = kepio.clobber(outfile, logfile, verbose)
    if kepio.fileexists(outfile):
        message = 'ERROR -- KEPPIXSERIES: ' + outfile + ' exists. Use --clobber'
        status = kepmsg.err(logfile, message, verbose)

# open TPF FITS file

    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, barytime, status = \
            kepio.readTPF(infile,'TIME',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, tcorr, status = \
            kepio.readTPF(infile,'TIMECORR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, cadno, status = \
            kepio.readTPF(infile,'CADENCENO',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, fluxpixels, status = \
            kepio.readTPF(infile,'FLUX',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, errpixels, status = \
            kepio.readTPF(infile,'FLUX_ERR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, qual, status = \
            kepio.readTPF(infile,'QUALITY',logfile,verbose)

# read mask defintion data from TPF file

    if status == 0:
        maskimg, pixcoord1, pixcoord2, status = kepio.readMaskDefinition(
            infile, logfile, verbose)

# print target data

    if status == 0:
        print ''
        print '      KepID:  %s' % kepid
        print ' RA (J2000):  %s' % ra
        print 'Dec (J2000): %s' % dec
        print '     KepMag:  %s' % kepmag
        print '   SkyGroup:    %2s' % skygroup
        print '     Season:    %2s' % str(season)
        print '    Channel:    %2s' % channel
        print '     Module:    %2s' % module
        print '     Output:     %1s' % output
        print ''

# how many quality = 0 rows?

    if status == 0:
        npts = 0
        nrows = len(fluxpixels)
        for i in range(nrows):
            if qual[i] == 0 and \
                    numpy.isfinite(barytime[i]) and \
                    numpy.isfinite(fluxpixels[i,ydim*xdim/2]):
                npts += 1
        time = empty((npts))
        timecorr = empty((npts))
        cadenceno = empty((npts))
        quality = empty((npts))
        pixseries = empty((ydim, xdim, npts))
        errseries = empty((ydim, xdim, npts))

# construct output light curves

    if status == 0:
        np = 0
        for i in range(ydim):
            for j in range(xdim):
                npts = 0
                for k in range(nrows):
                    if qual[k] == 0 and \
                    numpy.isfinite(barytime[k]) and \
                    numpy.isfinite(fluxpixels[k,ydim*xdim/2]):
                        time[npts] = barytime[k]
                        timecorr[npts] = tcorr[k]
                        cadenceno[npts] = cadno[k]
                        quality[npts] = qual[k]
                        pixseries[i, j, npts] = fluxpixels[k, np]
                        errseries[i, j, npts] = errpixels[k, np]
                        npts += 1
                np += 1

# define data sampling

    if status == 0 and filter:
        tpf, status = kepio.openfits(infile, 'readonly', logfile, verbose)
    if status == 0 and filter:
        cadence, status = kepkey.cadence(tpf[1], infile, logfile, verbose)
        tr = 1.0 / (cadence / 86400)
        timescale = 1.0 / (cutoff / tr)

# define convolution function

    if status == 0 and filter:
        if function == 'boxcar':
            filtfunc = numpy.ones(numpy.ceil(timescale))
        elif function == 'gauss':
            timescale /= 2
            dx = numpy.ceil(timescale * 10 + 1)
            filtfunc = kepfunc.gauss()
            filtfunc = filtfunc([1.0, dx / 2 - 1.0, timescale],
                                linspace(0, dx - 1, dx))
        elif function == 'sinc':
            dx = numpy.ceil(timescale * 12 + 1)
            fx = linspace(0, dx - 1, dx)
            fx = fx - dx / 2 + 0.5
            fx /= timescale
            filtfunc = numpy.sinc(fx)
        filtfunc /= numpy.sum(filtfunc)

# pad time series at both ends with noise model

    if status == 0 and filter:
        for i in range(ydim):
            for j in range(xdim):
                ave, sigma = kepstat.stdev(pixseries[i, j, :len(filtfunc)])
                padded = numpy.append(kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                            numpy.ones(len(filtfunc)) * sigma), pixseries[i,j,:])
                ave, sigma = kepstat.stdev(pixseries[i, j, -len(filtfunc):])
                padded = numpy.append(padded, kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                                    numpy.ones(len(filtfunc)) * sigma))

                # convolve data

                if status == 0:
                    convolved = convolve(padded, filtfunc, 'same')

# remove padding from the output array

                if status == 0:
                    outdata = convolved[len(filtfunc):-len(filtfunc)]

# subtract low frequencies

                if status == 0:
                    outmedian = median(outdata)
                    pixseries[i,
                              j, :] = pixseries[i, j, :] - outdata + outmedian

# construct output file

    if status == 0 and ydim * xdim < 1000:
        instruct, status = kepio.openfits(infile, 'readonly', logfile, verbose)
        status = kepkey.history(call, instruct[0], outfile, logfile, verbose)
        hdulist = HDUList(instruct[0])
        cols = []
        cols.append(
            Column(name='TIME',
                   format='D',
                   unit='BJD - 2454833',
                   disp='D12.7',
                   array=time))
        cols.append(
            Column(name='TIMECORR',
                   format='E',
                   unit='d',
                   disp='E13.6',
                   array=timecorr))
        cols.append(
            Column(name='CADENCENO', format='J', disp='I10', array=cadenceno))
        cols.append(Column(name='QUALITY', format='J', array=quality))
        for i in range(ydim):
            for j in range(xdim):
                colname = 'COL%d_ROW%d' % (i + column, j + row)
                cols.append(
                    Column(name=colname,
                           format='E',
                           disp='E13.6',
                           array=pixseries[i, j, :]))
        hdu1 = new_table(ColDefs(cols))
        try:
            hdu1.header.update('INHERIT', True, 'inherit the primary header')
        except:
            status = 0
        try:
            hdu1.header.update('EXTNAME', 'PIXELSERIES', 'name of extension')
        except:
            status = 0
        try:
            hdu1.header.update(
                'EXTVER', instruct[1].header['EXTVER'],
                'extension version number (not format version)')
        except:
            status = 0
        try:
            hdu1.header.update('TELESCOP', instruct[1].header['TELESCOP'],
                               'telescope')
        except:
            status = 0
        try:
            hdu1.header.update('INSTRUME', instruct[1].header['INSTRUME'],
                               'detector type')
        except:
            status = 0
        try:
            hdu1.header.update('OBJECT', instruct[1].header['OBJECT'],
                               'string version of KEPLERID')
        except:
            status = 0
        try:
            hdu1.header.update('KEPLERID', instruct[1].header['KEPLERID'],
                               'unique Kepler target identifier')
        except:
            status = 0
        try:
            hdu1.header.update('RADESYS', instruct[1].header['RADESYS'],
                               'reference frame of celestial coordinates')
        except:
            status = 0
        try:
            hdu1.header.update('RA_OBJ', instruct[1].header['RA_OBJ'],
                               '[deg] right ascension from KIC')
        except:
            status = 0
        try:
            hdu1.header.update('DEC_OBJ', instruct[1].header['DEC_OBJ'],
                               '[deg] declination from KIC')
        except:
            status = 0
        try:
            hdu1.header.update('EQUINOX', instruct[1].header['EQUINOX'],
                               'equinox of celestial coordinate system')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEREF', instruct[1].header['TIMEREF'],
                               'barycentric correction applied to times')
        except:
            status = 0
        try:
            hdu1.header.update('TASSIGN', instruct[1].header['TASSIGN'],
                               'where time is assigned')
        except:
            status = 0
        try:
            hdu1.header.update('TIMESYS', instruct[1].header['TIMESYS'],
                               'time system is barycentric JD')
        except:
            status = 0
        try:
            hdu1.header.update('BJDREFI', instruct[1].header['BJDREFI'],
                               'integer part of BJD reference date')
        except:
            status = 0
        try:
            hdu1.header.update('BJDREFF', instruct[1].header['BJDREFF'],
                               'fraction of the day in BJD reference date')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEUNIT', instruct[1].header['TIMEUNIT'],
                               'time unit for TIME, TSTART and TSTOP')
        except:
            status = 0
        try:
            hdu1.header.update('TSTART', instruct[1].header['TSTART'],
                               'observation start time in BJD-BJDREF')
        except:
            status = 0
        try:
            hdu1.header.update('TSTOP', instruct[1].header['TSTOP'],
                               'observation stop time in BJD-BJDREF')
        except:
            status = 0
        try:
            hdu1.header.update('LC_START', instruct[1].header['LC_START'],
                               'mid point of first cadence in MJD')
        except:
            status = 0
        try:
            hdu1.header.update('LC_END', instruct[1].header['LC_END'],
                               'mid point of last cadence in MJD')
        except:
            status = 0
        try:
            hdu1.header.update('TELAPSE', instruct[1].header['TELAPSE'],
                               '[d] TSTOP - TSTART')
        except:
            status = 0
        try:
            hdu1.header.update('LIVETIME', instruct[1].header['LIVETIME'],
                               '[d] TELAPSE multiplied by DEADC')
        except:
            status = 0
        try:
            hdu1.header.update('EXPOSURE', instruct[1].header['EXPOSURE'],
                               '[d] time on source')
        except:
            status = 0
        try:
            hdu1.header.update('DEADC', instruct[1].header['DEADC'],
                               'deadtime correction')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEPIXR', instruct[1].header['TIMEPIXR'],
                               'bin time beginning=0 middle=0.5 end=1')
        except:
            status = 0
        try:
            hdu1.header.update('TIERRELA', instruct[1].header['TIERRELA'],
                               '[d] relative time error')
        except:
            status = 0
        try:
            hdu1.header.update('TIERABSO', instruct[1].header['TIERABSO'],
                               '[d] absolute time error')
        except:
            status = 0
        try:
            hdu1.header.update('INT_TIME', instruct[1].header['INT_TIME'],
                               '[s] photon accumulation time per frame')
        except:
            status = 0
        try:
            hdu1.header.update('READTIME', instruct[1].header['READTIME'],
                               '[s] readout time per frame')
        except:
            status = 0
        try:
            hdu1.header.update('FRAMETIM', instruct[1].header['FRAMETIM'],
                               '[s] frame time (INT_TIME + READTIME)')
        except:
            status = 0
        try:
            hdu1.header.update('NUM_FRM', instruct[1].header['NUM_FRM'],
                               'number of frames per time stamp')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEDEL', instruct[1].header['TIMEDEL'],
                               '[d] time resolution of data')
        except:
            status = 0
        try:
            hdu1.header.update('DATE-OBS', instruct[1].header['DATE-OBS'],
                               'TSTART as UTC calendar date')
        except:
            status = 0
        try:
            hdu1.header.update('DATE-END', instruct[1].header['DATE-END'],
                               'TSTOP as UTC calendar date')
        except:
            status = 0
        try:
            hdu1.header.update('BACKAPP', instruct[1].header['BACKAPP'],
                               'background is subtracted')
        except:
            status = 0
        try:
            hdu1.header.update('DEADAPP', instruct[1].header['DEADAPP'],
                               'deadtime applied')
        except:
            status = 0
        try:
            hdu1.header.update('VIGNAPP', instruct[1].header['VIGNAPP'],
                               'vignetting or collimator correction applied')
        except:
            status = 0
        try:
            hdu1.header.update('GAIN', instruct[1].header['GAIN'],
                               '[electrons/count] channel gain')
        except:
            status = 0
        try:
            hdu1.header.update('READNOIS', instruct[1].header['READNOIS'],
                               '[electrons] read noise')
        except:
            status = 0
        try:
            hdu1.header.update('NREADOUT', instruct[1].header['NREADOUT'],
                               'number of read per cadence')
        except:
            status = 0
        try:
            hdu1.header.update('TIMSLICE', instruct[1].header['TIMSLICE'],
                               'time-slice readout sequence section')
        except:
            status = 0
        try:
            hdu1.header.update('MEANBLCK', instruct[1].header['MEANBLCK'],
                               '[count] FSW mean black level')
        except:
            status = 0
        hdulist.append(hdu1)
        hdulist.writeto(outfile)
        status = kepkey.new('EXTNAME', 'APERTURE', 'name of extension',
                            instruct[2], outfile, logfile, verbose)
        pyfits.append(outfile, instruct[2].data, instruct[2].header)
        status = kepio.closefits(instruct, logfile, verbose)
    else:
        message = 'WARNING -- KEPPIXSERIES: output FITS file requires > 999 columns. Non-compliant with FITS convention.'

