def fit_SMPLD(scans, smpl_pkl=None, gender='male', save_path=None, display=False):
# Get SMPL faces
sp = SmplPaths(gender=gender)
smpl_faces = sp.get_faces()
th_faces = torch.tensor(smpl_faces.astype('float32'), dtype=torch.long).cuda()
# Batch size
batch_sz = len(scans)
# Init SMPL
if smpl_pkl is None or smpl_pkl[0] is None:
print('SMPL not specified, fitting SMPL now')
pose, betas, trans = fit_SMPL(scans, None, gender, save_path, display)
else:
pose, betas, trans = [], [], []
for spkl in smpl_pkl:
smpl_dict = pkl.load(open(spkl, 'rb'), encoding='latin-1')
p, b, t = smpl_dict['pose'], smpl_dict['betas'], smpl_dict['trans']
pose.append(p)
if len(b) == 10:
temp = np.zeros((300,))
temp[:10] = b
b = temp.astype('float32')
betas.append(b)
trans.append(t)
pose, betas, trans = np.array(pose), np.array(betas), np.array(trans)
betas, pose, trans = torch.tensor(betas), torch.tensor(pose), torch.tensor(trans)
smpl = th_batch_SMPL(batch_sz, betas, pose, trans, faces=th_faces).cuda()
verts, _, _, _ = smpl()
init_smpl_meshes = [tm.from_tensors(vertices=v.clone().detach(),
faces=smpl.faces) for v in verts]
# Load scans
th_scan_meshes = []
for scan in scans:
th_scan = tm.from_obj(scan)
if save_path is not None:
th_scan.save_mesh(join(save_path, split(scan)[1]))
th_scan.vertices = th_scan.vertices.cuda()
th_scan.faces = th_scan.faces.cuda()
th_scan.vertices.requires_grad = False
th_scan_meshes.append(th_scan)
# Optimize
optimize_offsets(th_scan_meshes, smpl, init_smpl_meshes, 5, 10)
print('Done')
verts, _, _, _ = smpl()
th_smpl_meshes = [tm.from_tensors(vertices=v,
faces=smpl.faces) for v in verts]
if save_path is not None:
if not exists(save_path):
os.makedirs(save_path)
names = [split(s)[1] for s in scans]
# Save meshes
save_meshes(th_smpl_meshes, [join(save_path, n.replace('.obj', '_smpld.obj')) for n in names])
save_meshes(th_scan_meshes, [join(save_path, n) for n in names])
# Save params
for p, b, t, d, n in zip(smpl.pose.cpu().detach().numpy(), smpl.betas.cpu().detach().numpy(),
smpl.trans.cpu().detach().numpy(), smpl.offsets.cpu().detach().numpy(), names):
smpl_dict = {'pose': p, 'betas': b, 'trans': t, 'offsets': d}
pkl.dump(smpl_dict, open(join(save_path, n.replace('.obj', '_smpld.pkl')), 'wb'))
return smpl.pose.cpu().detach().numpy(), smpl.betas.cpu().detach().numpy(), \
smpl.trans.cpu().detach().numpy(), smpl.offsets.cpu().detach().numpy()
def fit_SMPLX(scans,
pose_files=None,
gender='male',
save_path=None,
display=None):
"""
:param save_path:
:param scans: list of scan paths
:param pose_files:
:return:
"""
# Get SMPL faces
sp = SmplPaths(gender=gender)
smpl_faces = sp.get_faces()
th_faces = torch.tensor(smpl_faces.astype('float32'),
dtype=torch.long).cuda()
# Batch size
batch_sz = len(scans)
# Set optimization hyper parameters
iterations, pose_iterations, steps_per_iter, pose_steps_per_iter = 3, 2, 30, 30
if False:
"""Test by loading GT SMPL params"""
betas, pose, trans = torch.tensor(
GT_SMPL['betas'].astype('float32')).unsqueeze(0), torch.tensor(
GT_SMPL['pose'].astype('float32')).unsqueeze(0), torch.zeros(
(batch_sz, 3))
else:
prior = get_prior(gender=gender)
pose_init = torch.zeros((batch_sz, 72))
pose_init[:, 3:] = prior.mean
betas, pose, trans = torch.zeros(
(batch_sz, 300)), pose_init, torch.zeros((batch_sz, 3))
# Init SMPL, pose with mean smpl pose, as in ch.registration
smpl = th_batch_SMPL(batch_sz, betas, pose, trans, faces=th_faces).cuda()
