def __init__(self, input_file=None, params=None):
"""Initialize the LinearDiffusionModel."""
# Call ErosionModel's init
super(KinwaveModel, self).__init__(input_file=input_file,
params=params)
# Get input parameters: duration for a runoff (i.e., storm or snowmelt)
# event, interval of time from the end of one event to the next, and
# rate of runoff generation (in mm/hr) during an event.
self.runoff_duration = self.params['runoff__duration']
self.interstorm_duration = self.params['interstorm__duration']
self.runoff_rate = self.params['runoff__rate'] / 3.6e6
# A "cycle" is a runoff event plus the interlude before the next event.
self.cycle_duration = self.runoff_duration + self.interstorm_duration
# Runoff continues for some time after runoff generation ceases. Here
# we set the amount of time we actively calculate flow. After this
# time period, we ignore flow for the remainder of the cycle. But if
# the user-specified hydrograph duration is longer than our cycle, we
# truncate at the cycle duration, because we'll start computing flow
# again at the start of the next cycle.
self.hydrograph_duration = min(self.cycle_duration,
self.params['hydrograph__maximum_duration'])
# This variable keeps track of how far we are in one cycle.
self.current_time_in_cycle = 0.0
# Instantiate a KinwaveImplicitOverlandFlow
self.water_router = KinwaveImplicitOverlandFlow(self.grid)
def test_initialization():
"""Test initialization with various parameters."""
rg = RasterModelGrid((3, 4), xy_spacing=2.0)
rg.add_zeros("topographic__elevation", at="node")
kw = KinwaveImplicitOverlandFlow(rg)
# Make sure fields have been created
for field_name in kw._info:
if kw._info[field_name]["mapping"] == "node":
assert field_name in kw.grid.at_node
elif kw._info[field_name]["mapping"] == "link":
assert field_name in kw.grid.at_link
# Re-initialize, this time with fields already existing in the grid
# (this triggers the "if" instead of "else" in the field setup in init)
kw = KinwaveImplicitOverlandFlow(rg)
def test_first_iteration():
"""Test stuff that happens only on first iteration"""
# Create a basic ramp
rg = RasterModelGrid((10, 10), spacing=(2, 2))
rg.add_field("topographic__elevation", 0.1 * rg.node_y, at="node")
# Create component and run it
kw = KinwaveImplicitOverlandFlow(rg)
kw.run_one_step(1.0)
# Max gradient should be 0.1, and min should be zero
assert round(np.amax(kw.grid.at_link["topographic__gradient"]), 2) == 0.1
assert round(np.amin(kw.grid.at_link["topographic__gradient"]), 2) == 0.0
assert round(np.amax(kw.sqrt_slope), 3) == 0.316
assert round(np.amax(kw.grad_width_sum), 3) == 0.632
assert round(np.amax(kw.alpha), 3) == 15.811
def test_first_iteration():
"""Test stuff that happens only on first iteration"""
# Create a basic ramp
rg = RasterModelGrid((10,10), spacing=(2, 2))
rg.add_field('topographic__elevation', 0.1 * rg.node_y, at='node')
# Create component and run it
kw = KinwaveImplicitOverlandFlow(rg)
kw.run_one_step(1.0)
# Max gradient should be 0.1, and min should be zero
assert round(np.amax(kw.grid.at_link['topographic__gradient']), 2) == 0.1
assert round(np.amin(kw.grid.at_link['topographic__gradient']), 2) == 0.0
assert round(np.amax(kw.sqrt_slope), 3) == 0.316
assert round(np.amax(kw.grad_width_sum), 3) == 0.632
assert round(np.amax(kw.alpha), 3) == 15.811
def test_initialization():
"""Test initialization with various parameters.
