def __init__(self):
self.led1 = None
self.pwm1 = None
try:
self.led1 = led(248)
except ValueError:
self.pwm1 = Pwm(0, True, 0)
self.led2 = None
self.pwm2 = None
try:
self.led2 = led(249)
except ValueError:
#self.pwm2 = Pwm(1, True, 0)
pass
# Red is always on, green and blue don't work
# But the Tadpole does work for red and green using the same values
# I believe my Calamari is bad
self.led3 = rgb(82, 83, 208)
self.s1 = button(216, True)
self.s2 = button(227, True)
self.s3 = button(226, True)
# Need to test ssg, not working either...
self.sseg = Seg7()
# Requires Calamari kernel driver
self.adc = calamari_adc()
def check_config():
internet_connection = has_internet()
internet_light = led.led(20)
if internet_connection:
internet_light.on()
else:
internet_light.off()
try:
logger.write('Uploading status file...')
status_file = status.update_status(False, False, False)
status.upload_status(status_file, False)
logger.write('Upload complete.')
except Exception as e:
logger.write('An error occurred while uploading a status file.')
logger.write(str(e))
try:
logger.write('Cloud: Checking for new configuration.')
credential_path = 'credentials.ini'
credentials = configparser.ConfigParser()
credentials.read(credential_path)
username = credentials.get('Azure', 'Username')
password = credentials.get('Azure', 'Password')
blob_service = BlockBlobService(account_name=username, account_key=password)
generator = blob_service.list_blobs('configuration')
for b in generator:
timestamp = b.properties.last_modified
break
# The dumbest bullshit I have ever experienced
last_modified = datetime.datetime.fromtimestamp(os.path.getmtime('config.ini'))
last_modified = last_modified.replace(tzinfo=datetime.timezone.utc).astimezone(tz=datetime.timezone.utc)
last_modified += datetime.timedelta(hours=time.altzone / 60 / 60)
if timestamp > last_modified:
logger.write('Downloading new configuration.')
blob_service.get_blob_to_path('configuration', 'config.ini', 'config.ini')
logger.write('Rebooting...')
#TODO: Clean-up step
power = led.led(27)
gps = led.led(22)
internet = led.led(20)
power.off()
gps.off()
internet.off()
os.system('sudo reboot')
else:
logger.write('No new configuration found.')
except Exception as e:
logger.write(str(e))
logger.write('CheckConfig: There was an error connecting to the cloud.\n')
return
def indication(): # Функция Нахождения чисел
global mas, col_det, land
rospy.sleep(5.5)
col_det.Num = True
rospy.sleep(0.5)
print(col_det.number)
if col_det.number != -1:
led(col_det.number) # Индикация
d = col_det.message
mas[col_det.number] = 0
D_delivered(col_det.number, mas[col_det.number])
#print navigate(x=col_det.number_x, y=col_det.number_y, z=col_det.startz.range-0.1, speed=0.5, frame_id='aruco_map')
if land == True: # Посадка если мы это захотели
print navigate(x=0, y=0, z=-0.2, speed=0.5, frame_id='body')
rospy.sleep(1)
land()
rospy.sleep(10)
print navigate(x=0,
y=0,
z=1,
speed=0.5,
frame_id='body',
auto_arm=True)
rospy.sleep(5)
led(-1)
print(d)
def myISR(self, ev=None):
flag = 0
fire = "Active Fire"
gas = "No"
life = "No"
temp = "No"
self.flag = GPIO.input(self.FlamePin)
print(GPIO.input(self.FlamePin))
self.sensorStatus = "fire" + str(GPIO.input(self.FlamePin))
if self.sensorStatus == "fire1":
self.setstatus()
print("Flame is detected !")