# Load scans and center them. Once smpl is registered, move it accordingly.
# Do not forget to change the location of 3D joints/ landmarks accordingly.
th_scan_meshes, centers = [], []
for scan in scans:
print('scan path ...', scan)
th_scan = tm.from_obj(scan)
# cent = th_scan.vertices.mean(axis=0)
# centers.append(cent)
# th_scan.vertices -= cent
th_scan.vertices = th_scan.vertices.cuda()
th_scan.faces = th_scan.faces.cuda()
th_scan.vertices.requires_grad = False
th_scan.cuda()
th_scan_meshes.append(th_scan)
# Load pose information if pose file is given
# Bharat: Shouldn't we structure th_pose_3d as [key][batch, ...] as opposed to current [batch][key]? See batch_get_pose_obj() in body_objectives.py
th_pose_3d = None
if pose_files is not None:
th_no_right_hand_visible, th_no_left_hand_visible, th_pose_3d = [], [], []
for pose_file in pose_files:
with open(pose_file) as f:
pose_3d = json.load(f)
th_no_right_hand_visible.append(
np.max(
np.array(pose_3d['hand_right_keypoints_3d']).reshape(
-1, 4)[:, 3]) < HAND_VISIBLE)
th_no_left_hand_visible.append(
np.max(
np.array(pose_3d['hand_left_keypoints_3d']).reshape(
-1, 4)[:, 3]) < HAND_VISIBLE)
pose_3d['pose_keypoints_3d'] = torch.from_numpy(
np.array(pose_3d['pose_keypoints_3d']).astype(
np.float32).reshape(-1, 4))
pose_3d['face_keypoints_3d'] = torch.from_numpy(
np.array(pose_3d['face_keypoints_3d']).astype(
np.float32).reshape(-1, 4))
pose_3d['hand_right_keypoints_3d'] = torch.from_numpy(
np.array(pose_3d['hand_right_keypoints_3d']).astype(
np.float32).reshape(-1, 4))
pose_3d['hand_left_keypoints_3d'] = torch.from_numpy(
np.array(pose_3d['hand_left_keypoints_3d']).astype(
np.float32).reshape(-1, 4))
th_pose_3d.append(pose_3d)
prior_weight = get_prior_weight(th_no_right_hand_visible,
th_no_left_hand_visible).cuda()
# Optimize pose first
optimize_pose_only(th_scan_meshes,
smpl,
pose_iterations,
pose_steps_per_iter,
th_pose_3d,
prior_weight,
display=None if display is None else 0)
# Optimize pose and shape
optimize_pose_shape(th_scan_meshes,
smpl,
iterations,
steps_per_iter,
th_pose_3d,
display=None if display is None else 0)
verts, _, _, _ = smpl()
th_smpl_meshes = [
tm.from_tensors(vertices=v, faces=smpl.faces) for v in verts
]
if save_path is not None:
if not exists(save_path):
os.makedirs(save_path)
names = [split(s)[1] for s in scans]
# Save meshes
save_meshes(
th_smpl_meshes,
[join(save_path, n.replace('.obj', '_smpl.obj')) for n in names])
save_meshes(th_scan_meshes, [join(save_path, n) for n in names])
# Save params
for p, b, t, n in zip(smpl.pose.cpu().detach().numpy(),
smpl.betas.cpu().detach().numpy(),
smpl.trans.cpu().detach().numpy(), names):
smpl_dict = {'pose': p, 'betas': b, 'trans': t}
pkl.dump(
smpl_dict,
open(join(save_path, n.replace('.obj', '_smpl.pkl')), 'wb'))
return smpl.pose.cpu().detach().numpy(), smpl.betas.cpu().detach(
).numpy(), smpl.trans.cpu().detach().numpy()
def fit_SMPL(scans, scan_labels, gender='male', save_path=None, scale_file=None, display=None):
"""
:param save_path:
:param scans: list of scan paths
:param pose_files:
:return:
"""
# Get SMPL faces
sp = SmplPaths(gender=gender)
smpl_faces = sp.get_faces()
th_faces = torch.tensor(smpl_faces.astype('float32'), dtype=torch.long).to(DEVICE)
# Load SMPL parts
part_labels = pkl.load(open('/BS/bharat-3/work/IPNet/assets/smpl_parts_dense.pkl', 'rb'))
labels = np.zeros((6890,), dtype='int32')
for n, k in enumerate(part_labels):
labels[part_labels[k]] = n
labels = torch.tensor(labels).unsqueeze(0).to(DEVICE)
# Load scan parts
scan_part_labels = []
for sc_l in scan_labels:
temp = torch.tensor(np.load(sc_l).astype('int32')).to(DEVICE)
scan_part_labels.append(temp)
# Batch size
batch_sz = len(scans)
# Set optimization hyper parameters
iterations, pose_iterations, steps_per_iter, pose_steps_per_iter = 3, 2, 30, 30
prior = get_prior(gender=gender, precomputed=True)
pose_init = torch.zeros((batch_sz, 72))
pose_init[:, 3:] = prior.mean
betas, pose, trans = torch.zeros((batch_sz, 300)), pose_init, torch.zeros((batch_sz, 3))
# Init SMPL, pose with mean smpl pose, as in ch.registration
smpl = th_batch_SMPL(batch_sz, betas, pose, trans, faces=th_faces).to(DEVICE)
smpl_part_labels = torch.cat([labels] * batch_sz, axis=0)
th_scan_meshes, centers = [], []
for scan in scans:
print('scan path ...', scan)
temp = Mesh(filename=scan)
th_scan = tm.from_tensors(torch.tensor(temp.v.astype('float32'), requires_grad=False, device=DEVICE),
torch.tensor(temp.f.astype('int32'), requires_grad=False, device=DEVICE).long())
th_scan_meshes.append(th_scan)
if scale_file is not None:
for n, sc in enumerate(scale_file):
dat = np.load(sc, allow_pickle=True)
th_scan_meshes[n].vertices += torch.tensor(dat[1]).to(DEVICE)
th_scan_meshes[n].vertices *= torch.tensor(dat[0]).to(DEVICE)
# Optimize pose first
optimize_pose_only(th_scan_meshes, smpl, pose_iterations, pose_steps_per_iter, scan_part_labels, smpl_part_labels,
display=None if display is None else 0)
# Optimize pose and shape
optimize_pose_shape(th_scan_meshes, smpl, iterations, steps_per_iter, scan_part_labels, smpl_part_labels,
display=None if display is None else 0)
verts, _, _, _ = smpl()
th_smpl_meshes = [tm.from_tensors(vertices=v, faces=smpl.faces) for v in verts]
if save_path is not None:
if not exists(save_path):
os.makedirs(save_path)
names = [split(s)[1] for s in scans]
# Save meshes
save_meshes(th_smpl_meshes, [join(save_path, n.replace('.ply', '_smpl.obj')) for n in names])
save_meshes(th_scan_meshes, [join(save_path, n) for n in names])
# Save params
for p, b, t, n in zip(smpl.pose.cpu().detach().numpy(), smpl.betas.cpu().detach().numpy(),
smpl.trans.cpu().detach().numpy(), names):
smpl_dict = {'pose': p, 'betas': b, 'trans': t}
pkl.dump(smpl_dict, open(join(save_path, n.replace('.ply', '_smpl.pkl')), 'wb'))
return smpl.pose.cpu().detach().numpy(), smpl.betas.cpu().detach().numpy(), smpl.trans.cpu().detach().numpy()
def fit_SMPLD(scans, smpl_pkl, gender='male', save_path=None, scale_file=None):
# Get SMPL faces
sp = SmplPaths(gender=gender)
smpl_faces = sp.get_faces()
th_faces = torch.tensor(smpl_faces.astype('float32'), dtype=torch.long).cuda()
# Batch size
batch_sz = len(scans)
# Init SMPL
pose, betas, trans = [], [], []
for spkl in smpl_pkl:
smpl_dict = pkl.load(open(spkl, 'rb'))
p, b, t = smpl_dict['pose'], smpl_dict['betas'], smpl_dict['trans']
pose.append(p)
if len(b) == 10:
temp = np.zeros((300,))
temp[:10] = b
b = temp.astype('float32')
betas.append(b)
trans.append(t)
pose, betas, trans = np.array(pose), np.array(betas), np.array(trans)
betas, pose, trans = torch.tensor(betas), torch.tensor(pose), torch.tensor(trans)
smpl = th_batch_SMPL(batch_sz, betas, pose, trans, faces=th_faces).cuda()
verts, _, _, _ = smpl()
init_smpl_meshes = [tm.from_tensors(vertices=v.clone().detach(),
faces=smpl.faces) for v in verts]
# Load scans
th_scan_meshes = []
for scan in scans:
print('scan path ...', scan)
temp = Mesh(filename=scan)
th_scan = tm.from_tensors(torch.tensor(temp.v.astype('float32'), requires_grad=False, device=DEVICE),
torch.tensor(temp.f.astype('int32'), requires_grad=False, device=DEVICE).long())
th_scan_meshes.append(th_scan)
if scale_file is not None:
for n, sc in enumerate(scale_file):
dat = np.load(sc, allow_pickle=True)
th_scan_meshes[n].vertices += torch.tensor(dat[1]).to(DEVICE)
th_scan_meshes[n].vertices *= torch.tensor(dat[0]).to(DEVICE)
# Optimize
optimize_offsets(th_scan_meshes, smpl, init_smpl_meshes, 5, 10)
print('Done')
verts, _, _, _ = smpl()
th_smpl_meshes = [tm.from_tensors(vertices=v,
faces=smpl.faces) for v in verts]
if save_path is not None:
if not exists(save_path):
os.makedirs(save_path)
names = [split(s)[1] for s in scans]
# Save meshes
save_meshes(th_smpl_meshes, [join(save_path, n.replace('.ply', '_smpld.obj')) for n in names])
save_meshes(th_scan_meshes, [join(save_path, n) for n in names])
# Save params
for p, b, t, d, n in zip(smpl.pose.cpu().detach().numpy(), smpl.betas.cpu().detach().numpy(),
smpl.trans.cpu().detach().numpy(), smpl.offsets.cpu().detach().numpy(), names):
smpl_dict = {'pose': p, 'betas': b, 'trans': t, 'offsets': d}
pkl.dump(smpl_dict, open(join(save_path, n.replace('.ply', '_smpld.pkl')), 'wb'))
return smpl.pose.cpu().detach().numpy(), smpl.betas.cpu().detach().numpy(), \
smpl.trans.cpu().detach().numpy(), smpl.offsets.cpu().detach().numpy()
def SMPLD_register(args):
cfg = config.load_config(args.config, 'configs/default.yaml')
out_dir = cfg['training']['out_dir']
generation_dir = os.path.join(out_dir, cfg['generation']['generation_dir'])
is_cuda = (torch.cuda.is_available() and not args.no_cuda)
device = torch.device("cuda" if is_cuda else "cpu")
if args.subject_idx >= 0 and args.sequence_idx >= 0:
logger, _ = create_logger(generation_dir, phase='reg_subject{}_sequence{}'.format(args.subject_idx, args.sequence_idx), create_tf_logs=False)
else:
logger, _ = create_logger(generation_dir, phase='reg_all', create_tf_logs=False)
# Get dataset
if args.subject_idx >= 0 and args.sequence_idx >= 0:
dataset = config.get_dataset('test', cfg, sequence_idx=args.sequence_idx, subject_idx=args.subject_idx)
else:
dataset = config.get_dataset('test', cfg)
batch_size = cfg['generation']['batch_size']
# Loader
test_loader = torch.utils.data.DataLoader(
dataset, batch_size=batch_size, num_workers=1, shuffle=False)
model_counter = defaultdict(int)
# Set optimization hyper parameters
iterations, pose_iterations, steps_per_iter, pose_steps_per_iter = 3, 2, 30, 30
inner_dists = []
outer_dists = []
for it, data in enumerate(tqdm(test_loader)):
idxs = data['idx'].cpu().numpy()
loc = data['points.loc'].cpu().numpy()
batch_size = idxs.shape[0]
# Directories to load corresponding informations
mesh_dir = os.path.join(generation_dir, 'meshes') # directory for posed and (optionally) unposed implicit outer/inner meshes
label_dir = os.path.join(generation_dir, 'labels') # directory for part labels
register_dir = os.path.join(generation_dir, 'registrations') # directory for part labels
if args.use_raw_scan:
scan_dir = dataset.dataset_folder # this is the folder that contains CAPE raw scans
else:
scan_dir = None
all_posed_minimal_meshes = []
all_posed_cloth_meshes = []
all_posed_vertices = []
all_unposed_vertices = []
scan_part_labels = []
for idx in idxs:
model_dict = dataset.get_model_dict(idx)
subset = model_dict['subset']
subject = model_dict['subject']
sequence = model_dict['sequence']
gender = model_dict['gender']
filebase = os.path.basename(model_dict['data_path'])[:-4]
folder_name = os.path.join(subset, subject, sequence)
# TODO: we assume batch size stays the same if one resumes the job
# can be more flexible to support different batch sizes before and
# after resume
register_file = os.path.join(register_dir, folder_name, filebase + 'minimal.registered.ply')