        kepmsg.warn(logfile, message)

# plot style

    if status == 0:
        try:
            params = {
                'backend': 'png',
                'axes.linewidth': 2.0,
                'axes.labelsize': 32,
                'axes.font': 'sans-serif',
                'axes.fontweight': 'bold',
                'text.fontsize': 8,
                'legend.fontsize': 8,
                'xtick.labelsize': 12,
                'ytick.labelsize': 12
            }
            pylab.rcParams.update(params)
        except:
            pass

# plot pixel array

    fmin = 1.0e33
    fmax = -1.033
    if status == 0:
        pylab.figure(num=None, figsize=[12, 12])
        pylab.clf()
        dx = 0.93 / xdim
        dy = 0.94 / ydim
        ax = pylab.axes([0.06, 0.05, 0.93, 0.94])
        pylab.gca().xaxis.set_major_formatter(
            pylab.ScalarFormatter(useOffset=False))
        pylab.gca().yaxis.set_major_formatter(
            pylab.ScalarFormatter(useOffset=False))
        pylab.gca().xaxis.set_major_locator(
            matplotlib.ticker.MaxNLocator(integer=True))
        pylab.gca().yaxis.set_major_locator(
            matplotlib.ticker.MaxNLocator(integer=True))
        labels = ax.get_yticklabels()
        setp(labels, 'rotation', 90, fontsize=12)
        pylab.xlim(numpy.min(pixcoord1) - 0.5, numpy.max(pixcoord1) + 0.5)
        pylab.ylim(numpy.min(pixcoord2) - 0.5, numpy.max(pixcoord2) + 0.5)
        pylab.xlabel('time', {'color': 'k'})
        pylab.ylabel('arbitrary flux', {'color': 'k'})
        for i in range(ydim):
            for j in range(xdim):
                tmin = amin(time)
                tmax = amax(time)
                try:
                    numpy.isfinite(amin(pixseries[i, j, :]))
                    numpy.isfinite(amin(pixseries[i, j, :]))
                    fmin = amin(pixseries[i, j, :])
                    fmax = amax(pixseries[i, j, :])
                except:
                    ugh = 1
                xmin = tmin - (tmax - tmin) / 40
                xmax = tmax + (tmax - tmin) / 40
                ymin = fmin - (fmax - fmin) / 20
                ymax = fmax + (fmax - fmin) / 20
                if kepstat.bitInBitmap(maskimg[i, j], 2):
                    pylab.axes([0.06 + float(j) * dx, 0.05 + i * dy, dx, dy],
                               axisbg='lightslategray')
                elif maskimg[i, j] == 0:
                    pylab.axes([0.06 + float(j) * dx, 0.05 + i * dy, dx, dy],
                               axisbg='black')
                else:
                    pylab.axes([0.06 + float(j) * dx, 0.05 + i * dy, dx, dy])
                if j == int(xdim / 2) and i == 0:
                    pylab.setp(pylab.gca(), xticklabels=[], yticklabels=[])
                elif j == 0 and i == int(ydim / 2):
                    pylab.setp(pylab.gca(), xticklabels=[], yticklabels=[])
                else:
                    pylab.setp(pylab.gca(), xticklabels=[], yticklabels=[])
                ptime = time * 1.0
                ptime = numpy.insert(ptime, [0], ptime[0])
                ptime = numpy.append(ptime, ptime[-1])
                pflux = pixseries[i, j, :] * 1.0
                pflux = numpy.insert(pflux, [0], -1000.0)
                pflux = numpy.append(pflux, -1000.0)
                pylab.plot(time,
                           pixseries[i, j, :],
                           color='#0000ff',
                           linestyle='-',
                           linewidth=0.5)
                if not kepstat.bitInBitmap(maskimg[i, j], 2):
                    pylab.fill(ptime,
                               pflux,
                               fc='lightslategray',
                               linewidth=0.0,
                               alpha=1.0)
                pylab.fill(ptime,
                           pflux,
                           fc='#FFF380',
                           linewidth=0.0,
                           alpha=1.0)
                if 'loc' in plottype:
                    pylab.xlim(xmin, xmax)
                    pylab.ylim(ymin, ymax)
                if 'glob' in plottype:
                    pylab.xlim(xmin, xmax)
                    pylab.ylim(1.0e-10, numpy.nanmax(pixseries) * 1.05)
                if 'full' in plottype:
                    pylab.xlim(xmin, xmax)
                    pylab.ylim(1.0e-10, ymax * 1.05)

# render plot

        if cmdLine:
            pylab.show()
        else:
            pylab.ion()
            pylab.plot([])
            pylab.ioff()
        if plotfile.lower() != 'none':
            pylab.savefig(plotfile)

# stop time

    if status == 0:
        kepmsg.clock('KEPPIXSERIES ended at', logfile, verbose)

    return
コード例 #4
0
ファイル: keppixseries.py プロジェクト: KeplerGO/PyKE
def keppixseries(infile,outfile,plotfile,plottype,filter,function,cutoff,clobber,verbose,logfile,status, cmdLine=False): 

# input arguments

    status = 0
    seterr(all="ignore") 

# log the call 

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile,hashline,verbose)
    call = 'KEPPIXSERIES -- '
    call += 'infile='+infile+' '
    call += 'outfile='+outfile+' '
    call += 'plotfile='+plotfile+' '
    call += 'plottype='+plottype+' '
    filt = 'n'
    if (filter): filt = 'y'
    call += 'filter='+filt+ ' '
    call += 'function='+function+' '
    call += 'cutoff='+str(cutoff)+' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber='+overwrite+ ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose='+chatter+' '
    call += 'logfile='+logfile
    kepmsg.log(logfile,call+'\n',verbose)

# start time

    kepmsg.clock('KEPPIXSERIES started at',logfile,verbose)

# test log file

    logfile = kepmsg.test(logfile)

# clobber output file

    if clobber: status = kepio.clobber(outfile,logfile,verbose)
    if kepio.fileexists(outfile): 
        message = 'ERROR -- KEPPIXSERIES: ' + outfile + ' exists. Use --clobber'
        status = kepmsg.err(logfile,message,verbose)

# open TPF FITS file

    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, barytime, status = \
            kepio.readTPF(infile,'TIME',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, tcorr, status = \
            kepio.readTPF(infile,'TIMECORR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, cadno, status = \
            kepio.readTPF(infile,'CADENCENO',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, fluxpixels, status = \
            kepio.readTPF(infile,'FLUX',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, errpixels, status = \
            kepio.readTPF(infile,'FLUX_ERR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, qual, status = \
            kepio.readTPF(infile,'QUALITY',logfile,verbose)

# read mask defintion data from TPF file

    if status == 0:
        maskimg, pixcoord1, pixcoord2, status = kepio.readMaskDefinition(infile,logfile,verbose)

# print target data

    if status == 0:
        print ''
        print '      KepID:  %s' % kepid
        print ' RA (J2000):  %s' % ra
        print 'Dec (J2000): %s' % dec
        print '     KepMag:  %s' % kepmag
        print '   SkyGroup:    %2s' % skygroup
        print '     Season:    %2s' % str(season)
        print '    Channel:    %2s' % channel
        print '     Module:    %2s' % module
        print '     Output:     %1s' % output
        print ''

# how many quality = 0 rows?

    if status == 0:
        npts = 0
        nrows = len(fluxpixels)
        for i in range(nrows):
            if qual[i] == 0 and \
                    numpy.isfinite(barytime[i]) and \
                    numpy.isfinite(fluxpixels[i,ydim*xdim/2]):
                npts += 1
        time = empty((npts))
        timecorr = empty((npts))
        cadenceno = empty((npts))
        quality = empty((npts))
        pixseries = empty((ydim,xdim,npts))
        errseries = empty((ydim,xdim,npts))

# construct output light curves

    if status == 0:
        np = 0
        for i in range(ydim):
            for j in range(xdim):
                npts = 0
                for k in range(nrows):
                    if qual[k] == 0 and \
                    numpy.isfinite(barytime[k]) and \
                    numpy.isfinite(fluxpixels[k,ydim*xdim/2]):
                        time[npts] = barytime[k]
                        timecorr[npts] = tcorr[k]
                        cadenceno[npts] = cadno[k]
                        quality[npts] = qual[k]
                        pixseries[i,j,npts] = fluxpixels[k,np]
                        errseries[i,j,npts] = errpixels[k,np]
                        npts += 1
                np += 1

# define data sampling

    if status == 0 and filter:
        tpf, status = kepio.openfits(infile,'readonly',logfile,verbose)
    if status == 0 and filter:
        cadence, status = kepkey.cadence(tpf[1],infile,logfile,verbose)     
        tr = 1.0 / (cadence / 86400)
        timescale = 1.0 / (cutoff / tr)

# define convolution function

    if status == 0 and filter:
        if function == 'boxcar':
            filtfunc = numpy.ones(numpy.ceil(timescale))
        elif function == 'gauss':
            timescale /= 2
            dx = numpy.ceil(timescale * 10 + 1)
            filtfunc = kepfunc.gauss()
            filtfunc = filtfunc([1.0,dx/2-1.0,timescale],linspace(0,dx-1,dx))
        elif function == 'sinc':
            dx = numpy.ceil(timescale * 12 + 1)
            fx = linspace(0,dx-1,dx)
            fx = fx - dx / 2 + 0.5
            fx /= timescale
            filtfunc = numpy.sinc(fx)
        filtfunc /= numpy.sum(filtfunc)

# pad time series at both ends with noise model

    if status == 0 and filter:
        for i in range(ydim):
            for j in range(xdim):
                ave, sigma  = kepstat.stdev(pixseries[i,j,:len(filtfunc)])
                padded = numpy.append(kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                            numpy.ones(len(filtfunc)) * sigma), pixseries[i,j,:])
                ave, sigma  = kepstat.stdev(pixseries[i,j,-len(filtfunc):])
                padded = numpy.append(padded, kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                                    numpy.ones(len(filtfunc)) * sigma))

# convolve data

                if status == 0:
                    convolved = convolve(padded,filtfunc,'same')

# remove padding from the output array

                if status == 0:
                    outdata = convolved[len(filtfunc):-len(filtfunc)]
            
# subtract low frequencies

                if status == 0:
                    outmedian = median(outdata)
                    pixseries[i,j,:] = pixseries[i,j,:] - outdata + outmedian