led.led().ledOff(33)
led.led().ledOn(31)
buzzer.buzzer().controllRunOn(7)
print(str(datetime.datetime.now()))
print("\nReading TEMPRATURE of affected area")
temprature()
time.sleep(2)
print("\nDetecting Life in affected area")
if motion(22, 40, 38).flag == 1:
life = "Presence of life in the affected area"
time.sleep(2)
time.sleep(2)
flag = flag + 1
cam.cam("fire")
if flag != 0:
email().emailSend("fire.png", "/home/pi/project/fire.png", temp,
life, fire)
print("Mail Sended")
sms.sms("Number to send")
flag = 0
print("Detecting LPG lekage in area")
gasT.gas(38).grun()
buzzer.buzzer().controllRunOff(7)
def __init__(self):
self.full = led.led(11)
self.high = led.led(13)
self.nomask = led.led(15)
self.immask = led.led(7)
self.okay = led.led(19)
self.fullErrorOn()
sleep(0.2)
self.highErrorOn()
sleep(0.2)
self.noMaskErrorOn()
sleep(0.2)
self.imMaskErrorOn()
sleep(0.2)
self.okayOn()
sleep(1.2)
self.fullErrorOff()
sleep(0.2)
self.highErrorOff()
sleep(0.2)
self.noMaskErrorOff()
sleep(0.2)
self.imMaskErrorOff()
sleep(0.2)
self.okayOff()
def indication():
global mas, col_det, land
rospy.sleep(5.5)
col_det.Num = True
rospy.sleep(0.5)
print(col_det.number)
if col_det.number != -1:
led(col_det.number)
d = col_det.message
mas[col_det.number] = 0
D_delivered(col_det.number, mas[col_det.number])
#print navigate(x=col_det.number_x, y=col_det.number_y, z=col_det.startz.range-0.1, speed=0.5, frame_id='aruco_map')
if land == True:
print navigate(x=0, y=0, z=-0.2, speed=0.5, frame_id='body')
rospy.sleep(1)
land()
rospy.sleep(10)
print navigate(x=0,
y=0,
z=1,
speed=0.5,
frame_id='body',
auto_arm=True)
rospy.sleep(5)
led(-1)
print(d)
def indication():
global mas, col_det
rospy.sleep(3.5)
col_det.Num = True
rospy.sleep(0.5)
if col_det.number != -1:
led(col_det.number)
print navigate(x=self.x_dist,
y=self.y_dist,
z=self.startz.range - 0.1,
speed=0.5,
frame_id='aruco_map')
rospy.sleep(1)
land()
rospy.sleep(4)
led(-1)
rospy.sleep(2)
print navigate(x=0,
y=0,
z=1,
speed=0.5,
frame_id='body',
auto_arm=True)
rospy.sleep(3)
print(col_det.message)
D_delivered(col_det.number, mas[col_det.number])
mas[col_det.number] = 0
def __init__(self):
#オブジェクトの生成
self.rightmotor = motor.motor(ct.const.RIGHT_MOTOR_IN1_PIN,
ct.const.RIGHT_MOTOR_IN2_PIN,
ct.const.RIGHT_MOTOR_VREF_PIN)
self.leftmotor = motor.motor(ct.const.LEFT_MOTOR_IN1_PIN,
ct.const.LEFT_MOTOR_IN2_PIN,
ct.const.LEFT_MOTOR_VREF_PIN)
self.gps = gps.GPS()
self.bno055 = bno055.BNO055()
self.radio = radio.radio()
self.RED_LED = led.led(ct.const.RED_LED_PIN)
self.BLUE_LED = led.led(ct.const.BLUE_LED_PIN)
self.GREEN_LED = led.led(ct.const.GREEN_LED_PIN)
#開始時間の記録
self.startTime = time.time()
self.timer = 0
self.landstate = 0 #landing stateの中でモータを一定時間回すためにlandのなかでもステート管理するため
self.v_right = 100
self.v_left = 100
#変数
self.state = 0
self.laststate = 0
self.landstate = 0
#stateに入っている時刻の初期化
self.preparingTime = 0
self.flyingTime = 0
self.droppingTime = 0
self.landingTime = 0
self.pre_motorTime = 0
self.waitingTime = 0
self.runningTime = 0
self.goalTime = 0
#state管理用変数初期化
self.countPreLoop = 0
self.countFlyLoop = 0
self.countDropLoop = 0
self.countGoal = 0
self.countAreaLoopEnd = 0 # 終了判定用
self.countAreaLoopStart = 0 # 開始判定用
self.countAreaLoopLose = 0 # 見失い判定用
self.countgrass = 0
#GPIO設定
GPIO.setmode(GPIO.BCM) #GPIOの設定
GPIO.setup(ct.const.FLIGHTPIN_PIN, GPIO.IN) #フライトピン用
date = datetime.datetime.now()
self.filename = '{0:%Y%m%d}'.format(date)
self.filename_hm = '{0:%Y%m%d%H%M}'.format(date)
if not os.path.isdir(
'/home/pi/Desktop/wolvez2021/Testcode/EtoEtest/%s/' %
(self.filename)):
os.mkdir('/home/pi/Desktop/wolvez2021/Testcode/EtoEtest/%s/' %
(self.filename))
def __init__(self,
red_pin,
green_pin,
blue_pin,
red_low=False,
green_low=False,
blue_low=False):
self._r = led(red_pin, red_low)
self._g = led(green_pin, green_low)