if os.path.exists(register_file):
# batch already computed, break
break
# points_dict = np.load(model_dict['data_path'])
# gender = str(points_dict['gender'])
mesh_dir_ = os.path.join(mesh_dir, folder_name)
label_dir_ = os.path.join(label_dir, folder_name)
if scan_dir is not None:
scan_dir_ = os.path.join(scan_dir, subject, sequence)
# Load part labels and vertex translations
label_file_name = filebase + '.minimal.npz'
label_dict = dict(np.load(os.path.join(label_dir_, label_file_name)))
labels = torch.tensor(label_dict['part_labels'].astype(np.int64)).to(device) # part labels for each vertex (14 or 24)
scan_part_labels.append(labels)
# Load minimal implicit surfaces
mesh_file_name = filebase + '.minimal.posed.ply'
# posed_mesh = Mesh(filename=os.path.join(mesh_dir_, mesh_file_name))
posed_mesh = trimesh.load(os.path.join(mesh_dir_, mesh_file_name), process=False)
posed_vertices = np.array(posed_mesh.vertices)
all_posed_vertices.append(posed_vertices)
posed_mesh = tm.from_tensors(torch.tensor(posed_mesh.vertices.astype('float32'), requires_grad=False, device=device),
torch.tensor(posed_mesh.faces.astype('int64'), requires_grad=False, device=device))
all_posed_minimal_meshes.append(posed_mesh)
mesh_file_name = filebase + '.minimal.unposed.ply'
if os.path.exists(os.path.join(mesh_dir_, mesh_file_name)) and args.init_pose:
# unposed_mesh = Mesh(filename=os.path.join(mesh_dir_, mesh_file_name))
unposed_mesh = trimesh.load(os.path.join(mesh_dir_, mesh_file_name), process=False)
unposed_vertices = np.array(unposed_mesh.vertices)
all_unposed_vertices.append(unposed_vertices)
if args.use_raw_scan:
# Load raw scans
mesh_file_name = filebase + '.ply'
# posed_mesh = Mesh(filename=os.path.join(scan_dir_, mesh_file_name))
posed_mesh = trimesh.load(os.path.join(scan_dir_, mesh_file_name), process=False)
posed_mesh = tm.from_tensors(torch.tensor(posed_mesh.vertices.astype('float32') / 1000, requires_grad=False, device=device),
torch.tensor(posed_mesh.faces.astype('int64'), requires_grad=False, device=device))
all_posed_cloth_meshes.append(posed_mesh)
else:
# Load clothed implicit surfaces
mesh_file_name = filebase + '.cloth.posed.ply'
# posed_mesh = Mesh(filename=os.path.join(mesh_dir_, mesh_file_name))
posed_mesh = trimesh.load(os.path.join(mesh_dir_, mesh_file_name), process=False)
posed_mesh = tm.from_tensors(torch.tensor(posed_mesh.vertices.astype('float32'), requires_grad=False, device=device),
torch.tensor(posed_mesh.faces.astype('int64'), requires_grad=False, device=device))
all_posed_cloth_meshes.append(posed_mesh)
if args.num_joints == 24:
bm = BodyModel(bm_path='body_models/smpl/male/model.pkl', num_betas=10, batch_size=batch_size).to(device)
parents = bm.kintree_table[0].detach().cpu().numpy()
labels = bm.weights.argmax(1)
# Convert 24 parts to 14 parts
smpl2ipnet = torch.from_numpy(SMPL2IPNET_IDX).to(device)
labels = smpl2ipnet[labels].clone().unsqueeze(0)
del bm
elif args.num_joints == 14:
with open('body_models/misc/smpl_parts_dense.pkl', 'rb') as f:
part_labels = pkl.load(f)
labels = np.zeros((6890,), dtype=np.int64)
for n, k in enumerate(part_labels):
labels[part_labels[k]] = n
labels = torch.tensor(labels).to(device).unsqueeze(0)
else:
raise ValueError('Got {} joints but umber of joints can only be either 14 or 24'.format(args.num_joints))
th_faces = torch.tensor(smpl_faces.astype('float32'), dtype=torch.long).to(device)
# We assume loaded meshes are properly scaled and offsetted to the orignal SMPL space,
if len(all_posed_minimal_meshes) > 0 and len(all_unposed_vertices) == 0:
# IPNet optimization without vertex traslation
# raise NotImplementedError('Optimization for IPNet is not implemented yet.')
if args.num_joints == 24:
for idx in range(len(scan_part_labels)):
scan_part_labels[idx] = smpl2ipnet[scan_part_labels[idx]].clone()
prior = get_prior(gender=gender, precomputed=True)
pose_init = torch.zeros((batch_size, 72))
pose_init[:, 3:] = prior.mean
betas, pose, trans = torch.zeros((batch_size, 10)), pose_init, torch.zeros((batch_size, 3))
# Init SMPL, pose with mean smpl pose, as in ch.registration
smpl = th_batch_SMPL(batch_size, betas, pose, trans, faces=th_faces, gender=gender).to(device)
smpl_part_labels = torch.cat([labels] * batch_size, axis=0)
# Optimize pose first
optimize_pose_only(all_posed_minimal_meshes, smpl, pose_iterations, pose_steps_per_iter, scan_part_labels,
smpl_part_labels, None, args)
# Optimize pose and shape
optimize_pose_shape(all_posed_minimal_meshes, smpl, iterations, steps_per_iter, scan_part_labels, smpl_part_labels,
None, args)
inner_vertices, _, _, _ = smpl()
# Optimize vertices for SMPLD
init_smpl_meshes = [tm.from_tensors(vertices=v.clone().detach(),
faces=smpl.faces) for v in inner_vertices]
optimize_offsets(all_posed_cloth_meshes, smpl, init_smpl_meshes, 5, 10, args)
outer_vertices, _, _, _ = smpl()
elif len(all_posed_minimal_meshes) > 0:
# NASA+PTFs optimization with vertex traslations
# Compute poses from implicit surfaces and correspondences
# TODO: we could also compute bone-lengths if we train PTFs to predict A-pose with a global translation
# that equals to the centroid of the pointcloud
poses = compute_poses(all_posed_vertices, all_unposed_vertices, scan_part_labels, parents, args)
# Convert 24 parts to 14 parts
for idx in range(len(scan_part_labels)):
scan_part_labels[idx] = smpl2ipnet[scan_part_labels[idx]].clone()
pose_init = torch.from_numpy(poses).float()
betas, pose, trans = torch.zeros((batch_size, 10)), pose_init, torch.zeros((batch_size, 3))
# Init SMPL, pose with mean smpl pose, as in ch.registration
smpl = th_batch_SMPL(batch_size, betas, pose, trans, faces=th_faces, gender=gender).to(device)
smpl_part_labels = torch.cat([labels] * batch_size, axis=0)
# Optimize pose first
optimize_pose_only(all_posed_minimal_meshes, smpl, pose_iterations, pose_steps_per_iter, scan_part_labels,
smpl_part_labels, None, args)
# Optimize pose and shape
optimize_pose_shape(all_posed_minimal_meshes, smpl, iterations, steps_per_iter, scan_part_labels, smpl_part_labels,
None, args)
inner_vertices, _, _, _ = smpl()
# Optimize vertices for SMPLD
init_smpl_meshes = [tm.from_tensors(vertices=v.clone().detach(),
faces=smpl.faces) for v in inner_vertices]
optimize_offsets(all_posed_cloth_meshes, smpl, init_smpl_meshes, 5, 10, args)
outer_vertices, _, _, _ = smpl()
else:
inner_vertices = outer_vertices = None
if args.use_raw_scan:
for i, idx in enumerate(idxs):
model_dict = dataset.get_model_dict(idx)
subset = model_dict['subset']
subject = model_dict['subject']
sequence = model_dict['sequence']
filebase = os.path.basename(model_dict['data_path'])[:-4]
folder_name = os.path.join(subset, subject, sequence)
register_dir_ = os.path.join(register_dir, folder_name)
if not os.path.exists(register_dir_):
os.makedirs(register_dir_)
if not os.path.exists(os.path.join(register_dir_, filebase + 'minimal.registered.ply')):
registered_mesh = trimesh.Trimesh(inner_vertices[i].detach().cpu().numpy().astype(np.float64), smpl_faces, process=False)