# construct output file

    if status == 0 and ydim*xdim < 1000:
        instruct, status = kepio.openfits(infile,'readonly',logfile,verbose)
        status = kepkey.history(call,instruct[0],outfile,logfile,verbose)
        hdulist = HDUList(instruct[0])
        cols = []
        cols.append(Column(name='TIME',format='D',unit='BJD - 2454833',disp='D12.7',array=time))
        cols.append(Column(name='TIMECORR',format='E',unit='d',disp='E13.6',array=timecorr))
        cols.append(Column(name='CADENCENO',format='J',disp='I10',array=cadenceno))
        cols.append(Column(name='QUALITY',format='J',array=quality))
        for i in range(ydim):
            for j in range(xdim):
                colname = 'COL%d_ROW%d' % (i+column,j+row)
                cols.append(Column(name=colname,format='E',disp='E13.6',array=pixseries[i,j,:]))
        hdu1 = new_table(ColDefs(cols))
        try:
            hdu1.header.update('INHERIT',True,'inherit the primary header')
        except:
            status = 0
        try:
            hdu1.header.update('EXTNAME','PIXELSERIES','name of extension')
        except:
            status = 0
        try:
            hdu1.header.update('EXTVER',instruct[1].header['EXTVER'],'extension version number (not format version)')
        except:
            status = 0
        try:
            hdu1.header.update('TELESCOP',instruct[1].header['TELESCOP'],'telescope')
        except:
            status = 0
        try:
            hdu1.header.update('INSTRUME',instruct[1].header['INSTRUME'],'detector type')
        except:
            status = 0
        try:
            hdu1.header.update('OBJECT',instruct[1].header['OBJECT'],'string version of KEPLERID')
        except:
            status = 0
        try:
            hdu1.header.update('KEPLERID',instruct[1].header['KEPLERID'],'unique Kepler target identifier')
        except:
            status = 0
        try:
            hdu1.header.update('RADESYS',instruct[1].header['RADESYS'],'reference frame of celestial coordinates')
        except:
            status = 0
        try:
            hdu1.header.update('RA_OBJ',instruct[1].header['RA_OBJ'],'[deg] right ascension from KIC')
        except:
            status = 0
        try:
            hdu1.header.update('DEC_OBJ',instruct[1].header['DEC_OBJ'],'[deg] declination from KIC')
        except:
            status = 0
        try:
            hdu1.header.update('EQUINOX',instruct[1].header['EQUINOX'],'equinox of celestial coordinate system')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEREF',instruct[1].header['TIMEREF'],'barycentric correction applied to times')
        except:
            status = 0
        try:
            hdu1.header.update('TASSIGN',instruct[1].header['TASSIGN'],'where time is assigned')
        except:
            status = 0
        try:
            hdu1.header.update('TIMESYS',instruct[1].header['TIMESYS'],'time system is barycentric JD')
        except:
            status = 0
        try:
            hdu1.header.update('BJDREFI',instruct[1].header['BJDREFI'],'integer part of BJD reference date')
        except:
            status = 0
        try:
            hdu1.header.update('BJDREFF',instruct[1].header['BJDREFF'],'fraction of the day in BJD reference date')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEUNIT',instruct[1].header['TIMEUNIT'],'time unit for TIME, TSTART and TSTOP')
        except:
            status = 0
        try:
            hdu1.header.update('TSTART',instruct[1].header['TSTART'],'observation start time in BJD-BJDREF')
        except:
            status = 0
        try:
            hdu1.header.update('TSTOP',instruct[1].header['TSTOP'],'observation stop time in BJD-BJDREF')
        except:
            status = 0
        try:
            hdu1.header.update('LC_START',instruct[1].header['LC_START'],'mid point of first cadence in MJD')
        except:
            status = 0
        try:
            hdu1.header.update('LC_END',instruct[1].header['LC_END'],'mid point of last cadence in MJD')
        except:
            status = 0
        try:
            hdu1.header.update('TELAPSE',instruct[1].header['TELAPSE'],'[d] TSTOP - TSTART')
        except:
            status = 0
        try:
            hdu1.header.update('LIVETIME',instruct[1].header['LIVETIME'],'[d] TELAPSE multiplied by DEADC')
        except:
            status = 0
        try:
            hdu1.header.update('EXPOSURE',instruct[1].header['EXPOSURE'],'[d] time on source')
        except:
            status = 0
        try:
            hdu1.header.update('DEADC',instruct[1].header['DEADC'],'deadtime correction')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEPIXR',instruct[1].header['TIMEPIXR'],'bin time beginning=0 middle=0.5 end=1')
        except:
            status = 0
        try:
            hdu1.header.update('TIERRELA',instruct[1].header['TIERRELA'],'[d] relative time error')
        except:
            status = 0
        try:
            hdu1.header.update('TIERABSO',instruct[1].header['TIERABSO'],'[d] absolute time error')
        except:
            status = 0
        try:
            hdu1.header.update('INT_TIME',instruct[1].header['INT_TIME'],'[s] photon accumulation time per frame')
        except:
            status = 0
        try:
            hdu1.header.update('READTIME',instruct[1].header['READTIME'],'[s] readout time per frame')
        except:
            status = 0
        try:
            hdu1.header.update('FRAMETIM',instruct[1].header['FRAMETIM'],'[s] frame time (INT_TIME + READTIME)')
        except:
            status = 0
        try:
            hdu1.header.update('NUM_FRM',instruct[1].header['NUM_FRM'],'number of frames per time stamp')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEDEL',instruct[1].header['TIMEDEL'],'[d] time resolution of data')
        except:
            status = 0
        try:
            hdu1.header.update('DATE-OBS',instruct[1].header['DATE-OBS'],'TSTART as UTC calendar date')
        except:
            status = 0
        try:
            hdu1.header.update('DATE-END',instruct[1].header['DATE-END'],'TSTOP as UTC calendar date')
        except:
            status = 0
        try:
            hdu1.header.update('BACKAPP',instruct[1].header['BACKAPP'],'background is subtracted')
        except:
            status = 0
        try:
            hdu1.header.update('DEADAPP',instruct[1].header['DEADAPP'],'deadtime applied')
        except:
            status = 0
        try:
            hdu1.header.update('VIGNAPP',instruct[1].header['VIGNAPP'],'vignetting or collimator correction applied')
        except:
            status = 0
        try:
            hdu1.header.update('GAIN',instruct[1].header['GAIN'],'[electrons/count] channel gain')
        except:
            status = 0
        try:
            hdu1.header.update('READNOIS',instruct[1].header['READNOIS'],'[electrons] read noise')
        except:
            status = 0
        try:
            hdu1.header.update('NREADOUT',instruct[1].header['NREADOUT'],'number of read per cadence')
        except:
            status = 0
        try:
            hdu1.header.update('TIMSLICE',instruct[1].header['TIMSLICE'],'time-slice readout sequence section')
        except:
            status = 0
        try:
            hdu1.header.update('MEANBLCK',instruct[1].header['MEANBLCK'],'[count] FSW mean black level')
        except:
            status = 0
        hdulist.append(hdu1)
        hdulist.writeto(outfile)
        status = kepkey.new('EXTNAME','APERTURE','name of extension',instruct[2],outfile,logfile,verbose)
        pyfits.append(outfile,instruct[2].data,instruct[2].header)
        status = kepio.closefits(instruct,logfile,verbose)
    else:
        message = 'WARNING -- KEPPIXSERIES: output FITS file requires > 999 columns. Non-compliant with FITS convention.'

        kepmsg.warn(logfile,message)

# plot style

    if status == 0:
        try:
            params = {'backend': 'png',
                      'axes.linewidth': 2.0,
                      'axes.labelsize': 32,
                      'axes.font': 'sans-serif',
                      'axes.fontweight' : 'bold',
                      'text.fontsize': 8,
                      'legend.fontsize': 8,
                      'xtick.labelsize': 12,
                      'ytick.labelsize': 12}
            pylab.rcParams.update(params)
        except:
            pass

# plot pixel array

    fmin = 1.0e33
    fmax = -1.033
    if status == 0:
	pylab.figure(num=None,figsize=[12,12])
        pylab.clf()
        dx = 0.93 / xdim
        dy = 0.94 / ydim
        ax = pylab.axes([0.06,0.05,0.93,0.94])
        pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
        pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
        pylab.gca().xaxis.set_major_locator(matplotlib.ticker.MaxNLocator(integer=True))
        pylab.gca().yaxis.set_major_locator(matplotlib.ticker.MaxNLocator(integer=True))
        labels = ax.get_yticklabels()
        setp(labels, 'rotation', 90, fontsize=12)
        pylab.xlim(numpy.min(pixcoord1) - 0.5,numpy.max(pixcoord1) + 0.5)
        pylab.ylim(numpy.min(pixcoord2) - 0.5,numpy.max(pixcoord2) + 0.5)
        pylab.xlabel('time', {'color' : 'k'})
        pylab.ylabel('arbitrary flux', {'color' : 'k'})
        for i in range(ydim):
            for j in range(xdim):
                tmin = amin(time)
                tmax = amax(time)
                try:
                    numpy.isfinite(amin(pixseries[i,j,:]))
                    numpy.isfinite(amin(pixseries[i,j,:]))
                    fmin = amin(pixseries[i,j,:])
                    fmax = amax(pixseries[i,j,:])
                except:
                    ugh = 1
                xmin = tmin - (tmax - tmin) / 40
                xmax = tmax + (tmax - tmin) / 40
                ymin = fmin - (fmax - fmin) / 20
                ymax = fmax + (fmax - fmin) / 20
                if kepstat.bitInBitmap(maskimg[i,j],2):
                    pylab.axes([0.06+float(j)*dx,0.05+i*dy,dx,dy],axisbg='lightslategray')
                elif maskimg[i,j] == 0:
                    pylab.axes([0.06+float(j)*dx,0.05+i*dy,dx,dy],axisbg='black')
                else:
                    pylab.axes([0.06+float(j)*dx,0.05+i*dy,dx,dy])
                if j == int(xdim / 2) and i == 0:
                    pylab.setp(pylab.gca(),xticklabels=[],yticklabels=[])
                elif j == 0 and i == int(ydim / 2):
                    pylab.setp(pylab.gca(),xticklabels=[],yticklabels=[])
                else:
                    pylab.setp(pylab.gca(),xticklabels=[],yticklabels=[])
                ptime = time * 1.0
                ptime = numpy.insert(ptime,[0],ptime[0])
                ptime = numpy.append(ptime,ptime[-1])
                pflux = pixseries[i,j,:] * 1.0
                pflux = numpy.insert(pflux,[0],-1000.0)
                pflux = numpy.append(pflux,-1000.0)
                pylab.plot(time,pixseries[i,j,:],color='#0000ff',linestyle='-',linewidth=0.5)
                if not kepstat.bitInBitmap(maskimg[i,j],2):
                    pylab.fill(ptime,pflux,fc='lightslategray',linewidth=0.0,alpha=1.0)
                pylab.fill(ptime,pflux,fc='#FFF380',linewidth=0.0,alpha=1.0)
                if 'loc' in plottype:
                    pylab.xlim(xmin,xmax)
                    pylab.ylim(ymin,ymax)
                if 'glob' in plottype:
                    pylab.xlim(xmin,xmax)
                    pylab.ylim(1.0e-10,numpy.nanmax(pixseries) * 1.05)
                if 'full' in plottype:
                    pylab.xlim(xmin,xmax)
                    pylab.ylim(1.0e-10,ymax * 1.05)

# render plot

        if cmdLine: 
            pylab.show()
        else: 
            pylab.ion()
            pylab.plot([])
            pylab.ioff()	
        if plotfile.lower() != 'none':
            pylab.savefig(plotfile)

# stop time

    if status == 0:
        kepmsg.clock('KEPPIXSERIES ended at',logfile,verbose)

    return
コード例 #5
0
ファイル: keptrial.py プロジェクト: rodluger/PyKE
def keptrial(infile,outfile,datacol,errcol,fmin,fmax,nfreq,method,
             ntrials,plot,clobber,verbose,logfile,status,cmdLine=False): 

# startup parameters

    status = 0
    labelsize = 24
    ticksize = 16
    xsize = 18
    ysize = 6
    lcolor = '#0000ff'
    lwidth = 1.0
    fcolor = '#ffff00'
    falpha = 0.2

# log the call 

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile,hashline,verbose)
    call = 'KEPTRIAL -- '
    call += 'infile='+infile+' '
    call += 'outfile='+outfile+' '
    call += 'datacol='+datacol+' '
    call += 'errcol='+errcol+' '
    call += 'fmin='+str(fmin)+' '
    call += 'fmax='+str(fmax)+' '
    call += 'nfreq='+str(nfreq)+' '
    call += 'method='+method+' '
    call += 'ntrials='+str(ntrials)+' '
    plotit = 'n'
    if (plot): plotit = 'y'
    call += 'plot='+plotit+ ' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber='+overwrite+ ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose='+chatter+' '
    call += 'logfile='+logfile
    kepmsg.log(logfile,call+'\n',verbose)

# start time

    kepmsg.clock('KEPTRIAL started at',logfile,verbose)

# test log file

    logfile = kepmsg.test(logfile)

# clobber output file

    if clobber: status = kepio.clobber(outfile,logfile,verbose)
    if kepio.fileexists(outfile): 
	    message = 'ERROR -- KEPTRIAL: ' + outfile + ' exists. Use clobber=yes'
	    kepmsg.err(logfile,message,verbose)
	    status = 1

# open input file

    if status == 0:
        instr, status = kepio.openfits(infile,'readonly',logfile,verbose)

# fudge non-compliant FITS keywords with no values

    if status == 0:
        instr = kepkey.emptykeys(instr,file,logfile,verbose)

# input data

    if status == 0:
	try:
            barytime = instr[1].data.field('barytime')
	except:
            barytime, status = kepio.readfitscol(infile,instr[1].data,'time',logfile,verbose)
    if status == 0:
        signal, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
    if status == 0:
        err, status = kepio.readfitscol(infile,instr[1].data,errcol,logfile,verbose)