self._b = led(blue_pin, blue_low)
def __init__(self, speech_object, led_lamp_object, led_magic_object, hand_object):
self.list_of_phrases = ("effects/20.mp3",
"welcome/5.mp3",
"effects/31.mp3")
self.hand_object = hand_object
self.led_lamp_object = led_lamp_object
self.led_magic_object = led_magic_object
self.speech_object = speech_object
self.pin = denexapp_config.super_button_pin
self.led_pin = denexapp_config.super_button_led_pin
self.phase_duration = denexapp_config.super_button_phase_duration
self.led_button_object = led.led(self.led_pin, denexapp_config.super_button_led_blink_period, invert=True)
self.current_phase = 0 # 1 - hand moving, 2 - hand moving + sphere lightning, 3 - hand+sphere+speech
self.presses_in_a_row = 0 # times button pressed in a row during one 'session'
self.button_blocked = False # deactivates button's affect on the robot
self.button_unblock_time = None # time when button's affect will be unblocked
self.processes_are_executing = False
self.led_button_object.start_blink()
self.phase_start_time = 0
self.is_magic_now = False
GPIO.setmode(GPIO.BCM)
GPIO.setup(self.pin, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # pin of button, takes 1 and 0
def __init__(self):
global ms
global c
global l
ms = motionSensor()
c = camera()
l = led()
def main():
r = sr.Recognizer()
# Instantiate IFTTT Webhooks object.
webhooks = ifttt_webhooks('402LsIog5lt0cMATLnmtb')
webhooks_keyword = 'activate '
# Instantiate led object.
red_led = led()
pg.mixer.init()
pg.mixer.music.load("../audio/can_i_help_you.wav")
pg.mixer.music.play()
while pg.mixer.music.get_busy() == True:
continue
while True:
with sr.Microphone() as source:
print("Speak Anything :")
audio = r.listen(source, None, 2)
try:
#TODO Use Sphynx since it's offline.
text = r.recognize_google(audio)
print("You said : {}".format(text))
if text.startswith(webhooks_keyword):
pg.mixer.init()
pg.mixer.music.load("../audio/noted.wav")
pg.mixer.music.play()
while pg.mixer.music.get_busy() == True:
continue
event_name = text[len(webhooks_keyword):]
webhooks.trig(event_name)
elif text.startswith('turn on'):
red_led.turn_on()
pg.mixer.init()
pg.mixer.music.load("../audio/activated.wav")
pg.mixer.music.play()
while pg.mixer.music.get_busy() == True:
continue
elif text.startswith('turn off'):
red_led.turn_off()
pg.mixer.init()
pg.mixer.music.load("../audio/shutting_down.wav")
pg.mixer.music.play()
while pg.mixer.music.get_busy() == True:
continue
elif text.startswith('goodbye'):
red_led.turn_off()
pg.mixer.init()
pg.mixer.music.load("../audio/goodbye.wav")
pg.mixer.music.play()
while pg.mixer.music.get_busy() == True:
continue
sys.exit(0)
except sr.UnknownValueError:
print("Google Speech Recognition could not understand audio")
except sr.RequestError as e:
print(
"Could not request results from Google Speech Recognition service; {0}"
.format(e))
def __init__(self, FlamePin):
self.FlamePin = FlamePin
print("Running")
GPIO.setmode(GPIO.BOARD)
GPIO.setup(self.FlamePin, GPIO.IN, pull_up_down=GPIO.PUD_UP)
led.led().ledOn(40)
buzzer.buzzer().run(7, 0.4)
led.led().ledOff(31)
led.led().ledOn(33)
def indication():
global mas, col_det
rospy.sleep(3.5)
col_det.Num = True
rospy.sleep(0.5)
if col_det.number != -1:
led(col_det.number)
print navigate(x=col_det.number_x,
y=col_det.number_y,
z=1.5,
speed=0.5,
frame_id='aruco_map')
rospy.sleep(5)
led(-1)
rospy.sleep(2)
print navigate(x=0,
y=0,
z=1,
speed=0.5,
frame_id='body',
auto_arm=True)
rospy.sleep(3)
print(col_det.message)
mas[col_det.number] = 0
def __init__(self, pir, red, green):
GPIO.setmode(GPIO.BOARD)
self.flag = 0
GPIO.setup(pir, GPIO.IN)
print("Waiting for sensor to settle")
time.sleep(2)
print("Detecting motion")
l = led.led()
for i in range(0, 10):
if GPIO.input(pir):
print("Motion Detected!")