"""
rg = RasterModelGrid((3, 4), 2.0)
rg.add_zeros('node', 'topographic__elevation')
kw = KinwaveImplicitOverlandFlow(rg)
# Make sure fields have been created
for field_name in kw._var_mapping:
if kw._var_mapping[field_name] == 'node':
assert field_name in kw.grid.at_node
elif kw._var_mapping[field_name] == 'link':
assert field_name in kw.grid.at_link
# Re-initialize, this time with fields already existing in the grid
# (this triggers the "if" instead of "else" in the field setup in init)
kw = KinwaveImplicitOverlandFlow(rg)
def test_curved_surface():
"""Test flow across a curved surface."""
# Create a grid
rg = RasterModelGrid((10,10), spacing=(2, 2))
rg.add_field('topographic__elevation', 3.*rg.node_x**2 + rg.node_y**2,
at='node')
# Create component and run it
kw = KinwaveImplicitOverlandFlow(rg)
for i in range(8):
kw.run_one_step(1.0, runoff_rate=0.001)
# The inflow discharge to each cell at steady state should equal the
# runoff rate times the "inflow" drainage area, which is the total drainage
# area minus the area of the cell itself. Here we'll test a column of core
# nodes across the middle of the domain.
area = rg.at_node['drainage_area']
runoff_rate = 0.001
unit_area = 4.0
for i in range(15, 95, 10):
assert round(kw.disch_in[i], 6) == round(runoff_rate * (area[i] - unit_area), 6)
def test_curved_surface():
"""Test flow across a curved surface."""
# Create a grid
rg = RasterModelGrid((10, 10), spacing=(2, 2))
rg.add_field("topographic__elevation",
3. * rg.node_x**2 + rg.node_y**2,
at="node")
# Create component and run it
kw = KinwaveImplicitOverlandFlow(rg)
for i in range(8):
kw.run_one_step(1.0, runoff_rate=0.001)
# The inflow discharge to each cell at steady state should equal the
# runoff rate times the "inflow" drainage area, which is the total drainage
# area minus the area of the cell itself. Here we'll test a column of core
# nodes across the middle of the domain.
area = rg.at_node["drainage_area"]
runoff_rate = 0.001
unit_area = 4.0
for i in range(15, 95, 10):
assert round(kw.disch_in[i],
6) == round(runoff_rate * (area[i] - unit_area), 6)
def test_steady_basic_ramp():
"""Run to steady state with basic ramp"""
# Create a basic ramp
rg = RasterModelGrid((10,10), spacing=(2, 2))
rg.add_field('topographic__elevation', 0.1 * rg.node_y, at='node')
# Create component and run it
kw = KinwaveImplicitOverlandFlow(rg)
for i in range(12):
kw.run_one_step(1.0, runoff_rate=0.001)
# Look at a column of nodes down the middle. The inflow from uphill should
# be, from top to bottom: 0, 0.004, 0.008, 0.012, 0.016, 0.02, 0.024, 0.028
assert_equal(kw.disch_in[85], 0.0)
assert_equal(round(kw.disch_in[75], 3), 0.004)
assert_equal(round(kw.disch_in[65], 3), 0.008)
assert_equal(round(kw.disch_in[55], 3), 0.012)
assert_equal(round(kw.disch_in[45], 3), 0.016)
assert_equal(round(kw.disch_in[35], 3), 0.020)
assert_equal(round(kw.disch_in[25], 3), 0.024)
assert_equal(round(kw.disch_in[15], 3), 0.028)
# Try with passing in runoff
kw = KinwaveImplicitOverlandFlow(rg, runoff_rate=360.0)
kw.depth[:] = 0.0
for i in range(22):
kw.run_one_step(1.0)