# remove infinite data from time series

    if status == 0:
        try:
            nanclean = instr[1].header['NANCLEAN']
        except:
	    incols = [barytime, signal, err]
	    [barytime, signal, err] = kepstat.removeinfinlc(signal, incols)

# set up plot

    if status == 0:
        plotLatex = True
        try:
            params = {'backend': 'png',
                      'axes.linewidth': 2.5,
                      'axes.labelsize': labelsize,
                      'axes.font': 'sans-serif',
                      'axes.fontweight' : 'bold',
                      'text.fontsize': 12,
                      'legend.fontsize': 12,
                      'xtick.labelsize': ticksize,
                      'ytick.labelsize': ticksize}
            rcParams.update(params)
        except:
            print('WARNING: install latex for scientific plotting')
            plotLatex = False

# frequency steps and Monte Carlo iterations

    if status == 0:
        deltaf = (fmax - fmin) / nfreq
        freq = []; pmax = []; trial = []
        for i in range(ntrials):
            trial.append(i+1)

# adjust data within the error bars

            work1 = kepstat.randarray(signal,err)

# determine FT power
            fr, power = kepfourier.ft(barytime,work1,fmin,fmax,deltaf,False)

# determine peak in FT

            pmax.append(-1.0e30)
            for j in range(len(fr)):
                if (power[j] > pmax[-1]):
                    pmax[-1] = power[j]
                    f1 = fr[j]
            freq.append(f1)

# plot stop-motion histogram

            pylab.ion()
	    pylab.figure(1,figsize=[7,10])
            clf()
	    pylab.axes([0.08,0.08,0.88,0.89])
            pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
            pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
            n,bins,patches = pylab.hist(freq,bins=nfreq,range=[fmin,fmax],
                                        align='mid',rwidth=1,ec='#0000ff',
                                        fc='#ffff00',lw=2)

# fit normal distribution to histogram

            x = zeros(len(bins))
            for j in range(1,len(bins)):
                x[j] = (bins[j] + bins[j-1]) / 2
            pinit = numpy.array([float(i),freq[-1],deltaf])
            if i > 3:
                n = array(n,dtype='float32')
                coeffs, errors, covar, sigma, chi2, dof, fit, plotx, ploty, status = \
                    kepfit.leastsquare('gauss',pinit,x[1:],n,None,logfile,verbose)
                fitfunc = kepfunc.gauss()
                f = arange(fmin,fmax,(fmax-fmin)/100)
                fit = fitfunc(coeffs,f)
                pylab.plot(f,fit,'r-',linewidth=2)
            if plotLatex:
                xlabel(r'Frequency (d$^{-1}$)', {'color' : 'k'})
            else:
                xlabel(r'Frequency (1/d)', {'color' : 'k'})
            ylabel('N', {'color' : 'k'})
            xlim(fmin,fmax)
	    grid()

# render plot

        if plot:
            if cmdLine: 
                pylab.show()
            else: 
                pylab.ion()
                pylab.plot([])
                pylab.ioff()

# period results

    if status == 0:
        p = 1.0 / coeffs[1]
        perr = p * coeffs[2] / coeffs[1]
        f1 = fmin; f2 = fmax
        gotbin = False
        for i in range(len(n)):
            if n[i] > 0 and not gotbin:
                f1 = bins[i]
                gotbin = True
        gotbin = False
        for i in range(len(n)-1,0,-1):
            if n[i] > 0 and not gotbin:
                f2 = bins[i+1]
                gotbin = True
        powave, powstdev = kepstat.stdev(pmax)

# print result

    if status == 0:
        print('              best period: %.10f days (%.7f min)' % (p, p * 1440.0))
        print('     1-sigma period error: %.10f days (%.7f min)' % (perr, perr * 1440.0))
        print('             search range: %.10f - %.10f days  ' % (1.0 / fmax, 1.0 / fmin))
        print('    100%% confidence range: %.10f - %.10f days  ' % (1.0 / f2, 1.0 / f1))
#        print '     detection confidence: %.2f sigma' % (powave / powstdev)
        print('         number of trials: %d' % ntrials)
        print(' number of frequency bins: %d' % nfreq)

# history keyword in output file

    if status == 0:
	    status = kepkey.history(call,instr[0],outfile,logfile,verbose)

## write output file

    if status == 0:
        col1 = Column(name='TRIAL',format='J',array=trial)
        col2 = Column(name='FREQUENCY',format='E',unit='1/day',array=freq)
        col3 = Column(name='POWER',format='E',array=pmax)
        cols = ColDefs([col1,col2,col3])
        instr.append(new_table(cols))
        try:
            instr[-1].header.update('EXTNAME','TRIALS','Extension name')
        except:
            status = 1
        try:
            instr[-1].header.update('SEARCHR1',1.0 / fmax,'Search range lower bound (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('SEARCHR2',1.0 / fmin,'Search range upper bound (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('NFREQ',nfreq,'Number of frequency bins')
        except:
            status = 1
        try:
            instr[-1].header.update('PERIOD',p,'Best period (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('PERIODE',perr,'1-sigma period error (days)')
        except:
            status = 1
#        instr[-1].header.update('DETNCONF',powave/powstdev,'Detection significance (sigma)')
        try:
            instr[-1].header.update('CONFIDR1',1.0 / f2,'Trial confidence lower bound (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('CONFIDR2',1.0 / f1,'Trial confidence upper bound (days)')
        except:
            status = 1
        try:
            instr[-1].header.update('NTRIALS',ntrials,'Number of trials')
        except:
            status = 1
        instr.writeto(outfile)
    
# close input file

    if status == 0:
	    status = kepio.closefits(instr,logfile,verbose)	    

## end time

    if (status == 0):
	    message = 'KEPTRAIL completed at'
    else:
	    message = '\nKEPTRIAL aborted at'
    kepmsg.clock(message,logfile,verbose)
コード例 #6
0
ファイル: kepfilter.py プロジェクト: KeplerGO/PyKE
def kepfilter(infile,outfile,datacol,function,cutoff,passband,plot,plotlab,
              clobber,verbose,logfile,status,cmdLine=False): 

## startup parameters

    status = 0
    numpy.seterr(all="ignore") 
    labelsize = 24
    ticksize = 16
    xsize = 16
    ysize = 6
    lcolor = '#0000ff'
    lwidth = 1.0
    fcolor = '#ffff00'
    falpha = 0.2

## log the call 

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile,hashline,verbose)
    call = 'KEPFILTER -- '
    call += 'infile='+infile+' '
    call += 'outfile='+outfile+' '
    call += 'datacol='+str(datacol)+' '
    call += 'function='+str(function)+' '
    call += 'cutoff='+str(cutoff)+' '
    call += 'passband='+str(passband)+' '
    plotit = 'n'
    if (plot): plotit = 'y'
    call += 'plot='+plotit+ ' '
    call += 'plotlab='+str(plotlab)+' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber='+overwrite+ ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose='+chatter+' '
    call += 'logfile='+logfile
    kepmsg.log(logfile,call+'\n',verbose)

## start time

    kepmsg.clock('KEPFILTER started at',logfile,verbose)

## test log file

    logfile = kepmsg.test(logfile)

## clobber output file

    if clobber: status = kepio.clobber(outfile,logfile,verbose)
    if kepio.fileexists(outfile): 
	    message = 'ERROR -- KEPFILTER: ' + outfile + ' exists. Use clobber=yes'
	    status = kepmsg.err(logfile,message,verbose)

## open input file

    if status == 0:
        instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
        tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr,infile,logfile,verbose,status)
    if status == 0:
        try:
            work = instr[0].header['FILEVER']
            cadenom = 1.0
        except:
            cadenom = cadence

## fudge non-compliant FITS keywords with no values

    if status == 0:
        instr = kepkey.emptykeys(instr,file,logfile,verbose)

## read table structure

    if status == 0:
	table, status = kepio.readfitstab(infile,instr[1],logfile,verbose)

# read time and flux columns

    if status == 0:
        barytime, status = kepio.readtimecol(infile,table,logfile,verbose)
        flux, status = kepio.readsapcol(infile,table,logfile,verbose)

# filter input data table

    if status == 0:
        try:
            nanclean = instr[1].header['NANCLEAN']
        except:
            naxis2 = 0
            for i in range(len(table.field(0))):
                if (numpy.isfinite(barytime[i]) and numpy.isfinite(flux[i]) and flux[i] != 0.0):
                    table[naxis2] = table[i]
                    naxis2 += 1
            instr[1].data = table[:naxis2]
            comment = 'NaN cadences removed from data'
            status = kepkey.new('NANCLEAN',True,comment,instr[1],outfile,logfile,verbose)

## read table columns

    if status == 0:
        intime, status = kepio.readtimecol(infile,instr[1].data,logfile,verbose)
    if status == 0:
	indata, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
    if status == 0:
        intime = intime + bjdref
        indata = indata / cadenom

## define data sampling

    if status == 0:
        tr = 1.0 / (cadence / 86400)
        timescale = 1.0 / (cutoff / tr)

## define convolution function

    if status == 0:
        if function == 'boxcar':
            filtfunc = numpy.ones(numpy.ceil(timescale))
        elif function == 'gauss':
            timescale /= 2
            dx = numpy.ceil(timescale * 10 + 1)
            filtfunc = kepfunc.gauss()
            filtfunc = filtfunc([1.0,dx/2-1.0,timescale],linspace(0,dx-1,dx))
        elif function == 'sinc':
            dx = numpy.ceil(timescale * 12 + 1)
            fx = linspace(0,dx-1,dx)
            fx = fx - dx / 2 + 0.5
            fx /= timescale
            filtfunc = numpy.sinc(fx)
        filtfunc /= numpy.sum(filtfunc)

## pad time series at both ends with noise model

    if status == 0:
        ave, sigma  = kepstat.stdev(indata[:len(filtfunc)])
        padded = append(kepstat.randarray(np.ones(len(filtfunc)) * ave,
                                          np.ones(len(filtfunc)) * sigma), indata)
        ave, sigma  = kepstat.stdev(indata[-len(filtfunc):])
        padded = append(padded, kepstat.randarray(np.ones(len(filtfunc)) * ave,
                                                  np.ones(len(filtfunc)) * sigma))

## convolve data

    if status == 0:
        convolved = convolve(padded,filtfunc,'same')

## remove padding from the output array

    if status == 0:
        if function == 'boxcar':
            outdata = convolved[len(filtfunc):-len(filtfunc)]
        else:
            outdata = convolved[len(filtfunc):-len(filtfunc)]
            

## subtract low frequencies

    if status == 0 and passband == 'high':
        outmedian = median(outdata)
        outdata = indata - outdata + outmedian

## comment keyword in output file

    if status == 0:
        status = kepkey.history(call,instr[0],outfile,logfile,verbose)

## clean up x-axis unit

    if status == 0:
	intime0 = float(int(tstart / 100) * 100.0)
        if intime0 < 2.4e6: intime0 += 2.4e6
	ptime = intime - intime0
	xlab = 'BJD $-$ %d' % intime0

## clean up y-axis units

    if status == 0:
        pout = indata * 1.0
        pout2 = outdata * 1.0
	nrm = len(str(int(numpy.nanmax(pout))))-1
	pout = pout / 10**nrm
	pout2 = pout2 / 10**nrm
	ylab = '10$^%d$ %s' % (nrm, plotlab)

## data limits

	xmin = ptime.min()
	xmax = ptime.max()
	ymin = numpy.nanmin(pout)
	ymax = numpy.nanmax(pout)
	xr = xmax - xmin
	yr = ymax - ymin
        ptime = insert(ptime,[0],[ptime[0]]) 
        ptime = append(ptime,[ptime[-1]])
        pout = insert(pout,[0],[0.0]) 
        pout = append(pout,0.0)
        pout2 = insert(pout2,[0],[0.0]) 
        pout2 = append(pout2,0.0)

## plot light curve

    if status == 0 and plot:
        try:
            params = {'backend': 'png',
                      'axes.linewidth': 2.5,
                      'axes.labelsize': labelsize,
                      'axes.font': 'sans-serif',
                      'axes.fontweight' : 'bold',
                      'text.fontsize': 12,
                      'legend.fontsize': 12,
                      'xtick.labelsize': ticksize,
                      'ytick.labelsize': ticksize}
            rcParams.update(params)
        except:
            print 'ERROR -- KEPFILTER: install latex for scientific plotting'
            status = 1
    if status == 0 and plot:
        pylab.figure(figsize=[xsize,ysize])
        pylab.clf()