self.flag = 1
self.sensorStatus = "motion1"
self.setstatus()
print("\nPassing control to GAS Sensor")
break
time.sleep(0.1)
def record(recording_length, path):
'''
Perform a recording of the designated length and save it to the designated path.
Returns true if the recording succeeds and false if there is an exception thrown.
'''
recording_light = led.led(17) # GPIO 16 = Recording LED
recording_light.on()
try:
os.system('arecord --device=hw:U22,0 --format S32_LE --rate 44100 --channels=2 --duration=' + str(recording_length) + ' ' + path + '.wav')
except Exception as e:
logger.write('An error occurred while recording.')
logger.write(str(e))
recording_light.off()
return False
recording_light.off()
return True
def setup_read_motion(self):
print("Connecting")
self.vehicle = connect('/dev/ttyS0',
wait_ready=True,
baud=57600,
rate=2,
use_native=True,
heartbeat_timeout=-1)
self.MODE = mode(self.vehicle)
self.CAMERA = detect()
self.led = led()
self.ROCK = rocking_wings(self.vehicle)
self.count = 0
self.flag = 0
self.flag_count = 25
self.dt = 0.1
self.RED_CIRCLE = 0
self.BLUE_SQUARE = 0
self.mode_thread = Scheduler(self.MODE.updateMode, 0.5)
self.rock_thread = Scheduler(self.ROCK.read_motion, 0.25)
self.mode_thread.start()
print("Complite Initial Setup")
self.led.flash_second(3)
def __init__(self, red_pin, green_pin, blue_pin, red_low=False, green_low=False, blue_low=False):
self._r = led(red_pin, red_low)
self._g = led(green_pin, green_low)
self._b = led(blue_pin, blue_low)
#!/usr/bin/env python import led led=led.led() led.blackout()
payment_state = 0
# 0 - no money, 1 - part of money, 2 - enough money
last_magic_time = time.time() - 2*dconfig.payment_afterpay_time
# last time of prediction
last_far_time = time.time() - 2 * (dconfig.repeat_time_far / 1000)
# last time of speech when user is far
last_close_time = time.time() - 2 * (dconfig.repeat_time_close / 1000)
# last time of speech when user is close
last_close_state_time = time.time() - 2 * dconfig.user_gone_timeout / 1000
last_far_state_time = time.time() - 2 * dconfig.user_gone_timeout / 1000
# camera_object = camera.camera()
hand_object = hand.hand()
breathing_object = breathing.breathing()
speech_object = speech.speech()
led_payment_object = led.led(dconfig.led_payment_pin, dconfig.led_payment_period)
led_lamp_object = led.led(dconfig.led_lamp_pin, 0)
led_waiting_object = led.led(dconfig.led_waiting_pin, 0)
led_magic_object = led.led(dconfig.led_magic_pin, 0)
led_card_object = led.led(dconfig.led_card_pin, 0)
motion_detector_object = motion_detector.motion_detector(
dconfig.motion_detector_pin, dconfig.motion_detector_power_pin)
card_dispenser_object = card_dispenser.card_dispenser()
money_acceptor_object = money_acceptor.money_acceptor()
gsm_object = gsm.gsm(money_acceptor_object, card_dispenser_object)
ups_object = ups.ups(gsm_object)