# Again, look at a column of nodes down the middle. The inflow from uphill
# should now be 1/10 of the prior example.
assert_equal(round(kw.disch_in[75], 4), 0.0004)
assert_equal(round(kw.disch_in[65], 4), 0.0008)
assert_equal(round(kw.disch_in[55], 4), 0.0012)
assert_equal(round(kw.disch_in[45], 4), 0.0016)
assert_equal(round(kw.disch_in[35], 4), 0.0020)
assert_equal(round(kw.disch_in[25], 4), 0.0024)
assert_equal(round(kw.disch_in[15], 4), 0.0028)
# Try with default runoff rate of 1 mm/hr = 2.78e-7 m/s
kw = KinwaveImplicitOverlandFlow(rg)
assert_equal(round(kw.runoff_rate * 1.0e7, 2), 2.78)
kw.depth[:] = 0.0
for i in range(18):
kw.run_one_step(10.0)
# Look at a column of nodes down the middle. The inflow from uphill should
# be, from top to bottom: 0, 0.004, 0.008, 0.012, 0.016, 0.02, 0.024, 0.028
assert_equal(kw.disch_in[85], 0.0)
assert_equal(round(kw.disch_in[75], 7), 0.0000011)
assert_equal(round(kw.disch_in[65], 7), 0.0000022)
assert_equal(round(kw.disch_in[55], 7), 0.0000033)
assert_equal(round(kw.disch_in[45], 7), 0.0000044)
assert_equal(round(kw.disch_in[35], 7), 0.0000055)
assert_equal(round(kw.disch_in[25], 7), 0.0000066)
assert_equal(round(kw.disch_in[15], 7), 0.0000077)
def test_steady_basic_ramp():
"""Run to steady state with basic ramp"""
# Create a basic ramp
rg = RasterModelGrid((10, 10), spacing=(2, 2))
rg.add_field("topographic__elevation", 0.1 * rg.node_y, at="node")
# Create component and run it
kw = KinwaveImplicitOverlandFlow(rg)
for i in range(12):
kw.run_one_step(1.0, runoff_rate=0.001)
# Look at a column of nodes down the middle. The inflow from uphill should
# be, from top to bottom: 0, 0.004, 0.008, 0.012, 0.016, 0.02, 0.024, 0.028
assert kw.disch_in[85] == 0.0
assert round(kw.disch_in[75], 3) == 0.004
assert round(kw.disch_in[65], 3) == 0.008
assert round(kw.disch_in[55], 3) == 0.012
assert round(kw.disch_in[45], 3) == 0.016
assert round(kw.disch_in[35], 3) == 0.020
assert round(kw.disch_in[25], 3) == 0.024
assert round(kw.disch_in[15], 3) == 0.028
# Try with passing in runoff
kw = KinwaveImplicitOverlandFlow(rg, runoff_rate=360.0)
kw.depth[:] = 0.0
for i in range(22):
kw.run_one_step(1.0)
# Again, look at a column of nodes down the middle. The inflow from uphill
# should now be 1/10 of the prior example.
assert round(kw.disch_in[75], 4) == 0.0004
assert round(kw.disch_in[65], 4) == 0.0008
assert round(kw.disch_in[55], 4) == 0.0012
assert round(kw.disch_in[45], 4) == 0.0016
assert round(kw.disch_in[35], 4) == 0.0020
assert round(kw.disch_in[25], 4) == 0.0024
assert round(kw.disch_in[15], 4) == 0.0028
# Try with default runoff rate of 1 mm/hr = 2.78e-7 m/s
kw = KinwaveImplicitOverlandFlow(rg)
assert round(kw.runoff_rate * 1.0e7, 2) == 2.78
kw.depth[:] = 0.0
for i in range(18):
kw.run_one_step(10.0)
# Look at a column of nodes down the middle. The inflow from uphill should
# be, from top to bottom: 0, 0.004, 0.008, 0.012, 0.016, 0.02, 0.024, 0.028
assert kw.disch_in[85] == 0.0
assert round(kw.disch_in[75], 7) == 0.0000011
assert round(kw.disch_in[65], 7) == 0.0000022
assert round(kw.disch_in[55], 7) == 0.0000033
assert round(kw.disch_in[45], 7) == 0.0000044
assert round(kw.disch_in[35], 7) == 0.0000055
assert round(kw.disch_in[25], 7) == 0.0000066
assert round(kw.disch_in[15], 7) == 0.0000077
# +
plt.figure(1)
plt.plot(hydrograph_time, discharge_at_outlet, "r-", label="outlet")
plt.ylabel("Discharge (cms)")
plt.xlabel("Time (hour)")
plt.legend(loc="upper right")
title_text = f"Hydrograph ({dem_path.split('/')[-1].split('.')[0]})"
plt.title(title_text)
plt.show()
# -
# ### Run/Loop Kinematic Wave Overland Flow Component
kw = KinwaveImplicitOverlandFlow(rmg,
runoff_rate=0.0,
roughness=n,
depth_exp=5 / 3)
# +
elapsed_time = 1
while elapsed_time < model_run_time_sec:
if elapsed_time < storm_duration_sec:
kw.runoff_rate = starting_precip_mmhr #This needs to be in mm/hr because the source code automatically converts to m/s
else:
kw.runoff_rate = 1e-20 #This needs to be > 0 because of an assertion in the source code...