## plot filtered data

        ax = pylab.axes([0.06,0.1,0.93,0.87])
        pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
        pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
        labels = ax.get_yticklabels()
        setp(labels, 'rotation', 90, fontsize=12)
        pylab.plot(ptime,pout,color='#ff9900',linestyle='-',linewidth=lwidth)
        fill(ptime,pout,color=fcolor,linewidth=0.0,alpha=falpha)
        if passband == 'low':
            pylab.plot(ptime[1:-1],pout2[1:-1],color=lcolor,linestyle='-',linewidth=lwidth)
        else:
            pylab.plot(ptime,pout2,color=lcolor,linestyle='-',linewidth=lwidth)
            fill(ptime,pout2,color=lcolor,linewidth=0.0,alpha=falpha)
	xlabel(xlab, {'color' : 'k'})
	ylabel(ylab, {'color' : 'k'})
	xlim(xmin-xr*0.01,xmax+xr*0.01)
        if ymin >= 0.0: 
            ylim(ymin-yr*0.01,ymax+yr*0.01)
        else:
            ylim(1.0e-10,ymax+yr*0.01)
        pylab.grid()
        
# render plot

        if cmdLine: 
            pylab.show()
        else: 
            pylab.ion()
            pylab.plot([])
            pylab.ioff()
	
## write output file

    if status == 0:
        for i in range(len(outdata)):
            instr[1].data.field(datacol)[i] = outdata[i]
        instr.writeto(outfile)
    
## close input file

    if status == 0:
        status = kepio.closefits(instr,logfile,verbose)	    

## end time

    if (status == 0):
	    message = 'KEPFILTER completed at'
    else:
	    message = '\nKEPFILTER aborted at'
    kepmsg.clock(message,logfile,verbose)
コード例 #7
0
def kephalophot(infile,
                outfile,
                plotfile,
                plottype,
                filter,
                function,
                cutoff,
                clobber,
                verbose,
                logfile,
                status,
                cmdLine=False):

    # input arguments

    status = 0
    seterr(all="ignore")

    # log the call

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile, hashline, verbose)
    call = 'KEPHALOPHOT -- '
    call += 'infile=' + infile + ' '
    call += 'outfile=' + outfile + ' '
    call += 'plotfile=' + plotfile + ' '
    call += 'plottype=' + plottype + ' '
    filt = 'n'
    if (filter): filt = 'y'
    call += 'filter=' + filt + ' '
    call += 'function=' + function + ' '
    call += 'cutoff=' + str(cutoff) + ' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber=' + overwrite + ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose=' + chatter + ' '
    call += 'logfile=' + logfile
    kepmsg.log(logfile, call + '\n', verbose)

    # start time

    kepmsg.clock('KEPHALOPHOT started at', logfile, verbose)

    # test log file

    logfile = kepmsg.test(logfile)

    # clobber output file

    if clobber: status = kepio.clobber(outfile, logfile, verbose)
    if kepio.fileexists(outfile):
        message = 'ERROR -- KEPHALOPHOT: ' + outfile + ' exists. Use --clobber'
        status = kepmsg.err(logfile, message, verbose)

# open TPF FITS file

    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, barytime, status = \
            kepio.readTPF(infile,'TIME',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, tcorr, status = \
            kepio.readTPF(infile,'TIMECORR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, cadno, status = \
            kepio.readTPF(infile,'CADENCENO',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, fluxpixels, status = \
            kepio.readTPF(infile,'FLUX',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, errpixels, status = \
            kepio.readTPF(infile,'FLUX_ERR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, qual, status = \
            kepio.readTPF(infile,'QUALITY',logfile,verbose)

# read mask defintion data from TPF file

    if status == 0:
        maskimg, pixcoord1, pixcoord2, status = kepio.readMaskDefinition(
            infile, logfile, verbose)

# print target data

    if status == 0:
        print('')
        print('      KepID:  %s' % kepid)
        print(' RA (J2000):  %s' % ra)
        print('Dec (J2000): %s' % dec)
        print('     KepMag:  %s' % kepmag)
        print('   SkyGroup:    %2s' % skygroup)
        print('     Season:    %2s' % str(season))
        print('    Channel:    %2s' % channel)
        print('     Module:    %2s' % module)
        print('     Output:     %1s' % output)
        print('')

# how many quality = 0 rows? how many pixels?

    if status == 0:
        np = ydim * xdim
        nrows = len(fluxpixels)
        npts = 0
        for i in range(nrows):
            if qual[i] < 1e4 and \
                    numpy.isfinite(barytime[i]) and \
                    numpy.isfinite(fluxpixels[i,ydim*xdim/2]):
                npts += 1
        time = empty((npts))
        timecorr = empty((npts))
        cadenceno = empty((npts))
        quality = empty((npts))
        pixseries = zeros((npts, np))
        errseries = zeros((npts, np))
        # pixseries = empty((ydim,xdim,npts))
        # errseries = empty((ydim,xdim,npts))

# construct output light curves

    if status == 0:
        for i in range(np):
            npts = 0
            for j in range(nrows):
                if qual[j] < 1e4 and \
                numpy.isfinite(barytime[j]) and \
                numpy.isfinite(fluxpixels[j,i]):
                    time[npts] = barytime[j]
                    timecorr[npts] = tcorr[j]
                    cadenceno[npts] = cadno[j]
                    quality[npts] = qual[j]
                    pixseries[npts, i] = fluxpixels[j, i]
                    errseries[npts, i] = errpixels[j, i]
                    npts += 1

# define data sampling

    if status == 0 and filter:
        tpf, status = kepio.openfits(infile, 'readonly', logfile, verbose)
    if status == 0 and filter:
        cadence, status = kepkey.cadence(tpf[1], infile, logfile, verbose)
        tr = 1.0 / (cadence / 86400)
        timescale = 1.0 / (cutoff / tr)

# define convolution function

    if status == 0 and filter:
        if function == 'boxcar':
            filtfunc = numpy.ones(numpy.ceil(timescale))
        elif function == 'gauss':
            timescale /= 2
            dx = numpy.ceil(timescale * 10 + 1)
            filtfunc = kepfunc.gauss()
            filtfunc = filtfunc([1.0, dx / 2 - 1.0, timescale],
                                linspace(0, dx - 1, dx))
        elif function == 'sinc':
            dx = numpy.ceil(timescale * 12 + 1)
            fx = linspace(0, dx - 1, dx)
            fx = fx - dx / 2 + 0.5
            fx /= timescale
            filtfunc = numpy.sinc(fx)
        filtfunc /= numpy.sum(filtfunc)

# pad time series at both ends with noise model

    if status == 0 and filter:
        for i in range(ydim):
            for j in range(xdim):
                ave, sigma = kepstat.stdev(pixseries[i, j, :len(filtfunc)])
                padded = numpy.append(kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                            numpy.ones(len(filtfunc)) * sigma), pixseries[i,j,:])
                ave, sigma = kepstat.stdev(pixseries[i, j, -len(filtfunc):])
                padded = numpy.append(padded, kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                                    numpy.ones(len(filtfunc)) * sigma))

                # convolve data

                if status == 0:
                    convolved = convolve(padded, filtfunc, 'same')

# remove padding from the output array

                if status == 0:
                    outdata = convolved[len(filtfunc):-len(filtfunc)]

# subtract low frequencies

                if status == 0:
                    outmedian = median(outdata)
                    pixseries[i,
                              j, :] = pixseries[i, j, :] - outdata + outmedian

# construct weighted time series
    if status == 0:
        wgt = numpy.ones((np, 3))
        twgt = numpy.ones((np, 3))
        wgt /= sum(wgt, axis=0)
        satlvl = 0.8 * numpy.max(numpy.max(pixseries, axis=1))
        brk1 = 9.7257203
        brk2 = 45.
        ind1 = where(time - time[0] < brk1)
        ind2 = where((time - time[0] >= brk1) & (time - time[0] < brk2))
        ind3 = where(time - time[0] >= brk2)
        z = numpy.array([0.0, 0.0, 0.0])
        for i in range(np):
            if max(pixseries[ind1, i].flatten()) > satlvl or max(
                    pixseries[ind1, i].flatten()) <= 100:
                wgt[i, 0] = 0
                z[0] += 1
            if max(pixseries[ind2, i].flatten()) > satlvl or max(
                    pixseries[ind2, i].flatten()) <= 100:
                wgt[i, 1] = 0
                z[1] += 1
            if max(pixseries[ind3, i].flatten()) > satlvl or max(
                    pixseries[ind3, i].flatten()) <= 100:
                wgt[i, 2] = 0
                z[2] += 1
        print(z)
        print(np - z)
        sf1 = numpy.dot(pixseries[ind1, :], wgt[:, 0]).flatten()
        sf2 = numpy.dot(pixseries[ind2, :], wgt[:, 1]).flatten()
        sf3 = numpy.dot(pixseries[ind3, :], wgt[:, 2]).flatten()
        sf1 /= numpy.median(sf1)
        sf2 /= numpy.median(sf2)
        sf3 /= numpy.median(sf3)
        originalflux = numpy.concatenate([sf1, sf2, sf3])

        #        a=numpy.array([0.0,0.0,0.0])
        #        t=0
        #        ca = numpy.array([0.0,0.0,0.0])
        #        ct = 0
        #        sig1 = numpy.std(sf1)
        #        sig2 = numpy.std(sf2)
        #        sig3 = numpy.std(sf3)
        #        while 1:
        #            j = int(numpy.floor(numpy.random.random()*np))
        #            if sum(wgt[j,:]) == 0: continue
        #            if ct == 1000:
        #                print(ca)
        #                if ca[0] < 333 and ca[1] < 333 and ca[2] < 333: break
        #                ca = numpy.array([0.0,0.0,0.0])
        #                ct = 0
        #            t += 1
        #            ct += 1
        #            wgt /= sum(wgt,axis=0)
        #            twgt=copy(wgt)
        #            twgt[j,:]*=numpy.random.normal(1.0,0.05,3)
        #            twgt /= sum(twgt,axis=0)
        #            tsf1 = numpy.dot(pixseries[ind1,:],twgt[:,0]).flatten()
        #            tsf2 = numpy.dot(pixseries[ind2,:],twgt[:,1]).flatten()
        #            tsf3 = numpy.dot(pixseries[ind3,:],twgt[:,2]).flatten()
        #            tsf1 /= numpy.median(tsf1)
        #            tsf2 /= numpy.median(tsf2)
        #            tsf3 /= numpy.median(tsf3)
        #            tsig1 = numpy.std(tsf1)
        #            tsig2 = numpy.std(tsf2)
        #            tsig3 = numpy.std(tsf3)
        #            if tsig1 < sig1:
        #                wgt[:,0] = twgt[:,0]
        #                sig1 = tsig1
        #                a[0] += 1
        #                ca[0] += 1
        #            if tsig2 < sig2:
        #                wgt[:,1] = twgt[:,1]
        #                sig2 = tsig2
        #                a[1] += 1
        #                ca[1] += 1
        #            if tsig3 < sig3:
        #                wgt[:,2] = twgt[:,2]
        #                sig3 = tsig3
        #                a[2] += 1
        #                ca[2] += 1
        #        print(100*a/t)
        #        sf1 = numpy.dot(pixseries[ind1,:],wgt[:,0]).flatten()
        #        sf2 = numpy.dot(pixseries[ind2,:],wgt[:,1]).flatten()
        #        sf3 = numpy.dot(pixseries[ind3,:],wgt[:,2]).flatten()
        #        sf1 /= numpy.median(sf1)
        #        sf2 /= numpy.median(sf2)
        #        sf3 /= numpy.median(sf3)
        #
        #        a=numpy.array([0.0,0.0,0.0])
        #        t=0
        #        ca = numpy.array([0.0,0.0,0.0])
        #        ct = 0
        #        sig1 = sum(numpy.fabs(sf1[1:]-sf1[:-1]))
        #        sig2 = sum(numpy.fabs(sf2[1:]-sf2[:-1]))
        #        sig3 = sum(numpy.fabs(sf3[1:]-sf3[:-1]))
        #        while 1:
        #            j = int(numpy.floor(numpy.random.random()*np))
        #            if sum(wgt[j,:]) == 0: continue
        #            if ct == 1000:
        #                print(ca)
        #                if ca[0] < 167 and ca[1] < 167 and ca[2] < 167: break#
        #                ca = numpy.array([0.0,0.0,0.0])
        #                ct = 0
        #            t += 1
        #            ct += 1
        #            wgt /= sum(wgt,axis=0)
        #            twgt=copy(wgt)
        #            twgt[j,:]*=numpy.random.normal(1.0,0.05,3)
        #            twgt /= sum(twgt,axis=0)
        #            tsf1 = numpy.dot(pixseries[ind1,:],twgt[:,0]).flatten()
        #            tsf2 = numpy.dot(pixseries[ind2,:],twgt[:,1]).flatten()
        #            tsf3 = numpy.dot(pixseries[ind3,:],twgt[:,2]).flatten()
        #            tsf1 /= numpy.median(tsf1)
        #            tsf2 /= numpy.median(tsf2)
        #            tsf3 /= numpy.median(tsf3)
        #            tsig1 = sum(numpy.fabs(tsf1[1:]-tsf1[:-1]))
        #            tsig2 = sum(numpy.fabs(tsf2[1:]-tsf2[:-1]))
        #            tsig3 = sum(numpy.fabs(tsf3[1:]-tsf3[:-1]))
        #            if tsig1 < sig1:
        #                wgt[:,0] = twgt[:,0]
        #                sig1 = tsig1
        #                a[0] += 1
        #                ca[0] += 1
        #            if tsig2 < sig2:
        #                wgt[:,1] = twgt[:,1]
        #                sig2 = tsig2
        #                a[1] += 1
        #                ca[1] += 1
        #            if tsig3 < sig3:
        #                wgt[:,2] = twgt[:,2]
        #                sig3 = tsig3
        #                a[2] += 1
        #                ca[2] += 1
        #        print(100*a/t)
        #        sf1 = numpy.dot(pixseries[ind1,:],wgt[:,0]).flatten()
        #        sf2 = numpy.dot(pixseries[ind2,:],wgt[:,1]).flatten()
        #        sf3 = numpy.dot(pixseries[ind3,:],wgt[:,2]).flatten()
        #        sf1 /= numpy.median(sf1)
        #        sf2 /= numpy.median(sf2)
        #        sf3 /= numpy.median(sf3)