super_button_object = super_button.SuperButton(speech_object, led_lamp_object, led_magic_object, hand_object)
super_button_object.activate_button()
ups_object.start_monitoring()
def test_1_needs_2_leds(self):
self.assertEqual(2, led(1))
def test_11_needs_4_leds(self):
self.assertEqual(4, led(11))
def test_9_needs_6_leds(self):
self.assertEqual(6, led(9))
def __init__(self): led.led().ledOff(29) led.led().ledOff(31) led.led().ledOff(33) led.led().ledOff(40) GPIO.cleanup()
def led_off():
led(LEDPINS, False, -1)
return render_template('led_off.html')
def __init__(self):
self.evt = event.Event()
self.motion = motion.Motion() #sencor class
self.shoot = shoot.Shoot() #actuator class
self.upload = upload.Upload() #actuator class
self.led = led.led()
def subroutine():
res = requests.get("http://e5b95c82.ngrok.io/testImage")
print res.content
led(res.content)
def upload_recording(filename: str, config):
upload_light = led.led(16) # GPIO 20 is the Uploading indicator
upload_light.on()
try:
logger.write('Uploading status file...')
status_file = status.update_status(False, True, False)
status.upload_status(status_file, False)
logger.write('Upload complete.')
except Exception as e:
logger.write('An error occurred while uploading a status file.')
logger.write(str(e))
try:
start = time.time()
logger.write('Uploading...')
credential_path = 'credentials.ini'
credentials = configparser.ConfigParser()
credentials.read(credential_path)
container = config.get('Cloud', 'container')
username = credentials.get('Azure', 'Username')
password = credentials.get('Azure', 'Password')
block_blob_service = BlockBlobService(account_name=username, account_key=password)
# Force chunked uploading and set upload block sizes to 8KB
block_blob_service.MAX_SINGLE_PUT_SIZE=16
block_blob_service.MAX_BLOCK_SIZE=8*1024
timestamp = os.path.basename(filename).split('.')[0]
extension = os.path.basename(filename).split('.')[1]
timestamp_day = timestamp.split('_')[1]
timestamp_time = timestamp.split('_')[2]
timestamp_day = timestamp_day.replace('-', '_')
timestamp_time = timestamp_time.replace('-', '_')
blob_name = timestamp_day + '/' + timestamp_time + '/recording.' + extension
block_blob_service.create_blob_from_path(container, blob_name, filename)
end = time.time()
elapsed = end - start
logger.write('Upload Succeeded: ' + blob_name)
logger.write('Upload took ' + str(elapsed) + ' seconds.\n')
if REMOVE_RECORDINGS:
os.remove(filename)
except Exception as e:
logger.write('CheckConfig: There was an error uploading to the cloud.')
logger.write(str(e))
upload_light.off()
return
upload_light.off()
logger.write('Upload complete')
try:
logger.write('Uploading status file...')
status_file = status.update_status(False, False, False)
status.upload_status(status_file, False)
logger.write('Upload complete.')
except Exception as e:
logger.write('An error occurred while uploading a status file.')