kw.run_one_step(dt)
# add elapsed time to the continuos time
class KinwaveModel(_ErosionModel):
"""
A DrainageAreaModel simply computes drainage area on a raster-grid DEM.
"""
def __init__(self, input_file=None, params=None):
"""Initialize the LinearDiffusionModel."""
# Call ErosionModel's init
super(KinwaveModel, self).__init__(input_file=input_file,
params=params)
# Get input parameters: duration for a runoff (i.e., storm or snowmelt)
# event, interval of time from the end of one event to the next, and
# rate of runoff generation (in mm/hr) during an event.
self.runoff_duration = self.params['runoff__duration']
self.interstorm_duration = self.params['interstorm__duration']
self.runoff_rate = self.params['runoff__rate'] / 3.6e6
# A "cycle" is a runoff event plus the interlude before the next event.
self.cycle_duration = self.runoff_duration + self.interstorm_duration
# Runoff continues for some time after runoff generation ceases. Here
# we set the amount of time we actively calculate flow. After this
# time period, we ignore flow for the remainder of the cycle. But if
# the user-specified hydrograph duration is longer than our cycle, we
# truncate at the cycle duration, because we'll start computing flow
# again at the start of the next cycle.
self.hydrograph_duration = min(self.cycle_duration,
self.params['hydrograph__maximum_duration'])
# This variable keeps track of how far we are in one cycle.
self.current_time_in_cycle = 0.0
# Instantiate a KinwaveImplicitOverlandFlow
self.water_router = KinwaveImplicitOverlandFlow(self.grid)
def run_one_step(self, dt):
"""
Advance model for one time-step of duration dt.
"""
self.water_router.run_one_step(dt)
def run_for(self, dt, runtime):
"""
Run model without interruption for a specified time period. This
involves
"""
remaining_time = runtime
remaining_time_in_cycle = (self.cycle_duration
- self.current_time_in_cycle)
while remaining_time > 0.0:
# If we're in the hydrograph part of the cycle, run a hydrograph.
if self.current_time_in_cycle < self.hydrograph_duration:
# Set the component's runoff rate according to whether it's
# still raining or not.
if self.current_time_in_cycle < self.runoff_duration:
self.water_router.runoff_rate = self.runoff_rate
else:
self.water_router.runoff_rate = 0.0
# Calculate time-step size: we adjust downward from dt if
# needed to make sure we don't exceed the runoff duration or
# the runtime.
delt = min(dt, remaining_time)
delt = min(delt, self.runoff_duration)
# Run some water flow
self.run_one_step(delt)
# Advance time
remaining_time -= delt
remaining_time_in_cycle -= delt
self.current_time_in_cycle += delt
# If we're in the "dry" part of a cycle, simply advance to either
# the beginning of the next cycle or the end of the "runtime"
# period, whichever is shorter.
else:
dry_time = min(remaining_time, remaining_time_in_cycle)
remaining_time -= dry_time
remaining_time_in_cycle -= dry_time
if remaining_time_in_cycle > 0.0:
self.current_time_in_cycle += dry_time
else:
self.current_time_in_cycle = 0.0 # start a new cycle
remaining_time_in_cycle = self.cycle_duration