        a = numpy.array([0.0, 0.0, 0.0])
        t = 0
        ca = numpy.array([0.0, 0.0, 0.0])
        ct = 0
        sig1 = sum(numpy.fabs(sf1[2:] - 2 * sf1[1:-1] + sf1[:-2]))
        sig2 = sum(numpy.fabs(sf2[2:] - 2 * sf2[1:-1] + sf2[:-2]))
        sig3 = sum(numpy.fabs(sf3[2:] - 2 * sf3[1:-1] + sf3[:-2]))
        while 1:
            j = int(numpy.floor(numpy.random.random() * np))
            if sum(wgt[j, :]) == 0: continue
            if ct == 1000:
                print(ca)
                if ca[0] < 20 and ca[1] < 20 and ca[2] < 20: break
                if t > 1000000: break
                ca = numpy.array([0.0, 0.0, 0.0])
                ct = 0
            t += 1
            ct += 1
            wgt /= sum(wgt, axis=0)
            twgt = copy(wgt)
            twgt[j, :] *= numpy.random.normal(1.0, 0.05, 3)
            twgt /= sum(twgt, axis=0)
            tsf1 = numpy.dot(pixseries[ind1, :], twgt[:, 0]).flatten()
            tsf2 = numpy.dot(pixseries[ind2, :], twgt[:, 1]).flatten()
            tsf3 = numpy.dot(pixseries[ind3, :], twgt[:, 2]).flatten()
            tsf1 /= numpy.median(tsf1)
            tsf2 /= numpy.median(tsf2)
            tsf3 /= numpy.median(tsf3)
            tsig1 = sum(numpy.fabs(tsf1[2:] - 2 * tsf1[1:-1] + tsf1[:-2]))
            tsig2 = sum(numpy.fabs(tsf2[2:] - 2 * tsf2[1:-1] + tsf2[:-2]))
            tsig3 = sum(numpy.fabs(tsf3[2:] - 2 * tsf3[1:-1] + tsf3[:-2]))
            if tsig1 < sig1:
                wgt[:, 0] = twgt[:, 0]
                sig1 = tsig1
                a[0] += 1
                ca[0] += 1
            if tsig2 < sig2:
                wgt[:, 1] = twgt[:, 1]
                sig2 = tsig2
                a[1] += 1
                ca[1] += 1
            if tsig3 < sig3:
                wgt[:, 2] = twgt[:, 2]
                sig3 = tsig3
                a[2] += 1
                ca[2] += 1
        print(100 * a / t)
        sf1 = numpy.dot(pixseries[ind1, :], wgt[:, 0]).flatten()
        sf2 = numpy.dot(pixseries[ind2, :], wgt[:, 1]).flatten()
        sf3 = numpy.dot(pixseries[ind3, :], wgt[:, 2]).flatten()
        sf1 /= numpy.median(sf1)
        sf2 /= numpy.median(sf2)
        sf3 /= numpy.median(sf3)

        finalflux = numpy.concatenate([sf1, sf2, sf3])

# construct output file

    if status == 0:
        instruct, status = kepio.openfits(infile, 'readonly', logfile, verbose)
        status = kepkey.history(call, instruct[0], outfile, logfile, verbose)
        hdulist = HDUList(instruct[0])
        cols = []
        cols.append(
            Column(name='TIME',
                   format='D',
                   unit='BJD - 2454833',
                   disp='D12.7',
                   array=time))
        cols.append(
            Column(name='TIMECORR',
                   format='E',
                   unit='d',
                   disp='E13.6',
                   array=timecorr))
        cols.append(
            Column(name='CADENCENO', format='J', disp='I10', array=cadenceno))
        cols.append(Column(name='QUALITY', format='J', array=quality))
        cols.append(
            Column(name='ORGFLUX',
                   format='E',
                   disp='E13.6',
                   array=originalflux))
        cols.append(
            Column(name='FLUX', format='E', disp='E13.6', array=finalflux))
        # for i in range(ydim):
        #     for j in range(xdim):
        #         colname = 'COL%d_ROW%d' % (i+column,j+row)
        #         cols.append(Column(name=colname,format='E',disp='E13.6',array=pixseries[i,j,:]))
        hdu1 = new_table(ColDefs(cols))
        try:
            hdu1.header.update('INHERIT', True, 'inherit the primary header')
        except:
            status = 0
        try:
            hdu1.header.update('EXTNAME', 'PIXELSERIES', 'name of extension')
        except:
            status = 0
        try:
            hdu1.header.update(
                'EXTVER', instruct[1].header['EXTVER'],
                'extension version number (not format version)')
        except:
            status = 0
        try:
            hdu1.header.update('TELESCOP', instruct[1].header['TELESCOP'],
                               'telescope')
        except:
            status = 0
        try:
            hdu1.header.update('INSTRUME', instruct[1].header['INSTRUME'],
                               'detector type')
        except:
            status = 0
        try:
            hdu1.header.update('OBJECT', instruct[1].header['OBJECT'],
                               'string version of KEPLERID')
        except:
            status = 0
        try:
            hdu1.header.update('KEPLERID', instruct[1].header['KEPLERID'],
                               'unique Kepler target identifier')
        except:
            status = 0
        try:
            hdu1.header.update('RADESYS', instruct[1].header['RADESYS'],
                               'reference frame of celestial coordinates')
        except:
            status = 0
        try:
            hdu1.header.update('RA_OBJ', instruct[1].header['RA_OBJ'],
                               '[deg] right ascension from KIC')
        except:
            status = 0
        try:
            hdu1.header.update('DEC_OBJ', instruct[1].header['DEC_OBJ'],
                               '[deg] declination from KIC')
        except:
            status = 0
        try:
            hdu1.header.update('EQUINOX', instruct[1].header['EQUINOX'],
                               'equinox of celestial coordinate system')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEREF', instruct[1].header['TIMEREF'],
                               'barycentric correction applied to times')
        except:
            status = 0
        try:
            hdu1.header.update('TASSIGN', instruct[1].header['TASSIGN'],
                               'where time is assigned')
        except:
            status = 0
        try:
            hdu1.header.update('TIMESYS', instruct[1].header['TIMESYS'],
                               'time system is barycentric JD')
        except:
            status = 0
        try:
            hdu1.header.update('BJDREFI', instruct[1].header['BJDREFI'],
                               'integer part of BJD reference date')
        except:
            status = 0
        try:
            hdu1.header.update('BJDREFF', instruct[1].header['BJDREFF'],
                               'fraction of the day in BJD reference date')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEUNIT', instruct[1].header['TIMEUNIT'],
                               'time unit for TIME, TSTART and TSTOP')
        except:
            status = 0
        try:
            hdu1.header.update('TSTART', instruct[1].header['TSTART'],
                               'observation start time in BJD-BJDREF')
        except:
            status = 0
        try:
            hdu1.header.update('TSTOP', instruct[1].header['TSTOP'],
                               'observation stop time in BJD-BJDREF')
        except:
            status = 0
        try:
            hdu1.header.update('LC_START', instruct[1].header['LC_START'],
                               'mid point of first cadence in MJD')
        except:
            status = 0
        try:
            hdu1.header.update('LC_END', instruct[1].header['LC_END'],
                               'mid point of last cadence in MJD')
        except:
            status = 0
        try:
            hdu1.header.update('TELAPSE', instruct[1].header['TELAPSE'],
                               '[d] TSTOP - TSTART')
        except:
            status = 0
        try:
            hdu1.header.update('LIVETIME', instruct[1].header['LIVETIME'],
                               '[d] TELAPSE multiplied by DEADC')
        except:
            status = 0
        try:
            hdu1.header.update('EXPOSURE', instruct[1].header['EXPOSURE'],
                               '[d] time on source')
        except:
            status = 0
        try:
            hdu1.header.update('DEADC', instruct[1].header['DEADC'],
                               'deadtime correction')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEPIXR', instruct[1].header['TIMEPIXR'],
                               'bin time beginning=0 middle=0.5 end=1')
        except:
            status = 0
        try:
            hdu1.header.update('TIERRELA', instruct[1].header['TIERRELA'],
                               '[d] relative time error')
        except:
            status = 0
        try:
            hdu1.header.update('TIERABSO', instruct[1].header['TIERABSO'],
                               '[d] absolute time error')
        except:
            status = 0
        try:
            hdu1.header.update('INT_TIME', instruct[1].header['INT_TIME'],
                               '[s] photon accumulation time per frame')
        except:
            status = 0
        try:
            hdu1.header.update('READTIME', instruct[1].header['READTIME'],
                               '[s] readout time per frame')
        except:
            status = 0
        try:
            hdu1.header.update('FRAMETIM', instruct[1].header['FRAMETIM'],
                               '[s] frame time (INT_TIME + READTIME)')
        except:
            status = 0
        try:
            hdu1.header.update('NUM_FRM', instruct[1].header['NUM_FRM'],
                               'number of frames per time stamp')
        except:
            status = 0
        try:
            hdu1.header.update('TIMEDEL', instruct[1].header['TIMEDEL'],
                               '[d] time resolution of data')
        except:
            status = 0
        try:
            hdu1.header.update('DATE-OBS', instruct[1].header['DATE-OBS'],
                               'TSTART as UTC calendar date')
        except:
            status = 0
        try:
            hdu1.header.update('DATE-END', instruct[1].header['DATE-END'],
                               'TSTOP as UTC calendar date')
        except:
            status = 0
        try:
            hdu1.header.update('BACKAPP', instruct[1].header['BACKAPP'],
                               'background is subtracted')
        except:
            status = 0
        try:
            hdu1.header.update('DEADAPP', instruct[1].header['DEADAPP'],
                               'deadtime applied')
        except:
            status = 0
        try:
            hdu1.header.update('VIGNAPP', instruct[1].header['VIGNAPP'],
                               'vignetting or collimator correction applied')
        except:
            status = 0
        try:
            hdu1.header.update('GAIN', instruct[1].header['GAIN'],
                               '[electrons/count] channel gain')
        except:
            status = 0
        try:
            hdu1.header.update('READNOIS', instruct[1].header['READNOIS'],
                               '[electrons] read noise')
        except:
            status = 0
        try:
            hdu1.header.update('NREADOUT', instruct[1].header['NREADOUT'],
                               'number of read per cadence')
        except:
            status = 0
        try:
            hdu1.header.update('TIMSLICE', instruct[1].header['TIMSLICE'],
                               'time-slice readout sequence section')
        except:
            status = 0
        try:
            hdu1.header.update('MEANBLCK', instruct[1].header['MEANBLCK'],
                               '[count] FSW mean black level')
        except:
            status = 0
        hdulist.append(hdu1)
        hdulist.writeto(outfile)
        status = kepkey.new('EXTNAME', 'APERTURE', 'name of extension',
                            instruct[2], outfile, logfile, verbose)
        pyfits.append(outfile, instruct[2].data, instruct[2].header)
        wgt1 = numpy.reshape(wgt[:, 0], (ydim, xdim))
        wgt2 = numpy.reshape(wgt[:, 1], (ydim, xdim))
        wgt3 = numpy.reshape(wgt[:, 2], (ydim, xdim))
        hdu3 = ImageHDU(data=wgt1, header=instruct[2].header, name='WEIGHTS1')
        hdu4 = ImageHDU(data=wgt2, header=instruct[2].header, name='WEIGHTS2')
        hdu5 = ImageHDU(data=wgt3, header=instruct[2].header, name='WEIGHTS3')
        pyfits.append(outfile, hdu3.data, hdu3.header)
        pyfits.append(outfile, hdu4.data, hdu4.header)
        pyfits.append(outfile, hdu5.data, hdu5.header)
        status = kepio.closefits(instruct, logfile, verbose)
    else:
        message = 'WARNING -- KEPHALOPHOT: output FITS file requires > 999 columns. Non-compliant with FITS convention.'