logger.write(str(e))
import sam import led led.led_h() led.led_h() led.led() sam.gcd(2, 20)
if out is True:
return red,green,blue
green=255
for red in range(0,255):
if cc==val:
out=True
break
green=green-1
cc=cc+1
if out is True:
return red,green,blue
else:
return 255,0,0
print "Server-Url:\t{0}\nReload every\t{1} Sec\n".format(TEMPURL,SLEEPTIME)
led=led()
reqnum=1
try:
while True:
data=urllib2.urlopen(TEMPURL).read()
xml=minidom.parseString(data)
temp=xml_get_tag_data("temp",xml)
timestamp=xml_get_tag_data("timestamp",xml)
temp_col=int(round(range_convert(temp,MIN_TEMP,MAX_TEMP)))
date_human=time.strftime("%d.%m.%Y %H:%M:%S",time.gmtime(timestamp))
r,g,b=col(temp_col)
led.rgbw(r,g,b)
print "#{3}\t{0}\t{1}°C\t\tscore={2}/512".format(date_human,temp,temp_col,reqnum)
reqnum=reqnum+1
time.sleep(SLEEPTIME)
def __init__(self, neopixels_instance, opts={}, leds=[]):
self.pixels = neopixels_instance
if len(leds) == 0:
self.leds = [led(self.pixels, i, opts) for i in range(NUMPIXELS)]
else:
self.leds = leds
def test_0_needs_6_leds(self):
self.assertEqual(6, led(0))
def update_status(is_recording, is_uploading, fatal_error):
'''
GPS Coordinates
Temperature
IsRecording
IsUploading
'''
latitude = '?'
longitude = '?'
try:
gps_light = led.led(22)
logger.write('Synchronizing clock with GPS...')
fix, current_time, latitude, longitude = gpsutil.getGPSInfo()
if fix == True:
logger.write('GPS Fix established.')
gps_light.on()
try:
os.system('sudo date -s ' + current_time)
except Exception as e:
logger.write(str(e))
pass
else:
logger.write('GPS Fix failed.')
latitude = '?'
longitude = '?'
gps_light.off()
except Exception as e:
logger.write('Something with the GPS raised an exception.')
logger.write(str(e))
gps_light.off()
fix = False
latitude = '?'
longitude = '?'
return
temp = '?'
try:
temp_sensor = MCP9808.MCP9808()
online = temp_sensor.begin()
if not online:
temp = '?'
else:
temp = temp_sensor.readTempC()
except Exception as e:
logger.write('Something with the temperature sensor raised an exception.')
logger.write(str(e))
status_file = open('status.ini', 'w')
status_file.writelines('''[GPS]
Latitude = %s
Longitude = %s
[Temperature]
Celsius = %s
[Status]
IsRecording = %s
IsUploading = %s
FatalError = %s
''' % (str(latitude), str(longitude), temp, str(is_recording), str(is_uploading), str(fatal_error)))
return 'status.ini'
def test_141_needs_8_leds(self):
self.assertEqual(8, led(141))
def subroutine():
res = requests.get("http://b4cdb600.ngrok.io/testImage")
print res.content
led(res.content)
def test_2_needs_5_leds(self):
self.assertEqual(5, led(2))
def test_3_needs_5_leds(self):
self.assertEqual(5, led(3))
def led_on(id):
led(LEDPINS, True, id)
return render_template('led_on.html')
def test_4_needs_4_leds(self):
self.assertEqual(4, led(4))
import led
import time
pin = int(input('Enter pin'))
period = int(input('Enter period'))
led_object = led.led(pin, period)
led_object.start_blink()
while True:
time.sleep(3)
def test_5_needs_5_leds(self):
self.assertEqual(5, led(5))
def __init__(self, top=None):
'''This class configures and populates the toplevel window.
top is the toplevel containing window.'''