registered_mesh.export(os.path.join(register_dir_, filebase + 'minimal.registered.ply'))
if not os.path.exists(os.path.join(register_dir_, filebase + 'cloth.registered.ply')):
registered_mesh = trimesh.Trimesh(outer_vertices[i].detach().cpu().numpy().astype(np.float64), smpl_faces, process=False)
registered_mesh.export(os.path.join(register_dir_, filebase + 'cloth.registered.ply'))
else:
# Evaluate registered mesh
gt_smpl_mesh = data['points.minimal_smpl_vertices'].to(device)
gt_smpld_mesh = data['points.smpl_vertices'].to(device)
if inner_vertices is None:
# if vertices are None, we assume they already exist due to previous runs
inner_vertices = []
outer_vertices = []
for i, idx in enumerate(idxs):
model_dict = dataset.get_model_dict(idx)
subset = model_dict['subset']
subject = model_dict['subject']
sequence = model_dict['sequence']
filebase = os.path.basename(model_dict['data_path'])[:-4]
folder_name = os.path.join(subset, subject, sequence)
register_dir_ = os.path.join(register_dir, folder_name)
# registered_mesh = Mesh(filename=os.path.join(register_dir_, filebase + 'minimal.registered.ply'))
registered_mesh = trimesh.load(os.path.join(register_dir_, filebase + 'minimal.registered.ply'), process=False)
registered_v = torch.tensor(registered_mesh.vertices.astype(np.float32), requires_grad=False, device=device)
inner_vertices.append(registered_v)
# registered_mesh = Mesh(filename=os.path.join(register_dir_, filebase + 'cloth.registered.ply'))
registered_mesh = trimesh.load(os.path.join(register_dir_, filebase + 'cloth.registered.ply'), process=False)
registered_v = torch.tensor(registered_mesh.vertices.astype(np.float32), requires_grad=False, device=device)
outer_vertices.append(registered_v)
inner_vertices = torch.stack(inner_vertices, dim=0)
outer_vertices = torch.stack(outer_vertices, dim=0)
inner_dist = torch.norm(gt_smpl_mesh - inner_vertices, dim=2).mean(-1)
outer_dist = torch.norm(gt_smpld_mesh - outer_vertices, dim=2).mean(-1)
for i, idx in enumerate(idxs):
model_dict = dataset.get_model_dict(idx)
subset = model_dict['subset']
subject = model_dict['subject']
sequence = model_dict['sequence']
filebase = os.path.basename(model_dict['data_path'])[:-4]
folder_name = os.path.join(subset, subject, sequence)
register_dir_ = os.path.join(register_dir, folder_name)
if not os.path.exists(register_dir_):
os.makedirs(register_dir_)
logger.info('Inner distance for input {}: {} cm'.format(filebase, inner_dist[i].item()))
logger.info('Outer distance for input {}: {} cm'.format(filebase, outer_dist[i].item()))
if not os.path.exists(os.path.join(register_dir_, filebase + 'minimal.registered.ply')):
registered_mesh = trimesh.Trimesh(inner_vertices[i].detach().cpu().numpy().astype(np.float64), smpl_faces, process=False)
registered_mesh.export(os.path.join(register_dir_, filebase + 'minimal.registered.ply'))
if not os.path.exists(os.path.join(register_dir_, filebase + 'cloth.registered.ply')):
registered_mesh = trimesh.Trimesh(outer_vertices[i].detach().cpu().numpy().astype(np.float64), smpl_faces, process=False)
registered_mesh.export(os.path.join(register_dir_, filebase + 'cloth.registered.ply'))
inner_dists.extend(inner_dist.detach().cpu().numpy())
outer_dists.extend(outer_dist.detach().cpu().numpy())
logger.info('Mean inner distance: {} cm'.format(np.mean(inner_dists)))
logger.info('Mean outer distance: {} cm'.format(np.mean(outer_dists)))