        kepmsg.warn(logfile, message)

# plot style

    if status == 0:
        try:
            params = {
                'backend': 'png',
                'axes.linewidth': 2.0,
                'axes.labelsize': 32,
                'axes.font': 'sans-serif',
                'axes.fontweight': 'bold',
                'text.fontsize': 8,
                'legend.fontsize': 8,
                'xtick.labelsize': 12,
                'ytick.labelsize': 12
            }
            pylab.rcParams.update(params)
        except:
            pass

# plot pixel array

    fmin = 1.0e33
    fmax = -1.033
    if status == 0:
        pylab.figure(num=None, figsize=[12, 12])
        pylab.clf()
        dx = 0.93  #/ xdim
        dy = 0.94  #/ ydim
        ax = pylab.axes([0.06, 0.05, 0.93, 0.94])
        pylab.gca().xaxis.set_major_formatter(
            pylab.ScalarFormatter(useOffset=False))
        pylab.gca().yaxis.set_major_formatter(
            pylab.ScalarFormatter(useOffset=False))
        pylab.gca().xaxis.set_major_locator(
            matplotlib.ticker.MaxNLocator(integer=True))
        pylab.gca().yaxis.set_major_locator(
            matplotlib.ticker.MaxNLocator(integer=True))
        labels = ax.get_yticklabels()
        setp(labels, 'rotation', 90, fontsize=12)
        pylab.xlim(numpy.min(pixcoord1) - 0.5, numpy.max(pixcoord1) + 0.5)
        pylab.ylim(numpy.min(pixcoord2) - 0.5, numpy.max(pixcoord2) + 0.5)
        pylab.xlabel('time', {'color': 'k'})
        pylab.ylabel('arbitrary flux', {'color': 'k'})
        tmin = amin(time)
        tmax = amax(time)
        try:
            numpy.isfinite(amin(finalflux))
            numpy.isfinite(amin(finalflux))
            fmin = amin(finalflux)
            fmax = amax(finalflux)
        except:
            ugh = 1
        xmin = tmin - (tmax - tmin) / 40
        xmax = tmax + (tmax - tmin) / 40
        ymin = fmin - (fmax - fmin) / 20
        ymax = fmax + (fmax - fmin) / 20
        pylab.axes([0.06, 0.05, dx, dy])
        pylab.setp(pylab.gca(), xticklabels=[], yticklabels=[])
        ptime = time * 1.0
        ptime = numpy.insert(ptime, [0], ptime[0])
        ptime = numpy.append(ptime, ptime[-1])
        pflux = finalflux * 1.0
        pflux = numpy.insert(pflux, [0], -1000.0)
        pflux = numpy.append(pflux, -1000.0)
        pylab.plot(time,
                   finalflux,
                   color='#0000ff',
                   linestyle='-',
                   linewidth=0.5)
        pylab.fill(ptime, pflux, fc='#FFF380', linewidth=0.0, alpha=1.0)
        if 'loc' in plottype:
            pylab.xlim(xmin, xmax)
            pylab.ylim(ymin, ymax)
        if 'glob' in plottype:
            pylab.xlim(xmin, xmax)
            pylab.ylim(1.0e-10, numpy.nanmax(pixseries) * 1.05)
        if 'full' in plottype:
            pylab.xlim(xmin, xmax)
            pylab.ylim(1.0e-10, ymax * 1.05)

# render plot

        if cmdLine:
            pylab.show()
        else:
            pylab.ion()
            pylab.plot([])
            pylab.ioff()
        if plotfile.lower() != 'none':
            pylab.savefig(plotfile)

# stop time

    if status == 0:
        kepmsg.clock('KEPHALOPHOT ended at', logfile, verbose)

    return
コード例 #8
0
ファイル: kepdiffim.py プロジェクト: KeplerGO/PyKE
def kepdiffim(infile,outfile,plotfile,imscale,colmap,filter,function,cutoff,clobber,verbose,logfile,status,cmdLine=False): 

# input arguments

    status = 0
    seterr(all="ignore") 

# log the call 

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile,hashline,verbose)
    call = 'KEPDIFFIM -- '
    call += 'infile='+infile+' '
    call += 'outfile='+outfile+' '
    call += 'plotfile='+plotfile+' '
    call += 'imscale='+imscale+' '
    call += 'colmap='+colmap+' '
    filt = 'n'
    if (filter): filt = 'y'
    call += 'filter='+filt+ ' '
    call += 'function='+function+' '
    call += 'cutoff='+str(cutoff)+' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber='+overwrite+ ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose='+chatter+' '
    call += 'logfile='+logfile
    kepmsg.log(logfile,call+'\n',verbose)

# start time

    kepmsg.clock('KEPDIFFIM started at: ',logfile,verbose)

# test log file

    logfile = kepmsg.test(logfile)

# clobber output file

    if clobber: status = kepio.clobber(outfile,logfile,verbose)
    if kepio.fileexists(outfile): 
        message = 'ERROR -- KEPDIFFIM: ' + outfile + ' exists. Use --clobber'
        status = kepmsg.err(logfile,message,verbose)

# reference color map

    if colmap == 'browse':
        status = cmap_plot()

# open TPF FITS file

    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, barytime, status = \
            kepio.readTPF(infile,'TIME',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, tcorr, status = \
            kepio.readTPF(infile,'TIMECORR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, cadno, status = \
            kepio.readTPF(infile,'CADENCENO',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, fluxpixels, status = \
            kepio.readTPF(infile,'FLUX',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, errpixels, status = \
            kepio.readTPF(infile,'FLUX_ERR',logfile,verbose)
    if status == 0:
        kepid, channel, skygroup, module, output, quarter, season, \
            ra, dec, column, row, kepmag, xdim, ydim, qual, status = \
            kepio.readTPF(infile,'QUALITY',logfile,verbose)

# read mask defintion data from TPF file

    if status == 0:
        maskimg, pixcoord1, pixcoord2, status = kepio.readMaskDefinition(infile,logfile,verbose)

# print target data

    if status == 0:
        print ''
        print '      KepID:  %s' % kepid
        print ' RA (J2000):  %s' % ra
        print 'Dec (J2000): %s' % dec
        print '     KepMag:  %s' % kepmag
        print '   SkyGroup:    %2s' % skygroup
        print '     Season:    %2s' % str(season)
        print '    Channel:    %2s' % channel
        print '     Module:    %2s' % module
        print '     Output:     %1s' % output
        print ''

# how many quality = 0 rows?

    if status == 0:
        npts = 0
        nrows = len(fluxpixels)
        for i in range(nrows):
            if qual[i] == 0 and \
                    numpy.isfinite(barytime[i]) and \
                    numpy.isfinite(fluxpixels[i,ydim*xdim/2]):
                npts += 1
        time = empty((npts))
        timecorr = empty((npts))
        cadenceno = empty((npts))
        quality = empty((npts))
        pixseries = empty((ydim*xdim,npts))
        errseries = empty((ydim*xdim,npts))

# construct output light curves

    if status == 0:
        np = 0
        for i in range(ydim*xdim):
            npts = 0
            for k in range(nrows):
                if qual[k] == 0 and \
                        numpy.isfinite(barytime[k]) and \
                        numpy.isfinite(fluxpixels[k,ydim*xdim/2]):
                    time[npts] = barytime[k]
                    timecorr[npts] = tcorr[k]
                    cadenceno[npts] = cadno[k]
                    quality[npts] = qual[k]
                    pixseries[i,npts] = fluxpixels[k,np]
                    errseries[i,npts] = errpixels[k,np]
                    npts += 1
            np += 1

# define data sampling

    if status == 0 and filter:
        tpf, status = kepio.openfits(infile,'readonly',logfile,verbose)
    if status == 0 and filter:
        cadence, status = kepkey.cadence(tpf[1],infile,logfile,verbose)     
        tr = 1.0 / (cadence / 86400)
        timescale = 1.0 / (cutoff / tr)

# define convolution function

    if status == 0 and filter:
        if function == 'boxcar':
            filtfunc = numpy.ones(numpy.ceil(timescale))
        elif function == 'gauss':
            timescale /= 2
            dx = numpy.ceil(timescale * 10 + 1)
            filtfunc = kepfunc.gauss()
            filtfunc = filtfunc([1.0,dx/2-1.0,timescale],linspace(0,dx-1,dx))
        elif function == 'sinc':
            dx = numpy.ceil(timescale * 12 + 1)
            fx = linspace(0,dx-1,dx)
            fx = fx - dx / 2 + 0.5
            fx /= timescale
            filtfunc = numpy.sinc(fx)
        filtfunc /= numpy.sum(filtfunc)

# pad time series at both ends with noise model

    if status == 0 and filter:
        for i in range(ydim*xdim):
            ave, sigma  = kepstat.stdev(pixseries[i,:len(filtfunc)])
            padded = numpy.append(kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                        numpy.ones(len(filtfunc)) * sigma), pixseries[i,:])
            ave, sigma  = kepstat.stdev(pixseries[i,-len(filtfunc):])
            padded = numpy.append(padded, kepstat.randarray(numpy.ones(len(filtfunc)) * ave, \
                                                                numpy.ones(len(filtfunc)) * sigma))

# convolve data

            if status == 0:
                convolved = convolve(padded,filtfunc,'same')

# remove padding from the output array

            if status == 0:
                outdata = convolved[len(filtfunc):-len(filtfunc)]
                            
# subtract low frequencies

            if status == 0:
                outmedian = median(outdata)
                pixseries[i,:] = pixseries[i,:] - outdata + outmedian

# sum pixels over cadence

    if status == 0:
        np = 0
        nrows = len(fluxpixels)
        pixsum = zeros((ydim*xdim))
        errsum = zeros((ydim*xdim))
        for i in range(npts):
            if quality[i] == 0:
                pixsum += pixseries[:,i]
                errsum += errseries[:,i]**2
                np += 1
        pixsum /= np
        errsum = sqrt(errsum) / np

# calculate standard deviation pixels

    if status == 0:
        pixvar = zeros((ydim*xdim))
        for i in range(npts):
            if quality[i] == 0:
                pixvar += (pixsum - pixseries[:,i] / errseries[:,i])**2 
        pixvar = numpy.sqrt(pixvar)

# median pixel errors

    if status == 0:
        errmed = empty((ydim*xdim))
        for i in range(ydim*xdim):
            errmed[i] = numpy.median(errseries[:,i])

# calculate chi distribution pixels

    if status == 0:
        pixdev = zeros((ydim*xdim))
        for i in range(npts):
            if quality[i] == 0:
                pixdev += ((pixsum - pixseries[:,i]) / pixsum)**2 
        pixdev = numpy.sqrt(pixdev)