_bgcolor = '#d9d9d9' # X11 color: 'gray85'
_fgcolor = '#000000' # X11 color: 'black'
_compcolor = '#d9d9d9' # X11 color: 'gray85'
_ana1color = '#d9d9d9' # X11 color: 'gray85'
_ana2color = '#d9d9d9' # X11 color: 'gray85'
font9 = "-family {DejaVu Sans} -size 20 -weight bold -slant " \
"roman -underline 0 -overstrike 0"
top.geometry("600x450+491+150")
top.title("Admin")
led.led().ledOn(29)
self.master = top
self.Label1 = Label(top)
self.Label1.place(relx=0.18, rely=0.09, height=69, width=356)
self.Label1.configure(font=font9)
self.Label1.configure(text='''Admin Panel''')
self.Label1.configure(width=356)
self.Label2 = Label(top)
self.Label2.place(relx=0.22, rely=0.38, height=19, width=76)
self.Label2.configure(text='''User-ID :''')
self.Label2.configure(width=76)
self.Label3 = Label(top)
self.Label3.place(relx=0.2, rely=0.47, height=19, width=86)
self.Label3.configure(text='''Password :''')
self.Label3.configure(width=86)
self.userBox = Entry(top)
self.userBox.place(relx=0.38, rely=0.38, height=21, relwidth=0.31)
self.userBox.configure(background="white")
self.userBox.configure(font="TkFixedFont")
self.userBox.configure(width=186)
self.pwdBox = Entry(top)
self.pwdBox.place(relx=0.38, rely=0.47, height=21, relwidth=0.31)
self.pwdBox.configure(background="white")
self.pwdBox.configure(font="TkFixedFont")
self.pwdBox.configure(width=186)
self.pwdBox.configure(show="*")
self.loginbtn = Button(top)
self.loginbtn.place(relx=0.22, rely=0.58, height=27, width=97)
self.loginbtn.configure(activebackground="#d9d9d9")
self.loginbtn.configure(text='''Login''')
self.loginbtn.configure(width=97)
self.loginbtn.configure(command=self.login)
self.pwdbtn = Button(top)
self.pwdbtn.place(relx=0.52, rely=0.58, height=27, width=97)
self.pwdbtn.configure(activebackground="#d9d9d9")
self.pwdbtn.configure(text='''Cancel''')
self.pwdbtn.configure(width=97)
self.pwdbtn.configure(command=self.clear)
self.result = StringVar()
self.result.set("")
self.resultMessage = Label(top)
self.resultMessage.place(relx=0.22, rely=0.76, height=59, width=306)
self.resultMessage.configure(width=306)
self.resultMessage.configure(textvariable=self.result)
def test_6_needs_6_leds(self):
self.assertEqual(6, led(6))
# set up inputs GPIO.setmode(GPIO.BCM) GPIO.setup(18, GPIO.IN, pull_up_down=GPIO.PUD_UP) # blue button GPIO.setup(23, GPIO.IN, pull_up_down=GPIO.PUD_UP) # yellow button motorA = motor(17,27) motorB = motor(22,10) gyro=mpu6050() gyro.setFilter(2) greenLed = led(24) yellowLed = led(25) greenLed.on() yellowLed.off() # regulator settings Ta = 0.05 Time =120 / Ta regulator = pid() regulator.setKp(20) #regulator.setKi(0.2) #regulator.setKd(3) regulator.setTa(4*Ta) regulator.setMinMax(-100,100) regulator.setTarget(-1.2)
def test_7_needs_3_leds(self):
self.assertEqual(3, led(7))
def test_8_needs_7_leds(self):
self.assertEqual(7, led(8))
output_operation = graph.get_operation_by_name(output_name)
with tf.Session(graph=graph) as sess:
start = time.time()
results = sess.run(output_operation.outputs[0],
{input_operation.outputs[0]: t})
end = time.time()
results = np.squeeze(results)
top_k = results.argsort()[-5:][::-1]
labels = load_labels(label_file)
print('\nEvaluation time (1-image): {:.3f}s\n'.format(end - start))
template = "{} (score={:0.5f})"
led = led()
buzzer = buzzer()
email = email()
for i in top_k:
#print(template.format(labels[i], results[i]))
if (labels[i] == "shantanu" and results[i] >= 0.9):
print("Match Found For Shantanu")
led.run(13, 1)
buzzer.run(36, 0.5)
readWrite.csvWrite("babyMovents.csv", 1, 0, 0, 0, 0)
break
elif (labels[i] == "lion" and results[i] >= 0.9):
print("Match Found For Lion")
readWrite.csvWrite("babyMovents.csv", 0, 1, 0, 0, 0)
break
#!/usr/bin/python
from button import button
from led import led
from setup import setup
from loop import loop
# Open a file
fo = open("arduino.c", "w")
b = button(9)
le = led(12)
s = setup()
s.addComposant(b)
s.addComposant(le)
fo.write(str(s.arduino()))
lo = loop()
lo.addRead(["BUTTON9", "BUTTON10"])
lo.addActionIf(["BUTTON9", "BUTTON10"], "dualPush", ["active"], "LED12")
fo.write(str(lo.arduino()))
# Close opend file
fo.close()
def __init__(self): led.led().ledOn(29) commandCenter.fire(36).run()