#        pixdev = numpy.sqrt(pixvar) / errsum #errmed

# image scale and intensity limits

    if status == 0:
        pixsum_pl, zminsum, zmaxsum = kepplot.intScale1D(pixsum,imscale)
        pixvar_pl, zminvar, zmaxvar = kepplot.intScale1D(pixvar,imscale)
        pixdev_pl, zmindev, zmaxdev = kepplot.intScale1D(pixdev,imscale)

# construct output summed image

    if status == 0:
        imgsum = empty((ydim,xdim))
        imgvar = empty((ydim,xdim))
        imgdev = empty((ydim,xdim))
        imgsum_pl = empty((ydim,xdim))
        imgvar_pl = empty((ydim,xdim))
        imgdev_pl = empty((ydim,xdim))
        n = 0
        for i in range(ydim):
            for j in range(xdim):
                imgsum[i,j] = pixsum[n]
                imgvar[i,j] = pixvar[n]
                imgdev[i,j] = pixdev[n]
                imgsum_pl[i,j] = pixsum_pl[n]
                imgvar_pl[i,j] = pixvar_pl[n]
                imgdev_pl[i,j] = pixdev_pl[n]
                n += 1

# construct output file

    if status == 0:
        instruct, status = kepio.openfits(infile,'readonly',logfile,verbose)
        status = kepkey.history(call,instruct[0],outfile,logfile,verbose)
        hdulist = HDUList(instruct[0])
        hdulist.writeto(outfile)
        status = kepkey.new('EXTNAME','FLUX','name of extension',instruct[2],outfile,logfile,verbose)
        pyfits.append(outfile,imgsum,instruct[2].header)
        status = kepkey.new('EXTNAME','CHI','name of extension',instruct[2],outfile,logfile,verbose)
        pyfits.append(outfile,imgvar,instruct[2].header)
        status = kepkey.new('EXTNAME','STDDEV','name of extension',instruct[2],outfile,logfile,verbose)
        pyfits.append(outfile,imgdev,instruct[2].header)
        status = kepkey.new('EXTNAME','APERTURE','name of extension',instruct[2],outfile,logfile,verbose)
        pyfits.append(outfile,instruct[2].data,instruct[2].header)
        status = kepio.closefits(instruct,logfile,verbose)

# pixel limits of the subimage

    if status == 0:
        ymin = row
        ymax = ymin + ydim
        xmin = column
        xmax = xmin + xdim

# plot limits for summed image

        ymin = float(ymin) - 0.5
        ymax = float(ymax) - 0.5
        xmin = float(xmin) - 0.5
        xmax = float(xmax) - 0.5

# plot style

        try:
            params = {'backend': 'png',
                      'axes.linewidth': 2.5,
                      'axes.labelsize': 24,
                      'axes.font': 'sans-serif',
                      'axes.fontweight' : 'bold',
                      'text.fontsize': 12,
                      'legend.fontsize': 12,
                      'xtick.labelsize': 10,
                      'ytick.labelsize': 10}
            pylab.rcParams.update(params)
        except:
            'ERROR -- KEPDIFFIM: install latex for scientific plotting'
            status = 1

    if status == 0:
        plotimage(imgsum_pl,imgvar_pl,imgdev_pl,zminsum,zminvar,zmindev,
                  zmaxsum,zmaxvar,zmaxdev,xmin,xmax,ymin,ymax,colmap,plotfile,cmdLine)
        
# stop time

    kepmsg.clock('KEPDIFFIM ended at: ',logfile,verbose)

    return
コード例 #9
0
ファイル: kepfilter.py プロジェクト: rodluger/PyKE
def kepfilter(infile,outfile,datacol,function,cutoff,passband,plot,plotlab,
              clobber,verbose,logfile,status,cmdLine=False): 

## startup parameters

    status = 0
    numpy.seterr(all="ignore") 
    labelsize = 24
    ticksize = 16
    xsize = 16
    ysize = 6
    lcolor = '#0000ff'
    lwidth = 1.0
    fcolor = '#ffff00'
    falpha = 0.2

## log the call 

    hashline = '----------------------------------------------------------------------------'
    kepmsg.log(logfile,hashline,verbose)
    call = 'KEPFILTER -- '
    call += 'infile='+infile+' '
    call += 'outfile='+outfile+' '
    call += 'datacol='+str(datacol)+' '
    call += 'function='+str(function)+' '
    call += 'cutoff='+str(cutoff)+' '
    call += 'passband='+str(passband)+' '
    plotit = 'n'
    if (plot): plotit = 'y'
    call += 'plot='+plotit+ ' '
    call += 'plotlab='+str(plotlab)+' '
    overwrite = 'n'
    if (clobber): overwrite = 'y'
    call += 'clobber='+overwrite+ ' '
    chatter = 'n'
    if (verbose): chatter = 'y'
    call += 'verbose='+chatter+' '
    call += 'logfile='+logfile
    kepmsg.log(logfile,call+'\n',verbose)

## start time

    kepmsg.clock('KEPFILTER started at',logfile,verbose)

## test log file

    logfile = kepmsg.test(logfile)

## clobber output file

    if clobber: status = kepio.clobber(outfile,logfile,verbose)
    if kepio.fileexists(outfile): 
	    message = 'ERROR -- KEPFILTER: ' + outfile + ' exists. Use clobber=yes'
	    status = kepmsg.err(logfile,message,verbose)

## open input file

    if status == 0:
        instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
        tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr,infile,logfile,verbose,status)
    if status == 0:
        try:
            work = instr[0].header['FILEVER']
            cadenom = 1.0
        except:
            cadenom = cadence

## fudge non-compliant FITS keywords with no values

    if status == 0:
        instr = kepkey.emptykeys(instr,file,logfile,verbose)

## read table structure

    if status == 0:
	table, status = kepio.readfitstab(infile,instr[1],logfile,verbose)

# read time and flux columns

    if status == 0:
        barytime, status = kepio.readtimecol(infile,table,logfile,verbose)
        flux, status = kepio.readsapcol(infile,table,logfile,verbose)

# filter input data table

    if status == 0:
        try:
            nanclean = instr[1].header['NANCLEAN']
        except:
            naxis2 = 0
            for i in range(len(table.field(0))):
                if (numpy.isfinite(barytime[i]) and numpy.isfinite(flux[i]) and flux[i] != 0.0):
                    table[naxis2] = table[i]
                    naxis2 += 1
            instr[1].data = table[:naxis2]
            comment = 'NaN cadences removed from data'
            status = kepkey.new('NANCLEAN',True,comment,instr[1],outfile,logfile,verbose)

## read table columns

    if status == 0:
        intime, status = kepio.readtimecol(infile,instr[1].data,logfile,verbose)
    if status == 0:
	indata, status = kepio.readfitscol(infile,instr[1].data,datacol,logfile,verbose)
    if status == 0:
        intime = intime + bjdref
        indata = indata / cadenom

## define data sampling

    if status == 0:
        tr = 1.0 / (cadence / 86400)
        timescale = 1.0 / (cutoff / tr)

## define convolution function

    if status == 0:
        if function == 'boxcar':
            filtfunc = numpy.ones(numpy.ceil(timescale))
        elif function == 'gauss':
            timescale /= 2
            dx = numpy.ceil(timescale * 10 + 1)
            filtfunc = kepfunc.gauss()
            filtfunc = filtfunc([1.0,dx/2-1.0,timescale],linspace(0,dx-1,dx))
        elif function == 'sinc':
            dx = numpy.ceil(timescale * 12 + 1)
            fx = linspace(0,dx-1,dx)
            fx = fx - dx / 2 + 0.5
            fx /= timescale
            filtfunc = numpy.sinc(fx)
        filtfunc /= numpy.sum(filtfunc)

## pad time series at both ends with noise model

    if status == 0:
        ave, sigma  = kepstat.stdev(indata[:len(filtfunc)])
        padded = append(kepstat.randarray(np.ones(len(filtfunc)) * ave,
                                          np.ones(len(filtfunc)) * sigma), indata)
        ave, sigma  = kepstat.stdev(indata[-len(filtfunc):])
        padded = append(padded, kepstat.randarray(np.ones(len(filtfunc)) * ave,
                                                  np.ones(len(filtfunc)) * sigma))

## convolve data

    if status == 0:
        convolved = convolve(padded,filtfunc,'same')

## remove padding from the output array

    if status == 0:
        if function == 'boxcar':
            outdata = convolved[len(filtfunc):-len(filtfunc)]
        else:
            outdata = convolved[len(filtfunc):-len(filtfunc)]
            

## subtract low frequencies

    if status == 0 and passband == 'high':
        outmedian = median(outdata)
        outdata = indata - outdata + outmedian

## comment keyword in output file

    if status == 0:
        status = kepkey.history(call,instr[0],outfile,logfile,verbose)

## clean up x-axis unit

    if status == 0:
	intime0 = float(int(tstart / 100) * 100.0)
        if intime0 < 2.4e6: intime0 += 2.4e6
	ptime = intime - intime0
	xlab = 'BJD $-$ %d' % intime0

## clean up y-axis units

    if status == 0:
        pout = indata * 1.0
        pout2 = outdata * 1.0
	nrm = len(str(int(numpy.nanmax(pout))))-1
	pout = pout / 10**nrm
	pout2 = pout2 / 10**nrm
	ylab = '10$^%d$ %s' % (nrm, plotlab)

## data limits

	xmin = ptime.min()
	xmax = ptime.max()
	ymin = numpy.nanmin(pout)
	ymax = numpy.nanmax(pout)
	xr = xmax - xmin
	yr = ymax - ymin
        ptime = insert(ptime,[0],[ptime[0]]) 
        ptime = append(ptime,[ptime[-1]])
        pout = insert(pout,[0],[0.0]) 
        pout = append(pout,0.0)
        pout2 = insert(pout2,[0],[0.0]) 
        pout2 = append(pout2,0.0)

## plot light curve

    if status == 0 and plot:
        try:
            params = {'backend': 'png',
                      'axes.linewidth': 2.5,
                      'axes.labelsize': labelsize,
                      'axes.font': 'sans-serif',
                      'axes.fontweight' : 'bold',
                      'text.fontsize': 12,
                      'legend.fontsize': 12,
                      'xtick.labelsize': ticksize,
                      'ytick.labelsize': ticksize}
            rcParams.update(params)
        except:
            print('ERROR -- KEPFILTER: install latex for scientific plotting')
            status = 1
    if status == 0 and plot:
        pylab.figure(figsize=[xsize,ysize])
        pylab.clf()

## plot filtered data

        ax = pylab.axes([0.06,0.1,0.93,0.87])
        pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
        pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
        labels = ax.get_yticklabels()
        setp(labels, 'rotation', 90, fontsize=12)
        pylab.plot(ptime,pout,color='#ff9900',linestyle='-',linewidth=lwidth)
        fill(ptime,pout,color=fcolor,linewidth=0.0,alpha=falpha)
        if passband == 'low':
            pylab.plot(ptime[1:-1],pout2[1:-1],color=lcolor,linestyle='-',linewidth=lwidth)
        else:
            pylab.plot(ptime,pout2,color=lcolor,linestyle='-',linewidth=lwidth)
            fill(ptime,pout2,color=lcolor,linewidth=0.0,alpha=falpha)
	xlabel(xlab, {'color' : 'k'})
	ylabel(ylab, {'color' : 'k'})
	xlim(xmin-xr*0.01,xmax+xr*0.01)
        if ymin >= 0.0: 
            ylim(ymin-yr*0.01,ymax+yr*0.01)
        else:
            ylim(1.0e-10,ymax+yr*0.01)
        pylab.grid()
        
# render plot

        if cmdLine: 
            pylab.show()
        else: 
            pylab.ion()
            pylab.plot([])
            pylab.ioff()
	
## write output file

    if status == 0:
        for i in range(len(outdata)):
            instr[1].data.field(datacol)[i] = outdata[i]
        instr.writeto(outfile)
    
## close input file

    if status == 0:
        status = kepio.closefits(instr,logfile,verbose)	    

## end time

    if (status == 0):
	    message = 'KEPFILTER completed at'
    else:
	    message = '\nKEPFILTER aborted at'
    kepmsg.clock(message,logfile,verbose)